{"title":"All Routers \u0026 Shapers","description":"","products":[{"product_id":"festool-router-of-1400","title":"Festool Router OF 1400 EQ-F-Plus","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-3\/4\" plunge depth capacity\u003c\/li\u003e\n\u003cli\u003eMicro-adjustable depth control to 1\/256\" (1\/10 mm) with ball detents for absolute precision\u003c\/li\u003e\n\u003cli\u003eMMC electronics provide constant speed under load for improved cut quality, step-less variable speed, and overload protection\u003c\/li\u003e\n\u003cli\u003eTemplate guide bushings are self-centering and can be inserted without tools\u003c\/li\u003e\n\u003cli\u003eCenter line on each side of the base acts as a visual reference point to align the the bit with the cut line\u003c\/li\u003e\n\u003cli\u003eIncludes three collet sizes (1\/2\", 1\/4\", and 5\/16\") and a chip catcher\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFestool's most versatile router. The OF 1400 provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1\/2\", 1\/4\", or 8mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every tradesperson should own. With a category-leading 2-3\/4\" plunge depth, precise to 1\/256\" (1\/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips. The OF 1400 EQ Router provides a smooth 2-3\/4\" plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock.\u003c\/p\u003e\n\u003cp\u003eMicro-adjustable depth control to 1\/256\" (1\/10 mm) with ball detents which allows you to dial in your routing with tremendous precision. MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBrowse our large selection of \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" target=\"_blank\"\u003erouter bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e With 1400 watts and MMC electronic controls, the OF 1400 is a mid-sized router with enough power to tackle even your largest projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRatcheting Spindle:\u003c\/strong\u003e One wrench bit changes with ratcheting action for faster and easier bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Column Clamping:\u003c\/strong\u003e One knob locks the plunge depth securely, for less motor to plate deflection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Extraction:\u003c\/strong\u003e Integrated dust extraction port extracts dust from the point of generation, increasing visibility and saving valuable clean-up time. The port is angled so that the hose stays in line with the power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Depth Adjustment:\u003c\/strong\u003e Micro-adjustability to 1\/256\" (1\/10 mm) with detents for each 1\/10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiveling Chip Deflector:\u003c\/strong\u003e Included chip deflector can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Less Inserts:\u003c\/strong\u003e Template guide bushings are self-centering and can be inserted tool-free. The swiveling chip deflector can also be attached and removed without tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-3\/4\" Plunge Depth:\u003c\/strong\u003e Enhanced depth is especially useful when routing on top of a template\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration:\u003c\/strong\u003e Designed for use with the FS guide rail system for guided cutting, VS 600 Dovetail jig for joinery applications, LR32 hole drilling system, MFS multirouting templates, and a wide range of other accessory options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Stop Turret:\u003c\/strong\u003e Three adjustable position depth stop turret for repeatable and consistent step cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad Center Line Marks:\u003c\/strong\u003e As with all Festool routers, the OF 1400 EQ has a center line indention on each side of the base. This visual reference point allows you to align the center of the bit with the cut line. No more guessing where the center of the bit falls on your workpiece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMC Electronics:\u003c\/strong\u003e Electronic controls provide constant speed under load for improved cut quality, step-less variable speed for different applications, and overload protection for longer life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRouting stroke:\u003c\/strong\u003e 2-3\/4\" (70mm)\u003cbr\u003e\u003cstrong\u003eMax. cutter diameter:\u003c\/strong\u003e 2-1\/2\" (63mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.92 lbs. (4.5 kg)\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\u003cstrong\u003eCollet dia.:\u003c\/strong\u003e 1\/4\" - 1\/2\" (6 - 12.7mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 1 400 watt\u003cbr\u003e\u003cstrong\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\"\/1-7\/16\" (27\/36mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eChip Catcher\u003c\/li\u003e\n\u003cli\u003e1\/2\" Clamping Collet (12.7mm)\u003c\/li\u003e\n\u003cli\u003e1\/4\" Clamping Collet (6.35mm)\u003c\/li\u003e\n\u003cli\u003e5\/16\" Clamping Collet (8mm)\u003c\/li\u003e\n\u003cli\u003eOpen-Ended Spanner, WAF 24\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/CMY1Bk3-V_g\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114071941,"sku":"576213","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/574692-6.jpg?v=1754021807"},{"product_id":"festool-router-of-2200-eb-f-plus","title":"Festool Router OF 2200 EB-F-Plus","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3-5\/32\" (80mm) of plunge depth travel that can be fine tuned in increments of 1\/10mm\u003c\/li\u003e\n\u003cli\u003eThree-bearing spindle minimizes deflection and bit wobble for smoother operation\u003c\/li\u003e\n\u003cli\u003eDust extraction column on back of router extends to the top and keeps both the power cord and dust hose out of the way\u003c\/li\u003e\n\u003cli\u003eRetractable, spring-loaded 360° dust shroud maximizes dust extraction while providing high visibility of the workpiece\u003c\/li\u003e\n\u003cli\u003eVariable speed from 10,000 to 22,000 RPM with 2200 watts of power\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/2\" collet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OF 2200 is Festool's most powerful router. It can easily plunge into 8\/4 hard maple and make a 1\/2\" groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.\u003c\/p\u003e\n\u003cp\u003eDust extraction is incredibly efficient with the OF 2200. The Dust Extraction Column is placed on the back of the router and extends to the top, and includes a swivel nozzle - a design which keeps the power cord (also top mounted) and dust extraction hose out of your way. Coupled with the \u003ca title=\"Festool Boom Arm CT48 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-ct48-boom-arm-set\" target=\"_blank\"\u003eFestool Boom Arm\u003c\/a\u003e, work smarter and take full advantage of operation without being impeded by cords and hoses (Festool recommends using a 36mm hose).\u003c\/p\u003e\n\u003cp\u003eOperating the OF 2200 could never be easier. Controls are clearly labeled with icons indicating purpose and adjustment direction. Work smarter without having to locate the manual to make less common adjustments. Use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application.\u003c\/p\u003e\n\u003cp\u003eWith 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1\/256\" (1\/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5\/64\" (2mm) finishing pass setting.\u003c\/p\u003e\n\u003cp\u003eUse the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi-Material Control (MMC) electronics to ensure constant speed under load. That means that the speed of the bit is constant as you plunge and move through the workpiece\u003c\/p\u003e\n\u003cp\u003eIncludes 1\/2\" collet only. \u003ca title=\"Festool 8 mm Collet with Nut product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/collet-8mm-of1400-2000-2200\" target=\"_blank\"\u003e8 mm\u003c\/a\u003e and \u003ca title='Festool 1\/4\" Collet With Nut product page' href=\"https:\/\/www.oaktreesupply.com\/products\/festool-1-4-collet-with-nut-1\" target=\"_blank\"\u003e1\/4\" collets\u003c\/a\u003e available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is the imperial version of this tool. It is identical to the previous version with the exception of the units on the depth scale. OF Routers produced after 2021 are NOT compatible with the Router Table CMS and all variations.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Extraction Column: \u003c\/strong\u003eThe Dust Extraction Column keeps the power cord (also top mounted) and dust extraction hose out of your way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntuitive Controls: \u003c\/strong\u003eControls are clearly labeled with icons indicating purpose and adjustment direction - use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Spindle Brake: \u003c\/strong\u003eThe Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTremendous Plunge Depth Capacity: \u003c\/strong\u003e80 mm of travel and micro-adjustment knob to fine tune plunge depth in increments of 1\/256\" (1\/10mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Bearing Design: \u003c\/strong\u003eWith bearings at the top, middle and bottom, the spindle is less likely to wobble - this is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control: \u003c\/strong\u003eUse the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Depth Stop Rod: \u003c\/strong\u003eThe Locking Depth Stop Rod allows you to save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Tool Ratcheting Collet: \u003c\/strong\u003eBit changes have never been easier - the ingenious retractable 360° dust shroud and wide plunge column spacing enables open access to the collet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetractable, Spring-Loaded 360º Dust Shroud: \u003c\/strong\u003eThe shroud maximizes dust extraction while providing high visibility of the workpiece, and retracts back into the locked position after the router is fully plunged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. bit diameter:\u003c\/strong\u003e 3-1\/2\" (89mm)\u003cbr\u003e\u003cstrong\u003eRouting stroke:\u003c\/strong\u003e 3-5\/32\" (80mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.20 lbs (7.8 kg)\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 3\/4\" (20mm)\u003cbr\u003e\u003cstrong\u003eCollet dia.:\u003c\/strong\u003e 1\/4\" - 1\/2\" (6 - 12.7mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 2 ,00 watt\u003cbr\u003e\u003cstrong\u003eDust extraction connection diameter:\u003c\/strong\u003e 1-1\/16\" or 1-7\/16\" (27mm or 36mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRouter\u003c\/li\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003eChip Catcher\u003c\/li\u003e\n\u003cli\u003eDust extraction hood\u003c\/li\u003e\n\u003cli\u003eOpen ended spanner, WAF 24\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mCEPiss8U2Q\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":7363030981,"sku":"576223","price":1219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576223-1.jpg?v=1754021790"},{"product_id":"minimax-tw-55es-tilting-spindle-shaper","title":"SCM Minimax TW 55es Tilting Spindle Shaper - 4.8HP, 1PH, 230V","description":"\u003cp\u003eCabinet and custom millwork shops, furniture makers, and door and window manufacturers all utilize shapers to cut, shape, and profile wood edges. The Minimax TW 55es can handle any shaping, routing, or tenoning application you desire. This 4-speed heavy duty machine features a tilting spindle, sliding table on hardened steel guideways, and adjustable fence with micrometric adjustment.\u003c\/p\u003e\n\u003cp\u003eThe Minimax TW 55es is the culmination of years of experience in manufacturing quality solid wood products. The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable. A wide sliding table rides on hardened steel guideways. This is the same design SCM incorporates into their high-end sliding table saws. The sliding table greatly increases the shaper’s versatility, and makes tenoning operations as easy as can be.\u003c\/p\u003e\n\u003cp\u003eTooling capabilities are endless on the TW 55es thanks to the interchangeable, tilting spindle. Users can create angled cuts between 45° and 90° simply with a straight cutter, which also saves costs from needing to purchase expensive, specialized cutters. Custom and crown moldings are therefore a breeze to perform!\u003c\/p\u003e\n\u003cp\u003eThe Minimax TW 55es features a fence with reference pins for easy repositioning and numeric readouts for micrometric adjustment. It also comes with a miter gauge with flip-over stops for angled cuts and eccentric clamp. The flip-stops adjust along the fence for repeatable accuracy by creating easy to use reference points, while the eccentric clamp securely holds the workpiece in place.\u003c\/p\u003e\n\u003cp\u003eAlso available with an \u003ca rel=\"noopener\" title=\"SCM Minimax TW 55es Tilting Spindle Shaper 8hp, 3PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/scm-minimax-tw-55es-tilting-spindle-shaper-8hp-3ph-220v\" target=\"_blank\"\u003e8HP, 3-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSpindle fence with reference pins for easy repositioning and numeric readouts for micrometric adjustment\u003c\/li\u003e\n\u003cli\u003eTenoning table and protection hood (275mm max. tool diameter)\u003c\/li\u003e\n\u003cli\u003eTilting spindle equipped with fixed handwheel w\/gravitational numerical readout\u003c\/li\u003e\n\u003cli\u003eInterchangeable 1.25\" spindle with reverse rotation\u003c\/li\u003e\n\u003cli\u003eExtruded anodized aluminum sliding table on high precision, hardened steel guideways\u003c\/li\u003e\n\u003cli\u003eElectric pre-setting for optional feeder\u003c\/li\u003e\n\u003cli\u003eAngular cutting device with two flip-over stops and eccentric clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle tilting range:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e45° to 90°\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCapacity, under the nut, w\/interchangeable spindle:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e3.3\" (85mm)\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003eMax. useful spindle length: \u003c\/strong\u003e3.\u003cspan\u003e5\" (90mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. tool dia. profiling:\u003c\/strong\u003e\u003cspan\u003e 8.25\" (210mm)\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eMax. tool dia. lowered under table at 90°:\u003c\/strong\u003e 9.44\" (240 mm)\u003cbr\u003e\u003cstrong\u003eSliding table dimensions: \u003c\/strong\u003e\u003cspan\u003e47.2\" x 14.2\" (1,200 x 360 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSpindle moulder speeds: \u003c\/strong\u003e\u003cspan\u003e4,000\/7,000\/9,000\/12,000 RPM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eExhaust outlets dia.:\u003c\/strong\u003e\u003cspan\u003e 4.75\" (120 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. required dust collection:\u003c\/strong\u003e\u003cspan\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eGross weight: \u003c\/strong\u003e1,065 lbs.\u003cbr\u003e\u003cb\u003eMotor: \u003c\/b\u003e4.8HP\u003cbr\u003e\u003cstrong\u003e*Electrical: \u003c\/strong\u003e230V, single-phase, 60 Hz, 25 Amps\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Spindle (1-1\/4\")\u003c\/li\u003e\n\u003cli\u003eShaper push handle\u003c\/li\u003e\n\u003cli\u003eSpare belts\u003c\/li\u003e\n\u003cli\u003eToolbox and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOptional Accessories\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e The following accessories are optional and \u003cstrong\u003enot included with the machine\u003c\/strong\u003e. They can be purchased at any time, but you can also take advantage of Accessory Bundle Pricing (applicable only at the time of machine purchase). Call us at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e for more information and to place your order!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional eccentric clamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTenoning table and protection hood\u003c\/strong\u003e\u003cbr\u003e-275mm max. tool diameter with electrical limitation at 4,000 RPM. Available only with 1-1\/4\" spindle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle shaper protection\u003c\/strong\u003e\u003cbr\u003e-For spindle diameters 30mm, 35mm, 3\/4\", 1\", and 1-1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle shaper protection\u003c\/strong\u003e\u003cbr\u003e-For spindle diameters 40mm and 50mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnodized aluminum tables for spindle shaper fence\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle\u003c\/strong\u003e\u003cbr\u003e-Available in diameters of 30mm, 35mm, 40mm, 50mm, 3\/4\", 1\", and 1-1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle (125mm length)\u003c\/strong\u003e\u003cbr\u003e-Available in diameters of 30mm, 35mm, 40mm, 50mm, and 1-1\/4\" (\u003cstrong\u003e*Note:\u003c\/strong\u003e It is not possible to lower this spindle below the worktable. Therefore, it is necessary to remove it in order to clear the table.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle for router bits\u003c\/strong\u003e\u003cbr\u003e-Complete with a 1\/2\" clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupport frame (1,200 x 650mm)\u003c\/strong\u003e\u003cbr\u003e-Telescopic fence with 2 flip-over stops, eccentric clamp, and swinging arm support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwing away support for feeder\u003c\/strong\u003e\u003cbr\u003e-\u003cstrong\u003eNote:\u003c\/strong\u003e No electric pre-setting for feeder.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":19571275694198,"sku":"TW55es-1ph","price":12675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/TW55es-1.jpg?v=1671040640"},{"product_id":"scm-linvincibile-ti-7-tilting-spindle-shaper","title":"SCM L'invincibile TI 7 Tilting Spindle Shaper with eye-S Touch Screen Control","description":"\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe L’invincibile TI 7 is the most technologically advanced shaper being sold today. It is a tilting spindle CNC machining center with quick-change HSK tooling. With the patented fulcrum point for tilted movement, there is no adjustment or electrical compensation necessary for the vertical spindle position or the fence position. Additionally, the L’invincibile TI 7 works in conjunction with the HSK 63B tool holder and the EASY TOUCH interface to read your tool profile. With that kind of technology, this shaper is more like a CNC work-center!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you could turn a combat tank into a shaper, this would be the outcome. The TI 7 is a tilting arbor shaper like nothing you’ve ever seen. The dovetail trunnions are machined to extremely tight tolerances to ensure perfect angular positioning. Their large size ensures rigidity under load. Ball screw movements are used for the precise positioning of all machine axes. Prismatic guides keep linear movement perfectly straight. This is a patented tilt system with a zero fulcrum point.\u003c\/p\u003e\n\u003cp\u003eThe use of HSK 63B tool holders allows you to share tooling with other CNC equipment making this shaper the perfect platform for backing up the machines. Also featured is the Auto tool detection. This feature allows the programmer to recognize what tool has been installed on the shaper, via the spindle, and will indicate the programs associated with that tool, the maximum speed for that tool, and the maximum vertical stroke among other useful information. The spindles are engineered to handle a tool up to 40lbs.\u003c\/p\u003e\n\u003cp\u003eThe “Flex” Fence enables the user to quickly change to different types of fences, use the tenoning table, or to change dust hoods. It is guaranteed to remain square due to its linear guides and alignment pin. This system is fully automated thru the controller and will easily save hours of set up time. Also, the fence has the ability to move behind the spindle for routing work.\u003c\/p\u003e\n\u003cp\u003eWith a sectioned table there is no longer any wasted time searching for that correct table ring to fit your cutterhead. This table design has been used on SCM’s Superset moulders and the technology has been transferred to our shapers. The sectioned table position is automated by the Vanguard controller based on the tool diameter in the program.\u003c\/p\u003e\n\u003cp\u003eOne thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles or using stacked tooling. SCM Group ensures maximum quality in its shapers by using a liquid cooled direct drive electro spindle assembly whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e7 + Axis integrated touch screen control over:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eSpindle speed, height \u0026amp; angle, fence infeed \u0026amp; out- feed sectioned table, feeder support vert. \u0026amp; horiz.\u003c\/li\u003e\n\u003cli\u003eProgram storage for up to 999 programs\u003c\/li\u003e\n\u003cli\u003eAutomatic Tool Detection System with mobile electromagnetic readout to identify the tool on the machine with reference to the detected tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e12hp electrospindle with maximum power available starting at 3000 rpm\u003c\/li\u003e\n\u003cli\u003eSide cast-iron extension tables, and front telescopic bar (“LL” version)\u003c\/li\u003e\n\u003cli\u003eInverter control of electrospindle with range from 900 to 10,000 rpm and electronic brake\u003c\/li\u003e\n\u003cli\u003ePneumatic HSK B tool change system with air blower system for clean contact surfaces, and safety sensors\u003c\/li\u003e\n\u003cli\u003efor tool change operation monitoring: spindle rotation, tool taper lock go \/ no-go sensor\u003c\/li\u003e\n\u003cli\u003e(5) HSK B 63 spindles 1-1\/4\" diameter with tooling cart\u003c\/li\u003e\n\u003cli\u003eAutomatic tooling detection\u003c\/li\u003e\n\u003cli\u003eSpindle vertical movement on two precision linear guides, and tilt movement on precision arch-formed\u003c\/li\u003e\n\u003cli\u003eDovetail trunnion through recirculating ball screw drives\u003c\/li\u003e\n\u003cli\u003eFlex profiling fence system with 205mm stroke referenced to the center of the spindle shaft, with movement on two linear guides by recirculating ball screw\u003c\/li\u003e\n\u003cli\u003eFence includes the ability to stroke behind spindle\u003c\/li\u003e\n\u003cli\u003eSpindle tilt angle from +45° to - 45° with maximum possible tool projection through angle range\u003c\/li\u003e\n\u003cli\u003eUpper mobile control panel\u003c\/li\u003e\n\u003cli\u003eCope attachment with 500 mm stroke including miter gauge and clamp\u003c\/li\u003e\n\u003cli\u003eFast: sectional table to adjust for tool diameter\u003c\/li\u003e\n\u003cli\u003ePowered cross support mount for feeder with readout\u003c\/li\u003e\n\u003cli\u003eAluminum fences\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eLow tension circuit (110v by transformer)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 15hp\u003cbr\u003e\u003cstrong\u003eTable Dimensions:\u003c\/strong\u003e 48\" x 29.5\" (1,194 x 750 mm)\u003cbr\u003e\u003cstrong\u003eTable Height:\u003c\/strong\u003e 36\" (900 mm)\u003cbr\u003e\u003cstrong\u003eWorking Height of Spindle (under the nut):\u003c\/strong\u003e 5.5\" (140 mm)\u003cbr\u003e\u003cstrong\u003eSpindle Tilting:\u003c\/strong\u003e 0 to 45°, 0 to -10°\u003cbr\u003e\u003cstrong\u003eMax. Tool Diameter w\/ Profile Fence:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMax. Tool Dia. Retractable Under Table:\u003c\/strong\u003e 12\" x 2.9\"\u003cbr\u003e\u003cstrong\u003eSpindle Speeds:\u003c\/strong\u003e 900 to 10,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Outlet on Fence and and Rear Base:\u003c\/strong\u003e 120 mm each\u003cbr\u003e\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e 98\" x 29\" x 41\"\u003cbr\u003e\u003cstrong\u003eElectrical Requirements:\u003c\/strong\u003e 45 amps @ 230v\u003cbr\u003e\u003cstrong\u003eMin. Working Air Pressure:\u003c\/strong\u003e 88 PSI\u003cbr\u003e\u003cstrong\u003eDust Extraction:\u003c\/strong\u003e 680 CFM x 2\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":19572247232630,"sku":"TI7eye-s","price":72375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TI_7_Eye_S.png?v=1731356093"},{"product_id":"minimax-tw-45c-fixed-spindle-shaper","title":"SCM Minimax TW 45C Fixed Spindle Shaper","description":"\u003cp\u003eCabinet and custom millwork shops, furniture makers, and door and window manufacturers all utilize shapers to cut, shape, and profile wood edges. The Minimax TW 45C is a 3-speed, 4HP spindle shaper built for any routing or shaping job. Featuring a standard 1.25” spindle for universal cutters, a sliding table with T-slots, and a miter gauge for angled cuts, this machine is ready to increase your productivity!\u003c\/p\u003e\n\u003cp\u003eThe cast-iron structure on the Minimax TW 45C provides stability in every cut. The motor is closed off by a cast-iron “cup” to protect internal components from sawdust, shavings, and dirt. The sliding table is made of extruded anodized aluminum with a closed honeycomb structure for maximum rigidity. Exclusive guideways consisting of calibrated, hardened F550 SX steel provide long-life to the sliding table.\u003c\/p\u003e\n\u003cp\u003eThe 270mm sliding table on the TW 45C is complete with a miter gauge, two flip stops, and an eccentric clamp. The miter gauge with flip-over stops easily creates angled cuts. The flip-stops adjust along the fence for repeatable accuracy by creating easy to use reference points, while the eccentric clamp securely holds the workpiece in place.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCast-iron structure is extremely sturdy\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUnit is closed off by a cast-iron “cup” to protect internal components\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes eccentric clamp and miter gauge with flip-stops\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpindle shaper fence with micrometric adjustment complete with vertical and horizontal pressers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e270mm sliding table very useful also for tenoning\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cspan class=\"h5\"\u003eSpecs\u003c\/span\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity under the nut: \u003c\/strong\u003e3.75\"\u003cbr\u003e\u003cstrong\u003eTable height: \u003c\/strong\u003e34\"\u003cstrong\u003e\u003cbr\u003eMax. useful spindle length:\u003c\/strong\u003e 4\" (100mm)\u003cbr\u003e\u003cstrong\u003eSpindle moulder speeds:\u003c\/strong\u003e 3,500\/6,000\/8,000\/10,000 RPM\u003cbr\u003e\u003cstrong\u003eMax. tool diameter when profiling:\u003c\/strong\u003e 8.26\" (210 mm)\u003cbr\u003e\u003cstrong\u003eMax. tool diameter lowered under the table at 90°:\u003c\/strong\u003e 7\" (180 mm)\u003cbr\u003e\u003cstrong\u003eMax. tool diameter when tenoning:\u003c\/strong\u003e 10.82\" (275 mm)\u003cbr\u003e\u003cstrong\u003eSingle-phase motor:\u003c\/strong\u003e 4hp\u003cbr\u003e\u003cstrong\u003eDust extraction port dia.: \u003c\/strong\u003e4.75\" (120 mm)\u003cbr\u003e\u003cstrong\u003eMin. suggested dust extraction vol.: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003cstrong\u003eShipping weight: \u003c\/strong\u003e642 lbs.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":19572397310070,"sku":"TW45c","price":6875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TW45C-1_5b511ec1-b8ba-4542-b380-c11c935af123.jpg?v=1685020881"},{"product_id":"scm-class-tf-130-fixed-spindle-shaper","title":"SCM Class TF 130 Fixed Spindle Shaper","description":"\u003c!-- ============================================================\n     PRODUCT DESCRIPTION — PASTE INTO SHOPIFY PRODUCT BODY HTML\n     ============================================================ --\u003e\n\u003cp\u003eThe Class TF 130 is built for shops that run the shaper as a production tool. Eleven horsepower through an MK5 interchangeable spindle with 7 inches of working height below the nut, on a normalized welded steel base that holds alignment for the life of the machine.\u003c\/p\u003e\n\u003c!-- AT A GLANCE --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 HP, 220V, three-phase:\u003c\/strong\u003e 25A service required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMK5 interchangeable spindle:\u003c\/strong\u003e larger Morse taper than MK4, more rigidity, less vibration under heavy cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\" (180mm) working height below the nut:\u003c\/strong\u003e run a complete cabinet door set (stile, rail, and raised panel) stacked on one spindle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormalized welded steel base:\u003c\/strong\u003e welded frame, heat-treated after fabrication for long-term dimensional stability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 speeds: \u003c\/strong\u003e3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-accessible handwheels:\u003c\/strong\u003e adjust fence and spindle height without reaching behind the machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelocating pins:\u003c\/strong\u003e remove the fence for tool changes, return it to exact position\u003c\/li\u003e\n\u003cli\u003eMechanical brake + foot pedal lock\u003c\/li\u003e\n\u003cli\u003eT-SET rapid locking preset standard\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- THE DETAILS --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TF 130 is a different category of machine from entry-level shapers, and two specifications explain why: 7 inches of working height below the nut, and the MK5 spindle system.\u003c\/p\u003e\n\u003cp\u003eSeven inches determines what you can stack on the spindle. A full cabinet door set — stile cutter, rail cutter, and raised panel cutter — stacked on one spindle requires roughly 5 to 6 inches of usable height. The TF 130’s 7 inches handles complete three-piece door sets with room to work. All three cuts happen by raising or lowering the spindle. No tool changes between profiles, no teardown between operations. A shaper with 3.75 inches of capacity won’t fit the stack. That’s the practical dividing line.\u003c\/p\u003e\n\u003cp\u003eThe MK5 spindle system is the other piece. MK stands for Morsekegel — the Morse Taper standardized in ISO 296 and DIN 228-1 and used across precision metalworking equipment worldwide. The shallow taper angle means cutting forces wedge the spindle and socket together, tightening grip under load. MK5 is a larger-diameter taper than the MK4 used on the Nova TF 110, with more contact area, greater rigidity, and better resistance to vibration transfer into the cutter head. On tall profiles and stacked tooling, the difference shows up in cut quality.\u003c\/p\u003e\n\u003cp\u003eThe base is worth understanding. The TF 130 is built on a welded steel frame that goes through normalization after fabrication — a heat treatment that relieves internal stresses and stabilizes the metal dimensionally. All machine mechanisms mount and align to this single frame. A frame built from bolted castings has no fixed reference point and shifts under sustained load and vibration. This base does not.\u003c\/p\u003e\n\u003cp\u003eSetup is built for production speed. Both the spindle height handwheel and fence adjustment handwheels are accessible from the front of the machine. Mechanical readouts on both give accurate positioning without trial cuts. Relocating pins let you pull the fence for cutter access and return it to the exact previous position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom configurations available: \u003c\/strong\u003eFAST section table, FLEX fence system, TL tenoning version, PRO-10 TL tenoning version with THK linear guides, 14 HP motor upgrade, automatic star-delta start. Custom configurations must be specified at time of order. These options cannot be retrofitted. Call before ordering to add any of these options to your machine. Additional charges and lead times apply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e“LL” Profiling Version: \u003c\/strong\u003eTwo cast-iron worktable extensions totaling 98.4\" of support surface. Required for crown moulding, casing, and any long stock where the standard table doesn’t support entry and exit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarriage on Fixed Table: \u003c\/strong\u003eFor small tenoning operations. Swiveling fence (±60°), mobile stops, telescopic extension, eccentric clamp. Handles haunched mortise-and-tenon, stub tenons, and cope cuts on door components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional MK5 Spindles: \u003c\/strong\u003eAvailable in multiple bore diameters. A pre-set second spindle means profile changes in under a minute.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMK5 Right-Hand \/ Left-Hand Rotation Tool Holders: \u003c\/strong\u003eMK5 spindles fitted with an ER32 collet for running 1\/2\" shank router bits. Select the holder that matches your spindle rotation direction — thread direction on the locking nut must oppose rotation so cutting forces tighten rather than loosen it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT-SET Rapid Tool Locking: \u003c\/strong\u003eThe pneumatic air gun that pairs with the T-SET preset spindle. Locks and unlocks the cutter head in seconds without a wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual Feeder Support: \u003c\/strong\u003eHorizontal and vertical adjustment with mechanical digital readout. Mounts the FEED 48 feeder and allows it to be swung clear of the table when not in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEED 48 Power Feeder: \u003c\/strong\u003eFour-roller feeder, 8 speeds from 7 to 108 FPM, 220V three-phase. Maintains consistent feed speed through every pass and keeps the operator’s hands clear of the cutter zone. Requires a separate 220V three-phase circuit independent of the machine motor.\u003c\/p\u003e\n\u003c!-- FEATURES --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003c!-- SPECS TABLE --\u003e\u003c!-- OPTIONAL ACCESSORIES --\u003e\u003c!-- FAQ --\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 7 inches of working height actually buy me?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt determines what you can stack on the spindle at one time. A full cabinet door set — stile cutter, rail cutter, and raised panel cutter — stacked on one spindle requires roughly 5 to 6 inches of usable height. The TF 130’s 7 inches handles complete three-piece door sets. All three cuts happen by raising or lowering the spindle with no tool change between operations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the MK5 spindle and why does it matter versus MK4?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMK stands for Morsekegel — the ISO\/DIN-standardized Morse Taper used in drill press spindles, lathe tailstocks, and precision metalworking equipment worldwide. The self-holding taper geometry means cutting forces wedge the spindle and socket together, tightening grip under load. MK5 is a larger-diameter taper than MK4, with more contact area, greater rigidity, and better vibration absorption. On tall profiles and stacked tooling, that difference shows up in cut quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is T-SET and do I need the air gun at purchase?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eT-SET is SCM’s pneumatic rapid tool locking system. With a standard MK spindle, tool changes require a wrench. With T-SET, an air gun locks and unlocks the cutter in seconds. The TF 130 includes T-SET preset as standard — the spindle is already machined for the mechanism. The T-SET air gun is an optional add-on. If you change tooling frequently, it’s worth adding at the time of machine purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the normalized welded steel base?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe frame is fabricated by welding, then heat-treated through normalization to relieve internal stresses and stabilize the metal dimensionally. Every machine component mounts to this single reference frame. A frame built from bolted castings has no fixed reference point and shifts under sustained load and vibration. This base does not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need three-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The TF 130 requires 220V, three-phase, 25A service. If your shop does not have three-phase service, a rotary phase converter off a 240V single-phase feed is a proven solution used widely in production shop environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA minimum of 986 CFM at a 4.7\" (120mm) port. The TF 130 has dual exhaust outlets — one at the spindle hood and one at the machine base. Confirm your collector meets the CFM requirement at both drops simultaneously.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The TF 130 qualifies as a capital equipment purchase under Section 179 of the U.S. tax code, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service — rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"\/pages\/section-179\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMK5 Interchangeable Spindle with T-SET Preset: \u003c\/strong\u003eThe MK5 Morse taper is the largest in SCM’s fixed spindle lineup. The self-holding geometry means cutting forces increase grip between spindle shaft and socket rather than loosening it. T-SET preset is standard — the spindle is already machined for SCM’s pneumatic rapid locking mechanism. The T-SET air gun is an optional add-on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNormalized Welded Steel Base: \u003c\/strong\u003eThe frame is fabricated by welding, then heat-treated through normalization to relieve internal stresses and stabilize the metal dimensionally. Every mechanism mounts and aligns to this single reference frame. No bolted castings, no alignment shift under sustained load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7\" Working Height Below the Nut: \u003c\/strong\u003eSeven inches of usable spindle height lets you run a complete cabinet door set — stile, rail, and raised panel profiles — stacked on one spindle. All three cuts happen by adjusting spindle height. No tool change between operations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge Spindle Assembly: \u003c\/strong\u003eSCM builds the spindle unit as a high-mass assembly. The increased spindle mass absorbs vibration before it reaches the cutter head. The spindle is enclosed in a cast-iron cup that protects internal components from shavings and sawdust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5-Speed Configuration with Electronic Display: \u003c\/strong\u003eSpeeds of 3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000 RPM. The 3,000 RPM setting opens up large-diameter tooling options — raised panel profiles, full cabinet door sets, and large moulding heads that exceed safe peripheral speed limits at higher settings. Indicator lights confirm selected speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFront-Accessible Handwheels: \u003c\/strong\u003eBoth the spindle height handwheel and fence adjustment handwheels are positioned for access from the front of the machine. The fence adjusts in two planes: total fence position relative to tool centerline, and infeed fence position for cut depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFence with Relocating Pins and Mechanical Readouts: \u003c\/strong\u003eMechanical readouts on both fence adjustments give accurate positioning without test cuts. Relocating pins allow fence removal for cutter access and exact return to the previous setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Brake + Foot Pedal Spindle Lock: \u003c\/strong\u003eThe main motor brake stops the spindle quickly after shutoff. The foot pedal locks the spindle for cutter changes, freeing both hands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReverse Spindle Rotation: \u003c\/strong\u003eElectrical interlocking on reverse rotation prevents unintended direction changes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSA-Rated Electrical Components: \u003c\/strong\u003eAll electrical components carry CSA certification. An auxiliary low-voltage circuit (110V internal transformer) runs controls separately from the 220V drive circuit. The main power switch locks in the off position with a padlock.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMotor: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e11 HP (8 kW), Three-Phase, 220V, 25A\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eWorktable Dimensions:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e47.19\" x 28.69\" (1,200 x 730mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eWorking Length of Spindle (1-1\/4\"):\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e7\" (180mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSpindle Base Projection from Table:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e3.56\" (92mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMax Tool Diameter (standard table):\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e12.56\" x 3.31\" (320 x 85mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eDust Port Diameter: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e4.7\" (120mm) — dual ports (spindle hood and base)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eMinimum Dust Extraction:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e986 CFM\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSpindle System: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003eMK5 Interchangeable (T-SET preset standard)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eIncluded Spindle Diameter:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e1-1\/4\"\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSpindle Speeds: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000 RPM\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e: 220V, 60 Hz, Three-Phase\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!-- INCLUDES --\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMK5 1-1\/4\" interchangeable spindle (T-SET rapid locking preset)\u003c\/li\u003e\n\u003cli\u003eTool kit: wrenches, allen wrenches\u003c\/li\u003e\n\u003cli\u003eUser manual and spare parts catalog\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eItems being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":19572557316214,"sku":"ClassTF130","price":14875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF130main_3ca60e5b-21d3-4b6c-8edc-4a1e3f180483.jpg?v=1718822736"},{"product_id":"scm-linvincibile-tf-5-fixed-spindle-shaper","title":"SCM L'invincibile TF 5 Fixed Spindle Shaper","description":"\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"SCM L’invincibile TF 5 configuration\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF_5_Configuration_Black_Friday_2024.pdf?v=1731699973\" target=\"_blank\"\u003e\u003cstrong\u003eMachine configuration\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe L’invincibile TF 5 combines old world quality with new age technology. It comes standard with the \"Eye-S,\" a 15\" touch-screen control panel that gives you full control of up to 4 working axes: spindle height, shaft rotating speed, \"FAST\" table, and whole fence assembly. The Eye-S also has storage capacity for up to 1,000 programs and 1,000 tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \"FLEX\" fence can retract and be re-positioned on the worktable in one simple movement. It can also be moved away from the worktable if needed. Includes aluminum profiling fence with connecting bars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\/protections on the TF 5 include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSpindle protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMechanical brake on main motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety sensors for changing tool operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRotating stop control, tool taper locking\/unlocking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety microswitch on motor access door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEmergency push buttons\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMain power switch can be locked in the off position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOverload switch protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e24V auxiliary low voltage circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\"Eye-S\" 15\" touch-screen display\u003c\/li\u003e\n\u003cli\u003eFLEX fence with auto adjustment\u003c\/li\u003e\n\u003cli\u003eElectric presetting for feeder support\u003c\/li\u003e\n\u003cli\u003eReverse spindle rotation\u003c\/li\u003e\n\u003cli\u003e\"FAST\" section table with auto adjustment\u003c\/li\u003e\n\u003cli\u003eAuto star-delta start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor power:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e10hp\u003cbr\u003e\u003cstrong\u003eWorktable dimensions:\u003c\/strong\u003e 47.19\" x 28.69\" (1,200 x 730mm)\u003cbr\u003e\u003cstrong\u003eWorking length of spindle:\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eSpindle base projection from table:\u003c\/strong\u003e 2\" (52mm)\u003cbr\u003e\u003cstrong\u003eMax. tool dia. retractable (under table):\u003c\/strong\u003e 11.75\" x 3.31\" (300 x 85mm)\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 4.69\" (120mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V\/400V, 3-phase, 60 Hz, 26 A (machine is 400V and includes an autotransformer for 220V - 400V)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*\u003c\/strong\u003eSubject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":19573114929270,"sku":"TF5","price":55375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF5-1.jpg?v=1732558555"},{"product_id":"powermatic-ts29-shaper","title":"Powermatic TS29 Shaper","description":"\u003cp\u003eThe TS29 Tilt\/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table ensure a clear work area and improved finish.\u003c\/p\u003e\n\u003cp\u003eAn extra large quill assembly with a full seven-inch stroke has three oversize bearings and the ability to tilt, adding versatility and ensuring long, trouble-free performance. Powered by a big 7-1\/2HP motor that drives the spindle forward and reverse with five speeds.\u003c\/p\u003e\n\u003cp\u003eThe massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56\" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFive spindle speeds in forward and reverse with lighted indicator\u003c\/li\u003e\n\u003cli\u003eFull coverage guard with workpiece hold downs\u003c\/li\u003e\n\u003cli\u003eFully adjustable fence has dual digital readout positioning with micrometer adjustments\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\", 1\" and 1-1\/4\" spindles\u003c\/li\u003e\n\u003cli\u003eLarge diameter multiple table inserts accommodate virtually any size cutter\u003c\/li\u003e\n\u003cli\u003eLarge table with built-in slider with room for stock feeder\u003c\/li\u003e\n\u003cli\u003eSliding table travels a full 49-1\/4 inches\u003c\/li\u003e\n\u003cli\u003eTilting spindle for additional angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required (CFM):\u003c\/strong\u003e 800\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eMaximum Diameter Cutter Above Table:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eMaximum Diameter Cutter Below Table:\u003c\/strong\u003e 9\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power (HP):\u003c\/strong\u003e 7-1\/2\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 230\/460\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 230\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19879691878518,"sku":"PM9-1791284","price":15399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791284-1.jpg?v=1748888350"},{"product_id":"powermatic-pm2700-shaper","title":"Powermatic PM2700 Shaper 5hp, 1 PH, 230V","description":"\u003cp\u003eThe Powermatic PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes.\u003c\/p\u003e\n\u003cp\u003eThe extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDigital readout gives the use exact spindle height and allows for .001\" adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003c\/li\u003e\n\u003cli\u003eHeavy duty cast iron base\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" and 1-1\/4\" spindles\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable fence sides\u003c\/li\u003e\n\u003cli\u003eIntegrated casters can be raised and lowered to mobilize shaper\u003c\/li\u003e\n\u003cli\u003eMicro adjust control knobs allow for precision adjustment for the fence\u003c\/li\u003e\n\u003cli\u003eSuperior clear cutter guard promotes safety, allows observation of the entire cut\u003c\/li\u003e\n\u003cli\u003eTable predrilled and tapped for feeder mounting in two locations\u003c\/li\u003e\n\u003cli\u003eTwo speed reversible spindle speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":21869945290870,"sku":"PM9-1280101C","price":5719.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1280100C-1.jpg?v=1748888349"},{"product_id":"mfk-700-eq-set","title":"Festool Module Edge Router MFK 700 EQ Set","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for edge trimming, laminate, and profile routing\u003c\/li\u003e\n\u003cli\u003ePrecision fine depth adjustment by 1\/256\" (0.1mm) for exact trimming needs\u003c\/li\u003e\n\u003cli\u003ePowerful 720 watt motor is just shy of 1HP\u003c\/li\u003e\n\u003cli\u003eVertical and horizontal extra-wide bases provides ample support area near edges or on narrow stock\u003c\/li\u003e\n\u003cli\u003eIncludes 8mm collet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePacked with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1\/256\" (1\/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks. \u003c\/p\u003e\n\u003cp\u003eFestool Routers surpass the most demanding requirements. But even more surprising is the versatility, accuracy, and ergonomic comfort and control present across the lineup. Couple the MFK 700 with a \u003ca title=\"All Dust Extractors\" href=\"https:\/\/www.oaktreesupply.com\/collections\/dust-extractors-menu\" target=\"_blank\"\u003eFestool CT Dust Extractor\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rails\" title=\"Festool FS Guide Rails\" target=\"_blank\"\u003eFS Guide Rail\u003c\/a\u003e to experience an incomparable system working at all levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to the nature of the horizontal base design, there is a limit to the bit size for use in this configuration. Do not use a bit with a cutting length greater than 5\/8\" (16 mm) and a shank length of 1-13\/16\" (46 mm). For greatest range of adjustment a 3\/4\" (19 mm) bit diameter is recommended. \u003c\/p\u003e\n\u003cp\u003eFor trimming edge banding with a horizontal base, we recommend the \u003ca title=\"Festool Edge Trimming Cutter HW D 19\/16 S8 OFK 700 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-router-bits\" target=\"_blank\"\u003eHW D 19\/16 S8\u003c\/a\u003e Festool Bit. \u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePrecision Adjustments:\u003c\/strong\u003e Micro-adjustable depth control to 1\/256\" (1\/10mm) with dual locking columns for precise routing control.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMMC Electronic \u0026amp; Variable Speed Control:\u003c\/strong\u003e\u003cspan\u003e MMC electronics improve cut performance and extend the life of the tool, delivering features such as soft start, constant speed under load, and thermal and overload protection.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e720 Watt Motor: \u003c\/strong\u003e\u003cspan\u003eThe MFK 700 Router is equipped with a 720 Watt motor. With that much power, you can easily tackle most trimming, profiling and routing applications. The motor utilizes onboard thermal monitoring to protect against overload and soft start technology ensuring long service life.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eMultiple collet sizes: \u003c\/strong\u003e\u003cspan\u003e1\/4\" and 8mm collets available, allowing the use of a large variety of bits for broader routing applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eTool-Less Base System: \u003c\/strong\u003e\u003cspan\u003eQuickly and easily change between the horizontal and vertical bases supplied with the MFK 700. All components of the MFK 700 router set can be attached and removed without tools. Simply give the locking knob three turns to loosen or tighten the locking mechanism for the bases.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 1\/2\" (14mm)\u003cbr\u003e\u003cstrong\u003eMax. cutter diameter:\u003c\/strong\u003e 1-1\/4\" (32mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection diameter:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.1 lbs. (2.3 kg)\u003cbr\u003e\u003cstrong\u003eCollet diameter\u003c\/strong\u003e 1\/4\" - 5\/16\" (6 - 8mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 720 watt\u003c\/div\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVertical base\u003c\/li\u003e\n\u003cli\u003e1.5° Horizontal base\u003c\/li\u003e\n\u003cli\u003e8mm collet\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDust extraction hood\u003c\/li\u003e\n\u003cli\u003eCollet wrench\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug-It power cord\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RVdhVV4AfWg\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":20136757166198,"sku":"576239","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576239-1.jpg?v=1754021648"},{"product_id":"jet-jws-25x-3hp-shaper","title":"JET JWS-25X 3hp Shaper","description":"\u003cp\u003eThe new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25\" x 25-1\/2\" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and the right fence has a built-in 4\" dust port.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eExtra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum fence comes with T-Slots and 2 feather board hold-downs\u003c\/li\u003e\n\u003cli\u003eReversible spindle speeds for diverse shaping jobs\u003c\/li\u003e\n\u003cli\u003eSpindle lock for safe and easy cutter set up\u003c\/li\u003e\n\u003cli\u003eStarting Pins for irregular shaping\u003c\/li\u003e\n\u003cli\u003eTwo-speeds let you select the best speed and torque for different cutter diameters\u003c\/li\u003e\n\u003cli\u003eV-belt transfers maximum power to the spindle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 16 A\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 A\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 3-1\/2\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 33\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Inserts:\u003c\/strong\u003e 2\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Opening Diameter:\u003c\/strong\u003e 6-9\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 25-1\/2\u003cspan\u003e\"\u003c\/span\u003e x 25\u003cspan\u003e\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":20331413995638,"sku":"JT9-708309","price":3244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/708309-1.jpg?v=1748882576"},{"product_id":"jet-jws-35x3-1-3hp-shaper","title":"JET JWS-35X3-1 Shaper 3hp, 1PH, 230V","description":"\u003cp\u003eThe JET JWS-35X Heavy-Duty Shaper brings the accuracy, durability, and power to handle tough jobs with the versatility you need. High quality materials and construction along with a user-friendly array of features makes the JET JWS-35X Heavy-Duty Shaper a high value addition to any shop.\u003c\/p\u003e\n\u003cp\u003eThe JET JWS-35X Shaper features a spacious 26-3\/4\" x 32-1\/4\" precision-ground cast iron table. Pre-drilled and tapped holes on the rear table corners are ready to mount most \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/power-feeders-1\" title=\"All Power Feeders\" rel=\"noopener\" target=\"_blank\"\u003epower feeders\u003c\/a\u003e on either side of the cutter. A full-sized 3\/4\" x 3\/8\" T-shaped miter slot on the table accepts the included miter gauge. This standard sized slot also accepts common aftermarket tooling and shop-made jigs.\u003c\/p\u003e\n\u003cp\u003eThe table has a 7-1\/4\"-diameter opening for compatibility with the largest of cutter sizes. Inserts are also included to reduce the table opening to 4-7\/8\" and 2-5\/8\". Mounted on the all steel base cabinet, the table surface is a comfortable 33-1\/4\" above the floor. A heavy-duty, screw-in starting pin threads into holes on the left and right of the cutter to help make many hand operations safer.\u003c\/p\u003e\n\u003cp\u003eA large, solid fence system with fully adjustable left and right face halves gives you the stability and control for precision work. The fence faces are infinitely adjustable on their mounts and are each secured with a single finger-operated knob. Both extruded aluminum faces have grooves in them that make attaching wooden faces or the included feather boards easy and secure. The left fence half has a micro adjuster (front to back) for setting up ultra precise jointing operations. A gauge at its adjusting knob helps set the precise amount of offset desired for your jointing operation.\u003c\/p\u003e\n\u003cp\u003eThere are four spindle speeds on the JWS-35X: 4000, 6000, 8000, and 10,000RPM. The speeds are generated by a set of precisely machined stepped pulleys on the motor and spindle shaft. The shaper connects the pulleys with a Poly-V-belt, known for smooth power transmission, resistance to slipping and low heat buildup.\u003c\/p\u003e\n\u003cp\u003eThe JET JWS-35X comes with a 1-1\/4\" diameter, 4\" tall (under the nut) spindle. The spindle is equipped with a full set of spacers so it can secure shaper cutters of virtually any thickness. The spindle mounts into a large, self-centering tapered seat and is locked in place by a large captured nut and a heavy steel drawbar for security. The spindle has a full 4\" vertical travel to accommodate large and small cutters as well as using a portion of a cutters profile.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturers' defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eMake your Shaper mobile with the \u003ca rel=\"noopener noreferrer\" title=\"JET JMB-UMB-HD Universal Mobile Base product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/jet-universal-mobile-base\" target=\"_blank\"\u003eJMB-UMB-HD Universal Mobile Base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4\" Dust port built into fence for convenient hookup to any dust collection system\u003c\/li\u003e\n\u003cli\u003eExtra-large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum fence comes with T-Slots and 2 feather board hold-downs\u003c\/li\u003e\n\u003cli\u003eFour RPM speeds (4,000,\/6,000\/8,000\/10,000) let you select the best speed and torque for different cutter diameters\u003c\/li\u003e\n\u003cli\u003eLarge 26-3\/4\" x 32-1\/4\" precision-ground cast iron table provides a durable work area and is predrilled for power feeder\u003c\/li\u003e\n\u003cli\u003ePoly-V-belt transfers maximum power to the spindle\u003c\/li\u003e\n\u003cli\u003ePowerful 3HP, 1Ph motor with magnetic controls\u003c\/li\u003e\n\u003cli\u003eReversible spindle speeds for diverse shaping jobs\u003c\/li\u003e\n\u003cli\u003eStarting Pins for irregular shaping\u003c\/li\u003e\n\u003cli\u003eV-belt transfers maximum power to the spindle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum Dust Collection Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eSpindle Size Under Nut:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 33-1\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Inserts:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eTable Opening Diameter:\u003c\/strong\u003e 6-19\/64\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 32-1\/4\u003cspan\u003e\"\u003c\/span\u003e x 26-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":20331892047990,"sku":"JT9-708323","price":4168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/708323-1_87f969f6-6b4c-401a-b0d7-c04a7b2b2b5a.jpg?v=1748882574"},{"product_id":"jet-jws-35x5-1-5hp-shaper","title":"JET JWS-35X5-1 5hp Shaper","description":"\u003cp\u003eThis heavy-duty JET Shaper is available with a powerful 5HP, 1Ph motor with magnetic controls. The four-speed (4000, 6000, 8000, 10000 RPM) step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters. The spindle is reversible, and receives maximum power transfer from the v-belt. The independently adjustable fences have micro adjust controls for precise positioning.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4\" Dust port built into fence for convenient hookup to any dust collection system\u003c\/li\u003e\n\u003cli\u003eExtra-large chrome handwheel is conveniently located for fast, easy, and accurate spindle height adjustments\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum fence comes with T-Slots and 2 feather board hold-downs\u003c\/li\u003e\n\u003cli\u003eFour RPM speeds (4000, 6000, 8000, 10000) let you select the best speed and torque for different cutter diameters\u003c\/li\u003e\n\u003cli\u003eLarge 26-3\/4\" x 32-1\/4\" precision-ground cast iron table provides a durable work area and is predrilled for power feeder\u003c\/li\u003e\n\u003cli\u003ePoly-V-belt transfers maximum power to the spindle\u003c\/li\u003e\n\u003cli\u003ePowerful 5HP, 1Ph motor with magnetic controls\u003c\/li\u003e\n\u003cli\u003eReversible spindle speeds for diverse shaping jobs\u003c\/li\u003e\n\u003cli\u003eStarting Pins for irregular shaping\u003c\/li\u003e\n\u003cli\u003eV-belt transfers maximum power to the spindle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 17 A\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eSpindle Size Under Nut:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 33-1\/4\"\u003cbr\u003e\u003cstrong\u003eTable Inserts:\u003c\/strong\u003e 2\"\u003cbr\u003e\u003cstrong\u003eTable Opening Diameter:\u003c\/strong\u003e 6-19\/64\"\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 32-1\/4 x 26-3\/4\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":20331917967478,"sku":"JT9-708326","price":4278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/708326-4.jpg?v=1748882573"},{"product_id":"laguna-compact-shaper-4-speed-3hp-1ph","title":"Laguna Compact Shaper 4-Speed 3hp, 1PH, 220V","description":"\u003cp\u003e\u003cspan\u003eThe Compact Shaper from Laguna is already regarded as best in class. Impressive precision fence and wide-range RPM make it a versatile investment for any pro. The fit and finish on this world class machine is incredible. You will be hard pressed to find a better value than the Compact Shaper: 4 speeds, generous sized table, wheels built right in. Easy spindle lock makes tool changes a snap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOne of the most impressive features is the speed change. A simple pull of a handle compresses the distance from the spindle to the pulley, changing speeds along the way. Another outstanding detail is the flat poly-groove belt which transfers more power with less vibration; something you won t find in this price range anywhere else.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\" title=\"Laguna Warranty page\" rel=\"noopener\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3hp, 1 Phase, 220 Volt 60 Hz     \u003cbr\u003e\u003cstrong\u003eTable Size:\u003c\/strong\u003e 32\" x 26-1\/2\"\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eSpindle Sizes:\u003c\/strong\u003e 3\/4\" \u0026amp; 1-1\/4\" (Incl.)                \u003cbr\u003e\u003cstrong\u003eRouter Collets:\u003c\/strong\u003e 1\/4\" \u0026amp; 1\/2\" (Incl.)\u003cbr\u003e\u003cstrong\u003eCapacity under Nut:\u003c\/strong\u003e 4 (1-1\/4\" Spindle)\u003cbr\u003e\u003cstrong\u003eSpindle Speeds:\u003c\/strong\u003e 4000, 6000, 8000, 10000 RPM\u003cbr\u003e\u003cstrong\u003eForward\/Reverse:\u003c\/strong\u003e Yes                             \u003cbr\u003e\u003cstrong\u003eTable Opening Diameter:\u003c\/strong\u003e 6-1\/4\"\u003cbr\u003e\u003cstrong\u003eTable Insert Opening Diameter:\u003c\/strong\u003e 2-1\/2\" , 4-5\/16\"\u003cbr\u003e\u003cstrong\u003eRotation:\u003c\/strong\u003e Forward\/Reverse\u003cbr\u003e\u003cstrong\u003eTable T-Slot:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eFence Size:\u003c\/strong\u003e 4-13\/16\" x16\"                      \u003cbr\u003e\u003cstrong\u003eDrive Belt:\u003c\/strong\u003e Flat Poly-Groove\u003cbr\u003e\u003cstrong\u003eTable Height From Floor:\u003c\/strong\u003e 34                   \u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eMicro Adjustment on Fence:\u003c\/strong\u003e Yes            \u003cbr\u003e\u003cstrong\u003eWheel System:\u003c\/strong\u003e Built In\u003cbr\u003e\u003cstrong\u003eWeight (Net\/Ship):\u003c\/strong\u003e 450\/500 Lbs.\u003cbr\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/by3jPp-tDoQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n[\/TABS]","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22155653480566,"sku":"MSHAP4SPD-3-0130","price":3649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MSHAP4SPD-3-0130-1.jpg?v=1709068411"},{"product_id":"laguna-pro-shaper-5hp-1ph-220v","title":"Laguna Pro Shaper 5hp, 1PH, 220V","description":"\u003cp\u003eThe Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. For starters, the table measures an impressive 31\" x 39\" and is predrilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1\/16 adjustment to the fence.\u003c\/p\u003e\n\u003cp\u003eInside you will find a heavy-duty 5HP 220 volt single-phase motor. It offers 3 speeds with a unique quick change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The Pro Shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel.\u003c\/p\u003e\n\u003cp\u003eThe fit and finish on this machine are top notch and even includes a wheel kit built right into the base.  The Laguna Pro Shaper is designed to give you years of trouble-free performance without breaking the bank.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title=\"Laguna Pro Shaper 7.5hp, 3PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-pro-shaper-7-5hp-220v-3-ph\" target=\"_blank\"\u003e7.5hp \u0026amp; 3-phase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty precision fence\u003c\/li\u003e\n\u003cli\u003eRack and pinion macro adjustment\u003c\/li\u003e\n\u003cli\u003eQuick-release belt change\u003c\/li\u003e\n\u003cli\u003e6 step spindle exchange\u003c\/li\u003e\n\u003cli\u003eDual dust ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!-- p--\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 5HP 1 phase 220V 60 HZ \u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 39-5\/16\" x 31-7\/16\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e x 3-1\/2\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eSpindle travel:\u003c\/strong\u003e 4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eSpindle Sizes:\u003c\/strong\u003e 3\/4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e and 1-1\/4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eCapacity Under Nut:\u003c\/strong\u003e 6 (for 1-1\/4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e ) \u0026amp; 4 (for 3\/4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e ) \u003cbr\u003e\u003cstrong\u003eRouter Collets:\u003c\/strong\u003e 1\/4\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e and 1\/2\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eSpindle speeds:\u003c\/strong\u003e 5,000 \/ 7,000 \/ 10,000 RPM \u003cbr\u003e\u003cstrong\u003eTable Opening Diameter:\u003c\/strong\u003e 7-5\/16\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eDigital Readout:\u003c\/strong\u003e Standard \u003cbr\u003e\u003cstrong\u003eDirection:\u003c\/strong\u003e Forward\/Reversing Switch \u003cbr\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e Micro Adjustment \u003cbr\u003e\u003cstrong\u003eWeight (Net\/Ship):\u003c\/strong\u003e 640\/720 Lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/j_ut61PucTo\" height=\"315\" width=\"100%\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22155727634550,"sku":"MSHAP5010-0130","price":5499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MSHAP5010-0130-1.jpg?v=1709068857"},{"product_id":"laguna-industrial-s-45t-shaper-5hp-1ph-220v","title":"Laguna Industrial S|45T Shaper 5hp, 1PH, 220V","description":"\u003cp\u003eThe Laguna S|45T Industrial Shaper was designed to be a heavy duty industrial workhorse for commercial applications. Weighing in at over 1000 lbs. it provides an exceptional value for any pro shop. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe combination of a dynamic electronically balanced spindle with robust solid castings makes the S45T run extremely smooth with absolute minimum vibration. The versatile 45° backward \u0026amp; 10° forward tilting spindle makes using a feeder much easier \u0026amp; keeps the cutting action close to the cast table rather than shaping from the top. Oversized cast table pre-drilled to accept most feeders \u0026amp; featuring sliding table with tenoning as standard. Complete with table \u0026amp; hold down clamp.\u003c\/p\u003e\n\u003cp\u003eThe sliding table has a full 30” stroke from miter fence to the center of the spindle. Miter gauge adjusts +\/- 45° The interchangeable spindle comes standard as 1-1\/4”, but other sizes including router collets are available. The fence is made from heavy cast iron \u0026amp; easily adjusts w micro-adjusters for both in\/outfeed. LED lights display the desired RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\" title=\"Laguna Warranty page\" rel=\"noopener\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-industrial-s-45t-shaper-7-5hp-3ph\" target=\"_blank\" title=\"Laguna Industrial S|45T Shaper 7.5hp, 3PH, 220V product page\" rel=\"noopener noreferrer\"\u003e7.5hp, 3 Phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 5hp , 1PH, 220 Volt, 60 Hz. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSpindle Tilt:\u003c\/strong\u003e 45° Backwards, 10° Forward \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSliding Table:\u003c\/strong\u003e 10-1\/4” X 39” \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 18-3\/4” \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eMain Table Incl. S\/T:\u003c\/strong\u003e 39-1\/2” X 31-5\/8” \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eTenoning Table:\u003c\/strong\u003e 13-3\/4 X 18-1\/2” \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eHold Down Clamp:\u003c\/strong\u003e Included \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eTenoning Table Adjustment:\u003c\/strong\u003e 7” Slide to Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 19” Right of Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 19” Left of Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSliding Table Far Right:\u003c\/strong\u003e 30” Spindle to Miter Gauge \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eTable Height:\u003c\/strong\u003e 35 3\/8” \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eCapacity Under Nut:\u003c\/strong\u003e 5”\/125 MM \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSpindle Stroke:\u003c\/strong\u003e 7”\/180 MM \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSpindle:\u003c\/strong\u003e 1 ¼” Interchangeable \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eMax. Tooling Diameter:\u003c\/strong\u003e 8-1\/4”\/210 MM Under Table \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eMax Tooling Diameter:\u003c\/strong\u003e 13” \/335 MM Above Table \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eRotation:\u003c\/strong\u003e Forward\/Reverse \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e Micro-adjust, Cast Body \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 3,000\/4,000\/6,000\/8,000\/10,000 RPM \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eReadout:\u003c\/strong\u003e LED Lights for speeds\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eReadout:\u003c\/strong\u003e Mechanical Tilt \u0026amp; Spindle Height \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eFeeder:\u003c\/strong\u003e Pre-drilled Left Back Corner \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eRouter Collet:\u003c\/strong\u003e Accepts, Not Included \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eWeight, Net\/Ship:\u003c\/strong\u003e 1,056\/1,350 Lbs.\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2GsNwX_rzXA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n[\/TABS]","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22155788025974,"sku":"MSHAPS45T-5-0167","price":12999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/S45T-1.jpg?v=1688579141"},{"product_id":"scm-minimax-tw-55es-tilting-spindle-shaper-8hp-3ph-220v","title":"SCM Minimax TW 55es Tilting Spindle Shaper - 8HP, 3PH, 220V","description":"\u003cp\u003eCabinet and custom millwork shops, furniture makers, and door and window manufacturers all utilize shapers to cut, shape, and profile wood edges. The Minimax TW 55es can handle any shaping, routing, or tenoning application you desire. This 4-speed heavy duty machine features a tilting spindle, sliding table on hardened steel guideways, and adjustable fence with micrometric adjustment.\u003c\/p\u003e\n\u003cp\u003eThe Minimax TW 55es is the culmination of years of experience in manufacturing quality solid wood products. The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable. A wide sliding table rides on hardened steel guideways. This is the same design SCM incorporates into their high-end sliding table saws. The sliding table greatly increases the shaper’s versatility, and makes tenoning operations as easy as can be.\u003c\/p\u003e\n\u003cp\u003eTooling capabilities are endless on the TW 55es thanks to the interchangeable, tilting spindle. Users can create angled cuts between 45° and 90° simply with a straight cutter, which also saves costs from needing to purchase expensive, specialized cutters. Custom and crown moldings are therefore a breeze to perform!\u003c\/p\u003e\n\u003cp\u003eThe Minimax TW 55es features a fence with reference pins for easy repositioning and numeric readouts for micrometric adjustment. It also comes with a miter gauge with flip-over stops for angled cuts and eccentric clamp. The flip-stops adjust along the fence for repeatable accuracy by creating easy to use reference points, while the eccentric clamp securely holds the workpiece in place.\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca rel=\"noopener\" title=\"SCM Minimax TW 55es Tilting Spindle Shaper - 1PH, 230V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/minimax-tw-55es-tilting-spindle-shaper\" target=\"_blank\"\u003e4.8HP, 1-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSpindle fence with reference pins for easy repositioning and numeric readouts for micrometric adjustment\u003c\/li\u003e\n\u003cli\u003eTenoning table and protection hood (275mm max. tool diameter)\u003c\/li\u003e\n\u003cli\u003eTilting spindle equipped with fixed handwheel w\/gravitational numerical readout\u003c\/li\u003e\n\u003cli\u003eInterchangeable 1.25\" spindle with reverse rotation\u003c\/li\u003e\n\u003cli\u003eExtruded anodized aluminum sliding table on high precision, hardened steel guideways\u003c\/li\u003e\n\u003cli\u003eElectric pre-setting for optional feeder\u003c\/li\u003e\n\u003cli\u003eAngular cutting device with two flip-over stops and eccentric clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle tilting range:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e45° to 90°\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eCapacity, under the nut, w\/interchangeable spindle:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e3.3\" (85mm)\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003eMax. useful spindle length: \u003c\/strong\u003e3.\u003cspan\u003e5\" (90 mm)\u003cbr\u003e\u003cstrong\u003eMax. useful spindle length (3\/4\" spindle):\u003c\/strong\u003e 2.75\" (70mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. tool diameter profiling:\u003c\/strong\u003e\u003cspan\u003e 8.25\" (210mm)\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eMax. tool diameter lowered under table at 90°:\u003c\/strong\u003e 9.44\" (240mm)\u003cbr\u003e\u003cstrong\u003eSliding table dimensions: \u003c\/strong\u003e\u003cspan\u003e47.2\" x 14.2\" (1,200 x 360 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSpindle moulder speeds: \u003c\/strong\u003e\u003cspan\u003e4,000\/7,000\/9,000\/12,000 RPM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eExhaust outlets dia.:\u003c\/strong\u003e\u003cspan\u003e 4.75\" (120 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. required dust collection:\u003c\/strong\u003e\u003cspan\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eGross weight: \u003c\/strong\u003e1,065 lbs.\u003cbr\u003e\u003cb\u003eMotor: \u003c\/b\u003e8HP\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V, 3-phase, 28 Amps\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Spindle, 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eShaper push handle\u003c\/li\u003e\n\u003cli\u003eSpare belts\u003c\/li\u003e\n\u003cli\u003eToolbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOptional Accessories\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e The following accessories are optional and \u003cstrong\u003enot included with the machine\u003c\/strong\u003e. They can be purchased at any time, but you can also take advantage of Accessory Bundle Pricing (applicable only at the time of machine purchase). Call us at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e for more information and to place your order!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional eccentric clamp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTenoning table and protection hood\u003c\/strong\u003e\u003cbr\u003e-275mm max. tool diameter with electrical limitation at 4,000 RPM. Available only with 1-1\/4\" spindle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle shaper protection\u003c\/strong\u003e\u003cbr\u003e-For spindle diameters 30mm, 35mm, 3\/4\", 1\", and 1-1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle shaper protection\u003c\/strong\u003e\u003cbr\u003e-For spindle diameters 40mm and 50mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnodized aluminum tables for spindle shaper fence\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle\u003c\/strong\u003e\u003cbr\u003e-Available in diameters of 30mm, 35mm, 40mm, 50mm, 3\/4\", 1\", and 1-1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle (125mm length)\u003c\/strong\u003e\u003cbr\u003e-Available in diameters of 30mm, 35mm, 40mm, 50mm, and 1-1\/4\" (\u003cstrong\u003e*Note:\u003c\/strong\u003e It is not possible to lower this spindle below the worktable. Therefore, it is necessary to remove it in order to clear the table.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpare spindle for router bits\u003c\/strong\u003e\u003cbr\u003e-Complete with a 1\/2\" clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupport frame (1,200 x 650mm)\u003c\/strong\u003e\u003cbr\u003e-Telescopic fence with 2 flip-over stops, eccentric clamp, and swinging arm support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwing away support for feeder\u003c\/strong\u003e\u003cbr\u003e-\u003cstrong\u003eNote:\u003c\/strong\u003e No electric pre-setting for feeder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeed 48 Power Feeder\u003c\/strong\u003e\u003cbr\u003e-220V, 3-phase, 4 rollers.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":40325675319495,"sku":"TW55es-3ph","price":12075.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/tw55esmain.jpg?v=1769696963"},{"product_id":"scm-class-tf-130ps","title":"SCM Class TF 130PS Fixed Spindle Shaper","description":"\u003cp\u003eThe Class TF 130PS is the workhorse of the SCM shaper line. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. An integrated sliding table further increases the flexibility of this machine. A mechanical digital reader ensures the precision of the spindle adjustment.\u003c\/p\u003e\n\u003cp\u003eMonoblock technology is used in the design and fabrication of this base . The solid, welded base undergoes a treatment call normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.\u003c\/p\u003e\n\u003cp\u003eOne thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles or using stacked tooling. SCM ensures maximum quality in its shapers by using very large spindle assemblies whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.\u003c\/p\u003e\n\u003cp\u003eThe Class TF 130PS has a 7” tool capacity under the nut. Coupled with the digital indicator for the spindle height, this makes the SCM shapers perfect for the use of stacked tooling. For example, many woodworkers use a tooling package consisting of three cutters for making cabinet doors. The stile, rail, and panel cutters are all mounted on the same spindle. By raising or lowering the spindle, it is possible to perform all three operations without changing the cutter or the spindle. The five speed spindle further increases tooling flexibility.\u003c\/p\u003e\n\u003cp\u003eThe Class TF 1 30PS has a unique integrated sliding table that is useful for tenoning and other small profile jobs. It is equipped with stops and hold-downs and can also be set at an angle.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSliding tenoning table with miter unit and clamps\u003c\/li\u003e\n\u003cli\u003e1.25\" interchangeable spindle\u003c\/li\u003e\n\u003cli\u003e5 spindle speeds from 3,000 to 10,000 RPM\u003c\/li\u003e\n\u003cli\u003eReverse rotation switch\u003c\/li\u003e\n\u003cli\u003e5 table insert rings\u003c\/li\u003e\n\u003cli\u003e7\" working spindle height below nut\u003c\/li\u003e\n\u003cli\u003eT Slot in table with miter gauge\u003c\/li\u003e\n\u003cli\u003eMechanical readout of spindle height\u003c\/li\u003e\n\u003cli\u003eFoot pedal control of mechanical brake and spindle lock\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eLow tension circuit \u003c\/li\u003e\n\u003cli\u003eTool kit with spare V-belt\u003c\/li\u003e\n\u003cli\u003eAluminum fences\u003c\/li\u003e\n\u003cli\u003eAdjustable fence and guard assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor Horsepower: \u003c\/strong\u003e11hp\u003cbr\u003e\u003cstrong\u003eTable Dimensions: \u003c\/strong\u003e42.5” X 29.9” (1,080 x 760 mm)\u003cbr\u003e\u003cstrong\u003eSliding Table Dimensions: \u003c\/strong\u003e42.5” x 10.6” (\u003cspan data-mce-fragment=\"1\"\u003e1,080 x 270 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSliding Table Stroke: \u003c\/strong\u003e39.25” (1,000 mm)\u003cbr\u003e\u003cstrong\u003eTable Height: \u003c\/strong\u003e36\" (920 mm)\u003cbr\u003e\u003cstrong\u003eWorking Height of Spindle (under the nut):\u003c\/strong\u003e 7” (180 mm)\u003cbr\u003e\u003cstrong\u003eMax. Insert Opening: \u003c\/strong\u003e12.6” (320 mm)\u003cbr\u003e\u003cstrong\u003eMax. Tool Dia.: \u003c\/strong\u003e9.8\" (250 mm)\u003cbr\u003e\u003cstrong\u003eSpindle Speeds (rpm):\u003c\/strong\u003e 3,000\/4,500\/6,000\/8,000\/10,000\u003cbr\u003e\u003cstrong\u003eDust Outlet on Fence and Rear Base: \u003c\/strong\u003e120 mm each\u003cbr\u003e\u003cstrong\u003eShipping Weight: \u003c\/strong\u003e1,866 lbs. (848kg)\u003cbr\u003e\u003cstrong\u003eNet Weight: \u003c\/strong\u003e1,650 lbs. (750kg)\u003cbr\u003e\u003cstrong\u003eElectrical Requirements: \u003c\/strong\u003e3-Phase @ 230 volts\u003cbr\u003e\u003cstrong\u003eDust Extraction: \u003c\/strong\u003e680 CFM x 2\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":40325697372359,"sku":"ClassTF130ps","price":17375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF130PSmain.jpg?v=1712176735"},{"product_id":"cantek-7-5hp-spindle-shaper-w-sliding-table-ss512csb","title":"Cantek SS512CSB 7.5HP Spindle Shaper w\/ Sliding Table","description":"\u003cp\u003e\u003cspan\u003eThe Cantek SS512CSB sliding table shaper is a ruggedly built sliding table shaper with refined features well suited for demanding production environments.  Its’ versatile design makes it the ideal shaping solution for edge-profiling, door \u0026amp; furniture components, mouldings, tenoning, and more.  The sliding table is cast iron and runs on bearings for smooth and vibration free movement. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles.  The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a quote, we would be happy to provide one. Call 260-637-0054 or email sales@oaktreesupplies.com\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron sliding table runs on bearings for vibration free and smooth movement\u003c\/li\u003e\n\u003cli\u003e1-1\/4” interchangeable spindle is standard (other sizes available)\u003c\/li\u003e\n\u003cli\u003eLarge cast-iron table is ground and polished for maximum stability and durability\u003c\/li\u003e\n\u003cli\u003ePowerful 7.5 HP motor for even the most demanding profiling work\u003c\/li\u003e\n\u003cli\u003eFive spindle speeds can be easily adjusted to suit your tool diameter\u003c\/li\u003e\n\u003cli\u003eElectronic spindle brake for added safety and facilitates with fast changeover\u003c\/li\u003e\n\u003cli\u003ePrecision fence assembly with micro infeed and outfeed fence adjustment\u003c\/li\u003e\n\u003cli\u003eFinger style fence allows fence to be adjusted around the cutter for added safety and workpiece stability\u003c\/li\u003e\n\u003cli\u003eCast iron ground \u0026amp; polished table with insert rings \u0026amp; t-slot for mitre \/ tenoning jig\u003c\/li\u003e\n\u003cli\u003ePrecision ground and electronically balanced spindle\u003c\/li\u003e\n\u003cli\u003eV-belt drive with (5) spindle speeds is easily accessed from the front of the machine (3\/4\/6\/8\/1000 RPM)\u003c\/li\u003e\n\u003cli\u003eElectric spindle brake for added safety\u003c\/li\u003e\n\u003cli\u003eSpindle lock – with limit switch safety, machine will not start with lock engaged\u003c\/li\u003e\n\u003cli\u003eMicro spindle height adjustment with dial indicator for precise height adjustment\u003c\/li\u003e\n\u003cli\u003e1 ¼” Interchangeable cutter spindle is standard\u003c\/li\u003e\n\u003cli\u003eForward\/reverse spindle rotation\u003c\/li\u003e\n\u003cli\u003eAdjustable “finger” type fence\u003c\/li\u003e\n\u003cli\u003eIndependent micro-fence adjustment on both sides\u003c\/li\u003e\n\u003cli\u003ePlug to accept Cantek Power Feeder and table is pre-drilled for mounding feeder base\u003c\/li\u003e\n\u003cli\u003eIncludes the following standard equipment:\n\u003cul\u003e\n\u003cli\u003e1 ¼” spindle\u003c\/li\u003e\n\u003cli\u003e(1) 5” dust chute on guard \u0026amp; (1) 4” dust chute in the table\u003c\/li\u003e\n\u003cli\u003eSafety guard\u003c\/li\u003e\n\u003cli\u003eMitre tenoning jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 31-1\/2” x 39″\u003cbr\u003e\u003cstrong\u003eSpindle speeds (5):\u003c\/strong\u003e 3000\/4000\/6000\/8000\/10000 RPM\u003cbr\u003e\u003cstrong\u003eSpindle taper:\u003c\/strong\u003e 5 MT\u003cbr\u003e\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e 1-1\/4”\u003cbr\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5 HP\u003cbr\u003e\u003cstrong\u003eSliding table dimensions:\u003c\/strong\u003e 39” x 10-1\/4”\u003cbr\u003e\u003cstrong\u003eSliding table stroke:\u003c\/strong\u003e 37”\u003cbr\u003e\u003cstrong\u003eLargest diameter of cutter:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAbove table:\u003c\/strong\u003e 8-1\/4”\u003cbr\u003e\u003cstrong\u003eBelow table:\u003c\/strong\u003e 13-1\/4”\u003cbr\u003e\u003cstrong\u003eFence size:\u003c\/strong\u003e 6″ x 43″\u003cbr\u003e\u003cstrong\u003eVertical spindle stroke:\u003c\/strong\u003e 7”\u003cbr\u003e\u003cstrong\u003eUseable length of spindle:\u003c\/strong\u003e 5-1\/2” long\u003cbr\u003e\u003cstrong\u003eDust port:\u003c\/strong\u003e (1) 5″ on guard, (1) 4” in table\u003cbr\u003e\u003cstrong\u003eTotal HP:\u003c\/strong\u003e 7.5 HP\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1034 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 48.4″ x 39.4″ x 52-3\/4”\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1166 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 45-1\/4” x 37″ x 41″\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40965737316551,"sku":"SS512CSB","price":11970.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/SS512CSB-1.jpg?v=1680025418"},{"product_id":"cantek-overarm-router-sr750","title":"Cantek SR750 Overarm Router","description":"\u003cp\u003e\u003cspan\u003eThe Cantek SR750 Pneumatic Overarm Pin Router is the ideal solution for high volume routing and profiling of repetitive shapes.  With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease.  Simply follow your profile with one of the guide pins included (1\/4”, 3\/8”, 1\/2”) for fast and convenient routing operation.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe machine is constructed with a solid welded steel frame and cast-iron tilting table.  The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”.  Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a quote, we would be happy to provide one. Call 260-637-0054 or email sales@oaktreesupplies.com\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Constructed Spindle Assembly:\u003c\/strong\u003e The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Position Depth Stops:\u003c\/strong\u003e A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3\/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication:\u003c\/strong\u003e Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Table:\u003c\/strong\u003e The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive Belt:\u003c\/strong\u003e Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.\u003c\/li\u003e\n\u003cli\u003eCollets Included – Double taper type: 1\/4″ 3\/8″, 1\/2″, 5\/8″. Metric sizes available as an option: 6, 9, 12mm\u003c\/li\u003e\n\u003cli\u003eGuide Pins Included: 1\/4″, 3\/8″, 1\/2″\u003c\/li\u003e\n\u003cli\u003e7.5HP Spindle Motor with magnetic switch\u003c\/li\u003e\n\u003cli\u003eDust cleaning air gun\u003c\/li\u003e\n\u003cli\u003eBrush ring shroud\u003c\/li\u003e\n\u003cli\u003eFence for straight routing\u003c\/li\u003e\n\u003cli\u003eDust Hood: 3″ diameter outlet\u003c\/li\u003e\n\u003cli\u003eGrease: One bottle spread, recommended grade SUN-742EP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eChuck to table top maximum:\u003c\/strong\u003e 11″ (280 mm)\u003cbr\u003e\u003cstrong\u003eThroat clearance:\u003c\/strong\u003e 29-1\/2″ (750 mm)\u003cbr\u003e\u003cstrong\u003eSpindle speeds (2 speeds):\u003c\/strong\u003e 10,000 \/ 20,000 RPM\u003cbr\u003e\u003cstrong\u003eSpindle travel:\u003c\/strong\u003e 3-3\/4″ (95 mm)\u003cbr\u003e\u003cstrong\u003eDepth stops:\u003c\/strong\u003e 3 Position turret stops, adjustable\u003cbr\u003e\u003cstrong\u003eTable travel:\u003c\/strong\u003e 7-1\/2″ (190 mm)\u003cbr\u003e\u003cstrong\u003eTable surface area:\u003c\/strong\u003e 36″ x 40″ (915 x 1,016 mm)\u003cbr\u003e\u003cstrong\u003eTable tilt:\u003c\/strong\u003e Front downward to 45°\u003cbr\u003e\u003cstrong\u003eMicrometric table raise:\u003c\/strong\u003e 3\/64″(1 mm) per revolution of handwheel\u003cbr\u003e\u003cstrong\u003eCollet sizes:\u003c\/strong\u003e 1\/4″ 3\/8″ 1\/2″ 5\/8″\u003cbr\u003e\u003cstrong\u003eSpindle drive motor:\u003c\/strong\u003e 7.5HP\u003cbr\u003e\u003cstrong\u003eBelt size:\u003c\/strong\u003e 35 x 2,330 mm\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 720kgs (1,590 lbs.)\u003cbr\u003e\u003cstrong\u003eGross weight:\u003c\/strong\u003e 900kgs (1,990 lbs.)\u003cbr\u003e\u003cstrong\u003ePacking dimensions:\u003c\/strong\u003e 66″ x 44″ x 72″ (L x W x H)\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966335758535,"sku":"SR750","price":15120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/SR750-1.jpg?v=1680025046"},{"product_id":"cantek-7-5-hp-spindle-shaper-w-tilting-spindle-ss512tb","title":"Cantek SS512TB 7.5 HP Spindle Shaper w\/ Tilting Spindle","description":"\u003cp\u003e\u003cspan\u003eThe Cantek SS512TB tilting spindle shaper is a ruggedly built shaper with refined features well suited for demanding production environments.  Its’ versatile design makes it the ideal shaping solution for edge-profiling, door \u0026amp; furniture components, mouldings, tenoning, and more.  The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles.  The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a quote, we would be happy to provide one. Call 260-637-0054 or email sales@oaktreesupplies.com\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTilting spindle from -5° to +45°\u003c\/li\u003e\n\u003cli\u003e1-1\/4” interchangeable spindle is standard (other sizes available)\u003c\/li\u003e\n\u003cli\u003eLarge cast-iron table is ground and polished for maximum stability and durability\u003c\/li\u003e\n\u003cli\u003ePowerful 7.5 HP motor for even the most demanding profiling work\u003c\/li\u003e\n\u003cli\u003eFive spindle speeds can be easily adjusted to suit your tool diameter\u003c\/li\u003e\n\u003cli\u003eElectronic spindle brake for added safety and facilitates with fast changeover\u003c\/li\u003e\n\u003cli\u003ePrecision fence assembly with micro infeed and outfeed fence adjustment\u003c\/li\u003e\n\u003cli\u003eFinger style fence allows fence to be adjusted around the cutter for added safety and workpiece stability\u003c\/li\u003e\n\u003cli\u003eCast iron ground \u0026amp; polished table with insert rings \u0026amp; t-slot for mitre \/ tenoning jig\u003c\/li\u003e\n\u003cli\u003ePrecision ground and electronically balanced spindle\u003c\/li\u003e\n\u003cli\u003eV-belt drive with (5) spindle speeds is easily accessed from the front of the machine (3\/4\/6\/8\/1000 RPM)\u003c\/li\u003e\n\u003cli\u003eElectric spindle brake for added safety\u003c\/li\u003e\n\u003cli\u003eSpindle lock – with limit switch safety, machine will not start with lock engaged\u003c\/li\u003e\n\u003cli\u003eMicro spindle height adjustment with dial indicator for precise height adjustment\u003c\/li\u003e\n\u003cli\u003e1-1\/4” Interchangeable cutter spindle is standard\u003c\/li\u003e\n\u003cli\u003eForward\/reverse spindle rotation\u003c\/li\u003e\n\u003cli\u003eAdjustable “finger” type fence\u003c\/li\u003e\n\u003cli\u003eIndependent micro-fence adjustment on both sides\u003c\/li\u003e\n\u003cli\u003ePlug to accept Cantek Power Feeder and table is pre-drilled for mounding feeder base\u003c\/li\u003e\n\u003cli\u003eIncludes the following standard equipment:\n\u003cul\u003e\n\u003cli\u003e1-1\/4” spindle\u003c\/li\u003e\n\u003cli\u003e(1) 5” dust chute on guard \u0026amp; (1) 4” dust chute in the table\u003c\/li\u003e\n\u003cli\u003eSafety guard\u003c\/li\u003e\n\u003cli\u003eMitre tenoning jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 31-1\/2” x 39.4″\u003cbr\u003e\u003cstrong\u003eTilting spindle:\u003c\/strong\u003e -5° to +45°\u003cbr\u003e\u003cstrong\u003eSpindle speeds (5):\u003c\/strong\u003e 3,000\/4,000\/6,000\/8,000\/10,000 RPM\u003cbr\u003e\u003cstrong\u003eSpindle taper:\u003c\/strong\u003e 5 MT\u003cbr\u003e\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e 1-1\/4”\u003cbr\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5 HP\u003cbr\u003e\u003cem\u003eLargest diameter of cutter\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003eAbove table:\u003c\/strong\u003e 8-1\/4”\u003cbr\u003e\u003cstrong\u003eBelow table:\u003c\/strong\u003e 13-1\/4”\u003cbr\u003e\u003cstrong\u003eFence size:\u003c\/strong\u003e 6″ x 43″\u003cbr\u003e\u003cstrong\u003eVertical spindle stroke:\u003c\/strong\u003e 7″\u003cbr\u003e\u003cstrong\u003eUseable length of spindle:\u003c\/strong\u003e 5-1\/2” long\u003cbr\u003e\u003cstrong\u003eDust port:\u003c\/strong\u003e (1) 5″ on guard, (1) 4” in table\u003cbr\u003e\u003cstrong\u003eTotal HP:\u003c\/strong\u003e 7.5 HP\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,034 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 48.4″ x 39.4″ x 52-3\/4”\u003cbr\u003e\u003cstrong\u003eShipping weight: \u003c\/strong\u003e1,166 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 45-1\/4” x 37″ x 41″\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966385893575,"sku":"SS512TB","price":13230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/SS512TB-1.jpg?v=1679751747"},{"product_id":"scm-class-ti-120-tilting-spindle-shaper","title":"SCM Class TI 120 Tilting Spindle Shaper","description":"\u003cp\u003eThe Class TI 120 is a robust, manual tilting spindle shaper built for production shops. The tilting spindle allows craftsmen to use more creativity in designing high-end, custom products when shaping or routing. Both the spindle and the fence are set manually via the handwheels accessible on the front of the machine. With an interchangeable MK 4 spindle, the Class TI 120 is a versatile powerhouse.\u003c\/p\u003e\n\u003cp\u003eA standard feature on the Class TI 120 is the MK 4 interchangeable spindle. This feature allows the use of different spindles for various tooling with different diameters. An upgrade to a larger shaper does not mean that all tooling needs to be replaced. Special tools can continue to be used simply by changing out to a different spindle. A 1-1\/4\" spindle comes standard. You also receive a spare 1-1\/4\" spindle.\u003c\/p\u003e\n\u003cp\u003eThe Class TI 120 comes standard with a large shaper hood with memory pins. If removed, the hood will go right back into the same position, so it is accurate and repeatable. The fences are adjusted by means of a mechanical hand crank that features a digital (mechanical) readout of the fence positioning. This convenient feature makes it simple to set up the hood for a number of different profiles and operations.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLarge spindle column made entirely of cast-iron\u003c\/li\u003e\n\u003cli\u003eSpindle is encased by cast-iron \"cup\" to protect internal components from shavings and sawdust\u003c\/li\u003e\n\u003cli\u003eMK4 interchangeable spindle\u003c\/li\u003e\n\u003cli\u003eFence and spindle adjustment is easy thanks to handwheels with mechanical readouts on the front of the machine\u003c\/li\u003e\n\u003cli\u003e5 speeds: 3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000 RPM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAluminum fence with connecting bars between the two tables\u003c\/li\u003e\n\u003cli\u003e11HP motor with automatic star-delta start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable dimensions:\u003c\/strong\u003e 47.19\" x 31.87\" (1,200 x 810mm)\u003cbr\u003e\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. useful spindle length:\u003c\/strong\u003e 7.06\" (180mm)\u003cbr\u003e\u003cstrong\u003eTilt angle:\u003c\/strong\u003e 45° \/ +45°\u003cbr\u003e\u003cstrong\u003eNo. 4 Morse Tape Spindle Mount:\u003c\/strong\u003e MK4\u003cbr\u003e\u003cstrong\u003eMax. tool dia. retractable under table:\u003c\/strong\u003e 12.56\" x 2.31\" (320 x 60mm)\u003cbr\u003e\u003cstrong\u003e5 Spindle speeds (RPM):\u003c\/strong\u003e 3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000\u003cbr\u003e\u003cstrong\u003eDust outlet diameter (hood):\u003c\/strong\u003e 4.69\" (120mm)\u003cbr\u003e\u003cstrong\u003eDust outlet diameter (base): \u003c\/strong\u003e2x 3.12\" (80mm)\u003cbr\u003e\u003cb\u003eMin. required dust collection: \u003c\/b\u003e900 CFM\u003cbr\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 11HP (8 kW)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V, 3-phase, 26 Amps\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMK4 Spindle 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eToolbox and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eOptional Accessories\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e The following accessories are optional and \u003cstrong\u003enot included with the machine\u003c\/strong\u003e. They can be purchased at any time, but you can also take advantage of Accessory Bundle Pricing (applicable only at the time of machine purchase). Call us at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e for more information and to place your order!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"LL\" Version for profiling\u003c\/strong\u003e\u003cbr\u003e-Includes (2) cast-iron worktable side extensions that are 2,500mm long, a front support bar to handle large workpieces, and an emergency push button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarriage on fix table\u003c\/strong\u003e\u003cbr\u003e-For small tenoning operations. 60° swiveling fence complete with mobile stops, telescopic extension, and eccentric clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional spindle (for MK4 interchangeable spindle)\u003c\/strong\u003e\u003cbr\u003e-Includes the \"T-SET\" rapid tool locking preset.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMK4 right tool taper with ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMK4 left tool taper with ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeed 48 Power Feeder\u003c\/strong\u003e\u003cbr\u003e-4 rollers, 220V, 3-phase\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43783870283993,"sku":"ClassTI120","price":17975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TI120-1.jpg?v=1773773360"},{"product_id":"scm-class-tf-130e-fixed-spindle-shaper-with-flex-fence","title":"SCM Class TF 130E Fixed Spindle Shaper","description":"\u003cp\u003e\u003cspan\u003eA must for the serious woodworker, the Class TF 130E is the SCM shaper that combines quality and value for your investment. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. The TF 130E features powered lifting with digital readouts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMonoblock technology is used in the design and fabrication of this base. The solid, welded base undergoes a treatment called normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.\u003c\/p\u003e\n\u003cp\u003eOne thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles or using stacked tooling. SCM ensures maximum quality in its shapers by using very large spindle assemblies whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.\u003c\/p\u003e\n\u003cp\u003eA standard feature on the Class TF 130E is the MK 5 interchangeable tapered spindle. This feature allows the use of different spindles for various tooling with different spindle diameters. An upgrade to a larger shaper does not mean that all tooling needs to be replaced. Special tools can continue to be used simply by changing out to a different spindle. A 1-1\/4” spindle comes standard.\u003c\/p\u003e\n\u003cp\u003eThe Class TF 130 comes standard with a large shaper hood with memory pins. If removed, the hood will go right back into the same position, so it is accurate and repeatable. The fences are adjusted by means of a mechanical hand crank that features a digital (mechanical) readout of the fence positioning. This convenient feature makes it simple to set up the hood for a number of different profiles and operations.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePowered tool-holder shaft lifting, complete with electronic digital readout of working height\u003c\/li\u003e\n\u003cli\u003eSpindle moulder fence with mechanical adjustment\u003c\/li\u003e\n\u003cli\u003eSpindle moulder fence with continuous linear adjustment by handwheels accessible from machine front:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e*adjustment of entire fence in respect of tool diam.\u003c\/li\u003e\n\u003cli\u003e*adjustment of entry fence for thick removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMechanical readout for the adjustment\u003c\/li\u003e\n\u003cli\u003eWooden tables and connecting bars\u003c\/li\u003e\n\u003cli\u003e250 mm max. tool diameter\u003c\/li\u003e\n\u003cli\u003e\"FAST\" section table replacing the table rings to optimize the working support under the cutting tool, with\u003c\/li\u003e\n\u003cli\u003emanual external adjustment\u003c\/li\u003e\n\u003cli\u003e3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10000 RPM spindle speeds\u003c\/li\u003e\n\u003cli\u003eElectric speed display dial (CE and electrical protections versions)\u003c\/li\u003e\n\u003cli\u003eElectrical presetting for feeder (CE version)\u003c\/li\u003e\n\u003cli\u003eReverse spindle rotation with electrical interlocking for reverse operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 11hp (8 kW)\u003cstrong\u003e\u003cbr\u003eWork table dimensions:\u003c\/strong\u003e 47.19\" x 28.69\" (1,200 x 730mm)\u003cbr\u003e\u003cstrong\u003eWorking length of spindle:\u003c\/strong\u003e 7\" (180mm)\u003cbr\u003e\u003cstrong\u003eSpindle base projection:\u003c\/strong\u003e 3.56\" (92mm)\u003cbr\u003e\u003cstrong\u003eMax. tool dia. retractable (under table):\u003c\/strong\u003e 11.75\" x 3.31\" (300 x 85mm)\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 4.69\" (120mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V, 3-phase, 25 A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43783877886169,"sku":"ClassTF130E","price":26475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/tf130emain.jpg?v=1712173907"},{"product_id":"scm-nova-tf-110-fixed-spindle-shaper","title":"SCM Nova TF 110 Fixed Spindle Shaper","description":"\u003cp\u003eA must-have for custom cabinet and furniture shops, the Nova TF 110 is a shaper that combines quality and value for your investment. It has a very robust structure and all the controls can be accessed on the front of the machine for easy use. A mechanical digital reader ensures the precision of the spindle adjustment.\u003c\/p\u003e\n\u003cp\u003eThe base is fabricated with Monoblock technology. The solid, welded base undergoes a treatment called normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.\u003c\/p\u003e\n\u003cp\u003eOne thing that can degrade the quality of finish from a shaper is the vibration transmitted from the spindle to the cutter. Minimizing vibration is even more critical when cutting tall profiles using stacked tooling. SCM ensures maximum quality in its shapers by using very large spindle assemblies whereby the increased mass of the spindle absorbs vibrations and eliminates whipping action at the top of the spindle.\u003c\/p\u003e\n\u003cp\u003eThe Nova TF 110 has a healthy 5.5” tool capacity under the nut. Coupled with the digital indicator for the spindle height, this makes it perfect for the use of stacked tooling. For example, many woodworkers use a tooling package consisting of three cutters for making cabinet doors. The stile, rail, and panel cutters are all mounted on the same spindle.\u003c\/p\u003e\n\u003cp\u003eBy raising or lowering the spindle, it is possible to perform all three operations without changing the cutter or the spindle. The five speed spindle further increases tooling flexibility. The Nova TF 110 features a large shaper hood with memory pins which make its placement repeatable. Both the infeed and outfeed fences are adjustable from the rear of the machine, and the increments are measurable via a scale next to the positioning knob.\u003c\/p\u003e\n\u003cp\u003eA standard feature on the Nova TF 110 is the MK4 interchangeable spindle. This feature allows the use of different spindles for various tooling with different spindle diameters. An upgrade to a larger shaper does not mean that all tooling needs to be replaced. Special tools can continue to be used simply by changing out to a different spindle. A 1-1\/4\" spindle comes standard.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1-1\/4” interchangeable spindle\u003c\/li\u003e\n\u003cli\u003e“T” Slot in the table w\/ Miter Gauge\u003c\/li\u003e\n\u003cli\u003e5 Spindle speeds from 3,000 to 10,000 RPM\u003c\/li\u003e\n\u003cli\u003eReverse rotation switch\u003c\/li\u003e\n\u003cli\u003e5.5” Below the nut\u003c\/li\u003e\n\u003cli\u003e5 Table insert rings\u003c\/li\u003e\n\u003cli\u003eMechanical readout of spindle height\u003c\/li\u003e\n\u003cli\u003eFoot Pedal Controls for mechanical brake and spindle lock\u003c\/li\u003e\n\u003cli\u003eMagnetic starter with overload protection\u003c\/li\u003e\n\u003cli\u003eLow tension circuit (110v by transformer)\u003c\/li\u003e\n\u003cli\u003eTool kit with spare V-belt\u003c\/li\u003e\n\u003cli\u003eAluminum fences\u003c\/li\u003e\n\u003cli\u003eAdjustable fence and guard assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor Horsepower: \u003c\/strong\u003e8HP\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eTable Dimensions: \u003c\/strong\u003e47\" x 28.8\" (1,200 x 730mm)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eTable Height: \u003c\/strong\u003e36\" (920mm)\u003cstrong\u003e\u003cbr\u003eDust Outlet on Fence and Rear: \u003c\/strong\u003e120mm each\u003cstrong\u003e\u003cbr\u003eOverall Dimensions (L x W x H): \u003c\/strong\u003e47” x 39.1” x 40.7”\u003cstrong\u003e\u003cbr\u003eShipping Weight: \u003c\/strong\u003e1,206 lbs. (548 kg)\u003cstrong\u003e\u003cbr\u003eNet Weight: \u003c\/strong\u003e1,047 lbs. (475 kg)\u003cstrong\u003e\u003cbr\u003eDust Extraction: \u003c\/strong\u003e680 cfm x 2\u003cstrong\u003e\u003cbr\u003eWorking Height of Spindle (under the nut):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eNo 4. Morse Taper Spindle Mount\u003cbr\u003e\u003c\/em\u003e\u003cstrong\u003eMax. Insert Opening: \u003c\/strong\u003e320 mm\u003cbr\u003e\u003cstrong\u003eMax. Tool Dia.: \u003c\/strong\u003e250 mm\u003cbr\u003e\u003cstrong\u003eSpindle Speeds: \u003c\/strong\u003e3,000 \/ 4,500 \/ 6,000 \/ 7,000 \/ 10,000 RPM\u003cbr\u003e\u003cstrong\u003e*Electrical Requirements: \u003c\/strong\u003e220V, 3-phase, 21 Amps\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43783883129049,"sku":"NovaTF110","price":11375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/NovaTF110-1.jpg?v=1677099879"},{"product_id":"laguna-pro-shaper-7-5hp-220v-3-ph","title":"Laguna Pro Shaper 7.5hp, 3PH, 220V","description":"\u003cp\u003eThe Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. For starters, the table measures an impressive 31\" x 39\" and is predrilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1\/16 adjustment to the fence.\u003c\/p\u003e\n\u003cp\u003eInside you will find a heavy-duty 7.5 HP 220 volt three-phase motor. It offers 3 speeds with a unique quick change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The Pro Shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel.\u003c\/p\u003e\n\u003cp\u003eThe fit and finish on this machine are top notch and even includes a wheel kit built right into the base.  The Laguna Pro Shaper is designed to give you years of trouble-free performance without breaking the bank.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title=\"Laguna Pro Shaper 5hp, 1PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-pro-shaper-5hp-1ph-220v\" target=\"_blank\"\u003e5hp \u0026amp; 1-phase\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty precision fence\u003c\/li\u003e\n\u003cli\u003eRack and pinion macro adjustment\u003c\/li\u003e\n\u003cli\u003eQuick-release belt change\u003c\/li\u003e\n\u003cli\u003e6 step spindle exchange\u003c\/li\u003e\n\u003cli\u003eDual dust ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 7 1\/2 HP 3 Phase 220\/440V 60 HZ Prewired 220V 3 Phase \u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTable size:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 39-5\/16\" x 31-7\/16\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e x 3-1\/2\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpindle travel:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpindle Sizes:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 3\/4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e and 1-1\/4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCapacity Under Nut:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 6 (for 1-1\/4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e ) \u0026amp; 4 (for 3\/4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e ) \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRouter Collets:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 1\/4\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e and 1\/2\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpindle speeds:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 5,000 \/ 7,000 \/ 10,000 RPM \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTable Opening Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 7-5\/16\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\"\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDigital Readout:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Standard \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDirection:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Forward\/Reversing Switch \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFence:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Micro Adjustment \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWeight (Net\/Ship):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 640\/720 lbs.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/j_ut61PucTo\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":43905834811609,"sku":"MSHAP5030-0130","price":5599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MSHAP5010-0130-1_84ab3faf-0e37-4874-8aed-573ca3e959c1.jpg?v=1709070494"},{"product_id":"laguna-industrial-s-45t-shaper-7-5hp-3ph","title":"Laguna Industrial S|45T Shaper 7.5hp, 3PH, 220V","description":"\u003cp\u003eThe Laguna S|45T Industrial Shaper was designed to be a heavy duty industrial workhorse for commercial applications. Weighing in at over 1000 lbs. it provides an exceptional value for any pro shop. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe combination of a dynamic electronically balanced spindle with robust solid castings makes the S45T run extremely smooth with absolute minimum vibration. The versatile 45° backward \u0026amp; 10° forward tilting spindle makes using a feeder much easier \u0026amp; keeps the cutting action close to the cast table rather than shaping from the top. Oversized cast table pre-drilled to accept most feeders \u0026amp; featuring sliding table with tenoning as standard. Complete with table \u0026amp; hold down clamp.\u003c\/p\u003e\n\u003cp\u003eThe sliding table has a full 30” stroke from miter fence to the center of the spindle. Miter gauge adjusts +\/- 45° The interchangeable spindle comes standard as 1-1\/4”, but other sizes including router collets are available. The fence is made from heavy cast iron \u0026amp; easily adjusts w micro-adjusters for both in\/outfeed. LED lights display the desired RPM. The S45T is available in both the 1 phase \u0026amp; 3 phase. Other voltages are also available upon request.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca rel=\"noopener noreferrer\" title=\"Laguna Industrial S|45T Shaper 5hp, 1PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-industrial-s-45t-shaper-5hp-1ph-220v\" target=\"_blank\"\u003e5hp, 1 Phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5hp, 3 phase, 220 Volt, 60 Hz. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSpindle Tilt:\u003c\/strong\u003e 45° Backwards, 10° Forward \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSliding Table:\u003c\/strong\u003e 10-1\/4” X 39” \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 18-3\/4” \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eMain Table Incl. S\/T:\u003c\/strong\u003e 39-1\/2” X 31-5\/8” \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTenoning Table:\u003c\/strong\u003e 13-3\/4 X 18-1\/2” \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eHold Down Clamp:\u003c\/strong\u003e Included \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTenoning Table Adjustment:\u003c\/strong\u003e 7” Slide to Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 19” Right of Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSliding Table Stroke:\u003c\/strong\u003e 19” Left of Spindle \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSliding Table Far Right:\u003c\/strong\u003e 30” Spindle to Miter Gauge \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eTable Height:\u003c\/strong\u003e 35 3\/8” \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eCapacity Under Nut:\u003c\/strong\u003e 5”\/125 MM \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSpindle Stroke:\u003c\/strong\u003e 7”\/180 MM \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSpindle:\u003c\/strong\u003e 1 ¼” Interchangeable \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eMax. Tooling Diameter:\u003c\/strong\u003e 8-1\/4”\/210 MM Under Table \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eMax Tooling Diameter:\u003c\/strong\u003e 13” \/335 MM Above Table \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRotation:\u003c\/strong\u003e Forward\/Reverse \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e Micro-adjust, Cast Body \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 3,000\/4,000\/6,000\/8,000\/10,000 RPM \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eReadout:\u003c\/strong\u003e LED Lights for speeds\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eReadout:\u003c\/strong\u003e Mechanical Tilt \u0026amp; Spindle Height \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eFeeder:\u003c\/strong\u003e Pre-drilled Left Back Corner \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eRouter Collet:\u003c\/strong\u003e Accepts, Not Included \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWeight, Net\/Ship:\u003c\/strong\u003e 1,056\/1,350 Lbs.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2GsNwX_rzXA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":43977550528729,"sku":"MSHAPS45T-7.5-0167","price":12999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/S45T-1_bab8b63c-9dc8-445e-b19c-4ab0c0096101.jpg?v=1688579335"},{"product_id":"powermatic-pm2700-shaper-5hp-3ph-230-460v","title":"Powermatic PM2700 Shaper 5hp, 3PH, 230\/460V","description":"\u003cp\u003ePowermatic PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes.\u003c\/p\u003e\n\u003cp\u003eThe extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDigital readout gives the use exact spindle height and allows for .001\" adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003c\/li\u003e\n\u003cli\u003eHeavy duty cast iron base\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" and 1-1\/4\" spindles\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable fence sides\u003c\/li\u003e\n\u003cli\u003eIntegrated casters can be raised and lowered to mobilize shaper\u003c\/li\u003e\n\u003cli\u003eMicro adjust control knobs allow for precision adjustment for the fence\u003c\/li\u003e\n\u003cli\u003eSuperior clear cutter guard promotes safety, allows observation of the entire cut\u003c\/li\u003e\n\u003cli\u003eTable predrilled and tapped for feeder mounting in two locations\u003c\/li\u003e\n\u003cli\u003eTwo speed reversible spindle speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":44281556533465,"sku":"PM9-1280102C","price":5719.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/1280100C-1_d2f6a7f1-ce35-4135-8f40-f78c21a1cd18.jpg?v=1748888289"},{"product_id":"powermatic-pm2700-shaper-3hp-1-ph-230v","title":"Powermatic PM2700 Shaper 3hp, 1 PH, 230V","description":"\u003cp\u003ePowermatic PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30\" x 40\" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes.\u003c\/p\u003e\n\u003cp\u003eThe extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001\" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDigital readout gives the use exact spindle height and allows for .001\" adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy duty 30\" x 40\" precision ground tabletop for smooth stock feeding\u003c\/li\u003e\n\u003cli\u003eHeavy duty cast iron base\u003c\/li\u003e\n\u003cli\u003eIncludes 3\/4\" and 1-1\/4\" spindles\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable fence sides\u003c\/li\u003e\n\u003cli\u003eIntegrated casters can be raised and lowered to mobilize shaper\u003c\/li\u003e\n\u003cli\u003eMicro adjust control knobs allow for precision adjustment for the fence\u003c\/li\u003e\n\u003cli\u003eSuperior clear cutter guard promotes safety, allows observation of the entire cut\u003c\/li\u003e\n\u003cli\u003eTable predrilled and tapped for feeder mounting in two locations\u003c\/li\u003e\n\u003cli\u003eTwo speed reversible spindle speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMaximum Spindle Diameter:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 4\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":44281557287129,"sku":"PM9-1280100C","price":5499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/1280100C-1_73c9d528-6a53-4ff1-b598-84eec0b23931.jpg?v=1748888288"},{"product_id":"jet-jws-20cs-20-spindle-shaper-1-5hp-1-ph-115-230v","title":"JET JWS-20CS 20\" Spindle Shaper 1.5hp, 1-PH, 115\/230V","description":"\u003cp\u003eIf you're looking for a space-saving shaper for your shop, the JET JWS-20CS is what you need. This compact powerhouse features an 8,000 and 10,000 RPM reversing 1.5hp motor. The sleek 18\" x 20\" precision-ground cast iron table provides a durable work area for various projects. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independent left and right fences feature micro-adjustment, and a built-in 4\" dust port.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 1.5hp motor delivers dependable power, even on heavy jobs\u003c\/li\u003e\n\u003cli\u003eIndependent left and right fences feature micro-adjustment and have zero-clearance capability\u003c\/li\u003e\n\u003cli\u003eFully enclosed, heavy-duty steel stand has a removable cover for easy motor access\u003c\/li\u003e\n\u003cli\u003eForward\/reverse switch for left and right hand operation\u003c\/li\u003e\n\u003cli\u003eExtra-large handwheel is conveniently located for easy spindle height adjustments\u003c\/li\u003e\n\u003cli\u003e1\/2\" and 3\/4\" interchangeable spindles and router bit collets for use with shaper cutter\u003c\/li\u003e\n\u003cli\u003eTwo adjustable hold-downs to secure your work while shaping\u003c\/li\u003e\n\u003cli\u003eTwo reversible spindle speeds lets you select the best speed and torque for different cutter diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor: \u003c\/strong\u003e1.5hp, 1-phase, 115\/230V\u003cbr\u003e\u003cstrong\u003ePre-wired: \u003c\/strong\u003e115V\u003cbr\u003e\u003cstrong\u003eCutterhead speed (reversible): \u003c\/strong\u003e8,000 \u0026amp; 10,000 RPM\u003cbr\u003e\u003cstrong\u003eTable size (L x W): \u003c\/strong\u003e18\" x 20\"\u003cbr\u003e\u003cstrong\u003eTable slot: \u003c\/strong\u003e3\/4\" x 3\/8\" T-slot\u003cbr\u003e\u003cstrong\u003eTable opening diameter: \u003c\/strong\u003e5-3\/16\"\u003cbr\u003e\u003cstrong\u003eInsert opening diameter:\u003c\/strong\u003e 1-5\/8\" and 3\"\u003cbr\u003e\u003cstrong\u003eFence size (2): \u003c\/strong\u003e10\" x 3\"\u003cbr\u003e\u003cstrong\u003eSpindle capacity:\u003c\/strong\u003e 1\/2\" and 3\/4\"\u003cbr\u003e\u003cstrong\u003eRouter bit collet capacity:\u003c\/strong\u003e 1\/4\" and 1\/2\"\u003cbr\u003e\u003cstrong\u003eSpindle travel: \u003c\/strong\u003e2\"\u003cbr\u003e\u003cstrong\u003eTable height:\u003c\/strong\u003e 33-1\/2\"\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 18\" x 20\" x 42\"\u003cbr\u003e\u003cstrong\u003eMin. dust collection:\u003c\/strong\u003e 300 CFM\u003cbr\u003e\u003cstrong\u003eDust port diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 198 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dust Chute\u003c\/li\u003e\n\u003cli\u003e(1) Miter Gauge\u003c\/li\u003e\n\u003cli\u003e(1) Draw Bar \u0026amp; Nut\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" Spindle Assembly\u003c\/li\u003e\n\u003cli\u003e(1) 3\/4\" Spindle Assembly\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Router Collet\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" Router Collet\u003c\/li\u003e\n\u003cli\u003e(1) Arbor Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 3mm Hex Key Wrench\u003c\/li\u003e\n\u003cli\u003e(1) 12mm \/ 14mm Open End Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!----\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":45382834913497,"sku":"JT9-724020","price":2353.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/724020main.jpg?v=1748882394"},{"product_id":"makita-rf1101-2-25hp-router","title":"Makita RF1101 Router 2.25HP","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable speed dial (8,000 - 24,000 RPM) matches speed to the application\u003c\/li\u003e\n\u003cli\u003eIndustrial cam-lock lever for fast, easy depth adjustment\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eRugged aluminum motor housing for rigidity\u003c\/li\u003e\n\u003cli\u003eSub-base accepts industry-standard template guides\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/4\" and 1\/2\" collets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Makita 2.25hp Router (model RF1101) combines power with convenience and ease-of-use features for improved performance. The RF1101 has a powerful 11 Amp motor with soft start for smoother start-ups, and electronic speed control that maintains constant speed under load. The variable speed control dial allows the user to match the speed to the application between 8,000 - 24,000 RPM.\u003c\/p\u003e\n\u003cp\u003eThe sub-base accepts industry standard template guides, and the durable flat top provides increased stability when changing bits. The RF1101 is engineered with all-ball bearing construction for longer tool life and accepts \u003ca rel=\"noopener\" title=\"All Router Bits\" href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" target=\"_blank\"\u003e1\/2\" and 1\/4\" shank bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEvery Makita product carries a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e unless otherwise stated. (Some products have a longer warranty, i.e. Lithium-Ion Tools, Batteries \u0026amp; Chargers include a 3-year warranty, etc.)\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control\u003c\/strong\u003e dial enables user to match speed to the application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic speed control\u003c\/strong\u003e maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start feature\u003c\/strong\u003e for smooth start-ups\u003c\/li\u003e\n\u003cli\u003eRugged \u003cstrong\u003ealuminum motor housing\u003c\/strong\u003e with small 3-1\/4\" diameter for easy handling\u003c\/li\u003e\n\u003cli\u003eSub-base accepts \u003cstrong\u003eindustry-standard template guides\u003c\/strong\u003e for convenience\u003c\/li\u003e\n\u003cli\u003ePowerful \u003cstrong\u003e11 AMP motor delivers 8,000-24,000 RPM\u003c\/strong\u003e for the most demanding applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow noise (81dB)\u003c\/strong\u003e and low vibration for operator comfort\u003c\/li\u003e\n\u003cli\u003eDurable \u003cstrong\u003eflat top design for stability\u003c\/strong\u003e when changing bits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial cam-lock\u003c\/strong\u003e for fast and easy depth adjustment and removal of motor\u003c\/li\u003e\n\u003cli\u003eBits are installed\/removed with \u003cstrong\u003etwo identical size wrenches\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-ball bearing construction\u003c\/strong\u003e for longer tool life\u003c\/li\u003e\n\u003cli\u003eLarge \u003cstrong\u003ecalibrated depth control ring\u003c\/strong\u003e for easy depth adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternally accessible brushes\u003c\/strong\u003e for greater serviceability\u003c\/li\u003e\n\u003cli\u003eAccepts \u003cstrong\u003e1\/2\" shank and 1\/4\" shank\u003c\/strong\u003e bits\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCollet capacity: \u003c\/strong\u003e1\/4\" \u0026amp; 1\/2\"\u003cbr\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e8,000 - 24,000 RPM\u003cbr\u003e\u003cstrong\u003eAmps:\u003c\/strong\u003e 11\u003cbr\u003e\u003cstrong\u003eMax. horsepower\u003c\/strong\u003e: 2.25hp\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 7.2 lbs.\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 8-3\/4\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet with nut\u003c\/li\u003e\n\u003cli\u003eWrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943602938073,"sku":"RF1101","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/RF1101-1.jpg?v=1727205503"},{"product_id":"makita-rf1101kit2-2-25hp-router-kit-with-plunge-base","title":"Makita RF1101KIT2 Router Kit with Plunge Base 2.25HP","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable speed (8,000 - 24,000 RPM)\u003c\/li\u003e\n\u003cli\u003eMaximum plunge depth of 2-19\/32\"\u003c\/li\u003e\n\u003cli\u003eLow noise (81dB) and low vibration\u003c\/li\u003e\n\u003cli\u003eRugged aluminum motor housing with slender 3-1\/4\" diameter\u003c\/li\u003e\n\u003cli\u003eIdeal for mortises, inlay work, and decorative routing\u003c\/li\u003e\n\u003cli\u003eAccepts 1\/2\" and 1\/4\" shank bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Makita 2.25hp Router Kit (model RF1101KIT2) combines power with convenience and ease-of-use features for improved performance. It features the RF1101 Router, as well as the most popular accessories for a range of applications.\u003c\/p\u003e\n\u003cp\u003eThe RF1101 has a powerful 11 AMP motor with soft start for smoother start-ups, and electronic speed control that maintains constant speed under load. The variable speed control dial allows the user to match the speed to the application between 8,000 - 24,000 RPM. \u003c\/p\u003e\n\u003cp\u003eThe sub-base accepts industry standard template guides, and the durable flat top provides increased stability when changing bits. The RF1101 is engineered with all-ball bearing construction for longer tool life and accepts \u003ca rel=\"noopener\" title=\"All Router Bits\" href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" target=\"_blank\"\u003e1\/2\" and 1\/4\" shank bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEvery Makita product carries a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e unless otherwise stated. (Some products have a longer warranty, i.e. Lithium-Ion Tools, Batteries \u0026amp; Chargers include a 3-year warranty, etc.)\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 11 AMP motor delivers 8,000-24,000 RPM for the most demanding applications\u003c\/li\u003e\n\u003cli\u003eVariable speed control dial enables user to match the speed to the application\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eSoft start feature for smoother start-ups\u003c\/li\u003e\n\u003cli\u003eLow noise (81dB) and low vibration for operator comfort\u003c\/li\u003e\n\u003cli\u003eRugged aluminum motor housing with slender 3-1\/4\" diameter for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable flat top design for stability when changing bits\u003c\/li\u003e\n\u003cli\u003eAll-ball bearing construction for longer tool life\u003c\/li\u003e\n\u003cli\u003eExternally accessible brushes for greater serviceability\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlunge base:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConveniently located plunge lock lever for operator convenience\u003c\/li\u003e\n\u003cli\u003eEasy-to-use fine depth adjustment with 3 depth stops for consistent plunge cutting\u003c\/li\u003e\n\u003cli\u003eNickel-plated plunge poles prevent corrosion for longer tool life\u003c\/li\u003e\n\u003cli\u003eMaximum plunge depth of 2-19\/32\"\u003c\/li\u003e\n\u003cli\u003eRemovable clear plastic shield protects the operator from airborne debris\u003c\/li\u003e\n\u003cli\u003eSub base accepts industry standard template guides for convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCollet capacity: \u003c\/strong\u003e1\/4\" \u0026amp; 1\/2\"\u003cbr\u003e\u003cstrong\u003ePlunge capacity:\u003c\/strong\u003e 2-19\/32\"\u003cbr\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e8,000 - 24,000 RPM\u003cbr\u003e\u003cstrong\u003eAmps:\u003c\/strong\u003e 11\u003cbr\u003e\u003cstrong\u003eMax. horsepower\u003c\/strong\u003e: 2.25hp\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 7.2 lbs.\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 20 lbs.\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 8-3\/4\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePlunge base\u003c\/li\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet with nut\u003c\/li\u003e\n\u003cli\u003e2-1\/2\" Clear sub base\u003c\/li\u003e\n\u003cli\u003e(2) Wrenches 27\u003c\/li\u003e\n\u003cli\u003eSpanner wrench\u003c\/li\u003e\n\u003cli\u003eHex wrench\u003c\/li\u003e\n\u003cli\u003eTool case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943603003609,"sku":"RF1101KIT2","price":379.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/RF1101KIT2-1.jpg?v=1727207083"},{"product_id":"makita-rp2301fc-3-25hp-plunge-router-with-variable-speed","title":"Makita RP2301FC 3.25hp Plunge Router with Variable Speed","description":"\u003cp\u003eThe Makita 3.25hp Plunge Router with Variable Speed (model RP2301FC) delivers powerful precision with smooth plunge action and superior performance. It features variable speed, electronic speed control, and an electric brake. The RP2301FC is engineered with 15 AMP power, ease-of-use features, and an increased plunge capacity for a wide range of applications including fine woodworking, cabinetry, furniture making, windows, doors, and more.\u003c\/p\u003e\n\u003cp\u003eThe 15 AMP motor features variable speed from 9,000 - 22,000 RPM, and electronic speed control to maintain constant speed under load. The RP2301FC has a soft start feature for smooth start-ups and an electric brake for increased productivity. It has a 0” – 2-3\/4” plunge depth capacity for easy penetration into the work piece, with linear ball bearings for smooth plunge action. \u003c\/p\u003e\n\u003cp\u003eThe RP2301FC has ergonomic rubberized handles with a built-in two-finger switch for added control, with a lock-on trigger for continuous operation and built-in twin LED lights that illuminate the work area for increased visibility. The quick release plunge depth adjustment with micro control and three preset depth stops are engineered for added precision, and the plunge lock lever is conveniently located for efficient operation.\u003c\/p\u003e\n\u003cp\u003eThis router is equipped with a shaft lock for quick and easy bit changes, and the “tool-less” template guide system provides quick and easy installation and removal. Additional ease-of-use features include easy-to-read depth scales, a chip deflector engineered to direct chips away from the operator, and a durable flat top design for stability when changing bits.\u003c\/p\u003e\n\u003cp\u003eEvery Makita product carries a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e unless otherwise stated. (Some products have a longer warranty, i.e. Lithium-Ion Tools, Batteries \u0026amp; Chargers include a 3-year warranty, etc.)\u003c\/p\u003e\n\u003cp\u003eAccepts \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" rel=\"noopener\" target=\"_blank\"\u003e1\/2\" and 1\/4\" shank bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 15 AMP motor delivers 9,000-22,000 RPM for smooth routing\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eVariable speed control dial enables user to match the speed to the application\u003c\/li\u003e\n\u003cli\u003eSoft start feature for smooth start-ups\u003c\/li\u003e\n\u003cli\u003eElectric brake for increased productivity\u003c\/li\u003e\n\u003cli\u003e0\" - 2-3\/4\" plunge depth capacity for easy penetration into work piece\u003c\/li\u003e\n\u003cli\u003eLinear ball bearings for smooth plunge action and superior performance\u003c\/li\u003e\n\u003cli\u003eQuick release plunge depth adjustment with micro control along with 3 preset depth stops for added precision\u003c\/li\u003e\n\u003cli\u003eBuilt-in twin LED lights illuminate the work area for increased visibility \u003c\/li\u003e\n\u003cli\u003eOversized ball bearing construction for longer tool life\u003c\/li\u003e\n\u003cli\u003eErgonomic rubberized handles with built-in large two-finger switch for added control and use\u003c\/li\u003e\n\u003cli\u003eConveniently located plunge lock lever for efficient operation\u003c\/li\u003e\n\u003cli\u003eShaft lock for quick and easy bit changes\u003c\/li\u003e\n\u003cli\u003e\"Tool-less\" template guide system for quick and easy installation and removal\u003c\/li\u003e\n\u003cli\u003eLock-on trigger switch for continuous operation\u003c\/li\u003e\n\u003cli\u003eBuilt in fan with labyrinth construction minimizes dust from entering the tool for longer tool life\u003c\/li\u003e\n\u003cli\u003eEasy-to-read depth scales\u003c\/li\u003e\n\u003cli\u003eChip deflector engineered to direct chips away from the operator\u003c\/li\u003e\n\u003cli\u003eDurable flat top design for stability when changing bits\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCollet capacity: \u003c\/strong\u003e1\/4\" \u0026amp; 1\/2\"\u003cbr\u003e\u003cstrong\u003ePlunge capacity:\u003c\/strong\u003e 2-3\/4\"\u003cbr\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e9,000 - 22,000 RPM\u003cbr\u003e\u003cstrong\u003eAmps:\u003c\/strong\u003e 15\u003cbr\u003e\u003cstrong\u003eMax. horsepower\u003c\/strong\u003e: 3-1\/4hp\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 13.4 lbs.\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 17.6 lbs.\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 12-1\/4\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003eExtend depth adjustment knob\u003c\/li\u003e\n\u003cli\u003eSpanner wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943603101913,"sku":"RP2301FC","price":444.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/RP2301FC-1.jpg?v=1727209524"},{"product_id":"makita-rt0701c-1-25hp-compact-router","title":"Makita RT0701C Compact Router 1.25HP","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable speed control matches speed to application (10,000 - 30,000 RPM)\u003c\/li\u003e\n\u003cli\u003eErgonomic design for comfortable, one-handed operation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty aluminum motor housing\u003c\/li\u003e\n\u003cli\u003eNon-marring base for durability and workpiece protection\u003c\/li\u003e\n\u003cli\u003eQuick-release cam lock system for depth adjustments and base installation\u003c\/li\u003e\n\u003cli\u003eAccepts 1\/4\" shank bits and industry-standard template guides\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/4\" collet, trimmer base, and straight guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Makita Compact Router (model RT0701C) delivers performance and precision in a compact design. With a full 1.25HP maximum horsepower, the RT0701C is engineered for a range of routing applications. It is ideal for small profiles, dovetailing, door hinges, and more.\u003c\/p\u003e\n\u003cp\u003eThe RT0701C has a powerful 1.25HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application. Additional performance features include electronic speed control to maintain constant speed under load, and soft start feature for smooth start-ups. The RT0701C is double-insulated with a heavy-duty aluminum motor housing for increased durability.\u003c\/p\u003e\n\u003cp\u003eEngineered for precision, the RT0701C includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal\/installation, with a high-visibility base design for improved handling and performance.\u003c\/p\u003e\n\u003cp\u003eAdditional features include a slim and ergonomic design that weighs only 3.9 lbs. with a durable flat top design for added convenience when changing bits. The base can be removed quickly, and the shaft lock is engineered for quick and easy bit changes.\u003c\/p\u003e\n\u003cp\u003eEvery Makita product carries a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e unless otherwise stated. (Some products have a longer warranty, i.e. Lithium-Ion Tools, Batteries \u0026amp; Chargers include a 3-year warranty, etc.)\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" rel=\"noopener\" target=\"_blank\"\u003e1\/4\" shank router bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control\u003c\/strong\u003e dial to match speed of application\u003c\/li\u003e\n\u003cli\u003eSmooth \u003cstrong\u003erack-and-pinion fine depth adjustment\u003c\/strong\u003e system for more precise settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim and ergonomically-designed body\u003c\/strong\u003e for increased comfort and control\u003c\/li\u003e\n\u003cli\u003eQuick-release \u003cstrong\u003ecam lock system\u003c\/strong\u003e for convenient depth adjustments and base removal\/installation\u003c\/li\u003e\n\u003cli\u003eAccepts \u003cstrong\u003eindustry-standard\u003c\/strong\u003e template guides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic speed control\u003c\/strong\u003e maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start feature\u003c\/strong\u003e for smooth start ups\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh visibility base design\u003c\/strong\u003e for improved handling and performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy-duty \u003cstrong\u003ealuminum motor housing\u003c\/strong\u003e engineered for increased durability\u003c\/li\u003e\n\u003cli\u003eShaft lock for quick and easy \u003cstrong\u003ebit changes\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable \u003cstrong\u003eflat top design\u003c\/strong\u003e for added convenience when changing bits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-marring\u003c\/strong\u003e, high-durability base insert for increased work piece protection\u003c\/li\u003e\n\u003cli\u003eEasy-to-read \u003cstrong\u003edepth scales\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCollet: \u003c\/strong\u003e1\/4\"\u003cbr\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e10,000 - 30,000 RPM\u003cbr\u003e\u003cstrong\u003eAmps:\u003c\/strong\u003e 6.5\u003cbr\u003e\u003cstrong\u003eMax. horsepower\u003c\/strong\u003e: 1.25hp\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 3.9 lbs.\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 7-7\/8\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTrimmer Base\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003eStraight Guide\u003c\/li\u003e\n\u003cli\u003e(2) Spanner Wrenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943603134681,"sku":"RT0701C","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/RT0701C-1.jpg?v=1727124413"},{"product_id":"makita-xtr01t7-18v-lxt-lithium-ion-brushless-cordless-compact-router-kit-5-0-ah","title":"Makita XTR01T7 18V LXT Lithium-Ion Brushless Cordless Compact Router Kit (5.0 Ah)","description":"\u003cp\u003eCorded power meets cordless convenience with the 18V LXT Brushless Compact Router Kit, model XTR01T7. The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. The kit includes two efficient 18V LXT 5.0Ah batteries, and each reaches a full charge in only 45 minutes for less downtime and increased productivity.\u003c\/p\u003e\n\u003cp\u003eThe XTR01T7 is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial (10,000 – 30,000 RPM) to match the speed to the application, with electronic speed control to maintain constant speed under load and soft start feature for smoother start-ups and better accuracy. Convenience features include the smooth rack-and-pinion fine depth adjustment system for more precise settings, dual LED lights to illuminate the work surface, and a quick release cam lock system for convenient depth adjustments and base removal\/installation.\u003c\/p\u003e\n\u003cp\u003eThe kit includes a plunge base. For users of corded Makita Compact Routers (models RT0700C, RT0701C), the bases used with these corded routers are fully compatible with the XTR01T7. In addition, the XTR01T7 easily connects to Makita vacuum cleaners with the optional dust nozzle for improved dust extraction.\u003c\/p\u003e\n\u003cp\u003eFor improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging, and overheating.\u003c\/p\u003e\n\u003cp\u003eAll Makita Lithium-Ion Tools, Batteries, and Chargers include a 3-year warranty.\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" rel=\"noopener\" target=\"_blank\"\u003e1\/4\" shank router bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMakita-built brushless motor delivers faster and more accurate cuts in a variety of materials\u003c\/li\u003e\n\u003cli\u003eLXT technology delivers 380 feet of cutting performance in red oak using a 1\/4\" (6mm) straight bit at a 5\/32\" (4mm) depth with a 5.0Ah battery\u003c\/li\u003e\n\u003cli\u003eThe electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application\u003c\/li\u003e\n\u003cli\u003eVariable speed control dial (10,000 - 30,000 RPM) to match the speed to the application\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eOn\/Off button with separate lock button helps prevent accidental start-up of the tool for user and workpiece protection\u003c\/li\u003e\n\u003cli\u003eSoft start feature for smoother start-ups and better accuracy\u003c\/li\u003e\n\u003cli\u003eSmooth rack-and-pinion fine depth adjustment system for more precise settings\u003c\/li\u003e\n\u003cli\u003eSlim and ergonomically designed body with rubberized grip for increased comfort\u003c\/li\u003e\n\u003cli\u003eAluminum housing and base for increased durability and accuracy\u003c\/li\u003e\n\u003cli\u003eDual LED lights illuminate the work area\u003c\/li\u003e\n\u003cli\u003eQuick release cam lock system for convenient depth adjustments and base removal\/installation\u003c\/li\u003e\n\u003cli\u003eHigh visibility base design for improved handling and performance\u003c\/li\u003e\n\u003cli\u003eAccepts industry standard template guides\u003c\/li\u003e\n\u003cli\u003eComes with a plunge base for added versatility (additional bases and attachments sold separately)\u003c\/li\u003e\n\u003cli\u003ePlunge capacity of 0 - 1-3\/8\" with included plunge base attached (plunge capacity of 0-1-9\/16\" with trimmer base sold separately)\u003c\/li\u003e\n\u003cli\u003eBase can be removed quickly to install other bases\u003c\/li\u003e\n\u003cli\u003eNon-marring high-durability base insert for increased work piece protection\u003c\/li\u003e\n\u003cli\u003eShaft lock for quick and easy bit changes\u003c\/li\u003e\n\u003cli\u003eEasy-to-read depth scales\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact and ergonomic design at 8-7\/8\" tall; weighs only 4.6 lbs. with battery for reduced operator fatigue\u003c\/li\u003e\n\u003cli\u003eConnects to Makita vacuum cleaners with optional dust nozzle for a cleaner work environment\u003c\/li\u003e\n\u003cli\u003eEquipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating\u003c\/li\u003e\n\u003cli\u003eRapid Optimum Charger and Dual Port Rapid Optimum Chargers communicate with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature\u003c\/li\u003e\n\u003cli\u003eRapid Optimum Charger and Dual Port Rapid Optimum Chargers have a built-in fan to cool the battery for faster, more efficient charging\u003c\/li\u003e\n\u003cli\u003eMakita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger\u003c\/li\u003e\n\u003cli\u003eCompatible with Makita 18V Lithium-Ion batteries with a Star symbol\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty on tool, battery, and charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e10,000 - 30,000 RPM\u003cbr\u003e\u003cstrong\u003ePlunge capacity:\u003c\/strong\u003e 1-9\/16\"\u003cbr\u003e\u003cstrong\u003eCollet:\u003c\/strong\u003e 1\/4\"\u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 18V LXT Lithium-Ion\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 5-1\/4\"\u003cbr\u003e\u003cstrong\u003eNet weight (with battery): \u003c\/strong\u003e4.6 lbs.\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 20 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e18V LXT Brushless Compact Router (XTR01Z)\u003c\/li\u003e\n\u003cli\u003e(2) 18V LXT Lithium-Ion 5.0Ah Batteries\u003c\/li\u003e\n\u003cli\u003e18V LXT Lithium-Ion Rapid Optimum Charger\u003c\/li\u003e\n\u003cli\u003eMAKPAC Interlocking Case, X-Large\u003c\/li\u003e\n\u003cli\u003eTrimmer base\u003c\/li\u003e\n\u003cli\u003ePlunge base\u003c\/li\u003e\n\u003cli\u003eStraight guide\u003c\/li\u003e\n\u003cli\u003eSpanner wrench\u003c\/li\u003e\n\u003cli\u003eSpanner wrench\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003e3\/8\" Collet\u003c\/li\u003e\n\u003cli\u003eTemplate guide\u003c\/li\u003e\n\u003cli\u003eTemplate guide 5\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943603921113,"sku":"XTR01T7","price":539.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/XTR01T7-1.jpg?v=1727453106"},{"product_id":"makita-xtr01z-18v-lxt-lithium-ion-cordless-compact-router-tool-only","title":"Makita XTR01Z 18V LXT Lithium-Ion Cordless Compact Router (Tool Only)","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVariable speed control (10,000 - 30,000 RPM)\u003c\/li\u003e\n\u003cli\u003ePlunge capacity of 1-9\/16\"\u003c\/li\u003e\n\u003cli\u003eSmooth rack-and-pinion fine depth adjustment system\u003c\/li\u003e\n\u003cli\u003eAluminum housing and base for increased durability\u003c\/li\u003e\n\u003cli\u003eDual LED lights illuminate work area\u003c\/li\u003e\n\u003cli\u003eAccepts industry-standard template guides\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/4\" and 3\/8\" collets\u003c\/li\u003e\n\u003cli\u003eTool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorded power meets cordless convenience with the 18V LXT Brushless Compact Router (model XTR01Z). The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It is compatible with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/makita\/type_batteries-chargers\" title=\"All Makita Batteries\" rel=\"noopener\" target=\"_blank\"\u003eMakita 18V LXT Lithium-Ion Batteries\u003c\/a\u003e (sold separately).\u003c\/p\u003e\n\u003cp\u003eThe XTR01Z is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial (10,000 – 30,000 RPM) to match the speed to the application, with electronic speed control to maintain constant speed under load and soft start feature for smoother start-ups and better accuracy.\u003c\/p\u003e\n\u003cp\u003eConvenience features include the smooth rack-and-pinion fine depth adjustment system for more precise settings, dual LED lights to illuminate the work surface, and a quick release cam lock system for convenient depth adjustments and base removal\/installation. For users of corded Makita Compact Routers, the bases used with these are fully compatible with the XTR01Z. In addition, the XTR01Z easily connects to Makita Vacuums with the optional dust nozzle for improved dust extraction.\u003c\/p\u003e\n\u003cp\u003eFor improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating.\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" rel=\"noopener\" target=\"_blank\"\u003e1\/4\" shank bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEvery Makita Lithium-Ion Tool, Battery, and Charger carries a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e from the date of original purchase.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLXT technology delivers \u003cstrong\u003e380 feet of cutting performance in red oak\u003c\/strong\u003e using a 1\/4\" (6mm) straight bit at a 5\/32\" (4mm) depth with a 5.0Ah battery (battery not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakita-built brushless motor\u003c\/strong\u003e delivers faster and more accurate cuts in a variety of materials\u003c\/li\u003e\n\u003cli\u003eThe electronically-controlled motor efficiently u\u003cstrong\u003eses energy to match torque\u003c\/strong\u003e and RPM to the changing demands of the application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control\u003c\/strong\u003e dial (10,000 - 30,000 RPM) to match the speed to the application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic speed control\u003c\/strong\u003e maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eOn\/Off button \u003cstrong\u003ewith separate lock button\u003c\/strong\u003e helps prevent accidental start-up of the tool for user and workpiece protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start feature\u003c\/strong\u003e for smoother start-ups and better accuracy\u003c\/li\u003e\n\u003cli\u003eSmooth rack-and-pinion \u003cstrong\u003efine depth adjustment system\u003c\/strong\u003e for more precise settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim and ergonomically-designed body\u003c\/strong\u003e with rubberized grip for increased comfort and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum housing and base\u003c\/strong\u003e for increased durability and accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED lights\u003c\/strong\u003e illuminate the work area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-release cam lock system\u003c\/strong\u003e for convenient depth adjustments and base removal\/installation\u003c\/li\u003e\n\u003cli\u003eAccepts \u003cstrong\u003eindustry-standard\u003c\/strong\u003e template guides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh visibility base design\u003c\/strong\u003e for improved handling and performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBase can be \u003cstrong\u003eremoved quickly\u003c\/strong\u003e to install other bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlunge capacity \u003c\/strong\u003eof 0 - 1-3\/8\" with plunge base attached and 0 - 1-9\/16\" with trimmer base attached (bases sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-marring\u003c\/strong\u003e high-durability base insert for increased work piece protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft lock\u003c\/strong\u003e for quick and easy bit changes\u003c\/li\u003e\n\u003cli\u003eEasy-to-read \u003cstrong\u003edepth scales\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompact and ergonomic design at \u003cstrong\u003e8-7\/8\" tall\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipped with \u003cstrong\u003eStar Protection Computer Controls\u003c\/strong\u003e to protect against overloading, over-discharging and over-heating\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e3-year limited warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCollet capacity: \u003c\/strong\u003e1\/4\"\u003cbr\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e10,000 - 30,000 RPM\u003cbr\u003e\u003cb\u003ePlunge capacity: \u003c\/b\u003e1-9\/16\"\u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 18V LXT Lithium-Ion\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4.6 lbs.\u003cbr\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 5-1\/4\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spanner wrenches\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003e3\/8\" Collet\u003c\/li\u003e\n\u003cli\u003eStraight guide\u003c\/li\u003e\n\u003cli\u003eTemplate guide\u003c\/li\u003e\n\u003cli\u003eTrimmer base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943604248793,"sku":"XTR01Z","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/XTR01Z-1.jpg?v=1727269643"},{"product_id":"makita-gtr01d1-40v-max-xgt-brushless-cordless-compact-router-kit-2-5ah","title":"Makita GTR01D1 40V XGT Brushless Cordless Compact Router Kit (2.5Ah)","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMakita-built brushless 1.5HP motor\u003c\/li\u003e\n\u003cli\u003eVariable speed control (10,000 - 31,000 RPM)\u003c\/li\u003e\n\u003cli\u003eDual LED lights\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains constant speed under load\u003c\/li\u003e\n\u003cli\u003eSoft start feature for smoother start-up\u003c\/li\u003e\n\u003cli\u003eQuick release cam lock system for convenient depth adjustments and base removal\/installation\u003c\/li\u003e\n\u003cli\u003eAccepts industry standard template guides\u003c\/li\u003e\n\u003cli\u003eIncludes 40V max XGT Battery (2.5Ah) and Rapid Optimum Charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 40V max XGT Brushless Compact Router is a powerful and ergonomically-sound tool designed for demanding routing tasks. The 1.5HP motor and variable speed control dial (10,000 - 31,000 RPM) allow users to match speed to the application at hand. Thanks to its slim design, this router is excellent for edge routing. The GTR01D1 Kit includes a 40V max XGT Battery (2.5Ah) and Rapid Optimum Charger.\u003c\/p\u003e\n\u003cp\u003eConvenience features include the soft start feature, dual LED lights that illuminate the workpiece, and an on\/off button with a separate lock button. There’s also a quick-release cam lock system for quick depth adjustments and easy base removal\/installation. For even more versatility, the router accepts industry-standard template guides.\u003c\/p\u003e\n\u003cp\u003eXGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.\u003c\/p\u003e\n\u003cp\u003eEvery Makita Lithium-Ion Tool, Battery, and Charger carries a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e from the date of original purchase.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOUTPOWER:\u003c\/strong\u003e Makita-built brushless motor delivers up to 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOUTSMART: \u003c\/strong\u003eThe electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOUTLAST:\u003c\/strong\u003e XPT is engineered to provide increased dust and water resistance in harsh job site conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control\u003c\/strong\u003e dial (10,000 - 31,000 RPM) to match the speed to the application\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains \u003cstrong\u003econstant speed under load\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn\/Off button with \u003cstrong\u003eseparate lock button\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft start feature\u003c\/strong\u003e for smoother start-ups and better accuracy\u003c\/li\u003e\n\u003cli\u003eSmooth rack-and-pinion \u003cstrong\u003efine depth adjustment system\u003c\/strong\u003e for more precise settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim and ergonomically-designed body\u003c\/strong\u003e with rubberized grip for increased comfort and control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum housing and base\u003c\/strong\u003e for increased durability and accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED lights\u003c\/strong\u003e illuminate the work area\u003c\/li\u003e\n\u003cli\u003eQuick release cam lock system for \u003cstrong\u003econvenient depth adjustments\u003c\/strong\u003e and base removal\/installation\u003c\/li\u003e\n\u003cli\u003eAccepts \u003cstrong\u003eindustry-standard template guides\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh visibility base design\u003c\/strong\u003e for improved handling and performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle lock\u003c\/strong\u003e for quick and easy bit changes\u003c\/li\u003e\n\u003cli\u003eDigital communication within XGT optimizes performance to provide up to \u003cstrong\u003e2X longer sustained power under heavy-load applications\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eXGT Tools and Batteries are designed with a \u003cstrong\u003emulti-layer contact interface\u003c\/strong\u003e for more constant power delivery to take on high-current demands\u003c\/li\u003e\n\u003cli\u003eXGT Batteries feature rigid rails with \u003cstrong\u003eimpact-resistant construction\u003c\/strong\u003e to secure the battery to the tool during high-demand applications\u003c\/li\u003e\n\u003cli\u003eRapid Charger features \u003cstrong\u003edual-fan design\u003c\/strong\u003e that circulates air through the battery to cool the battery and circuit board quickly for faster charging\u003c\/li\u003e\n\u003cli\u003eXGT Rapid Charger’s \u003cstrong\u003edigital display\u003c\/strong\u003e indicates battery charge level (-80%, +80%, 100%)\u003c\/li\u003e\n\u003cli\u003eCharger’s built-in chip thoroughly communicates during the charging process to \u003cstrong\u003econtrol current, voltage, and temperature\u003c\/strong\u003e for more efficient charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eVariable speed: \u003c\/strong\u003e10,000 - 31,000 RPM\u003cbr\u003e\u003cstrong\u003ePlunge capacity:\u003c\/strong\u003e 1-9\/16\"\u003cbr\u003e\u003cstrong\u003eCollet chuck capacity: \u003c\/strong\u003e1\/4\"\u003cbr\u003e\u003cstrong\u003eNet weight (with battery):\u003c\/strong\u003e 4.85 lbs.\u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 40V\u003cbr\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e 40V max XGT\u003cbr\u003e\u003cstrong\u003eShipping weight: \u003c\/strong\u003e15.9 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e40V max XGT Brushless Compact Router\u003c\/li\u003e\n\u003cli\u003e40V max XGT Rapid Optimum Charger\u003c\/li\u003e\n\u003cli\u003e40V max XGT 2.5 Ah Battery\u003c\/li\u003e\n\u003cli\u003e1\/4\" collet\u003c\/li\u003e\n\u003cli\u003eStraight guide\u003c\/li\u003e\n\u003cli\u003eTemplate guide\u003c\/li\u003e\n\u003cli\u003eTrimmer base\u003c\/li\u003e\n\u003cli\u003e(2) Spanner wrenches\u003c\/li\u003e\n\u003cli\u003eTool bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GmI802mbDLA?si=HmL8ofFnJPdxTibo\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":46133032091865,"sku":"GTR01D1","price":534.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/GTR01D1-1.jpg?v=1732119534"},{"product_id":"festool-router-of-1010-rebq-plus","title":"Festool Router OF 1010 REBQ-Plus","description":"\u003cp\u003eNow comes with the \u003ca rel=\"noopener\" title=\"Festool Router Edge Guide SA-OF 1010\/MFK product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-edge-guide-for-mfk-700-of-1010-routers\" target=\"_blank\"\u003eParallel Edge Guide.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe OF 1010 Router enables you to work with maximum precision. The double-sided column clamp makes it extremely rigid, and the parallel edge guide can be precisely adjusted without any tools. The easily accessible working area with LED light ring provides an optimal view of the workpiece. The light ring provides shadow-free lighting directly on the workpiece for precise routing results.\u003c\/p\u003e\n\u003cp\u003eThe easily accessible working area equipped with an LED light ring provides an optimal view of the workpiece. It features two brightness levels and provides shadow-free lighting directly on the workpiece - exactly what you need for extremely precise routing results.\u003c\/p\u003e\n\u003cp\u003eThe double-sided column clamp makes the router extremely rigid, and the routing depth can be set to an accuracy of 1\/256\" (1\/10 mm). Users have a clear view of the routing bit, ensuring results with absolute precision. For routing profiles, grooves, rabbets, and dovetail joints, the OF 1010 impresses with a wide variety of possible applications.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting all the way around:\u003c\/strong\u003e The LED light has two brightness levels and is integrated into the base panel, providing light directly on the workpiece. The battery unit is removable and can be recharged via the USB-C interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid bit replacement:\u003c\/strong\u003e Router bits for the OF 1010 can be changed quickly and safely thanks to the easy-to-access work area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble column clamping:\u003c\/strong\u003e The OF 1010 is clamped to both guide columns at the same time, meaning that the router is secured in place. This ensures perfect routing results and avoids time-consuming rework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact structure:\u003c\/strong\u003e Its ergonomic handle makes the OF 1010 feel like an extension of your hand and makes guiding the machine easy and convenient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine adjustment:\u003c\/strong\u003e The OF 1010 has precise depth adjustment. It takes a few seconds and minimal effort to finely adjust the routing depth accurately to 1\/256\" (0.1 mm) using the dial.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated support:\u003c\/strong\u003e Fitted with a support to prevent the router from tipping over when used with a guide rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean work:\u003c\/strong\u003e The unique chip deflector enables optimal dust extraction and guarantees excellent suction power when routing edges in combination with a Festool Dust Extractor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 1,010 watt\u003cbr\u003e\u003cstrong\u003eIdle engine speed:\u003c\/strong\u003e 9,500 - 23,000 RPM\u003cbr\u003e\u003cstrong\u003eCollet dia.:\u003c\/strong\u003e 1\/4\" - 5\/16\" (6 - 8 mm)\u003cbr\u003e\u003cstrong\u003eRouting stroke:\u003c\/strong\u003e 2-1\/8\" (55 mm)\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 5\/16\" (8 mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\" (27 mm) \/ 1-13\/32\" (36 mm)\u003cbr\u003e\u003cstrong\u003eCable length:\u003c\/strong\u003e 13.1 ft.\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.06 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight module LM-OF 1010 R\u003c\/li\u003e\n\u003cli\u003eParallel Edge Guide\u003c\/li\u003e\n\u003cli\u003e5\/16\" clamping collet (8 mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1\/4\" clamping collet (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eCollet wrench\u003c\/li\u003e\n\u003cli\u003ePlug-It power cable\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 237\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":46239208800473,"sku":"578017","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/578017-1.jpg?v=1754020987"},{"product_id":"scm-minimax-tw-55es-tilting-spindle-shaper-w-ready-3up-control-3ph","title":"SCM Minimax TW 55es Tilting Spindle Shaper w\/Ready 3UP Control (3PH)","description":"\u003cp\u003eThe Minimax TW 55es is the culmination of years of experience in manufacturing quality solid wood SCM products. This 4-speed heavy duty machine is standard with both a sliding table and tilt! The slider has hardened steel guide ways and precision bearings, so it incorporates the exact technology found in SCM's top selling sliding table saws! The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable.\u003c\/p\u003e\n\u003cp\u003eThis model of the TW 55es features a \"Ready 3UP\" control panel, a 3NC axes at your fingertips. The operator can program (or manually set) spindle height, spindle angle, and entire fence position on the control panel. Ready 3UP features a 4\" LCD color screen for easy readout, and has a memory capacity of up to 99 programs.\u003c\/p\u003e\n\u003cp\u003eA \"Flex One\" spindle molder fence features automatic movement with respect to the tool diameter, manual adjustment of the infeed table (via handwheel), rapid exclusion system from the work table, and aluminum tables with connecting bars.\u003c\/p\u003e\n\u003cp\u003eThe Minimax TW 55es has a wide sliding table that rides on hardened steel guideways. The design is the same that we incorporate into our high end sliding table saws. The sliding table greatly increases the shaper’s versatility, and makes tenoning operations as easy as can be. Raised panel doors are also facilitated on the sliding table shaper.\u003c\/p\u003e\n\u003cp\u003eThe tilting arbor shaper makes this machine even more versatile over the long term. The shaper tilts backwards making it possible to use a power feeder more effectively while tilting. A large shaper hood has three controlled axes. The shaper hood has memory pins so that it easily goes right back to the same position if removed from the table. This makes changeover much quicker.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eExtruded anodized aluminum sliding table on precision hardened steel guideways\u003c\/li\u003e\n\u003cli\u003eSpindle molder reverse rotation\u003c\/li\u003e\n\u003cli\u003eReady 3UP upper control panel for programming spindle height, spindle angle, and fence position\u003c\/li\u003e\n\u003cli\u003eElectric pre-setting for feeder\u003c\/li\u003e\n\u003cli\u003eDevice for angular cutting with 2 flip-over stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSpindle tilting range:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e90° to -45°\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eMax. useful spindle length:\u003c\/strong\u003e 3.5\" - 5\" (90 - 125mm)\u003cbr\u003e\u003cb\u003eCapacity, under the nut, w\/interchangeable spindle:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e3.3\" (85 mm)\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003eMax. useful spindle length: \u003c\/strong\u003e3.\u003cspan\u003e5\" (90 mm)*\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. tool dia. profiling:\u003c\/strong\u003e\u003cspan\u003e 8.25\" (210 mm)\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eMax. tool dia. lowered under table at 90°:\u003c\/strong\u003e 9.44\" (240 mm)\u003cbr\u003e\u003cstrong\u003eSliding table dimensions: \u003c\/strong\u003e\u003cspan\u003e47.2\" x 14.2\" (1,200 x 360 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eSpindle molder speeds: \u003c\/strong\u003e\u003cspan\u003e4,000\/7,000\/9,000\/12,000 RPM\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eMotor: \u003c\/b\u003e\u003cspan\u003e8hp, 3-phase\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eElectrical requirements*:\u003c\/strong\u003e 220V, 28 A, 60 Hz\u003cbr\u003e\u003cstrong\u003eExhaust outlets dia.:\u003c\/strong\u003e\u003cspan\u003e 4.75\" (120 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. required dust collection:\u003c\/strong\u003e\u003cspan\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eGross weight: \u003c\/strong\u003e1,065 lbs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSpindle (1-1\/4\")\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eShaper push handle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpare belts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eToolbox\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility. \u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":46820700291289,"sku":"TW55es-Ready3up","price":20175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TW55esready3UP-1.jpg?v=1752779618"},{"product_id":"scm-linvincibile-tf-5-fixed-spindle-shaper-custom-ab00026061","title":"SCM L'invincibile TF 5 Fixed Spindle Shaper - Custom \"H-E Version\"","description":"\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF-5_H-E_version_QT.pdf?v=1760710050\" title=\"SCM TF 5 H-E Version quote template\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMachine configuration\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe L’invincibile TF 5 combines old world quality with new age technology. It comes standard with the \"Eye-S,\" a 15\" touch-screen control panel that gives you full control of up to 4 working axes: spindle height, shaft rotating speed, \"FAST\" table, and whole fence assembly. The Eye-S also has storage capacity for up to 1,000 programs and 1,000 tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \"FLEX\" fence can retract and be re-positioned on the worktable in one simple movement. It can also be moved away from the worktable if needed. Includes aluminum profiling fence with connecting bars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \"H-E version\" features an HSK 63B rapid tool changer for proper alignment, a 10HP electrospindle, an air blower system to maintain clean coupling surfaces, and an inverter for electronically programming the shaft's rotating speed (900 - 12,000 RPM).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\/protections on the TF 5 include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSpindle protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMechanical brake on main motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety sensors for changing tool operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRotating stop control, tool taper locking\/unlocking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety microswitch on motor access door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEmergency push buttons\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMain power switch can be locked in the off position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOverload switch protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e24V auxiliary low voltage circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\"Eye-S\" 15\" touch-screen display\u003c\/li\u003e\n\u003cli\u003eHSK 63B Spindle, 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eAir blower system to maintain clean coupling contact surfaces\u003c\/li\u003e\n\u003cli\u003e10HP electrospindle\u003c\/li\u003e\n\u003cli\u003eNo. 4 tool-holder shafts with HSK 63B taper\u003c\/li\u003e\n\u003cli\u003eFLEX fence with auto adjustment\u003c\/li\u003e\n\u003cli\u003eElectric presetting for feeder support\u003c\/li\u003e\n\u003cli\u003eManual vertical and horizontal feeder support\u003c\/li\u003e\n\u003cli\u003eReverse spindle rotation\u003c\/li\u003e\n\u003cli\u003e\"FAST\" section table with auto adjustment\u003c\/li\u003e\n\u003cli\u003eAuto star-delta start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor power:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e10hp (7.5 kW)\u003cbr\u003e\u003cstrong\u003eWorktable dimensions:\u003c\/strong\u003e 47.19\" x 28.69\" (1,200 x 730mm)\u003cbr\u003e\u003cstrong\u003eWorking length of spindle:\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eSpindle base projection from table:\u003c\/strong\u003e 2\" (52mm)\u003cbr\u003e\u003cstrong\u003eMax. tool dia. retractable (under table):\u003c\/strong\u003e 11.75\" x 3.31\" (300 x 85mm)\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 4.69\" (120mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V\/400V, 3-phase, 60 Hz (machine is 400V and includes an autotransformer for 220V - 400V)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*\u003c\/strong\u003eSubject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":47402007036121,"sku":"TF5-AB00026061","price":61830.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF5-1_73ae580f-ab92-45bb-862b-d291e2ddefbe.jpg?v=1760708288"},{"product_id":"scm-linvincibile-tf-5-fixed-spindle-shaper-custom-easy-top-version","title":"SCM L'invincibile TF 5 Fixed Spindle Shaper - Custom \"EASY TOP Version\"","description":"\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF-5_EASY_TOP_version_QT.pdf?v=1760711710\" title='TF-5 Shaper \"EASY TOP\" Version QT' rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMachine configuration\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe L’invincibile TF 5 combines old world quality with new age technology. It comes standard with the \"Eye-S,\" a 15\" touch-screen control panel that gives you full control of up to 4 working axes: spindle height, shaft rotating speed, \"FAST\" table, and whole fence assembly. The Eye-S also has storage capacity for up to 1,000 programs and 1,000 tools.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \"FLEX\" fence can retract and be re-positioned on the worktable in one simple movement. The entire fence can be moved with reference to the tool diameter. It can also be moved away from the worktable if needed. Includes aluminum profiling fence with connecting bars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis \"EASY TOP version\" features an auto adjusting feeder support controlled directly via the EYE-S panel. The feeder support can be adjusted vertically for precise positioning based on the thickness of the workpiece, as well as horizontally adjusted relative to the tool's diameter. There is an auto pneumatic locking system to ensure secure positioning, and the column support design allows the feeder to be easily swung or moved away from the table when not in use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn the TF 5 you will also find an HSK 63B rapid tool changer for proper alignment, a 10HP electrospindle, an air blower system to maintain clean coupling surfaces, and an inverter for electronically programming the shaft's rotating speed (900 - 12,000 RPM).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\/protections on the TF 5 include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSpindle protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMechanical brake on main motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety sensors for changing tool operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRotating stop control, tool taper locking\/unlocking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSafety microswitch on motor access door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEmergency push buttons\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMain power switch can be locked in the off position\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOverload switch protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e24V auxiliary low voltage circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\"Eye-S\" 15\" touch-screen display\u003c\/li\u003e\n\u003cli\u003eHSK 63B Spindle, 1-1\/4\"\u003c\/li\u003e\n\u003cli\u003eAir blower system to maintain clean coupling contact surfaces\u003c\/li\u003e\n\u003cli\u003e10HP electrospindle\u003c\/li\u003e\n\u003cli\u003eNo. 4 tool-holder shafts with HSK 63B taper\u003c\/li\u003e\n\u003cli\u003eFLEX fence with auto adjustment\u003c\/li\u003e\n\u003cli\u003eElectric presetting for feeder support\u003c\/li\u003e\n\u003cli\u003eManual vertical and horizontal feeder support\u003c\/li\u003e\n\u003cli\u003eReverse spindle rotation\u003c\/li\u003e\n\u003cli\u003e\"FAST\" section table with auto adjustment\u003c\/li\u003e\n\u003cli\u003eAuto star-delta start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor power:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e10hp (7.5 kW)\u003cbr\u003e\u003cstrong\u003eWorktable dimensions:\u003c\/strong\u003e 47.19\" x 28.69\" (1,200 x 730mm)\u003cbr\u003e\u003cstrong\u003eWorking length of spindle:\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eSpindle base projection from table:\u003c\/strong\u003e 2\" (52mm)\u003cbr\u003e\u003cstrong\u003eMax. tool dia. retractable (under table):\u003c\/strong\u003e 11.75\" x 3.31\" (300 x 85mm)\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 4.69\" (120mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 220V\/400V, 3-phase, 60 Hz (machine is 400V and includes an autotransformer for 220V - 400V)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*\u003c\/strong\u003eSubject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eOptional Accessories\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e The following accessories are optional and \u003cstrong\u003enot included with the machine\u003c\/strong\u003e. They can be purchased at any time, but you can also take advantage of Accessory Bundle Pricing (applicable only at the time of machine purchase). Call us at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e for more information and to place your order!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"LL\" Version for profiling\u003c\/strong\u003e\u003cbr\u003e-Includes (2) cast-iron worktable side extensions that are 2,500mm long, a front support bar to handle large workpieces, and an emergency push button.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarriage on fix table\u003c\/strong\u003e\u003cbr\u003e-For small tenoning operations. 60° swiveling fence complete with mobile stops, telescopic extension, and eccentric clamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeed 4i Power Feeder\u003c\/strong\u003e\u003cbr\u003e-3 phase, 4 roller feeder with DC brushless motor and swivel mechanism.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo.1 Tool-Holder Shaft w\/HSK 63B Taper\u003c\/strong\u003e\u003cbr\u003e-Includes the transponder for automatic tool detecting system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHSK 63B right taper tool with ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHSK 63B left taper tool with ring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobile trolley for tool-holder\u003c\/strong\u003e\u003cbr\u003e-Complete with two tool racks (5 slots each).\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":47402115170521,"sku":"TF5-AB00031281","price":62275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/TF5-1_73ae580f-ab92-45bb-862b-d291e2ddefbe.jpg?v=1760708288"},{"product_id":"mafell-hand-router-lo-65-ec-midimax-in-t-max-240-v","title":"Mafell LO 65Ec Hand Router MidiMAX in T-MAX (240V)","description":"\u003cp\u003eThe Mafell LO 65ec is a powerhouse of a router. With a 3.5HP, 240V high-output CUprex motor, this router's speed is continuously variable to suit a wide range of materials and cutter diameters. It also features a massive plunge depth of 2-1\/2\" with a revolving depth stop for repeatable cuts. From rounding edges and chamfering to rebating and shaping, the LO 65ec Hand Router is built for the most demanding woodworking tasks.\u003c\/p\u003e\n\u003cp\u003eThe LO 65ec is equipped with a motor brake and a safety switch that protects against accidental voltage loss, stopping the motor in seconds for maximum operator safety. Adjusting and setting the cutting depth is exceptionally precise thanks to a revolver-style depth stop and a micrometer fine-adjuster. Integrated dust extraction is highly efficient, featuring a quick-release catch and a 1.4\" (35mm) hose connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This router features a 240V motor.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePrecise routing up to 2-1\/2\" deep\u003c\/li\u003e\n\u003cli\u003ePowerful 240V CUprex motor with variable speed control up to 22,000 RPM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipped with a motor brake and safety switch\u003c\/li\u003e\n\u003cli\u003eScrew-fit baseplate with self-centering template guide seat\u003c\/li\u003e\n\u003cli\u003eMultiple locking actions for convenient and quick cutter changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutting depth:\u003c\/strong\u003e 0 to 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eNo load speed:\u003c\/strong\u003e 10,000 to 22,000 RPM\u003cbr\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 240V \/ 60 Hz\u003cbr\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 12.5 A\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 12.6 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter for M12x1 ARUNDA Bit\u003c\/li\u003e\n\u003cli\u003eCollet nut\u003c\/li\u003e\n\u003cli\u003eTemplate guide, 1-1\/8\"\u003c\/li\u003e\n\u003cli\u003eChip collector\u003c\/li\u003e\n\u003cli\u003eSingle-end spanner\u003c\/li\u003e\n\u003cli\u003eCord, 13.1 ft.\u003c\/li\u003e\n\u003cli\u003eT-MAX Carrying Case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":47727149613273,"sku":"91C723","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/91C723-1.jpg?v=1778532785"},{"product_id":"festool-cordless-edge-router-ofkc-500-r3-eb-basic","title":"Festool Cordless Edge Router OFKC 500 R3 EB-Basic","description":"\u003cp\u003eThe cordless edge router for hassle-free jobs. The Festool OFKC 500 Router features a well-balanced center of gravity and sleek design make for tilt-proof routing. The cordless drive gives you greater agility and flexibility. This router delivers precise and clean results thanks to a depth adjustment that's accurate to 1\/10mm and a stable connection between the router and the drive. Ideal for woodworkers, contractors, and remodelers doing rounding and chamfering work, as well as flush trimming edge banding and veneer.\u003c\/p\u003e\n\u003cp\u003eFine tune the cutting depth on the OFKC 500 in exact 1\/256\" (0.1mm) increments for flawless alignment. With the cutter mounted directly on the spindle, run-out accuracy is maximized for a clean finish. The flush ball bearing attachment keeps the height down to just 1\/2\" (12mm), giving you tighter clearances for rabbets or stacks of panels in confined spaces.\u003c\/p\u003e\n\u003cp\u003eRouter bits mount directly to the spindle for excellent run-out accuracy and professional-quality results. They can be replaced in seconds thanks to the push-button spindle stop. The clear dust extraction attachment captures shavings, while the spring-loaded ball bearing brake prevents burn marks for flawless surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_batteries-chargers\" target=\"_blank\" title=\"All Festool Batteries \u0026amp; Chargers\" rel=\"noopener\"\u003eBattery and charger\u003c\/a\u003e not included.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Dust Control:\u003c\/strong\u003e Bluetooth battery (sold separately) can activate a compatible Dust Extractor as soon as the router is turned on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Speed:\u003c\/strong\u003e Adjustable RPM reduces scorch marks and adapts to your material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCordless Freedom:\u003c\/strong\u003e Comfortably route edges without power cords holding you back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet Power:\u003c\/strong\u003e Brushless EC-TEC motor delivers efficiency with low noise and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Depth Setting:\u003c\/strong\u003e Easy adjustments to 1\/256\" (1\/10mm) for perfect cutting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Motor temperature monitoring extends life of router.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate Performance:\u003c\/strong\u003e Solid link between cutter and spindle ensures excellent run-out accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Bit Changes:\u003c\/strong\u003e Push-button spindle stop makes swapping cutters quick and simple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean \u0026amp; Controlled:\u003c\/strong\u003e Transparent dust extraction attachment with integrated ball bearing brake guides, slows, and captures chips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkpiece Protection:\u003c\/strong\u003e Hard fiber base material helps prevent scratches and glides smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIdle engine speed:\u003c\/strong\u003e 10,000 - 25,000 RPM\u003cbr\u003e\u003cstrong\u003eRouting depth adjustment range:\u003c\/strong\u003e 13\/32\" (10mm)\u003cbr\u003e\u003cstrong\u003eMax. bit diameter:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection diameter:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eBattery voltage:\u003c\/strong\u003e 18V\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.9 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRound Over Bit HW R3-OFK 500 Z1 (27mm diameter)\u003c\/li\u003e\n\u003cli\u003eBall Bearing Guide KLS-D 15.8-OFK\u003c\/li\u003e\n\u003cli\u003eDust extraction attachment\u003c\/li\u003e\n\u003cli\u003eSpring plate ball bearing brake\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":48709324832985,"sku":"577986","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577986-1_db8de1f1-9af5-427c-9884-689227437bde.jpg?v=1778781857"},{"product_id":"festool-cordless-modular-edge-router-mfkc-700-eb-basic","title":"Festool Cordless Modular Edge Router MFKC 700 EB-Basic","description":"\u003cp\u003eGet precise and clean edges with a router you can use anywhere, anytime. The Festool MFKC 700 Edge Router provides cordless freedom for flawless edges on wood, laminate, and edge banding. With a wide base and micro-adjustability, it is stable and accurate through any application. The modular design adapts to trimming, chamfering, and detailed edge work in seconds. Lightweight and balanced, this steady router is excellent for contractors, cabinet makers, and woodworkers who need professional-quality edge finishing with the freedom to work efficiently in the shop or directly on the jobsite.\u003c\/p\u003e\n\u003cp\u003eUsers can fine tune the routing depth on the MFKC 700 to 1\/256\" (0.1mm) for perfect alignment. An integrated clamp handle keeps the router firmly locked in place while you work. Different router bases can be mounted at 0° or 1.5° horizontally or vertically, with guiding systems integrated. Perfect for rounding, chamfering, profiling, and grooving—even on overhanging laminate boards and edge banding.\u003c\/p\u003e\n\u003cp\u003eThe brushless EC-TEC motor delivers efficiency while producing low noise and minimal vibration. Electronic control maintains RPM under load while temperature monitoring helps extend motor life, all while the variable speed adjusts to match the material  being routed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_batteries-chargers\" target=\"_blank\" title=\"All Festool Batteries \u0026amp; Chargers\" rel=\"noopener\"\u003eBattery and charger\u003c\/a\u003e not included.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet Power:\u003c\/strong\u003e Brushless EC-TEC motor delivers strong, consistent performance with less noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Intelligent electronics monitor motor temperature for long life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCordless Mobility:\u003c\/strong\u003e Route edges easily without a power cord getting in the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed Control:\u003c\/strong\u003e Variable speed matches bit speed to the material, reducing burn marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable:\u003c\/strong\u003e 5.1\" (130mm) wide base provides the stability needed for accurate routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Change bases without tools in seconds to adapt to nearly any task.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Bit Changes:\u003c\/strong\u003e Lock the spindle in place with the push of a button for easy router bit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Control:\u003c\/strong\u003e Adjust routing depth easily and accurately to 1\/256\" (0.1mm) for perfect alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Accepts a wide range of router bits with either 1\/4\" or 8mm shanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects Material:\u003c\/strong\u003e The hard fiber base glides smoothly and resists scratching to safeguard surface finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic:\u003c\/strong\u003e Slim, light, and well-balanced design for easy handling and steady guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner Workspace:\u003c\/strong\u003e Optimally-designed dust extraction channel captures chips as they are created.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eIdle engine speed:\u003c\/strong\u003e 10,000 to 25,000 RPM\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 9\/16\" (14mm)\u003cbr\u003e\u003cstrong\u003eCollet diameter:\u003c\/strong\u003e 1\/4\" \u0026amp; 8mm\u003cbr\u003e\u003cstrong\u003eMax. bit diameter:\u003c\/strong\u003e 1\" (26mm)\u003cbr\u003e\u003cstrong\u003eDust extraction diameter:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 18V\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.75 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" clamping collet\u003c\/li\u003e\n\u003cli\u003e8mm clamping collet\u003c\/li\u003e\n\u003cli\u003eCollet wrench\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":48709948080345,"sku":"578012","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/578012-1.jpg?v=1778851056"},{"product_id":"festool-router-of-1400-eq-f-plus","title":"Festool Router OF 1400 EQ-F-Plus","description":"\u003cp\u003eNow includes Dust Extraction Hood w\/Integrated Light Module!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-3\/4\" plunge depth capacity\u003c\/li\u003e\n\u003cli\u003eMicro-adjustable depth control to 1\/256\" (1\/10 mm) with ball detents for absolute precision\u003c\/li\u003e\n\u003cli\u003eMMC electronics provide constant speed under load for improved cut quality, step-less variable speed, and overload protection\u003c\/li\u003e\n\u003cli\u003eTemplate guide bushings are self-centering and can be inserted without tools\u003c\/li\u003e\n\u003cli\u003eCenter line on each side of the base acts as a visual reference point to align the the bit with the cut line\u003c\/li\u003e\n\u003cli\u003eIncludes three collet sizes (1\/2\", 1\/4\", and 5\/16\") and a chip catcher\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFestool's most versatile router. The OF 1400 provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1\/2\", 1\/4\", or 8mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every tradesperson should own. With a category-leading 2-3\/4\" plunge depth, precise to 1\/256\" (1\/10 mm), this router gives you the power, precision, depth of cut, and dust extraction capabilities that will simplify your routing tasks.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe ergonomic handle with full-grip is designed for increased control and reduced fatigue with power switch and speed control at the fingertips. The OF 1400 EQ Router provides a smooth 2-3\/4\" plunge action on precision ground rods and a double column clamp with a quick and secure plunge lock.\u003c\/p\u003e\n\u003cp\u003eMicro-adjustable depth control to 1\/256\" (1\/10 mm) with ball detents which allows you to dial in your routing with tremendous precision. MMC electronic controls provide constant speed under load for improved cut quality, step-less variable speed, and overload and thermal protection.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBrowse our large selection of \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/router-bits-menu\" title=\"All Router Bits\" target=\"_blank\"\u003erouter bits\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e With 1400 watts and MMC electronic controls, the OF 1400 is a mid-sized router with enough power to tackle even your largest projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRatcheting Spindle:\u003c\/strong\u003e One wrench bit changes with ratcheting action for faster and easier bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Column Clamping:\u003c\/strong\u003e One knob locks the plunge depth securely, for less motor to plate deflection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Extraction:\u003c\/strong\u003e Integrated dust extraction port extracts dust from the point of generation, increasing visibility and saving valuable clean-up time. The port is angled so that the hose stays in line with the power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Depth Adjustment:\u003c\/strong\u003e Micro-adjustability to 1\/256\" (1\/10 mm) with detents for each 1\/10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwiveling Chip Deflector:\u003c\/strong\u003e Included chip deflector can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Less Inserts:\u003c\/strong\u003e Template guide bushings are self-centering and can be inserted tool-free. The swiveling chip deflector can also be attached and removed without tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-3\/4\" Plunge Depth:\u003c\/strong\u003e Enhanced depth is especially useful when routing on top of a template\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration:\u003c\/strong\u003e Designed for use with the FS guide rail system for guided cutting, VS 600 Dovetail jig for joinery applications, LR32 hole drilling system, MFS multirouting templates, and a wide range of other accessory options\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Stop Turret:\u003c\/strong\u003e Three adjustable position depth stop turret for repeatable and consistent step cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad Center Line Marks:\u003c\/strong\u003e As with all Festool routers, the OF 1400 EQ has a center line indention on each side of the base. This visual reference point allows you to align the center of the bit with the cut line. No more guessing where the center of the bit falls on your workpiece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMC Electronics:\u003c\/strong\u003e Electronic controls provide constant speed under load for improved cut quality, step-less variable speed for different applications, and overload protection for longer life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Extraction \u0026amp; Light Module:\u003c\/strong\u003e Integrated dust extraction hood + light module accessory collects chips at the source of the cut and provides shadow-free 360° lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRouting stroke:\u003c\/strong\u003e 2-3\/4\" (70mm)\u003cbr\u003e\u003cstrong\u003eMax. cutter diameter:\u003c\/strong\u003e 2-1\/2\" (63mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.92 lbs. (4.5 kg)\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\u003cstrong\u003eCollet dia.:\u003c\/strong\u003e 1\/4\" - 1\/2\" (6 - 12.7mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 1 400 watt\u003cbr\u003e\u003cstrong\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\"\/1-7\/16\" (27\/36mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eChip Catcher\u003c\/li\u003e\n\u003cli\u003eLM-OF 1400 Router Light Module\u003c\/li\u003e\n\u003cli\u003e1\/2\" Clamping Collet (12.7mm)\u003c\/li\u003e\n\u003cli\u003e1\/4\" Clamping Collet (6.35mm)\u003c\/li\u003e\n\u003cli\u003e5\/16\" Clamping Collet (8mm)\u003c\/li\u003e\n\u003cli\u003eOpen-Ended Spanner, WAF 24\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":48712625127641,"sku":"578951","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/578951-1.jpg?v=1778869047"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/routers-shapers-menu\/brand_mafell.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}