OSMO Oil Stains - 0.125L
- Price
- $ 21.99
Have questions? Give us a call at 260-637-0054.
OSMO Oil Stains are designed for a professional color on wood flooring and furniture. Water-repellent and resistant to stains and scratches, they are excellent to use on wooden floors in high-traffic areas, such as kitchens, living/dining rooms, and stairs. They are also saliva-resistant and sweatproof, making them suitable for children's toys. Oil stains are extremely durable, so they protect wood as much as they provide a beautiful finish.
Applying a single coat of Oil Stain will create a transparent look showing the wood’s natural grain, whilst an optional second coat will produce an opaque color. See images for examples of one coat (left) vs two coats (right) of each color.
OSMO products offer a natural and environmentally-friendly alternative to wood finishing. Products are made of rapidly renewable, natural vegetable oils that penetrate the wood deeply, keeping it elastic and healthy while also preventing it from drying and becoming brittle. This allows the wood to breathe, giving it a natural protection and making it water-resistant.
OSMO Oil Stains are also available in 1L.
Be sure to check out OSMO Brushes and Applicators for flawless finishing. Also, don't forget sandpaper!
Helpful tip: A clear, final coat of OSMO Polyx-Oil is a must to protect pigmented finishes from wearing the color.
Note: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.
California shipping restriction: Due to regulations, this product cannot be shipped to the following counties: Los Angeles, Riverside, Orange, Pequimans, and San Bernardino.
Features
- Extremely durable and hardwearing
- Variable color tones: Transparent (1 coat) or Intensive (2 coats)
- Suitable for all woods including exotic
- Fast drying
- Resistant to common liquid spillages
- Saliva-resistant and sweatproof
- Microporous, breathable finish which does not crack, peel, or flake
Specs
Size: 0.125L (125ml)
Coverage rate: Approx. 32-64 sq. ft. (258-517 sq. ft. per liter)
Number of coats: 1-2
Application temperature: 41°F - 95°F (5°C - 35°C)
Approx. dry time: 12 hours (4 with hardener)
Directions
- Clean or lightly sand old microporous finishes, remove old varnish.
- Sand carefully, beginning with coarse sandpaper. Recommended final sanding work for flooring is between 120-150 grit, and furniture is 220-240 grit.
- Remove dust with a vacuum, brush, or lint-free cloth.
- Using a microfiber roller, a scraper, or a floor brush, apply very thinly along the grain. Massage into wood with a pad applicator.
- Allow finish to dry for approximately 12 hours (4 hours with hardener).
- If a stronger color intensity is desired, repeat steps 4-5.
Tip: With an unused microfiber roller, any brushstrokes can be removed within 30 minutes of application.