Renew is a ready-to-use product that refreshes, restores and protects surfaces treated with Oil Plus 2C. Renew should be used when the surface feels too dry or rough, or when the finish has worn down due to heavy use.
- Brings the surface back to a freshly oiled state
- Restores the depth and vibrancy of the color
- Masks scratches in the surface as long as the surface is not damaged
- No overlaps or starting marks
- Minimal use/High coverage: ~100 sq. ft.
- Convenient: Surface use after 4 - 6 hours
- A short ‘dry’ maintenance period: after 6 days, the surface can be cleaned with water and soap
If color restoration is required, perform a renovation using Oil Plus 2C in the original color.
[TABS]
Specs
Spread Rate: ~100 sq. ft.
Cure Time: 6 days
VOC Content: 0%
Dilutable: No
Shelf Life: 12 months
Warning: Rags saturated in oil can spontaneously combust and need to be disposed of in accordance with local regulations.
Directions
- Eliminate dirt and dust from the floor.
- Apply Rubio® Monocoat Renew on to the surface to be treated. Use a minimal amount of the product to prevent the floor from becoming sticky.
- Allow the product to react for a couple of minutes.
- Wipe dry with a cloth, paper towel, or buffer with white pad.
- Perform a final wipe using an absorbing cloth, until the surface feels completely dry.
- Continue working in zones that can be fully wiped dry within 10 to 15 minutes.
- The surface can be walked on after 4 to 6 hours.
- Complete curing takes place after 6 days.
- Cleaning can begin after 6 days. Clean using Rubio® Monocoat Surface Care Spray or a soft cloth that is lightly damp with water.
[/TABS]
