SuperMax 25-50 Drum Sander with Open Stand

$ 2,249

Have questions? Give us a call at 260-637-0054.

The SuperMax 25-50 Drum Sander now features an open stand design.

The 25-50 is the largest open-ended drum sander on the market. Sand 25″ in a single pass, and up to 50” in a double pass. Expand the scope of projects you’re able to complete while increasing speed and consistency in which you’re able to do them!

This sander features a simple alignment feature - just one nut will adjust the conveyor parallel to the sanding head, making aligning the conveyor to the sanding head fast and easy. When sanding stock wider than 25", the index lever will properly adjust the conveyor for flawless wide sanding.

INTELLISAND technology automatically adjusts conveyor speed based on load, preventing gouging, damaging, or burning stock. It also provides a consistent finish even with varying grain pattern and density.

The drum is pre-wrapped with 80 grit sandpaper. Additional accessories and sandpaper are available for purchase.

Compare Models > 

Shop 25-50 Abrasive Wraps >

  • 25" sanding in a single pass, 50" in a double pass!
  • More room for easy access to abrasives- no special tool needed
  • Simple alignment features adjusts conveyor parallel to the sanding head
  • Indexed alignment setting for narrow and wide stock
  • Index lever will adjust to stock wider than 25" for flawless wide sanding

Max. Sanding Width: 50″ (Two Passes)
Min. Sanding Length: 2-1/4″
Max. Sanding Thickness: 4″
Min. Sanding Thickness: 1/32″
Dimensions (D x W x H): 27″ x 46″ x 53″ (On Stand)
Drum: 5″ x 25″ Extruded Aluminum
Drum Speed: 1,740 RPM
Dust Hood: 1 – 4″ Vacuum Port, Min. 600 CFM Recommended
Conveyor Motor: 43 in.-lb torque, direct drive D.C. motor, ranged variable 0-10 FPM
Drive Motor (TEFC): 1-3/4hp
Power Requirements: 110 V 20 amp
Shipping Weight: 369 lbs. (3 boxes including stand)


Customer Reviews

Be the first to write a review