Rubio Monocoat Oil Plus Sample Bottles - 20ml (2C A only)

Price
$ 5.99

Have questions? Give us a call at 260-637-0054.

Color:

Oil Plus Part A - 20 ML's are perfect for sampling Oil Plus 2C wood finish colors. For durability testing or final application, we recommend using in conjunction with Rubio Monocoat Part B Accelerator (30ml and 100ml available).

  • Sample size.
  • 0% VOC, does not contain any water or solvents.
  • It’s a natural wood finish because the oil is made of linseed.
  • No overlaps or starting marks.
  • Minimal use/High coverage: 300 - 500 ft²/L.
  • Can be applied to almost all wood types.

Pure or Natural? Pure is non-pigmented. Natural is pigmented with yellow/white tones.

20 ml sample bottles cover about 6-10 square feet.

Also available in 100ml bottles.

Note: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.

Specs

Spread Rate: 6-10 sq. ft.
Cure Time: Approx. 21 days
VOC Content: 0%
Dilutable: No
Shelf Life: 36 months
Warning: Rags saturated in oil can spontaneously combust and need to be disposed of in accordance with local regulations.

Directions

Furniture, stairs, and countertops :

  1. Sand the surface scratch-free, up to 120 or 150 grit.
  2. Vacuum thoroughly, eliminate remains of dust with Rubio Monocoat Cleaner and wait until the surface is completely dry (check the technical datasheet of Rubio Monocoat Cleaner before use).
  3. Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
  4. Spread out a small quantity of Rubio Monocoat Oil Plus 2C using the Rubio Monocoat Applicator Set. *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula in zones which can be finished within 15 minutes (including step 5). *For ceilings and walls, apply Rubio Monocoat Oil Plus 2C to the surface using a brush and spread using the Rubio Monocoat Applicator Set.
  5. Allow to react for 3-5 minutes. Wipe away all excess oil with a clean terry cloth. Within 10-15 minutes from initial application, perform a final pass using a clean terry cloth, ensuring all excess is thoroughly removed. The surface should be dry to touch upon completion.

Floors:

  1. Sand the surface scratch-free according to NWFA guidelines, up to 120 grit.
  2. Vacuum thoroughly then clean remaining dust using Rubio Monocoat Cleaner and wait until the surface is completely dry (check the technical datasheet of Rubio Monocoat Cleaner before use).
  3. Stir the A component until a homogenous mixture is obtained. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.
  4. Apply the oil to the perimeter of the room. Remove excess oil using a clean terry cloth within 10-15 minutes.
  5. Working in 50-100 ft² (5-10 m²) sections (or areas you can complete within 10-15 minutes), wipe the oil onto the wood and use a white or red buffer pad to equally spread the oil. Continue spreading the oil until the buffer pad no longer forms oil/ color rings. Complete steps 6 & 7 before starting a new section. *Spatula method: evenly spread Rubio Monocoat Oil Plus 2C with a stainless spatula.
  6. Allowing a reaction time of at least 3-5 minutes, use a clean white buffer pad to remove all excess oil off the 50-100 ft.² (510 m²) section.
  7. Thoroughly remove all excess oil within 10-15 minutes of initial application by placing a clean terry cloth under a clean white buffer pad. If needed, remove all excess oil from v-grooves/bevels and holes by hand.
  8. Continue working in zones you can complete within 10-15 minutes. The surface should be dry to touch upon completion.

SKU: AABRONZE/20ML

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jake Gee
Good Stuff!

I’ve picked up several different color samples to test out on various projects and wood species. Everything from cotton white to black and everywhere in between. A little bit goes a very long way. So far “Natural” and “Pure” have worked best for what I’ve been building. These also blend well with each other to create a wide range of options. Easy to apply, goes on in one coat, leaves no lap lines, and seems durable. Very good price here at Oak Tree!