Build Absolute Square Jigs with Hassle-Free Bars. The MicroJig ZEROPLAY Miter Bar is a “One-Touch Calibration” miter bar that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot for a perfect fit and smooth glide, even fits tricky Shopsmith™ or General’s miter slots.
Because the ZEROPLAY Miter Bar is a full profile bar that fits the exact width of the miter slot, you have no side-to-side play within the miter slot. The ZEROPLAY Miter Bar System is for those who demand absolute accuracy and have zero tolerance for mistakes. Build better jigs in less time!
Fits any standard 3/4” x 3/8” T-Track Miter Slots.
[TABS]
Features
Create perfectly square cross cut jigs without any trial and error set-screw adjustment along the miter bar - use the One-Touch Calibration.
Top Down Installation allows you to easily square jig to the blade adjustment while securing through the top of the sled.
Build small cut-off jig easy to carry and store or build large jig with ZEROPLAY Miter Bars in tandem with custom spacing.
Replaceworn and warped wood runners and aluminum bars that can be a hassle to calibrate.
Retro-Fityour existing cross-cut jigs for improved precision.
Accurately check alignment of saw blade to the miter slot with a dial-indicator (not included).
Build your own unique jig or jigs with included plan.
Specs
Weight: 0.38 oz. Size: 9.5 x 0.3125 x 0.78" Material: Durable Plastic Requirements: Table Saw Color: Black
Much easier to set than trying to machine a piece of wood to within a thousandths of an inch. Need longer miter bars available for larger jigs. The price is a bit expensive but the miters can be reused for other jigs or readjusted for years of use.
S
Sheldon B.
Cross cut sled
I used the zeroplay guide bars to make a cross cut sled for my table saw . They worked great and made it very easy to aline the sled for smooth travel on the saw !
