Laguna LED Light Double Arm, Alloy Head

$ 149

Have questions? Give us a call at 260-637-0054.

The Chameleon LED Machine Lamp with 90 CRI is optimized for the best possible lighting. With the Led benefits of long life, low power consumption, and low heat emission, this makes the Laguna LED line the best machine lamp available.

Compatible with the following machines:

  • 14/12 Bandsaw - Saw is pre-drilled with 2 mounting locations - No bracket required.
  • 14BX Bandsaw - Saw is pre-drilled with 2 mounting locations - No bracket required.
  • 18BX Bandsaw - Saw is pre-drilled with 2 mounting locations - No bracket required.
  • 18CX Bandsaw - Saw is pre-drilled with 2 mounting locations - No bracket required.
  • Revo 12/16 Lathe - Lathe is now supplied with bracket - Older models may or may not have bracket.
  • Revo 15/24 Lathe - Lathe is supplied with mounting bracket.
  • Revo 18/36 Lathes - Lathe is supplied with dual mounting brackets.
  • Revo 24/36 Lathe - Lathe is supplied with dual mounting brackets.
  • JX/12 ShearTec2 Jointer - Jointer is supplied with mounting bracket.

  • 80, 90, 95 CRI are color rendering indexes. This index is used to compare artificial light sources to that of natural light that we perceive through our eyes on a sunny clear day. The higher the CRI, the more real things will look when shined upon
  • Chameleon Color (Temperature) Control allows the user to tune the environment with the best lighting possible
  • Full Brightness Control works in unison with the Chameleon color control allowing the user to further tune the lighting environment
  • Casted Impact resistant heads are protecting us for the 2-year warranty we offer on these lights. The heads are water and dust resistant and can withstand a punch well enough for military standards
  • Multiple Joint Design. Solid joints are used to allow the user to move the light wherever it needs to be. These joints can easily be tightened and loosened as desired and are prepped with Loctite prior to shipping. The Spinelock light features a sturdy spine that locks into place wherever it is. It does not move
  • 50,000 hour service life (5.7 Years). This means you can turn the light on, and leave it on, for 5.7 years before the bulb dies. This is because LED technology is very efficient, will not get hot, and uses very little electricity to operate
  • 100-240V LED Driver, 110V plug included. Another crucial component to longevity of the light is the driver. Our drivers allow for a voltage input anywhere from 100V to 240V and are equipped standard with a 110V 5-15 plug. This means that if you need 208V or 220V you can simple cut the plug and rewire it to the receptacle
  • Low Heat & Energy Consumption. Based on recent electricity data, the 14W Chameleon lights will only cost $2.56 a year if used for 5 hours every day

Maximum Reach: 37″
Left or Right Range: 32″
Head Dimensions: 5″ x 5″
Base Tapping: 60mm x 60mm x 60mm x 60mm
Packaged Dimensions (W x L x H): 12″ x 23″ x 7″
Assembled Dimensions (W x L x H): 5″ x 22″ x 22″
Packaged Weight: 5 lbs.
Assembled Weight: 4 lbs.
Electrical: 100-240V/1PH/60Hz
Consumable Spec: Bulb – 14W LED
Lens: Diffused Glass
Head: Casted Alloy
Arm: Aluminum
Base: Casted Alloy


Customer Reviews

Based on 1 review
Dale House
Excellent, solidly built product

This is a very good lamp for mounting on the top or side of a bandsaw. I had to drill holes to mount the lamp on the top of my Grizzley 19" bandsaw, which is quite easy. (The bolt pattern is 2 3/8"/60mm square. Although designed for M4x0.7 bolts, #8-32 bolts for #8 wood screws work fine.) I find the positioning adjustments very adequate. I have not needed the color temperature adjustment yet, but the Kelvin range is good and setting the adjustment knob in the center position yields just about perfect 5800K light, which is sunlight. Very solid construction. Brightness is also adjustable. The brightest setting is fully sufficient for my needs.