The MicroJig 1/8" Full Kerf Splitters easily install on your table saw’s zero clearance insert, replacing the riving knife. It keeps your workpiece tight to the fence to prevent burning, and keep the kerf from pinching the blade, virtually eliminating kickback.
Designed for 1/8" kerf saw blades.
The included precision drill guide aligns your drill with the dead center of your kerf by registering off of the kerf itself.
For 90 degree thru-cuts only.
Weight: 0.25 lbs Offsets: Reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009” Kerf Range (Table Saw): 0.118 - 0.145” (kerf), 90º cut angle Requirements: Table Saw, Zero-clearance insert with at least 2" behind blade at highest point Color: Green