Hand Saws
Price
Brand
9 items found in Hand Saws
Gyokucho 770-3500 Razor Dozuki Saw with Blade
Hand Tools
- $ 35.95
Use this dozuki saw for small joinery in most woods. Cuts a thin and straight kerf. Blade has seventeen teeth per inch.
Gyokucho 770-3600 Razor Ryoba Saw with Blade
Hand Tools
- $ 35.95
Perfect for cross cutting or ripping of smaller stock. Blade has seventeen teeth per inch on the cross cutting side and six teeth per inch on the rip side.
Two Cherries Dovetail Saw
Hand Tools
- $ 15.95
Steel backed dovetail saw, 15 teeth per inch, 250mm (~10″) length, offset wooden handle.The handle is cranked to the side and the blade itself is offset from the center so that you can make a flush cut where needed.
Veritas® Dovetail Saw 14 TPI
Hand Tools
- $ 75.95
14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...
Veritas® Double Edge Flush Trim Saw
Hand Tools
- $ 24.95
The Double Edge Flush Trim Saw from Veritas makes short work of trimming wooden plugs flush to the surface of your project. It features a 22 tpi Japanese tooth pattern which cuts on the pull stroke. This allows the blade to be thinner and more flexible than a push cut saw which means less wood ...
Veritas® Dovetail Saw 20 TPI
Hand Tools
- $ 75.95
14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...
Veritas® Small Crosscut Saw 16 TPI
Hand Tools
- $ 75.95
14-1/4" long overall; blade is 9-1/4" long and 0.020" thick with a cut depth of 1-9/16" Either 14 or 20 rip-cut teeth per inch, 0.003" of set per side, with 14° rake angle and included 60° angle; 14 tpi model is most efficient on stock thicker than 1/2", 20 tpi version is best for stock under 1/...
Veritas® Crosscut Carcass Saw 14 TPI
Hand Tools
- $ 78.95
The Crosscut Carcass saw from Veritas features a solid Bubinga handle an 11" long, high-carbon steel blade. The blade is 0.02" thick and has a cutting depth of about 2-3/8". The teeth have a 15° rake angle, included 60° angle and alternating 15° bevels with 0.003" of set per side. The over-mol...