{"title":"Jet and Powermatic Price Drops","description":"\u003cp\u003ePrices valid through December 31, 2026\u003c\/p\u003e","products":[{"product_id":"jet-6-helical-head-jointer","title":"JET JJ-6HHDX 6\" Helical Head Jointer 1hp, 1PH, 115\/230V","description":"\u003cp\u003eThe JET JJ-6CSDX (#708457DXK) \u0026amp; JJ-6HHDX (#708466DXK) 6\" Jointers are identical in design and construction with the major exception being the cutterheads. The \u003ca title='JET JJ-6CSDX 6\" Deluxe Jointer w\/ Quick-Set Knives 1hp, 1PH, 115\/230V product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jj-6csdx-6-deluxe-jointer-1hp-1ph-115-230v-quick-set-knives\" target=\"_blank\"\u003eJJ-6CSDX\u003c\/a\u003e comes with a three-knife cutterhead, while the JJ-6HHDX is equipped with a helical cutterhead with 27 carbide inserts.\u003c\/p\u003e\n\u003cp\u003eThe JJ-6HHDX comes with an all steel enclosed base cabinet. An integral tab at each end of the cabinet bottom makes securing the jointer to the floor easy when a suitable surface is available. This cabinet provides a stable platform and puts the table surface at a comfortable 31-1\/4\" above the floor.\u003c\/p\u003e\n\u003cp\u003eThe base cabinet also houses the 1hp, 1 phase 115\/230V TEFC (totally enclosed fan cooled) motors (pre-wired 115V) and wiring to help isolate those components from the dust-prone jointer environment. A large door on the rear of the base cabinet provides easy access to the motor should that be needed in the future. The 1hp motor spins the JET JJ-6HHDX cutterhead at a very consistent 6,000 RPM for a good balance between speedy material removal and a silky-smooth surface on the wood.\u003c\/p\u003e\n\u003cp\u003eAlso in the base cabinet is the dust chute that runs from under the cutterhead down to the cabinet side. A 4\" diameter port makes attaching your dust collector easy and adapter free. The angle of the dust chute makes it very efficient at evacuating the debris from beneath the cutterhead. The JET JJ-6HHDX has a paddle-style switch mounted on a stalk that places it behind and above the fence.\u003c\/p\u003e\n\u003cp\u003eThe JET JJ-6HHDX Jointer features a long, cast iron table with a smooth, flat precision-machined finish that keeps the wood sliding predictably while ensuring accuracy. At 55-3\/4\" x 7-3\/8\" this table makes straightening large project pieces accurate and reliable. The overall cut capacity of 6-1\/16\" wide by 1\/2\" deep provides plenty of capacity for the most active of home wood shops. The outfeed table even has built-in 1\/2\" rabbeting ledges that add a little more versatility to the JJ-6HHDX.\u003c\/p\u003e\n\u003cp\u003eBoth the infeed and outfeed tables feature exclusive front-mounted handwheels that make table height changes easy and accurate. The infeed table has a full 1\/2\" range of motion and features an easy-to-read scale that makes setting the exact cut depth you want simple. An automatic limiter on the JJ-6HHDX prevents accidentally taking overly aggressive cuts more than 1\/8\" deep. The depth limiter can be manually overridden easily, but it requires the operator to intentionally release it.\u003c\/p\u003e\n\u003cp\u003eThe JET JJ-6HHDX jointer comes equipped with our true helical cutterhead. This high precision cutterhead has 27, 4- sided carbide inserts mounted on individual seats. This system requires no adjustment of the cutters. Each insert has precisely machined angles in its top and all four cutting edges. When combined with the equally precise mounting pads on the cutterhead these angles produce an ultra smooth slicing action that creates a highly refined surface on the wood.\u003c\/p\u003e\n\u003cp\u003eThe inserts are made of high-quality carbide that holds an edge for a very long time. Combined with the true, low impact slicing action, the cutters stay sharp for a very long time. Should an edge eventually go dull, you simply index the cutters to another of the four identical cutting edges and go back to work.\u003c\/p\u003e\n\u003cp\u003eAnother nice feature of the helical cutterhead is that should a hidden piece of metal get onto the JJ-6HHDX, only the inserts directly in line with the metal will need attention. Those few cutters can be indexed or replaced, whichever is necessary, minimizing cost and downtime. We even include five extra carbide inserts, mounting screws and a pair of wrenches to handle the replacement!\u003c\/p\u003e\n\u003cp\u003eThis jointer comes with a versatile 32-5\/8\" long by 3-7\/8\" tall cast iron fence system that tilts to 45-degrees in and out to handle all of your bevel needs. Changing fence bevel angle or position on the table is tool free. All fence controls are located near the center to keep them in easy reach of the operator.\u003c\/p\u003e\n\u003cp\u003eFully adjustable stops are provided at 90° and both 45° settings. The 90° stop features a flip-out bar that provides instant access to the 45° bevel capability away from the operator. It also makes returning to the 90° setting just as quick. The fence has a composite insert on the bottom edge that lets it slide smoothly across the table surface for easy adjustments. This insert also prevents the fence from scratching the table surface.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in dust chute with 4\" port connects to your collection system for efficient dust\/chip disposal\u003c\/li\u003e\n\u003cli\u003eCenter fence controls are conveniently mounted to allow quick adjustments\u003c\/li\u003e\n\u003cli\u003eExclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections\u003c\/li\u003e\n\u003cli\u003eExtra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish\u003c\/li\u003e\n\u003cli\u003eHeavy-duty cast iron infeed and outfeed tables with precision machined finish\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability\u003c\/li\u003e\n\u003cli\u003eHelical cutterhead with indexable carbide inserts for a superior finish and quieter cut\u003c\/li\u003e\n\u003cli\u003eIndustrial push-button controls are conveniently placed for easy access\u003c\/li\u003e\n\u003cli\u003ePowerful 1HP motor easily handles the toughest jointing tasks\u003c\/li\u003e\n\u003cli\u003eTwo-way tilting fence with positive stops at 45° and 90° to handle bevel operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 6,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 350 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 13\/6.5\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 1hp\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 27\u003cbr\u003e\u003cstrong\u003eOutfeed Table Length:\u003c\/strong\u003e 27-3\/8\"\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 115V\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 31-1\/4\"\u003cbr\u003e\u003cstrong\u003eTable Size (LxW):\u003c\/strong\u003e 56\" x 7-3\/8\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":4114069125,"sku":"JT9-708466DXK","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/708466DXK-1.jpg?v=1748882643"},{"product_id":"powermatic-8-jointer-with-helical-cutterhead-60hh","title":"Powermatic 60HH 8\" Helical Head Jointer","description":"\u003cp\u003eThis 8\" jointer meets the demand for accuracy while combining unique, user-friendly functions. The Powermatic 60HH helical head jointer is designed for precision jointing with enhanced ease of use. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel.\u003c\/p\u003e\n\u003cp\u003eThe tables provide 73\" long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHelical cutterhead with 54 four-sided carbide inserts delivers a smoother surface finish while reducing noise and tear-out during jointing\u003c\/li\u003e\n\u003cli\u003e73\" total table length offers increased workpiece support for better accuracy on long boards\u003c\/li\u003e\n\u003cli\u003eQuick-adjust infeed table lever allows rapid height changes with fine control for precise depth-of-cut settings\u003c\/li\u003e\n\u003cli\u003eHandwheel-operated worm gear fence system enables smooth, controlled fence tilting for accurate edge jointing\u003c\/li\u003e\n\u003cli\u003eDovetail-mounted infeed and outfeed tables maintain alignment while providing stable, vibration-resistant operation\u003c\/li\u003e\n\u003cli\u003eNon-marring fence insert protects the cast iron table surface during fence adjustments\u003c\/li\u003e\n\u003cli\u003eHigh-mounted power switch and control box improves visibility and operator access during use\u003c\/li\u003e\n\u003cli\u003eMagnetic push blocks store directly on the machine for convenient access and improved shop organization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 7,000 RPM\u003cbr\u003e\u003cstrong\u003eCutting Capacity (W x D):\u003c\/strong\u003e 8\u003cspan\u003e\"\u003c\/span\u003e x 1\/2\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eFence Size:\u003c\/strong\u003e 38\" x 4-3\/4\"\u003cbr\u003e\u003cstrong\u003eInfeed Table Length:\u003c\/strong\u003e 35-1\/4\u003cspan\u003e\"\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 450 CFM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 9\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 490 lbs.\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 54\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 20 A\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Helical\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":4162227205,"sku":"PM9-1610086K","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1610086K-1.jpg?v=1748888371"},{"product_id":"powermatic-open-end-drum-sander-pm2244","title":"Powermatic Open End Drum Sander PM2244","description":"\u003cp\u003ePowermatic knows woodworker's expectations are high when it comes to their machines. With that in mind, when they engineer a new product, they are continuously working to improve the woodworker's capabilities while simultaneously enhancing their experience. That is why they are proud to introduce the PM2244 Drum Sander. The PM2244 will exceed your expectations with its world-class design, usability and sophistication.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBelt tracking is designed to reduce the need for manual adjustment\u003c\/li\u003e\n\u003cli\u003eClosed stand with storage for keeping abrasives organized\u003c\/li\u003e\n\u003cli\u003eDrum carriage is designed to provide strength and consistent performance over time\u003c\/li\u003e\n\u003cli\u003eEmergency stop for quick shutoff\u003c\/li\u003e\n\u003cli\u003eIncluded infeed\/outfeed tables provide 37-1\/2\" of support for the workpiece\u003c\/li\u003e\n\u003cli\u003eIntegrated casters make it easy to move unit around the shop\u003c\/li\u003e\n\u003cli\u003eIntegrated LED Control Panel shows power, belt speed, and DRO\u003c\/li\u003e\n\u003cli\u003eLarge, chrome handwheel makes adjusting the drum height smooth and simple\u003c\/li\u003e\n\u003cli\u003eTable parallelism is adjusted with a dial on the outside of the conveyor bed, eliminating adjustments to the entire drum carriage\u003c\/li\u003e\n\u003cli\u003eThe feed logic system monitors the load on the drum motor and regulates the speed of the conveyor motor to maintain the highest feed rate without overload\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eConveyor Speed:\u003c\/strong\u003e 0 to 10 FPM\u003cbr\u003e\u003cstrong\u003eDrum Bearing Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eDrum Diameter:\u003c\/strong\u003e 5\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDrum Length:\u003c\/strong\u003e 22\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDrum Speed:\u003c\/strong\u003e 1,720 RPM\u003cbr\u003e\u003cstrong\u003eMinimum Dust Collection Required:\u003c\/strong\u003e 800 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum Board Thickness:\u003c\/strong\u003e 4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum Board Width:\u003c\/strong\u003e 22\"\u003cbr\u003e\u003cstrong\u003eMinimum Board Length:\u003c\/strong\u003e 2-3\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMinimum Board Thickness:\u003c\/strong\u003e 1\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 14\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 1-3\/4hp\u003cbr\u003e\u003cstrong\u003eNumber of Sanding Drums:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 20 A\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Drum Sander\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 328 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19523980549,"sku":"PM9-1792244","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1792244_main.jpg?v=1748888368"},{"product_id":"powermatic-6-jointer-with-helical-head-54hh","title":"Powermatic 54HH 6\" Helical Head Jointer","description":"\u003cp\u003eCreating flat, straight surfaces is crucial in the quest to build elegant projects. Virtually all forms of joinery and the tools that cut them depend on straight edges and square cuts. The Powermatic 54HH 6\" Jointer makes it easy to achieve the high levels of accuracy you need in this always-crucial operation.\u003c\/p\u003e\n\u003cp\u003eThe 1 HP, 1Ph, 115\/230V motor (pre-wired 115V) is factory-mounted within the base cabinet and can be converted to use 230V power should that be desirable. The motor is on a special mount within the base cabinet that allows the user to adjust belt tension should that become necessary. The base also contains the dust collection chute that evacuates debris from below the cutterhead. The chute guides that debris to the exterior 4\" diameter port near the floor.\u003c\/p\u003e\n\u003cp\u003eThere are many cutterhead designs that carry the helical moniker, including simple straight blades broken into segments and dispersed around the cutterhead cylinder. However, despite the name, they retain many of the liabilities of the long blade designs. Powermatic incorporates the performance of a true segmented, shear-cutting helical head.\u003c\/p\u003e\n\u003cp\u003eThe helical cutterhead is so effective because its carbide inserts are arranged in spiral-shaped rows. The inserts have a 4\" radius ground into them and are mounted so they approach the wood at a 14° angle. That creates a true shear cut that eliminates much of the impact and the resulting fiber disturbance other cutterhead designs deliver to the wood.\u003c\/p\u003e\n\u003cp\u003eBecause the inserts themselves and the seats into which they fit are so precisely machined, there is no adjustment or \"fitting\" necessary. Indexing or replacing an insert takes just seconds. Simply loosen its retaining screw, turn the insert to its new position and tighten the screw.\u003c\/p\u003e\n\u003cp\u003eAt 7-1\/4\" wide and 66\" long, the cast iron Powermatic 54HH Jointer table is one of the longest available in this class and provides plenty of support for even large work pieces. The tables are precision-ground to insure flatness and each is mounted on dovetailed ways that keep them perfectly aligned through height changes.\u003c\/p\u003e\n\u003cp\u003eThe all cast iron 4\" tall by 38\" long fence system is, like the tables, precisely ground to assure straightness. The fence tilts up to 45° towards and away from the tables. Fully adjustable stops at 90° (vertical) and each 45° position make setup fast and help keep the 54HH accurate with minimal maintenance.\u003c\/p\u003e\n\u003cp\u003eThe Powermatic 54HH Jointer has been designed and built to make your wood straightening tasks easy and accurate. The heavy duty construction and materials mean that this machine will remain an important part of your woodworking shop for many years to come.\u003c\/p\u003e\n\u003cp\u003eWant to make your jointer mobile? Order the compatible Mobile Base \u003ca title=\"Mobile Base for Powermetic 54HH Jointer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/mobile-base-for-powermetic-54hh-jointer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e66\" long adjustable infeed and outfeed tables provide more working surface\u003c\/li\u003e\n\u003cli\u003eEnlarged sheet metal stand provides a sturdy base\u003c\/li\u003e\n\u003cli\u003eExtra-long 38\" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts\u003c\/li\u003e\n\u003cli\u003eFence controls are center mounted for convenience\u003c\/li\u003e\n\u003cli\u003eDurable carbide cutters combined with low impact, shear cutting action means the inserts have an extremely long life\u003c\/li\u003e\n\u003cli\u003eFine\/quick adjustment lever on infeed table for precision cuts\u003c\/li\u003e\n\u003cli\u003eOutfeed table height can be adjusted via handwheel\u003c\/li\u003e\n\u003cli\u003eInfeed table height adjusted using a unique lever system\u003c\/li\u003e\n\u003cli\u003eHelical cutterhead with 40 four sided carbide inserts provides smoother, quieter cutting and finer finish than conventional systems\u003c\/li\u003e\n\u003cli\u003ePush button switch is lockable to prevent accidental starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 2-1\/2\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed (RPM):\u003c\/strong\u003e 6,000\u003cbr\u003e\u003cstrong\u003eCutting Capacity (W x D):\u003c\/strong\u003e 6 x 1\/2\u003cbr\u003e\u003cstrong\u003eTable Dimensions (L x W): \u003c\/strong\u003e66\" x 7-1\/4\"\u003cbr\u003e\u003cstrong\u003eFence Dimensions (L x H): \u003c\/strong\u003e38\" x 4\"\u003cbr\u003e\u003cstrong\u003eDust Collection Minimum CFM Required (CFM):\u003c\/strong\u003e 450\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eInfeed Table Length:\u003c\/strong\u003e 32-1\/2\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 13\/6.5\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power (HP):\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 115\/230\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 40\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 115\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e HELICAL\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4ksmWVG95UM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8rAB347VATw\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/g4GUPZyIWWM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":29790990217,"sku":"PM9-1791317K","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791317K-1.jpg?v=1748888366"},{"product_id":"powermatic-pj882hh-8-parallelogram-helical-head-jointer","title":"Powermatic PJ882HH 8\" Parallelogram Helical Head Jointer","description":"\u003cp\u003eThe 8\" Parallelogram Jointer offers performance and value in a machine loaded with features. The cutterhead is a helical design with (54) four-sided knife inserts that produce a superior finish and much quieter operation than conventional cutterheads. These inserts do not require adjustment once installed.\u003c\/p\u003e\n\u003cp\u003eThe Jointer has an extra long 82\" bed for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +\/-45 and 90°. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments.\u003c\/p\u003e\n\u003cp\u003eThe parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also ensures the table remains perfectly parallel, even after years of heavy use. The 2HP motor is totally enclosed in a heavy steel stand, providing plenty of power and stability for the most demanding jobs.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-mount switch for operator convenience\u003c\/li\u003e\n\u003cli\u003eLarge 8\" x 82\" precision ground cast iron table surface for heavy-duty work\u003c\/li\u003e\n\u003cli\u003eParallelogram design allows for easy and accurate adjustment of tables\u003c\/li\u003e\n\u003cli\u003eParallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments\u003c\/li\u003e\n\u003cli\u003ePatented handwheel with worm gear system for precise fence tilting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 3-1\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 7,000 RPM\u003cbr\u003e\u003cstrong\u003eCutting Capacity (W x D):\u003c\/strong\u003e 8 x 1\/2\"\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 450 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eInfeed Table Length:\u003c\/strong\u003e 44\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 9\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 54 four-sided inserts\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 20 A\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e Helical\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19745503936630,"sku":"PM9-1610082","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/PM9-1610082.jpg?v=1782310875"},{"product_id":"powermatic-pm1250-micro-afs","title":"Powermatic PM1250 Micro Air Filtration System","description":"\u003cp\u003eBreathe cleaner, safer air with confidence. The Powermatic PM1250 AFS with Micro Dust Collection Technology is one of the world's most innovative air filtration system for woodworkers. Powermatic's PM1250 continually purifies shop air with ultra-quiet efficiency by removing microscopic particulate from the shop environment.\u003c\/p\u003e\n\u003cp\u003ePatented filter technology works like a magnet, attracting and capturing the most dangerous dust particles from the air. Cycles air 5X per hour and proven to reduce airborne particles by 99.7% in a 680 sq.ft. area. Engineered fan blades increase airflow while reducing noise. Multiple mounting positions for maximum versatility in the shop, plus a handle on top to assist with carrying.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCycles air 5X per hour and proven to reduce airborne particles in a 680 sq. ft. area similar to an oversized 2 car garage\u003c\/li\u003e\n\u003cli\u003eEasy portability with a convenient carrying handle and includes multiple mounting positions for maximum versatility in the shop\u003c\/li\u003e\n\u003cli\u003eElectrostatic filter has a 3000-hour life and easy cleaning accessibility\u003c\/li\u003e\n\u003cli\u003eEnergy star rated and certified to California Air Resource Board (CARB) and Ozone emission standards\u003c\/li\u003e\n\u003cli\u003eFilter cleans easily with vacuum\u003c\/li\u003e\n\u003cli\u003eIntuitive controls featuring multiple speed settings\u003c\/li\u003e\n\u003cli\u003ePatented filter technology works like a magnet attracting and capturing the most dangerous dust particles from the air down to 0.1 micron\u003c\/li\u003e\n\u003cli\u003eQuieter than normal conversation at 50.8 dB on High and 41.3 dB on Low speed setting\u003c\/li\u003e\n\u003cli\u003eRadio frequency remote for quick and easy control anywhere\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eGross Weight:\u003c\/strong\u003e 52 lbs.\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e .31\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMotor Power (HP):\u003c\/strong\u003e N\/A\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 120\u003cbr\u003e\u003cstrong\u003eNet Weight (Lbs.):\u003c\/strong\u003e 38\u003cbr\u003e\u003cstrong\u003eOverall Dimensions (L x W x H) (In.):\u003c\/strong\u003e 27 x 25-5\/8 x 15\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 120\u003cbr\u003e\u003cstrong\u003eSpeeds:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eSpeeds (CFM):\u003c\/strong\u003e 441 \/ 567 \/ 754\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Air Filtration\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/CCPqu4V1JgI\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":19916535922806,"sku":"PM9-1791331","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1791331_alt5.jpg?v=1748888339"},{"product_id":"jj-6csdx-6-deluxe-jointer-1hp-1ph-115-230v-quick-set-knives","title":"JET JJ-6CSDX 6\" Deluxe Jointer w\/ Quick-Set Knives 1hp, 1PH, 115\/230V","description":"\u003cp\u003eThe JET JJ-6CSDX (#708457DXK) \u0026amp; JJ-6HHDX (#708466DXK) 6\" Jointers are identical in design and construction with the major exception being the cutterheads. The JJ-6CSDX comes with a three-knife cutterhead, while the \u003ca title='JET JJ-6HHDX 6\" Helical Head Jointer 1hp, 1PH, 115\/230V product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jet-6-helical-head-jointer\" target=\"_blank\"\u003eJJ-6HHDX\u003c\/a\u003e is equipped with a helical cutterhead with 27 carbide inserts.\u003c\/p\u003e\n\u003cp\u003eThe JET 6\" Long Bed Jointer offers one of the longest working surfaces in its' class. With the addition of an exclusive auto-set quick change knife system, you can replace or change all three blades in a fraction of the time other machines take. Make the JET 6\" Long Bed Jointer the next high-performance machine for your shop.\u003c\/p\u003e\n\u003cp\u003eThe JJ-6CSDX comes with an all steel enclosed base cabinet. An integral tab at each end of the cabinet bottom makes securing the jointer to the floor easy when a suitable surface is available. This cabinet provides a stable platform and puts the table surface at a comfortable 31-1\/4\" above the floor.\u003c\/p\u003e\n\u003cp\u003eThe base cabinet also houses the 1hp, 1 phase 115\/230V TEFC (totally enclosed fan cooled) motors (pre-wired 115V) and wiring to help isolate those components from the dust-prone jointer environment. A large door on the rear of the base cabinet provides easy access to the motor should that be needed in the future. The 1hp motor spins the JET JJ-6CSDX cutterhead at a very consistent 6000 RPM for a good balance between speedy material removal and a silky-smooth surface on the wood.\u003c\/p\u003e\n\u003cp\u003eAlso in the base cabinet is the dust chute that runs from under the cutterhead down to the cabinet side. A 4\"-diameter port makes attaching your dust collector easy and adapter free. The angle of the dust chute makes it very efficient at evacuating the debris from beneath the cutterhead. The JET JJ-6CSDX version has an industrial style push button switch set mounted in the base cabinet within easy reach of the operator.\u003c\/p\u003e\n\u003cp\u003eThe JET JJ-6CSDX Jointer features a long, cast iron table with a smooth, flat precision-machined finish that keeps the wood sliding predictably while ensuring accuracy. At 55-3\/4\" x 7-3\/8\" this table makes straightening large project pieces accurate and reliable. The overall cut capacity of 6 1\/16\"wide by 1\/2\" deep provides plenty of capacity for the most active of home wood shops. The outfeed table even has built-in 1\/2\" rabbeting ledges that add a little more versatility to the JET JJ-6CSDX.\u003c\/p\u003e\n\u003cp\u003eBoth the infeed and outfeed tables feature exclusive front-mounted handwheels that make table height changes easy and accurate. The infeed table has a full 1\/2\" range of motion and features an easy-to-read scale that makes setting the exact cut depth you want simple. The depth limiter can be manually overridden easily, but it requires the operator to intentionally release it.\u003c\/p\u003e\n\u003cp\u003eThe knives are aligned using JET€'S exclusive auto quick-set system that makes the critical knife height setting a simple and infrequent task. A pair of cams at each knife actually adjusts the knife height. Once set, the cams are locked in position and the knives can be reversed or replaced without having to reset the height and eliminates the need for a knife setting gauge. Precision-machined pockets in the knives let you slip them onto the cams and the setting is retained. The openings in the knives are wide enough that individual knives can be offset to compensate for a nick, further extending the life of each knife edge.\u003c\/p\u003e\n\u003cp\u003eThis jointer comes with a versatile 32-5\/8\" long by 3-7\/8\" tall cast iron fence system that tilts to 45° in and out to handle all of your bevel needs. Changing fence bevel angle or position on the table is tool free. All fence controls are located near the center to keep them in easy reach of the operator.\u003c\/p\u003e\n\u003cp\u003eFully adjustable stops are provided at 90° and both 45° settings. The 90° stop features a flip-out bar that provides instant access to the 45° bevel capability away from the operator. It also makes returning to the 90° setting just as quick. The fence has a composite insert on the bottom edge that lets it slide smoothly across the table surface for easy adjustments. This insert also prevents the fence from scratching the table surface.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in rabbeting ledge adds versatility\u003c\/li\u003e\n\u003cli\u003eCenter fence controls are conveniently mounted to allow quick adjustments\u003c\/li\u003e\n\u003cli\u003eExclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections\u003c\/li\u003e\n\u003cli\u003eExtra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish\u003c\/li\u003e\n\u003cli\u003eHeavy-duty cast iron infeed and outfeed tables with precision machined finish\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability\u003c\/li\u003e\n\u003cli\u003eIndustrial push-button controls are conveniently placed for easy access\u003c\/li\u003e\n\u003cli\u003ePowerful 1HP motor easily handles the toughest jointing tasks\u003c\/li\u003e\n\u003cli\u003eTwo-way tilting fence with positive stops at 45° and 90° to handle bevel operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 6,000 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Minimum CFM Required:\u003c\/strong\u003e 350 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 13\/6.5\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 1hp\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 115V\u003cbr\u003e\u003cstrong\u003eRabbeting Capacity:\u003c\/strong\u003e 1\/2\"\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 31-1\/4\"\u003cbr\u003e\u003cstrong\u003eTable Size (L x W):\u003c\/strong\u003e 56\" x 7-3\/8\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":20318789861494,"sku":"JT9-708457DXK","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/708457dxk-1.jpg?v=1748882580"},{"product_id":"powermatic-8-parallelogram-helical-cutterhead-jointer-with-armorglide-2hp-1ph-230v","title":"Powermatic 8\" Parallelogram Helical Cutterhead Jointer with ArmorGlide 2hp, 1PH, 230V","description":"\u003cp\u003eNow featuring ArmorGlide Technology, the Powermatic PJ882T 8-Inch Parallelogram Jointer offers performance and value in a machine loaded with features. This machine has an extra-long 82\" bed for better work support, and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +\/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments.\u003c\/p\u003e\n\u003cp\u003eThe parallelogram design keeps the table in close proximity to the cutterhead for improved finish, and allows for a fast depth of cut adjustment. This design also ensures the table remains perfectly parallel, even after years of tough duty. The 1\/8\" depth limiter control knob gives you quick adjustment ability and safety. A simple twist of the knob will disable this feature.\u003c\/p\u003e\n\u003cp\u003eThe cutterhead is a helical design with 54 four-sided knife inserts. These inserts produce a superior finish and much quieter operation than conventional cutterheads, and the inserts do not require adjustment once installed. The 2hp motor is totally enclosed in a heavy steel stand, providing plenty of power and stability for the most demanding jobs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArmorGlide Technology pros:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced visibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe dark surface reduces glare, so you can see where you're cutting better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust resistant:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDitch the steel wool and never worry about rust again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow friction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCoated tables require 50% less force, so you get more control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance-free:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGet rid of the waxes and messy cleaning supplies, so you can do more of what you love.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable coating:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eArmorGlide tables can withstand 250,000 passes without showing signs of wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/powermatic-8-parallelogram-straight-knife-jointer-with-armorglide-1ph-230v\" target=\"_blank\" title='Powermatic 8\" Parallelogram Straight Knife Jointer with ArmorGlide 2hp, 1PH, 230V product page' rel=\"noopener\"\u003estraight knife cutterhead\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eArmorGlide Technology gives you a low-friction, industrial-grade coating on the work surface that is rust resistant, requires less maintenance, and gives you more control\u003c\/li\u003e\n\u003cli\u003eHigh-mount switch for operator convenience\u003c\/li\u003e\n\u003cli\u003eLarge 8\" x 82\" precision ground cast iron table surface for heavy-duty work\u003c\/li\u003e\n\u003cli\u003e1\/8\" depth limiter control knob gives you quick adjustment ability and safety\u003c\/li\u003e\n\u003cli\u003eParallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments\u003c\/li\u003e\n\u003cli\u003ePatented handwheel with worm gear system for precise fence tilting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead dia.:\u003c\/strong\u003e 3-1\/16\"\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 7,000 RPM\u003cbr\u003e\u003cstrong\u003eCutting capacity (W x D):\u003c\/strong\u003e 8\" x \/12\"\u003cbr\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 2hp\u003cbr\u003e\u003cstrong\u003eMotor Amps:\u003c\/strong\u003e 9\u003cbr\u003e\u003cstrong\u003eMotor voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003e# of knives:\u003c\/strong\u003e 54 four-sided inserts\u003cbr\u003e\u003cstrong\u003eDust port outside dia.:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMin. dust collection:\u003c\/strong\u003e 450 CFM\u003cbr\u003e\u003cstrong\u003eInfeed table length:\u003c\/strong\u003e 44\"\u003cbr\u003e\u003cstrong\u003eRec. circuit size:\u003c\/strong\u003e 20 Amps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Ax6FRGYe8ug?si=Wt0aC6I1Ubru_cE2\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":44119471784153,"sku":"PM1-1610082T","price":4699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/1610082T-1.jpg?v=1748888308"},{"product_id":"jet-black-8-helical-head-jointer","title":"JET Black JWJ-8HH-BLK 8\" Helical Head Jointer","description":"\u003cp\u003eObtain perfect edges with the JET Black 8\" Helical Head Jointer. This premium jointer features a performance-coated table and a helical insert cutterhead with 36 carbide inserts that delivers exceptionally smooth and precise cuts. Powered by a quiet 2HP motor, it tackles even the toughest jointing tasks. Ideal for hobbyists and professionals alike looking for a sturdy 8\" jointer with minimal maintenance.\u003c\/p\u003e\n\u003cp\u003eMost notable on this machine is the JET Black performance-coated table. This low-friction coating is extremely smooth, and the dark color creates contrast to help you see your cut line better. The coating is also rust-resistant and maintenance-free, so you can skip the waxing\/polishing and spend more time cutting and building!\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJET Black Performance Coating: \u003c\/strong\u003eNo more cast-iron glare! The Black coated surface resists rust, reduces friction for smoother cuts, and eliminates the need for waxing or polishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient dust collection:\u003c\/strong\u003e Built-in 4\" dust port connects to your system for effective dust and chip disposal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe operation:\u003c\/strong\u003e Base-mounted On\/Off switch ensures easy and safe accessibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise fence adjustments:\u003c\/strong\u003e Two-way tilting fence with positive stops at 45° and 90° for accurate angled cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelical head cutter:\u003c\/strong\u003e Features 4 rows of 36 four-sided carbide inserts for smooth, precise cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate infeed table adjustment:\u003c\/strong\u003e Height adjustment lever allows for quick and precise modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy outfeed table adjustment:\u003c\/strong\u003e Handwheel with folding handle for convenient height adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Year Warranty for ultimate confidence\u003c\/strong\u003e: Rely on JET's 5-year warranty for assured durability and performance of your helical head jointer.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cb\u003eSpecs\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 5,500 RPM\u003cbr\u003e\u003cstrong\u003eCutterhead diameter:\u003c\/strong\u003e 2-15\/16\"\u003cbr\u003e\u003cstrong\u003eCutting capacity:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eMin. dust collection:\u003c\/strong\u003e 400 CFM\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 45° to 90°\u003cbr\u003e\u003cstrong\u003eDust port diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eMotor power:\u003c\/strong\u003e 2hp\u003cbr\u003e\u003cstrong\u003eMotor voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNumber of knives:\u003c\/strong\u003e 36\u003cbr\u003e\u003cstrong\u003eTable Height from Floor:\u003c\/strong\u003e 33\"\u003cbr\u003e\u003cstrong\u003eTable Size (W x L):\u003c\/strong\u003e 9-1\/2\" x 70-7\/8\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 405 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/nBUjUDF2yEg?si=bo_w_zdAYjU1eCts\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":46001153442009,"sku":"JT1-1373","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/JT1-1373-1.jpg?v=1748882379"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/jet-and-powermatic-price-drops\/type_jointers.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}