In stock as of 2/12/21. Get them before they're gone!
Please call for availability: 260-637-0054. Due to high demand and global manufacturer supply shortages, this item may be on backorder. You may still place an order to reserve your place in line. As we receive inventory, orders will be fulfilled in the order they are received.
The MFT/3 is the perfect height to make work more comfortable. V-groove channels make squaring the miter gauge easier, more accurate and provides a mechanism for attaching accessories. The MFT/3 has many features like perforated tops, side channels for attaching clamps, and folding legs to allow two working heights, as well as easy transport. On the jobsite or in the workshop, use the MFT/3 as a supplemental work surface for sanding, jointing, clamping, or just about anything else.
- Can easily be carried to a jobsite, due to its compact size and light weight.
- Accurate and repeatable cuts with the guide rail and plunge saw or routers.
- Clamp faster with uniform holes and Festool clamps.
- Use with legs folded out, at full height, or folded in and set on the floor.
Available for shipment in the United States only
[TABS]
Features
Guide Rail System
The integrated guide rail system allows you to cut with confidence. Adjustable to a maximum cutting depth of three inches, accurately cut materials over 27 inches in width - a feat which is impossible with the largest of miter saws. Combined with Festool TS Series saws, Trion jigsaws and OF Series routers, the guide rail is used to make precise, splinter-free cuts that are safer than with a conventional table or radial arm saw.
Angle Unit
The angle unit supplied with the MFT3 Multi-Function Table attaches using the V-Groove side rail enabling easy removal and quick, accurate reattachment. Using the angle units detents, make precise angle cuts at common angles. Changing the cut angle is much easier when compared to a miter saw where the entire saw head must be repositioned. The angle stop allows the guide rail and saw to remain stationary while repositioning the workpiece and fence.
Angle Stop
Precise, repeatable angle cuts. The angle stop, which is attached to the Multi-Function Table using the V-Groove side rail, prevents movement of the angle unit by stabilizing the end of the fence. It can be easily removed or repositioned using the locking knob.
Ergonomics
Not even the placement of the tensioning knobs for the legs of the MFT escaped consideration in the redesign of the MFT3 Multi-Function Table. The knobs are now placed further from the side of the MFT to provide ample room for rotating the knob without damaging your most valuable tools -- your hands.
More Features
Rubber Feet
Even the most minute of details have not been overlooked in the redesign of the new MFT3 Multi-Function Table. The new rubber foot caps protect the floor which is especially important while working on the job site. The new caps also make the MFT more resistant to lateral movement during use.
Combining Tables
Festool's system approach to tool design is exemplified in the use of the integrated T-Groove side rail to quickly and easily connect two or more Multi-Function Tables (MFTs) to one another. Simply insert the optional connectors (484 455) into the side rails to bridge the MFTs to one another multiplying your work surface. It's that simple!
Clamping
The perforated work surface and integrated side rails of the Multi-Function Table provide a wide variety of clamping configurations. Working with the edge of the workpiece or irregular shapes has never been easier thanks to Festool's clamps which are designed to integrate with the MFT. Work with confidence, knowing that your workpiece is well secured.
Work Surface
While the Multi-Function Table (MFT) makes a superb work surface for cutting, sanding and routing, you can also use the MFT for assembly. Built to be sturdy, the MFT can support loads up to 260 lbs. A ergonomically designed work height places your work materials at the perfect height.
Specs
Weight 61.73 lbs (28 kg)
Max. workpiece width 27" (700 mm)
Max. workpiece thickness 3-5/64" (78 mm)
Table height, legs folded away 7" (180 mm)
Table dimensions 45" (1 157 mm) x 30" (773 mm)
Table height, legs unfolded 35" (900 mm)
Load capacity 264.56 lbs (120 kg)
Includes
- Multifunction Table MFT/3
- 42" Guide Rail FS 1080
- Additional Clamp
- Adjustable Step
- CMS Router Table Miter Gauge
- Guide Rail Deflector
- Support Unit
- Swivel Unit
- Table with Perforated Top and Foldaway legs
[/TABS]
