Rubio Monocoat Oil Plus Part A - 100ml (2C A only)
- Price
- $ 19.99
Have questions? Give us a call at 260-637-0054.
Oil Plus Part A - 100 ML's are perfect for sampling Oil Plus 2C wood finish colors. For durability testing or final application, we recommend using in conjunction with Part B Accelerator (30ml and 100ml available).
- 0% VOC, does not contain any water or solvents.
- It’s a natural wood finish because the oil is made of linseed.
- No overlaps or starting marks.
- Minimal use/High coverage: 30 - 50 sq. ft.
- Can be applied to almost all wood types.
Pure or Natural? Pure is non-pigmented. Natural is pigmented with yellow/white tones.
Oil Plus 2C is a plant-based hardwax oil wood finish that colors and protects in only 1 single layer! Oil Plus 2C works by forming a molecular bond with the topmost fibers of the wood. It protects wood from water, heat and daily wear & tear all while keeping the natural look and feel of the wood. It is the best oil for wood furniture, hardwood flooring, cabinetry, millwork, tables, and just about anything made out of wood!
2C stands for 2-component. Part A is the oil, and Part B is an accelerant and hardener. Oil Plus 2C is 0% VOC and does not contain solvents or water. It does not produce lap lines. It is easy to apply and maintain, and can be applied to all wood types. Oil Plus 2C is available in over 50 colors, which can all be mixed to create endless color possibilities.
Also available in 20ml sample bottles.
Note: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.
Specs
Spread Rate: 30-50 sq. ft.
Cure Time: Approx. 21 days
VOC Content: 0%
Dilutable: No
Shelf Life: 36 months
Warning: Rags saturated in oil can spontaneously combust and need to be disposed of in accordance with local regulations.
Directions
Furniture, stairs, and countertops :
- Sand the surface scratch-free, up to 120 or 150 grit. The color intensity depends on sanding, wood species, water popping, etc.
- Vacuum thoroughly, eliminate remains of dust with Rubio Monocoat Cleaner, and wait until the surface is completely dry (check the technical datasheet of Rubio Monocoat Cleaner before use).
- Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
- Spread out a small quantity of Rubio Monocoat Oil Plus 2C using the Rubio Monocoat Applicator Set. *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula in zones which can be finished within 15 minutes (including step 5). *For ceilings and walls, apply Rubio Monocoat Oil Plus 2C to the surface using a brush and spread using the Rubio Monocoat Applicator Set.
- Allow the applied oil to react with the wood for 3-5 minutes, during that time periodically work the oiled surface with the applicator pad to redistribute the applied oil and work it into the wood surface. Start wiping excess oil away around 10-15 minutes from applying it using a clean terry cloth. Make sure all excess oil has been removed within 30 minutes! The surface should feel dry to the touch upon completion.
Floors:
- Sand the surface scratch-free according to NWFA guidelines, up to 120 grit.
- Vacuum thoroughly then clean remaining dust using Rubio Monocoat Cleaner and wait until the surface is completely dry (check the technical datasheet of Rubio Monocoat Cleaner before use).
- Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
- Apply the oil to the perimeter of the room. Remove excess oil using a clean terry cloth within 10-15 minutes.
- Working in 50-100 ft² (5-10 m²) sections (or areas you can complete within 10-15 minutes), wipe the oil onto the wood and use a white or red buffer pad to equally spread the oil. Continue spreading the oil until the buffer pad no longer forms oil/ color rings. Complete steps 6 & 7 before starting a new section. *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula.
- Allowing a reaction time of at least 3-5 minutes, use a clean white buffer pad to remove all excess oil off the 50-100 ft.² (510 m²) section.
- Thoroughly remove all excess oil within 10-15 minutes of initial application by placing a clean terry cloth under a clean white buffer pad. If needed, remove all excess oil from v-grooves/bevels and holes by hand.
- Continue working in zones you can complete within 10-15 minutes. The surface should be dry to touch upon completion.
The Rubio products are great! I use them on all my projects!