Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixing and pouring the resin. It offers superior polishability than other clear resins and able to achieve maximum shine in your finished parts.
Alumilite Clear has a 7 minute work time and a 90 minute demold time and is fully cured in 5 to 7 days. It is specially made to produce crystal clear castings for wood turning, prototyping, auto restoration and other applications where clarity is paramount.
Alumilite Clear must be mixed 1:1 by weight. Off ratio mixing may produce hazy or frosted parts.
Convenient 1:1 mix ratio (by weight)
Thin viscosity for easy mixing
Easily dyed or pigmented
Can be turned, drilled, sanded, and polished to high gloss
Off-mixing may produce hazy or frosted parts
Minimal bubbles can be achieved by slowly mixing and pouring
Pressure casting is recommended for bubble-free results
Note: The clarity of resin will shift from batch to batch based on the clarity of incoming raw materials. In most cases, this will not affect product unless used over white backgrounds.
To use: Measure out equal parts of side A and side B by weight mixing thoroughly to combine both sides. Add color with dyes and powders to create unique, custom pieces. Pour Alumilite clear into your mold within the work time to ensure a good casting. We recommend using a pressure pot to ensure bubble free castings keeping your project under 40 psi of pressure during the cure time.