{"title":"OakTree's 2023 Gift Guide","description":"","products":[{"product_id":"kreg-rip-cut-circular-saw-edge-guide","title":"Kreg Rip-Cut Circular Saw Edge Guide","description":"\u003cp\u003eGreat projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide.\u003c\/p\u003e\n\u003cp\u003eThe Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut circular saw guide, you can cut with the confidence you want and the precision you need.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. All you have to do is lock the saw in at the measurement you want — up to 24\" — using the built-in measuring scale, and then make your cut.\u003c\/p\u003e\n\u003cp\u003eWith a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut circular saw guide is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24\") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMake rip cuts and crosscuts on plywood and sheet goods up to 24\" wide\u003c\/li\u003e\n\u003cli\u003eCut multiple pieces to the same size with just one setup\u003c\/li\u003e\n\u003cli\u003eAdjustable lens cursor for calibration\u003c\/li\u003e\n\u003cli\u003eUse the oversize circular saw guide for precise control throughout the cut\u003c\/li\u003e\n\u003cli\u003eEliminate need for marking, measuring, and layout lines\u003c\/li\u003e\n\u003cli\u003eTake your saw to the material instead of having to take your material to the saw\u003c\/li\u003e\n\u003cli\u003eUniversal Sled accepts most circular saws — left or right blade\u003c\/li\u003e\n\u003cli\u003eReversible edge guide for left- or right-handed use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Universal Saw Sled\u003c\/li\u003e\n\u003cli\u003e(1) Aluminum Guide Rail\u003c\/li\u003e\n\u003cli\u003e(1) Precision Edge Guide\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FpCbU-zXFjM\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323240,"sku":"KMA2685","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMA2685-1.jpg?v=1671121377"},{"product_id":"kreg-90-right-angle-clamp","title":"Kreg 90° Right Angle Clamp","description":"\u003cp\u003eThe Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx auto-adjust technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1\/2\" plywood to thick 2x4 boards.\u003c\/p\u003e\n\u003cp\u003eThe steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.\u003c\/p\u003e\n\u003cp\u003eThe arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting. Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done. \u003c\/p\u003e\n\u003cp\u003eMany woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds pocket-hole joints at 90° during project assembly\u003c\/li\u003e\n\u003cli\u003eAutomaxx technology adjusts automatically to material thickness\u003c\/li\u003e\n\u003cli\u003eContoured grips for added comfort\u003c\/li\u003e\n\u003cli\u003ePin fits securely into pocket hole\u003c\/li\u003e\n\u003cli\u003eSwivel pad holds mating piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 3-1\/8\" (79 mm)\u003cbr\u003e\u003cstrong\u003eReach:\u003c\/strong\u003e 5\" (127 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with padded grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UkUGZSIHJQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323668,"sku":"KHCRA","price":46.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHCRA-1.jpg?v=1671132704"},{"product_id":"titebond-original-wood-glue","title":"Titebond Original Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sand-ability and is unaffected by finishes. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 50° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 4-6 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040827208,"sku":"5062","price":2.99,"currency_code":"USD","in_stock":true},{"title":"8 oz","offer_id":21919615549558,"sku":"5063","price":3.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21919615516790,"sku":"5064","price":5.99,"currency_code":"USD","in_stock":true},{"title":"32 oz","offer_id":21919615484022,"sku":"5065","price":7.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21919615451254,"sku":"5066","price":21.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767397081,"sku":"50609","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/originalmainimage.jpg?v=1750082510"},{"product_id":"titebond-ii-premium-wood-glue","title":"Titebond II Premium Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sand-ability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 55° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 3-5 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040831920,"sku":"5002","price":3.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21970287624310,"sku":"5003","price":5.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21970287591542,"sku":"5004","price":7.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21970287558774,"sku":"5005","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21970287526006,"sku":"5006","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642768052441,"sku":"50009","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIPremiummain.jpg?v=1750083305"},{"product_id":"titebond-iii-ultimate-wood-glue","title":"Titebond III Ultimate Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI\/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4oz","offer_id":46642769166553,"sku":"1412","price":4.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21895268499574,"sku":"1413","price":6.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":1040840364,"sku":"1414","price":9.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21895268466806,"sku":"1415","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21895268434038,"sku":"1416","price":38.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767986905,"sku":"14109","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIIUltimatemain.jpg?v=1750085018"},{"product_id":"titebond-ii-extend-wood-glue","title":"Titebond II Extend Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sand-ability and is unaffected by finishes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 16 oz. or 1 gallon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePasses Type II Water-Resistance testing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHot press and R-F compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSlower speed of set - longer open time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent-resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent sand-ability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"16oz","offer_id":21970287100022,"sku":"4134","price":8.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":1040841872,"sku":"4136","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Titebond-II-Extend.jpg?v=1652472193"},{"product_id":"wolverine-skew-grinding-attachment","title":"Oneway Wolverine Skew Grinding Attachment","description":"\u003cp\u003eDesigned for use with the \u003ca title=\"Oneway Wolverine Grinding Jig product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOne reason that the skew leaves such an incredible finish on work pieces is its very thin edge which leaves naturally cleaner cuts. This creates a problem sharpening the skew as this thin edge will easily fold over during grinding. Oneway’s Skew Grinding Attachment minimizes this problem by allowing the skew to be mechanically held. The unique offset handle position actually reduces the hollow grind generated and leaves a stronger more predictable tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the handle of the skew is placed in the pocket, the cutting edge becomes square to the sharpening wheel, helping the bevel to flatten itself out.\u003c\/li\u003e\n\u003cli\u003eUnique offset handle position helps to create a stronger and more predictable tool.\u003c\/li\u003e\n\u003cli\u003eDurable metal construction.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117311184,"sku":"2690","price":34.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2690-1.jpg?v=1673033692"},{"product_id":"wolverine-original-vari-grind","title":"Oneway Wolverine Original Vari-Grind","description":"\u003cp\u003eDesigned for use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" title=\"Oneway Wolverine Grinding Jig product page\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWith the Wolverine Original Vari-Grind, you can accurately produce and maintain traditional and long grinds on all bowl and spindle gouges from very small to 3\/4\" diameter.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCreate a side grind on your bowl gouges\u003c\/li\u003e\n\u003cli\u003eCreate a fingernail grind on your spindle gouges\u003c\/li\u003e\n\u003cli\u003eBlack coating to prevent rusting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lb.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11.6\" x 5\" x 1.8\"\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVari-Grind Attachment\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117314516,"sku":"2480","price":60.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2480-1.jpg?v=1674849828"},{"product_id":"wolverine-grinding-jig","title":"Oneway Wolverine Grinding Jig","description":"\u003cp\u003eThe Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. The Wolverine System was designed to turn a low cost grinder into the ultimate tool for sharpening tools. It fits most 6”, 7”, 8”, and 10” grinders with little or no modification (please specify if to be used with a 10” grinder).\u003c\/p\u003e\n\u003cp\u003eOwning the Wolverine Grinding Jig will ultimately save you time, frustration, and money. You can now grind your tools properly the first time. Uniform cutting edges and single facet bevels will give you safer, more predictable tools. Because you are grinding your tools less, both your wheels and tools will last longer.\u003c\/p\u003e\n\u003cp\u003eThe Wolverine comes with two aluminum anodized bases, one for each side of the grinder. By mounting one under each wheel, grinding operations can rapidly be performed on either side of your grinder without having to reposition bases. Because bases mount directly under grinding wheels they are completely out of the way for occasional freehand grinding.\u003c\/p\u003e\n\u003cp\u003eBases are equipped with cam clamping that makes removing and installing attachments possible in seconds. The cam forces all attachments rigidly into the base which eliminates all play. This system is especially important as it allows the platform to be moved from the right to the left side of the grinder without disturbing the angle and maintaining a safe minimum clearance from the grinding wheel. This clearance should always be set from 1\/16” to 1\/8” from the wheel.\u003c\/p\u003e\n\u003cp\u003eThis Grinding Jig also comes equipped with an adjustable angle sturdy platform that has a 3” x 5” working area. It is made from 1\/4” thick steel and is machined square after welding. The result is a platform that is both incredibly sturdy and square. This platform can be used on both the left and right hand sides of the grinder. An adjustable speed handle makes adjustments quick and easy and ensures that the handle is never in the way.\u003cbr\u003e\u003cbr\u003eThe V-Arm slides in the base and holds your bevel angle constant. The handle of the tool is set into the Vee-Pocket and the tool’s bevel angle can be set while the grinder is off. It then becomes a simple process of fine adjustments to get the exact same grind every time. The V-Arm is long enough to hold any standard tool. Adjusting the arm is as easy as unlocking the clamping lever, moving the arm in or out and re-clamping the lever.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grinding Jig can be easily used to sharpen the following tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGouges\u003c\/li\u003e\n\u003cli\u003eChisels\u003c\/li\u003e\n\u003cli\u003eScrapers\u003c\/li\u003e\n\u003cli\u003eParting tools\u003c\/li\u003e\n\u003cli\u003eSkews\u003c\/li\u003e\n\u003cli\u003eCarving tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wolverine System was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Properly installed, with balanced wheels, this system will outperform grinders costing hundreds of dollars more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e Use with the \u003ca title=\"Oneway Wolverine Vari-Grind product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-original-vari-grind\" target=\"_blank\"\u003eVari-Grind\u003c\/a\u003e or \u003ca title=\"Oneway Vari-Grind 2 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/vari-grind-2-jig\" target=\"_blank\"\u003eVari-Grind 2\u003c\/a\u003e for improved grinding of side grinds and fingernail shapes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo Base System allows rapid grinding operations on either side of your grinder without having to re-position bases\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\" x 5\" adjustable platform can be used on both the left and right hand sides of the grinder\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable speed handle makes adjustments quick and easy and ensures that the handle is never in the way\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.3 lbs.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 30.75 x 9 x 3.25\"\u003cbr\u003e\u003cstrong\u003eInstallation Method:\u003c\/strong\u003e Surface-Mounted\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(2) Steel Bases with Easy Locking Handles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSteel Platform\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eV-Arm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAdjustable Steel Sharpening Platform\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWolverine Sharpening System DVD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFull Assembly Setup Instructions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117316240,"sku":"2291","price":101.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2291-1.jpg?v=1674849283"},{"product_id":"kreg-automaxx-face-clamp","title":"Kreg AUTOMAXX Face Clamp 3\"","description":"\u003cp\u003eWood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. These versatile wood clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2 x 4 and then a piece of 1\/2\" plywood without ever readjusting the wood clamp.\u003c\/p\u003e\n\u003cp\u003eEasily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the wood clamp maintains consistent clamping pressure with every thickness. \u003c\/p\u003e\n\u003cp\u003eWood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.\u003c\/p\u003e\n\u003cp\u003eAlso available as a \u003ca title='Kreg AUTOMAXX Face Clamp 6\" product page' href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-automaxx-face-clamp-6\" target=\"_blank\"\u003e6\" Clamp\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjusts automatically to match material thickness\u003c\/li\u003e\n\u003cli\u003eEasy-to-regulate pressure with a simple thumbscrew\u003c\/li\u003e\n\u003cli\u003eLarge clamp faces spread pressure evenly\u003c\/li\u003e\n\u003cli\u003eErgonomic padded grips prevent hand fatigue\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca title=\"Kreg Jig R3 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-jig-r3\" target=\"_blank\"\u003eKreg Pocket-Hole Jig R3\u003c\/a\u003e Clamp Pad Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 3\" (76 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with Molded Grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5WtWvQKBqXA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":21870291517558,"sku":"KHC3","price":36.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHC3-1.jpg?v=1675887664"},{"product_id":"wolverine-dressing-jig","title":"Oneway Wolverine Dressing Jig","description":"\u003cp\u003eThe Oneway Wolverine Dressing Jig provides the Turner with a simple and exact tool for the precision dressing and truing of grinding wheels.\u003c\/p\u003e\n\u003cp\u003eOneway's Dressing system is the only dresser on the market that allows controlled removal of this minute amount of material. Because the Dressing Jig removes such small amounts, your grinding wheels will last much longer.\u003c\/p\u003e\n\u003cp\u003eAfter dressing with the Dressing Jig, your wheels will be round, clean, and sharp. They will cut faster, cooler and finer. You will get a better finish on tools than anything you have ever experienced. Your tools will have sharper edges, smoother bevels, and all this will be done with less burning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful Tip: \u003c\/strong\u003eFor optimal performance, the diamond should be turned in its holder at regular intervals - a good target is to turn it after 10 or more.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4 carat non-re-settable diamond\u003c\/li\u003e\n\u003cli\u003eSupport Arm\u003c\/li\u003e\n\u003cli\u003eSturdy Diamond Holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1154070368,"sku":"2292","price":75.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2292-1.jpg?v=1674850674"},{"product_id":"vari-grind-2-jig","title":"Oneway Vari-Grind 2 Jig","description":"\u003cp\u003eThe Vari-Grind 2 Jig features all of the benefits of the original Vari-Grind, but increases ease of use and safety. The Vari-Grind 2 Jig restrains both the side-to-side motion of the tool, as well as the pivot point so that the tool cannot slip in either direction.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis cutting-edge woodturning tool uses pivot point location, allowing it to move in a true cylindrical motion. This allows the user to create perfect fingernail and side grinds, no matter what angle the jig is at. This sharpening tool makes getting a perfect edge on gouges and other tools much easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eBase not included. This product is ideal for those who already own the \u003ca title=\"Oneway Wolverine Grinding Jig product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImproved safety and ease of use\u003c\/li\u003e\n\u003cli\u003eSharpens tools up to 3\/4\" diameter\u003c\/li\u003e\n\u003cli\u003eHolds tools up to 5\/8\" diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3 lbs.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.31 x 10.5 x 9.2\"\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOpti-Grind Attachment\u003c\/li\u003e\n\u003cli\u003eRestraining Arm\u003c\/li\u003e\n\u003cli\u003eDVD Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WYiadjRqdfA\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1154070384,"sku":"3900","price":86.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/3900-1.jpg?v=1674850113"},{"product_id":"grr-rip-block","title":"MicroJig GRR-RIP Block Smart Pushblock","description":"\u003cp\u003eTransform your woodworking experiences with the GRR-RIP Smart Pushblock, a revolutionary tool that delivers unparalleled control, safety, and precision. This exceptional block has earned the title of #1 Best-Overall Pushblock by Popular Mechanics, reflecting the expert validation and trust placed in its performance and design.\u003c\/p\u003e\n\u003cp\u003eThe GRR-RIP BLOCK Smart Pushblock boasts auto-retracting heel technology that hooks the tail-end of your board, ensuring smooth and consistent movement throughout the cutting process. The proprietary Green GRR-RIP provides extreme hold, allowing you to tackle various materials with confidence and ease.\u003c\/p\u003e\n\u003cp\u003eThis pushblock is designed for versatility, featuring a 90° flip guide that allows for vertical footing on band saws and router tables. No matter the complexity of your project, the GRR-RIP Pushblock adapts to your needs, delivering outstanding results every time.\u003c\/p\u003e\n\u003cp\u003eThe ergonomic handle of this pushblock is specifically designed to exert directional pressure against the fence, providing stability and control during operation. No more hand strain or fatigue!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-retracting heel technology and proprietary Green GRR-RIP ensure a smooth cutting process\u003c\/li\u003e\n\u003cli\u003e90° flip guide for vertical footing on band saws and router tables, and an ergonomic handle for superior stability and control\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":1158628840,"sku":"GB-1","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/GB-1-1.jpg?v=1680785311"},{"product_id":"jet-floor-drill-press-jdp-17","title":"JET JDP-17 17\" Floor Drill Press","description":"\u003cp\u003eFrom a full 5\" of spindle travel to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. The JET 17\" Floor Drill Press also features a long-lasting, built-in LED work light to provide direct lighting while reducing shadows. A large 14\" x 19\" work table provides plenty of support with an edge designed for easy clamping.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated depth stop makes repetitive drilling quick and easy\u003c\/li\u003e\n\u003cli\u003eLarge cast iron base provides stability\u003c\/li\u003e\n\u003cli\u003eOne-handed belt tensioning allows for rapid speed changes\u003c\/li\u003e\n\u003cli\u003ePower switch features a safety key and large, paddle-style off button\u003c\/li\u003e\n\u003cli\u003ePowered by an efficient 3\/4HP, 1Ph, 115V TEFC motor and poly-v belt drive system\u003c\/li\u003e\n\u003cli\u003eReplaceable MDF table insert\u003c\/li\u003e\n\u003cli\u003eTable edge lip designed to make clamping easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled Machine Dimensions (L x W x H):\u003c\/strong\u003e 28-1\/2\" x 19\" x 65\"\u003cbr\u003e\u003cstrong\u003eChuck Distance to Base:\u003c\/strong\u003e 42-7\/8\"\u003cbr\u003e\u003cstrong\u003eChuck Distance to Table:\u003c\/strong\u003e 25-7\/8\"\u003cbr\u003e\u003cstrong\u003eChuck Size:\u003c\/strong\u003e 5\/8\"\u003cbr\u003e\u003cstrong\u003eColumn Diameter:\u003c\/strong\u003e 3-5\/32\"\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3\/4hp\u003cbr\u003e\u003cstrong\u003eNumber of Spindle Speeds:\u003c\/strong\u003e 16\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size (Amps.):\u003c\/strong\u003e 15\u003cbr\u003e\u003cstrong\u003eSpindle Distance to Base:\u003c\/strong\u003e 46-1\/2\"\u003cbr\u003e\u003cstrong\u003eSpindle Distance to Table (Max.):\u003c\/strong\u003e 30\"\u003cbr\u003e\u003cstrong\u003eSpindle Travel:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Floor standing Model\u003cbr\u003e\u003cstrong\u003eSwing:\u003c\/strong\u003e 16-7\/8\"\u003cbr\u003e\u003cstrong\u003eTable Size (LxW):\u003c\/strong\u003e 14\" x 19\"\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 187 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cdiv\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-o3g940oc2I?start=15\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":1201043480,"sku":"JT9-716300","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/716300-1_90f4c0a9-6747-486a-afc8-15b0a0b79f72.jpg?v=1748882651"},{"product_id":"easy-wood-tools-ci4-nr-negative-rake-carbide-cutter-diamond","title":"Easy Wood Tools Ci4 NR Negative Rake Carbide Cutter - Diamond","description":"\u003cp\u003eThe Ci4 Diamond Negative Rake Replacement Carbide Cutter is made especially for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Easy Start Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-easy-start-detailer\" target=\"_blank\"\u003eEasy Start Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Mini Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-mini-easy-detailer\" target=\"_blank\"\u003eMini Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-mid-size-easy-detailer\" title=\"Easy Wood Tools Mid-Size Easy Detailer product page\" target=\"_blank\"\u003eMid-Size Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Full-Size Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-full-size-easy-detailer\" target=\"_blank\"\u003eFull-Size Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Pro Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-pro-easy-detailer\" target=\"_blank\"\u003ePro Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNegative Rake Carbide Cutters from Easy Wood Tools allow you to cut resin and acrylic with confidence. Traditional steel cutters can be tricky on man-made materials because they tend to grab and catch. EWT designed their negative rake cutters to solve that problem.\u003c\/p\u003e\n\u003cp\u003eRake refers to the angle of the tool in relation to the cutting surface. While most turning tools use a neutral (zero) rake, a negative rake slopes the face of the tool away from the cutting edge. This geometry produces a smoother, less aggressive cut, making the tool easier to control and safer to use, especially on engineered materials.\u003c\/p\u003e\n\u003cp\u003eThere is no sharpening necessary with EWT Carbide Cutters. When one side of the cutter gets dull, simply turn it to a new side. When all sides are used, then you can replace the cutter. You'll devote more time to turning instead of spending time sharpening your tools, and you'll save money in the long run, too.\u003c\/p\u003e\n\u003cp\u003eDiamond cutters are designed to create small coves, beads, and other fine details. This cutter fits all tools marked with Ci4. Be sure to double check for the correct size - it is engraved on your tool's shank!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Not \u003c\/strong\u003ecompatible with the Micro Easy Detailer and Mid-Size Micro Easy Detailer (these two use the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci7-nr-negative-rake-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci7 NR Negative Rake Carbide Cutter - Diamond product page\" target=\"_blank\"\u003eCi7 NR in Negative Rake Carbide Cutter\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Easy Wood Tools Carbide Cutter Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Easy_Wood_Tools_Carbide_Cutter_Guide.pdf?v=1769616487\" target=\"_blank\"\u003eEasy Wood Tools Carbide Cutter Guide \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNegative rake angle for smooth, safe cuts on resin and acrylic\u003c\/li\u003e\n\u003cli\u003eOptimum grade of carbide for the longest lasting sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eProprietary grinding process that results in the sharpest edge possible\u003c\/li\u003e\n\u003cli\u003ePrecision ground finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ZCMscJ7yVHc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":39407811166407,"sku":"7400NR","price":26.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/7400NR-1.jpg?v=1668455831"},{"product_id":"easy-start-carbide-turning-tools","title":"Easy Wood Tools Easy Start Rougher","description":"\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" target=\"_blank\"\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptional carbide cutters sold separately: \u003ca title=\"Easy Wood Tools Ci2-R2 Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" target=\"_blank\"\u003eStandard Carbide Cutter Ci2-R2 (radius)\u003c\/a\u003e and the \u003ca title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTurn your Easy Rougher into a beading tool with the newest \u003ca title=\"Easy Wood Tools NR Beading Cutters product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12.5\"\u003cbr\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 9\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 2\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2WoQWRhIpLQ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448032,"sku":"9520","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/9520.jpg?v=1634669251"},{"product_id":"mini-easy-carbide-turning-tools","title":"Easy Wood Tools Mini Easy Rougher","description":"\u003cp\u003e\u003cspan\u003eMini Tools feature all the same benefits of their mid-sized parents, just in a smaller size for projects like goblets, wine stoppers, knife handles, and bowls.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2 Carbide product page\" target=\"_blank\"\u003eCi2-R2 (radius)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTurn your Easy Rougher into a beading tool with the newest \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" title=\"Easy Wood Tools NR Beading Cutters product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\" square x 4\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 16\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 2\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHex\u003cspan\u003e key\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v0CmXBeEGjg\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448176,"sku":"5200","price":104.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Untitled-1-Recovered-Recovered.jpg?v=1668534964"},{"product_id":"mid-size-carbide-turning-tools","title":"Easy Wood Tools Mid-Size Easy Rougher","description":"\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor. Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" target=\"_blank\"\u003eStandard Cutter Ci2-SQ (square)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2 Carbide Cutter product page\" target=\"_blank\"\u003eStandard Carbide Cutter Ci2-R2 (radius)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTurn your Easy Rougher into a beading tool with the newest \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" title=\"Easy Wood Tools NR Beading Cutters product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 14\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\" square x 7\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 21\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 3\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/wj8NtvulI8M\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448208,"sku":"2200","price":139.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2200.jpg?v=1634669759"},{"product_id":"full-size-carbide-turning-tools","title":"Easy Wood Tools Full-Size Easy Rougher","description":"\u003cp\u003eFull-Size Easy Wood Tools are perfect for when you're working on spindles, table legs, large bowls, and other big projects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90 degrees to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r4-carbide-cutter-4-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R4 Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard Carbide Cutter Ci1-R4 (4\" Radius)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-sq-carbide-cutter-square\" target=\"_blank\" title=\"Easy Wood Tools Ci1-SQ Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eStandard Carbide Cutters Ci1-SQ (square)\u003c\/a\u003e, \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r2-carbide-cutter-2-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R2 Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eCi1-R2 (2\" radius)\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r2-nr-negative-rake-carbide-cutter-2-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R2-NR Negative Rake Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eNegative Rake Carbide Cutter Ci1-R2-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 16\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 1\/2\" square x 8.5\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 24.5\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci1-R4 (4\" Radius)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448240,"sku":"1200","price":151.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1200.jpg?v=1634667085"},{"product_id":"easy-wood-tools-pro-easy-detailer","title":"Easy Wood Tools Pro Easy Detailer","description":"\u003cp\u003e\u003cspan\u003eThe Easy Pro Detailer uses a diamond shaped cutter that is great for putting in accent lines or getting into areas where the other tools won't fit. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci4-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci4 Carbide Cutter product page\" target=\"_blank\"\u003eStandard Carbide Cutter Ci4 (diamond)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutter sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci4-nr-negative-rake-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci4 NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci4-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAmerican Hickory Handle:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 1\/2\" square x 8.5\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 28.5\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci4 (diamond)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":21869651361910,"sku":"3700","price":146.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/3700.jpg?v=1634667247"},{"product_id":"1-8-carbide-easy-parting-tool","title":"Easy Wood Tools 1\/8\" Carbide Easy Parting Tool","description":"\u003cp\u003eThe easiest, safest, most versatile parting tool you will ever user.  With perfect geometries built right into the replaceable cutter, you never need to worry with all the fuss of sharpening.\u003c\/p\u003e\n\u003cp\u003eComes equipped with replaceable Negative Rake Carbide Cutter Blade, and includes 5\/32\" standard hex key for quickly changing cutter blade.\u003c\/p\u003e\n\u003cp\u003eNegative Rake Replacement Blade: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-negative-rake-parting-tool-replacement-blade-fits-pt150-parting-tool-only?variant=39876734877895\" target=\"_blank\"\u003ePi160\u003c\/a\u003e*\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 19\"\u003cbr\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 14\"\u003cbr\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCut Width:\u003c\/strong\u003e 1\/8\" \u003cbr\u003e\u003cstrong\u003eMax Part-off Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e The Pi160 replacement NR Cutter Blade fits only the 2nd Generation 1\/8\" Parting Tool. The \u003ca title=\"Easy Wood Tools Pi1 Parting Tool Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-pi1-parting-tool-carbide-cutter\" target=\"_blank\"\u003ePi1 replacement Standard Carbide Cutter\u003c\/a\u003e fits only the Original 1\/8\" Parting Tool.\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448420,"sku":"PT150","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/PT150.jpg?v=1634666400"},{"product_id":"mid-size-easy-hollower-carbide-turning-tools","title":"Easy Wood Tools Mid-Size Easy Hollower #1","description":"\u003cp\u003eThe Mid-Size Easy Hollower #1 is straight and thin enabling you to get into small openings to start the hollowing process. It is designed to clean out and finish the majority of the inside of a bowl or hollow form. \u003cspan data-mce-fragment=\"1\"\u003eWhen the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci5-carbide-cutter-round\" title=\"Easy Wood Tools Ci5 Carbide Cutter product page\" target=\"_blank\"\u003e\u003cspan\u003eStandard Carbide Cutter Ci5 (round)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptional carbide cutter sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci5-nr-negative-rake-carbide-cutter-round\" title=\"Easy Wood Tools Ci5-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci5-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e\u003cspan\u003e 21-1\/2\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e\u003cspan\u003e 14\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e\u003cspan\u003e 1\/2\" square x 8-1\/2\" long\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci5 (round)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/bNqfNJ8Yhxo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448464,"sku":"6601","price":150.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/6601.jpg?v=1634670043"},{"product_id":"easy-tool-level","title":"Easy Wood Tools Easy Level","description":"\u003cp\u003eKeep your Easy Turning Tools level and flat with the Easy Level™! It's a small removable guide that helps you make sure your Easy Wood Tools® are in the best position for great cuts. Simply attach with two sided tape or a rubber band.\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448680,"sku":"8202","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/8202-1.jpg?v=1681928340"},{"product_id":"honing-compound-1","title":"Veritas Honing Compound","description":"\u003cp\u003eThis honing compound is a blend of both chromium and aluminum oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.\u003c\/p\u003e\n\u003cp\u003eCuts quickly but leaves a mirror finish with a light wax film. The average size of scratch pattern it leaves behind is 0.5 microns or 0.00002 inches.\u003c\/p\u003e\n\u003cp\u003eIdeal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Used with a felt wheel or leather belt for power honing or with a leather strop for hand honing.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlend of chromium and aluminum oxide to give best combination of cutting speed and fine finish\u003c\/li\u003e\n\u003cli\u003eBonding formulated for ease of charging\u003c\/li\u003e\n\u003cli\u003eLeaves behind average size scratch pattern of 0.5 microns or .00002\"\u003c\/li\u003e\n\u003cli\u003eCan be used for final honing of almost any tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 6 oz\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21338331971702,"sku":"05M0801","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M0801-1_77d5bdb6-4798-4ee8-a348-5166877604e5.jpg?v=1680640641"},{"product_id":"imperial-std-marking-gauge-1","title":"Veritas Standard Wheel Marking Gauge","description":"\u003cp\u003eThere are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter, and the pin tends to follow the wood grain, throwing off your line. The Veritas wheel marking gauges solve both problems.\u003c\/p\u003e\n\u003cp\u003eThe hardened steel wheel cutter scribes perfectly at any point of its circumference. Since it cuts wood fibers rather than tears, it marks cleanly, even on cross grain. The wheel's single-sided bevel provides accuracy by pulling the gauge face against the stock. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortise depth.\u003c\/p\u003e\n\u003cp\u003eThe wheel retracts into the face of the gauge for storage and protection. The gauges are very easy to set thanks to the internal O-ring to keep light but constant friction on the rod.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel wheel with single-sided bevel pulls gauge face against stock, maintaining accuracy\u003c\/li\u003e\n\u003cli\u003eCuts wood fibers - does not tear\u003c\/li\u003e\n\u003cli\u003eMarks cleanly, even on cross grain\u003c\/li\u003e\n\u003cli\u003eThe wheel retracts into the face of the gauge for storage and protection\u003c\/li\u003e\n\u003cli\u003eThe gauges are very easy to set\u003c\/li\u003e\n\u003cli\u003eUse as a depth gauge to transfer measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a replacement wheel? Find it \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/replacement-wheel-for-std-marking-gauge-1\" target=\"_blank\" title=\"Veritas® Replacement Wheel for Std. Marking Gauge product page\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21337625231478,"sku":"05N3321","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05N3321-1.jpg?v=1670017770"},{"product_id":"narex-premium-bench-chisels","title":"Narex Premium Bench Chisels","description":"\u003cp\u003eInnovated chisel with improved cross-section of the blade that minimizes friction when cutting into wood. Improved grinding of the edges creates especially thin sides which are needed in dovetailing.\u003c\/p\u003e\n\u003cp\u003eErgonomic handle from hard and hefty hornbeam wood is strong enough to withstand heavy mallet blows. Combination of the stained hornbeam handle, brass ferrule and improved grinding of the blade creates a unique design of the tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged from highly alloyed Cr-Mn steel\u003c\/li\u003e\n\u003cli\u003eHeat treated up to 59 HRc\u003c\/li\u003e\n\u003cli\u003eFully ground and sharpened\u003c\/li\u003e\n\u003cli\u003eThin sides for sidewall clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic with round cross-section\u003c\/li\u003e\n\u003cli\u003eStained hornbeam wood\u003c\/li\u003e\n\u003cli\u003eBrass ferrule\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Narex","offers":[{"title":"16mm","offer_id":21874597298294,"sku":"811616","price":22.99,"currency_code":"USD","in_stock":false},{"title":"26mm","offer_id":21874597265526,"sku":"811626","price":24.99,"currency_code":"USD","in_stock":true},{"title":"40mm","offer_id":21874597232758,"sku":"811640","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Premium_Bench_Chisel_16mm.jpg?v=1649186355"},{"product_id":"kreg-precision-miter-gauge-system","title":"Kreg Precision Miter Gauge System","description":"\u003cp\u003eOne Miter Gauge with everything you need for accuracy.\u003c\/p\u003e\n\u003cp\u003eWhy spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? The Kreg Precision Miter Gauge System requires no calibrating, and it features positive stops at 0°, 10°, 22-1\/2°, 30°, and 45° to make it easy to cut accurate miters quickly.\u003c\/p\u003e\n\u003cp\u003eWhen you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1\/10th of a degree. Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.\u003c\/p\u003e\n\u003cp\u003eFits standard 3\/8\" (9.5mm) x 3\/4\" (19mm) miter slots\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFactory-calibrated; perfect right out of the box\u003c\/li\u003e\n\u003cli\u003ePositive stops at 0°, 10°, 22-1\/2°, 30°, and 45° \u003c\/li\u003e\n\u003cli\u003eBrass pin allows quick changes between positive stop angles\u003c\/li\u003e\n\u003cli\u003e24\" bar with 5 bar adjusters eliminates \"play\" between the bar and miter slot\u003c\/li\u003e\n\u003cli\u003e24\" Fence with Swing Stop and Self-Adhesive Measuring Tape\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Miter Gauge\u003c\/li\u003e\n\u003cli\u003e(1) 24\" (610mm) Fence with scale\u003c\/li\u003e\n\u003cli\u003e(1) Swing Stop with Precision Lens Cursor\u003c\/li\u003e\n\u003cli\u003e(1) Self-adhesive measuring tape\u003c\/li\u003e\n\u003cli\u003eOwner's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1327665812,"sku":"KMS7102","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMS7102-1.jpg?v=1668549186"},{"product_id":"kreg-precision-track-and-stop-kit","title":"Kreg Precision Trak \u0026 Stop Kit*","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Final sale.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you'd like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!\u003c\/p\u003e\n\u003cp\u003eThe most common setup for the Precision Trak \u0026amp; Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak \u0026amp; Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method.\u003c\/p\u003e\n\u003cp\u003eDesigned to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.\u003c\/p\u003e\n\u003cp\u003eThe Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.\u003c\/p\u003e\n\u003cp\u003eBuild a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 21\/4\" (57 mm) above the saw table for the stops to glide upon. Instructions and mounting hardware for the Trak are included.\u003c\/p\u003e\n\u003cp\u003eIncredibly strong and built-to-last, our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3\/4\" (19mm) thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2' (610 mm) long sections, giving you setup options: 4' (1219 mm) on each side of the saw, 2' (610 mm) on one side and 6’ (1829 mm) on the other, or all 8' (2438 mm) on one side.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTurn your miter saw into a precise cutting system\u003c\/li\u003e\n\u003cli\u003eAdjustable stops position your workpiece for repeatable, reliable results\u003c\/li\u003e\n\u003cli\u003ePrecision Lens Cursor for fast, accurate positioning\u003c\/li\u003e\n\u003cli\u003eProduction Stop and Swing Stop provide great results\u003c\/li\u003e\n\u003cli\u003eL-shaped base design makes alignment and mounting easy\u003c\/li\u003e\n\u003cli\u003eIncludes 8' of Trak in 2'-long sections that can be used on the right or left side of the saw, or split between both sides\u003c\/li\u003e\n\u003cli\u003e(2) self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Anodized aluminum\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Cuts up to 8' long\u003cbr\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Top Trak, Swing Stop, Production Stop, Self-adhesive measuring tapes\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e (4) 2'sections for 8' of Trak length\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(4) 2' (610mm) pieces of Top Trak\u003cbr\u003e(1) Swing Stop\u003cbr\u003e(1) Production Stop\u003cbr\u003e(1) 12' (3657 mm) L-to-R reading self-adhesive tape\u003cbr\u003e(1) 12' (3657 mm) R-to-L reading self-adhesive tape\u003cbr\u003e(1) Owner's Manual\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1327669864,"sku":"KMS8000","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMS8000-1.jpg?v=1613670483"},{"product_id":"inside-caliper-100mm","title":"Inside Caliper 100mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322693,"sku":"850-1100","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1100.jpg?v=1649262144"},{"product_id":"inside-caliper-200mm","title":"Inside Caliper 200mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322757,"sku":"850-1120","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1120.jpg?v=1649262159"},{"product_id":"jwl-1015vs-10-x-15-variable-speed-wood-lathe","title":"JET JWL-1015VS 10'' x 15'' Variable Speed Wood Lathe","description":"\u003cp\u003eThe JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15\" mini lathe has the power, precision and versatility to turn out any number of projects.\u003c\/p\u003e\n\u003cp\u003eAdd the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-jwl-1015-lathe-bed-extension\" title=\"JET JWL-1015 Lathe Bed Extension product page\" rel=\"noopener\" target=\"_blank\"\u003ebed extension\u003c\/a\u003e for larger projects, as well as the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-jwl-1015-lathe-stand\" title=\"JET JWL-1015 Lathe Stand product page\" rel=\"noopener\" target=\"_blank\"\u003estand\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-lathe-stand-extension-for-jet-jwl-1015-1015vs-lathes\" title=\"JET Lathe Stand Extension for JWL-1015\/1015VS Lathes product page\" rel=\"noopener\" target=\"_blank\"\u003estand extension\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImproved tensioning system with easier access to belts\u003c\/li\u003e\n\u003cli\u003eIntegrated 24 position indexing\u003c\/li\u003e\n\u003cli\u003eLive center in the tailstock\u003c\/li\u003e\n\u003cli\u003eThree speed ranges: 200-1,050 \/ 300-1,750 \/ 600-3,600\u003c\/li\u003e\n\u003cli\u003eWider bed ways provide increased rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBed construction:\u003c\/strong\u003e Cast Iron\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 1\/2hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 115V\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 73 lbs.\u003cbr\u003e\u003cstrong\u003eNumber of indexing positions:\u003c\/strong\u003e 24\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 115V\u003cbr\u003e\u003cstrong\u003eQuill travel:\u003c\/strong\u003e 2\"\u003cbr\u003e\u003cstrong\u003eRecommended circuit size (Amps.):\u003c\/strong\u003e 10\u003cbr\u003e\u003cstrong\u003eSpindle bore:\u003c\/strong\u003e 3\/8\"\u003cbr\u003e\u003cstrong\u003eSwing over bed:\u003c\/strong\u003e 10\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":3374218437,"sku":"JT9-719110","price":714.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/719110-1.jpg?v=1748882647"},{"product_id":"kreg-precision-router-table-old","title":"Kreg Precision Router Table","description":"\u003cp\u003eThe Kreg Precision Router Table System combines unmatched versatility with incredible adjustability and ease of setup. This powerful system offers a large, durable table top, a one-of-a-kind T-square style fence, and a durable steel stand that work together to create a router table that meets all of your precision-routing needs.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the system is the Kreg's Precision Router Table Fence. This innovative, anodized-aluminum fence features a table saw-style T-Square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. \u003c\/p\u003e\n\u003cp\u003eTo ensure exact positioning, the fence features a measuring scale that allows you to position the fence and make adjustments based on the bit you are using. An included micro-adjust wheel makes setups simple to ensure precision.\u003c\/p\u003e\n\u003cp\u003eIndependent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit and to maximize chip collection into the fence’s built-in dust port. \u003c\/p\u003e\n\u003cp\u003eThe fence sits on Kreg’s large, durable Precision Router Table Top. This 24\" x 32\" table has a 1\"-thick MDF core that absorbs vibration and offers mass to help create a stable router table. Workpieces glide easily on the tough high-laminate surface. Underneath, steel-reinforcing struts ensure that the table will stay flat.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make routing even easier, the table and fence sit atop a steel stand, which can be adjusted from 31\" to 39 \" high. The pre-drilled holes make it easy to mount accessories and customize the stand.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMultipurpose, self-squaring router table fence system\u003c\/li\u003e\n\u003cli\u003eHigh-performance table top with precision insert-plate system\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, customizable, easily-adjustable steel stand\u003c\/li\u003e\n\u003cli\u003eHeavy-duty table with Easy-Slide low-friction surface\u003c\/li\u003e\n\u003cli\u003ePrecision T-Square style fence with independent sliding faces\u003c\/li\u003e\n\u003cli\u003eIntegrated dust collection\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 31\" to 39\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable dimensions:\u003c\/strong\u003e 24\" x 32\"\u003cbr\u003e\u003cstrong\u003eInsert plate dimensions:\u003c\/strong\u003e \u003cspan\u003e3\/8\" x 9 1\/4\" x 11 3\/4\"\u003cbr\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e Anodized aluminum, MDF, melamine, steel\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) Precision Router Table Top\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Precision Router Table Fence\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Multi-Purpose Shop Stand\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/uEg_FR7zjj0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":3612039493,"sku":"PRS1045","price":647.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/PRS1045-1.jpg?v=1680551438"},{"product_id":"jwl-1221vs-wood-lathe","title":"JET JWL-1221VS 12\" x 21\" Variable Speed Wood Lathe","description":"\u003cp\u003eThe JET 1221VS was redesigned with enhanced features and more control than ever before. With a variable speed range of 60-3,600 RPM, a digital RPM readout, and forward and reverse operation, the entire design of the 1221 Lathe is focused on control. The 1221VS is an excellent lathe for smaller projects like turning bowl blanks and candle holders. Plus, its small footprint is perfect for shops of any size, especially those with limited space.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eAdd the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jwl-1221vs-stand\" target=\"_blank\" title=\"JET JWL-1221VS Lathe Stand product page\" rel=\"noopener\"\u003e1221VS Stand\u003c\/a\u003e for extra height adjustment.\u003c\/p\u003e\n\u003cp\u003eYou can extend your 1221VS Lathe to 43\" with the \u003ca title=\"JET JWL-1221VS Bed Extension product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/jet-jwl-1221vs-bed-extension\" target=\"_blank\"\u003eJWL-1221VS Bed Extension\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded Controls and large DRO with recessed Power Switch\u003c\/li\u003e\n\u003cli\u003eAcme thread in Tailstock\u003c\/li\u003e\n\u003cli\u003e24 integrated indexing positions\u003c\/li\u003e\n\u003cli\u003eForward to reverse is a smooth transition\u003c\/li\u003e\n\u003cli\u003eInnovative ratchet style belt tension system (patent pending)\u003c\/li\u003e\n\u003cli\u003eIntegrated, spring loaded spindle lock\u003c\/li\u003e\n\u003cli\u003eOptimally designed speed ranges\u003c\/li\u003e\n\u003cli\u003eUnrivaled speed control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 136.7 lbs.\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 6\u003cbr\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 1hp\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 115V\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 121.25 lbs.\u003cbr\u003e\u003cstrong\u003eNumber of Indexing Positions:\u003c\/strong\u003e 24\u003cbr\u003e\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e 39.3\" x 17.7\" x 17.7\"\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 115\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size (Amps.):\u003c\/strong\u003e 10\u003cbr\u003e\u003cstrong\u003eShipping Dimensions (L x W x H):\u003c\/strong\u003e 35.82\" x 14.56\" x 21.25\"\u003cbr\u003e\u003cstrong\u003eSpindle Bore:\u003c\/strong\u003e 3\/8\"\u003cbr\u003e\u003cstrong\u003eSwing Over Bed:\u003c\/strong\u003e 12-1\/2\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/KrcvNEMpglU?si=Jz1QByyaLC7o-A2v\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003cbr\u003e\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":4114070277,"sku":"JT9-719200","price":989.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/719200-1.jpg?v=1748882641"},{"product_id":"festool-clamping-elements-for-the-mft-2-pack","title":"Festool Clamping Elements for the MFT (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eThe ultimate complement to the Festool MFT system, the Festool Clamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application. Cam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape. The low profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT, freeing your work surface from obstruction. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for a perfect fit with the 20 mm holes of the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Tables\" rel=\"noopener noreferrer\"\u003eFestool MFT Multifunction Table\u003c\/a\u003e. Includes 2 Clamping Elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for a perfect fit with the 20mm holes of the Festool MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor safe and precise securing of the workpiece (sawing, sanding, routing, drilling, etc.)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Clamping Elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046405,"sku":"488030","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/488030-1.jpg?v=1754021860"},{"product_id":"festool-screw-clamps-120-mm-2-pack","title":"Festool Screw Clamps - 120mm (2 Pack)","description":"\u003cp\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Includes 2 clamps.\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-300mm-2-pack\" title=\"Festool Screw Clamps - 300mm (2-pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e11-13\/16\" (300 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 4-11\/16\" (120 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 4-11\/16\" (120mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046597,"sku":"489570","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489570-1.jpg?v=1754021858"},{"product_id":"festool-screw-clamps-300mm-2-pack","title":"Festool Screw Clamps - 300mm (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned to work seamlessly with holes and channels on the Festool \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" title=\"All Festool MFT tables\" target=\"_blank\"\u003eMFT Multifunction Table\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e and can be inserted into bottom t-slot of Festool \u003c\/span\u003e\u003ca title=\"Festool FS Guide Rails product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e\u003cspan\u003e for limitless positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-120-mm-2-pack\" target=\"_blank\" title=\"Festool Screw Clamps - 120mm (2-pack) product page\" rel=\"noopener\"\u003e4-11\/16\" (120 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 11-13\/16\" (300 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 11-13\/16\" (300mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cdiv class=\"productheader\"\u003e\u003ciframe width=\"420\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"productheader\"\u003e[\/TABS]\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047237,"sku":"489571","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489571-1.jpg?v=1754021857"},{"product_id":"fs-rapid-clamp-w-fixed-jaw-fs","title":"Festool FS-Rapid Clamp FS-RAPID\/R","description":"\u003cp\u003eDesigned for rapid positioning and clamping on \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFestool FS Guide Rails\u003c\/a\u003e. The FS-Rapid Clamp is particularly useful for fast and reliable clamping and securing FS Guide Rails to sheet good materials. Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge.\u003c\/p\u003e\n\u003cp\u003eIncludes clamping jaws and fixed jaws.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for rapid positioning and clamping of Festool FS Guide Rails to all types of sheet good material\u003c\/li\u003e\n\u003cli\u003eMounts to guide rails using the continuous bottom t-slot for limitless adjustability\u003c\/li\u003e\n\u003cli\u003eOne-handed trigger action enables quick set up on material edge\u003c\/li\u003e\n\u003cli\u003eFor clamping and positioning guide rails FS, FS\/2, and GRP\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamping jaws\u003c\/li\u003e\n\u003cli\u003eFixed jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rUUR4Mu7kCc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047301,"sku":"489790","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489790-3.jpg?v=1754021856"},{"product_id":"festool-quick-clamp-fs-hz-160","title":"Festool Quick Clamp FS-HZ 160","description":"\u003cp\u003eThe Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Clamping thickness 6-1\/4\" (160mm). Includes 1 clamp.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecures your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/li\u003e\n\u003cli\u003eRatcheting mechanism enables easy locking and quick release for a a more efficient workflow\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 6-1\/4\" (160mm)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/inLS-BDD8ls?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047749,"sku":"491594","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/491594-3.jpg?v=1754021853"},{"product_id":"festool-multi-function-table-mft-3","title":"Festool Multi-Function Table MFT\/3","description":"\u003cp\u003eThe MFT\/3 is the perfect height to make work more comfortable. V-groove channels make squaring the miter gauge easier, more accurate, and provides a mechanism for attaching accessories. The MFT\/3 has many features like perforated tops, side channels for attaching clamps, and folding legs to allow two working heights, as well as easy transport.\u003c\/p\u003e\n\u003cp\u003eMore than just a work table, the MFT\/3 comes with many accessories that make up an entire working system. The integrated guide rail system allows you to cut with confidence. Accurately cut materials up to 27\" in width — a feat which is impossible with the largest of miter saws. Combined with Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/track-saws-menu\/brand_festool\" title=\"All Festool Track Saws\" rel=\"noopener\" target=\"_blank\"\u003eTS Series Track Saws\u003c\/a\u003e and \u003ca title=\"All Festool Routers\" href=\"https:\/\/www.oaktreesupply.com\/collections\/routers-shapers-menu\/brand_festool\" target=\"_blank\"\u003eOF Series Routers\u003c\/a\u003e, the included 42\" guide rail is used to make precise, splinter-free cuts that are safer than with a conventional table or radial arm saw.\u003c\/p\u003e\n\u003cp\u003eThe angle unit supplied with the MFT3 Multi-Function Table attaches using the V-Groove side rail enabling easy removal and quick, accurate reattachment. Using the angle units detents, make precise angle cuts at common angles. Changing the cut angle is much easier when compared to a miter saw where the entire saw head must be repositioned. The angle stop allows the guide rail and saw to remain stationary while repositioning the workpiece and fence.\u003c\/p\u003e\n\u003cp\u003eFestool's system approach to tool design is exemplified in the use of the integrated T-Groove side rail to quickly and easily connect two or more Multi-Function Tables to one another. Simply insert the optional \u003ca title=\"Festool MFT Table connector VS product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/table-connector-1x-mft\" target=\"_blank\"\u003eConnectors\u003c\/a\u003e into the side rails to bridge the MFTs to one another multiplying your work surface. It's that simple! On the jobsite or in the workshop, use the MFT\/3 as a supplemental work surface for sanding, jointing, clamping, or just about anything else.\u003c\/p\u003e\n\u003cp\u003eThe perforated table top is compatible with most Festool Clamps, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Festool Quick Clamp MFT-HZ 80 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-quick-clamp-mft-hz-80\" target=\"_blank\"\u003eQuick Clamp MFT-HZ 80\u003c\/a\u003e: Ergonomic lever makes it simple to clamp and release material using one hand. Can clamp materials as high as 3-1\/8\" (80mm).\u003c\/li\u003e\n\u003cli\u003eScrew Clamps FSZ (\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-120-mm-2-pack\" title=\"Festool Screw Clamps - 120mm (2-pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e120mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-300mm-2-pack\" title=\"Festool Screw Clamps - 300mm (2-pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e300mm\u003c\/a\u003e): Traditional screw clamp design with specialized head. Clamping thickness of 4-11\/16\" (120mm) or 11-13\/16\" (300mm).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Festool Quick Clamp FS-HZ 160 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-quick-clamp-fs-hz-160\" target=\"_blank\"\u003eQuick Clamp FS-HZ\u003c\/a\u003e 160: Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow. Clamping thickness of 6-1\/4\" (160mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Festool Clamping Elements for the MFT (2 Pack) product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-clamping-elements-for-the-mft-2-pack\" target=\"_blank\"\u003eClamping Elements MFT\u003c\/a\u003e: Cam-action levers and low-profile design secure your workpiece from the sides for complete and even surface sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-quick-clamp-mft-hz-80\" title=\"Festool Quick Clamp MFT-HZ 80 product page\" rel=\"noopener\" target=\"_blank\"\u003eMFT Quick Clamp\u003c\/a\u003e: Clamp and release workpieces with one hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCan easily be carried to a jobsite, due to its compact size and light weight\u003c\/li\u003e\n\u003cli\u003eAccurate and repeatable cuts with the guide rail and plunge saw or routers\u003c\/li\u003e\n\u003cli\u003eClamp faster with uniform holes and Festool clamps\u003c\/li\u003e\n\u003cli\u003eUse with legs folded out, at full height, or folded in and set on the floor\u003c\/li\u003e\n\u003cli\u003eSupports loads up to 260 lbs.\u003c\/li\u003e\n\u003cli\u003eAdjustable to a maximum cutting depth of three inches, accurately cut materials over 27\" wide- a feat which is impossible with the largest of miter saws\u003c\/li\u003e\n\u003cli\u003eAngle unit attaches using the V-Groove side rail enabling easy removal and quick, accurate reattachment\u003c\/li\u003e\n\u003cli\u003eAngle stop prevents movement of the angle unit by stabilizing the end of the fence and can be easily removed or repositioned using the locking knob\u003c\/li\u003e\n\u003cli\u003eThe knobs are ergonomically placed further from the side of the MFT to provide ample room for rotating the knob without damaging your most valuable tools - your hands\u003c\/li\u003e\n\u003cli\u003eThe rubber foot caps protect the floor and make the MFT more resistant to lateral movement during use\u003c\/li\u003e\n\u003cli\u003eThe perforated work surface and integrated side rails of the Multi-Function Table provide a wide variety of clamping configurations\u003c\/li\u003e\n\u003cli\u003eWorking with the edge of the workpiece or irregular shapes has never been easier thanks to Festool's clamps which are designed to integrate with the MFT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e 61.73 lbs. (28 kg)\u003cbr\u003e\u003cstrong\u003eMax. workpiece width\u003c\/strong\u003e 27\" (700 mm)\u003cbr\u003e\u003cstrong\u003eMax. workpiece thickness\u003c\/strong\u003e 3-5\/64\" (78 mm)\u003cbr\u003e\u003cstrong\u003eTable height, legs folded away\u003c\/strong\u003e 7\" (180 mm)\u003cbr\u003e\u003cstrong\u003eTable dimensions\u003c\/strong\u003e 45\" (1 157 mm) x 30\" (773 mm)\u003cbr\u003e\u003cstrong\u003eTable height, legs unfolded\u003c\/strong\u003e 35\" (900 mm)\u003cbr\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e 264 lbs. (120 kg)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMultifunction Table MFT\/3\u003c\/li\u003e\n\u003cli\u003e42\" Guide Rail FS 1080\u003c\/li\u003e\n\u003cli\u003eFence Clamp MFT\/3-ZK\u003c\/li\u003e\n\u003cli\u003eAdjustable Stop\u003c\/li\u003e\n\u003cli\u003eCMS Router Table Miter Gauge\u003c\/li\u003e\n\u003cli\u003eGuide Rail Deflector\u003c\/li\u003e\n\u003cli\u003eSupport Unit\u003c\/li\u003e\n\u003cli\u003eSwivel Unit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BZPy8gztEaM\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114052677,"sku":"495315","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/495315-1.jpg?v=1754021831"},{"product_id":"abr-systainer-sys-stf-d125-tl-replaces-489463","title":"Festool Abrasive Systainer SYS-STF D125 TL","description":"\u003cp\u003eStores any abrasive in a dedicated space, clearly organized, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Sanding Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAchieve ideal results: Efficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003eConvenient and safe: abrasives can be organized into five compartments. Clearly arranged storage of used and reusable abrasives\u003c\/li\u003e\n\u003cli\u003eSystem gets it done: Compatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15.6\" x 11.7\" x 4.4\" (396 x 296 x 112 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114062789,"sku":"576781","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576781-1.jpg?v=1754021820"},{"product_id":"abr-systainer-sys-stf-d90-tl-replaces-497482","title":"Festool Abrasive Systainer³ SYS-STF-D77\/D90\/93V","description":"\u003cp\u003eThis Systainer stores any abrasive in a dedicated space, clearly organized, efficiently protected against moisture, and always at hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, and connect with just a single turn. With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other Systainers beforehand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-sanding-discs\" target=\"_blank\" title=\"All Abrasive Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003eAbrasives can be organized into 8 compartments\u003c\/li\u003e\n\u003cli\u003eCompatible with and can be connected to all Systainer generations, mobile dust extractors, and many other system accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W): \u003c\/strong\u003e15.6\" x 11.7\"\u003cbr\u003e\u003cstrong\u003eNumber of compartments:\u003c\/strong\u003e 8\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!----\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114062917,"sku":"576784","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576784main.jpg?v=1754021819"},{"product_id":"abr-systainer-sys-stf-d150-tl-replaces-487431","title":"Festool Abrasive Systainer SYS-STF D150","description":"\u003cp\u003eStores any abrasive in a dedicated space, clearly organised, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand.\u003c\/p\u003e\n\u003cp\u003eWith insert for abrasives dia. 6\" (150 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-sanding-discs\/brand_festool\" target=\"_blank\" title=\"All Festool Sanding Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e\u003ca title=\"All Festool Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-discs-attachments-menu\/brand_festool\" target=\"_blank\"\u003e\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAchieve ideal results more quickly: \u003c\/strong\u003eEfficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient and safe: \u003c\/strong\u003eThe abrasives can be organized into 10 compartments. Clearly arranged storage of used and reusable abrasives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystems get it done: \u003c\/strong\u003eCompatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-round protection: \u003c\/strong\u003eEverything is effectively protected against dust, water spray or changes in temperature in the Systainer³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional appearance: \u003c\/strong\u003eFrom the workshop right through to the construction site – always perfectly organized. This will also impress your customers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15.6\" x 11.7\" x 9.3\" (396 x 296 x 237 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114063109,"sku":"576785","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576785-3.jpg?v=1754021818"},{"product_id":"compact-cleaning-set-t-loc-replaces-456736","title":"Festool Standard Cleaning Set RS-ST D 27\/36-Plus","description":"\u003cp\u003eThis Festool cleaning set goes perfectly with a Festool CT dust extractor and comes in its own Systainer for convenient storage. It is a compact, durable, convenient and lightweight set that is easy to transport as well as being ideal for quick cleanup on jobsites and in workshops. Perfect for all cleaning tasks in narrow spaces, on surfaces and on the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurved hand tube D 36 HR-K AS\u003c\/li\u003e\n\u003cli\u003eStandard floor nozzle\u003c\/li\u003e\n\u003cli\u003eExtension pipes D 36 VR-K AS\u003c\/li\u003e\n\u003cli\u003eCrevice nozzle, D 36 FD-300\u003c\/li\u003e\n\u003cli\u003eSuction brush\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 137\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114063301,"sku":"577257","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/577257.jpg?v=1754021817"},{"product_id":"cleaning-set-f-tradesmen-replaces-454766","title":"Festool Floor Cleaning Set RS-BD D 36-Plus","description":"\u003cp\u003eGet the most out of your CT Dust Extractor investment by supplementing it with a Festool cleaning set. Packed in a Systainer, the Workshop Cleaning Set is an ideal solution for cleaning up commercial shops, both large and small. Keep this set docked on your CT for quick and easy cleanup, helping you maintain a clean, safe and efficient workspace. The Workshop Cleaning Set features durable stainless steel components, assuring you of a long service life for your most demanding work.\u003c\/p\u003e\n\u003cp\u003eThe wide nozzle with two casters and two brush strip inserts makes this cleaning set optimal for cleaning large floor areas.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCurved hand tube D 36 HR-K AS\u003c\/li\u003e\n\u003cli\u003eIndustrial Floor Nozzle\u003c\/li\u003e\n\u003cli\u003eStainless Steel Extension Tube\u003c\/li\u003e\n\u003cli\u003eCrevice nozzle, D 36 FD-300\u003c\/li\u003e\n\u003cli\u003eSmooth suction hose D 36, antistatic\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 437\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114064133,"sku":"577259","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/577259-1.jpg?v=1754021817"},{"product_id":"festool-domino-tenons-assortment-for-the-df-500","title":"Festool Domino Tenons Assortment for the DF 500","description":"\u003cp\u003eFor the Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-domino-joiner-df-500-q-set\" target=\"_blank\" title=\"Festool Domino Joiner DF 500 Q Set product page\" rel=\"noopener\"\u003eDF 500 Domino Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlways have the right dominos and cutters on hand! This assortment Systainer not only provides convenient storage for all of your dominos, but it includes all 5 cutters that are compatible with the DF 500 as well as 1,060 assorted dominos. A great deal when you buy the set! \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFestool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The DOMINO Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(450) 4x20mm Tenons\u003c\/li\u003e\n\u003cli\u003e(225) 5x30mm Tenons\u003c\/li\u003e\n\u003cli\u003e(150) 6x40mm Tenons\u003c\/li\u003e\n\u003cli\u003e(100) 8x40mm Tenons\u003c\/li\u003e\n\u003cli\u003e(75) 8x50mm Tenons\u003c\/li\u003e\n\u003cli\u003e(60) 10x50mm Tenons\u003c\/li\u003e\n\u003cli\u003e(3) Plastic Removable Storage Bins with Dividers\u003c\/li\u003e\n\u003cli\u003e(1) 4mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 5mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 6mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 8mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 10mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) Systainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15-1\/2\" x 11-1\/2\" x 6-1\/8\" (396mm x 296mm x 157.5mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114064453,"sku":"576794","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576794-bits.jpg?v=1754021814"},{"product_id":"sys-storage-box-sys-sb","title":"Festool SYS-Storage Box SYS-SB","description":"\u003cp\u003eDon’t go fishing for what you need with the Festool SYS-SB Storage Box. Tackle all your small part needs keeping everything organized and easily accessible. No more guessing where things are thanks to the clear cover panels that help keep everything in its place. Easy to grab and go with the large bale-style handle and full Systainer system integration, the Storage Box helps you take care of the minor details so you can focus on the task at hand.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe horizontal folding layout helps to prevent small pieces from migrating inside even if you drop it\u003c\/li\u003e\n\u003cli\u003eFour compartments and five included containers adapt to your organization needs\u003c\/li\u003e\n\u003cli\u003eSee-through, flush-mounted cover panels facilitate quick searches while keeping everything in its place no matter where you go\u003c\/li\u003e\n\u003cli\u003eEquipped with a large, bale-style handle, the SYS-Storage unit is easy to grab and go, either bare-handed or with gloves\u003c\/li\u003e\n\u003cli\u003eIntegrates fully with all SystainerS, SORTAINERS, and Tool Boxes\u003c\/li\u003e\n\u003cli\u003eLarge, easy-to-grasp bale-style handle – ergonomics for improved transport, bare-handed or with gloves\u003c\/li\u003e\n\u003cli\u003eHorizontal orientation keeps everything in its place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.51 lbs. (2.5 kg)\u003cbr\u003e\u003cstrong\u003eHeight including handle:\u003c\/strong\u003e 9-1\/2\" (240 mm)\u003cbr\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15-1\/2\" (396 mm) x 11-1\/2\" (296 mm) x 6-1\/2\" (167 mm)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"420\" src=\"\/\/www.youtube.com\/embed\/c5rkE63gS6A?rel=0\" height=\"315\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114067781,"sku":"499901","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/499901-2.jpg?v=1754021812"},{"product_id":"5-random-orbit-sander-ets-125-replaces-571610","title":"Festool Random Orbital Sander ETS 125 REQ-Plus","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact and lightweight enough for extended vertical and overhead use\u003c\/li\u003e\n\u003cli\u003eStep-less variable speed for adjusting to the needs of your application\u003c\/li\u003e\n\u003cli\u003eBalanced Vibration Stop (VS) delivers smooth operation\u003c\/li\u003e\n\u003cli\u003eJetstream design delivers highly efficient dust removal, resulting in cleaner air and better finishes\u003c\/li\u003e\n\u003cli\u003eAccepts 5\" (125mm) hook-and-loop abrasive discs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Festool ETS 125 Sander is the ideal machine for finishing or pre-sanding. This versatile one-handed sander is compact and lightweight, and at only 2.4 pounds, it’s perfect for overhead work. It has a 5\/64\" (2mm) sanding stroke, allowing it to produce exceptional fine sanding results. With features like a sanding pad brake and vibration-stop balancing, the ETS 125 is in a class of its own.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe ETS 125 comes with a Soft Backing Pad for most general purpose finish sanding. A \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-super-soft-backing-pad-for-es-ets-125-sanders\" title=\"Festool Super Soft Backing Pad for ES \u0026amp; ETS 125 Sanders product page\" rel=\"noopener\" target=\"_blank\"\u003eSuper Soft Pad\u003c\/a\u003e (more forgiving and produces better finish on contours and profiles) is also available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSanding edges? The optional \u003ca rel=\"noopener\" title=\"Festool Edge Sanding Attachment ETS\/ETSC 125 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-edge-sanding-attachment-ets-etsc-125\" target=\"_blank\"\u003eEdge Sanding Attachment\u003c\/a\u003e allows you to effortlessly sand any kind of edge, angle, or curvature.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight sanding stroke:\u003c\/strong\u003e With a 5\/64\" (2mm) sanding stroke, the ETS 125 produces exceptional fine and superfine sanding results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomics:\u003c\/strong\u003e Formed to fit comfortably in any size hand. Compact and light weight enough for extended vertical and overhead use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e Jetstream design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration-stop:\u003c\/strong\u003e Balanced design delivers better finish results, smooth operation and greater comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad Brake:\u003c\/strong\u003e Stops the pad quickly, so you can worry less about damaging your freshly finished workpiece when setting your tool down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStickFix Hook \u0026amp; Loop Design:\u003c\/strong\u003e Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, leading to longer abrasive and pad life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control:\u003c\/strong\u003e Step-less speed control allows you to adjust to the needs of the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-It Power Cord:\u003c\/strong\u003e Interchangeable cord design allows you to quickly switch between tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2.65 lbs. (1.2 kg)\u003cstrong\u003e\u003cbr\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eInterchangeable sanding pad dia.:\u003c\/strong\u003e 5\" (125mm)\u003cbr\u003e\u003cstrong\u003eSanding stroke:\u003c\/strong\u003e 0.079\" (2mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 250 watt\u003cbr\u003e\u003cstrong\u003eEccentric motion speed: \u003c\/strong\u003e6,000 - 12,000 RPM\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eETS 125 Sander\u003c\/li\u003e\n\u003cli\u003eStickFix Soft Sander Backing Pad for ETS 125 Sander, D125\u003c\/li\u003e\n\u003cli\u003eFestool Edge Protector\u003c\/li\u003e\n\u003cli\u003eLong-life dust bag\u003c\/li\u003e\n\u003cli\u003ePlug-It power cord\u003c\/li\u003e\n\u003cli\u003eSystainer \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114071621,"sku":"576070","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576070-6.jpg?v=1754021810"},{"product_id":"festool-multi-mode-sander-rotex-ro-90-dx-feq-plus","title":"Festool Multi-Mode Sander ROTEX RO 90 DX FEQ-Plus","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch from round pad to delta pad in seconds, no tools required\u003c\/li\u003e\n\u003cli\u003eSand open surfaces and tight spaces\/corners with the same ease and precision\u003c\/li\u003e\n\u003cli\u003eThree modes: aggressive sanding for quick removal, random orbit for excellent finish results, and polishing for producing a gleaming shine\u003c\/li\u003e\n\u003cli\u003eIncludes edge protector to keep your workpiece free of damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSwitch from sanding with a round pad to a delta-shaped pad in seconds with the ROTEX RO 90. It's the only professional sander that sands open spaces as easily as it conquers corners. The design is nothing short of an engineering marvel. Use the aggressive action to quickly and efficiently remove wood, paint, or varnish. Or, seamlessly switch to the fine setting for final finishing. \u003c\/p\u003e\n\u003cp\u003eWith the RO 90 DX, add the ability to swap the round pad for a delta-shaped pad to reach deep into corners and crevices. Transform rough surfaces with startling power, stripping stubborn paints and other coatings, and making you the master of all materials. The aggressive mode delivers material removal like that of a grinder. Shaving off hours of sanding, you quickly and easily achieve astonishing results.\u003c\/p\u003e\n\u003cp\u003eSlip on the edge protector to prevent incidental contact with adjacent surfaces. Create sensationally smooth finishes with ease. Sit back in amazement as you gaze at the results you achieved with utter ease. Connected to a \u003ca rel=\"noopener\" title=\"All Festool Dust Extractors\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_dust-extractors\" target=\"_blank\"\u003eFestool Dust Extractor\u003c\/a\u003e, work in a near-dust-free environment. Well-balanced, vibration-free. \u003c\/p\u003e\n\u003cp\u003eEquip your ROTEX with one of the many polishing pads, sponges, felts, or sheepskin, and you're ready to buff your finish to a gleaming luster. Use the variable speed setting to dial in the perfect polishing speed for more delicate finishes.\u003c\/p\u003e\n\u003cp\u003eThe ROTEX is available in 90 mm, \u003ca title=\"Festool Multi-Mode Sander ROTEX RO 125 FEQ-Plus product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/rotex-ro-125-feq-multi-mode-sander\" target=\"_blank\"\u003e125 mm\u003c\/a\u003e and \u003ca title=\"Festool Multi-Mode Sander ROTEX RO 150 FEQ-Plus product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-rotex-ro-150-feq-plus\" target=\"_blank\"\u003e150 mm\u003c\/a\u003e pad sizes. Note that the RO 90 is the only ROTEX Sander with delta-pad capability.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFor both open spaces and inside corners\u003c\/li\u003e\n\u003cli\u003eLightweight and compact\u003c\/li\u003e\n\u003cli\u003eSwitch from sanding with a round pad to a delta-shaped pad in seconds, no tools required\u003c\/li\u003e\n\u003cli\u003eAggressive sanding mode is gear-driven and allows quick removal of material or stubborn finishes\u003c\/li\u003e\n\u003cli\u003eRandom orbital mode provides astonishing finish sanding results with ease\u003c\/li\u003e\n\u003cli\u003ePolishing mode and accessories offer the ability to product a brilliant, gleaming shine on nearly any surface\u003c\/li\u003e\n\u003cli\u003eThe only ROTEX that functions as a detail sander\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSanding pad diameter\u003c\/strong\u003e 3.5\" (90mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection dia.\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eSanding stroke\u003c\/strong\u003e 1\/8\" (3mm)\u003cbr\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e 3.31 lbs (1.5 kg)\u003cbr\u003e\u003cstrong\u003ePower consumption\u003c\/strong\u003e 400 watt\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRO 90 DX\u003c\/li\u003e\n\u003cli\u003eFastFix Soft Sander Backing Pad, D90\u003c\/li\u003e\n\u003cli\u003eStickFix sanding pad V93\u003c\/li\u003e\n\u003cli\u003eFestool PROTECTOR\u003c\/li\u003e\n\u003cli\u003ePlug-It power cord\u003c\/li\u003e\n\u003cli\u003eSystainer SYS 2 T-LOC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/HHZw8S5BJF0\" height=\"315\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114071749,"sku":"576263","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/571823-2.jpg?v=1754021808"},{"product_id":"accessory-kit-imperial-of2200","title":"Festool OF 2200 Router Accessory Kit (Imperial)","description":"\u003cp\u003eThe Festool Accessory Kit for the \u003ca title=\"Festool Router OF 2200 EB-F-Plus product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-router-of-2200-eb-f-plus\" target=\"_blank\"\u003eOF 2200 Router\u003c\/a\u003e comes with everything you need for making the most out of your router. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGuide Rail Kit\u003c\/li\u003e\n\u003cli\u003eParallel Edge Guide\u003c\/li\u003e\n\u003cli\u003e(2) Guide Rods\u003c\/li\u003e\n\u003cli\u003eCopying ring dia. 1\/2\" (12,7 mm)\u003c\/li\u003e\n\u003cli\u003eCopying ring dia. 3\/4\" (19.05 mm)\u003c\/li\u003e\n\u003cli\u003eCopying ring dia. 1\" (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eCopying ring dia. 1-3\/8\" (34.93 mm)\u003c\/li\u003e\n\u003cli\u003eBase runner D36\u003c\/li\u003e\n\u003cli\u003eBase runner for copying rings\u003c\/li\u003e\n\u003cli\u003eExtension \u003c\/li\u003e\n\u003cli\u003eSystainer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":7363030853,"sku":"576833","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576832_0b6c77cb-e910-438c-96ac-b70d1080a505.jpg?v=1754021792"},{"product_id":"festool-router-of-2200-eb-f-plus","title":"Festool Router OF 2200 EB-F-Plus","description":"\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3-5\/32\" (80mm) of plunge depth travel that can be fine tuned in increments of 1\/10mm\u003c\/li\u003e\n\u003cli\u003eThree-bearing spindle minimizes deflection and bit wobble for smoother operation\u003c\/li\u003e\n\u003cli\u003eDust extraction column on back of router extends to the top and keeps both the power cord and dust hose out of the way\u003c\/li\u003e\n\u003cli\u003eRetractable, spring-loaded 360° dust shroud maximizes dust extraction while providing high visibility of the workpiece\u003c\/li\u003e\n\u003cli\u003eVariable speed from 10,000 to 22,000 RPM with 2200 watts of power\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/2\" collet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe OF 2200 is Festool's most powerful router. It can easily plunge into 8\/4 hard maple and make a 1\/2\" groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.\u003c\/p\u003e\n\u003cp\u003eDust extraction is incredibly efficient with the OF 2200. The Dust Extraction Column is placed on the back of the router and extends to the top, and includes a swivel nozzle - a design which keeps the power cord (also top mounted) and dust extraction hose out of your way. Coupled with the \u003ca title=\"Festool Boom Arm CT48 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-ct48-boom-arm-set\" target=\"_blank\"\u003eFestool Boom Arm\u003c\/a\u003e, work smarter and take full advantage of operation without being impeded by cords and hoses (Festool recommends using a 36mm hose).\u003c\/p\u003e\n\u003cp\u003eOperating the OF 2200 could never be easier. Controls are clearly labeled with icons indicating purpose and adjustment direction. Work smarter without having to locate the manual to make less common adjustments. Use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application.\u003c\/p\u003e\n\u003cp\u003eWith 80mm of travel, the plunge depth of the OF 2200 is phenomenal. The collet actually plunges 10mm below the base of the router providing another option for bit changes. Use the micro-adjustment knob to fine tune plunge depth in increments of 1\/256\" (1\/10mm). The four position depth stop turret provides pre-configurable plunge depths including a 5\/64\" (2mm) finishing pass setting.\u003c\/p\u003e\n\u003cp\u003eUse the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application. An onboard cross reference guide shows the spindle RPM for each setting. The OF 2200 employs Multi-Material Control (MMC) electronics to ensure constant speed under load. That means that the speed of the bit is constant as you plunge and move through the workpiece\u003c\/p\u003e\n\u003cp\u003eIncludes 1\/2\" collet only. \u003ca title=\"Festool 8 mm Collet with Nut product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/collet-8mm-of1400-2000-2200\" target=\"_blank\"\u003e8 mm\u003c\/a\u003e and \u003ca title='Festool 1\/4\" Collet With Nut product page' href=\"https:\/\/www.oaktreesupply.com\/products\/festool-1-4-collet-with-nut-1\" target=\"_blank\"\u003e1\/4\" collets\u003c\/a\u003e available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is the imperial version of this tool. It is identical to the previous version with the exception of the units on the depth scale. OF Routers produced after 2021 are NOT compatible with the Router Table CMS and all variations.\u003c\/p\u003e\n\u003cp\u003eAll Festool power tools include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Extraction Column: \u003c\/strong\u003eThe Dust Extraction Column keeps the power cord (also top mounted) and dust extraction hose out of your way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntuitive Controls: \u003c\/strong\u003eControls are clearly labeled with icons indicating purpose and adjustment direction - use the onboard variable speed dial cross reference to select the appropriate spindle speed based on material and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Spindle Brake: \u003c\/strong\u003eThe Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTremendous Plunge Depth Capacity: \u003c\/strong\u003e80 mm of travel and micro-adjustment knob to fine tune plunge depth in increments of 1\/256\" (1\/10mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Bearing Design: \u003c\/strong\u003eWith bearings at the top, middle and bottom, the spindle is less likely to wobble - this is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable speed control: \u003c\/strong\u003eUse the Variable Speed Control of the OF 2200 to dial in the appropriate spindle speed based on the material and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Depth Stop Rod: \u003c\/strong\u003eThe Locking Depth Stop Rod allows you to save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Tool Ratcheting Collet: \u003c\/strong\u003eBit changes have never been easier - the ingenious retractable 360° dust shroud and wide plunge column spacing enables open access to the collet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetractable, Spring-Loaded 360º Dust Shroud: \u003c\/strong\u003eThe shroud maximizes dust extraction while providing high visibility of the workpiece, and retracts back into the locked position after the router is fully plunged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. bit diameter:\u003c\/strong\u003e 3-1\/2\" (89mm)\u003cbr\u003e\u003cstrong\u003eRouting stroke:\u003c\/strong\u003e 3-5\/32\" (80mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.20 lbs (7.8 kg)\u003cbr\u003e\u003cstrong\u003eRouting depth fine adjustment range:\u003c\/strong\u003e 3\/4\" (20mm)\u003cbr\u003e\u003cstrong\u003eCollet dia.:\u003c\/strong\u003e 1\/4\" - 1\/2\" (6 - 12.7mm)\u003cbr\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 2 ,00 watt\u003cbr\u003e\u003cstrong\u003eDust extraction connection diameter:\u003c\/strong\u003e 1-1\/16\" or 1-7\/16\" (27mm or 36mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRouter\u003c\/li\u003e\n\u003cli\u003e1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003eChip Catcher\u003c\/li\u003e\n\u003cli\u003eDust extraction hood\u003c\/li\u003e\n\u003cli\u003eOpen ended spanner, WAF 24\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/mCEPiss8U2Q\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":7363030981,"sku":"576223","price":1219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576223-1.jpg?v=1754021790"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/oaktree-gift-guide\/brand_lamello.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}