Surfacing-thicknessing machine for the demanding craftsmen and carpentries, for a high-flexible production with an “elite” finishing.
[TABS]
Features
Perfect finishing
The planer unit stands on cast iron supports and the standard version has an 87 mm diameter cutter block with 3 knives. (The optional “Tersa” cutter block is available with 4 quick tightening knives and automatic adjustment). For an impeccable finish, the pressure of the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant workpiece feed, while the outfeed roller, in sandblasted steel, maintains the perfect post-processing finishing.
Planing fence
The fs 41e uses a dedicated planing fence extremely rigid and smooth, thanks to support with a central round bar.
“Xylent” spiralknife cutter block with 3 series of knives
The 3 spiralknives give an exceptional finish. Reduced noise during machining provides a more comfortable working environment. It also improves dust extraction due to the production of very small chips. Each cutter has 4 tips that can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.
Specs
fs 41e
Cutterhead working width mm / inches 410 / 16
With XYLENT Spiral Helical Cutterhead:
Cutterblock diameter / no° of standard knives - 87mm x 66 knives
Dimension of standard knives - 15mm x 15mm x 2.5mm
Max. stock removal - 5mm
Jointer table length - 79"
Planer table dimensions - 16.65" x 30.5"
Planer feed speeds - 6 or 12 m/min
Min. - max. planer working height - 0.12" to 9"
Single-phase motor - 4.8hp
Fence Tilt degrees 0 - 45
[/TABS]
