{"title":"Gifts for Any Woodworker","description":"","products":[{"product_id":"kreg-rip-cut-circular-saw-edge-guide","title":"Kreg Rip-Cut Circular Saw Edge Guide","description":"\u003cp\u003eGreat projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide.\u003c\/p\u003e\n\u003cp\u003eThe Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut circular saw guide, you can cut with the confidence you want and the precision you need.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. All you have to do is lock the saw in at the measurement you want — up to 24\" — using the built-in measuring scale, and then make your cut.\u003c\/p\u003e\n\u003cp\u003eWith a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.\u003c\/p\u003e\n\u003cp\u003eThe Rip-Cut circular saw guide is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24\") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMake rip cuts and crosscuts on plywood and sheet goods up to 24\" wide\u003c\/li\u003e\n\u003cli\u003eCut multiple pieces to the same size with just one setup\u003c\/li\u003e\n\u003cli\u003eAdjustable lens cursor for calibration\u003c\/li\u003e\n\u003cli\u003eUse the oversize circular saw guide for precise control throughout the cut\u003c\/li\u003e\n\u003cli\u003eEliminate need for marking, measuring, and layout lines\u003c\/li\u003e\n\u003cli\u003eTake your saw to the material instead of having to take your material to the saw\u003c\/li\u003e\n\u003cli\u003eUniversal Sled accepts most circular saws — left or right blade\u003c\/li\u003e\n\u003cli\u003eReversible edge guide for left- or right-handed use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Universal Saw Sled\u003c\/li\u003e\n\u003cli\u003e(1) Aluminum Guide Rail\u003c\/li\u003e\n\u003cli\u003e(1) Precision Edge Guide\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FpCbU-zXFjM\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323240,"sku":"KMA2685","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMA2685-1.jpg?v=1671121377"},{"product_id":"kreg-90-right-angle-clamp","title":"Kreg 90° Right Angle Clamp","description":"\u003cp\u003eThe Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx auto-adjust technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1\/2\" plywood to thick 2x4 boards.\u003c\/p\u003e\n\u003cp\u003eThe steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.\u003c\/p\u003e\n\u003cp\u003eThe arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting. Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done. \u003c\/p\u003e\n\u003cp\u003eMany woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds pocket-hole joints at 90° during project assembly\u003c\/li\u003e\n\u003cli\u003eAutomaxx technology adjusts automatically to material thickness\u003c\/li\u003e\n\u003cli\u003eContoured grips for added comfort\u003c\/li\u003e\n\u003cli\u003ePin fits securely into pocket hole\u003c\/li\u003e\n\u003cli\u003eSwivel pad holds mating piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 3-1\/8\" (79 mm)\u003cbr\u003e\u003cstrong\u003eReach:\u003c\/strong\u003e 5\" (127 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with padded grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UkUGZSIHJQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323668,"sku":"KHCRA","price":46.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHCRA-1.jpg?v=1671132704"},{"product_id":"titebond-original-wood-glue","title":"Titebond Original Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sand-ability and is unaffected by finishes. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 50° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 4-6 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040827208,"sku":"5062","price":2.99,"currency_code":"USD","in_stock":true},{"title":"8 oz","offer_id":21919615549558,"sku":"5063","price":3.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21919615516790,"sku":"5064","price":5.99,"currency_code":"USD","in_stock":true},{"title":"32 oz","offer_id":21919615484022,"sku":"5065","price":7.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21919615451254,"sku":"5066","price":21.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767397081,"sku":"50609","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/originalmainimage.jpg?v=1750082510"},{"product_id":"titebond-ii-premium-wood-glue","title":"Titebond II Premium Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sand-ability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 55° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 3-5 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 10-15 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4 oz","offer_id":1040831920,"sku":"5002","price":3.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21970287624310,"sku":"5003","price":5.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":21970287591542,"sku":"5004","price":7.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21970287558774,"sku":"5005","price":10.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21970287526006,"sku":"5006","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642768052441,"sku":"50009","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIPremiummain.jpg?v=1750083305"},{"product_id":"titebond-iii-ultimate-wood-glue","title":"Titebond III Ultimate Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI\/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"4oz","offer_id":46642769166553,"sku":"1412","price":4.99,"currency_code":"USD","in_stock":true},{"title":"8oz","offer_id":21895268499574,"sku":"1413","price":6.99,"currency_code":"USD","in_stock":true},{"title":"16 oz","offer_id":1040840364,"sku":"1414","price":9.99,"currency_code":"USD","in_stock":true},{"title":"32oz","offer_id":21895268466806,"sku":"1415","price":16.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":21895268434038,"sku":"1416","price":38.99,"currency_code":"USD","in_stock":true},{"title":"2.15 Gallon PROJug","offer_id":46642767986905,"sku":"14109","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/IIIUltimatemain.jpg?v=1750085018"},{"product_id":"titebond-ii-extend-wood-glue","title":"Titebond II Extend Wood Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sand-ability and is unaffected by finishes.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 16 oz. or 1 gallon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePasses Type II Water-Resistance testing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHot press and R-F compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSlower speed of set - longer open time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent-resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent sand-ability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 47° F\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eOpen Assembly Time:\u003c\/strong\u003e 8-10 Minutes\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-25 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"16oz","offer_id":21970287100022,"sku":"4134","price":8.99,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":1040841872,"sku":"4136","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Titebond-II-Extend.jpg?v=1652472193"},{"product_id":"kreg-automaxx-face-clamp","title":"Kreg AUTOMAXX Face Clamp 3\"","description":"\u003cp\u003eWood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. These versatile wood clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2 x 4 and then a piece of 1\/2\" plywood without ever readjusting the wood clamp.\u003c\/p\u003e\n\u003cp\u003eEasily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the wood clamp maintains consistent clamping pressure with every thickness. \u003c\/p\u003e\n\u003cp\u003eWood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.\u003c\/p\u003e\n\u003cp\u003eAlso available as a \u003ca title='Kreg AUTOMAXX Face Clamp 6\" product page' href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-automaxx-face-clamp-6\" target=\"_blank\"\u003e6\" Clamp\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjusts automatically to match material thickness\u003c\/li\u003e\n\u003cli\u003eEasy-to-regulate pressure with a simple thumbscrew\u003c\/li\u003e\n\u003cli\u003eLarge clamp faces spread pressure evenly\u003c\/li\u003e\n\u003cli\u003eErgonomic padded grips prevent hand fatigue\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca title=\"Kreg Jig R3 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-jig-r3\" target=\"_blank\"\u003eKreg Pocket-Hole Jig R3\u003c\/a\u003e Clamp Pad Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 3\" (76 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with Molded Grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5WtWvQKBqXA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":21870291517558,"sku":"KHC3","price":36.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHC3-1.jpg?v=1675887664"},{"product_id":"grr-rip-block","title":"MicroJig GRR-RIP Block Smart Pushblock","description":"\u003cp\u003eTransform your woodworking experiences with the GRR-RIP Smart Pushblock, a revolutionary tool that delivers unparalleled control, safety, and precision. This exceptional block has earned the title of #1 Best-Overall Pushblock by Popular Mechanics, reflecting the expert validation and trust placed in its performance and design.\u003c\/p\u003e\n\u003cp\u003eThe GRR-RIP BLOCK Smart Pushblock boasts auto-retracting heel technology that hooks the tail-end of your board, ensuring smooth and consistent movement throughout the cutting process. The proprietary Green GRR-RIP provides extreme hold, allowing you to tackle various materials with confidence and ease.\u003c\/p\u003e\n\u003cp\u003eThis pushblock is designed for versatility, featuring a 90° flip guide that allows for vertical footing on band saws and router tables. No matter the complexity of your project, the GRR-RIP Pushblock adapts to your needs, delivering outstanding results every time.\u003c\/p\u003e\n\u003cp\u003eThe ergonomic handle of this pushblock is specifically designed to exert directional pressure against the fence, providing stability and control during operation. No more hand strain or fatigue!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-retracting heel technology and proprietary Green GRR-RIP ensure a smooth cutting process\u003c\/li\u003e\n\u003cli\u003e90° flip guide for vertical footing on band saws and router tables, and an ergonomic handle for superior stability and control\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":1158628840,"sku":"GB-1","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/GB-1-1.jpg?v=1680785311"},{"product_id":"honing-compound-1","title":"Veritas Honing Compound","description":"\u003cp\u003eThis honing compound is a blend of both chromium and aluminum oxide to give the best combination of cutting speed and fine finish. The bonding is formulated for ease of charging. It will adhere equally well to felt, leather or wood.\u003c\/p\u003e\n\u003cp\u003eCuts quickly but leaves a mirror finish with a light wax film. The average size of scratch pattern it leaves behind is 0.5 microns or 0.00002 inches.\u003c\/p\u003e\n\u003cp\u003eIdeal for carving tools and firmer gouges, it can be used for final honing of almost any tool. Used with a felt wheel or leather belt for power honing or with a leather strop for hand honing.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlend of chromium and aluminum oxide to give best combination of cutting speed and fine finish\u003c\/li\u003e\n\u003cli\u003eBonding formulated for ease of charging\u003c\/li\u003e\n\u003cli\u003eLeaves behind average size scratch pattern of 0.5 microns or .00002\"\u003c\/li\u003e\n\u003cli\u003eCan be used for final honing of almost any tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 6 oz\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Green\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21338331971702,"sku":"05M0801","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M0801-1_77d5bdb6-4798-4ee8-a348-5166877604e5.jpg?v=1680640641"},{"product_id":"imperial-std-marking-gauge-1","title":"Veritas Standard Wheel Marking Gauge","description":"\u003cp\u003eThere are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter, and the pin tends to follow the wood grain, throwing off your line. The Veritas wheel marking gauges solve both problems.\u003c\/p\u003e\n\u003cp\u003eThe hardened steel wheel cutter scribes perfectly at any point of its circumference. Since it cuts wood fibers rather than tears, it marks cleanly, even on cross grain. The wheel's single-sided bevel provides accuracy by pulling the gauge face against the stock. Its cutting edge is at the extreme end of the rod, useful for transferring dimensions such as tenon shoulder and mortise depth.\u003c\/p\u003e\n\u003cp\u003eThe wheel retracts into the face of the gauge for storage and protection. The gauges are very easy to set thanks to the internal O-ring to keep light but constant friction on the rod.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel wheel with single-sided bevel pulls gauge face against stock, maintaining accuracy\u003c\/li\u003e\n\u003cli\u003eCuts wood fibers - does not tear\u003c\/li\u003e\n\u003cli\u003eMarks cleanly, even on cross grain\u003c\/li\u003e\n\u003cli\u003eThe wheel retracts into the face of the gauge for storage and protection\u003c\/li\u003e\n\u003cli\u003eThe gauges are very easy to set\u003c\/li\u003e\n\u003cli\u003eUse as a depth gauge to transfer measurements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed a replacement wheel? Find it \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/replacement-wheel-for-std-marking-gauge-1\" target=\"_blank\" title=\"Veritas® Replacement Wheel for Std. Marking Gauge product page\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21337625231478,"sku":"05N3321","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05N3321-1.jpg?v=1670017770"},{"product_id":"kreg-precision-miter-gauge-system","title":"Kreg Precision Miter Gauge System","description":"\u003cp\u003eOne Miter Gauge with everything you need for accuracy.\u003c\/p\u003e\n\u003cp\u003eWhy spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? The Kreg Precision Miter Gauge System requires no calibrating, and it features positive stops at 0°, 10°, 22-1\/2°, 30°, and 45° to make it easy to cut accurate miters quickly.\u003c\/p\u003e\n\u003cp\u003eWhen you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1\/10th of a degree. Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.\u003c\/p\u003e\n\u003cp\u003eFits standard 3\/8\" (9.5mm) x 3\/4\" (19mm) miter slots\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFactory-calibrated; perfect right out of the box\u003c\/li\u003e\n\u003cli\u003ePositive stops at 0°, 10°, 22-1\/2°, 30°, and 45° \u003c\/li\u003e\n\u003cli\u003eBrass pin allows quick changes between positive stop angles\u003c\/li\u003e\n\u003cli\u003e24\" bar with 5 bar adjusters eliminates \"play\" between the bar and miter slot\u003c\/li\u003e\n\u003cli\u003e24\" Fence with Swing Stop and Self-Adhesive Measuring Tape\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Miter Gauge\u003c\/li\u003e\n\u003cli\u003e(1) 24\" (610mm) Fence with scale\u003c\/li\u003e\n\u003cli\u003e(1) Swing Stop with Precision Lens Cursor\u003c\/li\u003e\n\u003cli\u003e(1) Self-adhesive measuring tape\u003c\/li\u003e\n\u003cli\u003eOwner's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1327665812,"sku":"KMS7102","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMS7102-1.jpg?v=1668549186"},{"product_id":"kreg-precision-track-and-stop-kit","title":"Kreg Precision Trak \u0026 Stop Kit*","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Final sale.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you'd like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!\u003c\/p\u003e\n\u003cp\u003eThe most common setup for the Precision Trak \u0026amp; Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak \u0026amp; Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method.\u003c\/p\u003e\n\u003cp\u003eDesigned to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.\u003c\/p\u003e\n\u003cp\u003eThe Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.\u003c\/p\u003e\n\u003cp\u003eBuild a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 21\/4\" (57 mm) above the saw table for the stops to glide upon. Instructions and mounting hardware for the Trak are included.\u003c\/p\u003e\n\u003cp\u003eIncredibly strong and built-to-last, our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3\/4\" (19mm) thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2' (610 mm) long sections, giving you setup options: 4' (1219 mm) on each side of the saw, 2' (610 mm) on one side and 6’ (1829 mm) on the other, or all 8' (2438 mm) on one side.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTurn your miter saw into a precise cutting system\u003c\/li\u003e\n\u003cli\u003eAdjustable stops position your workpiece for repeatable, reliable results\u003c\/li\u003e\n\u003cli\u003ePrecision Lens Cursor for fast, accurate positioning\u003c\/li\u003e\n\u003cli\u003eProduction Stop and Swing Stop provide great results\u003c\/li\u003e\n\u003cli\u003eL-shaped base design makes alignment and mounting easy\u003c\/li\u003e\n\u003cli\u003eIncludes 8' of Trak in 2'-long sections that can be used on the right or left side of the saw, or split between both sides\u003c\/li\u003e\n\u003cli\u003e(2) self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Anodized aluminum\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Cuts up to 8' long\u003cbr\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Top Trak, Swing Stop, Production Stop, Self-adhesive measuring tapes\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e (4) 2'sections for 8' of Trak length\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(4) 2' (610mm) pieces of Top Trak\u003cbr\u003e(1) Swing Stop\u003cbr\u003e(1) Production Stop\u003cbr\u003e(1) 12' (3657 mm) L-to-R reading self-adhesive tape\u003cbr\u003e(1) 12' (3657 mm) R-to-L reading self-adhesive tape\u003cbr\u003e(1) Owner's Manual\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1327669864,"sku":"KMS8000","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMS8000-1.jpg?v=1613670483"},{"product_id":"inside-caliper-100mm","title":"Inside Caliper 100mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322693,"sku":"850-1100","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1100.jpg?v=1649262144"},{"product_id":"inside-caliper-200mm","title":"Inside Caliper 200mm","description":"\u003cp\u003e\u003cspan\u003eThis French made tool is of superb quality and will make measuring and layout work easier and more accurate. Nicely polished with brass fittings. An additional feature is a unique quick-nut adjustment that is easy and fast to use.  Hand finishing and testing are the last steps in the production process.  Size indicates the maximum capacity.\u003c\/span\u003e\u003c\/p\u003e","brand":"Robert Larson","offers":[{"title":"Default Title","offer_id":3333322757,"sku":"850-1120","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/850-1120.jpg?v=1649262159"},{"product_id":"kreg-precision-router-table-old","title":"Kreg Precision Router Table","description":"\u003cp\u003eThe Kreg Precision Router Table System combines unmatched versatility with incredible adjustability and ease of setup. This powerful system offers a large, durable table top, a one-of-a-kind T-square style fence, and a durable steel stand that work together to create a router table that meets all of your precision-routing needs.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the system is the Kreg's Precision Router Table Fence. This innovative, anodized-aluminum fence features a table saw-style T-Square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. \u003c\/p\u003e\n\u003cp\u003eTo ensure exact positioning, the fence features a measuring scale that allows you to position the fence and make adjustments based on the bit you are using. An included micro-adjust wheel makes setups simple to ensure precision.\u003c\/p\u003e\n\u003cp\u003eIndependent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit and to maximize chip collection into the fence’s built-in dust port. \u003c\/p\u003e\n\u003cp\u003eThe fence sits on Kreg’s large, durable Precision Router Table Top. This 24\" x 32\" table has a 1\"-thick MDF core that absorbs vibration and offers mass to help create a stable router table. Workpieces glide easily on the tough high-laminate surface. Underneath, steel-reinforcing struts ensure that the table will stay flat.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make routing even easier, the table and fence sit atop a steel stand, which can be adjusted from 31\" to 39 \" high. The pre-drilled holes make it easy to mount accessories and customize the stand.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMultipurpose, self-squaring router table fence system\u003c\/li\u003e\n\u003cli\u003eHigh-performance table top with precision insert-plate system\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, customizable, easily-adjustable steel stand\u003c\/li\u003e\n\u003cli\u003eHeavy-duty table with Easy-Slide low-friction surface\u003c\/li\u003e\n\u003cli\u003ePrecision T-Square style fence with independent sliding faces\u003c\/li\u003e\n\u003cli\u003eIntegrated dust collection\u003c\/li\u003e\n\u003cli\u003eHeight adjustable from 31\" to 39\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable dimensions:\u003c\/strong\u003e 24\" x 32\"\u003cbr\u003e\u003cstrong\u003eInsert plate dimensions:\u003c\/strong\u003e \u003cspan\u003e3\/8\" x 9 1\/4\" x 11 3\/4\"\u003cbr\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e Anodized aluminum, MDF, melamine, steel\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) Precision Router Table Top\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Precision Router Table Fence\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) Multi-Purpose Shop Stand\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/uEg_FR7zjj0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":3612039493,"sku":"PRS1045","price":647.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/PRS1045-1.jpg?v=1680551438"},{"product_id":"titebond-genuine-hide-glue","title":"Titebond Genuine Hide Glue","description":"\u003cp\u003e\u003cspan\u003eTitebond Genuine Hide Glue is the first hide glue to be offered in a liquid, ready-to-use form. It requires no mixing, heating or stirring. Professional woodworkers use Titebond Genuine Hide for its long assembly time, exceptional strength and unique crackling effect on wood. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTitebond Genuine Hide provides superior creep-resistance, offers excellent sand-ability, and is unaffected by finishes. Its sensitivity to moisture allows for easy disassembly of parts, a critical benefit in furniture restoration or the repair of musical instruments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e Above 50° F\u003cbr\u003e\u003cstrong\u003eOpen Assembly Time: \u003c\/strong\u003e10 Minutes\u003cbr\u003e\u003cstrong\u003eTotal Assembly Time:\u003c\/strong\u003e 20-30 Minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Titebond_selection_guide.pdf?v=1776886094\" target=\"_blank\" title=\"Titebond Wood Glue Selection Guide\" rel=\"noopener\"\u003e\u003cspan\u003eTitebond Wood Glue Selection Guide \u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Titebond","offers":[{"title":"8oz","offer_id":46642769821913,"sku":"5013","price":7.99,"currency_code":"USD","in_stock":true},{"title":"16oz","offer_id":46642769854681,"sku":"5014","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/genuinehidemain.jpg?v=1750086021"},{"product_id":"bessey-ezs-one-handed-clamps","title":"Bessey EZS One-Handed Clamps","description":"\u003cp\u003eThe EZS One-Handed Clamps by Bessey offers a revitalized approach to the one hand clamp market. These lightweight and comfortable clamps are capable of exerting up to 445 lbs. of spreading or clamping force. This ergonomically shaped clamp can be easily reconfigured from clamping to spreading without tools. \u003c\/p\u003e\n\u003cp\u003eEZS Clamps feature an intelligent release mechanism where the upper section can quickly convert from clamping to spreading without tools. While all other clamps measure throat depth to the center of the pad, EZ and EZS extend throat depth right to the outside edge of the pads – power spread across the entire pad.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIntelligent release mechanism allows upper section to quickly convert from clamping to spreading without tools\u003c\/li\u003e\n\u003cli\u003eErgonomic handle positioned behind the rail, enabling a powerful grip\u003c\/li\u003e\n\u003cli\u003eSoft pressure caps optimize material protection and secure clamping\u003c\/li\u003e\n\u003cli\u003eThroat depth to the very edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 445 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/VW0UU6DjVRs?si=UVBkI4uouNDPg6wB\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875939180662,"sku":"EZS15-8","price":21.2,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875939115126,"sku":"EZS30-8","price":22.31,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875939049590,"sku":"EZS45-8","price":32.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875939016822,"sku":"EZS60-8","price":25.83,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125342661,"sku":"EZS90-8","price":35.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/EZ21508.jpg?v=1613407863"},{"product_id":"bessey-clutch-style-f-clamps","title":"Bessey Clutch Style F-Clamps with 2K Handle","description":"\u003cp\u003eBessey Clutch Style Clamps are a popular, regular duty clamp that can be used for a wide range of projects. These clamps are easy to use and adjustable thanks to the 2 piece slip clutch design. This allows you to set the clamp at a certain width and it will stay in place, not matter what position the clamp is in. These easy-to-use clamps are suitable for \"close quarters\" clamping with the 2K comfort handle.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic 2K handle\u003c\/li\u003e\n\u003cli\u003ePowder coated, ductile cast iron jaws\u003c\/li\u003e\n\u003cli\u003eNickel plated, drawn serrated rail\u003c\/li\u003e\n\u003cli\u003eNon-marring pads on the top and bottom jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 1,100 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5nuOLjj7Oog?si=ELPFxzoznF_Rxu1R\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875941310582,"sku":"GSCC3.506+2K","price":15.68,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875941245046,"sku":"GSCC3.512+2K","price":16.97,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875941179510,"sku":"GSCC3.518+2K","price":18.36,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875941081206,"sku":"GSCC3.524+2K","price":20.4,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125343173,"sku":"GSCC3.536+2K","price":22.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Fstyle-1.jpg?v=1734634610"},{"product_id":"bessey-auto-adjust-toggle-clamps-inline","title":"Bessey Auto-Adjust Toggle Clamps - Inline","description":"\u003cp\u003eBessey auto-adjust toggle clamps have a wide range of height and force in one clamp. These clamps will automatically adjust to the thickness of your work piece, while applying the same amount of pressure. The pressure the clamp exerts can be easily changed from 25 to 550 pounds by adjusting the thumb screw.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-Adjusts to variations in work piece width up to 0-16 mm (approx 5\/8 IN)\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure screw allows clamping force adjustment\u003c\/li\u003e\n\u003cli\u003eLarge ergonomic handle\u003c\/li\u003e\n\u003cli\u003eHigh quality construction\u003c\/li\u003e\n\u003cli\u003eBase construction is optimized for 1\/4 IN (M6) fasteners\u003c\/li\u003e\n\u003cli\u003ePlunger has an M8 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"3\/8\"","offer_id":44650841309401,"sku":"STC-IHH15","price":24.33,"currency_code":"USD","in_stock":false},{"title":"5\/8\"","offer_id":44650841342169,"sku":"STC-IHH25","price":24.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/stc-ihhmain.jpg?v=1708118009"},{"product_id":"bessey-variable-angle-strap-clamp","title":"Bessey Variable Angle Strap Clamp","description":"\u003cp\u003eClamping large or odd shapes with straps is not new; however, most strap clamps exert force (pull) in only one direction, which can easily distort\/skew the work piece. Bessey's VAS-23 is different — it pulls equally on both ends of the strap, eliminating the chance of skewing your work piece. The high tensile woven polyester strap is extremely strong with a built-in take up reel that neatly stores the excess strap, eliminating a potential tripping hazard.\u003c\/p\u003e\n\u003cp\u003ePerfect for clamping square, rectangular, or irregular shapes. Comes with 4 pivoting Vario corner clips, which adjust to pressure.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap is drawn in on both sides:\u003c\/strong\u003e The strap draws simultaneously from both sides ensuring pressure is applied equally on all corners without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated coiling mechanism:\u003c\/strong\u003e Integrated rewind mechanism is operated with a crank handle which eliminates tangling and damage to the strap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical Vario corners:\u003c\/strong\u003e  Vario clip corners with twin-tilting pressure pads auto-adjust from 60° to 180° for easy assembly of most multi-angle projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtremely resistant:\u003c\/strong\u003e The special woven polyester band provides high resistance to tearing, and a clamping range of 23 ft. The steel wire loop opens quickly and simply to adjust or release glue-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBessey comfort handle:\u003c\/strong\u003e The 2K composite handle with comfort insert comes standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 23 ft.\u003cbr\u003e\u003cstrong\u003eRange of angle:\u003c\/strong\u003e 60° - 180°\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/oedSg1EHd4M?si=3TDE5S8j5PzyNQqv\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":19125344389,"sku":"VAS-23+2K-CB","price":27.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Strap-Clamp.jpg?v=1643379579"},{"product_id":"cmt-digital-angle-gauge","title":"CMT Digital Angle Gauge","description":"\u003cp\u003eThe digital angle gauge is a mini waterproof digital protractor that provides digital readings between ±180° with a resolution of 0,1° and auto shut off after 5 minutes. It is small enough to be carried around in a pocket and the LED screen is convenient to read. It incorporates magnets in the base for adhesion to any ferrous surface to accurately measure miter and bevel angles on miter saws, saw benches, etc.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBattery voltage\/type:\u003c\/strong\u003e 3V\/L lithium.\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 60x60x28mm (2-3\/8\" x 2-3\/8\" x 1-1\/8\").\u003cbr\u003e\u003cstrong\u003eRange:\u003c\/strong\u003e ±180°.\u003cbr\u003e\u003cstrong\u003eResolution:\u003c\/strong\u003e 0.1°\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":19220058117,"sku":"DAG-001","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/DAG-001-1.jpg?v=1652287590"},{"product_id":"kreg-bench-dogs","title":"Kreg Bench Dogs","description":"\u003cp\u003eThese simple 3\/4\" reinforced nylon Bench Dogs will help make your next project easier. Included with each Bench Dog is a solid rubber Bench Brake that can be placed on top of the Bench Dog for a solid, non-slip work surface.\u003c\/p\u003e\n\u003cp\u003ePerfect for routing and sanding.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSquared clamping pad for secure hold\u003c\/li\u003e\n\u003cli\u003eGreat for routing, cutting, and sanding\u003c\/li\u003e\n\u003cli\u003ePlace in Bench Dog or directly in bench\u003c\/li\u003e\n\u003cli\u003eFits standard 3\/4\" (19 mm) Bench Dog hole\u003c\/li\u003e\n\u003cli\u003eBench Brakes press in place for solid, non-slip work surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(4) Bench Dogs with Bench Brakes\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yNvfWkzVyHU\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":28451634825,"sku":"KKS1070","price":12.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KKS1070-1.jpg?v=1669912352"},{"product_id":"cmt-formula-2050-blade-and-bit-cleaner-18-oz","title":"CMT Formula 2050 Blade and Bit Cleaner - 18 oz.","description":"\u003cp\u003eCMT Formula 2050 keeps your blades, bits, and cutters clean and rust-free. Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between carbide and steel surfaces, and the resin itself, making it extremely effective. It can be applied with a spray bottle or used in cleaning preparations for ultrasonic washers (122°F, 15 minutes) or immersion tanks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves resin, pitch, and adhesive residue from all woodworking cutting tools (saw blades, router bits, drill bits, shaper cutters, etc.)\u003c\/li\u003e\n\u003cli\u003eCan be applied by spray bottle or used in ultrasonic cleaners and dip tanks.\u003c\/li\u003e\n\u003cli\u003eAvailable in 18 oz. bottle or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/cmt-formula-2050-blade-and-bit-cleaner-1-gallon\" target=\"_blank\" title=\"CMT Formula 2050 Blade and Bit Cleaner - 1 Gallon product page\" rel=\"noopener\"\u003e1 gallon container\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":43881304585,"sku":"998.001.01","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/998.001.01-1.jpg?v=1668717651"},{"product_id":"kreg-cabinet-hardware-jig","title":"Kreg Cabinet Hardware Jig","description":"\u003cp\u003eThe Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The moveable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new construction and for refreshing entire rooms.\u003c\/p\u003e\n\u003cp\u003eWhether you're updating your cabinets or building a project from scratch, adding hardware like knobs and pulls is often one of the final steps —​ and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you'll know that every piece of hardware is positioned correctly and consistently.\u003c\/p\u003e\n\u003cp\u003eThe Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.\u003c\/p\u003e\n\u003cp\u003eThe Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3\/16\", bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 3\/16\" (5 mm) required drill bit is not included. Check out our selection of drill bits \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drill-bits-menu\" target=\"_blank\" title=\"All Drill Bits\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable guides for accurate hole placement\u003c\/li\u003e\n\u003cli\u003eBuilt-in measuring scales for repeatable results\u003c\/li\u003e\n\u003cli\u003eVersatile for mounting single and multi-hole knobs\u003c\/li\u003e\n\u003cli\u003eAdjustable edge guide for easy positioning\u003c\/li\u003e\n\u003cli\u003eStrong, lightweight materials for easy handling\u003c\/li\u003e\n\u003cli\u003eDurable hardened-steel drill guides\u003c\/li\u003e\n\u003cli\u003e1\" to 5\" (25mm-127mm) edge guide to hole-center spacing\u003c\/li\u003e\n\u003cli\u003e2 1\/2\", 3\", 3 1\/2\", 4\", 4 1\/2\", 5\" and 64mm, 96mm, 128mm drill guide spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Jig base\u003c\/li\u003e\n\u003cli\u003e(1) Edge guide\u003c\/li\u003e\n\u003cli\u003e(2) Drill guides with knurled nuts\u003c\/li\u003e\n\u003cli\u003e(2) Non-slip pads\u003c\/li\u003e\n\u003cli\u003e(2) T-knobs and bolts\u003c\/li\u003e\n\u003cli\u003e(1) Owner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kbpw20MDhAc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":45491772553,"sku":"KHI-PULL","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHI-PULL-1.jpg?v=1671113024"},{"product_id":"kreg-accu-cut","title":"Kreg Accu-Cut™ Circular Saw Track Guide","description":"\u003cp\u003eTransform your circular saw into a high-performance, track-guided cutting tool. Make straight, accurate, splinter-free cuts with the Kreg Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts, and makes angled cuts up to 50\" long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control.\u003c\/p\u003e\n\u003cp\u003eCircular saws don’t have effective guides that keep them moving straight along a cut line. Plus, it can be difficult to see the blade’s cutting path. Together, these things make it challenging to keep a saw on your desired cut. Circular saws also often cause splintering of face veneers. The Accu-Cut solves these problems. It is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw.\u003c\/p\u003e\n\u003cp\u003eThe Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts.\u003c\/p\u003e\n\u003cp\u003eThe Accu-Cut is easy and intuitive for a novice to use, but robust enough for professionals. Because it eliminates the need to keep the saw straight and manually guide the saw along a cut line, the Accu-Cut is ideal for less-experienced users. Accu-Cut also makes professionals faster and more productive because it makes a variety of cuts quickly and easily in the shop and on the job site.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe Accu-Cut™ is designed for use with portable circular saws that have a metal upper blade guard. When paired with the Accu-Cut, a saw with a plastic upper blade guard may allow deflection between the blade and the base plate resulting in poor cut quality. Do not use a saw with a plastic upper blade guard with the Accu-Cut.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRip, crosscut, and make angled cuts up to 50\" long in plywood, MDF, and panels\u003c\/li\u003e\n\u003cli\u003eSimply align the Track Guide with your marks to make accurate cuts\u003c\/li\u003e\n\u003cli\u003eHold track in place without clamps thanks to anti-slip guide strips\u003c\/li\u003e\n\u003cli\u003ePrevent splintering with anti-chip strips that support material during the cut\u003c\/li\u003e\n\u003cli\u003eBegin cuts easily with a Starting Block that the supports saw and allows normal blade guard operation\u003c\/li\u003e\n\u003cli\u003eMount almost any circular saw — left- or right-blade — to the Universal Sled\u003c\/li\u003e\n\u003cli\u003eTake your saw to the material instead of having to take your material to the saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Universal Saw Sled\u003c\/li\u003e\n\u003cli\u003e(2) 26.5\" Aluminum Guide Tracks\u003c\/li\u003e\n\u003cli\u003e(2) Track Connectors\u003c\/li\u003e\n\u003cli\u003e(1) Starting Block\u003c\/li\u003e\n\u003cli\u003e(1) Track Indicator Clip\u003c\/li\u003e\n\u003cli\u003eOwner's Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kQuQs23M2g4\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":887914233865,"sku":"KMA2700","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KMA2700-1.jpg?v=1671054421"},{"product_id":"kreg-precision-router-lift","title":"Kreg Precision Router Lift","description":"\u003cp\u003eThe Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3-8\" x 9-1\/4\" x 11 3\/4\" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table.\u003c\/p\u003e\n\u003cp\u003eWith the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.\u003c\/p\u003e\n\u003cp\u003ePrecision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1\/16\", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.\u003c\/p\u003e\n\u003cp\u003eWhether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.\u003c\/p\u003e\n\u003cp\u003eCompatible with the \u003ca title=\"Kreg Precision Router Table product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-precision-router-table\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-precision-router-table\"\u003eKreg Precision Router Table\u003c\/a\u003e, \u003ca title=\"Kreg Precision Router Table Top product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-precision-router-table-top-24-x-36\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-precision-router-table-top-24-x-36\"\u003eRouter Table Top\u003c\/a\u003e, and \u003ca title=\"Kreg Precision Benchtop Router Table product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/router-table\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/router-table\"\u003eBenchtop Router Table\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAccepts most popular routers with motor diameters between 3.2\" - 4.2\" without the need for modification.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAllows precise above-the-table setup changes for table-mounted routers\u003c\/li\u003e\n\u003cli\u003eAbove-table collet access allows fast, easy, above-table bit changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e3-8\" x 9-1\/4\" x 11 3\/4\"\u003c\/span\u003e (9.5 mm x 235mm x 298mm) hard-anodized aluminum plate won’t sag, resists scratches\u003c\/li\u003e\n\u003cli\u003eFits all Kreg Router Tables and many competitive brands\u003c\/li\u003e\n\u003cli\u003eBearing-guided carriage provides smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision indexing ring with micro-adjust scale simplifies bit height changes\u003c\/li\u003e\n\u003cli\u003ePrecise adjustment without backlash ensures accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/pPjUUwBXzo4\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":19128111693942,"sku":"PRS5000","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/PRS5000-1.jpg?v=1671130140"},{"product_id":"supermax-16-32-drum-sander","title":"SuperMax 16-32 Drum Sander","description":"\u003cp\u003eA compact machine with big-capacity features, the SuperMax 16-32 Drum Sander allows you to precisely sand workpieces as wide as 32” in just two passes. This sander was designed with features that both increase and ease production, including a patented quick lever adjustment for thickness and INTELLISAND technology, which prevents gouging. Designed for everyone, from luthiers to turners, furniture builders to cabinetmakers, and more.\u003c\/p\u003e\n\u003cp\u003eThe 16-32 features a patented quick lever adjustment system. This system offers a fast method to make height adjustments of 3” up or down in one simple movement of the lever, reducing set-up time and increasing productivity.\u003c\/p\u003e\n\u003cp\u003eINTELLISAND technology on the 16-32 Drum Sander prevents gouging and reduces the potential for burning stock by automatically adjusting conveyor speed based on load. It incorporates infinitely variable speed settings (0-10’\/min) for the ultimate control of conveyor settings.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/supermax-16-drum-boxed-abrasive-wraps-4-wraps-per-box\" target=\"_blank\" title='SuperMax 16\" Drum Sander Abrasive Wraps (4 Pack) product page' rel=\"noopener\"\u003e16\" Abrasive Wraps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/supermax-16-32-drum-sander-folding-infeed-outfeed-tables\" target=\"_blank\" title=\"SuperMax 16-32 Drum Sander Folding Infeed\/Outfeed Tables product page\" rel=\"noopener\"\u003eInfeed\/Outfeed Tables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/supermax-caster-wheels\" target=\"_blank\" title=\"SuperMax Caster Wheels for Sanders product page\" rel=\"noopener\"\u003eCaster Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/supermax-abrasive-cleaning-stick\" target=\"_blank\" title=\"SuperMax Abrasive Cleaning Stick product page\" rel=\"noopener\"\u003eAbrasive Cleaning Stick\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"SuperMax Drum Sander Comparison Chart\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/SuperMax_Drum_Sander_Comparison_Chart.pdf?v=1703087724\"\u003eCompare Models \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePatented “Quick Lever Adjustment” allows height adjustments from 0″-3″ with one pull of a lever, reducing set-up time and increases productivity\u003c\/li\u003e\n\u003cli\u003eAutomatic abrasive tension maintains proper tension on sanding wraps\u003c\/li\u003e\n\u003cli\u003eINTELLISAND technology prevents gouging and reduces risk of burning stock\u003c\/li\u003e\n\u003cli\u003eDRO (Digital Readout) incorporated into sander for precise adjustments and exact repeatability\u003c\/li\u003e\n\u003cli\u003eDrum carriage is bolted to the base, preventing any movement or alignment issues\u003c\/li\u003e\n\u003cli\u003eTurbo-vented dust port increases CFM of dust collection by 15%\u003c\/li\u003e\n\u003cli\u003eSelf-cooling drum prevents overheating and drum distortion\u003c\/li\u003e\n\u003cli\u003eAdjustable tension rollers prevent snipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. Sanding Width:\u003c\/strong\u003e 32″ (two passes)\u003cbr\u003e\u003cstrong\u003eMin. Sanding Length:\u003c\/strong\u003e 2-1\/4″\u003cbr\u003e\u003cstrong\u003eMax. Sanding Thickness:\u003c\/strong\u003e 3″\u003cbr\u003e\u003cstrong\u003eMin. Sanding Thickness:\u003c\/strong\u003e 1\/32″ \u003cbr\u003e\u003cstrong\u003eDrum Dimensions:\u003c\/strong\u003e 5″ x 16″ extruded aluminum\u003cbr\u003e\u003cstrong\u003eDrum Speed:\u003c\/strong\u003e 1,740 RPM\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eConveyor Speed:\u003c\/strong\u003e 0-10 FPM\u003cbr\u003e\u003cstrong\u003eDrive Motor:\u003c\/strong\u003e 1.5HP\u003cbr\u003e\u003cstrong\u003ePower Requirements:\u003c\/strong\u003e 110 V, 15 Amp, 20 AMP\u003cbr\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 158 lbs. (1 box including stand)\u003cbr\u003e\u003cstrong\u003eDimensions (W x D x H):\u003c\/strong\u003e W: 34″ x 22″ x 48″ (without casters)\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/wR2BAfpPVvE?start=29\" height=\"315\" width=\"100%\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SuperMax","offers":[{"title":"Default Title","offer_id":20950791323766,"sku":"SUPMX-71632","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/SUPMX-71632-2.jpg?v=1656607949"},{"product_id":"cornering-tool-set-1","title":"Veritas Cornering Tool Set","description":"\u003cp\u003eA cornering tool is actually a small molding plane. It cuts a fixed-radius curve on an edge.\u003c\/p\u003e\n\u003cp\u003eThese cornering tools have a different radius cutter on each end. One tool cuts a 1\/16\" and a 1\/8\" radius and the other cuts a 3\/16\" and a 1\/4\" radius. They are ground with two fixed fences that stop the tool from cutting past the fixed radius. Made in England from tool steel hardened to Rc48-52, they hold an excellent edge.\u003c\/p\u003e\n\u003cp\u003eEasy to use, they cut on either the push or pull stroke. They remove material quickly and easily. Since they do the work of four rounding planes, they are not only economical, but they also avoid the dust, noise and set-up time required to do the same work with a router.\u003c\/p\u003e\n\u003cp\u003eIncluded in the set is an extrusion designed to sharpen the four different cutting radii plus the 1\/2\" radius inside curve. A piece of 600x silicon carbide paper and a wedge (to hold it into position) complete the sharpening kit.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe tools have a different radius on each end; one tool cuts a 1\/16\" and 1\/8\" radius, and the other cuts a 3\/16\" and 1\/4\" radius\u003c\/li\u003e\n\u003cli\u003eGround with two fixed fences to stop tool from cutting past fixed radius\u003c\/li\u003e\n\u003cli\u003eMade from tool steel hardened to Rc48-52\u003c\/li\u003e\n\u003cli\u003eCut on either push or pull stroke\u003c\/li\u003e\n\u003cli\u003eAccurately ground and ready for final honing\u003c\/li\u003e\n\u003cli\u003eSet includes both cornering tools and sharpening kit; also includes an extrusion designed to sharpen the four different cutting radii plus the 1\/2\" radius inside curve, a piece of 600x silicon carbide paper and a wedged to hold it in position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Cornering tools\u003c\/li\u003e\n\u003cli\u003eSharpening kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21882669891702,"sku":"05K5030","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05K5030-1.jpg?v=1670253533"},{"product_id":"mk-ii-honing-guide-1","title":"Veritas Mk.II Honing Guide","description":"\u003cp\u003eThe Veritas Mk.II Standard Honing Guide allows you to sharpen blades without worrying about controlling the blade angle at the same time. It provides a reliable method for honing a wide range of tools by ensuring consistent, accurate results.\u003c\/p\u003e\n\u003cp\u003eThis honing guide is the best choice for woodworkers who mostly use wide blades. It consists of a standard blade carrier, a straight roller, and a registration jig.\u003c\/p\u003e\n\u003cp\u003eThe Mk. II will set bevel angles from 15° to 54° and back bevels from 10° to 20°, and it will accommodate blades from 1\/4\" to 2-7\/8\" in width. Blade stop with discrete positions for preset bevels and three-position eccentric roller allows you to hone micro bevels quickly and accurately with a turn of a knob.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDie-cast zinc alloy with precision-machined brass and steel components\u003c\/li\u003e\n\u003cli\u003eBlade-registration jig slides onto guide body, centering and squaring blade using integral fence\u003c\/li\u003e\n\u003cli\u003eBlade stop has discrete positions for preset angles\u003c\/li\u003e\n\u003cli\u003eThree-position eccentric roller that allows you to hone micro bevels quickly and accurately by turning a knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Width:\u003c\/strong\u003e Accepts blades from 1\/4\" to 2-7\/8\" in width and up to 15\/32\" thick\u003cbr\u003e\u003cstrong\u003eBevel Angles:\u003c\/strong\u003e Hones bevels from 15° to 54°\u003cbr\u003e\u003cstrong\u003eBack Bevel Angles:\u003c\/strong\u003e 10° to 20°\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamping head\u003c\/li\u003e\n\u003cli\u003eStraight roller base\u003c\/li\u003e\n\u003cli\u003eAngle registration jig\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/TOOAeuTLFhQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970500485238,"sku":"05M0901","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M0901_96d876bb-c4e8-465f-b25f-9849e450b3ac.jpg?v=1624296517"},{"product_id":"crosscut-carcass-saw-14-tpi-1","title":"Veritas Crosscut Carcass Saw 14 TPI","description":"\u003cp\u003eThe Veritas Crosscut Carcass Saw is designed for cutting across the grain and the rip carcass saw is designed for cutting with the grain. \u003c\/p\u003e\n\u003cp\u003eCarcass saws are good general-utility saws for cutting the typical joints used in cabinetry, trimming frame members to length, cutting small to medium-sized tenons, etc. \u003c\/p\u003e\n\u003cp\u003eThe Veritas saws combine the best characteristics of the classic fine joinery saw with those of state-of-the-art materials and construction methods. The tooth pattern on the thin high-carbon steel blade provides a good balance between cutting action and surface finish.\u003c\/p\u003e\n\u003cp\u003eThe pistol-grip design of the wooden handle makes it intuitive to hold the saw such that the index finger rests on the stainless-steel\/glass\/polymer composite spine, which provides strength and rigidity.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTeeth have 0.003\" of set per side\u003c\/li\u003e\n\u003cli\u003eMolded spine incorporates stainless-steel powder for weight, glass fiber for stiffness and advanced polymer binder\u003c\/li\u003e\n\u003cli\u003eOver-molded blade and stainless-steel handle-mounting bolt create solid one-piece blade\/spine\/mount assembly\u003c\/li\u003e\n\u003cli\u003eSingle brass fastener secures hardwood handle\u003c\/li\u003e\n\u003cli\u003eOpen-grip handle is larger than those of classic carcass saws; permits comfortable, secure grip\u003c\/li\u003e\n\u003cli\u003eHigh-carbon steel blade\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e\u003cspan\u003e 16-3\/8\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eBlade length:\u003c\/strong\u003e\u003cspan\u003e 11\" \u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eBlade thickness:\u003c\/strong\u003e 0.02\"\u003cbr\u003e\u003cstrong\u003eCut depth:\u003c\/strong\u003e 2-3\/8\"\u003cbr\u003e\u003cstrong\u003eRake angle:\u003c\/strong\u003e 15°\u003cbr\u003e\u003cstrong\u003eTPI (number of teeth per inch):\u003c\/strong\u003e\u003cspan\u003e 14\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970507858038,"sku":"05T0701","price":115.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05T0701-1.jpg?v=1673034165"},{"product_id":"double-edge-flush-trim-saw-1","title":"Veritas Double Edge Flush-Trim Saw","description":"\u003cp\u003eThe Veritas Double Edge Flush-Trim Saw is traditionally used for the rapid trimming of plugs and dowels flush with a surface. This flush-cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only.\u003c\/p\u003e\n\u003cp\u003eThe 22 TPI Japanese tooth pattern blade cuts aggressively (on the pull stroke) but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTeeth set one way only; 22 tpi Japanese tooth-pattern blade cuts aggressively (on pull stroke) but does not mark adjacent surface\u003c\/li\u003e\n\u003cli\u003eBlade is thin and flexible and can be pressed flush to surface; is still rigid for good control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTotal length:\u003c\/strong\u003e 11-1\/2\"\u003cbr\u003e\u003cstrong\u003eBlade length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4-3\/4\" \u003cbr\u003e\u003cstrong\u003eTPI (number of teeth per inch):\u003c\/strong\u003e\u003cspan\u003e 26\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970507956342,"sku":"05K3601","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05K3601-1_ded03a79-7dd3-4f1e-8ec5-e912b862f6c4.jpg?v=1673034021"},{"product_id":"skew-registration-jig-1","title":"Veritas Skew Registration Jig for Mk.II Honing Guide","description":"\u003cp\u003eThe Skew Registration Jig is used with the Veritas Mk.II Honing Guide, allowing skew chisels and blades to be accurately and repeatedly sharpened and honed to a very sharp edge.\u003c\/p\u003e\n\u003cp\u003eThe jig attaches to the guide using the same dovetail feature along the front of the blade carrier as the standard registration jig. It is used with the blade carrier set to the standard-angle configuration.\u003c\/p\u003e\n\u003cp\u003eThe jig's machined aluminum base provides skew angle markings that are laser etched for accuracy and legibility. The skew angle graduations cover the range of 10° to 45° in 5° increments, and there are additional marks (18°, 22°, 28°) to cover the angles of popular skew plane blades.\u003c\/p\u003e\n\u003cp\u003eThe base has four distinct tracks providing four bevel angle settings: 20°, 25°, 30° and 35°. (A micro-bevel can be created with the honing guide’s eccentric roller axle mount.) The unique sliding fence with blade stop allows you to match an existing skew angle visually – even if it is non-standard.\u003c\/p\u003e\n\u003cp\u003eFor use with the standard head only – the narrow-blade clamping head’s parallel jaws are not designed for sharpening skews.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLocks into guide to set bevels and bevel angles (left- or right-hand)\u003c\/li\u003e\n\u003cli\u003eMachined aluminum base provides skew angle markings laser etched for accuracy and legibility\u003c\/li\u003e\n\u003cli\u003eSkew angle graduations cover range of 10° to 45° in 5° increments; additional marks (18°, 22°, 28°) cover angles of popular skew plane blades\u003c\/li\u003e\n\u003cli\u003eFour distinct tracks provide four bevel angle settings (20°, 25°, 30° and 35°)\u003c\/li\u003e\n\u003cli\u003eMatch existing skew angle visually (even non-standard) using sliding fence with blade stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/vD2R9vOFDJI\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970535088246,"sku":"05M0903","price":42.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M0903.jpg?v=1649262277"},{"product_id":"small-crosscut-saw-16-tpi-1","title":"Veritas Small Crosscut Saw 16 TPI","description":"\u003cp\u003eYou want a crosscut saw whenever cutting across or perpendicular to the grain, such as when cutting tenon shoulders. A crosscut blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers. It tracks better and leaves a smoother finish than would a rip-cut blade used across the grain.\u003c\/p\u003e\n\u003cp\u003eThis crosscut saw is an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art materials. The saw spine is an advanced material, incorporating stainless-steel powder for weight, glass fiber for stiffness, and a polymer resin binder. The over-molded blade and stainless-steel handle-mounting bolt create a solid blade\/spine\/mount assembly. A single brass fastener secures the hardwood handle.\u003c\/p\u003e\n\u003cp\u003eThe 9-1\/4\" long, 0.020” thick high-carbon steel blade has 16 teeth per inch, with 0.003\" of set per side. The teeth have 15° rake and bevel angles. Cut depth is about 1-9\/16\".\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBlade length:\u003c\/strong\u003e 9-1\/4\"\u003cbr\u003e\u003cstrong\u003eCut depth:\u003c\/strong\u003e 1-9\/16\"\u003cbr\u003e\u003cstrong\u003eTPI:\u003c\/strong\u003e 16\u003cbr\u003e\u003cstrong\u003eRake \u0026amp; bevel angles:\u003c\/strong\u003e 15°\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970535284854,"sku":"05T0601","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05T0601-1.jpg?v=1670255016"},{"product_id":"dovetail-saw-20-tpi-1","title":"Veritas Dovetail Saw Fine-Cut 20 TPI","description":"\u003cp\u003eVeritas Saws combine the best characteristics of the classic fine joinery saw with those of state-of-the-art materials and construction methods. The tooth pattern on the thin high-carbon steel blade provides a good balance between cutting action and surface finish.\u003c\/p\u003e\n\u003cp\u003eThe pistol-grip design of the wooden handle makes it intuitive to hold the saw with the index finger resting on the stainless-steel\/glass\/polymer composite spine, which provides strength and rigidity.\u003c\/p\u003e\n\u003cp\u003eWhen cutting joints, it is desirable to match the tooth pattern to the thickness of the material you are using. This fine-tooth dovetail saw is intended for material 1\/2\" and thinner. This is by no means a hard rule, as this saw will cut outside this range; however, it is most efficient within its specified range.\u003c\/p\u003e\n\u003cp\u003eThe teeth on this fine-tooth dovetail saw are filed at 20 teeth per inch, with a 14° rake and a 60° included angle. A double-extra-slim file will be necessary for sharpening these teeth. Set is 0.003\" per side.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIncorporates all of the critical characteristics of a classic fine joinery saw, yet is executed using modern production processes and state-of-the-art materials\u003c\/li\u003e\n\u003cli\u003eThe 0.020\" thick high-carbon steel blade features 14 rip-cut teeth per inch, having 0.003\" of set per side\u003c\/li\u003e\n\u003cli\u003eThe teeth have a rake angle of 14° and an included angle of 60°\u003c\/li\u003e\n\u003cli\u003eThe revolutionary spine is injection molded under high pressure using an advanced material, incorporating stainless-steel powder for weight, glass fiber for stiffness and a polymer resin binder\u003c\/li\u003e\n\u003cli\u003eThe blade and stainless-steel handle-mounting bolt are completely over-molded, creating a solid one-piece blade\/spine\/mount assembly\u003c\/li\u003e\n\u003cli\u003eA single brass fastener secures the bubinga handle, the shape of which has been derived from antique saws in the Lee Valley collection\u003c\/li\u003e\n\u003cli\u003eThe saw has excellent balance, cuts easily and true and has a comfortable pistol grip that makes the saw feel as if it's an extension of your arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 14-1\/4\"\u003cbr\u003e\u003cstrong\u003eTPI:\u003c\/strong\u003e 20\u003cbr\u003e\u003cstrong\u003eRake angle:\u003c\/strong\u003e 14°\u003cbr\u003e\u003cstrong\u003eIncluded angle:\u003c\/strong\u003e 60°\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":21970536661110,"sku":"05T0505","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05T0505-1.jpg?v=1670254734"},{"product_id":"dmt-3-dia-sharp-credit-card-sized-sharpener","title":"DMT 3\" Dia-Sharp Credit Card Sized Sharpener","description":"\u003cp\u003eTake your sharpening anywhere with the ready-to-go Dia-Sharp Credit Card Sized Diamond Sharpener. Fits easily in pocket or wallet. Each sharpener comes in a convenient vinyl color-coded carry case. Measures 3-1\/4\" x 2\" x .05\"\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGrit Descriptions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoarse diamond (45 micron \/ 325 mesh) to quickly restore a neglected edge.\u003c\/li\u003e\n\u003cli\u003eFine diamond (25 micron \/ 600 mesh) for a razor sharp edge.\u003c\/li\u003e\n\u003cli\u003eExtra-Fine (9 micron \/ 1200 mesh) to polish and refine a razor edge after sharpening with a coarser diamond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSharpening with diamonds is fast and easy. No messy oils needed-sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service. For proper tool maintenance, woodworkers, chefs, and other professionals rely on the superior quality and versatility of DMT® products. Made in the USA.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocket-sized convenience\u003c\/li\u003e\n\u003cli\u003eDMT®'s monocrystalline diamond surface sharpens knives faster than conventional stones.\u003c\/li\u003e\n\u003cli\u003eNo oil is needed-sharpen dry or with water\u003c\/li\u003e\n\u003cli\u003eDurable construction will provide years of consistent performance and reliable service\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DMT","offers":[{"title":"Coarse","offer_id":22050905587830,"sku":"D3C","price":12.93,"currency_code":"USD","in_stock":true},{"title":"Fine","offer_id":22050905620598,"sku":"D3F","price":12.93,"currency_code":"USD","in_stock":true},{"title":"Extra Fine","offer_id":22050905653366,"sku":"D3E","price":12.93,"currency_code":"USD","in_stock":true},{"title":"Coarse-Fine-Extra Fine Set","offer_id":22050905686134,"sku":"D3EFC","price":25.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/D3C-1.jpg?v=1668625367"},{"product_id":"dmt-6-double-sided-dia-sharp-bench-stone","title":"DMT 6\" Double Sided Dia-Sharp Bench Stone","description":"\u003cp\u003eFor sharpening applications when versatility is important but storage is limited, the DMT 6\" Double Sided Dia-Sharp Bench Stone has you covered.\u003c\/p\u003e\n\u003cp\u003eFeaturing a continuous diamond sharpening surface and two grit options in one stone, you can sharpen knives, blades, and fine tools alike with professional speed precision. It can even be used to flatten conventional and water stones.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThanks to its micronized monocrystalline diamond surfaces, you can sharpen edges faster and easier than conventional stones can. No messy oils are needed either, allowing you to sharpen dry or with water.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoose from one of the following grit combinations: Coarse\/Extra-Coarse, Fine\/Coarse, Fine\/Extra-Coarse, or Extra-Fine\/Fine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGrit Guide\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eCoarse:\u003c\/strong\u003e to quickly restore a neglected edge\u003cbr\u003e\u003cstrong\u003eExtra-Coarse:\u003c\/strong\u003e for significant removal of material when needed to repair a damaged edge\u003cbr\u003e\u003cstrong\u003eFine:\u003c\/strong\u003e for honing a razor sharp edge\u003cbr\u003e\u003cstrong\u003eExtra-Fine:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eto polish and refine a razor edge after sharpening with a coarser diamond\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-sided convenience\u003c\/li\u003e\n\u003cli\u003eSharpens faster than conventional stones with DMT micronized monocrystalline diamond surface\u003c\/li\u003e\n\u003cli\u003eNo oil needed, sharpen dry or with water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSurface measurement per side:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e6\" x 2-1\/4\"\u003cbr\u003e\u003cstrong\u003eCoarse diamond surface:\u003c\/strong\u003e 45 micron \/ 325 mesh\u003cbr\u003e\u003cstrong\u003eExtra-course diamond surface:\u003c\/strong\u003e 60 micron \/ 220 mesh\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFine diamond surface:\u003c\/strong\u003e 25 micron \/ 600 mesh\u003cbr\u003e\u003cstrong\u003eExtra-fine diamond surface:\u003c\/strong\u003e 9 micron \/ 1200 mesh\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"DMT","offers":[{"title":"Coarse\/Extra-Coarse","offer_id":22050905849974,"sku":"D6CX","price":52.79,"currency_code":"USD","in_stock":true},{"title":"Fine\/Coarse","offer_id":22050905882742,"sku":"D6FC","price":52.79,"currency_code":"USD","in_stock":true},{"title":"Fine\/Extra-Coarse","offer_id":22050905915510,"sku":"D6FX","price":52.79,"currency_code":"USD","in_stock":true},{"title":"Extra-Fine\/Fine","offer_id":22050906964086,"sku":"D6EF","price":52.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/D6CX-1.jpg?v=1668695655"},{"product_id":"dmt-blue-non-skid-mat-10-x-4","title":"DMT Blue Non-Skid Mat 10\" x 4\"","description":"\u003cp\u003eTo prevent your sharpening stone from sliding off your sharpening surface, use the DMT non-skid mat. Size: 10\" x 4\" is good for most bench stones and all pocket model stones.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNon-skid surface\u003c\/li\u003e\n\u003cli\u003eSized to fit most bench stones and all pocket models\u003c\/li\u003e\n\u003cli\u003eEasily fits in tool box or drawer\u003c\/li\u003e\n\u003cli\u003ePrevents scratches on counters\u003c\/li\u003e\n\u003cli\u003eHolds bench stones securely in place\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DMT","offers":[{"title":"Default","offer_id":22050906407030,"sku":"SR009","price":6.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/SR009-1.jpg?v=1669914726"},{"product_id":"dmt-duobase-bench-stone-base-accessory-with-magnabase-adapter","title":"DMT DuoBase Bench Stone Base Accessory with MagnaBase Adapter","description":"\u003cp\u003eDuoBase Bench Stone Accessory can be used with ALL DuoSharp and Dia-Sharp Bench Stones, and any 6\" x 2\" Diamond Whetstone. Provides 2\" knuckle clearance for ease of use.\u003c\/p\u003e\n\u003cp\u003eThis model offers a MagnaBase Adapter to accommodate Dia-Sharp bench stones. Rubber feet secure the base and stone to the work bench or counter. Features a convenient handle on the underside for use with the DuoSharp bench stones for moving the stone over a large work piece for maximum versatility.\u003c\/p\u003e\n\u003cp\u003eDurable construction will provide years of consistent performance and reliable service. For proper tool maintenance, woodworkers, chefs and other professionals rely on the superior quality and versatility of DMT products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do not use convenient handle feature with Dia-Sharp bench stones.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA must have accessory for any DuoSharp® and Dia-Sharp bench stones and any 6\" x 2\" Diamond Whetstone\u003c\/li\u003e\n\u003cli\u003eEasy snap-in clips to fit DuoSharp® bench stones or MagnaBase Adapter for Dia-Sharp bench stones\u003c\/li\u003e\n\u003cli\u003eProvides 2\" knuckle clearance for ease of use\u003c\/li\u003e\n\u003cli\u003eFeatures convenient handle on underside for moving stone over large work piece with the DuoSharp bench stone\u003c\/li\u003e\n\u003cli\u003eDurable construction will provide years of consistent performance and reliable service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/iLwnVyRfeEI\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"DMT","offers":[{"title":"Default Title","offer_id":22050906538102,"sku":"B8250-MBA","price":35.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/B8250-MBA-1.jpg?v=1668629707"},{"product_id":"dmt-three-stone-6-diamond-whetstone-set-in-hardwood-box","title":"DMT Three Stone 6\" Diamond Whetstone Set in Hardwood Box","description":"\u003cp\u003eA beautiful hardwood box of three 6\" Diamond Whetstone™ sharpeners makes a perfect gift. One of DMT's most popular sharpening stones, it is a fit at home or in the shop offering a sharpening surface to satisfy a variety of edge care needs. The box includes rubber feet and three stones: Extra-Fine, Fine, and Coarse. Each stone measures 6\" x 2\" x 3\/4\" and the box measures 7.75\" x 7.25\" x 1.25\".\u003c\/p\u003e\n\u003cp\u003eSharpening with diamonds is fast and easy. No messy oils needed-sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service. For proper tool maintenance, woodworkers, chefs, and other professionals rely on the superior quality and versatility of DMT® products. Made in the USA.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA great gift. The perfect sharpener for at home or in the shop offering a sharpening surface to satisfy a variety of edge care needs\u003c\/li\u003e\n\u003cli\u003eThree different diamond stones: Extra-Fine to polish and refine an edge, Fine for a razor sharp edge and Coarse to transform a dull edge\u003c\/li\u003e\n\u003cli\u003eSharpens edges faster than conventional stones with DMT®'s monocrystalline diamond surface.\u003c\/li\u003e\n\u003cli\u003eNo oil is needed-sharpen dry or with water\u003c\/li\u003e\n\u003cli\u003eDurable construction will provide years of consistent performance and reliable service\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DMT","offers":[{"title":"Default Title","offer_id":22050906570870,"sku":"W6EFC","price":108.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/W6EFC-1.jpg?v=1668626086"},{"product_id":"short-arm-pro-light-system","title":"Laguna Short Arm Pro Light System","description":"\u003cp style=\"font-weight: 400;\"\u003eLaguna halogen high-intensity light for the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-14-12-band-saw\" target=\"_blank\" title=\"Laguna 14|12 Bandsaw 1.75hp, 1PH, 115\/230V product page\" rel=\"noopener noreferrer\"\u003e14|12 Band Saw\u003c\/a\u003e provides exceptional lighting for your work. Installation is a breeze with no drilling required, just a 110v outlet to plug it into!\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSwivels 220°\u003c\/li\u003e\n\u003cli\u003e110 Volt \/ 50 Watt\u003c\/li\u003e\n\u003cli\u003eTilts Vertically 320°\u003c\/li\u003e\n\u003cli\u003eBuilt-in Transformer\u003c\/li\u003e\n\u003cli\u003eIndependent ON\/OFF\u003c\/li\u003e\n\u003cli\u003eRibbed Aluminum Case\u003c\/li\u003e\n\u003cli\u003eBright, Glare-Free Flood Light\u003c\/li\u003e\n\u003cli\u003eReinforced Glass, Dustproof Design\u003c\/li\u003e\n\u003cli\u003eDesigned for Even Light Distribution\u003c\/li\u003e\n\u003cli\u003eDoes Not Require Saw to Be Turned On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/nA9VYnYTA0U\" height=\"315\" width=\"100%\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22488047419510,"sku":"MBA14\/12 LIGHT","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MBA1412LIGHT.jpg?v=1688156115"},{"product_id":"pro-light-system-double-arm-220-volt","title":"Laguna Pro Light System Double Arm 220 Volt","description":"\u003cp\u003e\u003cspan\u003eA high-intensity halogen light for the Laguna 14|BX bandsaw provides exceptional lighting for your work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFits Bandsaws 220V \u003ca title=\"Laguna 14|Bx Bandsaw 2.5hp, 1PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-14-bx-220v-2-5hp\" target=\"_blank\"\u003e14|bx\u003c\/a\u003e, \u003ca title=\"Laguna 18|BX Band Saw 3hp, 1PH, 220V product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-18-bx-bandsaw-220v-3hp\"\u003e18|bx\u003c\/a\u003e, and 220V \u003ca title=\"Laguna Revo 24|36 Lathe 220 Volt product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/laguna-revo-24-36-lathe-220-volt\" target=\"_blank\"\u003eRevo 24|36 Lathe\u003c\/a\u003e. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e220 Volt\u003c\/li\u003e\n\u003cli\u003eLong Arm Design\u003c\/li\u003e\n\u003cli\u003eSwivels 220°\u003c\/li\u003e\n\u003cli\u003e12 Volt\/50 Watt\u003c\/li\u003e\n\u003cli\u003eTilts Vertically 320°\u003c\/li\u003e\n\u003cli\u003eBuilt-in Transformer\u003c\/li\u003e\n\u003cli\u003eIndependent ON\/OFF\u003c\/li\u003e\n\u003cli\u003eRibbed Aluminum Case\u003c\/li\u003e\n\u003cli\u003eBright, Glare-Free Flood Light\u003c\/li\u003e\n\u003cli\u003eReinforced Glass, Dustproof Design\u003c\/li\u003e\n\u003cli\u003eDesigned for Even Light Distribution\u003c\/li\u003e\n\u003cli\u003eDoes Not Require Saw to Be Turned On\u003c\/li\u003e\n\u003cli\u003eFits 220 volt 14BX Bandsaw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBulb:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHALOSTAR 50 W 12 V GY6.35\u003c\/li\u003e\n\u003cli\u003eHALOSTAR Standard | Low-voltage halogen lamps with pin base\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":22545637179510,"sku":"MBA14BX-LIGHT220-DA","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/14-bx-pro-light-system.jpg?v=1587065877"},{"product_id":"workshop-striking-knife-1","title":"Veritas Workshop Striking Knife","description":"\u003cp\u003eLike pencils, there never seems to be a striking knife at hand when you need it. This high-quality knife is well-priced so you can affordably leave several around your shop.\u003c\/p\u003e\n\u003cp\u003eThe knife has an A2 tool-steel blade with a 55° included angle at the tip. Ground to a keen edge at a 25° bevel angle, it slices wood fibers cleanly. It leaves an incised marking line that serves to guide a saw or chisel when starting a cut, helping to improve accuracy.\u003c\/p\u003e\n\u003cp\u003eIt is particularly useful for the precise transfer work required for dovetail layouts. The dual bevel makes it equally comfortable for right- or left-hand use, or marking either side of a reference surface.\u003c\/p\u003e\n\u003cp\u003eThe nylon-reinforced ABS handle is contoured for a comfortable, controlled grip, with flats on the sides to provide tactile cues for blade orientation and finger placement. They also prevent the knife from rolling on a surface.\u003c\/p\u003e\n\u003cp\u003eSupplied with a guard to protect the tip in storage. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eA2 tool-steel blade has a 55° included angle at tip and is ground to a 25° bevel angle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual bevel makes it equally comfortable for right- or left-hand use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon-reinforced ABS handle is contoured for a controlled grip; has flats for tactile cues\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupplied with a storage guard to protect tip\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOverall length:\u003c\/strong\u003e 6-5\/8\"\u003cbr\u003e\u003cstrong\u003eBlade width:\u003c\/strong\u003e 5\/16\"\u003cbr\u003e\u003cstrong\u003eBlade thickness:\u003c\/strong\u003e Less than 1\/32\"\u003cbr\u003e\u003cstrong\u003eLength of blade from handle:\u003c\/strong\u003e 1-1\/2\"\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":22565099274358,"sku":"05D2005","price":24.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05D2005-1.jpg?v=1670250779"},{"product_id":"cmt-4-piece-bench-block-set","title":"CMT 4 Piece Bench Block Set","description":"\u003cp\u003eThese blocks are great for holding your workpiece without any clamps. Their anti-slip surface grip both your bench top and the underside of your workpiece. Raise your work above the bench and benefit from plenty of clearance for your router bits, cutters, etc.\u003c\/p\u003e\n\u003cp\u003eIncludes 4 blocks.\u003cbr\u003e\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":29053661413494,"sku":"BBS-001","price":16.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/main_ba7862c9-5b8f-4af5-9b1a-9390323d2ed6.jpg?v=1699653007"},{"product_id":"microjig-matchfit-dovetail-clamp-pro","title":"MicroJig Matchfit Dovetail Clamp Pro","description":"\u003cp\u003eThe MATCHFIT Dovetail Clamp Pro includes everything you need to create your own tracks on virtually any surface: (2) MATCHFIT Dovetail Clamps, a MATCHFIT 1\/2\" x 14° Dovetail Router Bit, a Setup Gauge, and Dovetail Hardware Variety Pack.\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Dovetail Clamps are engineered to fit a 3\/8\" deep groove made with the included Dovetail Router Bit. The innovative dovetail clamp arm design allows you to create your own track grooves, enabling you to clamp virtually anywhere. The unique design of the soft-grip handle keeps the clamp head arm contained within the dovetail groove, ensuring your workspace remains clear and functional.\u003c\/p\u003e\n\u003cp\u003eWith MATCHFIT, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.\u003c\/p\u003e\n\u003cp\u003eMaking the 3\/8\" groove is effortless thanks to the included Setup Gauge. It features a convenient router bit template that lets you set the exact depth for dovetail clamp grooves. This versatile gauge also serves as a template to set up a MicroJig Dado Stop (sold separately) for a fast, precise dado cut — no dado blade required!\u003c\/p\u003e\n\u003cp\u003eAlso compatible with Festool \u003ca rel=\"noopener noreferrer\" title=\"All Festool Tables\" href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\"\u003eMultifunction Tables\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecures material anywhere you can route a groove, without getting in the way.\u003c\/li\u003e\n\u003cli\u003eQuickly dials in dovetail router bit’s cutting depth with the Setup Gauge\u003c\/li\u003e\n\u003cli\u003eRoutes dovetail grooves on a jig or work surface\u003c\/li\u003e\n\u003cli\u003eMakes stops and hold-downs that move freely and tighten down anywhere you can route a groove.\u003c\/li\u003e\n\u003cli\u003eSecures material for cutting or assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lbs.\u003cbr\u003e\u003cstrong\u003eClamping Pressure:\u003c\/strong\u003e 595 lbs.\u003cbr\u003e\u003cstrong\u003eRequirements:\u003c\/strong\u003e Any standard 14°-1\/2\" Dovetail Router Bit\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(2) Dovetail Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDovetail Router Bit (1\/2\" Shank)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSetup Gauge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDovetail Hardware Variety (6-Pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AJ2PktnJs6s\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":29398087467126,"sku":"DVC-1177K2","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/DVC-1177K2.jpg?v=1612988835"},{"product_id":"insize-dial-caliper-0-6","title":"Insize Dial Caliper (0 - 6\")","description":"\u003cp\u003eThe Insize Dial Caliper combines the reliability of a traditional dial indicator with the versatility needed for precise measuring tasks. Constructed from durable stainless steel, it is designed to accurately measure outside dimensions, inside dimensions, depths, and step measurements across a range of up to 6\". The shockproof dial helps protect the mechanism from everyday shop use, ensuring dependable performance and long-term accuracy.\u003c\/p\u003e\n\u003cp\u003eA smooth-operating thumb roller allows for precise adjustment and controlled movement along the workpiece, making measurements quick and easy to take. Ideal for machinists, fabricators, woodworkers, and quality-control professionals, this dial caliper delivers accurate, repeatable results without the need for batteries.\u003c\/p\u003e\n\u003cp\u003eFeatures an accuracy of ±0.0015\". Supplied with manufacturer inspection certificate traceable to NIST. Also available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/insize-dial-caliper-0-12\" target=\"_blank\" title='Insize Dial Caliper (0 - 12\") product page' rel=\"noopener\"\u003e0 - 12\" range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Insize","offers":[{"title":"Default Title","offer_id":29512808595574,"sku":"1311-6","price":79.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/DialCaliper6inch.jpg?v=1780497355"},{"product_id":"veritas-narrow-honing-guide-narrow-blade-head-only","title":"Veritas Narrow-Blade Head for Veritas Mk.II Honing Guide System","description":"\u003cp\u003eThe Veritas Narrow-Blade Head is designed to hold narrow blades square to the standard Mk.II honing guide. It works with the straight roller base and angle registration jig.\u003c\/p\u003e\n\u003cp\u003eThis narrow-blade head clamps blades from the sides with parallel jaws to ensure they stay square to the jig. The jaws are also canted to keep blades centered and tight to the reference face of the jig, whether they have beveled or square edges. \u003c\/p\u003e\n\u003cp\u003eIt holds bevel-edged chisels up to 15\/32\" thick and square-edged blades up to 11\/32\" thick. It will even hold chisels that are triangular in cross section.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBlade Width:\u003c\/strong\u003e Accepts blades from 1\/8\" to 1-1\/2\" in width and up to 15\/32\" thick\u003cbr\u003e\u003cstrong\u003eBevel Angles:\u003c\/strong\u003e Hones bevels from 15° to 40°\u003cbr\u003e\u003cstrong\u003eBack Bevel Angles:\u003c\/strong\u003e 10° to 20°\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"Default Title","offer_id":31335033372790,"sku":"05M0909","price":61.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05M09.09-1.jpg?v=1670254550"},{"product_id":"festool-cordless-tid-18-impact-driver-basic","title":"Festool Cordless Impact Driver TID 18 Basic","description":"\u003cp\u003eThe TID 18 Cordless Impact Driver is a compact powerhouse that offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance.\u003c\/p\u003e\n\u003cp\u003eWith its highly powerful new generation brushless EC-TEC motor and exceptionally robust hammer mechanism, the TID 18 is ready for long-lasting use. The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three-speed settings. The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed.\u003c\/p\u003e\n\u003cp\u003eThe perfect ergonomics, compact design, and low machine weight of just\u003cspan\u003e \u003c\/span\u003e3.3\u003cspan\u003e \u003c\/span\u003epounds ensure excellent handling all round including when used for long periods or overhead jobs. The IMPACT principle means that the TID 18 operates without back-torque and only turns the screw, so your wrist is protected from twisting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIdling speed, 1st\/2nd\/3rd gear\u003cbr\u003e\u003c\/span\u003e1st gear: 0 - 1200 RPM\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cbr\u003e\u003c\/span\u003e2nd gear: 0 - 2000 RPM\u003cbr\u003e3rd gear: 0 - 3200 RPM\u003cbr\u003eT-mode: 0 - 3200 RPM (lowering to 750)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eRobust:\u003c\/strong\u003e Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMaximum power:\u003c\/strong\u003e Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSafe:\u003c\/strong\u003e Kickback free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eErgonomic:\u003c\/strong\u003e Compact design enables you to work accurately and for longer periods without becoming tired, even in hard to reach areas\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eConvenient:\u003c\/strong\u003e Tool free 1\/4“ holder, integrated bit storage, optimum LED illumination of the work area, and belt clip for attachment on both sides\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMobile:\u003c\/strong\u003e Packed in a Systainer, the TID 18 can be integrated perfectly into the your Festool system of tool storage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEC TEC Brushless Motor: \u003c\/strong\u003ePowerful, long-lasting, and efficient motor allows for compact and low weight design with exceptional run time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvenient design:\u003c\/strong\u003e Universal, standard quick-release chuck accepts 1\/4” impact-rated bit holders and bits. Optimized design with removable, reversible belt clip and generous magnetic bit storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent power:\u003c\/strong\u003e The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three speed settings. The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinesse:\u003c\/strong\u003e With a long trigger pull you can incrementally adjust the speed to reduce the risk of overdriving screws and fastener\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBattery voltage:\u003c\/strong\u003e 18 V\u003cbr\u003e\u003cstrong\u003eWeight with Li-ion:\u003c\/strong\u003e 3.3 lbs.\u003cbr\u003e\u003cstrong\u003eLi-ion battery capacity:\u003c\/strong\u003e 4.0 Ah\u003cbr\u003e\u003cstrong\u003eGears:\u003c\/strong\u003e 3 + T-Mode\u003cbr\u003e\u003cstrong\u003eMax. torque:\u003c\/strong\u003e 1593.18 in. lbs. (180 Nm)\u003cbr\u003e\u003cstrong\u003eDimensions (without battery pack):\u003c\/strong\u003e 5.2\" x 8.9\" x 3.9\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBelt Clip\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 DF M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QaxpvtAjxJY\"\u003e\u003c\/iframe\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":31652506861686,"sku":"577613","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576480-4_5470db5d-4cb1-431e-a466-b4f4deae1b3f.jpg?v=1754021588"},{"product_id":"sawstop-9-pc-brass-precision-template-guide-set","title":"SawStop 9 pc Brass Precision Template Guide Set","description":"\u003cp\u003eCompatible with most routers, this set supports general routing, dovetailing, and more. Includes 8 template guides for various routing applications: 1 19\/64”, 5\/8”, 27\/32”, 17\/32”, 17\/64”, 9\/32”, 11\/32”, 13\/32”\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eActual dimensions (W x D x H):\u003c\/strong\u003e 6” x 8” x 2”\u003cbr\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All RT\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(8) Template guides for various routing applications: 1 19\/64”, 5\/8”, 27\/32”, 17\/32”, 17\/64”, 9\/32”, 11\/32”, 13\/32”\u003c\/li\u003e\n\u003cli\u003e(1) Locking nut\u003c\/li\u003e\n\u003cli\u003e(1) 3\/8\" Insert Ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SawStop","offers":[{"title":"Default Title","offer_id":31909159862390,"sku":"RT-TGS","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/RT-TGS.jpg?v=1622568654"},{"product_id":"sawstop-single-vertical-feather-board-for-router-table","title":"SawStop Single Vertical Feather Board for Router Table*","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Final sale.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to fit SawStop RT fence miter slots, this vertical feather board provides downward pressure to keep your workpiece in position and help prevent kickback.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds your workpiece safely against the router fence for added stability\u003c\/li\u003e\n\u003cli\u003eEasy-grip lock knobs\u003c\/li\u003e\n\u003cli\u003eCompatible with all SawStop Router Tables and Fences\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (W x D x H):\u003c\/strong\u003e 4” x 7-1\/2” x 2-1\/8”\u003cbr\u003e\u003cstrong\u003eT-slot dimensions (W x D):\u003c\/strong\u003e 1\/2” x 7\/16\"\u003cbr\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All RT\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SawStop","offers":[{"title":"Default Title","offer_id":40128221544647,"sku":"RT-VFS","price":11.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/RT-VFS.jpg?v=1622569962"},{"product_id":"diablo-2-3-4-in-x-5-in-reusable-hand-sanding-block","title":"Diablo 2-3\/4\" x 5\" Reusable Hand Sanding Block","description":"\u003cp\u003eDiablo’s Reusable Hand Sanding Block maximizes sanding performance by enabling professional users to sand flat and contour surfaces with one tool. This premium foam tool includes two sides: cushioned for controlled material removal in contour sanding, and dense for aggressive material removal on flat surfaces.\u003c\/p\u003e\n\u003cp\u003eHook Lock backing allows repeated attachment and removal of \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/diablo-2-3-4-in-x-5-in-sandnettm-reusable-sanding-sheets-10-piece\" target=\"_blank\" title='Diablo 2-3\/4\" x 5\" SandNetTM Reusable Sanding Sheets (10 Pack) product page' rel=\"noopener\"\u003eDiablo SandNET Sheets\u003c\/a\u003e. Included with the Reusable Hand Sanding Block are five SandNET sheets, ranging from coarse\/removal to ultra-fine finish. The reusable SandNET nylon design is easy to clean and reuse multiple times, simply shake, vacuum or rinse to remove any build up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal For:\u003c\/strong\u003e Sanding flat and contour surfaces with one tool.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuggested Projects:\u003c\/strong\u003e Paint Refinishing, Deck Surface Prep and Reconditioning, Floor Refinishing, Wood Furniture Building and Refinishing, and Project Construction.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDual-sided foam block fits comfortably in hand, for consistent results and maximum performance\u003c\/li\u003e\n\u003cli\u003eFirm grip sanding block enables smooth, consistent sanding\u003c\/li\u003e\n\u003cli\u003eCushioned Foam Side for controlled material removal in contour sanding\u003c\/li\u003e\n\u003cli\u003eDense Foam Side for aggressive material removal in flat surface and 90° corner sanding\u003c\/li\u003e\n\u003cli\u003eHook Lock backing enables repeated attachment and removal of SandNET sheets for a consistent secure connection\u003c\/li\u003e\n\u003cli\u003eSandNET clog-reducing nylon design for less dust build-up and up to 10X longer sanding life versus standard sanding sheets\u003c\/li\u003e\n\u003cli\u003eSandNET reusable sanding sheets are easy to clean and reuse; simply shake, vacuum or rinse\u003c\/li\u003e\n\u003cli\u003eIdeal for wet and dry sanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 2-3\/4\" x 5\"\u003cbr\u003e\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\/120\/220\u003cbr\u003e\u003cstrong\u003eGrit blend:\u003c\/strong\u003e Ceramic blend\u003cbr\u003e\u003cstrong\u003eGrit description:\u003c\/strong\u003e Multi-Grade\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 80-Grit for Coarse\/Removal sheets\u003c\/li\u003e\n\u003cli\u003e(2) 120-Grit for Fine\/Final Preparation sheets\u003c\/li\u003e\n\u003cli\u003e(1) 220-Grit for Ultra Fine\/Ultra Fine Finish sheets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QF5wJEN7LMY\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Diablo","offers":[{"title":"Default Title","offer_id":31984183050358,"sku":"DFB234DUOH01G","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/DFB234DUOH01G-1.jpg?v=1672346422"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/gifts-for-any-woodworker\/type_drill-accessories.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}