{"title":"All P-System Connectors","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(234, 91, 58);\"\u003e\u003cstrong\u003eNot sure which connectors to choose?\u003c\/strong\u003e\u003c\/span\u003e Visit our \u003ca title=\"Lamello Joinery: Zeta P2, P-System Connectors \u0026amp; More\" href=\"https:\/\/www.oaktreesupply.com\/pages\/lamello-joinery-zeta-p2-p-system-connectors-more\" target=\"_blank\"\u003eLamello Joinery page\u003c\/a\u003e to compare connectors, find info on Lamello tools and accessories, and read common FAQs.\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"lamello-p-system-connector-assortment-in-systainer-basic","title":"Lamello P-System Connector Assortment In Systainer - Basic","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis starter set is the best way to become familiar with some of Lamello's most popular P-System Connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClick on a connector to learn more about it!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(80) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e w\/pre-loaded clips\u003ca rel=\"noopener\" title=\"Lamello Tenso Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-14-starter-kit?variant=46346961453273\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P Medius\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-14-10-flexus-p-system-connectors\" title=\"Lamello Clamex P-14\/10 Flexus P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Flexus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-14-p-system-connectors\" title=\"Lamello Bisco P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTenso P-10\/P-14 Preload Tool\u003c\/li\u003e\n\u003cli\u003eAllen key, 4mm\u003c\/li\u003e\n\u003cli\u003eSystainer T-Loc box with divider\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\" title=\"Lamello P-System Connector Assortment In Systainer - Professional product page\" rel=\"noopener\"\u003eProfessional Set\u003c\/a\u003e with more connectors and accessories is also available.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":38021787713735,"sku":"145321","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/145314.jpg?v=1612814873"},{"product_id":"lamello-p-system-connectors-tenso-p-14","title":"Lamello Tenso P-14 (without preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter connections between 22.5° and 180° — great for obtuse angles and difficult-to-clamp workpieces\u003c\/li\u003e\n\u003cli\u003eTenso Connectors without the preload clip are ideal for smaller projects where only one or two connectors are used\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse with \u003ca rel=\"noopener\" title=\"Lamello Tenso P-14 Preload Clips product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" target=\"_blank\"\u003epreload clips\u003c\/a\u003e (sold separately) for easier and more precise alignment\u003c\/li\u003e\n\u003cli\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-14-starter-kit\" title=\"Lamello Tenso P-14 Starter Set\" rel=\"noopener\" target=\"_blank\"\u003eStarter Set\u003c\/a\u003e with pre-load clips and installation tool included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-14 is a self-clamping connector with three functions: alignment, clamping, and connecting. The very high level of clamping force allows workpieces to be glued without the need for screw clamps or pressure. This time-saving technique allows projects to be installed piece by piece instead of being required to glue everything at the same time, clamp, and wait for glue to dry.\u003c\/p\u003e\n\u003cp\u003eThe Tenso without preload clip is ideal for smaller items of furniture when only one or two connectors are used. Smaller workpieces and 90° connections in particular are easily glued without the preload clip. Using the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" title=\"Lamello Tenso P-14 Preload Clips product page\" rel=\"noopener\" target=\"_blank\"\u003eP-14 Preload Clips\u003c\/a\u003e prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eBased on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the workpiece in just seconds. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed, and simplicity throughout the entire design, production, transport, and assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. If using the optional preload clips, snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-14 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConcealed, self-clamping connector\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 x 27 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 33 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NGwy7pxFyn8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650369306823,"sku":"145415","price":105.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39650383462599,"sku":"145425","price":375.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650369339591,"sku":"145435","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-14main.jpg?v=1776709426"},{"product_id":"lamello-divario-p-18-starter-kit-with-systainer","title":"Lamello Divario P-18 Starter Kit With Systainer","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelf-clamping, completely invisible joint for inserting shelves or partitions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAssemble by sliding in between two fixed sides or shelves using a guide groove\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo resistance while inserting until shortly before clamping force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick installation with no glue or clamps required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for wall and shelving units, wine racks, large furniture, etc.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDivario Connectors make it easy to retrofit shelves or partition walls into pre-assembled cabinets and casework. A groove is routed into the edge of the shelf, where the female connector is inserted. The shelf is then slid between two fixed sides until the female connector engages and clamps onto the male connector. Because clamping occurs only at specific points, rather than along the entire insertion length, installation is smoother and requires less force.\u003c\/p\u003e\n\u003cp\u003eNeither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation, or assembly. The connector can be fully or only partially fitted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eZeta P2 only\u003c\/em\u003e: Remove the front friction tabs by carefully popping them off with a utility knife.\u003c\/li\u003e\n\u003cli\u003eMark the center of the workpiece edge where the groove will be cut.\u003c\/li\u003e\n\u003cli\u003eInstall the stop square on the Zeta. Align the Zeta’s center mark with your layout mark and lock the stop square in place.\u003c\/li\u003e\n\u003cli\u003eSet the Zeta with the bottom depth knob at 0 and the top knob at OFF. Cut the edge using the stop square reference notches: start at the center notch and stop at the right-hand notch to prevent blowout.\u003c\/li\u003e\n\u003cli\u003eSet the top knob to 18 and the bottom knob to MAX. Reinstall the friction tabs. Align the stop square with the workpiece edge and cut the Divario groove at both ends of the edge.\u003c\/li\u003e\n\u003cli\u003eInsert the female connector into the groove using the installation tool. Seat it fully with a dead-blow hammer.\u003c\/li\u003e\n\u003cli\u003eOn the mating workpiece surface, mark the centerline. Use the marking jig to mark the two 8mm hole locations by aligning the center notch and tapping the jig to create drill divots.\u003c\/li\u003e\n\u003cli\u003eDrill the 8mm holes, insert the male connectors, and tap them flush with a hammer.\u003c\/li\u003e\n\u003cli\u003eSlide the shelf (female connectors) onto the mating piece (male connectors) until fully engaged. Tap gently with a hammer if needed. (See secondary images)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDivario P-18 Connectors are available in a few different versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Lamello Divario P-18 Connectors page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-divario-p-18\" target=\"_blank\"\u003eIndividual Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-connector-basic-starter-set\" target=\"_blank\" title=\"Lamello Divario P-18 Connector Basic Starter Set product page\" rel=\"noopener\"\u003eStarter Set w\/installation tool \u0026amp; plastic marking jig\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Professiona product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eP-System Connector Assortment \u003c\/a\u003e(comes with many other types of P-System Connectors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely invisible joint for the highest quality standards\u003c\/li\u003e\n\u003cli\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/li\u003e\n\u003cli\u003eEfficient machining and installation with a CNC or a Zeta based on the P-System\u003c\/li\u003e\n\u003cli\u003eNarrow element for the use in shelves with a minimum thickness of 19mm\u003c\/li\u003e\n\u003cli\u003eNo resistance while inserting until shortly before building the clamping force\u003c\/li\u003e\n\u003cli\u003eInsertion of shelves after transport for lower transport weight\u003c\/li\u003e\n\u003cli\u003eConnectors insert by hand or install by hammer or mallet\u003c\/li\u003e\n\u003cli\u003eDrilling into the surface possible with a CNC machine without angle aggregates (e.g. nesting machines)\u003c\/li\u003e\n\u003cli\u003eMachining is possible in the factory or on site with a CNC or a Zeta P2\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength\u003c\/li\u003e\n\u003cli\u003eNo clamps necessary\u003c\/li\u003e\n\u003cli\u003eTransport the empty cabinet to save weight\u003c\/li\u003e\n\u003cli\u003eAssembly of the complete piece on site possible (flat pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 x 25 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLongitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~162 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~239 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~235 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) Divario P-18 Connectors\u003c\/li\u003e\n\u003cli\u003eDivario Installation Tool\u003c\/li\u003e\n\u003cli\u003eMetal Marking Jig\u003c\/li\u003e\n\u003cli\u003eDrill bit \u0026amp; stop collar\u003c\/li\u003e\n\u003cli\u003eSystainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":39650372387015,"sku":"145552","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Lamello-P-18-3.jpg?v=1631122657"},{"product_id":"lamello-p-system-connectors-clamex-p-10","title":"Lamello Clamex P-10 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable, two-part connection (metal lever locks \u0026amp; unlocks connector)\u003c\/li\u003e\n\u003cli\u003eSimilar to \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e but has a shallower installation depth of 10mm, so it is ideal for thinner material\u003c\/li\u003e\n\u003cli\u003eCan be used for butt joints in material as thin as 12mm\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca rel=\"noopener\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003eIdeal for miter joints and sharp angles in furniture, kitchen manufacturing, open shelves, outside crown molding, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-10 works just like Clamex P-14, but has a shallower installation depth of 10mm. Clamex P-10 Connectors are therefore ideal for thinner materials where a deeper groove is not needed or even possible. They can also be used for miter joints in outside crown molding as thin as 15mm!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello P-System Tooling\" rel=\"noopener\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eSlide P-10 Connectors into their respective grooves.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and lock the P-10 together using a 4mm Allen Key or the flexible \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex P-10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable miter connector\u003c\/li\u003e\n\u003cli\u003eMinimal installation depth for thin materials\u003c\/li\u003e\n\u003cli\u003eNearly invisible with its 6mm tool opening\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eHigh clamping force for gluing components at all angles\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 0.5 mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 9.7mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e ~118 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e ~154 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e ~198 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5rF31Cn4tgM\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650372780231,"sku":"145372","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39650372812999,"sku":"145373","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650372845767,"sku":"145374","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/clamex-p10.jpg?v=1663173946"},{"product_id":"lamello-p-system-connectors-divario-p-18","title":"Lamello Divario P-18 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelf-clamping, completely invisible joint for inserting shelves or partitions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAssemble by sliding in between two fixed sides or shelves using a guide groove\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo resistance while inserting until shortly before clamping force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick installation with no glue or clamps required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for wall and shelving units, wine racks, large furniture, etc.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDivario Connectors make it easy to retrofit shelves or partition walls into pre-assembled cabinets and casework. A groove is routed into the edge of the shelf, where the female connector is inserted. The shelf is then slid between two fixed sides until the female connector engages and clamps onto the male connector. Because clamping occurs only at specific points, rather than along the entire insertion length, installation is smoother and requires less force.\u003c\/p\u003e\n\u003cp\u003eNeither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation, or assembly. The connector can be fully or only partially fitted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eZeta P2 only\u003c\/em\u003e: Remove the front friction tabs by carefully popping them off with a utility knife.\u003c\/li\u003e\n\u003cli\u003eMark the center of the workpiece edge where the groove will be cut.\u003c\/li\u003e\n\u003cli\u003eInstall the stop square on the Zeta. Align the Zeta’s center mark with your layout mark and lock the stop square in place.\u003c\/li\u003e\n\u003cli\u003eSet the Zeta with the bottom depth knob at 0 and the top knob at OFF. Cut the edge using the stop square reference notches: start at the center notch and stop at the right-hand notch to prevent blowout.\u003c\/li\u003e\n\u003cli\u003eSet the top knob to 18 and the bottom knob to MAX. Reinstall the friction tabs. Align the stop square with the workpiece edge and cut the Divario groove at both ends of the edge.\u003c\/li\u003e\n\u003cli\u003eInsert the female connector into the groove using the \u003ca rel=\"noopener\" title=\"Lamello Divario Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-installation-tool\" target=\"_blank\"\u003eDivario Installation Tool\u003c\/a\u003e (sold separately). Seat it fully with a dead-blow hammer.\u003c\/li\u003e\n\u003cli\u003eOn the mating workpiece surface, mark the centerline. Use the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-marking-jig\" title=\"Lamello Divario Marking Jig product page\" rel=\"noopener\" target=\"_blank\"\u003eDivario Marking Jig\u003c\/a\u003e (sold separately) to mark the two 8mm hole locations by aligning the center notch and tapping the jig to create drill divots.\u003c\/li\u003e\n\u003cli\u003eDrill the 8mm holes, insert the male connectors, and tap them flush with a hammer.\u003c\/li\u003e\n\u003cli\u003eSlide the shelf (female connectors) onto the mating piece (male connectors) until fully engaged. Tap gently with a hammer if needed. (See secondary images)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDivario P-18 Connectors are available in a few different versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Lamello Divario P-18 Connector Basic Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-connector-basic-starter-set\" target=\"_blank\"\u003eStarter Set w\/Installation Tool \u0026amp; Plastic Marking Jig\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-starter-kit-with-systainer\" title=\"Lamello Divario P-18 Starter Kit in Systainer product page\" rel=\"noopener\" target=\"_blank\"\u003eStarter Kit w\/Installation Tool, Metal Marking Jig, and Drill Bit w\/Stop Collar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Professiona product page\" rel=\"noopener\" target=\"_blank\"\u003eP-System Connector Assortment \u003c\/a\u003e(comes with many other types of P-System Connectors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely invisible joint for the highest quality standards\u003c\/li\u003e\n\u003cli\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/li\u003e\n\u003cli\u003eEfficient machining and installation with a CNC or a Zeta based on the P-System\u003c\/li\u003e\n\u003cli\u003eNarrow element for the use in shelves with a minimum thickness of 19mm\u003c\/li\u003e\n\u003cli\u003eNo resistance while inserting until shortly before building the clamping force\u003c\/li\u003e\n\u003cli\u003eInsertion of shelves after transport for lower transport weight\u003c\/li\u003e\n\u003cli\u003eConnectors insert by hand or install by hammer or mallet\u003c\/li\u003e\n\u003cli\u003eDrilling into the surface possible with a CNC machine without angle aggregates (e.g. nesting machines)\u003c\/li\u003e\n\u003cli\u003eMachining is possible in the factory or on site with a CNC or a Zeta P2\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength\u003c\/li\u003e\n\u003cli\u003eNo clamps necessary\u003c\/li\u003e\n\u003cli\u003eTransport the empty cabinet to save weight\u003c\/li\u003e\n\u003cli\u003eAssembly of the complete piece on site possible (flat pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 x 25 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLongitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~162 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~239 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~235 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6hakzHLkvjk?si=9d-himOYGltg--Dm\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650384543943,"sku":"145550","price":125.0,"currency_code":"USD","in_stock":false},{"title":"300 Pair","offer_id":39650384576711,"sku":"145560","price":435.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650384609479,"sku":"145570","price":1290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/divariop18-1.jpg?v=1707499826"},{"product_id":"lamello-p-system-connectors-clamex-p-14","title":"Lamello Clamex P-14 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDetachable furniture connection (metal lever locks \u0026amp; unlocks connector)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" rel=\"noopener\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be used for all angle \u0026amp; miter joints from 30° to 180°\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh clamping force over 200 lbs. at all angles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo gluing necessary\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for shelves, cabinets, desks, book cases, wine racks, etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse with \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P-14\/10 Medius\u003c\/a\u003e when shelves are attached to the dividing panel at the same height (Clamex P-14 can be used when dividing panel is greater than or equal to 29mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-14 is a detachable, two part connector that is extremely easy to install. These connectors feature an internal cam lock that is engaged with a 4mm Allen key or optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. Disengaging the cam lock allows you to take apart the workpiece, which is especially useful when moving or needing to utilize true flat pack delivery. Clamex P needs neither glue nor screws, saving you lots of time in the joinery process.\u003c\/p\u003e\n\u003cp\u003eClamex P-14 has a very shallow installation depth of 14mm. It can be used for miter joints in material as thin as 18mm, and for butt joints in material as thin as 15mm. These connectors are a popular choice for open shelf units, large pieces of furniture, and angled counters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eSlide P-14 Connectors into their respective grooves.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and lock the P-14 together using a 4mm Allen Key or the flexible \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex P-14 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable miter connector for 30° - 180° angles and all butt joints\u003c\/li\u003e\n\u003cli\u003eMinimal tool opening of just 6mm\u003c\/li\u003e\n\u003cli\u003eFast, simple installation\u003c\/li\u003e\n\u003cli\u003eStackable components for transport with connectors pre-installed (internal connectors means no external damage!)\u003c\/li\u003e\n\u003cli\u003eHigh clamping force over 200 lbs. per connector for joinery at all angles\u003c\/li\u003e\n\u003cli\u003eNo glue or screws needed\u003c\/li\u003e\n\u003cli\u003eOften used in furniture, shelves, book cases, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTensile strength MDF:\u003c\/strong\u003e ~266 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength Particle board:\u003c\/strong\u003e ~235 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength Beech:\u003c\/strong\u003e ~411 lbs.\u003cbr\u003e\u003cstrong\u003eMin. workpiece width (miter joints):\u003c\/strong\u003e 18mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width (butt joints):\u003c\/strong\u003e 15mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eSize (mm):\u003c\/strong\u003e 64 x 27 x 9.7mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/t96ye8emAA8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39940927127751,"sku":"145334","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39940927160519,"sku":"145346","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39940927193287,"sku":"145356","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/clamexp-14main.jpg?v=1705004959"},{"product_id":"lamello-p-system-connectors-tenso-preload-clips","title":"Lamello Tenso P-14 Preload Clips","description":"\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUsing the P-14 Preload Clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eAlso ideal for larger projects when several connectors must be assembled simultaneously in a row.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"300","offer_id":39940927422663,"sku":"145426","price":85.0,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":39940927455431,"sku":"145436","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensopreloadedclip.jpg?v=1724867731"},{"product_id":"lamello-clamex-medius-p-14-10-dividing-panel-connectors","title":"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable connectors for shelving units where two shelves meet the dividing panel at the same height\u003c\/li\u003e\n\u003cli\u003eTwo–part connector: a Clamex P-14 top half, and a Medius P-10 bottom half\u003c\/li\u003e\n\u003cli\u003eFor dividing panels as thin as 16mm\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" rel=\"noopener\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHigh clamping force over 100 lbs. at all angles\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003eIdeal for diving panel connections in shelves, cupboards, wine racks, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex Medius P-14\/10 consists of two connectors: a Clamex P-14 top half, and a Medius P-10 bottom half. As a complement to \u003ca title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14 Connectors\u003c\/a\u003e, Clamex Medius is designed for shelving units where two shelves meet the dividing panel at the same height. Common projects that would use Clamex Medius are cupboards, bookshelves, entertainment stands, and wine racks.\u003c\/p\u003e\n\u003cp\u003eClamex Medius has different installation depths. The Clamex P-14 top half (with the lever) is installed in the shelf, anchored in a 14mm deep P-System groove. The bottom half (Medius P-10) can be fitted back-to-back in a dividing panel measuring just 16mm (5\/8\") in thickness thanks to its 10mm installation depth.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Zeta P2 to make a surface cut with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSet the depth adjustment to 14 and make a cut in the edge of the shelf where you will connect it to the other workpiece to create a dividing panel.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eInsert the P-14 connector into the shelf groove, and the Medius P-10 into the surface groove to join the workpieces together.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and secure the joint via the access hole using a 4mm Allen Key or the flexible \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex Medius P-14\/10 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for dividing panels in shelves, cabinets, entertainment centers, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame positioning of P-System grooves on both sides possible for dividing panels with a minimum thickness of 16mm (5\/8\")\u003c\/li\u003e\n\u003cli\u003eMinimal tool opening of just 6mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport, with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 or a CNC with P-System tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize (top half):\u003c\/strong\u003e 64 x 13.5 x 9.7mm\u003cbr\u003e\u003cstrong\u003eSize (bottom half):\u003c\/strong\u003e 52 x 7.5 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness for dividing panel:\u003c\/strong\u003e 16mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board): \u003c\/strong\u003e136 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e 178 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e 242 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/acQy85GrK8Y\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362339225817,"sku":"145370","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362339258585,"sku":"145371","price":610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/clamex-medius.jpg?v=1663171332"},{"product_id":"lamello-clamex-p-14-10-flexus-p-system-connectors","title":"Lamello Clamex P-14\/10 Flexus P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable, two-part connector that operates the same as Clamex P-14\/10 Medius, but has flexible positioning pins for joints in hard-to-reach applications\u003c\/li\u003e\n\u003cli\u003eCan also be used for retrofitting shelves to existing furniture\u003c\/li\u003e\n\u003cli\u003eMinimal installation depth for material as thin as 12mm for surface or corner joints\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca rel=\"noopener\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture construction, wine racks, bookshelves, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-14\/10 Flexus Connectors operate the same way as \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P-14\/10 Medius\u003c\/a\u003e, except that they have flexible positioning pins. The flexible pins allow the workpiece components to be slid and “snapped” into place since the tabs retract until they find their mating half. This makes Clamex P-14\/10 Flexus ideal for joints in hard-to-reach applications, as well as for retrofitting shelves to existing furniture.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Zeta P2 to make a surface cut with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello P-System Tooling\" rel=\"noopener\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSet the depth adjustment to 14 and make a cut in the edge of the shelf where you will connect it to the other workpiece to create a dividing panel.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eInsert the P-14 Flexus connector into the shelf groove, and the Medius P-10 into the surface groove to join the workpieces together.\u003c\/li\u003e\n\u003cli\u003eConnect the workpieces by sliding one into the other until it snaps into place.\u003c\/li\u003e\n\u003cli\u003eSecure the joint via the access hole using a 4mm Allen Key or the flexible \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (Sold separately. See secondary images.)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex Flexus P-14\/10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal installation depth for material as thin as 12mm for surface or corner joints\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNearly invisible with its 6mm tool opening\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eFlexible positioning pins allow for a wide variety of installation options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 64 × 13.5 × 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 0mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e ~132 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e ~158 lbs.\u003cstrong\u003e\u003cbr\u003eTensile strength (beech):\u003c\/strong\u003e ~178 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/esr0k2PtQlI\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362420359385,"sku":"145315","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362420424921,"sku":"145316","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":43362420457689,"sku":"145317","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/flexus.jpg?v=1663173659"},{"product_id":"lamello-bisco-p-14-p-system-connectors","title":"Lamello Bisco P-14 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic biscuit that fits the same groove as the Clamex P-14 Connectors — no need to change cutters\u003c\/li\u003e\n\u003cli\u003eUsed in combination with Clamex P-14 or Tenso P-14\u003c\/li\u003e\n\u003cli\u003eFor the flush alignment of panels, as well as for \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003egluing\u003c\/a\u003e, stiffening, and increasing shear strength\u003c\/li\u003e\n\u003cli\u003eAlso good for dry-fitting connections prior to final assembly with Clamex or Tenso\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBisco P-14 plastic biscuits are an alignment element designed to be used with \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14 Connectors\u003c\/a\u003e. They ensure the flush alignment of panels, as well as increase connection strength. Bisco P Connectors are also good for dry-fitting connections prior to final assembly with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThanks to their surface structure, Bisco P-14 Connectors are self-clamping, meaning there is no gluing inside the groove required. The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters. Ideal for dry connections or when still deciding whether the parts will be glued or should be detachable.\u003c\/p\u003e\n\u003cp\u003eBisco P-14 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eLooking for the smaller connectors? See \u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003cstrong\u003e\u003ca style=\"color: rgb(112, 151, 62);\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-10-p-system-connectors\" title=\"Lamello Bisco P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-10 \u0026gt;\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFits the same P-System groove as Clamex P-14, thus removing the need to change cutters\u003c\/li\u003e\n\u003cli\u003eSelf-clamping in the groove due to its surface structure\u003c\/li\u003e\n\u003cli\u003eFixed connections possible in conjunction with PVA glue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003cli\u003eAlignment of grooves on separation walls, table tops, or kitchen worktops\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-14 for detachable surface, corner or miter joints ranging from 30° to 180°\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-14 or as a simple element for gluing workpieces\u003c\/li\u003e\n\u003cli\u003eStiffening or raising shear strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 65 x 27 x 7mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance longitudinal:\u003c\/strong\u003e ± 2mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/TQmQRB0eVjc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80","offer_id":43362537701593,"sku":"145301","price":50.0,"currency_code":"USD","in_stock":true},{"title":"300","offer_id":43362537734361,"sku":"145302","price":145.0,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":43362537767129,"sku":"145303","price":395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/BiscoP14main.jpg?v=1764185813"},{"product_id":"lamello-tenso-p-10-p-system-connectors","title":"Lamello Tenso P-10 (with preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks just like \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e, but has a smaller installation depth and can be used in thinner materials\u003c\/li\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter and bevel connections\u003c\/li\u003e\n\u003cli\u003eUse with preload clips for precise alignment and more adjustability\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses. Developed for miters (45°) from a material thickness of 15mm or butt joints (90°) from a panel thickness of 12mm, the Tenso P-10 is ideal for glued furniture, components, small shelving units, door frames, trim, false edges, cubbies, plate racks, etc.\u003cbr\u003e\u003cbr\u003eUsing the preload clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. Use the preload clip installation tool to snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: All Tenso P-10 boxes are sold with the corresponding amount of pre-load clips and one pre-load clip installation tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFor thin materials\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 30 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/y7KEsFOZINI?si=ZzA_FPxUIM-fvAyc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362580693209,"sku":"145418","price":125.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362580725977,"sku":"145428","price":420.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":43362580758745,"sku":"145438","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-10withclipmain.jpg?v=1765983421"},{"product_id":"lamello-p-system-connector-assortment-in-systainer-professional","title":"Lamello P-System Connector Assortment In Systainer - Professional","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis starter set is the best way to become familiar with Lamello's line of P-System Connectors. It even includes the necessary accessories for a seamless joining process, like the Clamex Drill Bit used to make the 6mm access hole, the flexible Clamex Installation Tool, and the Divario Installation Tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClick on a connector to learn more about it!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(120) \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P Medius\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14\/10 Flexus P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-14-10-flexus-p-system-connectors\" target=\"_blank\"\u003eClamex P Flexus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" title=\"Lamello Clamex P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca rel=\"noopener\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e w\/clip\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Tenso P-10 (with preload clip) P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-10-p-system-connectors\" target=\"_blank\"\u003eTenso P-10\u003c\/a\u003e w\/clip\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-14-p-system-connectors\" title=\"Lamello Bisco P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-10-p-system-connectors\" title=\"Lamello Bisco P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca rel=\"noopener\" title=\"Lamello Divario P-18 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-divario-p-18\" target=\"_blank\"\u003eDivario P-18\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDivario Installation Tool\u003c\/li\u003e\n\u003cli\u003eClamex Drill bit with jig\u003c\/li\u003e\n\u003cli\u003eClamex P Installation Tool\u003c\/li\u003e\n\u003cli\u003eSortainer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":43362667528409,"sku":"145323","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/145323-1.jpg?v=1729863752"},{"product_id":"lamello-divario-p-18-marking-jig","title":"Lamello Divario P-18 Marking Jig","description":"\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello-divario-p-connectors\" title=\"All Lamello Divario P-System Connectors\" rel=\"noopener\" target=\"_blank\"\u003eLamello Divario P-18 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis jig allows you to easily create the two 8mm holes needed for the male half Divario P-18 Connectors with a power drill. Eliminates the need for a CNC!\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":45954857074905,"sku":"125510","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/divariop18jig.jpg?v=1727102191"},{"product_id":"lamello-divario-p-18-installation-tool","title":"Lamello Divario P-18 Installation Tool","description":"\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello-divario-p-connectors\" title=\"All Lamello Divario P-System Connectors\" rel=\"noopener\" target=\"_blank\"\u003eLamello Divario P-18 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eInstallation tool for fixing the Divario Connector in a workpiece. Use a dead-blow hammer to tap the black part of the tool and ensure the connector is firmly intact (see secondary image).\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":45954860908761,"sku":"125500","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/divarioinstallationtool.jpg?v=1727102617"},{"product_id":"lamello-tenso-p-14-starter-kit","title":"Lamello Tenso P-14 Starter Kit","description":"\u003cp\u003e\u003cspan\u003eThis kit includes 80 Tenso P-14 Connectors, 80 pre-loaded clips, and a pre-load clip insertion tool!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter connections between 22.5° and 180° — great for obtuse angles and difficult-to-clamp workpieces\u003c\/li\u003e\n\u003cli\u003eTenso Connectors without the preload clip are ideal for smaller projects where only one or two connectors are used\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse with the preloaded clips for easier and more precise alignment, or for larger projects when several connectors must be assembled simultaneously in a row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-14 is a self-clamping connector with three functions: alignment, clamping, and connecting. The very high level of clamping force allows workpieces to be glued without the need for screw clamps or pressure. This time-saving technique allows projects to be installed piece by piece instead of being required to glue everything at the same time, clamp, and wait for glue to dry.\u003c\/p\u003e\n\u003cp\u003eThe Tenso without preload clip is ideal for smaller items of furniture when only one or two connectors are used. Smaller workpieces and 90° connections in particular are easily glued without the preload clip. Using the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" title=\"Lamello Tenso P-14 Preload Clips product page\" rel=\"noopener\" target=\"_blank\"\u003eP-14 Preload Clips\u003c\/a\u003e prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eBased on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the workpiece in just seconds. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed, and simplicity throughout the entire design, production, transport, and assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. If using the preload clips, snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-14 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConcealed, self-clamping connector\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 x 27 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 33 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) Tenso P-14 Connectors\u003c\/li\u003e\n\u003cli\u003e(80) Preloaded clips\u003c\/li\u003e\n\u003cli\u003ePreload clip installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/NGwy7pxFyn8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46346961453273,"sku":"145415S","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/tensop-14starterkit_525a22e4-b332-4472-b691-b1ec2cda4722.jpg?v=1738100166"},{"product_id":"lamello-lc-p-16x11-p-system-connectors-80-pack","title":"Lamello LC P-16x11 P-System Connectors - 80 Pack","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter) (sold separately)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" title=\"Lamello Clamex P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector (sold separately)\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" rel=\"noopener\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e (sold separately), grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16x11 is suitable for material with a minimum edge thickness of 12mm. Also available as \u003ca rel=\"noopener\" title=\"Lamello LC P-16x17 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x17-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x17\u003c\/a\u003e (minimum 22mm) and \u003ca rel=\"noopener\" title=\"Lamello LC P-16x22 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x22-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x22\u003c\/a\u003e (minimum 27mm). An \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16-p-system-connector-starter-set\" title=\"Lamello LC P-16 P-System Connector Starter Set product page\" rel=\"noopener\" target=\"_blank\"\u003eLC P-16 Starter Set\u003c\/a\u003e that includes all necessary connectors and accessories is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca rel=\"noopener\" title=\"Lamello LC P-16 Configurator\" href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 16mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=bJkf-XxZawYCB7fY\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46613375254745,"sku":"145710","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x11.jpg?v=1746731269"},{"product_id":"lamello-lc-p-16x11-p-system-connector-set-includes-clamex-p-14-10","title":"Lamello LC P-16x11 P-System Connector Set (Includes Clamex P-14\/10)","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca rel=\"noopener\" title=\"Lamello Clamex P-10 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca rel=\"noopener\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e, grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThis set includes (80) LC P-16x11 connectors, and (80) Clamex P-14\/10.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" rel=\"noopener\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca rel=\"noopener\" title=\"Lamello LC P-16 Configurator\" href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 16mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) LC P-16×11 connectors\u003c\/li\u003e\n\u003cli\u003e(80) Clamex P-14\/10\u003c\/li\u003e\n\u003cli\u003eDepth adjuster cap 2mm\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46613728690393,"sku":"145712","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x11SET.jpg?v=1746734414"},{"product_id":"lamello-lc-p-16x17-p-system-connectors-80-pack","title":"Lamello LC P-16x17 P-System Connectors - 80 Pack","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter) (sold separately)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" title=\"Lamello Clamex P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector (sold separately)\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" rel=\"noopener\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e (sold separately), grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16x17 is suitable for material with a minimum edge thickness of 22mm. Also available as \u003ca rel=\"noopener\" title=\"Lamello LC P-16x11 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x11-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x11\u003c\/a\u003e (minimum 12mm) and \u003ca rel=\"noopener\" title=\"Lamello LC P-16x22 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x22-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x22\u003c\/a\u003e (minimum 27mm). An \u003ca rel=\"noopener\" title=\"Lamello LC P-16 P-System Connector Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16-p-system-connector-starter-set\" target=\"_blank\"\u003eLC P-16 Starter Set\u003c\/a\u003e that includes all necessary connectors and accessories is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" rel=\"noopener\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" title=\"Lamello LC P-16 Configurator\" rel=\"noopener\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621414818009,"sku":"145720","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x17.jpg?v=1747147428"},{"product_id":"lamello-lc-p-16x17-p-system-connector-set-includes-clamex-p-14-10","title":"Lamello LC P-16x17 P-System Connector Set (Includes Clamex P-14\/10)","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca rel=\"noopener\" title=\"Lamello Clamex P-10 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca rel=\"noopener\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e, grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThis set includes (80) LC P-16x17 connectors, and (80) pairs of Clamex P-14\/10.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" title=\"Lamello LC P-16 Configurator\" rel=\"noopener\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) LC P-16×17 connectors\u003c\/li\u003e\n\u003cli\u003e(80) Clamex P-14\/10 pairs\u003c\/li\u003e\n\u003cli\u003eDepth adjuster cap 2mm\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621428482265,"sku":"145722","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x17SET.jpg?v=1747149702"},{"product_id":"lamello-lc-p-16x22-p-system-connectors-80-pack","title":"Lamello LC P-16x22 P-System Connectors - 80 Pack","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter) (sold separately)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca rel=\"noopener\" title=\"Lamello Clamex P-10 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector (sold separately)\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca rel=\"noopener\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e (sold separately), grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16x22 is suitable for material with a minimum edge thickness of 27mm. Also available as \u003ca rel=\"noopener\" title=\"Lamello LC P-16x11 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x11-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x11\u003c\/a\u003e (minimum 12mm) and \u003ca rel=\"noopener\" title=\"Lamello LC P-16x17 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16x17-p-system-connectors-80-pack\" target=\"_blank\"\u003eP-16x17\u003c\/a\u003e (minimum 22mm). An \u003ca rel=\"noopener\" title=\"Lamello LC P-16 P-System Connector Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-lc-p-16-p-system-connector-starter-set\" target=\"_blank\"\u003eLC P-16 Starter Set\u003c\/a\u003e that includes all necessary connectors and accessories is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" rel=\"noopener\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca rel=\"noopener\" title=\"Lamello LC P-16 Configurator\" href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility: \u003c\/strong\u003eIdeal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 27mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621450207449,"sku":"145730","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x22.jpg?v=1747151565"},{"product_id":"lamello-lc-p-16x22-p-system-connector-set-includes-clamex-p-14-10","title":"Lamello LC P-16x22 P-System Connector Set (Includes Clamex P-14\/10)","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca rel=\"noopener\" title=\"Lamello Clamex P-10 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm \u003ca rel=\"noopener\" title=\"Lamello P-System Depth Adjuster Cap for LC P-16 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-depth-adjuster-cap-for-lc-p-16\" target=\"_blank\"\u003eadjuster cap\u003c\/a\u003e, grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThis set includes (80) LC P-16x22 connectors, and (80) pairs of Clamex P-14\/10.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap (sold separately) installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-insert-with-p-16-element\" title=\"Lamello Clamex P Drill Jig Insert with P-16 Element product page\" rel=\"noopener\" target=\"_blank\"\u003eP-16 Insert Element\u003c\/a\u003e (sold separately) to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca rel=\"noopener\" title=\"Lamello LC P-16 Configurator\" href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Edge Cuts:\u003c\/strong\u003e 27mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) LC P-16×22 connectors\u003c\/li\u003e\n\u003cli\u003e(80) Clamex P-14\/10 pairs\u003c\/li\u003e\n\u003cli\u003eDepth adjuster cap 2mm\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621457875161,"sku":"145732","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16x22SET.jpg?v=1747152088"},{"product_id":"lamello-lc-p-16-p-system-connector-starter-set","title":"Lamello LC P-16 P-System Connector Starter Set","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an adapter for \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e (Clamex half with lever is slid into the LC P-16 adapter)\u003c\/li\u003e\n\u003cli\u003eSurface groove uses a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" title=\"Lamello Clamex P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e bottom half connector\u003c\/li\u003e\n\u003cli\u003eFor use in lightweight panels like honeycomb or foam core—eliminates the need to install concealed edges for connectors\/hardware to fit and stay secure\u003c\/li\u003e\n\u003cli\u003eSuitable for material with a minimum edge thickness of 12mm\u003c\/li\u003e\n\u003cli\u003eThree sizes for different panel and material thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture and assemblies in lightweight construction, retail displays, caravans, and shipbuilding\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 is a specialized Lamello P-System connector for lightweight panels such as cardboard \u0026amp; plastic honeycomb, MDF, and hard foam. The main advantage of the LC P-16 is that it eliminates the need for concealed edges. Designed for builders, fabricators, and interior specialists, the LC P-16 combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint.\u003c\/p\u003e\n\u003cp\u003eThe LC P-16 acts as a receiver for Clamex P-14 connector halves, creating durable joints in lightweight panels. Using a Zeta P2 joiner with an 18mm depth setting and 2mm adjuster cap, grooves can be cut directly into honeycomb materials. For precision, the Clamex P drill jig with interchangeable P-16 insert ensures perfect alignment, while a CNC with P-System capability can also be used.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the LC P-16 allows you to connect panels just like any other Clamex P connector. The results are strong, clean joints that look professional and hold up under demanding use.\u003c\/p\u003e\n\u003cp\u003eThis set includes (20) LC P-16x11 connectors, (20) LC P-16x17 connectors, (20) LC P-16x22 connectors, (20) pairs of Clamex P-14\/10 connectors, a positioning clip, a Clamex P drill jig, a depth adjuster cap, and an Allen key.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThese instructions are for the Zeta P2. Can also be done with a CNC. It's always best to confirm with your CNC's manufacturer to determine what all you need for making the P-System groove.\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWith the Zeta P2 depth set to 18, and the 2mm depth adjuster cap installed, cut the 16mm grooves in your workpiece edge.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Drill Jig\u003c\/a\u003e (sold separately) and the P-16 Insert Element to create the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eRemove the depth adjuster cap and set the Zeta depth to 10. Make the surface grooves.\u003c\/li\u003e\n\u003cli\u003eInsert the LC P-16 connector into the machined groove, then slide a Clamex P-14 connector half with the lever into the LC P-16.\u003c\/li\u003e\n\u003cli\u003eInsert a bottom half Clamex P-10 connector into the surface groove.\u003c\/li\u003e\n\u003cli\u003eAssemble the joint by sliding the two workpieces together, then locking the connector in place via the 6mm access hole with a 4mm Allen key or \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately). See secondary images as well as the “Video” tab to learn more.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Use Lamello's \u003ca href=\"https:\/\/lamello.com\/solutions\/lamello-expertise\/lc-p-16-configurator\" title=\"Lamello LC P-16 Configurator\" rel=\"noopener\" target=\"_blank\"\u003eLC P-16 Configurator\u003c\/a\u003e to determine what size connector to use and which Zeta P2 cutting positions are ideal.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo concealed edging required:\u003c\/strong\u003e Time-saving anchorage directly in the surface layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast installation:\u003c\/strong\u003e Inserting instead of screwing or gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Ideal for use with Clamex P-14, but can also be used with Clamex P-14 Flexus and Clamex P-14 CNC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of materials and thicknesses:\u003c\/strong\u003e Three product sizes available for various lightweight panel applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong P-System anchorage:\u003c\/strong\u003e Form-locking anchorage across large surface areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Longitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eInstallation Tolerance:\u003c\/strong\u003e Radial ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Surface Cuts:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eMin. Material Thickness for Center Panel:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eMin. Workpiece Width:\u003c\/strong\u003e 73.5mm\u003cbr\u003e\u003cstrong\u003eLC P-16x11 min. edge thickness:\u003c\/strong\u003e 12mm\u003cbr\u003e\u003cstrong\u003eLC P-16x17 min. edge thickness:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eLC P-16x22 min. edge thickness:\u003c\/strong\u003e 27mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(20) LC P-16x11 connectors\u003c\/li\u003e\n\u003cli\u003e(20) LC P-16x17 connectors\u003c\/li\u003e\n\u003cli\u003e(20) LC P-16x22 connectors\u003c\/li\u003e\n\u003cli\u003e(20) Clamex P-14\/10 connectors\u003c\/li\u003e\n\u003cli\u003ePositioning clip\u003c\/li\u003e\n\u003cli\u003eClamex P drill jig\u003c\/li\u003e\n\u003cli\u003eDepth adjuster cap 2mm\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/a4f0H8615Xw?si=COnPkgeb9Zg9LDHA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621682467033,"sku":"145700","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/LCP-16StarterSet_3ee4cd43-f0e5-479a-8392-12e82cf1aad8.jpg?v=1747169622"},{"product_id":"lamello-p-system-depth-adjuster-cap-for-lc-p-16","title":"Lamello P-System Depth Adjuster Cap for LC P-16","description":"\u003cp\u003eP-System depth adjuster cap for Lamello \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\" title=\"All Lamello Biscuit Joiners\" rel=\"noopener\"\u003eZeta P2 Joiners\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello-lc-p-16-connectors-accessories\" target=\"_blank\" title=\"Lamello LC P-16 Connectors \u0026amp; Accessories\" rel=\"noopener\"\u003eLC P-16 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen using the Zeta P2 combined with LC P-16 connectors, the P-system depth adjuster is set to 18mm, and the depth adjuster cap is attached to achieve a machining depth of 16mm.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621738696921,"sku":"251068","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/251068.jpg?v=1747160272"},{"product_id":"lamello-clamex-p-drill-jig-insert-with-p-16-element","title":"Lamello Clamex P Drill Jig Insert with P-16 Element","description":"\u003cp\u003eFor use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Drill Jig Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUse this accessory with the 6mm Clamex P Drill Jig to insert and anchor an \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello-lc-p-16-connectors-accessories\" target=\"_blank\" title=\"Lamello LC P-16 Connectors \u0026amp; Accessories\" rel=\"noopener\"\u003eLC P-16 Connector\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46621754982617,"sku":"255255","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/255255.jpg?v=1747161734"},{"product_id":"lamello-clamex-6mm-hole-cover-caps-90","title":"Lamello Clamex 6mm Hole Cover Caps 90°","description":"\u003cp\u003eCaps for covering the 6mm access hole made by Clamex Connectors. Available in a variety of colors to match different types of wood, finishes, etc.\u003c\/p\u003e\n\u003cp\u003eFor 90° joints. Each color includes 100 caps.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"White","offer_id":47491962011865,"sku":"335280","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":47491962044633,"sku":"335281","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":47491962077401,"sku":"335282","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Brown Beige","offer_id":47491962110169,"sku":"335283","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Brown","offer_id":47491962142937,"sku":"335284","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Grey-White","offer_id":47491962175705,"sku":"335285","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Light Grey","offer_id":47491962208473,"sku":"335286","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Window Grey","offer_id":47491962241241,"sku":"335287","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Blue Grey","offer_id":47491962274009,"sku":"335288","price":13.0,"currency_code":"USD","in_stock":true},{"title":"Dark Brown","offer_id":47491962306777,"sku":"335289","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/90degcovercapsmain.jpg?v=1762967220"},{"product_id":"lamello-clamex-installation-tool","title":"Lamello Clamex Flexible Installation Tool","description":"\u003cp\u003e4mm installation tool for all Lamello Clamex Connectors with cam locks. The flexible shaft makes it easy to access connectors in corners, tight spaces, and odd angles where the Allen key won't fit.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":47510709371097,"sku":"251993","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/251993.jpg?v=1763491873"},{"product_id":"lamello-6mm-positioning-clip-for-zeta-p2","title":"Lamello 6mm Positioning Clip for Zeta P2","description":"\u003cp\u003eAfter drilling the 6mm Clamex access hole with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\"\u003eClamex P Drill Jig\u003c\/a\u003e or a CNC, this clip attaches to the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Biscuit Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2\u003c\/a\u003e and allows it to make a precise P-System groove in reference to the access hole.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":47534508343513,"sku":"251067","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/251067.jpg?v=1769010618"},{"product_id":"lamello-bisco-p-10-p-system-connectors","title":"Lamello Bisco P-10 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic biscuit that fits the same groove as the Clamex P-10 Connectors — no need to change cutters\u003c\/li\u003e\n\u003cli\u003eUsed in combination with Clamex P-10 or Tenso P-10\u003c\/li\u003e\n\u003cli\u003eFor the flush alignment of panels, as well as for \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" title=\"All Glue \u0026amp; Adhesives\" rel=\"noopener\" target=\"_blank\"\u003egluing\u003c\/a\u003e, stiffening, and increasing shear strength\u003c\/li\u003e\n\u003cli\u003eAlso good for dry-fitting connections prior to final assembly with Clamex or Tenso\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBisco P-10 plastic biscuits are an alignment element designed to be used with \u003ca rel=\"noopener\" title=\"Lamello Clamex P-10 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" target=\"_blank\"\u003eClamex P-10 Connectors\u003c\/a\u003e. They ensure the flush alignment of panels, as well as increase connection strength. Bisco P Connectors are also good for dry-fitting connections prior to final assembly with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-10-p-system-connectors\" title=\"Lamello Tenso P-10 (with preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-10 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThanks to their surface structure, Bisco P-10 Connectors are self-clamping, meaning there is no gluing inside the groove required. The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters. Ideal for dry connections or when still deciding whether the parts will be glued or should be detachable.\u003c\/p\u003e\n\u003cp\u003eBisco P-10 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e. Starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eLooking for the larger connectors? \u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003ca rel=\"noopener\" style=\"color: rgb(112, 151, 62);\" title=\"Lamello Bisco P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-14-p-system-connectors\" target=\"_blank\"\u003e\u003cstrong\u003eSee Bisco P-14 \u0026gt;\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFits the same P-System groove as Clamex P-10, so no need to change cutters\u003c\/li\u003e\n\u003cli\u003eSelf-clamping in the groove due to its surface structure\u003c\/li\u003e\n\u003cli\u003eFixed connections possible in conjunction with PVA glue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003cli\u003eAlignment of grooves on separation walls, table tops, or kitchen worktops\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-10 for detachable surface, corner or miter joints ranging from 30° to 180°\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-10 or as a simple element for gluing workpieces\u003c\/li\u003e\n\u003cli\u003eStiffening or raising shear strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 7mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance longitudinal:\u003c\/strong\u003e ± 2mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/TQmQRB0eVjc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80","offer_id":47539889897689,"sku":"145304","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300","offer_id":47539889930457,"sku":"145305","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/BiscoP10main.jpg?v=1764186245"},{"product_id":"lamello-clamex-p-drill-jig-kit","title":"Lamello Clamex P Drill Jig Kit","description":"\u003cp\u003eLamello P-System Jig and Drill Bit for drilling the 6mm access hole for Clamex Connectors. This is the drill jig that comes with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\" title=\"All Lamello Joiners\" rel=\"noopener\"\u003eZeta P2 Joiner\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":47539998785753,"sku":"125344","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/125344.jpg?v=1764187989"},{"product_id":"lamello-divario-p-18-connector-basic-starter-set","title":"Lamello Divario P-18 Connector Basic Starter Set","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit includes (80) pairs of Divario P-18, the Divario Installation Tool, and a plastic marking jig.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelf-clamping, completely invisible joint for inserting shelves or partitions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAssemble by sliding in between two fixed sides or shelves using a guide groove\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo resistance while inserting until shortly before clamping force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick installation with no glue or clamps required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for wall and shelving units, wine racks, large furniture, etc.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDivario Connectors make it easy to retrofit shelves or partition walls into pre-assembled cabinets and casework. A groove is routed into the edge of the shelf, where the female connector is inserted. The shelf is then slid between two fixed sides until the female connector engages and clamps onto the male connector. Because clamping occurs only at specific points, rather than along the entire insertion length, installation is smoother and requires less force.\u003c\/p\u003e\n\u003cp\u003eNeither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation, or assembly. The connector can be fully or only partially fitted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eZeta P2 only\u003c\/em\u003e: Remove the front friction tabs by carefully popping them off with a utility knife.\u003c\/li\u003e\n\u003cli\u003eMark the center of the workpiece edge where the groove will be cut.\u003c\/li\u003e\n\u003cli\u003eInstall the stop square on the Zeta. Align the Zeta’s center mark with your layout mark and lock the stop square in place.\u003c\/li\u003e\n\u003cli\u003eSet the Zeta with the bottom depth knob at 0 and the top knob at OFF. Cut the edge using the stop square reference notches: start at the center notch and stop at the right-hand notch to prevent blowout.\u003c\/li\u003e\n\u003cli\u003eSet the top knob to 18 and the bottom knob to MAX. Reinstall the friction tabs. Align the stop square with the workpiece edge and cut the Divario groove at both ends of the edge.\u003c\/li\u003e\n\u003cli\u003eInsert the female connector into the groove using the installation tool. Seat it fully with a dead-blow hammer.\u003c\/li\u003e\n\u003cli\u003eOn the mating workpiece surface, mark the centerline. Use the marking jig to mark the two 8mm hole locations by aligning the center notch and tapping the jig to create drill divots.\u003c\/li\u003e\n\u003cli\u003eDrill the 8mm holes, insert the male connectors, and tap them flush with a hammer.\u003c\/li\u003e\n\u003cli\u003eSlide the shelf (female connectors) onto the mating piece (male connectors) until fully engaged. Tap gently with a hammer if needed. (See secondary images)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDivario P-18 Connectors are available in a few different versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-divario-p-18\" title=\"Lamello Divario P-18 Connectors page\" rel=\"noopener\" target=\"_blank\"\u003eIndividual Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-starter-kit-with-systainer\" title=\"Lamello Divario P-18 Starter Kit in Systainer product page\" rel=\"noopener\" target=\"_blank\"\u003eStarter Kit w\/Installation Tool, Metal Marking Jig, and Drill Bit w\/Stop Collar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Professiona product page\" rel=\"noopener\" target=\"_blank\"\u003eP-System Connector Assortment \u003c\/a\u003e(comes with many other types of P-System Connectors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely invisible joint for the highest quality standards\u003c\/li\u003e\n\u003cli\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/li\u003e\n\u003cli\u003eEfficient machining and installation with a CNC or a Zeta based on the P-System\u003c\/li\u003e\n\u003cli\u003eNarrow element for the use in shelves with a minimum thickness of 19mm\u003c\/li\u003e\n\u003cli\u003eNo resistance while inserting until shortly before building the clamping force\u003c\/li\u003e\n\u003cli\u003eInsertion of shelves after transport for lower transport weight\u003c\/li\u003e\n\u003cli\u003eConnectors insert by hand or install by hammer or mallet\u003c\/li\u003e\n\u003cli\u003eDrilling into the surface possible with a CNC machine without angle aggregates (e.g. nesting machines)\u003c\/li\u003e\n\u003cli\u003eMachining is possible in the factory or on site with a CNC or a Zeta P2\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength\u003c\/li\u003e\n\u003cli\u003eNo clamps necessary\u003c\/li\u003e\n\u003cli\u003eTransport the empty cabinet to save weight\u003c\/li\u003e\n\u003cli\u003eAssembly of the complete piece on site possible (flat pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 x 25 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLongitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~162 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~239 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~235 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) Divario P-18 Connectors\u003c\/li\u003e\n\u003cli\u003eDivario Installation Tool\u003c\/li\u003e\n\u003cli\u003ePlastic marking jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/6hakzHLkvjk?si=9d-himOYGltg--Dm\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":48503357014233,"sku":"145550S","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/145550S-1.jpg?v=1775672359"},{"product_id":"lamello-4mm-p-system-depth-adjuster-cap","title":"Lamello 4mm Tenso P-10 Depth Adjuster Cap","description":"\u003cp\u003eFor the Lamello Zeta P2 Joiner.\u003c\/p\u003e\n\u003cp\u003eThe 4mm P-System Depth Cap attaches to your Zeta's depth adjuster to make an 8mm groove in combination with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-10-p-system-connectors\" target=\"_blank\" title=\"Lamello Tenso P-10 (with preload clip) P-System Connectors product page\" rel=\"noopener\"\u003eTenso P-10 Connectors\u003c\/a\u003e. The non-standard 8mm groove allows for a wider variety of projects, such as dividing panel joints in material as thin as 16mm.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yHJD7u4aRd0?si=T1y2FCNk35mfacd8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":48578251423961,"sku":"145439","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/145439-1.jpg?v=1777405330"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/p-system-connectors-menu\/type_p-system-connectors.oembed?page=2","provider":"OakTree Supply","version":"1.0","type":"link"}