Tried & True Danish Oil - Quart

Price
$ 29.99

Have questions? Give us a call at 260-637-0054.

A superior penetrating linseed oil finish that is polymerized for fast and easy application on interior woodwork and furniture. It is also ideal for wood paneling, cabinets, salad bowls, wood utensils, butcher blocks and surfaces that come in contact with food. Danish Oil Finish is commonly used by woodworking professionals for application to bare wood or overtop an already-stained piece. Danish Oil will darken the wood slightly and can be combined with oil-based pigments to create wood stains.

  • 100% food contact safe
  • 100% skin contact safe
  • Zero VOC's
  • Solvent-free
  • No heavy metal driers

Coverage rate: Up to 250 square feet per quart

Care & Maintenance: Use a soft shammy cloth to polish any dull areas. Clean using Murphy’s Oil Soap or other wood safe cleaners.

To repair any scratches, nicks, or water marks: Use 0000 grade steel wool to buff out as much of the affected area as possible. Then, use a lint-free cloth to apply a small amount of the Varnish Oil to the damage wood. Follow the normal recommended application directions. For watermarks — if damage is severe, sand water mark away using fine grit sand paper until it is smooth and even with the surrounding surface. Reapply the Varnish Oil to the water mark by following the normal recommended application directions. Remember to always protect the wood surface using coasters or anti-scalding devices.

Don't forget your cloths/pads!

Features
  • Tried & True Danish Oil is an all-purpose, 100% natural and food safe traditional oil finish. Pure high-grade, fast drying linseed oil without any drying aids (aka heavy metal salts).
  • Proprietary heat treating process turns raw flax oil into Danish Oil. 100% renewable, safe for skin & food contact. No need for PPE or ventilation while using. Petrochemical Free, Heavy Metal Free.
  • Gains a patina as it ages. Truest Danish Oil formula, as they would have been made 125 years ago! Great for users new to natural oil finishing or those that want a classic simple hand rubbed finish. Use on raw iron, earthen floors or any other project that traditionally calls for pure linseed oil.
  • Perfect finish for live edges. Excellent primer for other Tried & True products. This product can be applied over other natural oil finishes and penetrating stains. Can also be a base coat grain enhancer prior to pouring epoxy.
  • Tried & True products have infinite reparability and will last longer than a lifetime when properly maintained. No yellow plastic flakes as they age! These are 100% solids (no fillers, no solvents) so a little bit goes a very long way.
Directions
  • Give it a good stir before you apply.
  • Apply a very thin coat across entire piece with a lint-free cloth at room temperature. A dry to wet color change in the wood should occur. A little bit of finish will go a long way! Do not use a brush.
  • Allow Varnish Oil to penetrate the wood for a minimum of 60 minutes.
  • Rub in briskly with a lint-free cloth until the surface is completely dry. Do this before you let the piece cure! Drying/curing issues will occur if this step is ignored!
  • Allow the piece to cure for a minimum of 24 hours.
  • Burnish with a soft cloth or 0000 steel wool BEFORE EVERY COAT (even the first and last). The more you rub the surface, the better the sheen will look.
  • Additional coats will deepen the sheen and increase protection.
Video

SKU: TTDO-QT

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Roy Kristiansen
First time buyer

I have to say I'm seriously impressed with their care and attention when it came to shipping. I ordered the Danish oil, and a Dye stain. Not only were they packaged very well to protect the containers from damage during shipping, but they also wrapped the cans in several layers of plastic just in case of seepage. Wow! I'm always leery about purchasing "liquids" by mail for they normally show up in horrible shape, but not with Oak Tree, they did a great job.
The Danish oil: First time I used it this product, I like it a lot - Used it on a Moxon vise I built, came out great.
Thanks Oak Tree!