Hybrid Wood Protector is a genuine ‘monocoat’, suitable for coloring and protecting exterior wood in 1 single layer. The exterior oil finish protects wooden decks, patios, façades, doors, shutters, carports, garden furniture, gazebos, pergolas, etc. from discoloration and weathering. The easy application and maintenance makes this oil an exceptionally user-friendly product.
Based on RMC technology using integrated UV* stabilizer.
0% VOC, does not contain any water or solvents.
Suitable for almost all types of wood, can also be used for interior applications!
Available in 22 colors.
Easy to apply. Fast-drying.
Economical: minimum consumption.
Not film-forming. Does not peel or flake off.
Maintenance with the same product. No need for sanding!
*Pure does not contain UV stabilizers and will not provide color stability against the natural aging of wood.
**Color swatches shown on pine. Due to the many variations in monitors settings, actual color may vary slightly.
Note: When applied to horizontal surfaces, mix in 10% Oil Plus Part B, prior to application.
Note: Pure is non-pigmented. Natural is pigmented with yellow/white tones.
Spread Rate: 250-300 Sq ft/L Cure Time: 7 days VOC Content: 0% Dilutable: No Shelf Life: 36 months Warning: Do not allow to freeze
STEP 1: Remove all residues of old applications. Clean the surface using RMC Exterior Wood Cleaner. STEP 2: Stir the oil thoroughly before use. STEP 3: Once the cleaned surface is dry, apply a layer of RMC Hybrid Wood Protector with a flat brush. STEP 4: Leave to react for 10 minutes. Smooth the surface again with the same brush (without applying new product). STEP 5: After 5 minutes wipe off traces of excess product with a piece of cloth. STEP 6: Let dry for about 24 hours. Complete curing takes place after 7 days.
The preparation always has to be done with RMC products.
Never apply in direct sunlight or at temperatures under 10ºC.
Only work when weather conditions are dry.
Do not cover and do not place heavy objects on the wood until completely dry.
Horizontal surfaces need to be rubbed dry if they are exposed to rain within 24-36 hours after applying the oil.
STEP 1: Sand according to NWFA guidelines. Vacuum thoroughly, eliminate remains of dust with RMC Cleaner. STEP 2: Carefully add 10% of RMC Accelerator Comp. B to the oil. Stir thoroughly before use. STEP 3: Once the cleaned surface is dry, spread out a small quantity of the product with a cloth or brush. STEP 4: Leave to react during a few minutes. STEP 5: Thoroughly remove all excess of oil with a cloth. The surface should feel dry! STEP 6: Let dry for about 24 hours. Complete curing takes place after 7 days.