{"title":"Lamello Tenso P-System Connectors","description":"","products":[{"product_id":"lamello-p-system-connectors-tenso-p-14","title":"Lamello Tenso P-14 (without preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter connections between 22.5° and 180° — great for obtuse angles and difficult-to-clamp workpieces\u003c\/li\u003e\n\u003cli\u003eTenso Connectors without the preload clip are ideal for smaller projects where only one or two connectors are used\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse with \u003ca rel=\"noopener\" title=\"Lamello Tenso P-14 Preload Clips product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" target=\"_blank\"\u003epreload clips\u003c\/a\u003e (sold separately) for easier and more precise alignment\u003c\/li\u003e\n\u003cli\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-14-starter-kit\" title=\"Lamello Tenso P-14 Starter Set\" rel=\"noopener\" target=\"_blank\"\u003eStarter Set\u003c\/a\u003e with pre-load clips and installation tool included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-14 is a self-clamping connector with three functions: alignment, clamping, and connecting. The very high level of clamping force allows workpieces to be glued without the need for screw clamps or pressure. This time-saving technique allows projects to be installed piece by piece instead of being required to glue everything at the same time, clamp, and wait for glue to dry.\u003c\/p\u003e\n\u003cp\u003eThe Tenso without preload clip is ideal for smaller items of furniture when only one or two connectors are used. Smaller workpieces and 90° connections in particular are easily glued without the preload clip. Using the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" title=\"Lamello Tenso P-14 Preload Clips product page\" rel=\"noopener\" target=\"_blank\"\u003eP-14 Preload Clips\u003c\/a\u003e prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eBased on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the workpiece in just seconds. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed, and simplicity throughout the entire design, production, transport, and assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. If using the optional preload clips, snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-14 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConcealed, self-clamping connector\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 x 27 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 33 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NGwy7pxFyn8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650369306823,"sku":"145415","price":105.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39650383462599,"sku":"145425","price":375.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650369339591,"sku":"145435","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-14main.jpg?v=1776709426"},{"product_id":"lamello-p-system-connectors-tenso-preload-clips","title":"Lamello Tenso P-14 Preload Clips","description":"\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUsing the P-14 Preload Clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eAlso ideal for larger projects when several connectors must be assembled simultaneously in a row.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"300","offer_id":39940927422663,"sku":"145426","price":85.0,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":39940927455431,"sku":"145436","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensopreloadedclip.jpg?v=1724867731"},{"product_id":"lamello-tenso-p-10-p-system-connectors","title":"Lamello Tenso P-10 (with preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks just like \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e, but has a smaller installation depth and can be used in thinner materials\u003c\/li\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter and bevel connections\u003c\/li\u003e\n\u003cli\u003eUse with preload clips for precise alignment and more adjustability\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses. Developed for miters (45°) from a material thickness of 15mm or butt joints (90°) from a panel thickness of 12mm, the Tenso P-10 is ideal for glued furniture, components, small shelving units, door frames, trim, false edges, cubbies, plate racks, etc.\u003cbr\u003e\u003cbr\u003eUsing the preload clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. Use the preload clip installation tool to snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: All Tenso P-10 boxes are sold with the corresponding amount of pre-load clips and one pre-load clip installation tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFor thin materials\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 30 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/y7KEsFOZINI?si=ZzA_FPxUIM-fvAyc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362580693209,"sku":"145418","price":125.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362580725977,"sku":"145428","price":420.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":43362580758745,"sku":"145438","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-10withclipmain.jpg?v=1765983421"},{"product_id":"lamello-tenso-p-14-starter-kit","title":"Lamello Tenso P-14 Starter Kit","description":"\u003cp\u003e\u003cspan\u003eThis kit includes 80 Tenso P-14 Connectors, 80 pre-loaded clips, and a pre-load clip insertion tool!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter connections between 22.5° and 180° — great for obtuse angles and difficult-to-clamp workpieces\u003c\/li\u003e\n\u003cli\u003eTenso Connectors without the preload clip are ideal for smaller projects where only one or two connectors are used\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse with the preloaded clips for easier and more precise alignment, or for larger projects when several connectors must be assembled simultaneously in a row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-14 is a self-clamping connector with three functions: alignment, clamping, and connecting. The very high level of clamping force allows workpieces to be glued without the need for screw clamps or pressure. This time-saving technique allows projects to be installed piece by piece instead of being required to glue everything at the same time, clamp, and wait for glue to dry.\u003c\/p\u003e\n\u003cp\u003eThe Tenso without preload clip is ideal for smaller items of furniture when only one or two connectors are used. Smaller workpieces and 90° connections in particular are easily glued without the preload clip. Using the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" title=\"Lamello Tenso P-14 Preload Clips product page\" rel=\"noopener\" target=\"_blank\"\u003eP-14 Preload Clips\u003c\/a\u003e prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eBased on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the workpiece in just seconds. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed, and simplicity throughout the entire design, production, transport, and assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. If using the preload clips, snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-14 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConcealed, self-clamping connector\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 x 27 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 33 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) Tenso P-14 Connectors\u003c\/li\u003e\n\u003cli\u003e(80) Preloaded clips\u003c\/li\u003e\n\u003cli\u003ePreload clip installation tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/NGwy7pxFyn8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":46346961453273,"sku":"145415S","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/tensop-14starterkit_525a22e4-b332-4472-b691-b1ec2cda4722.jpg?v=1738100166"},{"product_id":"lamello-4mm-p-system-depth-adjuster-cap","title":"Lamello 4mm Tenso P-10 Depth Adjuster Cap","description":"\u003cp\u003eFor the Lamello Zeta P2 Joiner.\u003c\/p\u003e\n\u003cp\u003eThe 4mm P-System Depth Cap attaches to your Zeta's depth adjuster to make an 8mm groove in combination with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-10-p-system-connectors\" target=\"_blank\" title=\"Lamello Tenso P-10 (with preload clip) P-System Connectors product page\" rel=\"noopener\"\u003eTenso P-10 Connectors\u003c\/a\u003e. The non-standard 8mm groove allows for a wider variety of projects, such as dividing panel joints in material as thin as 16mm.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yHJD7u4aRd0?si=T1y2FCNk35mfacd8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":48578251423961,"sku":"145439","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/145439-1.jpg?v=1777405330"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/lamello-tenso-p-connectors\/price_under-10.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}