SCM Minimax SI 315ES Sliding Table Saw

Price
$ 13,195

Have questions? Give us a call at 260-637-0054.

  • Freight included in price*
  • Next available April 2024

The Minimax SI 315ES has proven itself in American cabinet shops for many years. This machine boasts a full 10.5’ stroke, single-phase motor and features normally found on much more expensive machines, for a fraction of the cost. See for yourself why the Minimax SI 315ES stands in a class of its own.

The Minimax SI 315ES has a massive cast iron blade group. This large design lends extra stability to the main blade and scoring blade. The cast iron blade group tilts on two trunnions to lessen degradation over time, and the main blade and scoring blade raise independently of each other.

The thick cast-iron knuckle attached to the extruded aluminum rip fence rides on a large steel round bar. It is locked in place with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design.

The Minimax SI 315ES comes standard with scoring. This allows you to not only accurately cut panels, but you can cleanly cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you want to apply some type of edge banding. If you are cutting solid wood, simply drop it below the table surface independently of the main blade. A 12” main blade capacity is featured without having to remove the scoring blade. The scoring is belt-driven from the main motor.

This machine comes with a separate miter gauge with two flip-stops. This way, for miter cuts, the operator can keep the main crosscut fence at 90° and use the separate miter gauge to do the angled cuts, saving time when mitering small panels. It also features an additional table on the slider to assist in supporting larger panels.

Also featured is an an extra wide sliding table to assist in supporting larger panels, as well as the sliding table lock which allows the slider to be locked when pulled away from the blade, making panels much easier to load.

Features
  • Double-hung cast iron trunnion
  • 4.8Hp single-phase motor
  • Aluminum table and rail with hardened steel guideways
  • Two aluminum flip-stops on crosscut fence
  • European rip fence with cam-lock, micro-adjustable
  • Telescoping crosscut fence
  • Automatic self-braking motor
  • Eccentric panel clamp
  • Angular cutting device
  • 2-Position sliding table lock
  • Dial indicator for saw blade tilt angle
  • Metric and standard rule on crosscut fence
  • Table extension on saw out-feed
  • External scoring adjustments
  • 3/4” Dado capacity
  • Telescoping support arm for crosscut support table
  • Tool set & operator’s manual
  • “CSA”-rated electrical components
Specs

Squaring Stroke: 10.5' (3,200 mm)
Worktable dimensions: 37" x 22" (940 x 560 mm)

Table Height: 34” (860 mm)
Max. Cutting Width w/Rip Fence: 50” (1,270 mm)
Main Blade Max. Diameter: 12.4" (315 mm)
Main Blade Arbor Size: 1" (25 mm)
Scoring Blade Diameter: 120 mm
Scoring Blade Arbor Size: 20 mm
Main Blade Speed: 4,000 RPM
Scoring Blade Speed: 8,000 RPM
Depth of cut at 90°: 3.97" (101 mm)
Depth of cut at 45°: 2.8" (71 mm)

Motor: Single-phase, 230v
Horsepower: 4.8 Hp
Main Dust Extraction Port Diameter: 4-3/4” (120 mm)
Saw Guard Dust Extraction Port Diameter: 2.5" (60 mm)
Minimum Suggested Extraction Volume: 1,000 CFM

Video

*Shipping

Please note: Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.

SKU: SI 315es

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)