Use this mixing pot to measure and mix West System or other epoxy. Pots can be reused - simply pop out any leftover, cured epoxy. Pots are calibrated to make measuring easy.
Dispense the proper proportions of epoxy resin and hardener into a clean plastic, metal or wax-free paper container. Don’t use glass or foam containers because of the potential danger from exothermic heat build-up.
Do not attempt to adjust the epoxy cure time by altering the mix ratio. An accurate ratio is essential for a proper cure and full development of physical properties.
Pump one full pump stroke of resin for each one full pump stroke of hardener.
Depress each pump head fully and allow the head to come completely back to the top before beginning the next stroke.
Partial strokes will give the wrong ratio. Before you use the first mixture on a project, verify the proper ratio according to the instructions that come with the pumps. Re-check the ratio anytime you experience problems with curing.
Dispensing without Mini Pumps (weight/volume measure):
