SCM Class SI 400EP Sliding Table Saw

Price
$ 45,295

Have questions? Give us a call at 260-637-0054.

  • Freight included in price*
  • In stock as of 3.18.24

The Class SI 400EP is a versatile programmable sliding table saw with a 16” blade capacity that can be used for breaking down large panels as well as cutting smaller components. The maximum stroke of this sliding table is 10.5’ (126”). It features a 3 axis programmer (main blade height, blade group tilt, scoring blade vertical and horizontal position, and rip fence). Both large and small shops can benefit from this versatile performer.

Guideways are ground to tolerance allowing for a precise and permanent fitting of the wagon assembly. The radius is ground into the steel guides which increases the contact area along the bearing surface. This eliminates pre-mature wearing of the bearing and guides. The steel guides are mechanically dovetailed (not glued) into place. The carriage will never require adjustment due to its structure with arch ground steel slideways (developed by SCM). All classical SCM sliders come with a 10 year warranty on table guideway tolerances.

The Class SI 400EP uses the “EASY 3 UP PLUS” three axes programmer. This controls the position of the rip fence, raising and lowering of the main blade and scoring blade, in addition to the main blade and scoring blade tilt angle.

The double trunnion assembly for the blade tilting is part of the blade group casting. This eliminates the possibility of misalignment which exists when these parts are bolted in the place as some manufacturers do. Others used a small pivot pin to hold up the saw group. Direct shaft drive coupled with rack and pinion gearing allows smooth, angle adjustment of the saw blade.

CompeX (SCM patent), the self-adjustment system, automatically mechanically moves the squaring rule, when it is angled, to maintain the distance between the stops and the cutting line. The scoring blade height and tilt is controlled through the Easy 3 upper control panel. Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. Thissystem eliminates the need for shims and the constant adjustment they require. It is fully adjustable in 0.1 mm increments.

The programmable rip fence on the Class SI 400EP uses a THK guide system for extra durability and superior accuracy. The recirculating ball screw has a large 22 mm diameter, and is similar to those used on SCM’s CNC equipment. There is no magnetic strip; instead, this interface uses an encoder and it quickly moves the fence into position at a rate of 82 feet per minute. The fence can be excluded under the work table if needed.

Features
  • Anodized aluminum alloy carriage sliding on radiused hardened steel guides
  • 3 Axis “READY” electronic programmer for powered rip fence, and blade group (raise, lower, and tilt), with memory capacity up to 99 programs
  • 2 Axis powered blade group (closed casting, dual blade guide rails) arbor tilt from 0 to 45°
  • 1 Axis powered rip fence movement
  • Electronic “LED” digital indicators for all automated axes on controller
  • Overhead control panel
  • Gantry mounted pivoting blade guard with integrated dust outlet
  • Parallelogram Swiveling Outrigger Support with an LCD display for miter angle cuts
  • Scoring unit
  • "EZ Dial" Adjustment for the split scoring blade
  • Motor control buttons integrated into the sliding carriage
  • Eccentric clamp for panel holddown
  • Table extension on outfeed side
  • Emergency push button located on the front machine side
  • Blade access door with quick locking and safety microswitch
  • Blade protection on riving knife (version with electrical protections) exhaust outlet 60mm
  • Overhead saw guard (USA/Canada version)
  • Automatic brake on main sawblade (USA/Canada version)
  • Padlockable main switch
  • Auxiliary low voltage circuit (110 voltage)
  • "CSA" rated electrical components, including cables (USA/Canada version)
  • Overload switch protection
  • Direct start main motor
  • Inch or metric operation
  • Multiple language capacities
Specs

Main Motor HP: 12hp
Scoring Motor HP: 1hp
Fixed Table Size: 49" x 27"
Sliding Table Width: 14.25"
Height of Worktable: 35.5"
Rip Capacity: 59"
Max. Length of Crosscut with Scoring: 126"
Main Blade Diameter / Arbor: 16" / 1"
Scoring Blade Diameter / Arbor: 5" / 3/4"
Arbor Speeds - Main / Scoring: 3000 / 4000 / 5000 / 8,500 RPM
Dust Outlets - Main / Overarm Guard: 5" / 4"
Depth of Cut - 0° / 45°: 5.5" / 3.8"
Overall Dimensions: 286" x 166" x 36"
Crated Dimensions - 2 Pieces (machine/table): 7.4' x 4.6' x 6.9' / 12.1' x 1.5' x 0.7'
Shipping Weight - 2 Pieces (machine/table): 2,340 lbs / 340 lbs
Net Weight: 2,300 lbs
Electrical Requirements: 31 amps @ 230v, 3 ph
Dust Extraction: 1100 CFM

Includes
  • 14" blade
  • Eccentric clamp
*Shipping

Please note: Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.

SKU: Class SI 400ep

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)