{"product_id":"general-finishes-water-based-high-performance-topcoats-5-gallon","title":"General Finishes Water-Based High Performance Topcoats - 5 Gallon","description":"\u003cp\u003eHigh Performance is an all-purpose water-based topcoat finish for residential interior woodworking projects. With excellent all-around durability, it is designed for the DIY user or contractor who wants a professional-grade finish that is designed to be brushed, roller, or sprayed. High Performance is the best choice for high use areas such as table tops and kitchen cabinets. \u003c\/p\u003e\n\u003cp\u003eRecommended for interior cabinets, trim, doors, and furniture. Use over raw wood, stain, and non-white painted surfaces. Suitable for floors. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do not use High Performance or any other clear coat, over white or light paints such as Milk Paint or White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of General Finishes' White Paints, brush-able or spray versions, do not require a topcoat.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title=\"General Finishes Water-Based High Performance Topcoats - Gallon product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoat-gallon\" target=\"_blank\"\u003egallons\u003c\/a\u003e, \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water Based High Performance Topcoats - Pint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-pint\" target=\"_blank\"\u003epints\u003c\/a\u003e and \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water Based High Performance Topcoats - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/gf-high-performance\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e \u003cspan\u003eand \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTint-able:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500-600 sq. ft. per gallon\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320 grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNewly stained surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDo not sand.\u003c\/li\u003e\n\u003cli\u003eApply directly to the stained surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of High Performance. More coats will not improve durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, staining pad or roller such as Whizz or AllPro Velour brand. Avoid pressure and excessive back brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks dry - they WILL tighten down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our general guide for spray tip sizes. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space. Read here for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames and drawers on cabinets:\u003c\/strong\u003e High Performance can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of High Performance Topcoat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Sheens:\u003c\/strong\u003e You mix can High Performance Topcoat sheens to adjust your sheen. For example, you can mix High Performance Flat and High Performance Gloss to obtain a different sheen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fSAm4rsj6N8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":48565893955801,"sku":"B150-5 Gallon Pail P","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":48565893890265,"sku":"B152-5 Gallon Pail P","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":48565893923033,"sku":"B153-5 Gallon Pail P","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":48565893988569,"sku":"B151-5 Gallon Pail P","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Dead Flat","offer_id":48565994094809,"sku":"B745-5 Gallon Pail P","price":715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/high_performance_5GAL_-_flat.jpg?v=1777044250","url":"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-5-gallon","provider":"OakTree Supply","version":"1.0","type":"link"}