Product Filter

15 items found in Veritas

Veritas Bench Dogs
Veritas Bench Dogs
  • $ 14.95
Quick View

Veritas Bench Dogs

Hand Tools

  • $ 14.95

Install in any bench by drilling 3/4" hole or using existing 3/4" dog holes.  Brass Bench Dogs are less damaging to your work than steel dogs but still have the strength you need for aggressive work.  The cross-hatched face is angled slightly inward at 2° to hold wood securely while the side spri...

Full Product Details

Veritas® 14 Degree Dovetail Marker
Veritas® 14 Degree Dovetail Marker
  • $ 5.95
Quick View

Veritas® 14 Degree Dovetail Marker

Hand Tools

  • $ 5.95

This 14 degree dovetail marker from Veritas measures 2" x 2" with reference edges on both sides for easy alignment.  These edged ride along the reference face, even when marking edge dovetails and feature small relieved corners to prevent misalignment if the edges of your board aren't perfectly c...

Full Product Details

Veritas® Brass Bevel Gauge
Veritas® Brass Bevel Gauge
  • $ 7.95
Quick View

Veritas® Brass Bevel Gauge

Hand Tools

  • $ 7.95

The bevel gauge from Veritas allows you to accurately gauge the bevel angle on most of your blades.  It is made of solid brass for long life but also will not damage the sharp edges of your tools.  The gauge measures 2-1/2" in diameter and has seven of the most commonly used angles: 15, 20, 25, 3...

Full Product Details

Veritas® Cornering Tool Set
Veritas® Cornering Tool Set
  • $ 37.95
Quick View

Veritas® Cornering Tool Set

Hand Tools

  • $ 37.95

These cornering tools from Veritas are a great way to ease the edges of your project quickly and consistently.  The tools have a different cutting radius on each end for a total of four radius options: 1/16", 1/8", 3/16" and 1/4".  They are ground in such a way that they are prevented from cuttin...

Full Product Details

Veritas® Crosscut Carcass Saw 14 TPI
Veritas® Crosscut Carcass Saw 14 TPI
  • $ 77.95
Quick View

Veritas® Crosscut Carcass Saw 14 TPI

Hand Tools

  • $ 77.95

The Crosscut Carcass saw from Veritas features a solid Bubinga handle an 11" long, high-carbon steel blade.  The blade is 0.02" thick and has a cutting depth of about 2-3/8".  The teeth have a 15° rake angle, included 60° angle and alternating 15° bevels with 0.003" of set per side.  The over-mol...

Full Product Details

Veritas® Double Edge Flush Trim Saw
Veritas® Double Edge Flush Trim Saw
  • $ 24.95
Quick View

Veritas® Double Edge Flush Trim Saw

Hand Tools

  • $ 24.95

The Double Edge Flush Trim Saw from Veritas makes short work of trimming wooden plugs flush to the surface of your project.  It features a 22 tpi Japanese tooth pattern which cuts on the pull stroke.  This allows the blade to be thinner and more flexible than a push cut saw which means less wood ...

Full Product Details

Sold out

Veritas® Dovetail Saw 14 TPI
Veritas® Dovetail Saw 14 TPI
  • $ 69.95
Quick View

Veritas® Dovetail Saw 14 TPI

Hand Tools

  • $ 69.95

14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...

Full Product Details

Veritas® Dovetail Saw 20 TPI
Veritas® Dovetail Saw 20 TPI
  • $ 69.95
Quick View

Veritas® Dovetail Saw 20 TPI

Hand Tools

  • $ 69.95

14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...

Full Product Details

Veritas® Honing Compound
Veritas® Honing Compound
  • $ 9.95
Quick View

Veritas® Honing Compound

Sharpening

  • $ 9.95

Blend of chromium and aluminum oxide to give best combination of cutting speed and fine finish Bonding formulated for ease of charging Leaves behind average size scratch pattern of 0.5 microns or .00002" Can be used for final honing of almost any tool 6 oz bar

Full Product Details

Sold out

Veritas® Imperial Std. Marking Gauge
Veritas® Imperial Std. Marking Gauge
  • $ 34.95
Quick View

Veritas® Imperial Std. Marking Gauge

Hand Tools

  • $ 34.95

Available with plain rod or rod graduated to 6" in 16ths Hardened steel wheel with single-sided bevel pulls gauge face against stock, maintaining accuracy Wheel retracts into gauge face for storage and protection Internal O-ring keeps light but constant friction on the rod Made in Canada Patented

Full Product Details

Veritas® Mk.II Honing Guide
Veritas® Mk.II Honing Guide
  • $ 59.95
Quick View

Veritas® Mk.II Honing Guide

Sharpening

  • $ 59.95

Veritas® Mk.II Standard Honing Guide Includes standard clamping head, straight roller base and angle registration jig Die-cast zinc alloy with precision-machined brass and steel components Hones bevel angles from 15° to 54° and back bevels from 10° to 20° Accepts blades between 1/2" and 2-7/8" ...

Full Product Details

Veritas® Skew Registration Jig for Mk.II Honing Guide
Veritas® Skew Registration Jig for Mk.II Honing Guide
  • $ 34.95
Quick View

Veritas® Skew Registration Jig for Mk.II Honing Guide

Hand Tools

  • $ 34.95

Locks into guide to set bevels and bevel angles (left- or right-hand) Machined aluminum base provides skew angle markings laser etched for accuracy and legibility Skew angle graduations cover range of 10° to 45° in 5° increments; additional marks (18°, 22°, 28°) cover angles of popular skew plan...

Full Product Details

Veritas® Small Crosscut Saw 16 TPI
Veritas® Small Crosscut Saw 16 TPI
  • $ 69.95
Quick View

Veritas® Small Crosscut Saw 16 TPI

Hand Tools

  • $ 69.95

14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...

Full Product Details

Veritas® Snug-Plug Cutter
Veritas® Snug-Plug Cutter
  • From $ 16.95
Quick View

Veritas® Snug-Plug Cutter

Drill Bits

  • $ 16.95

First 1/8" of plug is stated size (1/4", 5/16", etc.), then flares out at 3° included angle 3/8" round shank Cutters carefully reamed after hardening to ensure perfect concentricity Re-sharpening instructions included Patented

Full Product Details

Sold out

Veritas® Workshop Striking Knife
Veritas® Workshop Striking Knife
  • $ 11.95
Quick View

Veritas® Workshop Striking Knife

Hand Tools

  • $ 11.95

6-5/8" long overall A2 tool-steel blade has a 55° included angle at tip and is ground to a 25° bevel angle Blade is less than 1/32" thick and 5/16" wide and projects 1-1/2" from the handle Dual bevel makes it equally comfortable for right- or left-hand use Nylon-reinforced ABS handle is contoure...

Full Product Details