{"title":"Planers","description":"","products":[{"product_id":"powermatic-15-helical-head-planer","title":"Powermatic 15HH 15\" Helical Head Planer","description":"\u003cp\u003eBuilt for woodworkers who value precision and durability, the Powermatic 15\" Helical Head Planer delivers consistent results for all your planing needs. With a 3HP motor and 6\" maximum board thickness, users get the power and capacity needed for flattening rough lumber, reducing stock to final thickness, and handling demanding milling tasks with confidence.\u003c\/p\u003e\n\u003cp\u003eThe helical cutterhead on the Powermatic 15HH uses 74 four-sided carbide knife inserts to produce a smoother finish and quieter operation compared to conventional straight knives. These indexable knives do not require adjustment and can be rotated to extend cutter life.\u003c\/p\u003e\n\u003cp\u003eYour workpiece will get substantial support from the precision-ground cast-iron table and two large extension wings. The two-speed gearbox with automatic chain tensioner allows operators to dial in feed rate and finish quality, while steel infeed and outfeed rollers ensure positive feeding and consistent thicknessing with up to 1\/8\" depth of cut.\u003c\/p\u003e\n\u003cp\u003eAll Powermatic Machinery includes a 5-Year Warranty.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHelical cutterhead with 74 four-sided carbide knife inserts delivers smoother, quieter finishes and reduced tear-out compared to straight knives\u003c\/li\u003e\n\u003cli\u003e3HP, 230V single-phase motor with triple V-belts provides consistent power transfer for demanding, professional planing applications\u003c\/li\u003e\n\u003cli\u003eIndexable carbide inserts require no height adjustment, minimizing setup time and extending cutter life\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron table with large extension wings ensures accurate, stable support for long and wide workpieces\u003c\/li\u003e\n\u003cli\u003eTwo-speed gearbox with automatic chain tensioner lets operators balance feed rate, surface finish, and material removal with ease\u003c\/li\u003e\n\u003cli\u003eHeavy-duty welded steel stand with lockable casters delivers rock-solid stability while allowing convenient repositioning around the shop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Helical\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,500 RPM\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 2-7\/8\"\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e (74) Four-Sided Carbide Helical Inserts\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 14-7\/8\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 16\/20 FPM\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 48\" x 15\"\u003cbr\u003e\u003cstrong\u003eTable Size with Extensions (L x W):\u003c\/strong\u003e 15\" x 48\"\u003cbr\u003e\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Column\u003cbr\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 2-3\/16\"\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection:\u003c\/strong\u003e 800 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3HP\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 A\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/SNSPo966xFg?si=OHCHrA0JsJ8zvZeR\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":1318070056,"sku":"PM9-1791213","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791213_main.jpg?v=1748888371"},{"product_id":"powermatic-209hh-20-helical-head-planer-5hp-1ph-230v","title":"Powermatic 209HH 20\" Helical Head Planer 5hp, 1PH, 230V","description":"\u003cp\u003eThis heavy-duty planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20\" planing capacity will handle the most demanding work. The helical cutterhead provides quieter operation and finer finishing than conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge.\u003c\/p\u003e\n\u003cp\u003eThe 5\" dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table, and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM.\u003c\/p\u003e\n\u003cp\u003eThe corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron head\u003c\/li\u003e\n\u003cli\u003eCast iron table with extensions creates a big 55-1\/2\" x 20\" working area\u003c\/li\u003e\n\u003cli\u003eChip breaker and pressure bar assists to reduce snipe\u003c\/li\u003e\n\u003cli\u003eChrome-plated, ergonomic handwheel makes adjustments smooth and easy\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly for rigidity\u003c\/li\u003e\n\u003cli\u003eFully enclosed base cabinet with integrated casters for shop mobility\u003c\/li\u003e\n\u003cli\u003eSerrated steel infeed roller and smooth steel outfeed roller allows for 1\/8\" maximum depth of cut and trouble-free operation\u003c\/li\u003e\n\u003cli\u003eThe helical cutterhead with 100 four-sided carbide knife inserts provides smoother, quieter cutting and finer finish than conventional systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 20,000\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-3\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Required (min.):\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 24\/31 FPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 3\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 20\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 6-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 40 Amps\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 25-3\/4\u003cspan\u003e\"\u003c\/span\u003e x 20\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Column\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e HELICAL\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":16279791749,"sku":"PM9-1791315","price":6269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791315-1.jpg?v=1748888369"},{"product_id":"jet-8-jointer-planer-combo","title":"JET JJP-8BT 8\" Jointer\/Planer Combo","description":"\u003cp\u003eDesigned with the space limitations faced by many of today's woodworkers, the JET 8\" Jointer\/Planer packs the capabilities of the jointer and planer into a single, space-saving footprint. Combining the jointer and planer, two of the most-used core woodworking machines also saves money.\u003c\/p\u003e\n\u003cp\u003eThe precision machined, all-steel cutterhead is equipped with two high-quality knives. The knives are made from premium steel so they take and hold a sharp edge. The knives are retained with tried and true wedge blocks and gib screws. A jackscrew is located at each end of the knives to make setting critical heights easier and more accurate. A knife setting gauge is also provided to make setting the knives fast and easy.\u003c\/p\u003e\n\u003cp\u003eA 29\" x 8-1\/4\" cast aluminum jointing table is precisely machined to be flat and smooth. The JET 8\" Jointer\/Planer is capable of a maximum cut depth of 1\/8\" with the cut adjusted using a single knob at the end of the infeed table. A handy cut depth gauge is provided at the front edge of the infeed table. The infeed table is locked in position with a pair of finger-operated knobs.\u003c\/p\u003e\n\u003cp\u003eThe planer table surface is 17-1\/2\" long (with the included extension table) by 8-1\/2\" wide. The table is raised and lowered with a hand crank that plugs into the top of the JET 8\" Jointer\/Planer. A handy scale next to the planer infeed opening shows the current table to knife distance and makes setup fast and easy. The planer table moves up and down on four lead screws, one in each corner of the main cabinet for maximum stability. The table is secured for making cuts with a single locking handle.\u003c\/p\u003e\n\u003cp\u003eThe JET 8\" Jointer\/Planer comes with a single dust shroud assembly that can be installed for either jointing or planer functions. This chute is attached using finger-operated knobs that make installation fast and tool free. The dust shroud is also designed as a safety interlock for the jointer-planer. This means the machine will not operate unless the dust shroud is installed in either the jointing or planning mode.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eGet the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-universal-benchtop-machine-stand\" title=\"JET Universal Benchtop Machine Stand product page\" target=\"_blank\"\u003eUniversal\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-flip-top-benchtop-machine-table\" title=\"JET Flip Top Benchtop Machine Table product page\" target=\"_blank\"\u003eFlip Top\u003c\/a\u003e stands to optimize your 8\" Jointer\/Planer.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCombination bench top jointer and planer provides a 2-in-1 machine to maximize workspace\u003c\/li\u003e\n\u003cli\u003eCompact bench top design fits conveniently in small shop environments\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 13 Amp motor for various cutting applications\u003c\/li\u003e\n\u003cli\u003eIntegrated cord wrap makes transporting easy and ensures workshop safety\u003c\/li\u003e\n\u003cli\u003eLarge aluminum extruded fence\u003c\/li\u003e\n\u003cli\u003eOversized, ergonomic knobs provide ease of use and maximum control\u003c\/li\u003e\n\u003cli\u003ePlaning and joining tables lock\u003c\/li\u003e\n\u003cli\u003ePrecision machined table top ensures a smooth, straight cut\u003c\/li\u003e\n\u003cli\u003eSheet metal out feed table with height adjustment supports long work pieces and helps reduce snipe\u003c\/li\u003e\n\u003cli\u003eTwo high speed steel knives for smooth cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 9,000 RPM\u003cbr\u003e\u003cstrong\u003eNumber of knives:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eCutter knife length:\u003c\/strong\u003e 8-1\/4\"\u003cbr\u003e\u003cstrong\u003eCutter knife thickness:\u003c\/strong\u003e 0.060\"\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 2-1\/2\" or 4\"\u003cbr\u003e\u003cstrong\u003eJointer table:\u003c\/strong\u003e 29\" x 8-1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMax. cutting width:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e 4-1\/8\" x 21\"\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 90° - 45° R\u003cbr\u003e\u003cstrong\u003ePlaner table:\u003c\/strong\u003e 10-5\/8\" x 8-1\/2\"\u003cbr\u003e\u003cstrong\u003eMax. cutting thickness:\u003c\/strong\u003e 4-1\/2\"\u003cbr\u003e\u003cstrong\u003eMax. depth of cut:\u003c\/strong\u003e 5\/64\"\u003cbr\u003e\u003cstrong\u003eMin. length of work piece:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eFeed rate:\u003c\/strong\u003e 19.5 fpm\u003cbr\u003e\u003cstrong\u003eMotor voltage:\u003c\/strong\u003e 120V, 60 Hz, 13A\u003cbr\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 31\" x 16-1\/2\" x 18-1\/2\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 58 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":32102173321,"sku":"JT9-707400","price":711.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/707400-1.jpg?v=1748882606"},{"product_id":"scm-nova-s520-planer","title":"SCM Nova S 520 - Tersa 20\" Planer","description":"\u003c!-- ============================================================\n     SCM Nova S 520 T — Shopify Product Description v1\n     Paste into Products \u003e Description \u003e Source (\u003c\u003e) view\n\n     TITLE TAG (68 chars):\n     SCM Nova S 520 T | 20\" Tersa Planer | 11 HP 3-Phase | OakTree Supply\n\n     META DESCRIPTION (147 chars):\n     Made in Italy. SCM Nova S 520 T — 20.5\" industrial planer, 11 HP 3-phase, Tersa cutterhead, monoblock base, powered table lift. Freight included.\n\n     NOTE: Section 179 calculator link to be added manually by Sara.\n     NOTE: No Optional Installation \u0026 Training tab on this page.\n     NOTE: Cross-reference links to SCM jointers to be added manually by Sara.\n     ============================================================ --\u003e\n\n\u003cp\u003eThe SCM Nova S 520 T is a 20\" industrial planer built in Italy — 11 HP 3-phase motor, monoblock welded base, powered table lift with digital readout, and a Tersa cutterhead with 4 straight knives. It is built for cabinet shops, millwork operations, professional furniture makers, and serious woodworkers who need a planer running at real production volume and want the best possible surface straight off the machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRequires 3-phase power (220V, 25A circuit). Confirm service availability before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTersa cutterhead — 4 straight knives, 520mm:\u003c\/strong\u003e Centrifugal locking — knives seat automatically when the machine starts, no tools required. Each knife is double-sided — rotate once before replacing. Change time under a minute per knife. Multiple alloy options including HSS and M42 cobalt for abrasive and resinous species.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest surface finish in the lineup:\u003c\/strong\u003e Tersa produces the finest surface straight off the machine when knives are sharp. The choice for artisan shops, fine furniture, and anyone where surface quality is the priority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20.5\" (520mm) working width:\u003c\/strong\u003e Handles lumber and edge-glued panels up to 20.5\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 HP, 3-phase, 220V:\u003c\/strong\u003e Purpose-built production motor. 25A circuit required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered table lift with digital readout:\u003c\/strong\u003e 2-speed powered bed movement with micrometric fine adjustment. Set thickness precisely and use the readout as a reliable reference when returning to a previously used dimension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock welded base, heat-treated:\u003c\/strong\u003e Single normalized steel structure — all machine components mount and reference to one frame. The structural reason original S 520s from the 1990s are still holding tolerance in working shops today.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-thread jack screws:\u003c\/strong\u003e Acme threads distribute load across a wider contact face than standard V-threads, resisting wear and table deflection under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 fixed feed speeds — 16, 26, 39, 59 FPM:\u003c\/strong\u003e Two speeds for rough stock removal; two for finish passes on demanding grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable idle bed rollers:\u003c\/strong\u003e Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where surface quality is the priority.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e6\" (150mm) dust port, 754 CFM minimum.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA planer's job is to thickness lumber and edge-glued panels to a consistent, accurate dimension — without snipe, without compression marks, and without variation across the width of the board. The Nova S 520 T is built around structural decisions that directly address those outcomes. Understanding them explains why this machine behaves differently from lighter-duty planers at any price point.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTersa Cutterhead: \u003c\/strong\u003eThe Tersa system uses four straight knives that lock by centrifugal force when the machine starts — no wrenches, no setting, no torque sequence. Slide the knife into its holder, start the machine, and centrifugal force seats it. Change time is under a minute per knife. When a knife dulls, it comes out in seconds and a fresh one goes in just as fast. Each knife is double-sided — rotate it once before replacing to get full use out of every edge. The result is a head that is almost never running on tired edges, which is exactly why Tersa produces the finest surface finish in this lineup. Sharp knives and fast changes keep surface quality consistent throughout the workday rather than degrading gradually between changes. Multiple knife alloys are available — standard HSS for everyday work, M42 cobalt for abrasive or resinous species where HSS dulls more quickly. Replacement knives can be ordered from OakTree at the time of purchase or on an as-needed basis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMonoblock Base: \u003c\/strong\u003eThe SCM Nova S 520 is manufactured in Italy, and the monoblock base is central to how SCM builds this machine to last. It is a single welded steel structure that undergoes normalization — a heat treatment process that relieves internal stress and stabilizes the metal. Every mechanism on the machine mounts and references to this single structure. With a machine built on a bolted or multi-piece frame, each component references to a different casting or weldment. Those joints shift under sustained load and vibration over time. With a monoblock base, there is no joint to shift. It is why S 520s built in the 1990s are still holding tolerance in working shops today.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAcme-Thread Jack Screws: \u003c\/strong\u003eThe table rides on four Acme-threaded jack screws. Acme threads have a trapezoidal profile that distributes load across a wider contact face than the V-shaped profile of standard threads. Under continuous heavy use, this geometry wears more evenly and maintains table stability longer. SCM's design also prevents chain drive pressure from transferring directly to the jack screw shaft — eliminating a secondary source of table movement that contributes to snipe over the machine's life.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnecting Rod Roller System: \u003c\/strong\u003eBoth the infeed and outfeed rollers are mounted at the end of pivoting arms rather than on fixed axles. On a conventional planer, the infeed roller sits on a fixed shaft pressed downward by spring tension. As the board's leading edge pushes under it, the roller lifts straight up against that resistance — pressure is momentarily uneven and the board can hesitate or receive a compression mark from the infeed roller at entry. On the Nova S 520, each roller swings up along the arc of the connecting rod's pivot point rather than pushing straight up against fixed resistance. Pressure stays consistent through the full entry and exit — the board feeds through without hesitation and the roller leaves no entry or exit marks on the surface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIdle Bed Rollers: \u003c\/strong\u003eTwo adjustable idle rollers are set into the cast iron table and controlled by a lever on the infeed side of the bed. When raised slightly above the table surface, they allow rough, heavy, or wet lumber to feed through on initial passes without fighting resistance across the full table length. For finish passes, lower them flush with the table — the board then rides the full cast iron surface, which is the more stable reference for final thickness and surface quality. If you are getting snipe on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003eThe four fixed speeds reflect how thicknessing work actually gets done. Rough stock comes off the saw with surface variability — in the early passes you are removing material unevenly. Running at 39 or 59 FPM through those passes is efficient. Once the board is consistent and you are working toward final dimension, 16 or 26 FPM gives a cleaner surface with less tearout on difficult grain. Match the speed to the stage of the work.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePowered Table Lift: \u003c\/strong\u003eTwo-speed powered bed movement — fast for coarse positioning, slow for the micrometric fine adjustment needed to dial in a precise final thickness. The digital readout gives you a reliable reference to return to when running repeat dimensions. You set the dimension and note the readout; returning to it requires dialing back to that number manually.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDust Extraction: \u003c\/strong\u003e6\" (150mm) port. Minimum 754 CFM required. This machine produces shavings at volume — make sure your collection system is genuinely up to the task before the machine arrives.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo You Have a Jointer?\u003c\/strong\u003e A planer requires a flat reference face to work against. Without one, the planer reproduces any bow or twist in the lumber at consistent thickness rather than correcting it. If you do not have a jointer, the SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate machines to pair with this one.\u003c\/p\u003e\n\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this machine require 3-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Nova S 520 T is a 3-phase only machine — 220V, 11 HP, 25A circuit. There are no single-phase variants in the Nova standalone planer lineup. Confirm 3-phase service availability, your panel's available amperage, and that you can run a 25A circuit to the machine's location before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSCM Nova S 520 Tersa vs Xylent: which cutterhead should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTersa for cut quality. Xylent for production volume and lower maintenance frequency. Per SCM's own specs, the Xylent head runs 4dB quieter than Tersa — a difference most operators consider marginal. Tersa's advantage is surface finish: sharp straight knives produce the finest surface straight off the machine, and the fast knife change system means fresh edges are never more than a minute away. Where Xylent earns its place is in shops processing high volume on abrasive or resinous species, where carbide insert life significantly outlasts HSS knives and the finer chip output keeps dust collection running more efficiently over long sessions. For a shop where the best possible surface is the priority, Tersa is the stronger choice. The Nova S 520 X is the same machine with an SCM Xylent cutterhead.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat causes snipe, and how does this machine address it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSnipe — the slight over-cut at the leading and trailing ends of a board — is primarily a function of table stability and roller behavior as the board enters and exits the cutterhead. The Nova S 520 addresses both: Acme-thread jack screws resist table movement under sustained load better than standard threads, and the connecting rod roller system keeps feed pressure consistent through the full entry and exit rather than momentarily uneven as the roller lifts. With proper setup, snipe on this machine is minimal. Lower the bed rollers flush with the table for finish passes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat dust collection do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e754 CFM minimum through a 6\" (150mm) port. This machine produces shavings quickly — verify your collector's rated output and that your ductwork is sized for a 6\" connection before delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need a jointer to use this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, in practical terms. A planer references off the bottom face of the board. If that face has any bow or twist, the planer reproduces that geometry at consistent thickness — it does not correct it. A jointer establishes the flat reference face the planer works against. Without one, you cannot produce truly flat, dimensioned stock from rough lumber. The SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate jointers to pair with this machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSCM Nova S 520 vs SCMI S 520: what changed?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Nova S 520 descends from the same design platform. The Nova version adds powered table lift, digital readout, and updated electronics that the older machines lacked. The community regards both generations highly — the pre-Nova machines are regularly cited on forums as machines people have run flawlessly for 20-plus years. The Nova adds meaningful daily-use convenience. The core structural advantages — monoblock base, Acme-thread jack screws, connecting rod roller system — carry forward from the original design.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the minimum stock size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum thickness is 0.12\" (3.5mm). Minimum length is 8.7\". Maximum working thickness is 11.75\" (300mm).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs shipping included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is included.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Nova S 520 T qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. [link: See how much you could save with our Section 179 calculator. \/pages\/section-179]\u003c\/p\u003e\n\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTersa Cutterhead — 4 Straight Knives, 520mm: \u003c\/strong\u003eCentrifugal locking — knives seat automatically on startup, no tools or setting required. Change time under a minute per knife. Each knife is double-sided — rotate once before replacing to get full use out of every edge. Multiple alloy options: HSS for everyday work, M42 cobalt for abrasive and resinous species. Replacement knives available from OakTree.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock Welded Base, Heat-Treated: \u003c\/strong\u003eSingle normalized steel structure — all machine components mount and reference to one fixed frame. No multi-piece frame joints to shift under sustained load and vibration over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-Thread Jack Screws with Dust Protection: \u003c\/strong\u003eAcme threads distribute load across a wider contact face than standard V-threads, resisting wear and maintaining table stability under continuous production use. SCM's design prevents chain drive pressure from transferring directly to the jack screw shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting Rod Roller System — Infeed and Outfeed: \u003c\/strong\u003eEach roller mounts at the end of a pivoting arm. As the board engages the roller, it swings up along an arc rather than lifting straight against fixed spring resistance. Consistent feed pressure through the full entry and exit — no hesitation, no compression marks from the infeed roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Idle Bed Rollers: \u003c\/strong\u003eTwo idle rollers set into the cast iron table, controlled by a lever on the infeed side. Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where the full cast iron surface provides the more stable reference. If snipe appears on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered Table Lift, 2-Speed with Micrometric Adjustment: \u003c\/strong\u003eFast mode for coarse positioning; slow mode for fine adjustment to a precise final dimension. Digital readout for reliable reference when returning to a previously used thickness setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Fixed Feed Speeds — 16, 26, 39, 59 FPM: \u003c\/strong\u003eTwo production speeds for initial stock removal on rough lumber; two precision speeds for finish passes on demanding grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelicoidal Steel Infeed Roller, Power-Driven: \u003c\/strong\u003eConsistent grip across the full 20.5\" working width through dense hardwoods and heavy stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-Coated Outfeed Roller, Power-Driven: \u003c\/strong\u003eClean release without marring the planed surface. Field-interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" (150mm) Dust Port: \u003c\/strong\u003eMinimum 754 CFM required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 11 HP (8 kW), 3-phase, 220V\u003cbr\u003e\n\u003cstrong\u003eCircuit Required:\u003c\/strong\u003e 25A, 3-phase\u003cbr\u003e\n\u003cstrong\u003eWorking Width:\u003c\/strong\u003e 20.5\" (520mm)\u003cbr\u003e\n\u003cstrong\u003eTable Length:\u003c\/strong\u003e 35.37\" (900mm)\u003cbr\u003e\n\u003cstrong\u003eMax Working Thickness:\u003c\/strong\u003e 11.75\" (300mm)\u003cbr\u003e\n\u003cstrong\u003eMin Working Thickness:\u003c\/strong\u003e 0.12\" (3.5mm)\u003cbr\u003e\n\u003cstrong\u003eMin Stock Length:\u003c\/strong\u003e 8.7\"\u003cbr\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Tersa — 4 straight knives, 520mm\u003cbr\u003e\n\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,500 RPM\u003cbr\u003e\n\u003cstrong\u003eFeed Speeds:\u003c\/strong\u003e 16, 26, 39, 59 FPM (5, 8, 12, 18 m\/min)\u003cbr\u003e\n\u003cstrong\u003eInfeed Roller:\u003c\/strong\u003e Helicoidal steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eOutfeed Roller:\u003c\/strong\u003e Rubber-coated steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eBed Rollers:\u003c\/strong\u003e 2 adjustable idle rollers, standard\u003cbr\u003e\n\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Acme-thread jack screws with dust protection\u003cbr\u003e\n\u003cstrong\u003eTable Lift:\u003c\/strong\u003e Powered, 2-speed with micrometric adjustment and digital readout\u003cbr\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Monoblock welded steel, heat-treated (normalized)\u003cbr\u003e\n\u003cstrong\u003eDust Port:\u003c\/strong\u003e 6\" (150mm)\u003cbr\u003e\n\u003cstrong\u003eDust Extraction Minimum:\u003c\/strong\u003e 754 CFM (1,300 m³\/h)\u003cbr\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 44.9\" W × 39.5\" D × 47.4\" H (1,140 × 1,003 × 1,204mm)\u003cbr\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,587 lbs (720 kg)\u003cbr\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 1,737 lbs (788 kg)\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4 Tersa knives, 520mm (installed)\u003c\/li\u003e\n\u003cli\u003e2 adjustable idle bed rollers (installed)\u003c\/li\u003e\n\u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003cli\u003eTool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment\u003c\/strong\u003e — Machine is in OakTree's warehouse and ships within normal lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock \/ Low stock as of [date]\u003c\/strong\u003e — Machine is in the manufacturer's U.S. warehouse. Typical lead time 3–5 business days to OakTree, then ships to customer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]\u003c\/strong\u003e — Machine is not yet in a U.S. warehouse. Estimated date reflects current manufacturer guidance and is subject to change.\u003c\/p\u003e\n\u003cp\u003eDates are estimates only and are not guaranteed. OakTree Supply is not responsible for delays in transit or delays caused by the manufacturer or freight carrier.\u003c\/p\u003e\n\n[\/TABS]","brand":"SCM","offers":[{"title":"Default Title","offer_id":19490266415222,"sku":"NovaS520T","price":15475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/NovaS520X-1_1dd77688-60e6-4fd7-9b59-1c130bdf7069.jpg?v=1677527975"},{"product_id":"scm-class-s630-planer","title":"SCM Class S 630 - Xylent 24\" Planer","description":"\u003c!-- ============================================================\n     SCM Class S 630 X — Shopify Product Description v1\n     Paste into Products \u003e Description \u003e Source (\u003c\u003e) view\n\n     TITLE TAG (64 chars):\n     SCM Class S 630 X | 24.8\" Xylent Planer | 14 HP | OakTree Supply\n\n     META DESCRIPTION (150 chars):\n     Made in Italy. SCM Class S 630 X — 24.8\" planer, 14 HP 3-phase, 105-insert Xylent cutterhead, variable feed speed, monoblock base. Freight included.\n\n     NOTE: Section 179 calculator link to be added manually by Sara.\n     NOTE: No Optional Installation \u0026 Training tab on this page.\n     NOTE: Cross-reference links to SCM jointers to be added manually by Sara.\n     ============================================================ --\u003e\n\n\u003cp\u003eThe SCM Class S 630 X is a 24.8\" industrial planer built in Italy — 14 HP 3-phase motor, monoblock welded base, fully variable inverter-controlled feed speed, and an SCM Xylent cutterhead with 105 carbide inserts. It is built for millwork shops, cabinet operations, and professional woodworkers who regularly process lumber and edge-glued panels beyond the 20\" range and need precise feed control across variable stock conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRequires 3-phase power (220V, 49A circuit). Confirm service availability and panel capacity before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24.8\" (630mm) working width:\u003c\/strong\u003e Handles lumber and edge-glued panels up to 24.8\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 HP, 3-phase, 220V:\u003c\/strong\u003e Purpose-built production motor. 49A circuit required — confirm panel capacity before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSCM Xylent cutterhead — 105 carbide inserts across the full 24.8\" working width:\u003c\/strong\u003e 15×15×2.5mm carbide, four cutting edges per insert. Spiral geometry reduces noise and produces fine chips. Carbide holds its edge significantly longer than HSS on abrasive and resinous species.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully variable inverter-controlled feed speed, 13–66 FPM:\u003c\/strong\u003e Dial any speed across the full range rather than choosing between fixed steps. Match feed rate precisely to species, removal depth, and material condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSectioned steel infeed roller:\u003c\/strong\u003e Standard on the S 630. Independent sections apply consistent feed pressure across the full width even when boards of varying thickness feed side by side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered table lift with digital readout:\u003c\/strong\u003e 2-speed powered bed movement with micrometric fine adjustment. Set thickness precisely and use the readout as a reliable reference when returning to a previously used dimension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock welded base, heat-treated:\u003c\/strong\u003e Single normalized steel structure — all machine components mount and reference to one frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-thread jack screws:\u003c\/strong\u003e Acme threads distribute load across a wider contact face than standard V-threads, resisting wear and table deflection under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable idle bed rollers:\u003c\/strong\u003e Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where surface quality is the priority.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e6\" (150mm) dust port, 754 CFM minimum.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA planer's job is to thickness lumber and edge-glued panels to a consistent, accurate dimension — without snipe, without compression marks, and without variation across the width of the board. The Class S 630 X is built around the same structural foundation as the Nova S 520, and adds two capabilities that matter in a production environment: fully variable feed speed and a sectioned infeed roller standard.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVariable Inverter Feed Speed: \u003c\/strong\u003eThe Nova S 520 offers four fixed feed speeds — useful, but a compromise at any point between those steps. The Class S 630 replaces fixed speeds with a fully variable inverter that covers 13–66 FPM continuously. In practice, this means the operator sets the exact feed rate that suits the combination of species, grain direction, and removal depth rather than choosing the closest available option. Fine-grained hardwoods like hard maple or cherry want a slow, deliberate pass at higher removal depths. Dimensional softwood for rough dimensioning can run at the upper end of the range. With four fixed speeds, you accept the compromise closest to what you need. With variable speed, you run the right speed every time. Over a full production day across varied stock, this precision adds up to more consistent surface quality and better throughput.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSectioned Steel Infeed Roller: \u003c\/strong\u003eA solid infeed roller applies the same downward pressure across its full width. When two boards of slightly different thickness feed side by side — common in any batch of rough-sawn stock — the solid roller bridges to the thicker board and loses grip on the thinner one. Feed becomes inconsistent and the thinner board may not feed reliably at all. The sectioned roller divides into independent sections along its width, each yielding independently to whatever material is beneath it. Two boards of different thicknesses feed simultaneously with consistent pressure applied to each. This is why the S 630 handles rough stock batches more reliably than a machine with a solid roller. If your operation requires a different infeed roller configuration — rubber-coated or dual-rubber-layer for delicate or finished surfaces — that is a factory special order. Contact OakTree for a quote and lead time to place your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMonoblock Base: \u003c\/strong\u003eThe SCM Class S 630 is manufactured in Italy, and the monoblock base is central to how SCM builds this machine to last. It is a single welded steel structure that undergoes normalization — a heat treatment process that relieves internal stress and stabilizes the metal. Every mechanism on the machine mounts and references to this single structure. With a machine built on a bolted or multi-piece frame, each component references to a different casting or weldment. Those joints shift under sustained load and vibration over time. With a monoblock base, there is no joint to shift.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAcme-Thread Jack Screws: \u003c\/strong\u003eThe table rides on four Acme-threaded jack screws. Acme threads have a trapezoidal profile that distributes load across a wider contact face than the V-shaped profile of standard threads. Under continuous heavy use, this geometry wears more evenly and maintains table stability longer. SCM's design also prevents chain drive pressure from transferring directly to the jack screw shaft — eliminating a secondary source of table movement that contributes to snipe over the machine's life.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAutomatic Star-Delta Motor Start: \u003c\/strong\u003eA 14 HP motor draws significant inrush current at startup. The Class S 630 uses an automatic star-delta starter to manage this. The motor starts in star configuration — lower voltage, reduced torque, lower current draw — then transitions automatically to delta configuration once it reaches operating speed. This reduces the startup surge on the shop's electrical system and protects the motor from the stress of a direct-on-line start. At shops running multiple large motors on a shared service, this is a meaningful protection feature.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnecting Rod Roller System: \u003c\/strong\u003eBoth the infeed and outfeed roller assemblies are mounted at the end of pivoting arms rather than on fixed axles. On a conventional planer, the infeed roller sits on a fixed shaft pressed downward by spring tension. As the board's leading edge pushes under it, the roller lifts straight up against that resistance — pressure is momentarily uneven and the board can hesitate or receive a compression mark from the infeed roller at entry. On the Class S 630, each roller assembly swings up along the arc of the connecting rod's pivot point rather than pushing straight up against fixed resistance. Pressure stays consistent through the full entry and exit — the board feeds through without hesitation and the roller leaves no entry or exit marks on the surface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIdle Bed Rollers: \u003c\/strong\u003eTwo adjustable idle rollers are set into the cast iron table and controlled by a lever on the infeed side of the bed. When raised slightly above the table surface, they allow rough, heavy, or wet lumber to feed through on initial passes without fighting resistance across the full table length. For finish passes, lower them flush with the table — the board then rides the full cast iron surface, which is the more stable reference for final thickness and surface quality. If you are getting snipe on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eXylent Cutterhead: \u003c\/strong\u003e105 carbide inserts across a 630mm spindle (120mm diameter) in three spiral rows. Each 15×15×2.5mm insert has four usable cutting edges — rotate 90 degrees when an edge dulls, replace after the fourth edge. At 105 insert seats, maintenance discipline matters more than on smaller heads: each seat must be cleaned individually before rotating. Skipping this step produces lines in the planed surface. A standard solvent and a stiff bristle brush are the right tools for this job.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeed Speed in Practice: \u003c\/strong\u003eVariable speed rewards deliberate use. Rough stock with significant surface variation runs efficiently at the upper end of the range — you are removing material quickly and surface quality on those passes is not the priority. As the board approaches final dimension, dialing back to the lower end of the range produces a cleaner surface with less tearout on difficult grain. The S 630's inverter lets you make that transition at exactly the right moment rather than at a fixed step.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePowered Table Lift: \u003c\/strong\u003eTwo-speed powered bed movement — fast for coarse positioning, slow for the micrometric fine adjustment needed to dial in a precise final thickness. The digital readout gives you a reliable reference to return to when running repeat dimensions. You set the dimension and note the readout; returning to it requires dialing back to that number manually.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDust Extraction: \u003c\/strong\u003e6\" (150mm) port. Minimum 754 CFM required. This machine produces shavings at volume — make sure your collection system is genuinely up to the task before the machine arrives.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo You Have a Jointer?\u003c\/strong\u003e A planer requires a flat reference face to work against. Without one, the planer reproduces any bow or twist in the lumber at consistent thickness rather than correcting it. If you do not have a jointer, the SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate machines to pair with this one.\u003c\/p\u003e\n\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this machine require 3-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Class S 630 X is a 3-phase only machine — 220V, 14 HP, 49A circuit. Confirm 3-phase service availability, your panel's available amperage, and that you can run a dedicated 49A circuit to the machine's location before ordering. Some shops will require an electrical service upgrade — factor that into the total installation budget before committing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSCM Class S 630 Xylent vs Tersa: which cutterhead should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTersa for cut quality. Xylent for production volume and lower maintenance frequency. Per SCM's own specs, the Xylent head runs 4dB quieter than Tersa — a difference most operators consider marginal. Where Xylent earns its place is in shops processing meaningful volume, particularly on abrasive or resinous species where carbide insert life significantly outlasts HSS knives. The finer chip output also keeps dust collection running more efficiently over long sessions. One consideration specific to the S 630: at 105 insert seats, a full Xylent rotation takes longer than on a smaller head — if knife change downtime is a genuine operational concern, Xylent's longer edge life between rotations becomes more valuable. For a shop where the best possible surface off the machine is the priority, Tersa is the stronger choice. The Class S 630 T is the same machine with a Tersa cutterhead.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does variable feed speed add in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrecision and throughput. The Nova S 520 offers four fixed feed speeds — useful, but a compromise between steps. The S 630's inverter covers 13–66 FPM continuously, letting you match feed rate exactly to species, grain, and removal depth rather than choosing the closest fixed option. Fine-grained hardwoods at higher removal depths want a slow, deliberate pass. Dimensional softwood for rough dimensioning can run near the top of the range. Over a full production day across varied stock, running the right speed at every stage rather than the nearest available one adds up to better surface quality and more material processed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I get a different infeed roller configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but it is a factory special order. The standard Class S 630 X ships with a sectioned steel infeed roller. Rubber-coated and dual-rubber-layer infeed options are available for shops processing delicate or finished surfaces. Contact OakTree for a quote and lead time to place your order. The outfeed rollers are interchangeable in the field.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat causes snipe, and how does this machine address it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSnipe — the slight over-cut at the leading and trailing ends of a board — is primarily a function of table stability and roller behavior as the board enters and exits the cutterhead. The Class S 630 addresses both: Acme-thread jack screws resist table movement under sustained load better than standard threads, and the connecting rod roller system keeps feed pressure consistent through the full entry and exit rather than momentarily uneven as the roller lifts. With proper setup, snipe on this machine is minimal. Lower the bed rollers flush with the table for finish passes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat dust collection do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e754 CFM minimum through a 6\" (150mm) port. This machine produces shavings quickly — verify your collector's rated output and that your ductwork is sized for a 6\" connection before delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need a jointer to use this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, in practical terms. A planer references off the bottom face of the board. If that face has any bow or twist, the planer reproduces that geometry at consistent thickness — it does not correct it. A jointer establishes the flat reference face the planer works against. Without one, you cannot produce truly flat, dimensioned stock from rough lumber. The SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate jointers to pair with this machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the minimum stock size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum thickness is 0.12\" (3.5mm). Minimum length is 10.24\". Maximum working thickness is 11.75\" (300mm).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Class S 630 X qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. [link: See how much you could save with our Section 179 calculator. \/pages\/section-179]\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs shipping included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is included.\u003c\/p\u003e\n\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSCM Xylent Cutterhead — 105 Carbide Inserts: \u003c\/strong\u003e15×15×2.5mm inserts across a 630mm spindle (120mm diameter) in three spiral rows. Four cutting edges per insert — rotate 90° when dull, replace after four edges. One screw per insert for secure, repeatable positioning. Helical shear geometry reduces operational noise and produces fine chips. 10 spare inserts and dynamometric key included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Variable Inverter Feed Speed — 13–66 FPM: \u003c\/strong\u003eContinuously variable across the full range — no fixed steps. Match feed rate precisely to species, removal depth, and material condition. Inverter-controlled for smooth speed transitions under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSectioned Steel Infeed Roller, Power-Driven: \u003c\/strong\u003eStandard on the Class S 630. Independent sections yield independently to whatever surface is beneath them, maintaining consistent feed pressure across the full width when boards of varying thickness feed simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock Welded Base, Heat-Treated: \u003c\/strong\u003eSingle normalized steel structure — all machine components mount and reference to one fixed frame. No multi-piece frame joints to shift under sustained load and vibration over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-Thread Jack Screws with Dust Protection: \u003c\/strong\u003eAcme threads distribute load across a wider contact face than standard V-threads, resisting wear and maintaining table stability under continuous production use. SCM's design prevents chain drive pressure from transferring directly to the jack screw shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting Rod Roller System — Infeed and Outfeed: \u003c\/strong\u003eEach roller assembly mounts at the end of a pivoting arm. As the board engages the roller, the assembly swings up along an arc rather than lifting straight against fixed spring resistance. Consistent feed pressure through the full entry and exit — no hesitation, no compression marks from the infeed roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Idle Bed Rollers: \u003c\/strong\u003eTwo idle rollers set into the cast iron table, controlled by a lever on the infeed side. Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where the full cast iron surface provides the more stable reference. If snipe appears on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Rubber-Coated Outfeed Rollers, Power-Driven: \u003c\/strong\u003eDual outfeed rollers for clean, consistent release across the full working width. Field-interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered Table Lift, 2-Speed with Micrometric Adjustment: \u003c\/strong\u003eFast mode for coarse positioning; slow mode for fine adjustment to a precise final dimension. Digital readout for reliable reference when returning to a previously used thickness setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Star-Delta Motor Start: \u003c\/strong\u003eReduces inrush current at startup by starting the motor in star configuration before transitioning automatically to delta at operating speed. Protects the motor and the shop's electrical system from direct-on-line startup surge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" (150mm) Dust Port: \u003c\/strong\u003eMinimum 754 CFM required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 14 HP (11 kW), 3-phase, 220V\u003cbr\u003e\n\u003cstrong\u003eCircuit Required:\u003c\/strong\u003e 49A, 3-phase\u003cbr\u003e\n\u003cstrong\u003eWorking Width:\u003c\/strong\u003e 24.8\" (630mm)\u003cbr\u003e\n\u003cstrong\u003eTable Length:\u003c\/strong\u003e 39.37\" (1,000mm)\u003cbr\u003e\n\u003cstrong\u003eMax Working Thickness:\u003c\/strong\u003e 11.75\" (300mm)\u003cbr\u003e\n\u003cstrong\u003eMin Working Thickness:\u003c\/strong\u003e 0.12\" (3.5mm)\u003cbr\u003e\n\u003cstrong\u003eMin Stock Length:\u003c\/strong\u003e 10.24\"\u003cbr\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Xylent — 105 carbide inserts + 10 spare\u003cbr\u003e\n\u003cstrong\u003eInsert Dimensions:\u003c\/strong\u003e 15×15×2.5mm\u003cbr\u003e\n\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,500 RPM\u003cbr\u003e\n\u003cstrong\u003eFeed Speed:\u003c\/strong\u003e Variable, 13–66 FPM (4–20 m\/min), inverter-controlled\u003cbr\u003e\n\u003cstrong\u003eInfeed Roller:\u003c\/strong\u003e Sectioned steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eOutfeed Rollers:\u003c\/strong\u003e 2× rubber-coated steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eBed Rollers:\u003c\/strong\u003e 2 adjustable idle rollers, standard\u003cbr\u003e\n\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Acme-thread jack screws with dust protection\u003cbr\u003e\n\u003cstrong\u003eTable Lift:\u003c\/strong\u003e Powered, 2-speed with micrometric adjustment and digital readout\u003cbr\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Monoblock welded steel, heat-treated (normalized)\u003cbr\u003e\n\u003cstrong\u003eMotor Start:\u003c\/strong\u003e Automatic star-delta\u003cbr\u003e\n\u003cstrong\u003eDust Port:\u003c\/strong\u003e 6\" (150mm)\u003cbr\u003e\n\u003cstrong\u003eDust Extraction Minimum:\u003c\/strong\u003e 754 CFM (1,300 m³\/h)\u003cbr\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 50.4\" W × 43.1\" D × 48.0\" H (1,280 × 1,095 × 1,219mm)\u003cbr\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,015 lbs (914 kg)\u003cbr\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 2,220 lbs (1,007 kg)\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e105 Xylent carbide inserts (installed)\u003c\/li\u003e\n\u003cli\u003e10 spare Xylent inserts (15×15×2.5mm)\u003c\/li\u003e\n\u003cli\u003eDynamometric key\u003c\/li\u003e\n\u003cli\u003e2 adjustable idle bed rollers (installed)\u003c\/li\u003e\n\u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003cli\u003eTool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment\u003c\/strong\u003e — Machine is in OakTree's warehouse and ships within normal lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock \/ Low stock as of [date]\u003c\/strong\u003e — Machine is in the manufacturer's U.S. warehouse. Typical lead time 3–5 business days to OakTree, then ships to customer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]\u003c\/strong\u003e — Machine is not yet in a U.S. warehouse. Estimated date reflects current manufacturer guidance and is subject to change.\u003c\/p\u003e\n\u003cp\u003eDates are estimates only and are not guaranteed. OakTree Supply is not responsible for delays in transit or delays caused by the manufacturer or freight carrier.\u003c\/p\u003e\n\n[\/TABS]","brand":"SCM","offers":[{"title":"Default Title","offer_id":19490343649398,"sku":"ClassS630X","price":25975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/classs630main_5905c6d8-4157-43c7-bfa5-e60373448fb5.jpg?v=1712154607"},{"product_id":"powermatic-209-20-straight-knife-planer-5hp-1ph-230v","title":"Powermatic 209 20\" Straight Knife Planer 5hp, 1PH, 230V","description":"\u003cp\u003eThis heavy duty Planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20\" planing capacity will handle the most demanding work. The 5\" dust port connects easily to any dust collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut. \u003cbr\u003e\u003c!--EndFragment--\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-209-20-straight-knife-planer-5hp-3ph-230-460v\" target=\"_blank\" title='Powermatic 209 20\" Straight Knife Planer 5hp, 3PH, 230\/460V product page' rel=\"noopener\"\u003e3-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS] \u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron head\u003c\/li\u003e\n\u003cli\u003eCast iron table with extensions creates a big 55-1\/2\" x 20\" working area\u003c\/li\u003e\n\u003cli\u003eChip breaker and pressure bar assists to reduce snipe\u003c\/li\u003e\n\u003cli\u003eChrome-plated, ergonomic handwheel makes adjustments smooth and easy\u003c\/li\u003e\n\u003cli\u003eCutterhead contains 4 high speed steel straight knives for a clean, smooth cut\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly for rigidity\u003c\/li\u003e\n\u003cli\u003eFully enclosed base cabinet with integrated casters for shop mobility\u003c\/li\u003e\n\u003cli\u003eSerrated steel infeed roller and smooth steel outfeed roller allows for 1\/8\" maximum depth of cut and trouble-free operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 20,000\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-3\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Required (min.):\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 24\/31 FPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/32\"\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 3\/32\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 6-3\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 40 Amps\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 25-3\/4\" x 20\"\u003cbr\u003e\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Column\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Straight Knife\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19738832142454,"sku":"PM9-1791296","price":5169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791296-1.jpg?v=1748888357"},{"product_id":"powermatic-201-22-straight-knife-planer","title":"Powermatic 201 22\" Straight Knife Planer 7.5hp, 1ph, 230v","description":"\u003cp\u003eThis 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5\" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe solid steel outfeed roller is machined with small serrations to ensure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou may easily raise the massive ribbed cast iron, ground finished table 1 \/16 with each turn of the hand wheel. The model 201 is available with a 7-1 \/2 horsepower, 3-phase or single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGrab some \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-replacement-knives-for-model-201-planer-4-pack\" target=\"_blank\" title=\"Powermatic Replacement Knives for Model 201 Planer product page\" rel=\"noopener\"\u003ereplacement knives\u003c\/a\u003e to keep your cutterhead sharp and functional.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 feed speeds - 20\/30 fpm - accommodates rough and fine finish work\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable bed rollers allow smooth feeding of rough or finished workpieces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll cast iron construction, the heavy cast iron table travels on two large lead screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCast iron construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDust chute with 5\" port for dust collection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRoller bearing-mounted feed rollers for smooth operation and long life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSegmented infeed roller with sectional chip breaker for planing multiple height stock\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStraight knife cutterhead with 4 high speed steel knives gives a clean smooth cut\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Rollers Adjustable from Front:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 19,200\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-1\/4\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed (RPM):\u003c\/strong\u003e 4,800\u003cbr\u003e\u003cstrong\u003eDust Collection Minimum Required:\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate (FPM):\u003c\/strong\u003e 20\/30\u003cbr\u003e\u003cstrong\u003eInfeed Roller Diameter:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eMaximum Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMaximum Full Width Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMaximum Planing Thickness:\u003c\/strong\u003e 9-1\/4\"\u003cbr\u003e\u003cstrong\u003eMaximum Planing Width:\u003c\/strong\u003e 22\"\u003cbr\u003e\u003cstrong\u003eMinimum Planing Length:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 7-1\/2hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230v\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 32-1\/2\" x 24\"\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Straight Knife\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19739805450358,"sku":"PM9-1791261","price":9899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791268-2_892479d0-f3b1-4b89-8a1b-b83e3d710e4b.jpg?v=1653509083"},{"product_id":"powermatic-201hh-22-helical-head-planer-7-5hp-1ph-230v","title":"Powermatic 201HH 22\" Helical Head Planer 7.5hp, 1PH, 230V","description":"\u003cp\u003e\u003cspan\u003eThis 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5\" dust port for easy attachment to any dust collection system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe cutterhead is a helical design with 150 four-sided knife inserts — these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to ensure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1 \/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planning requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-201hh-22-helical-head-planer-7-5hp\" title='Powermatic 201HH 22\" Helical Head Planer 7.5hp, 3PH, 230V product page' rel=\"noopener\" target=\"_blank\"\u003e3-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 feed speeds - 20\/30 fpm - accommodates rough and fine finish work\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable bed rollers allow smooth feeding of rough or finished workpieces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll cast iron construction, the heavy cast iron table travels on two large lead screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCast iron construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDust chute with 5\" port for dust collection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelical cutterhead with 125 four sided carbide knife inserts provides smoother, quieter cutting and finer finish than conventional systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRoller bearing-mounted feed rollers for smooth operation and long life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSegmented infeed roller with sectional chip breaker for planing multiple height stock\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Rollers Adjustable from Front:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e Not Applicable\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-1\/4\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,800 RPM\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 20\/30 FPM\u003cbr\u003e\u003cstrong\u003eInfeed Roller Diameter:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMax. Height of Rollers Parallel to Tabletop:\u003c\/strong\u003e 0.05\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 9-1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 22\"\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 7-1\/2hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNumber of Speeds:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e HELICAL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19739973124214,"sku":"PM9-1791267","price":12539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791268-2.jpg?v=1748888356"},{"product_id":"powermatic-wp2510-25-helical-head-planer","title":"Powermatic WP2510 25\" Helical Head Planer","description":"\u003cp\u003eThe Powermatic WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1\/4. Its automatically adjusting, chain drive gearbox powers the 3\" diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe WP2510 Planer has a large 32-3\/16\" x 26\" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05\". The hood features a built-in 5\" diameter dust chute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS] \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeature\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e3\" diameter infeed and outfeed rollers are supported by four large needle bearings for long life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable table\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMassive gear box maintains positive feed by using a large chain drive with automatic tensioners to power infeed and outfeed rollers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick-Set micro-adjustable lever easily raises and lowers table rollers from 0\" to 0.050\" at a touch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel helical insert head with 174 four-sided carbide inserts eliminates need for adjustment after changing knives, reduces sound levels \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 30,000\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-3\/8\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed (RPM):\u003c\/strong\u003e 5,000\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate (FPM):\u003c\/strong\u003e 20\/25\/30\u003cbr\u003e\u003cstrong\u003eInfeed Roller Diameter:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eMaximum Depth of Cut:\u003c\/strong\u003e 1\/4\"\u003cbr\u003e\u003cstrong\u003eMaximum Full Width Depth of Cut:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMaximum Planing Width:\u003c\/strong\u003e 25\"\u003cbr\u003e\u003cstrong\u003eMinimum Planing Length:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 37\/18.5\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 15hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230\/460V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e HELICAL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19740754280566,"sku":"PM9-1791303","price":21339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791303-1.jpg?v=1748888356"},{"product_id":"jet-jpw-208-1-20-planer","title":"JET JPW-208-1 20\" Planer","description":"\u003cp\u003eThe JET JWP-208-1 Planer quickly and quietly transforms rough lumber into smooth boards, with a full 20\" planing width. Its heavy-duty cast iron and steel construction keeps the workpiece steady and supported, while the conveniently located two-speed gear box allows for quick and easy feed rate adjustments.\u003c\/p\u003e\n\u003cp\u003eThis machine means business with a powerful 3HP induction motor. You'll appreciate the sets of three steel infeed and outfeed rollers to help prevent annoying snipe. A large cast-iron table with smooth-as-glass surface makes this planer a beautiful addition to the shop. And since planers kick up a lot of dust, we made dust collection easy with an exclusive angled 4\" dust port to keep your hose out of the way.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/16\" Increment height scale lets you make the most precise adjustments for fine cuts\u003c\/li\u003e\n\u003cli\u003eFour high-speed steel cutter knives produce faster, smoother cutting\u003c\/li\u003e\n\u003cli\u003eLarge handwheel with positive gear drive allows for quick and accurately table adjustments\u003c\/li\u003e\n\u003cli\u003eMagnetic controls provide long life and reliability\u003c\/li\u003e\n\u003cli\u003eOne-piece welded steel base offers solid support and stability\u003c\/li\u003e\n\u003cli\u003eSets of three steel infeed and outfeed rollers to help in the prevention of snipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-3\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Required:\u003c\/strong\u003e 400 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum Full Width Depth of Cut:\u003c\/strong\u003e 3\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum Planing Thickness:\u003c\/strong\u003e 8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum Planing Width:\u003c\/strong\u003e 20\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMinimum Planing Length:\u003c\/strong\u003e 6-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3HP\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor Standing Model\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 25-3\/4\u003cspan\u003e\"\u003c\/span\u003e x 20\u003cspan\u003e\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":20331135107190,"sku":"JT9-708528","price":4289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/708528-1.jpg?v=1748882578"},{"product_id":"laguna-25-industrial-planer","title":"Laguna 25\" 15HP Industrial Planer (3PH)","description":"\u003cp\u003eOversized bearing housings ensure ultra-smooth, quiet performance and long life. Most thickness- planers in this class have only 2 or 4 speeds and it seems they never have the right speed for the job. The Laguna 25 comes standard with Electronic Variable Speed meaning you will ALWAYS have the exact speed required.\u003c\/p\u003e\n\u003cp\u003eAnother feature not normally found in this class is the standard PLC control which allows you to simply enter in the desired height and the bed moves automatically to that setting. You 'll never want to go back to turning a hand wheel to find your thickness (or even holding down a button for that matter!). The PLC in the Laguna Industrial 25 planer also has automatic backlash compensation ensuring exact thicknesses.\u003c\/p\u003e\n\u003cp\u003eOf course, no world-class planer would be complete without the incredible ShearTec II cutter head, which boasts 6 rows of 4 sided German carbide inserts for a total of 174 knives!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDRO (Digital Read Out)\u003c\/li\u003e\n\u003cli\u003ePLC Programmable Height Setting\u003c\/li\u003e\n\u003cli\u003ePush-Button Height Setting\u003c\/li\u003e\n\u003cli\u003eManual Back-Up Height Setting\u003c\/li\u003e\n\u003cli\u003eAdjustable Retractable Table Rollers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor, Cutterhead:\u003c\/strong\u003e 15HP 3 Phase, 220 Volt\u003cbr\u003e\u003cstrong\u003eMotor, Feed:\u003c\/strong\u003e 3\/4HP, DC Electronically Variable speed\u003cbr\u003e\u003cstrong\u003eMotor, Vertical:\u003c\/strong\u003e 3\/4HP, AC\u003cbr\u003e\u003cstrong\u003eMax. Stock Width:\u003c\/strong\u003e 25\"\u003cbr\u003e\u003cstrong\u003eMax. Stock Thickness:\u003c\/strong\u003e 9\"\u003cbr\u003e\u003cstrong\u003eMin. Stock Thickness:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMin. Stock Length:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal 1\"-12\" Wide:\u003c\/strong\u003e 6 mm\/1\/4\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal 12-25 Wide:\u003c\/strong\u003e 3 mm\/1\/8\u003cbr\u003e\u003cstrong\u003eElectronic Variable Speed:\u003c\/strong\u003e 10-30 FPM\u003cbr\u003e\u003cstrong\u003eTable Size:\u003c\/strong\u003e 52\" L x 26\" W (including extensions)\u003cbr\u003e\u003cstrong\u003eShearTecII Cutterhead:\u003c\/strong\u003e 6 row 174 Insert Knives\u003cbr\u003e\u003cstrong\u003eCutter-head Diameter:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eCutter-head Speed:\u003c\/strong\u003e 4,800 RPM\u003cbr\u003e\u003cstrong\u003eKnives:\u003c\/strong\u003e 174 ShearTec II, 4-sided, Solid Carbide\u003cbr\u003e\u003cstrong\u003eSegmented In-feed Roller:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003e2 Polished Out-feed Rollers:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eIn\/Out-Feed Cast Extensions Included:\u003c\/strong\u003e 10\" L X 26\" W\u003cbr\u003e\u003cstrong\u003eDust ports:\u003c\/strong\u003e 5\u003cbr\u003e\u003cstrong\u003eWeight (Net\/Ship):\u003c\/strong\u003e 1,672\/1,848 Lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uNtqQ03q8_Y\" height=\"315\" width=\"100%\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22500506665078,"sku":"MPLAN25-15-3-0130","price":17999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MPLAN25-15-3-0130-1.jpg?v=1701700457"},{"product_id":"laguna-px-22-sheartec-ii-7-5-hp-1-ph-planer","title":"Laguna PX|22 ShearTec: II Planer 7.5hp, 1PH, 220V","description":"\u003cp\u003e\u003cspan\u003eThe ShearTec II is standard on the PX|20 Planer. The ShearTec II is a 6-row carbide insert cutterhead that produces a superior surface finish on all woods including challenging hardwoods. The ShearTec II knives and fasteners have a T-step design to maximize clamping force on the knives preventing knife cracking and chatter. The 4-sided carbide insert knives produce a shear cut for flawless results. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe ShearTec II cutterhead has deep grooves that make the cutterhead very quiet and improve shaving ejection. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-px-px-22-sheartec-ii-10-hp-3-ph-planer\" title=\"Laguna PX|22 ShearTec: II Planer 10hp, 3PH, 220V product page\" target=\"_blank\"\u003e10hp, 3PH motor.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Laguna-Planer-Comparison-Chart pdf\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Laguna-Planer-Comparison-PX-Series_2021.pdf?v=1615323893\" target=\"_blank\"\u003eCompare PX Planers \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" title=\"Laguna Warranty page\" rel=\"noopener\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor\u003c\/strong\u003e - The PX|22 comes with either 7.5 HP Single Phase or 10 HP 3 Phase motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSegmented Infeed Roller\u003c\/strong\u003e - Allows for multiple boards to be fed without having individual boards stall out due to small variations in thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Variable Speed\u003c\/strong\u003e - Allows users to speed up the material feed for quick thicknessing or to use slower rates for more cuts per inch. This feature is something that is normally found on much more expensive models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfeed and Outfeed Rollers\u003c\/strong\u003e - The PX|22 features infeed and outfeed rollers to assist with material loading and feeding and provide a compact footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Readout\u003c\/strong\u003e - The DRO makes setting precise thickness easier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic Control Panel\u003c\/strong\u003e - Machine controls and DRO have been moved to the control panel at the top of the machine and angled toward the machine operator for easy access and better visibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Dust Collection\u003c\/strong\u003e - The 5” diameter dust chute offers the option to point to right or left to optimize dust collection system layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Post Bed Support\u003c\/strong\u003e - Provides precise and consistent performance with every cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor\u003c\/strong\u003e 220v 7.5HP 1phase 60hz\/32 Amp.\u003cbr\u003e\u003cstrong\u003eCSA\u003c\/strong\u003e YES\u003cbr\u003e\u003cstrong\u003eBed Size\u003c\/strong\u003e 22 x 28\"\u003cbr\u003e\u003cstrong\u003ePull-Out Extension\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eWheels Built-in\u003c\/strong\u003e Optional\u003cbr\u003e\u003cstrong\u003eMax. Depth of cut\u003c\/strong\u003e 1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. Stock Thickness\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eMin. Stock Thickness\u003c\/strong\u003e 1\/2\"\u003cbr\u003e\u003cstrong\u003eMin. Stock Length\u003c\/strong\u003e 9\"\u003cbr\u003e\u003cstrong\u003eMax. Stock Width\u003c\/strong\u003e 22\"\u003cbr\u003e\u003cstrong\u003eFeed Speed\u003c\/strong\u003e 10 - 30 FPM Elec. Vari Spd.\u003cbr\u003e\u003cstrong\u003eDust Port Diameter\u003c\/strong\u003e 5\" LEFT and RIGHT\u003cbr\u003e\u003cstrong\u003eCutterhead RPM\u003c\/strong\u003e 5000\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eCutterhead Insert #\u003c\/strong\u003e 150 x 4-sided Carbide, 6 Row\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/onXZvzUF_KA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":39331327967431,"sku":"MPLANPX2275-0130","price":6599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/MPLANPL2275-0130-6.jpg?v=1615399405"},{"product_id":"scm-class-s-630-tersa-24-planer","title":"SCM Class S 630 - Tersa 24\" Planer","description":"\u003c!-- ============================================================\n     SCM Class S 630 T — Shopify Product Description v1\n     Paste into Products \u003e Description \u003e Source (\u003c\u003e) view\n\n     TITLE TAG (63 chars):\n     SCM Class S 630 T | 24.8\" Tersa Planer | 14 HP | OakTree Supply\n\n     META DESCRIPTION (138 chars):\n     Made in Italy. SCM Class S 630 T — 24.8\" planer, 14 HP 3-phase, Tersa cutterhead, variable feed speed, monoblock base. Freight included.\n\n     NOTE: Section 179 calculator link to be added manually by Sara.\n     NOTE: No Optional Installation \u0026 Training tab on this page.\n     NOTE: Cross-reference links to SCM jointers to be added manually by Sara.\n     NOTE: Tersa knife length listed as 630mm — verify with SCM before publishing.\n     ============================================================ --\u003e\n\n\u003cp\u003eThe SCM Class S 630 T is a 24.8\" industrial planer built in Italy — 14 HP 3-phase motor, monoblock welded base, fully variable inverter-controlled feed speed, and a Tersa cutterhead with 4 straight knives. It is built for millwork shops, cabinet operations, and professional woodworkers who regularly process lumber and edge-glued panels beyond the 20\" range and want the best possible surface straight off the machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRequires 3-phase power (220V, 49A circuit). Confirm service availability and panel capacity before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTersa cutterhead — 4 straight knives, 630mm:\u003c\/strong\u003e Centrifugal locking — knives seat automatically when the machine starts, no tools required. Each knife is double-sided — rotate once before replacing. Change time under a minute per knife. Multiple alloy options including HSS and M42 cobalt for abrasive and resinous species.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest surface finish in the lineup:\u003c\/strong\u003e Tersa produces the finest surface straight off the machine when knives are sharp. The choice for artisan shops, fine furniture, and anyone where surface quality is the priority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24.8\" (630mm) working width:\u003c\/strong\u003e Handles lumber and edge-glued panels up to 24.8\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 HP, 3-phase, 220V:\u003c\/strong\u003e Purpose-built production motor. 49A circuit required — confirm panel capacity before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully variable inverter-controlled feed speed, 13–66 FPM:\u003c\/strong\u003e Dial any speed across the full range rather than choosing between fixed steps. Match feed rate precisely to species, removal depth, and material condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSectioned steel infeed roller:\u003c\/strong\u003e Standard on the S 630. Independent sections apply consistent feed pressure across the full width even when boards of varying thickness feed side by side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered table lift with digital readout:\u003c\/strong\u003e 2-speed powered bed movement with micrometric fine adjustment. Set thickness precisely and use the readout as a reliable reference when returning to a previously used dimension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock welded base, heat-treated:\u003c\/strong\u003e Single normalized steel structure — all machine components mount and reference to one frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-thread jack screws:\u003c\/strong\u003e Acme threads distribute load across a wider contact face than standard V-threads, resisting wear and table deflection under sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable idle bed rollers:\u003c\/strong\u003e Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where surface quality is the priority.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e6\" (150mm) dust port, 754 CFM minimum.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA planer's job is to thickness lumber and edge-glued panels to a consistent, accurate dimension — without snipe, without compression marks, and without variation across the width of the board. The Class S 630 T is built around the same structural foundation as the Nova S 520, and adds two capabilities that matter in a production environment: fully variable feed speed and a sectioned infeed roller standard. The Tersa cutterhead makes it the right choice for shops where surface quality off the machine is the priority.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTersa Cutterhead: \u003c\/strong\u003eThe Tersa system uses four straight knives that lock by centrifugal force when the machine starts — no wrenches, no setting, no torque sequence. Slide the knife into its holder, start the machine, and centrifugal force seats it. Change time is under a minute per knife. When a knife dulls, it comes out in seconds and a fresh one goes in just as fast. Each knife is double-sided — rotate it once before replacing to get full use out of every edge. The result is a head that is almost never running on tired edges, which is exactly why Tersa produces the finest surface finish in this lineup. Sharp knives and fast changes keep surface quality consistent throughout the workday rather than degrading gradually between changes. Multiple knife alloys are available — standard HSS for everyday work, M42 cobalt for abrasive or resinous species where HSS dulls more quickly. Replacement knives can be ordered from OakTree at the time of purchase or on an as-needed basis.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVariable Inverter Feed Speed: \u003c\/strong\u003eThe Nova S 520 offers four fixed feed speeds — useful, but a compromise at any point between those steps. The Class S 630 replaces fixed speeds with a fully variable inverter that covers 13–66 FPM continuously. In practice, this means the operator sets the exact feed rate that suits the combination of species, grain direction, and removal depth rather than choosing the closest available option. Fine-grained hardwoods like hard maple or cherry want a slow, deliberate pass at higher removal depths. Dimensional softwood for rough dimensioning can run at the upper end of the range. With four fixed speeds, you accept the compromise closest to what you need. With variable speed, you run the right speed every time. Over a full production day across varied stock, this precision adds up to more consistent surface quality and better throughput.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSectioned Steel Infeed Roller: \u003c\/strong\u003eA solid infeed roller applies the same downward pressure across its full width. When two boards of slightly different thickness feed side by side — common in any batch of rough-sawn stock — the solid roller bridges to the thicker board and loses grip on the thinner one. Feed becomes inconsistent and the thinner board may not feed reliably at all. The sectioned roller divides into independent sections along its width, each yielding independently to whatever material is beneath it. Two boards of different thicknesses feed simultaneously with consistent pressure applied to each. This is why the S 630 handles rough stock batches more reliably than a machine with a solid roller. If your operation requires a different infeed roller configuration — rubber-coated or dual-rubber-layer for delicate or finished surfaces — that is a factory special order. Contact OakTree for a quote and lead time to place your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMonoblock Base: \u003c\/strong\u003eThe SCM Class S 630 is manufactured in Italy, and the monoblock base is central to how SCM builds this machine to last. It is a single welded steel structure that undergoes normalization — a heat treatment process that relieves internal stress and stabilizes the metal. Every mechanism on the machine mounts and references to this single structure. With a machine built on a bolted or multi-piece frame, each component references to a different casting or weldment. Those joints shift under sustained load and vibration over time. With a monoblock base, there is no joint to shift.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAcme-Thread Jack Screws: \u003c\/strong\u003eThe table rides on four Acme-threaded jack screws. Acme threads have a trapezoidal profile that distributes load across a wider contact face than the V-shaped profile of standard threads. Under continuous heavy use, this geometry wears more evenly and maintains table stability longer. SCM's design also prevents chain drive pressure from transferring directly to the jack screw shaft — eliminating a secondary source of table movement that contributes to snipe over the machine's life.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAutomatic Star-Delta Motor Start: \u003c\/strong\u003eA 14 HP motor draws significant inrush current at startup. The Class S 630 uses an automatic star-delta starter to manage this. The motor starts in star configuration — lower voltage, reduced torque, lower current draw — then transitions automatically to delta configuration once it reaches operating speed. This reduces the startup surge on the shop's electrical system and protects the motor from the stress of a direct-on-line start. At shops running multiple large motors on a shared service, this is a meaningful protection feature.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnecting Rod Roller System: \u003c\/strong\u003eBoth the infeed and outfeed roller assemblies are mounted at the end of pivoting arms rather than on fixed axles. On a conventional planer, the infeed roller sits on a fixed shaft pressed downward by spring tension. As the board's leading edge pushes under it, the roller lifts straight up against that resistance — pressure is momentarily uneven and the board can hesitate or receive a compression mark from the infeed roller at entry. On the Class S 630, each roller assembly swings up along the arc of the connecting rod's pivot point rather than pushing straight up against fixed resistance. Pressure stays consistent through the full entry and exit — the board feeds through without hesitation and the roller leaves no entry or exit marks on the surface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIdle Bed Rollers: \u003c\/strong\u003eTwo adjustable idle rollers are set into the cast iron table and controlled by a lever on the infeed side of the bed. When raised slightly above the table surface, they allow rough, heavy, or wet lumber to feed through on initial passes without fighting resistance across the full table length. For finish passes, lower them flush with the table — the board then rides the full cast iron surface, which is the more stable reference for final thickness and surface quality. If you are getting snipe on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeed Speed in Practice: \u003c\/strong\u003eVariable speed rewards deliberate use. Rough stock with significant surface variation runs efficiently at the upper end of the range — you are removing material quickly and surface quality on those passes is not the priority. As the board approaches final dimension, dialing back to the lower end of the range produces a cleaner surface with less tearout on difficult grain. The S 630 T's inverter lets you make that transition at exactly the right moment rather than at a fixed step — and with Tersa knives at peak sharpness for finish passes, the result off the machine is as clean as it gets.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePowered Table Lift: \u003c\/strong\u003eTwo-speed powered bed movement — fast for coarse positioning, slow for the micrometric fine adjustment needed to dial in a precise final thickness. The digital readout gives you a reliable reference to return to when running repeat dimensions. You set the dimension and note the readout; returning to it requires dialing back to that number manually.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDust Extraction: \u003c\/strong\u003e6\" (150mm) port. Minimum 754 CFM required. This machine produces shavings at volume — make sure your collection system is genuinely up to the task before the machine arrives.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo You Have a Jointer?\u003c\/strong\u003e A planer requires a flat reference face to work against. Without one, the planer reproduces any bow or twist in the lumber at consistent thickness rather than correcting it. If you do not have a jointer, the SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate machines to pair with this one.\u003c\/p\u003e\n\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this machine require 3-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Class S 630 T is a 3-phase only machine — 220V, 14 HP, 49A circuit. Confirm 3-phase service availability, your panel's available amperage, and that you can run a dedicated 49A circuit to the machine's location before ordering. Some shops will require an electrical service upgrade — factor that into the total installation budget before committing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSCM Class S 630 Tersa vs Xylent: which cutterhead should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTersa for cut quality. Xylent for production volume and lower maintenance frequency. Per SCM's own specs, the Xylent head runs 4dB quieter than Tersa — a difference most operators consider marginal. Tersa's advantage is surface finish: sharp straight knives produce the finest surface straight off the machine, and the fast knife change system means fresh edges are never more than a minute away. Where Xylent earns its place is in shops processing high volume on abrasive or resinous species, where carbide insert life significantly outlasts HSS knives and the finer chip output keeps dust collection running more efficiently over long sessions. For a shop where the best possible surface is the priority, Tersa is the stronger choice. The Class S 630 X is the same machine with an SCM Xylent cutterhead.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does variable feed speed add in practice?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrecision and throughput. The Nova S 520 offers four fixed feed speeds — useful, but a compromise between steps. The S 630's inverter covers 13–66 FPM continuously, letting you match feed rate exactly to species, grain, and removal depth rather than choosing the closest fixed option. Fine-grained hardwoods at higher removal depths want a slow, deliberate pass. Dimensional softwood for rough dimensioning can run near the top of the range. Over a full production day across varied stock, running the right speed at every stage rather than the nearest available one adds up to better surface quality and more material processed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I get a different infeed roller configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, but it is a factory special order. The standard Class S 630 T ships with a sectioned steel infeed roller. Rubber-coated and dual-rubber-layer infeed options are available for shops processing delicate or finished surfaces. Contact OakTree for a quote and lead time to place your order. The outfeed rollers are interchangeable in the field.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat causes snipe, and how does this machine address it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSnipe — the slight over-cut at the leading and trailing ends of a board — is primarily a function of table stability and roller behavior as the board enters and exits the cutterhead. The Class S 630 addresses both: Acme-thread jack screws resist table movement under sustained load better than standard threads, and the connecting rod roller system keeps feed pressure consistent through the full entry and exit rather than momentarily uneven as the roller lifts. With proper setup, snipe on this machine is minimal. Lower the bed rollers flush with the table for finish passes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat dust collection do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e754 CFM minimum through a 6\" (150mm) port. This machine produces shavings quickly — verify your collector's rated output and that your ductwork is sized for a 6\" connection before delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need a jointer to use this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, in practical terms. A planer references off the bottom face of the board. If that face has any bow or twist, the planer reproduces that geometry at consistent thickness — it does not correct it. A jointer establishes the flat reference face the planer works against. Without one, you cannot produce truly flat, dimensioned stock from rough lumber. The SCM Nova F 410, Nova F 520, and L'Invincibile F 7 are the appropriate jointers to pair with this machine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the minimum stock size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum thickness is 0.12\" (3.5mm). Minimum length is 10.24\". Maximum working thickness is 11.75\" (300mm).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Class S 630 T qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. [link: See how much you could save with our Section 179 calculator. \/pages\/section-179]\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs shipping included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is included.\u003c\/p\u003e\n\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTersa Cutterhead — 4 Straight Knives, 630mm: \u003c\/strong\u003eCentrifugal locking — knives seat automatically on startup, no tools or setting required. Each knife is double-sided — rotate once before replacing. Change time under a minute per knife. Multiple alloy options: HSS for everyday work, M42 cobalt for abrasive and resinous species. Replacement knives available from OakTree.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Variable Inverter Feed Speed — 13–66 FPM: \u003c\/strong\u003eContinuously variable across the full range — no fixed steps. Match feed rate precisely to species, removal depth, and material condition. Inverter-controlled for smooth speed transitions under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSectioned Steel Infeed Roller, Power-Driven: \u003c\/strong\u003eStandard on the Class S 630. Independent sections yield independently to whatever surface is beneath them, maintaining consistent feed pressure across the full width when boards of varying thickness feed simultaneously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock Welded Base, Heat-Treated: \u003c\/strong\u003eSingle normalized steel structure — all machine components mount and reference to one fixed frame. No multi-piece frame joints to shift under sustained load and vibration over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Acme-Thread Jack Screws with Dust Protection: \u003c\/strong\u003eAcme threads distribute load across a wider contact face than standard V-threads, resisting wear and maintaining table stability under continuous production use. SCM's design prevents chain drive pressure from transferring directly to the jack screw shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting Rod Roller System — Infeed and Outfeed: \u003c\/strong\u003eEach roller assembly mounts at the end of a pivoting arm. As the board engages the roller, the assembly swings up along an arc rather than lifting straight against fixed spring resistance. Consistent feed pressure through the full entry and exit — no hesitation, no compression marks from the infeed roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Idle Bed Rollers: \u003c\/strong\u003eTwo idle rollers set into the cast iron table, controlled by a lever on the infeed side. Raise for rough, heavy, or wet lumber to reduce feed resistance on initial passes. Lower flush with the table for finish passes where the full cast iron surface provides the more stable reference. If snipe appears on finish passes, lowering the bed rollers is the first adjustment to make.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Rubber-Coated Outfeed Rollers, Power-Driven: \u003c\/strong\u003eDual outfeed rollers for clean, consistent release across the full working width. Field-interchangeable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered Table Lift, 2-Speed with Micrometric Adjustment: \u003c\/strong\u003eFast mode for coarse positioning; slow mode for fine adjustment to a precise final dimension. Digital readout for reliable reference when returning to a previously used thickness setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Star-Delta Motor Start: \u003c\/strong\u003eReduces inrush current at startup by starting the motor in star configuration before transitioning automatically to delta at operating speed. Protects the motor and the shop's electrical system from direct-on-line startup surge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" (150mm) Dust Port: \u003c\/strong\u003eMinimum 754 CFM required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 14 HP (11 kW), 3-phase, 220V\u003cbr\u003e\n\u003cstrong\u003eCircuit Required:\u003c\/strong\u003e 49A, 3-phase\u003cbr\u003e\n\u003cstrong\u003eMotor Start:\u003c\/strong\u003e Automatic star-delta\u003cbr\u003e\n\u003cstrong\u003eWorking Width:\u003c\/strong\u003e 24.8\" (630mm)\u003cbr\u003e\n\u003cstrong\u003eTable Length:\u003c\/strong\u003e 39.37\" (1,000mm)\u003cbr\u003e\n\u003cstrong\u003eMax Working Thickness:\u003c\/strong\u003e 11.75\" (300mm)\u003cbr\u003e\n\u003cstrong\u003eMin Working Thickness:\u003c\/strong\u003e 0.12\" (3.5mm)\u003cbr\u003e\n\u003cstrong\u003eMin Stock Length:\u003c\/strong\u003e 10.24\"\u003cbr\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Tersa — 4 straight knives, 630mm\u003cbr\u003e\n\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,500 RPM\u003cbr\u003e\n\u003cstrong\u003eFeed Speed:\u003c\/strong\u003e Variable, 13–66 FPM (4–20 m\/min), inverter-controlled\u003cbr\u003e\n\u003cstrong\u003eInfeed Roller:\u003c\/strong\u003e Sectioned steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eOutfeed Rollers:\u003c\/strong\u003e 2× rubber-coated steel, power-driven\u003cbr\u003e\n\u003cstrong\u003eBed Rollers:\u003c\/strong\u003e 2 adjustable idle rollers, standard\u003cbr\u003e\n\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Acme-thread jack screws with dust protection\u003cbr\u003e\n\u003cstrong\u003eTable Lift:\u003c\/strong\u003e Powered, 2-speed with micrometric adjustment and digital readout\u003cbr\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Monoblock welded steel, heat-treated (normalized)\u003cbr\u003e\n\u003cstrong\u003eDust Port:\u003c\/strong\u003e 6\" (150mm)\u003cbr\u003e\n\u003cstrong\u003eDust Extraction Minimum:\u003c\/strong\u003e 754 CFM (1,300 m³\/h)\u003cbr\u003e\n\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 50.4\" W × 43.1\" D × 48.0\" H (1,280 × 1,095 × 1,219mm)\u003cbr\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 2,015 lbs (914 kg)\u003cbr\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 2,220 lbs (1,007 kg)\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4 Tersa knives, 630mm (installed)\u003c\/li\u003e\n\u003cli\u003e2 adjustable idle bed rollers (installed)\u003c\/li\u003e\n\u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003cli\u003eTool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment\u003c\/strong\u003e — Machine is in OakTree's warehouse and ships within normal lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock \/ Low stock as of [date]\u003c\/strong\u003e — Machine is in the manufacturer's U.S. warehouse. Typical lead time 3–5 business days to OakTree, then ships to customer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]\u003c\/strong\u003e — Machine is not yet in a U.S. warehouse. Estimated date reflects current manufacturer guidance and is subject to change.\u003c\/p\u003e\n\u003cp\u003eDates are estimates only and are not guaranteed. OakTree Supply is not responsible for delays in transit or delays caused by the manufacturer or freight carrier.\u003c\/p\u003e\n\n[\/TABS]","brand":"SCM","offers":[{"title":"Default Title","offer_id":40325663457479,"sku":"ClassS630T","price":24475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/classs630main.jpg?v=1712150761"},{"product_id":"powermatic-201hh-22-helical-head-planer-7-5hp","title":"Powermatic 201HH 22\" Helical Head Planer 7.5hp, 3PH, 230V","description":"\u003cp\u003e\u003cspan\u003eThis 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5\" dust port for easy attachment to any dust collection system. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe cutterhead is a helical design with 150 four-sided knife inserts  these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to ensure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1 \/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planning requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-201hh-22-helical-head-planer-7-5hp-1ph-230v\" target=\"_blank\" title='Powermatic 201HH 22\" Helical Head Planer 7.5hp, 1PH, 230V product page' rel=\"noopener\"\u003e1-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2 feed speeds - 20\/30 fpm - accommodates rough and fine finish work\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable bed rollers allow smooth feeding of rough or finished workpieces\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll cast iron construction, the heavy cast iron table travels on two large lead screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCast iron construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDust chute with 5\" port for dust collection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelical cutterhead with 125 four sided carbide knife inserts provides smoother, quieter cutting and finer finish than conventional systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRoller bearing-mounted feed rollers for smooth operation and long life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSegmented infeed roller with sectional chip breaker for planing multiple height stock\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBed Rollers Adjustable from Front:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e Not Applicable\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-1\/4\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 4,800 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Required (min.):\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 20\/30 FPM\u003cbr\u003e\u003cstrong\u003eInfeed Roller Diameter:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 3\/16\"\u003cbr\u003e\u003cstrong\u003eMax. Height of Rollers Parallel to Tabletop:\u003c\/strong\u003e 0.05\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 9-1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 22\"\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 7-1\/2hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNumber of Speeds:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e HELICAL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":45065704210649,"sku":"PM9-1791268","price":12539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/1791268-2.jpg?v=1748888273"},{"product_id":"powermatic-209-20-straight-knife-planer-5hp-3ph-230-460v","title":"Powermatic 209 20\" Straight Knife Planer 5hp, 3PH, 230\/460V","description":"\u003cp\u003eThis heavy duty Planer offers performance and value, loaded with standard features not found on other machines in its class. The powerful 5HP motor and 20\" planing capacity will handle the most demanding work. The 5\" dust port connects easily to any dust collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe solid cast iron base, table and head are designed for production. The 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM. The gearbox can be changed to 4-speed with the included gear to run lower speeds of 16 and 20 FPM. The corrugated infeed and fine groove outfeed rollers ensure a smooth feed. The precision ground and polished cast iron table rides on four steel columns giving it plenty of support for the larger workpiece. Heavy cast iron extension wings ensure a flat, smooth cut. \u003cbr\u003e\u003c!--EndFragment--\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-209-20-straight-knife-planer-5hp-1ph-230v\" target=\"_blank\" title='Powermatic 209 20\" Straight Knife Planer 5hp, 1PH, 230V product page' rel=\"noopener\"\u003e1-phase motor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS] \u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron head\u003c\/li\u003e\n\u003cli\u003eCast iron table with extensions creates a big 55-1\/2\" x 20\" working area\u003c\/li\u003e\n\u003cli\u003eChip breaker and pressure bar assists to reduce snipe\u003c\/li\u003e\n\u003cli\u003eChrome-plated, ergonomic handwheel makes adjustments smooth and easy\u003c\/li\u003e\n\u003cli\u003eCutterhead contains 4 high speed steel straight knives for a clean, smooth cut\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly\u003c\/li\u003e\n\u003cli\u003eFeed rollers and cutterhead supported by full cast iron head assembly for rigidity\u003c\/li\u003e\n\u003cli\u003eFully enclosed base cabinet with integrated casters for shop mobility\u003c\/li\u003e\n\u003cli\u003eSerrated steel infeed roller and smooth steel outfeed roller allows for 1\/8\" maximum depth of cut and trouble-free operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 20,000\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-3\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Required (min.):\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 24\/31 FPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 3\/32\"\u003cbr\u003e\u003cstrong\u003eMax. Full Width Depth of Cut:\u003c\/strong\u003e 3\/32\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 6-3\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230\/460V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 40 Amps\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 25-3\/4\" x 20\"\u003cbr\u003e\u003cstrong\u003eTable Support:\u003c\/strong\u003e 4 Column\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Straight Knife\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":45065785934041,"sku":"PM9-1791297","price":5169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/1791296-1.jpg?v=1748888272"},{"product_id":"jet-black-20-helical-head-planer","title":"JET Black 20\" Helical Head Planer with Performance Coating","description":"\u003cp\u003eThe JWP-208HH Helical Head Planer quickly and quietly transforms rough lumber into smooth boards, with a full 20\" planing width. Its heavy-duty steel construction keeps the workpiece steady and supported, while the conveniently located two-speed gear box allows for quick and easy feed rate adjustments.\u003c\/p\u003e\n\u003cp\u003eMost notable on this machine is the JET Black performance-coated table. This low-friction coating is extremely smooth, rust-resistant, and enhances visibility for effortless command and accurate results. JET Black coating also eliminates the need for waxing or polishing.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET Black Performance Coating:\u003c\/strong\u003e No more cast-iron glare! The Black coating resists rust, reduces friction for smoother operation, and ensures a maintenance-free experience by avoiding waxing and polishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise height adjustments:\u003c\/strong\u003e 1\/16\" increment height scale allows for exact adjustments, ensuring fine and accurate cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick and accurate adjustments:\u003c\/strong\u003e Large handwheel with positive gear drive enables fast and precise table adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable magnetic controls:\u003c\/strong\u003e Magnetic controls ensure long-lasting durability and consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid support:\u003c\/strong\u003e One-piece welded steel base provides robust support and stability for consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient table movement: \u003c\/strong\u003ePositive gear drive facilitates rapid and accurate table adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 Years of guaranteed excellence: \u003c\/strong\u003eTrust in JET€'s 5-year warranty to ensure your planer remains a top performer and is supported long-term.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead dia.:\u003c\/strong\u003e 3-7\/32\"\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eMin. dust collection:\u003c\/strong\u003e 400 CFM\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eKnife size (L x W x T):\u003c\/strong\u003e 15\" x 15\" x 2.5\"\u003cbr\u003e\u003cstrong\u003eFull width cutting depth:\u003c\/strong\u003e 3\/32\"\u003cbr\u003e\u003cstrong\u003eMax. planing thickness:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eMax. planing width:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eMin. planing length:\u003c\/strong\u003e 6-3\/4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 27\u003cbr\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 5hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eTable size (L x W):\u003c\/strong\u003e 25-3\/4\" x 20\"\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H): \u003c\/strong\u003e37\" x 26\" x 42\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 640 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nBUjUDF2yEg?si=bo_w_zdAYjU1eCts\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":46003055362265,"sku":"JT1-1374","price":5699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/JT1-1374-1.jpg?v=1748882377"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/planers-1\/price_-2000-to-3000.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}