The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table ensure a clear work area and improved finish. An extra large quill assembly with a full seven-inch stroke has three oversize bearings and the ability to tilt, adding versatility and ensuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.
| Style (Type) |
Shaper |
| Spindle Speed (RPM) |
3,000, 4,000, 6,000, 8,000, 10,000 |
| Maximum Spindle Diameter (In.) |
1-1/4 |
| Spindles Included |
3/4, 1, 1-1/4 |
| Spindle Size Under Nut (In.) |
3/4 (3-1/2), 1 (6), 1-1/4 (6-1/2) |
| Spindle Travel (In.) |
7 |
| Spindle Tilt (Deg.) |
45 Forward, 5 Back |
| Reversible |
Yes |
| Router Bit Collet Included |
1/4, 1/2 |
| Maximum Diameter Cutter Above Table (In.) |
12 |
| Maximum Diameter Cutter Below Table (In.) |
9 |
|
| Table Inserts (In.) |
2-1/5, 5-1/2, Oval (Tilting) |
|
| Table Size (In.) |
51-1/2 x 33-1/2 |
|
| Table Travel (In.) |
49-1/4 |
|
| Sliding Table Size (In.) |
11-1/4 x 51-1/4 |
| Fence Size (L x H) (In.) |
46 x 5 |
| Fence Travel (Major and Minor) (In.) |
5-3/8, 3-5/8 |
| Dust Port Outside Diameter (In.) |
5 (x2) |
| Dust Collection Minimum CFM Required (CFM) |
800 |
|
| Electrical Controls |
24 volt |
| Motor Power (HP) |
7-1/2 |
| Motor Phase |
3 |
| Motor Voltage (V.) |
230/460 |
| Prewired Voltage (V.) |
230 |
|
|
| Recommended Circuit Size (Amps.) |
30/15 |
