- Freight included in price*
- Next available May 2023
The Class S 630 T is a heavy duty, 24” wide cutterhead planer designed to meet the needs of the most demanding environments. It features a monoblock base, work table with support rollers, and a Tersa straight-knife cutterhead.
Monoblock technology is used in the design and fabrication of this base. The solid, welded base undergoes a treatment called normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.
All SCM planers use four jack screws with acme style threads and dust covers for maximum table support. In addition to providing a stable lifting system which eliminates sniping, the acme threads greatly increase the longevity of what is normally the most common wear item on planers. Through a patented design, there is a special bushing between the drive chain, and sprocket which doesn’t allow any pressure from the chain to reach the jack screw, thus pushing the machine’s longevity to the extreme. It is equipped with a powered raise and lower system with an LED readout for accurate positioning.
Used when planing raw, uneven lumber, the work table support rollers allow irregular material to be planed that would not feed on a standard table. When the material has been planned flat on one side, the rollers can be lowered to allow a clean pass on the other side.
The SCM feed system includes a powered sectional steel infeed roller and powered rubber outfeed rollers. This combination helps ensure feeding of parts with variations up to 6mm in thickness. Anti-kickback fingers and a sectional chip breaker are also part of the feed section and provide both safety and a quality finish.
The Class S 630 T includes the quick change knife “Tersa” cutterhead. This cutterhead eliminates the necessity of gauging the knives each time to ensure proper setting position. The Tersa knives automatically reference into position when the head is turned on. Removal of the knives is as simple as tapping down the wedge blocks and sliding out the knives. Since the knives are two-sided, they can be flipped over, reinserted, and used again.
[TABS]
Features
- Tersa 4 knife, insert cutterhead
- Ergonomically positioned controller for electronic readout of the planer thickness
- Electric powered movement feed table raise and lower (2 speed)
- Pneumatic load adjustment on the rollers for the best finish and effectiveness of the feeding of any material in any working condition
- Steel, sectioned infeed
- Two rubber outfeed rollers
- Variable feed system
- Powered bearing-assisted feed rollers
- Magnetic starter with overload protection
- Table lifting by four high precision jack screws
- Adjustable bed rollers in feed table
- Course and fine thickness adjustment
- Tool set
- Dust hood
Specs
Motor HP: 12hp
Working Width: 24.8" (630 mm)
Working Height: 9/64" - 11.8" (3.5 - 300 mm)
Max. Depth of Cut: 5/16" (8 mm)
Min. Length of Stock: 10-1/4" (260 mm)
Cutter Head Diameter: 4-3/4" (120 mm)
RPM: 4,500
No. of Knives: 4
Knife Dimensions: 25-1/4" x 1-1/4" x 1/8"
Table Size: 24.75" x 39.4" (640 mm - 1,000 mm)
Feed Speeds (variable): 4 - 20 m/min (13 - 65 FPM)
Infeed Roller: Steel Sectional, Power Driven
Outfeed Roller (X 2): Rubber, Power Driven
Dust Hood Diameter: 6" (150 mm)
Noise Level (dB): 70
Overall Dimensions (L x W x H): 51" x 40" x 45"
Shipping Weight: 2,710 lbs
Net Weight: 2,550 lbs
Electrical Requirements: 45 amps @ 230v
Dust Extraction: 980 CFM
*Shipping
Please note: Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.
[/TABS]
