These cleverly-designed bits produce both the rail and stile ogee shapes for your doors with a single bit. Use either the 99-060 or 99-061 bits to rout cope and stick profile cuts on the rails and stiles. Then use the 99-062 to rout the panel slot and the back of the tongue on the coped piece. The result is a complete rail and stile match for any cabinet door project. Use with hand-held or table-mounted routers to cut hardwood or softwood door parts.
Ideal for matching, reversible profiles for cope & stick joints.
- One profile bit routs the rail and stile shapes on both stile and rail
- Add the 99-062 to rout the panel slot and back of the rail cut
- Use with hand-held or table-mounted routers to cut hardwood or softwood door parts
- Freud Perma-SHIELD Coating
Item Number: 99-060
- Carbide height: 7/16"
- Overall dia.: 1-1/2"
- Radius: 7/32"
- Minor height: 1/16"
- Overall length: 2-1/4"
- Number of cutters: 2
- Max RPM: 16,000
- Shank dia.: 1/2"
- Small dia.: 1"
Item Number: 99-061
- Carbide height: 3/8"
- Overall dia.: 1-1/2"
- Radius: 5/16"
- Minor height: 1/8"
- Overall length: 2-1/4"
- Number of cutters: 2
- Max RPM: 16,000
- Shank dia.: 1/2"
Item Number: 99-062
- Carbide height: 1/4"
- Overall dia.: 1-1/2"
- Overall length: 2-1/8"
- Number of cutters: 2
- Max RPM: 16,000
- Shank dia.: 1/2"
