FlowCast is a casting epoxy resin that looks like liquid glass. When the two parts are combined, it hardens to a crystal clear, durable finish to a maximum thickness of 1.5". Use FlowCast epoxy by itself for a crystal clear finish or pigments can be added to create custom colors and effects.
FlowCast can be worked using the same tools you already have for woodworking such as a lathe, table saw, or belt sander, leaving you thousands of possibilities to create beautiful projects. Be sure to check out any accessories you need, like the V-Notched Spreader, mixing sticks and pots, and safety gloves!
Used to Create:
- River Tables
- Encapsulating Objects
- Wall Art
- Filling Larger Gaps & Voids
- Casting Projects using Silicone Molds
Helpful tip: For smaller projects, such as drink coasters, we recommend EcoPoxy FlowCast SPR.
Mix Ratio: 2:1 by volume
Working Temperature: 21-27ºC (70-80ºF)
Pot Time: 8 hours depending on ambient temperature
Workable/Cure Time: 72 hours depending on ambient temperature, humidity, and thickness
Recommended Thickness per Layer: 1/4" - 1.5" per Layer. Maximum recommended pour depth of 1.5". Not recommended for pours less than ½" depth
Viscosity (Thickness): Low Viscosity to Fill Tight Spaces and Excellent Air Release
Cure Appearance: Crystal Clear
Bio Content: 35%
Pigments Can Be Added: Yes
Clean Up: Denatured Alcohol