{"product_id":"general-finishes-water-based-flat-out-flat-topcoat-gallon","title":"General Finishes Water-Based Flat Out Flat Topcoat - Gallon","description":"\u003cp\u003eFlat Out Flat is a \"dead-flat\" finish for anyone wanting a very low-sheen appearance on their project. It mimics the waxed look of chalk-style paint. Because of its natural properties, it is not recommended for medium- or high-use pieces like furniture or cabinets.\u003c\/p\u003e\n\u003cp\u003eWant to improve the performance of your finish and still obtain a matte sheen? Use a semi-gloss sheen for the first 2 coats and a flat for the third for optimum performance. Alternatively, use \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_water-based-top-coats\" title=\"All General Finishes Water-Based Topcoats\" rel=\"noopener\" target=\"_blank\"\u003eHigh Performance Water-Based Topcoat\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_oil-based-top-coats\" title=\"All General Finishes Oil-Based Topcoats\" rel=\"noopener\" target=\"_blank\"\u003eArm-R-Seal Oil Based Topcoat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-quart\" target=\"_blank\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Quart product page\" rel=\"noopener\"\u003equarts\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-pint\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Very Flat (1-5)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Self-crosslinking Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500-600 sq. ft. per gallon\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Low\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. No more than three coats is recommended. Additional coats will not improve durability. Flat Out Flat contains more matting agents to decrease the sheen, and the finish can get cloudy when excessive topcoats are applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure and back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of Flat Out Flat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, oil-free tack cloth, or clean water-dampened rag before re-coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":48565746434265,"sku":"B489-L Gallon","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/flatoutflatgallon.jpg?v=1777037119","url":"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-gallon","provider":"OakTree Supply","version":"1.0","type":"link"}