{"title":"Gifts Under $150","description":"","products":[{"product_id":"kreg-rip-cut-circular-saw-edge-guide","title":"Kreg Rip-Cut Circular Saw Edge Guide","description":"\u003cp\u003eGreat projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide.\u003c\/p\u003e\n\u003cp\u003eThe Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut circular saw guide, you can cut with the confidence you want and the precision you need.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. All you have to do is lock the saw in at the measurement you want — up to 24\" — using the built-in measuring scale, and then make your cut.\u003c\/p\u003e\n\u003cp\u003eWith a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut circular saw guide is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24\") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMake rip cuts and crosscuts on plywood and sheet goods up to 24\" wide\u003c\/li\u003e\n\u003cli\u003eCut multiple pieces to the same size with just one setup\u003c\/li\u003e\n\u003cli\u003eAdjustable lens cursor for calibration\u003c\/li\u003e\n\u003cli\u003eUse the oversize circular saw guide for precise control throughout the cut\u003c\/li\u003e\n\u003cli\u003eEliminate need for marking, measuring, and layout lines\u003c\/li\u003e\n\u003cli\u003eTake your saw to the material instead of having to take your material to the saw\u003c\/li\u003e\n\u003cli\u003eUniversal Sled accepts most circular saws — left or right blade\u003c\/li\u003e\n\u003cli\u003eReversible edge guide for left- or right-handed use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Universal Saw Sled\u003c\/li\u003e\n\u003cli\u003e(1) Aluminum Guide Rail\u003c\/li\u003e\n\u003cli\u003e(1) Precision Edge Guide\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FpCbU-zXFjM\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323240,"sku":"KMA2685","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMA2685-1.jpg?v=1671121377"},{"product_id":"kreg-90-right-angle-clamp","title":"Kreg 90° Right Angle Clamp","description":"\u003cp\u003eThe Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx auto-adjust technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1\/2\" plywood to thick 2x4 boards.\u003c\/p\u003e\n\u003cp\u003eThe steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.\u003c\/p\u003e\n\u003cp\u003eThe arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting. Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done. \u003c\/p\u003e\n\u003cp\u003eMany woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds pocket-hole joints at 90° during project assembly\u003c\/li\u003e\n\u003cli\u003eAutomaxx technology adjusts automatically to material thickness\u003c\/li\u003e\n\u003cli\u003eContoured grips for added comfort\u003c\/li\u003e\n\u003cli\u003ePin fits securely into pocket hole\u003c\/li\u003e\n\u003cli\u003eSwivel pad holds mating piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 3-1\/8\" (79 mm)\u003cbr\u003e\u003cstrong\u003eReach:\u003c\/strong\u003e 5\" (127 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with padded grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UkUGZSIHJQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323668,"sku":"KHCRA","price":46.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHCRA-1.jpg?v=1671132704"},{"product_id":"titebond-original-wood-glue","title":"Titebond Original Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sand-ability and is unaffected by finishes. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 50° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 4-6 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040827208,"sku":"5062","price":2.99,"currency_code":"USD","in_stock":true},{"title":"8 oz","offer_id":21919615549558,"sku":"5063","price":3.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21919615516790,"sku":"5064","price":5.99,"currency_code":"USD","in_stock":true},{"title":"32 oz","offer_id":21919615484022,"sku":"5065","price":7.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21919615451254,"sku":"5066","price":21.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767397081,"sku":"50609","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/originalmainimage.jpg?v=1750082510"},{"product_id":"titebond-ii-premium-wood-glue","title":"Titebond II Premium Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sand-ability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 55° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 3-5 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040831920,"sku":"5002","price":3.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21970287624310,"sku":"5003","price":5.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21970287591542,"sku":"5004","price":7.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21970287558774,"sku":"5005","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21970287526006,"sku":"5006","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642768052441,"sku":"50009","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIPremiummain.jpg?v=1750083305"},{"product_id":"titebond-iii-ultimate-wood-glue","title":"Titebond III Ultimate Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI\/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4oz","offer_id":46642769166553,"sku":"1412","price":4.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21895268499574,"sku":"1413","price":6.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":1040840364,"sku":"1414","price":9.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21895268466806,"sku":"1415","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21895268434038,"sku":"1416","price":38.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767986905,"sku":"14109","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIIUltimatemain.jpg?v=1750085018"},{"product_id":"titebond-ii-extend-wood-glue","title":"Titebond II Extend Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sand-ability and is unaffected by finishes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 16 oz. or 1 gallon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePasses Type II Water-Resistance testing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHot press and R-F compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSlower speed of set - longer open time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent-resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent sand-ability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"16oz","offer_id":21970287100022,"sku":"4134","price":8.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":1040841872,"sku":"4136","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Titebond-II-Extend.jpg?v=1652472193"},{"product_id":"wolverine-skew-grinding-attachment","title":"Oneway Wolverine Skew Grinding Attachment","description":"\u003cp\u003eDesigned for use with the \u003ca title=\"Oneway Wolverine Grinding Jig product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOne reason that the skew leaves such an incredible finish on work pieces is its very thin edge which leaves naturally cleaner cuts. This creates a problem sharpening the skew as this thin edge will easily fold over during grinding. Oneway’s Skew Grinding Attachment minimizes this problem by allowing the skew to be mechanically held. The unique offset handle position actually reduces the hollow grind generated and leaves a stronger more predictable tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the handle of the skew is placed in the pocket, the cutting edge becomes square to the sharpening wheel, helping the bevel to flatten itself out.\u003c\/li\u003e\n\u003cli\u003eUnique offset handle position helps to create a stronger and more predictable tool.\u003c\/li\u003e\n\u003cli\u003eDurable metal construction.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117311184,"sku":"2690","price":34.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2690-1.jpg?v=1673033692"},{"product_id":"wolverine-original-vari-grind","title":"Oneway Wolverine Original Vari-Grind","description":"\u003cp\u003eDesigned for use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" title=\"Oneway Wolverine Grinding Jig product page\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWith the Wolverine Original Vari-Grind, you can accurately produce and maintain traditional and long grinds on all bowl and spindle gouges from very small to 3\/4\" diameter.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCreate a side grind on your bowl gouges\u003c\/li\u003e\n\u003cli\u003eCreate a fingernail grind on your spindle gouges\u003c\/li\u003e\n\u003cli\u003eBlack coating to prevent rusting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1 lb.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 11.6\" x 5\" x 1.8\"\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVari-Grind Attachment\u003c\/li\u003e\n\u003cli\u003eInstructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117314516,"sku":"2480","price":60.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2480-1.jpg?v=1674849828"},{"product_id":"wolverine-grinding-jig","title":"Oneway Wolverine Grinding Jig","description":"\u003cp\u003eThe Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. The Wolverine System was designed to turn a low cost grinder into the ultimate tool for sharpening tools. It fits most 6”, 7”, 8”, and 10” grinders with little or no modification (please specify if to be used with a 10” grinder).\u003c\/p\u003e\n\u003cp\u003eOwning the Wolverine Grinding Jig will ultimately save you time, frustration, and money. You can now grind your tools properly the first time. Uniform cutting edges and single facet bevels will give you safer, more predictable tools. Because you are grinding your tools less, both your wheels and tools will last longer.\u003c\/p\u003e\n\u003cp\u003eThe Wolverine comes with two aluminum anodized bases, one for each side of the grinder. By mounting one under each wheel, grinding operations can rapidly be performed on either side of your grinder without having to reposition bases. Because bases mount directly under grinding wheels they are completely out of the way for occasional freehand grinding.\u003c\/p\u003e\n\u003cp\u003eBases are equipped with cam clamping that makes removing and installing attachments possible in seconds. The cam forces all attachments rigidly into the base which eliminates all play. This system is especially important as it allows the platform to be moved from the right to the left side of the grinder without disturbing the angle and maintaining a safe minimum clearance from the grinding wheel. This clearance should always be set from 1\/16” to 1\/8” from the wheel.\u003c\/p\u003e\n\u003cp\u003eThis Grinding Jig also comes equipped with an adjustable angle sturdy platform that has a 3” x 5” working area. It is made from 1\/4” thick steel and is machined square after welding. The result is a platform that is both incredibly sturdy and square. This platform can be used on both the left and right hand sides of the grinder. An adjustable speed handle makes adjustments quick and easy and ensures that the handle is never in the way.\u003cbr\u003e\u003cbr\u003eThe V-Arm slides in the base and holds your bevel angle constant. The handle of the tool is set into the Vee-Pocket and the tool’s bevel angle can be set while the grinder is off. It then becomes a simple process of fine adjustments to get the exact same grind every time. The V-Arm is long enough to hold any standard tool. Adjusting the arm is as easy as unlocking the clamping lever, moving the arm in or out and re-clamping the lever.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Grinding Jig can be easily used to sharpen the following tools:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGouges\u003c\/li\u003e\n\u003cli\u003eChisels\u003c\/li\u003e\n\u003cli\u003eScrapers\u003c\/li\u003e\n\u003cli\u003eParting tools\u003c\/li\u003e\n\u003cli\u003eSkews\u003c\/li\u003e\n\u003cli\u003eCarving tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Wolverine System was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Properly installed, with balanced wheels, this system will outperform grinders costing hundreds of dollars more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e Use with the \u003ca title=\"Oneway Wolverine Vari-Grind product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-original-vari-grind\" target=\"_blank\"\u003eVari-Grind\u003c\/a\u003e or \u003ca title=\"Oneway Vari-Grind 2 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/vari-grind-2-jig\" target=\"_blank\"\u003eVari-Grind 2\u003c\/a\u003e for improved grinding of side grinds and fingernail shapes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTwo Base System allows rapid grinding operations on either side of your grinder without having to re-position bases\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\" x 5\" adjustable platform can be used on both the left and right hand sides of the grinder\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable speed handle makes adjustments quick and easy and ensures that the handle is never in the way\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.3 lbs.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 30.75 x 9 x 3.25\"\u003cbr\u003e\u003cstrong\u003eInstallation Method:\u003c\/strong\u003e Surface-Mounted\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(2) Steel Bases with Easy Locking Handles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSteel Platform\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eV-Arm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAdjustable Steel Sharpening Platform\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWolverine Sharpening System DVD\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFull Assembly Setup Instructions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1117316240,"sku":"2291","price":101.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2291-1.jpg?v=1674849283"},{"product_id":"kreg-automaxx-face-clamp","title":"Kreg AUTOMAXX Face Clamp 3\"","description":"\u003cp\u003eWood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. These versatile wood clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2 x 4 and then a piece of 1\/2\" plywood without ever readjusting the wood clamp.\u003c\/p\u003e\n\u003cp\u003eEasily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the wood clamp maintains consistent clamping pressure with every thickness. \u003c\/p\u003e\n\u003cp\u003eWood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.\u003c\/p\u003e\n\u003cp\u003eAlso available as a \u003ca title='Kreg AUTOMAXX Face Clamp 6\" product page' href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-automaxx-face-clamp-6\" target=\"_blank\"\u003e6\" Clamp\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjusts automatically to match material thickness\u003c\/li\u003e\n\u003cli\u003eEasy-to-regulate pressure with a simple thumbscrew\u003c\/li\u003e\n\u003cli\u003eLarge clamp faces spread pressure evenly\u003c\/li\u003e\n\u003cli\u003eErgonomic padded grips prevent hand fatigue\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca title=\"Kreg Jig R3 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-jig-r3\" target=\"_blank\"\u003eKreg Pocket-Hole Jig R3\u003c\/a\u003e Clamp Pad Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 3\" (76 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with Molded Grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5WtWvQKBqXA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":21870291517558,"sku":"KHC3","price":36.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHC3-1.jpg?v=1675887664"},{"product_id":"wolverine-dressing-jig","title":"Oneway Wolverine Dressing Jig","description":"\u003cp\u003eThe Oneway Wolverine Dressing Jig provides the Turner with a simple and exact tool for the precision dressing and truing of grinding wheels.\u003c\/p\u003e\n\u003cp\u003eOneway's Dressing system is the only dresser on the market that allows controlled removal of this minute amount of material. Because the Dressing Jig removes such small amounts, your grinding wheels will last much longer.\u003c\/p\u003e\n\u003cp\u003eAfter dressing with the Dressing Jig, your wheels will be round, clean, and sharp. They will cut faster, cooler and finer. You will get a better finish on tools than anything you have ever experienced. Your tools will have sharper edges, smoother bevels, and all this will be done with less burning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful Tip: \u003c\/strong\u003eFor optimal performance, the diamond should be turned in its holder at regular intervals - a good target is to turn it after 10 or more.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4 carat non-re-settable diamond\u003c\/li\u003e\n\u003cli\u003eSupport Arm\u003c\/li\u003e\n\u003cli\u003eSturdy Diamond Holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1154070368,"sku":"2292","price":75.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2292-1.jpg?v=1674850674"},{"product_id":"vari-grind-2-jig","title":"Oneway Vari-Grind 2 Jig","description":"\u003cp\u003eThe Vari-Grind 2 Jig features all of the benefits of the original Vari-Grind, but increases ease of use and safety. The Vari-Grind 2 Jig restrains both the side-to-side motion of the tool, as well as the pivot point so that the tool cannot slip in either direction.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis cutting-edge woodturning tool uses pivot point location, allowing it to move in a true cylindrical motion. This allows the user to create perfect fingernail and side grinds, no matter what angle the jig is at. This sharpening tool makes getting a perfect edge on gouges and other tools much easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eBase not included. This product is ideal for those who already own the \u003ca title=\"Oneway Wolverine Grinding Jig product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/wolverine-grinding-jig\" target=\"_blank\"\u003eWolverine Grinding Jig\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImproved safety and ease of use\u003c\/li\u003e\n\u003cli\u003eSharpens tools up to 3\/4\" diameter\u003c\/li\u003e\n\u003cli\u003eHolds tools up to 5\/8\" diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.3 lbs.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.31 x 10.5 x 9.2\"\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOpti-Grind Attachment\u003c\/li\u003e\n\u003cli\u003eRestraining Arm\u003c\/li\u003e\n\u003cli\u003eDVD Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WYiadjRqdfA\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":1154070384,"sku":"3900","price":86.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/3900-1.jpg?v=1674850113"},{"product_id":"grr-rip-block","title":"MicroJig GRR-RIP Block Smart Pushblock","description":"\u003cp\u003eTransform your woodworking experiences with the GRR-RIP Smart Pushblock, a revolutionary tool that delivers unparalleled control, safety, and precision. This exceptional block has earned the title of #1 Best-Overall Pushblock by Popular Mechanics, reflecting the expert validation and trust placed in its performance and design.\u003c\/p\u003e\n\u003cp\u003eThe GRR-RIP BLOCK Smart Pushblock boasts auto-retracting heel technology that hooks the tail-end of your board, ensuring smooth and consistent movement throughout the cutting process. The proprietary Green GRR-RIP provides extreme hold, allowing you to tackle various materials with confidence and ease.\u003c\/p\u003e\n\u003cp\u003eThis pushblock is designed for versatility, featuring a 90° flip guide that allows for vertical footing on band saws and router tables. No matter the complexity of your project, the GRR-RIP Pushblock adapts to your needs, delivering outstanding results every time.\u003c\/p\u003e\n\u003cp\u003eThe ergonomic handle of this pushblock is specifically designed to exert directional pressure against the fence, providing stability and control during operation. No more hand strain or fatigue!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-retracting heel technology and proprietary Green GRR-RIP ensure a smooth cutting process\u003c\/li\u003e\n\u003cli\u003e90° flip guide for vertical footing on band saws and router tables, and an ergonomic handle for superior stability and control\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":1158628840,"sku":"GB-1","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/GB-1-1.jpg?v=1680785311"},{"product_id":"easy-wood-tools-ci4-nr-negative-rake-carbide-cutter-diamond","title":"Easy Wood Tools Ci4 NR Negative Rake Carbide Cutter - Diamond","description":"\u003cp\u003eThe Ci4 Diamond Negative Rake Replacement Carbide Cutter is made especially for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Easy Start Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-easy-start-detailer\" target=\"_blank\"\u003eEasy Start Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Mini Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-mini-easy-detailer\" target=\"_blank\"\u003eMini Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-mid-size-easy-detailer\" title=\"Easy Wood Tools Mid-Size Easy Detailer product page\" target=\"_blank\"\u003eMid-Size Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Full-Size Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-full-size-easy-detailer\" target=\"_blank\"\u003eFull-Size Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Easy Wood Tools Pro Easy Detailer product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-pro-easy-detailer\" target=\"_blank\"\u003ePro Easy Detailer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNegative Rake Carbide Cutters from Easy Wood Tools allow you to cut resin and acrylic with confidence. Traditional steel cutters can be tricky on man-made materials because they tend to grab and catch. EWT designed their negative rake cutters to solve that problem.\u003c\/p\u003e\n\u003cp\u003eRake refers to the angle of the tool in relation to the cutting surface. While most turning tools use a neutral (zero) rake, a negative rake slopes the face of the tool away from the cutting edge. This geometry produces a smoother, less aggressive cut, making the tool easier to control and safer to use, especially on engineered materials.\u003c\/p\u003e\n\u003cp\u003eThere is no sharpening necessary with EWT Carbide Cutters. When one side of the cutter gets dull, simply turn it to a new side. When all sides are used, then you can replace the cutter. You'll devote more time to turning instead of spending time sharpening your tools, and you'll save money in the long run, too.\u003c\/p\u003e\n\u003cp\u003eDiamond cutters are designed to create small coves, beads, and other fine details. This cutter fits all tools marked with Ci4. Be sure to double check for the correct size - it is engraved on your tool's shank!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Not \u003c\/strong\u003ecompatible with the Micro Easy Detailer and Mid-Size Micro Easy Detailer (these two use the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci7-nr-negative-rake-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci7 NR Negative Rake Carbide Cutter - Diamond product page\" target=\"_blank\"\u003eCi7 NR in Negative Rake Carbide Cutter\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Easy Wood Tools Carbide Cutter Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Easy_Wood_Tools_Carbide_Cutter_Guide.pdf?v=1769616487\" target=\"_blank\"\u003eEasy Wood Tools Carbide Cutter Guide \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eNegative rake angle for smooth, safe cuts on resin and acrylic\u003c\/li\u003e\n\u003cli\u003eOptimum grade of carbide for the longest lasting sharp cutting edge\u003c\/li\u003e\n\u003cli\u003eProprietary grinding process that results in the sharpest edge possible\u003c\/li\u003e\n\u003cli\u003ePrecision ground finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ZCMscJ7yVHc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":39407811166407,"sku":"7400NR","price":26.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/7400NR-1.jpg?v=1668455831"},{"product_id":"easy-start-carbide-turning-tools","title":"Easy Wood Tools Easy Start Rougher","description":"\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" target=\"_blank\"\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptional carbide cutters sold separately: \u003ca title=\"Easy Wood Tools Ci2-R2 Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" target=\"_blank\"\u003eStandard Carbide Cutter Ci2-R2 (radius)\u003c\/a\u003e and the \u003ca title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTurn your Easy Rougher into a beading tool with the newest \u003ca title=\"Easy Wood Tools NR Beading Cutters product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12.5\"\u003cbr\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 9\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 2\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/2WoQWRhIpLQ\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448032,"sku":"9520","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/9520.jpg?v=1634669251"},{"product_id":"mini-easy-carbide-turning-tools","title":"Easy Wood Tools Mini Easy Rougher","description":"\u003cp\u003e\u003cspan\u003eMini Tools feature all the same benefits of their mid-sized parents, just in a smaller size for projects like goblets, wine stoppers, knife handles, and bowls.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2 Carbide product page\" target=\"_blank\"\u003eCi2-R2 (radius)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTurn your Easy Rougher into a beading tool with the newest \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" title=\"Easy Wood Tools NR Beading Cutters product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\" square x 4\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 16\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 2\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHex\u003cspan\u003e key\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/v0CmXBeEGjg\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448176,"sku":"5200","price":104.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Untitled-1-Recovered-Recovered.jpg?v=1668534964"},{"product_id":"mid-size-carbide-turning-tools","title":"Easy Wood Tools Mid-Size Easy Rougher","description":"\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor. Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-sq-carbide-cutter-square\" title=\"Easy Wood Tools Ci2-SQ Carbide Cutter product page\" target=\"_blank\"\u003eStandard Cutter Ci2-SQ (square)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2 Carbide Cutter product page\" target=\"_blank\"\u003eStandard Carbide Cutter Ci2-R2 (radius)\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci2-r2-nr-negative-rake-carbide-cutter-2-radius\" title=\"Easy Wood Tools Ci2-R2-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci2-R2-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTurn your Easy Rougher into a beading tool with the newest \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" title=\"Easy Wood Tools NR Beading Cutters product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-1-8-nr-beading-cutter\" target=\"_blank\"\u003eNR Beading Cutters\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 14\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 3\/8\" square x 7\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 21\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 3\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Cutter Ci2-SQ (square)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/wj8NtvulI8M\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448208,"sku":"2200","price":139.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/2200.jpg?v=1634669759"},{"product_id":"full-size-carbide-turning-tools","title":"Easy Wood Tools Full-Size Easy Rougher","description":"\u003cp\u003eFull-Size Easy Wood Tools are perfect for when you're working on spindles, table legs, large bowls, and other big projects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Easy Rougher uses a square carbide cutter that is designed to be kept flat on the tool rest and level to the floor.  Use the Easy Rougher to quickly remove large amounts of material without having to stop to sharpen the tool frequently. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90 degrees to expose a fresh, sharp edge. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r4-carbide-cutter-4-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R4 Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard Carbide Cutter Ci1-R4 (4\" Radius)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOptional carbide cutters sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-sq-carbide-cutter-square\" target=\"_blank\" title=\"Easy Wood Tools Ci1-SQ Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eStandard Carbide Cutters Ci1-SQ (square)\u003c\/a\u003e, \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r2-carbide-cutter-2-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R2 Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eCi1-R2 (2\" radius)\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci1-r2-nr-negative-rake-carbide-cutter-2-radius\" target=\"_blank\" title=\"Easy Wood Tools Ci1-R2-NR Negative Rake Carbide Cutter product page\" rel=\"noopener noreferrer\"\u003eNegative Rake Carbide Cutter Ci1-R2-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e 16\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 1\/2\" square x 8.5\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 24.5\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci1-R4 (4\" Radius)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448240,"sku":"1200","price":151.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1200.jpg?v=1634667085"},{"product_id":"easy-wood-tools-pro-easy-detailer","title":"Easy Wood Tools Pro Easy Detailer","description":"\u003cp\u003e\u003cspan\u003eThe Easy Pro Detailer uses a diamond shaped cutter that is great for putting in accent lines or getting into areas where the other tools won't fit. When the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci4-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci4 Carbide Cutter product page\" target=\"_blank\"\u003eStandard Carbide Cutter Ci4 (diamond)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOptional carbide cutter sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci4-nr-negative-rake-carbide-cutter-diamond\" title=\"Easy Wood Tools Ci4 NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci4-NR\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAmerican Hickory Handle:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e 1\/2\" square x 8.5\" long\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 28.5\"\u003cbr\u003e\u003cstrong\u003eMax Reach:\u003c\/strong\u003e 4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci4 (diamond)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JCZcb0e4rSE\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":21869651361910,"sku":"3700","price":146.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/3700.jpg?v=1634667247"},{"product_id":"mid-size-easy-hollower-carbide-turning-tools","title":"Easy Wood Tools Mid-Size Easy Hollower #1","description":"\u003cp\u003eThe Mid-Size Easy Hollower #1 is straight and thin enabling you to get into small openings to start the hollowing process. It is designed to clean out and finish the majority of the inside of a bowl or hollow form. \u003cspan data-mce-fragment=\"1\"\u003eWhen the cutting action of the insert is no longer acceptable, simply rotate the insert 90° to expose a fresh, sharp edge. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement cutter: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci5-carbide-cutter-round\" title=\"Easy Wood Tools Ci5 Carbide Cutter product page\" target=\"_blank\"\u003e\u003cspan\u003eStandard Carbide Cutter Ci5 (round)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptional carbide cutter sold separately: \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/easy-wood-tools-ci5-nr-negative-rake-carbide-cutter-round\" title=\"Easy Wood Tools Ci5-NR Negative Rake Carbide Cutter product page\" target=\"_blank\"\u003eNegative Rake Carbide Cutter Ci5-NR\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike traditional steel, EWT carbide-tipped tools are always held flat on the rest and parallel to the floor - no bevels or vertical angles to worry about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort learning curve:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial carbide:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEWT manufactures carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sharpening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe square tool bar design and resultant turning geometry means fewer catches and kick-backs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnique Handle Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandmade in America:\u003c\/strong\u003e EWT use time-tested techniques and American-sourced woods, metal, and carbide to make high quality tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e\u003cspan\u003e 21-1\/2\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eMaple Handle:\u003c\/strong\u003e\u003cspan\u003e 14\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eTool Bar:\u003c\/strong\u003e\u003cspan\u003e 1\/2\" square x 8-1\/2\" long\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStandard Carbide Cutter Ci5 (round)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHex key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/bNqfNJ8Yhxo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448464,"sku":"6601","price":150.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/6601.jpg?v=1634670043"},{"product_id":"easy-tool-level","title":"Easy Wood Tools Easy Level","description":"\u003cp\u003eKeep your Easy Turning Tools level and flat with the Easy Level™! It's a small removable guide that helps you make sure your Easy Wood Tools® are in the best position for great cuts. Simply attach with two sided tape or a rubber band.\u003c\/p\u003e","brand":"Easy Wood Tools","offers":[{"title":"Default Title","offer_id":1230448680,"sku":"8202","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/8202-1.jpg?v=1681928340"},{"product_id":"honing-compound-1","title":"Veritas Honing Compound","description":"\u003cp\u003eThis honing compound is a blend of both chromium and aluminum oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.\u003c\/p\u003e\n\u003cp\u003eCuts quickly but leaves a mirror finish with a light wax film. The average size of scratch pattern it leaves behind is 0.5 microns or 0.00002 inches.\u003c\/p\u003e\n\u003cp\u003eIdeal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Used with a felt wheel or leather belt for power honing or with a leather strop for hand honing.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlend of chromium and aluminum oxide to give best combination of cutting speed and fine finish\u003c\/li\u003e\n\u003cli\u003eBonding formulated for ease of charging\u003c\/li\u003e\n\u003cli\u003eLeaves behind average size scratch pattern of 0.5 microns or .00002\"\u003c\/li\u003e\n\u003cli\u003eCan be used for final honing of almost any tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 6 oz\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21338331971702,"sku":"05M0801","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M0801-1_77d5bdb6-4798-4ee8-a348-5166877604e5.jpg?v=1680640641"},{"product_id":"imperial-std-marking-gauge-1","title":"Veritas Standard Wheel Marking Gauge","description":"\u003cp\u003eThere are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter, and the pin tends to follow the wood grain, throwing off your line. The Veritas wheel marking gauges solve both problems.\u003c\/p\u003e\n\u003cp\u003eThe hardened steel wheel cutter scribes perfectly at any point of its circumference. Since it cuts wood fibers rather than tears, it marks cleanly, even on cross grain. The wheel's single-sided bevel provides accuracy by pulling the gauge face against the stock. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortise depth.\u003c\/p\u003e\n\u003cp\u003eThe wheel retracts into the face of the gauge for storage and protection. The gauges are very easy to set thanks to the internal O-ring to keep light but constant friction on the rod.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel wheel with single-sided bevel pulls gauge face against stock, maintaining accuracy\u003c\/li\u003e\n\u003cli\u003eCuts wood fibers - does not tear\u003c\/li\u003e\n\u003cli\u003eMarks cleanly, even on cross grain\u003c\/li\u003e\n\u003cli\u003eThe wheel retracts into the face of the gauge for storage and protection\u003c\/li\u003e\n\u003cli\u003eThe gauges are very easy to set\u003c\/li\u003e\n\u003cli\u003eUse as a depth gauge to transfer measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a replacement wheel? Find it \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/replacement-wheel-for-std-marking-gauge-1\" target=\"_blank\" title=\"Veritas® Replacement Wheel for Std. Marking Gauge product page\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21337625231478,"sku":"05N3321","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05N3321-1.jpg?v=1670017770"},{"product_id":"narex-premium-bench-chisels","title":"Narex Premium Bench Chisels","description":"\u003cp\u003eInnovated chisel with improved cross-section of the blade that minimizes friction when cutting into wood. Improved grinding of the edges creates especially thin sides which are needed in dovetailing.\u003c\/p\u003e\n\u003cp\u003eErgonomic handle from hard and hefty hornbeam wood is strong enough to withstand heavy mallet blows. Combination of the stained hornbeam handle, brass ferrule and improved grinding of the blade creates a unique design of the tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlade:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged from highly alloyed Cr-Mn steel\u003c\/li\u003e\n\u003cli\u003eHeat treated up to 59 HRc\u003c\/li\u003e\n\u003cli\u003eFully ground and sharpened\u003c\/li\u003e\n\u003cli\u003eThin sides for sidewall clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHandle:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic with round cross-section\u003c\/li\u003e\n\u003cli\u003eStained hornbeam wood\u003c\/li\u003e\n\u003cli\u003eBrass ferrule\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Narex","offers":[{"title":"16mm","offer_id":21874597298294,"sku":"811616","price":22.99,"currency_code":"USD","in_stock":false},{"title":"26mm","offer_id":21874597265526,"sku":"811626","price":24.99,"currency_code":"USD","in_stock":true},{"title":"40mm","offer_id":21874597232758,"sku":"811640","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Premium_Bench_Chisel_16mm.jpg?v=1649186355"},{"product_id":"inside-caliper-100mm","title":"Inside Caliper 100mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322693,"sku":"850-1100","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1100.jpg?v=1649262144"},{"product_id":"inside-caliper-200mm","title":"Inside Caliper 200mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322757,"sku":"850-1120","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1120.jpg?v=1649262159"},{"product_id":"festool-clamping-elements-for-the-mft-2-pack","title":"Festool Clamping Elements for the MFT (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eThe ultimate complement to the Festool MFT system, the Festool Clamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application. Cam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape. The low profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT, freeing your work surface from obstruction. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for a perfect fit with the 20 mm holes of the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Tables\" rel=\"noopener noreferrer\"\u003eFestool MFT Multifunction Table\u003c\/a\u003e. Includes 2 Clamping Elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for a perfect fit with the 20mm holes of the Festool MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor safe and precise securing of the workpiece (sawing, sanding, routing, drilling, etc.)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Clamping Elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046405,"sku":"488030","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/488030-1.jpg?v=1754021860"},{"product_id":"festool-screw-clamps-120-mm-2-pack","title":"Festool Screw Clamps - 120mm (2 Pack)","description":"\u003cp\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Includes 2 clamps.\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-300mm-2-pack\" title=\"Festool Screw Clamps - 300mm (2-pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e11-13\/16\" (300 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 4-11\/16\" (120 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 4-11\/16\" (120mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046597,"sku":"489570","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489570-1.jpg?v=1754021858"},{"product_id":"festool-screw-clamps-300mm-2-pack","title":"Festool Screw Clamps - 300mm (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned to work seamlessly with holes and channels on the Festool \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" title=\"All Festool MFT tables\" target=\"_blank\"\u003eMFT Multifunction Table\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e and can be inserted into bottom t-slot of Festool \u003c\/span\u003e\u003ca title=\"Festool FS Guide Rails product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e\u003cspan\u003e for limitless positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-120-mm-2-pack\" target=\"_blank\" title=\"Festool Screw Clamps - 120mm (2-pack) product page\" rel=\"noopener\"\u003e4-11\/16\" (120 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 11-13\/16\" (300 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 11-13\/16\" (300mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cdiv class=\"productheader\"\u003e\u003ciframe width=\"420\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"productheader\"\u003e[\/TABS]\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047237,"sku":"489571","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489571-1.jpg?v=1754021857"},{"product_id":"fs-rapid-clamp-w-fixed-jaw-fs","title":"Festool FS-Rapid Clamp FS-RAPID\/R","description":"\u003cp\u003eDesigned for rapid positioning and clamping on \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFestool FS Guide Rails\u003c\/a\u003e. The FS-Rapid Clamp is particularly useful for fast and reliable clamping and securing FS Guide Rails to sheet good materials. Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge.\u003c\/p\u003e\n\u003cp\u003eIncludes clamping jaws and fixed jaws.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for rapid positioning and clamping of Festool FS Guide Rails to all types of sheet good material\u003c\/li\u003e\n\u003cli\u003eMounts to guide rails using the continuous bottom t-slot for limitless adjustability\u003c\/li\u003e\n\u003cli\u003eOne-handed trigger action enables quick set up on material edge\u003c\/li\u003e\n\u003cli\u003eFor clamping and positioning guide rails FS, FS\/2, and GRP\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamping jaws\u003c\/li\u003e\n\u003cli\u003eFixed jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rUUR4Mu7kCc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047301,"sku":"489790","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489790-3.jpg?v=1754021856"},{"product_id":"festool-quick-clamp-fs-hz-160","title":"Festool Quick Clamp FS-HZ 160","description":"\u003cp\u003eThe Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Clamping thickness 6-1\/4\" (160mm). Includes 1 clamp.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecures your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/li\u003e\n\u003cli\u003eRatcheting mechanism enables easy locking and quick release for a a more efficient workflow\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 6-1\/4\" (160mm)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/inLS-BDD8ls?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047749,"sku":"491594","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/491594-3.jpg?v=1754021853"},{"product_id":"abr-systainer-sys-stf-d125-tl-replaces-489463","title":"Festool Abrasive Systainer SYS-STF D125 TL","description":"\u003cp\u003eStores any abrasive in a dedicated space, clearly organized, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Sanding Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAchieve ideal results: Efficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003eConvenient and safe: abrasives can be organized into five compartments. Clearly arranged storage of used and reusable abrasives\u003c\/li\u003e\n\u003cli\u003eSystem gets it done: Compatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15.6\" x 11.7\" x 4.4\" (396 x 296 x 112 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114062789,"sku":"576781","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576781-1.jpg?v=1754021820"},{"product_id":"abr-systainer-sys-stf-d90-tl-replaces-497482","title":"Festool Abrasive Systainer³ SYS-STF-D77\/D90\/93V","description":"\u003cp\u003eThis Systainer stores any abrasive in a dedicated space, clearly organized, efficiently protected against moisture, and always at hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, and connect with just a single turn. With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other Systainers beforehand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-sanding-discs\" target=\"_blank\" title=\"All Abrasive Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEfficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003eAbrasives can be organized into 8 compartments\u003c\/li\u003e\n\u003cli\u003eCompatible with and can be connected to all Systainer generations, mobile dust extractors, and many other system accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W): \u003c\/strong\u003e15.6\" x 11.7\"\u003cbr\u003e\u003cstrong\u003eNumber of compartments:\u003c\/strong\u003e 8\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!----\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114062917,"sku":"576784","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576784main.jpg?v=1754021819"},{"product_id":"abr-systainer-sys-stf-d150-tl-replaces-487431","title":"Festool Abrasive Systainer SYS-STF D150","description":"\u003cp\u003eStores any abrasive in a dedicated space, clearly organised, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand.\u003c\/p\u003e\n\u003cp\u003eWith insert for abrasives dia. 6\" (150 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-sanding-discs\/brand_festool\" target=\"_blank\" title=\"All Festool Sanding Discs\" rel=\"noopener\"\u003eAbrasives\u003c\/a\u003e\u003ca title=\"All Festool Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-discs-attachments-menu\/brand_festool\" target=\"_blank\"\u003e\u003c\/a\u003e sold separately.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAchieve ideal results more quickly: \u003c\/strong\u003eEfficient, structured work enables abrasives to be changed even faster and minimizes abrasive consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient and safe: \u003c\/strong\u003eThe abrasives can be organized into 10 compartments. Clearly arranged storage of used and reusable abrasives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystems get it done: \u003c\/strong\u003eCompatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-round protection: \u003c\/strong\u003eEverything is effectively protected against dust, water spray or changes in temperature in the Systainer³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional appearance: \u003c\/strong\u003eFrom the workshop right through to the construction site – always perfectly organized. This will also impress your customers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15.6\" x 11.7\" x 9.3\" (396 x 296 x 237 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114063109,"sku":"576785","price":81.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576785-3.jpg?v=1754021818"},{"product_id":"compact-cleaning-set-t-loc-replaces-456736","title":"Festool Standard Cleaning Set RS-ST D 27\/36-Plus","description":"\u003cp\u003eThis Festool cleaning set goes perfectly with a Festool CT dust extractor and comes in its own Systainer for convenient storage. It is a compact, durable, convenient and lightweight set that is easy to transport as well as being ideal for quick cleanup on jobsites and in workshops. Perfect for all cleaning tasks in narrow spaces, on surfaces and on the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurved hand tube D 36 HR-K AS\u003c\/li\u003e\n\u003cli\u003eStandard floor nozzle\u003c\/li\u003e\n\u003cli\u003eExtension pipes D 36 VR-K AS\u003c\/li\u003e\n\u003cli\u003eCrevice nozzle, D 36 FD-300\u003c\/li\u003e\n\u003cli\u003eSuction brush\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 137\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114063301,"sku":"577257","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/577257.jpg?v=1754021817"},{"product_id":"sys-storage-box-sys-sb","title":"Festool SYS-Storage Box SYS-SB","description":"\u003cp\u003eDon’t go fishing for what you need with the Festool SYS-SB Storage Box. Tackle all your small part needs keeping everything organized and easily accessible. No more guessing where things are thanks to the clear cover panels that help keep everything in its place. Easy to grab and go with the large bale-style handle and full Systainer system integration, the Storage Box helps you take care of the minor details so you can focus on the task at hand.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe horizontal folding layout helps to prevent small pieces from migrating inside even if you drop it\u003c\/li\u003e\n\u003cli\u003eFour compartments and five included containers adapt to your organization needs\u003c\/li\u003e\n\u003cli\u003eSee-through, flush-mounted cover panels facilitate quick searches while keeping everything in its place no matter where you go\u003c\/li\u003e\n\u003cli\u003eEquipped with a large, bale-style handle, the SYS-Storage unit is easy to grab and go, either bare-handed or with gloves\u003c\/li\u003e\n\u003cli\u003eIntegrates fully with all SystainerS, SORTAINERS, and Tool Boxes\u003c\/li\u003e\n\u003cli\u003eLarge, easy-to-grasp bale-style handle – ergonomics for improved transport, bare-handed or with gloves\u003c\/li\u003e\n\u003cli\u003eHorizontal orientation keeps everything in its place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.51 lbs. (2.5 kg)\u003cbr\u003e\u003cstrong\u003eHeight including handle:\u003c\/strong\u003e 9-1\/2\" (240 mm)\u003cbr\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 15-1\/2\" (396 mm) x 11-1\/2\" (296 mm) x 6-1\/2\" (167 mm)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"420\" src=\"\/\/www.youtube.com\/embed\/c5rkE63gS6A?rel=0\" height=\"315\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114067781,"sku":"499901","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/499901-2.jpg?v=1754021812"},{"product_id":"festool-fs-guide-rails-32-75in","title":"Festool FS Guide Rails 32\" - 75\" (800 - 1,900mm)","description":"\u003cp\u003eAll Festool Track Saws deliver even more accuracy when coupled with an FS Guide Rail. The saw easily glides over the slideway lining of the guide rail, with little force and without slipping. The integrated splinter guard at the scribe mark aligns perfectly to your cut line and protects against tear out\/splintering — on cuts both with the grain AND across!\u003c\/p\u003e\n\u003cp\u003eFestool Guide Rails are constructed with an extruded aluminum profile, making them lightweight yet sturdy. The aluminum makes them corrosion-resistant and built to last. Guide rails are equipped with a foamed rubber backing layer to prevent them from sliding back and forth on the workpiece or scratching its surface.\u003c\/p\u003e\n\u003cp\u003eFS Guide Rails are available in set lengths between 32” - 118” (800 - 3,000mm), providing the perfect rail for any application. 32\" and 42\" rails are great for smaller panels. The 55\" is common for most types of cuts including crosscuts, while the 75\" is ideal for ripping plywood. \u003ca rel=\"noopener\" title=\"Festool Splinter Guards FS-SP product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/splinterguard-clear-1400-55-fits-55-guide-rails-replaces-483164\" target=\"_blank\"\u003eSplinter guards\u003c\/a\u003e are available for preventing tear out and providing precise alignment.\u003c\/p\u003e\n\u003cp\u003eIf you’re wanting to achieve a cutting length different from the set lengths that the rails come in, you can easily connect FS Guide Rails with the optional \u003ca rel=\"noopener\" title=\"Festool FSV\/2 Guide Rail Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-fsv-2-guide-rail-connector\" target=\"_blank\"\u003eFSV\/2 Guide Rail Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFS Guide Rails also accept Festool Routers and Jig Saws with applicable Guide Stop accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rail-base-for-carvex-jigsaw-adt-ps-420\" title=\"Festool Guide Rail Base For CARVEX Jigsaw ADT-PS 420\" rel=\"noopener\" target=\"_blank\"\u003eCARVEX Jig Saw Guide Rail Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rail-adapter-for-of-1010-router\" title=\"Festool Guide Rail Adapter for OF 1010 Router product page\" rel=\"noopener\" target=\"_blank\"\u003eOF 1010 Router Guide Rail Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Festool Guide Rail Adapter for OF 1400 Router product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-stop-for-of-1400-router\" target=\"_blank\"\u003eOF 1400 Router Guide Rail Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-stop-of-2200\" target=\"_blank\" title=\"Festool Guide Rail Adapter for OF 2200 Router product page\" rel=\"noopener\"\u003eOF 2200 Router Guide Rail Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated splinter guard serves as a cut line and prevents tear-out or splintering\u003c\/li\u003e\n\u003cli\u003eFully integrated system — use with Festool Routers (with necessary attachments)\u003c\/li\u003e\n\u003cli\u003eNon-skid, dual-clamping rubber strips prevent movement during cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"32\" (800 mm)","offer_id":43554185806041,"sku":"491499","price":95.0,"currency_code":"USD","in_stock":true},{"title":"42\" (1080 mm)","offer_id":43554185838809,"sku":"491504","price":125.0,"currency_code":"USD","in_stock":true},{"title":"55\" (1400 mm)","offer_id":43554185871577,"sku":"491498","price":149.0,"currency_code":"USD","in_stock":true},{"title":"75\" (1900 mm)","offer_id":43554185904345,"sku":"491503","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/491498-6.jpg?v=1754021776"},{"product_id":"titebond-genuine-hide-glue","title":"Titebond Genuine Hide Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond Genuine Hide Glue is the first hide glue to be offered in a liquid, ready-to-use form. It requires no mixing, heating or stirring. Professional woodworkers use Titebond Genuine Hide for its long assembly time, exceptional strength and unique crackling effect on wood. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond Genuine Hide provides superior creep-resistance, offers excellent sand-ability, and is unaffected by finishes. Its sensitivity to moisture allows for easy disassembly of parts, a critical benefit in furniture restoration or the repair of musical instruments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 50° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time: \u003c\/strong\u003e10 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-30 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"8oz","offer_id":46642769821913,"sku":"5013","price":7.99,"currency_code":"USD","in_stock":true},{"title":"16oz","offer_id":46642769854681,"sku":"5014","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/genuinehidemain.jpg?v=1750086021"},{"product_id":"bessey-ezs-one-handed-clamps","title":"Bessey EZS One-Handed Clamps","description":"\u003cp\u003eThe EZS One-Handed Clamps by Bessey offers a revitalized approach to the one hand clamp market. These lightweight and comfortable clamps are capable of exerting up to 445 lbs. of spreading or clamping force. This ergonomically shaped clamp can be easily reconfigured from clamping to spreading without tools. \u003c\/p\u003e\n\u003cp\u003eEZS Clamps feature an intelligent release mechanism where the upper section can quickly convert from clamping to spreading without tools. While all other clamps measure throat depth to the center of the pad, EZ and EZS extend throat depth right to the outside edge of the pads – power spread across the entire pad.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIntelligent release mechanism allows upper section to quickly convert from clamping to spreading without tools\u003c\/li\u003e\n\u003cli\u003eErgonomic handle positioned behind the rail, enabling a powerful grip\u003c\/li\u003e\n\u003cli\u003eSoft pressure caps optimize material protection and secure clamping\u003c\/li\u003e\n\u003cli\u003eThroat depth to the very edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 445 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/VW0UU6DjVRs?si=UVBkI4uouNDPg6wB\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875939180662,"sku":"EZS15-8","price":21.2,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875939115126,"sku":"EZS30-8","price":22.31,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875939049590,"sku":"EZS45-8","price":32.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875939016822,"sku":"EZS60-8","price":25.83,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125342661,"sku":"EZS90-8","price":35.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/EZ21508.jpg?v=1613407863"},{"product_id":"bessey-clutch-style-f-clamps","title":"Bessey Clutch Style F-Clamps with 2K Handle","description":"\u003cp\u003eBessey Clutch Style Clamps are a popular, regular duty clamp that can be used for a wide range of projects. These clamps are easy to use and adjustable thanks to the 2 piece slip clutch design. This allows you to set the clamp at a certain width and it will stay in place, not matter what position the clamp is in. These easy-to-use clamps are suitable for \"close quarters\" clamping with the 2K comfort handle.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic 2K handle\u003c\/li\u003e\n\u003cli\u003ePowder coated, ductile cast iron jaws\u003c\/li\u003e\n\u003cli\u003eNickel plated, drawn serrated rail\u003c\/li\u003e\n\u003cli\u003eNon-marring pads on the top and bottom jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 1,100 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5nuOLjj7Oog?si=ELPFxzoznF_Rxu1R\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875941310582,"sku":"GSCC3.506+2K","price":15.68,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875941245046,"sku":"GSCC3.512+2K","price":16.97,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875941179510,"sku":"GSCC3.518+2K","price":18.36,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875941081206,"sku":"GSCC3.524+2K","price":20.4,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125343173,"sku":"GSCC3.536+2K","price":22.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Fstyle-1.jpg?v=1734634610"},{"product_id":"bessey-auto-adjust-toggle-clamps-inline","title":"Bessey Auto-Adjust Toggle Clamps - Inline","description":"\u003cp\u003eBessey auto-adjust toggle clamps have a wide range of height and force in one clamp. These clamps will automatically adjust to the thickness of your work piece, while applying the same amount of pressure. The pressure the clamp exerts can be easily changed from 25 to 550 pounds by adjusting the thumb screw.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-Adjusts to variations in work piece width up to 0-16 mm (approx 5\/8 IN)\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure screw allows clamping force adjustment\u003c\/li\u003e\n\u003cli\u003eLarge ergonomic handle\u003c\/li\u003e\n\u003cli\u003eHigh quality construction\u003c\/li\u003e\n\u003cli\u003eBase construction is optimized for 1\/4 IN (M6) fasteners\u003c\/li\u003e\n\u003cli\u003ePlunger has an M8 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"3\/8\"","offer_id":44650841309401,"sku":"STC-IHH15","price":24.33,"currency_code":"USD","in_stock":false},{"title":"5\/8\"","offer_id":44650841342169,"sku":"STC-IHH25","price":24.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/stc-ihhmain.jpg?v=1708118009"},{"product_id":"bessey-variable-angle-strap-clamp","title":"Bessey Variable Angle Strap Clamp","description":"\u003cp\u003eClamping large or odd shapes with straps is not new; however, most strap clamps exert force (pull) in only one direction, which can easily distort\/skew the work piece. Bessey's VAS-23 is different — it pulls equally on both ends of the strap, eliminating the chance of skewing your work piece. The high tensile woven polyester strap is extremely strong with a built-in take up reel that neatly stores the excess strap, eliminating a potential tripping hazard.\u003c\/p\u003e\n\u003cp\u003ePerfect for clamping square, rectangular, or irregular shapes. Comes with 4 pivoting Vario corner clips, which adjust to pressure.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap is drawn in on both sides:\u003c\/strong\u003e The strap draws simultaneously from both sides ensuring pressure is applied equally on all corners without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated coiling mechanism:\u003c\/strong\u003e Integrated rewind mechanism is operated with a crank handle which eliminates tangling and damage to the strap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical Vario corners:\u003c\/strong\u003e  Vario clip corners with twin-tilting pressure pads auto-adjust from 60° to 180° for easy assembly of most multi-angle projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtremely resistant:\u003c\/strong\u003e The special woven polyester band provides high resistance to tearing, and a clamping range of 23 ft. The steel wire loop opens quickly and simply to adjust or release glue-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBessey comfort handle:\u003c\/strong\u003e The 2K composite handle with comfort insert comes standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 23 ft.\u003cbr\u003e\u003cstrong\u003eRange of angle:\u003c\/strong\u003e 60° - 180°\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/oedSg1EHd4M?si=3TDE5S8j5PzyNQqv\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":19125344389,"sku":"VAS-23+2K-CB","price":27.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Strap-Clamp.jpg?v=1643379579"},{"product_id":"cmt-digital-angle-gauge","title":"CMT Digital Angle Gauge","description":"\u003cp\u003eThe digital angle gauge is a mini waterproof digital protractor that provides digital readings between ±180° with a resolution of 0,1° and auto shut off after 5 minutes. It is small enough to be carried around in a pocket and the LED screen is convenient to read. It incorporates magnets in the base for adhesion to any ferrous surface to accurately measure miter and bevel angles on miter saws, saw benches, etc.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBattery voltage\/type:\u003c\/strong\u003e 3V\/L lithium.\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 60x60x28mm (2-3\/8\" x 2-3\/8\" x 1-1\/8\").\u003cbr\u003e\u003cstrong\u003eRange:\u003c\/strong\u003e ±180°.\u003cbr\u003e\u003cstrong\u003eResolution:\u003c\/strong\u003e 0.1°\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":19220058117,"sku":"DAG-001","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/DAG-001-1.jpg?v=1652287590"},{"product_id":"festool-ct-wings-extra-hand","title":"Festool CT Wings Extra Hand","description":"\u003cp\u003eFor \u003ca title=\"All Festool Dust Extractors\" href=\"https:\/\/www.oaktreesupply.com\/collections\/dust-extractors-menu\/brand_festool\" target=\"_blank\"\u003eCT mobile Dust Extractors\u003c\/a\u003e and D 27 Suction Hoses.\u003c\/p\u003e\n\u003cp\u003eUtilizing suction from a CT Dust Extractor, the CT Wings provide an additional support for mounting long items to a wall like molding, or holding a straight-edge or level in place for layout marks. With 16 adjustable \"wings\", CT Wings adjust and conform to molding and other stock quickly while providing a tacky grip surface to minimize movement. A bypass-valve allows for quick and easy release and reset without going back to the extractor.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eActs as an extra hand to hold materials, a level or straight edge in place\u003c\/li\u003e\n\u003cli\u003eWings can be adjusted for various thicknesses up to two inches\u003c\/li\u003e\n\u003cli\u003eAttaches to standard dust extractor hose\u003c\/li\u003e\n\u003cli\u003eSupports up to 6.6 pounds of weight\u003c\/li\u003e\n\u003cli\u003eFlexible aid for temporary clamping and fixing of workpieces at horizontal and vertical areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5\" x 3-1\/8\" x 2\" (130 x 80 x 50mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.77 lbs. (0.35 kg)\u003cbr\u003e\u003cstrong\u003eMax. clamping height:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2\" (50 mm)\u003cbr\u003e\u003cstrong\u003eMax. load:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6.61 lbs. (3.00 kg)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/F4f5myXkD9s\" width=\"450\" height=\"253\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":25463086985,"sku":"500312","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/500312-6.jpg?v=1754021748"},{"product_id":"kreg-bench-dogs","title":"Kreg Bench Dogs","description":"\u003cp\u003eThese simple 3\/4\" reinforced nylon Bench Dogs will help make your next project easier. Included with each Bench Dog is a solid rubber Bench Brake that can be placed on top of the Bench Dog for a solid, non-slip work surface.\u003c\/p\u003e\n\u003cp\u003ePerfect for routing and sanding.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSquared clamping pad for secure hold\u003c\/li\u003e\n\u003cli\u003eGreat for routing, cutting, and sanding\u003c\/li\u003e\n\u003cli\u003ePlace in Bench Dog or directly in bench\u003c\/li\u003e\n\u003cli\u003eFits standard 3\/4\" (19 mm) Bench Dog hole\u003c\/li\u003e\n\u003cli\u003eBench Brakes press in place for solid, non-slip work surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(4) Bench Dogs with Bench Brakes\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yNvfWkzVyHU\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":28451634825,"sku":"KKS1070","price":12.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KKS1070-1.jpg?v=1669912352"},{"product_id":"cmt-formula-2050-blade-and-bit-cleaner-18-oz","title":"CMT Formula 2050 Blade and Bit Cleaner - 18 oz.","description":"\u003cp\u003eCMT Formula 2050 keeps your blades, bits, and cutters clean and rust-free. Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between carbide and steel surfaces, and the resin itself, making it extremely effective. It can be applied with a spray bottle or used in cleaning preparations for ultrasonic washers (122°F, 15 minutes) or immersion tanks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves resin, pitch, and adhesive residue from all woodworking cutting tools (saw blades, router bits, drill bits, shaper cutters, etc.)\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray bottle or used in ultrasonic cleaners and dip tanks.\u003c\/li\u003e\n\u003cli\u003eAvailable in 18 oz. bottle or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/cmt-formula-2050-blade-and-bit-cleaner-1-gallon\" target=\"_blank\" title=\"CMT Formula 2050 Blade and Bit Cleaner - 1 Gallon product page\" rel=\"noopener\"\u003e1 gallon container\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":43881304585,"sku":"998.001.01","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/998.001.01-1.jpg?v=1668717651"},{"product_id":"kreg-cabinet-hardware-jig","title":"Kreg Cabinet Hardware Jig","description":"\u003cp\u003eThe Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new construction and for refreshing entire rooms.\u003c\/p\u003e\n\u003cp\u003eWhether you're updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps —​ and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you'll know that every piece of hardware is positioned correctly and consistently.\u003c\/p\u003e\n\u003cp\u003eThe Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.\u003c\/p\u003e\n\u003cp\u003eThe Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3\/16\", bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 3\/16\" (5 mm) required drill bit is not included. Check out our selection of drill bits \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drill-bits-menu\" target=\"_blank\" title=\"All Drill Bits\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable guides for accurate hole placement\u003c\/li\u003e\n\u003cli\u003eBuilt-in measuring scales for repeatable results\u003c\/li\u003e\n\u003cli\u003eVersatile for mounting single and multi-hole knobs\u003c\/li\u003e\n\u003cli\u003eAdjustable edge guide for easy positioning\u003c\/li\u003e\n\u003cli\u003eStrong, lightweight materials for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable hardened-steel drill guides\u003c\/li\u003e\n\u003cli\u003e1\" to 5\" (25mm-127mm) edge guide to hole-center spacing\u003c\/li\u003e\n\u003cli\u003e2 1\/2\", 3\", 3 1\/2\", 4\", 4 1\/2\", 5\" and 64mm, 96mm, 128mm drill guide spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Jig base\u003c\/li\u003e\n\u003cli\u003e(1) Edge guide\u003c\/li\u003e\n\u003cli\u003e(2) Drill guides with knurled nuts\u003c\/li\u003e\n\u003cli\u003e(2) Non-slip pads\u003c\/li\u003e\n\u003cli\u003e(2) T-knobs and bolts\u003c\/li\u003e\n\u003cli\u003e(1) Owner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kbpw20MDhAc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":45491772553,"sku":"KHI-PULL","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHI-PULL-1.jpg?v=1671113024"},{"product_id":"narex-mortising-chisels","title":"Narex Mortising Chisels","description":"\u003cp\u003eA robust tool used for chopping out joints as well as cutting mortises. Excellent cutting performance is reached by sides tapering in height and lengthwise from tip to shoulder for sidewall clearance. Forged blade is made of traditional Cr-Mn steel and is heat treated to 59 HRc. Ergonomic handle from beech wood enables firm grip and is strong enough to withstand heavy blows with a mallet.\u003c\/p\u003e","brand":"Narex","offers":[{"title":"10mm","offer_id":21918852874358,"sku":"811210","price":25.99,"currency_code":"USD","in_stock":true},{"title":"12mm","offer_id":44767632326873,"sku":"811212","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Mortise_chisel_-_10.jpg?v=1698871985"},{"product_id":"west-systems-105-epoxy-resin","title":"West System 105 Epoxy Resin","description":"\u003cp\u003e105 Epoxy Resin is the base material on which all West System 105 epoxy compounds are built. It is a clear, pale yellow, low-viscosity liquid epoxy resin. This liquid epoxy resin cures to a hard, solid plastic with superior physical properties. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.\u003c\/p\u003e\n\u003cp\u003eWEST SYSTEM Epoxy’s cure times are based on an ambient temperature of 72°F. In warmer temperatures, epoxy cures faster. A good rule of thumb for gauging cure speed is that for every 18°F increase above 72°F, the working time and pot life will be cut in half. To maximize the working time of the epoxy, consider how much time you need and what temperature you’ll be working at, then select the hardener accordingly. For warmer temperatures, we recommend the \u003ca title=\"West System 206 Slow Hardener product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-systems-205-slow-hardner\" target=\"_blank\"\u003e206 Slow Hardener\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-system-209-extra-slow-hardener\" title=\"West System 209 Extra Slow Hardener product page\" target=\"_blank\"\u003e209 Extra Slow Hardener\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBest for use in small pours to fill cracks and voids or thin coatings on bar tops or other wood projects\u003c\/li\u003e\n\u003cli\u003eFor smaller pours, do not pour more than 0.5\" per layer. For larger pours, do not pour more than 0.25\" per layer\u003c\/li\u003e\n\u003cli\u003eCan be layered with multiple pours to build up thickness\u003c\/li\u003e\n\u003cli\u003eSuitable for outdoor applications\u003c\/li\u003e\n\u003cli\u003eCan be used to keep cracks from expanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003cbr\u003e\u003c\/strong\u003e105 Epoxy Resin is designed to wet out and bond with wood fiber, fiberglass, and reinforcing fabrics. Modifying this epoxy with West System \u003ca title=\"West System 404 High Density Filler product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-systems-404-high-density-filler\" target=\"_blank\"\u003e404 High Density Filler\u003c\/a\u003e or \u003ca title=\"West System 410 Microlight Filler product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/west-systems-410-microlight-filler-5oz\" target=\"_blank\"\u003e410 Microlight Filler\u003c\/a\u003e creates an excellent structural adhesive or fairing compound. Epoxy thickened with adhesive (high-density) fillers makes structural bonds, bridges gaps, and fills voids. Epoxy thickened with fairing (low-density) fillers is easily sanded and shaped after it cures.\u003c\/p\u003e\n\u003cp\u003eThis epoxy is also a great coating material. Applied with a roller, it offers excellent thin-film characteristics. It will flow out and self-level without “fisheyeing.” By combining it with blush-free \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-systems-205-clear-hardner\" title=\"West System 207 Special Clear Hardener product page\" target=\"_blank\"\u003e207 Special Clear Hardener\u003c\/a\u003e, you can create a natural finish. You’ll just need to add a couple of coats of varnish for UV protection. This is a good alternative that builds mil thickness quickly, saving time and effort. The results are long-lasting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePairings\u003cbr\u003e\u003c\/strong\u003e105 Epoxy Resin\/\u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/west-systems-205-clear-hardner\"\u003e207 Special Clear Hardener\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003emixtures cure clear so you can achieve a natural finish when coating with varnish.\u003c\/p\u003e\n\u003cp\u003ePair 105 Epoxy with corresponding letter size of \u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/west-systems-205-fast-hardner\"\u003e205 Fast Hardener\u003c\/a\u003e,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/west-systems-205-slow-hardner\"\u003e206 Slow Hardener\u003c\/a\u003e, \u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/west-systems-205-clear-hardner\"\u003e207 Special Clear Hardener\u003c\/a\u003e or \u003ca title=\"West System 209 Extra Slow Hardener product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-system-209-extra-slow-hardener\" target=\"_blank\"\u003e209 Extra Slow Hardener\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGroup Size A Resin - use with Group Size A Hardeners\u003c\/p\u003e\n\u003cp\u003eGroup Size B Resin - use with Group Size B Hardeners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e\u003cspan\u003e Use \u003c\/span\u003e\u003ca title=\"West System 300 Mini Pumps product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-resin-accessories-menu\/products\/west-systems-metering-pumps-for-a-b-and-c-sizes\" target=\"_blank\"\u003e300 Mini Pumps\u003c\/a\u003e\u003cspan\u003e to always dispense correct ratio of resin and hardener. One full pump-stroke of resin for every one full pump stroke of hardener is all you need to remember.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior water resistance\u003c\/li\u003e\n\u003cli\u003eHigh strength\u003c\/li\u003e\n\u003cli\u003eFast or slow working times\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to wood, fiberglass, metals, foam, and reinforcing fabrics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/jw5emC8Ie7I\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"West Systems","offers":[{"title":"105-A (32 fl. oz.)","offer_id":45825337289,"sku":"105-A","price":59.51,"currency_code":"USD","in_stock":true},{"title":"105-B (126.6 fl. oz.)","offer_id":21955958177910,"sku":"105-B","price":131.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/105-A-1.jpg?v=1666724631"},{"product_id":"west-systems-205-clear-hardner","title":"West System 207 Special Clear Hardener","description":"\u003cp\u003eBlush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Blended with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/west-systems-105-epoxy-resin\"\u003e105 Epoxy Resin,\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. 105\/207 Epoxy has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarm Weather Bonding with 207 Special Clear Hardener\u003cbr\u003e\u003c\/strong\u003eWEST SYSTEM Epoxy’s cure times are based on an ambient temperature of 72°F. In warmer temperatures, epoxy cures faster. Here is what you need to know to ensure adequate working time when using epoxy in warm conditions:\u003c\/p\u003e\n\u003cp\u003eEpoxy cures by a chemical reaction between the resin and hardener that releases heat, called an exothermic reaction. The larger the volume of epoxy the more heat that is generated. Many epoxy users have seen pots of epoxy smoke and bubble due to uncontrolled exotherm. The good news is you can prevent this. A good rule of thumb for gauging cure speed is that for every 18°F increase above 72°F, the working time and pot life will be cut in half. To maximize the working time of the epoxy, consider how much time you need and what temperature you’ll be working at, then select the hardener accordingly. For hot temperatures, we recommend \u003ca title=\"West System 209 Extra Slow Hardener product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-system-209-extra-slow-hardener\" target=\"_blank\"\u003e209 Hardener\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWarming the resin and hardener to about 80°F before dispensing will lower the epoxy’s viscosity, enhancing 207 Special Clear Hardener’s good flow characteristics. Epoxy resin and hardener cans may be safely warmed in a water bath.\u003c\/p\u003e\n\u003cp\u003eConsider the temperature of your work area when deciding how deep to pour. At warmer ambient temperatures, the epoxy will cure faster and generate more heat. Again, limit the depth of each pour, especially when working in warm conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePouring\u003cbr\u003e\u003c\/strong\u003eLimit the depth of the pour to ¼”. If a thicker layer is desired, allow the lower layer to set up before adding a new layer. Casting epoxy too thickly in a single pour, or casting more epoxy over a layer that has not set up can cause uncontrolled exotherm. This will ruin your project and could possibly destroy pieces of memorabilia you’ve placed in the casting.\u003c\/p\u003e\n\u003cp\u003eGroup Size A Hardener - use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"West System 105-A Epoxy Resin product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-systems-105-epoxy-resin?variant=45825337289\" target=\"_blank\"\u003e105-A Resin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGroup Size B Hardener - use with\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"West System 105-B Epoxy Resin product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-menu\/products\/west-systems-105-epoxy-resin?variant=21955958177910\" target=\"_blank\"\u003e105-B Resin\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e\u003cspan\u003e Use \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-resin-accessories-menu\/products\/west-systems-metering-pumps-for-a-b-and-c-sizes\" title=\"West System 300 Mini Pumps product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/collections\/epoxy-resin-accessories-menu\/products\/west-systems-metering-pumps-for-a-b-and-c-sizes\" target=\"_blank\"\u003e300 Mini Pumps\u003c\/a\u003e\u003cspan\u003e to always dispense correct ratio of resin and hardener. One full pump-stroke of resin for every one full pump stroke of hardener is all you need to remember.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMix Ratio: \u003c\/strong\u003e3 parts resin : 1 part hardener\u003cbr\u003e\u003cstrong\u003ePot life at 72°F (22°C):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20 to 26 minutes*\u003cbr\u003e\u003cstrong\u003eCure to a solid state:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10 to 15 hours\u003cbr\u003e\u003cstrong\u003eCure to maximum strength:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4 to 7 days\u003cbr\u003e\u003cstrong\u003eMinimum recommended temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e60°F (16°C)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*The pot life refers to a confined mass of 100 grams of epoxy\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/jw5emC8Ie7I\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"West Systems","offers":[{"title":"207-SA (10.8 fl. oz.)","offer_id":45825343625,"sku":"207-SA","price":63.15,"currency_code":"USD","in_stock":true},{"title":"207-SB (42.2 fl. oz.)","offer_id":21955958571126,"sku":"207-SB","price":128.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/207-SA.jpg?v=1666893840"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/gifts-under-150\/brand_stabila.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}