Have questions? Give us a call at 260-637-0054.
Osmo Polyx-Oil is a general-purpose Hardwax-Oil wood finish that uniquely combines the advantages of natural oils and waxes in one product. It is stain-resistant, water repellent, and abrasion-resistant and results in a surface that is pleasant to the touch. In comparison to conventional finishes, the use of plant ingredients creates a more even color and more harmonious appearance.
This finish is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister.
The advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.
Don't forget your brushes and pads!
Note: Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.
Coverage rate: 645 sq. ft.
Number of coats: 2 coats
Application temp.: 41°F - 95°F (5°C to 35°C)
Approx. drying time: 8-10 hours*
Full cure time: 2-3 weeks
*Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
First Coat: Apply one thin coat with an Osmo Floor Brush or Osmo Floor Roller. Our rollers have a 4.5mm nap.
Third Coat: Usually a third coat is not required, however highly absorbent or dry timbers may appear to require a third coat.
Please consult OSMO technical support at 1-844-OSMOCAN prior to carrying out a third coat
Tinting: Osmo Wood Wax Finish can also be used to lightly tint Polyx-Oil 3054 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx-Oil 3054 to 1 part Wood Wax Finish.
Cure Period: Osmo Hardwax-Oil(s) like all floor finishes have a cure period. We recommend allowing 2 weeks for the surface to fully cure and harden prior to damp-mopping or placing rugs/mats on the surface.
OakTree Supply is a family owned and operated woodworking machinery, tool and supply store with a focus on quality brands you won't find in the big-box stores. Whether you are a hobbyist, a long-time pro, or even a business in need of industrial machinery, we can help!
Learn more on our About Us page.
Visit Our Retail Store:
14110 Plank Street
Fort Wayne, IN 46818
Stay in the loop about sales, new products, events, helpful information & more!