{"title":"General Finishes","description":"\u003cp\u003eFor innovative water-based and oil-based stains, top coats, and other finishing products, look no further than General Finishes. Their extensive line of finishing needs meet a wide range of projects, from upcycling existing furniture and other wooden materials to raw, made-from-scratch pieces.\u003c\/p\u003e\n\u003cp\u003eSome of their most popular products include Gel Stain (especially Java), High Performance Topcoats, and Milk Paint. Gel Stains are oil-based and can go on top of existing top coats, so there’s no need to completely strip old finishes. High Performance is an all-purpose water-based topcoat finish that is excellent for high use areas like table tops and kitchen cabinets. Milk Paints are also water-based and feature a low-luster sheen which mimics the look of old-world furniture paint.\u003c\/p\u003e","products":[{"product_id":"general-finishes-water-based-wood-stains-quart","title":"General Finishes Water-Based Wood Stains - Quart","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\"Natural\" is a pre-stain conditioner that does not have any colorant. Use it to control blotching on hard-to-stain woods such as maple, pine and cherry before applying a water-based wood stain.\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Water-Based Wood Stains is one of the most advanced interior stains on the market. It provides uniform coverage with brilliant color over raw wood and sealed surfaces. GF Wood Stains use cutting-edge resin and pigment technology to offer DIY consumers and professionals an easy-to-use alternative to traditional oil-based products. They spread easily, can be repaired, can be blended effortlessly, and have plenty of open time.\u003c\/p\u003e\n\u003cp\u003eUsers can easily achieve dark, uniform colors on hard-to-stain woods like pine and maple. These stains can even be used over existing finishes much like an oil-based gel stain. The thicker formula allows controlled penetration, which will reduce blotching on softer woods.\u003c\/p\u003e\n\u003cp\u003eThe high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup, and noncombustible. Looking for a \"green\" environment-friendly finish? These stains are now formulated with more than 50% renewable resources formulated from sustainable materials that decrease the carbon footprint.\u003c\/p\u003e\n\u003cp\u003eSome grain raise is expected when using water‐based stains. Minimize this by wetting wood with water, allowing it to dry, and sanding smooth before staining. After staining and applying the first coat of topcoat, use caution not to sand through topcoat and damage the stain. Finish should be smooth after sanding the second coat of topcoat. You can also create toners by mixing with any General Finishes \u003ca title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-hardware-menu\/brand_general-finishes+type_water-based-top-coats\" target=\"_blank\"\u003eWater-Based Topcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-wood-stains-pint\" title=\"General Finishes Water-Based Wood Stains - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip\u003c\/strong\u003e: Do not apply with a rag or cloth. If stain is drying too quickly, apply more stain to re-wet the surface. For deeper color, a 2nd coat can be applied after the 1st coat has dried completely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Water-Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.1 mm-1.3 mm\u003cbr\u003e\u003cstrong\u003eTopcoat required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry time - touch:\u003c\/strong\u003e  Raw Wood (30+ min.), Existing Finish (1+ hr.)\u003cbr\u003e\u003cstrong\u003eDry time - recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - recoat (applied over oil-based product):\u003c\/strong\u003e 24 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e100-150 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eExisting finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eAvoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320-grit) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of General Finishes Pre-Stain Conditioner Natural can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want. NOTES on softwoods such as Pine, Pawlonia, or Poplar, the use of Pre-Stain Conditioner will reduce blotchiness but not remove it entirely.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHand-application\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or microfiber roller. Work quickly.\u003c\/li\u003e\n\u003cli\u003eIf not enough stain is used, the surface may dry too quickly, causing an uneven appearance.\u003c\/li\u003e\n\u003cli\u003eOn large projects, leave a wet edge between sections to prevent lap lines until you can wipe all the excess off.\u003c\/li\u003e\n\u003cli\u003eStain one complete section at a time.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using cloth or an absorbent paper towel. Check for missed spots and lap marks before moving to the next section.\u003c\/li\u003e\n\u003cli\u003eDo NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eAnother coat will make the color darker but do not exceed two coats as that will create too much build of a low solids finish. Stains are designed to provide color but are not durable on their own.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions when using a WATER-BASED topcoat: 50-70% humidity, 70*F\/20*C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. When using with an OIL-BASED topcoat, allow 24 hours dry time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/batgtzeb9QM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Bdb301Mj084\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique Brown","offer_id":29437461856374,"sku":"WAQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Antique Oak","offer_id":21935892627574,"sku":"WOQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":21935892660342,"sku":"WBQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black Cherry","offer_id":21935892693110,"sku":"WKQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":21935892725878,"sku":"WYQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Cabernet","offer_id":29437461921910,"sku":"WZQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Espresso","offer_id":21935892824182,"sku":"WXQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Graphite","offer_id":29437461987446,"sku":"WJQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Graystone","offer_id":29437462380662,"sku":"WQQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Hickory","offer_id":29437462675574,"sku":"WHQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":21935892889718,"sku":"WNQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Onyx","offer_id":29437462741110,"sku":"WFQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pecan","offer_id":21935892922486,"sku":"WPQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Provincial","offer_id":29437462839414,"sku":"WVQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Sedona","offer_id":29437463068790,"sku":"WSQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Tobacco","offer_id":29437463199862,"sku":"WTTQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Walnut","offer_id":21935893020790,"sku":"WWQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Whitewash","offer_id":21935893053558,"sku":"WIQT","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/woodstain-quart.jpg?v=1704729237"},{"product_id":"general-finishes-water-based-dye-stains-pint","title":"General Finishes Water-Based Dye Stains - Pint","description":"\u003cp\u003eGeneral Finishes Dye Stain is a water-based stain known for its deep color and ability to make wood grain pop. The rich tones enhance the grain and produce vibrant colors, especially on highly figured woods like cherry, walnut, and maple. Dye stains can also be used as a toner when mixed with \u003ca rel=\"noopener\" title=\"All General Finishes Water-Based Top Coats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_water-based-top-coats\" target=\"_blank\"\u003eGeneral Finishes Water-Based Top Coats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDye Stains are excellent to use on wood with a beautiful grain or pattern that you want to show off. They are like ink in that they penetrate deep into the wood grain, revealing the full figure of the wood with a stunning transparency. Dye Stains are also a great way to layer and intensify color. Using a light color like Amber or Yellow under a darker stain, like Java Gel Stain, creates a nice depth and glow on any workpiece.\u003c\/p\u003e\n\u003cp\u003eThis versatile product can also be used as a toner to gradually deepen the color on a project. You can achieve this by mixing a Dye Stain with a GF Water-Based Top Coat in a 1:4 ratio. Once mixed, the toner can be applied with a foam brush (followed by using a dry bristle brush for detailed wood), or sprayed!\u003c\/p\u003e\n\u003cp\u003eIt is also possible to make your own custom color by combining Dye Stains with \u003ca rel=\"noopener\" title=\"General Finishes Dye Stain Reducer - Pint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/gf-dye-reducer\" target=\"_blank\"\u003eGF Dye Stain Reducer\u003c\/a\u003e. Simply add Dye Stain in 10% increments to Reducer until you achieve the color you want. Any percentage of stain or reducer can be added, giving you a wide range of color options to fine-tune your finish.\u003c\/p\u003e\n\u003cp\u003eRecommended for interior raw surfaces such as cabinets, trim, doors, and furniture. Always seal General Finishes Dye Stain with 3 coats of any GF Water-Based Top Coat. More coats will not improve durability. \u003cspan\u003eColor swatches are on Oak.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e\u003c\/span\u003e Water pop your workpiece before applying dye stain to reduce any raised grain effect.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives product page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote:\u003c\/span\u003e Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1 - 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Pad Applicator, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat - Applied Over Oil Based Product:\u003c\/strong\u003e 24 hours\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 60-80 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Very Thin\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePreparation\u003c\/span\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eSand open-grain wood (e.g. oak, ash, mahogany) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSand closed-grain wood (e.g. cherry, pine, maple, birch) with 150-grit sandpaper followed by 220-grit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do not over-sand with fine-grit sandpaper—this will close and seal the grain, preventing ideal color absorption. Do not use steel wool with water-based finishes.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDirections\u003c\/span\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eStir stain thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eTest your entire finishing schedule first. Dye Stain is like ink, and once you apply it, there is no going back as it will sink into the pores of the wood.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDivide your project into manageable sections.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUsing a synthetic bristle brush, foam brush, pad applicator, or microfiber roller, apply a liberal amount of dye stain. Apply 1-2 coats, working quickly. A second coat will create a deeper, richer color. Do not apply more than 2 coats. Use a light touch with the brush. Dye Stain penetrates the surface fast; if not enough stain is used, the surface may dry too quickly, causing an uneven appearance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStain one section at a time. Immediately wipe off excess evenly with the grain using a cloth or high quality paper towel before starting the next section.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDry 2+ hours between coats in ideal conditions: 70°F\/20°C; 50-70% humidity. Inadequate dry time is one of the top reasons for finish failure. If in doubt, wait longer. Increase dry time if \u003c\/span\u003ehumidity is over 80% or two coats are used.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTo accelerate drying in humid conditions, add General Finishes Accelerator and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllow final coat to dry 2-4 hours in ideal conditions: 50-70% humidity, 70°F\/20°C.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish with 3 coats of General Finishes Topcoat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIf you will be using GF Conversion Varnish as a topcoat, seal first with either GF Sanding Sealer or Clear Poly before spraying Conversion Varnish. This will minimize the reaction from the dye and catalyst.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAllow final coat to dry 2-4 hours in ideal conditions. Finish with 3 coats of \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/stains-paints-finishes\/brand_general-finishes\" title=\"All General Finishes Stains, Paints \u0026amp; Finishes\" target=\"_blank\"\u003eGeneral Finishes Topcoat\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eIf you will be using GF \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-conversion-varnish-satin-gallon\" title=\"General Finishes Conversion Varnish product page\" target=\"_blank\"\u003eConversion Varnish\u003c\/a\u003e as a topcoat, seal first with either GF \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" title=\"General Finishes Enduro Sanding Sealer product page\" target=\"_blank\"\u003eSanding Sealer\u003c\/a\u003e or Clear Poly before spraying Conversion Varnish. This will minimize the reaction from the dye and catalyst.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0wopU1L1X0w\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Amber","offer_id":5715555205,"sku":"DPA","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":21863792246902,"sku":"DPB","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Cinnamon","offer_id":21863792279670,"sku":"DPC","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Dark Brown","offer_id":21863792312438,"sku":"DPD","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Ebony","offer_id":21863792377974,"sku":"DPE","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Empire Red","offer_id":21863792410742,"sku":"DPR","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":21863792476278,"sku":"DPG","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Light Brown","offer_id":21863792541814,"sku":"DPL","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Medium Brown","offer_id":21863792574582,"sku":"DPM","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Merlot","offer_id":21863792607350,"sku":"DPT","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":21863792640118,"sku":"DPO","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Pewter","offer_id":40632634736839,"sku":"DPP","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Vintage Cherry","offer_id":21863792672886,"sku":"DPV","price":19.6,"currency_code":"USD","in_stock":true},{"title":"Yellow","offer_id":21863792705654,"sku":"DPY","price":19.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Pint.jpg?v=1672425472"},{"product_id":"gf-dye-reducer","title":"General Finishes Dye Stain Reducer - Pint","description":"\u003cp\u003eDye Stain Reducer is the clear base used when manufacturing \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/gf-water-based-dye\" title=\"General Finishes Dye Stains product page\" target=\"_blank\"\u003eGeneral Finishes Dye Stain\u003c\/a\u003e and can be used to make custom Dye Stain colors and for toning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreating A Custom Color\u003cbr\u003e\u003c\/strong\u003eAdd 10% increments of Dye Stain Reducer to \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/stains-menu\/brand_general-finishes\" target=\"_blank\" title=\"All General Finishes Stains\" rel=\"noopener noreferrer\"\u003eGeneral Finishes Dye Stain or General Finishes Water Based Wood Stain\u003c\/a\u003e until you achieve your desired color. Any percentage of stain or reducer can be added.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDye Stain Reducer will lighten the color and thin the viscosity of stain.\u003c\/li\u003e\n\u003cli\u003eDye Stain Reducer will cause Water Based Wood Stain to penetrate deeper into the wood.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUsing Dye Stain as a Pre-Stain Conditioner\u003cbr\u003e\u003c\/strong\u003eControl even penetration of Dye Stain by applying a coat of Dye Stain Reducer over raw wood before using Dye Stain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry Time\u003cbr\u003e\u003c\/strong\u003eDry 2+ hours between coats \u0026amp; before GF water-based stain or topcoat in ideal conditions: 70°F\/20°C; 50-70% humidity. Cooler temperatures \u0026amp; higher humidity may prolong dry time. Dry 24+ hours before applying GF oil-based products.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Water Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 60-80 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Very Thin\u003c\/p\u003e\n\u003ch5\u003eStorage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePry open sealed lids with a paint can opener by hooking under the lid's rolled edge. The use of a screwdriver can disfigure the rim and lid, impairing a complete seal.\u003c\/li\u003e\n\u003cli\u003eKeep lid closed while working. Pour what you will use into a bowl, paper cup, or plate, and close can lid as you work.\u003c\/li\u003e\n\u003cli\u003eClean the chime of the can thoroughly with a paper towel before closing to create a complete seal. Paint in the chime can be minimized by using a pouring lid, such as Fitsall. Avoid wiping used brushes on the lid.\u003c\/li\u003e\n\u003cli\u003ePound the lid in place using a rubber mallet to avoid distorting the chime or lid. Dents in the lid from direct contact with a hammer can impair a complete seal. Alternatively, place a flat piece of wood over can lid and firmly pound shut.\u003c\/li\u003e\n\u003cli\u003eStore in moderate temperatures. Avoid temperatures below 50°F\/10°C or above 100°F\/26°C. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.\u003c\/li\u003e\n\u003cli\u003eStore can upside down to create a liquid seal, minimize evaporation and reduce the chance of crystallization. Decant remaining product from the can before stirring.\u003c\/li\u003e\n\u003cli\u003eDecant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":5715556229,"sku":"DPU","price":19.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/reducer-pint.jpg?v=1672430721"},{"product_id":"gf-high-performance","title":"General Finishes Water-Based High Performance Topcoats - Quart","description":"\u003cp\u003eHigh Performance is an all-purpose water-based topcoat finish for residential interior woodworking projects. With excellent all-around durability, it is designed for the DIY user or contractor who wants a professional-grade finish that is designed to be brushed, roller, or sprayed. High Performance is the best choice for high use areas such as table tops and kitchen cabinets. \u003c\/p\u003e\n\u003cp\u003eRecommended for interior cabinets, trim, doors, and furniture. Use over raw wood, stain, and non-white painted surfaces. Suitable for floors. \u003c\/p\u003e\n\u003cp\u003eDo not use High Performance or any other clear coat, over white or light paints such as Milk Paint or White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of General Finishes' White Paints, brush-able or spray versions, do not require a topcoat.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-pint\" title=\"General Finishes Water Based High Performance Topcoats - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epints\u003c\/a\u003e, \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoat-gallon\" title=\"General Finishes Water Based High Performance Topcoats - Gallon product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003egallons\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-5-gallon\" target=\"_blank\" title=\"General Finishes Water-Based High Performance Topcoats - 5 Gallon product page\" rel=\"noopener\"\u003e5 gallon pails\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e \u003cspan\u003eand \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTint-able:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 125-150 sq. ft. per quart\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320 grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNewly stained surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDo not sand.\u003c\/li\u003e\n\u003cli\u003eApply directly to the stained surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of High Performance. More coats will not improve durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, staining pad or roller such as Whizz or AllPro Velour brand. Avoid pressure and excessive back brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks dry - they WILL tighten down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our general guide for spray tip sizes. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space. Read here for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames and drawers on cabinets:\u003c\/strong\u003e High Performance can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of High Performance Topcoat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Sheens:\u003c\/strong\u003e You mix can High Performance Topcoat sheens to adjust your sheen. For example, you can mix High Performance Flat and High Performance Gloss to obtain a different sheen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/fSAm4rsj6N8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":21863793655926,"sku":"QTHF","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":21863793688694,"sku":"QTHS","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":21863793721462,"sku":"QTHSG","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":21863793754230,"sku":"QTHG","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Dead Flat","offer_id":43914953588953,"sku":"B745-L Quart","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/High-Performance-Topcoat-Quart-Flat.jpg?v=1628612345"},{"product_id":"general-finishes-water-based-flat-out-flat-topcoat-quart","title":"General Finishes Water-Based Flat Out Flat Topcoat - Quart","description":"\u003cp\u003eFlat Out Flat is a \"dead-flat\" finish for anyone wanting a very low-sheen appearance on their project. It mimics the waxed look of chalk-style paint. Because of its natural properties, it is not recommended for medium- or high-use pieces like furniture or cabinets.\u003c\/p\u003e\n\u003cp\u003eWant to improve the performance of your finish and still obtain a matte sheen? Use a semi-gloss sheen for the first 2 coats and a flat for the third for optimum performance. Alternatively, use \u003ca rel=\"noopener\" title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_water-based-top-coats\" target=\"_blank\"\u003eHigh Performance Water-Based Topcoat\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"All General Finishes Oil-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_oil-based-top-coats\" target=\"_blank\"\u003eArm-R-Seal Oil Based Topcoat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-gallon\" target=\"_blank\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Gallon product page\" rel=\"noopener\"\u003egallons\u003c\/a\u003e and \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Pint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-pint\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Very Flat (1-5)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Self-crosslinking Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 125-150 sq. ft. per quart\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Low\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. No more than three coats is recommended. Additional coats will not improve durability. Flat Out Flat contains more matting agents to decrease the sheen, and the finish can get cloudy when excessive topcoats are applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure and back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of Flat Out Flat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, oil-free tack cloth, or clean water-dampened rag before re-coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":21863796670582,"sku":"FQT","price":41.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Flat-out-Flat-Quart.jpg?v=1672414005"},{"product_id":"general-finishes-glazes","title":"General Finishes Water-Based Glaze Effects - Quart","description":"\u003cp\u003eGlaze Effects are translucent water based colors used to create beautiful decorative finishes such as distressing, marble, shabby chic, burnishing, color washing, rag rolling and wood graining.\u003c\/p\u003e\n\u003cp\u003eUse over \u003ca title=\"General Finishes Water-Based Wood Stains product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/gf-water-based-stain\" target=\"_blank\"\u003eWater-Based Wood Stains\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-milk-paint\" title=\"General Finishes Milk Paint product page\" target=\"_blank\"\u003eMilk Paints\u003c\/a\u003e. Glaze Effects can be inter-mixed or layered to create custom colors. They may also be layered over one another to create deeper, richer looks. It is highly recommended to utilize Extender to increase open time and workability.\u003c\/p\u003e\n\u003cp\u003eTo lighten, dilute with General Finishes Glaze Effects Clear Base.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eNot recommended for raw wood application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Glaze\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.3mm-2.0mm\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 3+ hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 120-160 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eNewly sealed\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand lightly with 220-320 grit foam sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExisting sealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite pad or maroon synthetic steel wool \u0026amp; 50\/50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320 grit foam sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cp\u003eFor less color \u0026amp; more control of depth and placement of glaze color, apply Glaze Effects over 1 coat of General Finishes High Performance Topcoat, any sheen. For a deeper color, apply directly over stain or paint. Test for adhesion over existing finishes before completing the project.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest color. To lighten, dilute with water based GF Glaze Effects Clear Base.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 1+ coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal coat using a synthetic bristle brush, foam brush, pad applicator, staining pad or microfiber roller with smooth, even strokes. Wipe off excess with a cloth, high-quality absorbent paper towel or dry bristle brush. Do not use t-shirts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Strain with a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.3mm-2.0mm spray tip, medium air cap. Verify tip sizes with equipment supplier. See our general guide for spray tip sizes. Wear NIOSH-approved respiratory \u0026amp; eye protection. Read here for more information on spraying techniques. Wipe off excess with a cloth, high-quality absorbent paper towel or dry bristle brush. Do not use t-shirts.\u003c\/li\u003e\n\u003cli\u003eSand between coats with 220-320 grit foam sanding sponge. Do not use conventional steel wool. Remove dust.\u003c\/li\u003e\n\u003cli\u003eSeal with 3 coats of topcoat.\u003c\/li\u003e\n\u003cli\u003eDry 3+ hours between coats and before GF water based topcoat in ideal conditions: 70°F\/21°C; 50% humidity. Dry times may vary based on additive and mix-concentration used. Cooler temperatures \u0026amp; higher humidity may prolong dry time. Dry 24+ hours before applying GF oil-based products.\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eA thick coat is applied\u003c\/li\u003e\n\u003cli\u003e3+ coats are applied (not recommended)\u003c\/li\u003e\n\u003cli\u003eApplying over an existing sealed finish\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hr before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hr before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e Water-based finishes cure and harden for full use after 21 days in ideal conditions. Avoid placing heavy objects on surfaces that have not completely cured. Treat gently, and do not clean with commercial products during the curing period.\u003c\/li\u003e\n\u003cli\u003eALWAYS seal General Finishes Glaze Effects with 3 coats of clear topcoat, e.g. General Finishes High Performance Topcoat. Apply a total of 3+ coats of topcoat altogether. If 1 coat of topcoat is applied before Glaze Effects, add at least 2 more coats over the glaze to seal in the color.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3jifX-ZCHDI\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Burnt Umber","offer_id":7271479173,"sku":"QTBU","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Clear Base","offer_id":21863795622006,"sku":"QTCB","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Pitch Black","offer_id":21863795654774,"sku":"QTPB","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Smokey Gray","offer_id":40284383084743,"sku":"QTSG","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Van Dyke Brown","offer_id":21863795720310,"sku":"QTVDB","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Winter White","offer_id":21863795753078,"sku":"QTWW","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Glaze-quart.jpg?v=1672432681"},{"product_id":"general-finishes-gel-stains-quart","title":"General Finishes Gel Stains - Quart","description":"\u003cp\u003eGeneral Finishes Gel Stain is a great way to upcycle furniture and cabinets. The Gel Stain is very thick and resists runs and drips so you can easily stain existing cabinetry.  Gel stain can go on top of existing top coats so there is no need to completely strip old finishes. \u003c\/p\u003e\n\u003cp\u003eGel wood stains are heavy-bodied and do not penetrate as deeply into the wood as liquid oil-based wipe-on stains do, providing the deepest, richest colors of any oil-based stain available. Color swatches shown on Maple.\u003c\/p\u003e\n\u003cp\u003eThe following materials will be needed to prep and refinish cabinetry with Gel Stain:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cleaning product, such as dish soap\u003c\/li\u003e\n\u003cli\u003e50:50 mix of water and denatured alcohol\u003c\/li\u003e\n\u003cli\u003eGreen \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/final-stripping-pads-2-pack\" title=\"Diablo Stripping Pads (2 Pack) product page\" rel=\"noopener\" target=\"_blank\"\u003estripping pad\u003c\/a\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/final-stripping-pads-2-pack\" title=\"Diablo Final Stripping Pads (2 Pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e400 grit \u003ca rel=\"noopener\" title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e or 220 grit foam \u003ca rel=\"noopener\" title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esanding pad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-sticky tac cloth to remove dust from sanding or water dampened rag\u003c\/li\u003e\n\u003cli\u003e(2) \u003ca title=\"Jen Poly Foam Brushes\" href=\"https:\/\/www.oaktreesupplies.com\/products\/jen-poly-foam-brushes\"\u003eFoam brushes\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlue Shop Towels\u003c\/li\u003e\n\u003cli\u003ePainters Tape\u003c\/li\u003e\n\u003cli\u003eA top coat (such as \u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/gf-high-performance\" target=\"_blank\" title=\"General Finishes High Performance Topcoat\" rel=\"noopener\"\u003eGeneral Finishes High Performance Water-Based Top Coat\u003c\/a\u003e\u003ca title=\"General Finishes High Performance Topcoat\" href=\"https:\/\/www.oaktreesupplies.com\/products\/gf-high-performance\"\u003e\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-gel-stains-pint\" title=\"General Finishes Gel Stains - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e Raw Wood (8+ hrs.), Existing Finish wipe-off (12-24+ hrs.),\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e Raw Wood (12-24 hrs.), Existing Finish wipe-off (72+ hrs.)\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat - Applied Over Water Based Product:\u003c\/strong\u003e 72 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 150-200 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Very Thick\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePrep sand with 120-grit sandpaper followed by 150-grit sandpaper. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet dry completely before applying General Finishes product. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eScuff clean with a Scotch Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry 1-2 hours.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSand lightly with a 220-320-grit foam sanding sponge.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet dry completely before applying General Finishes product.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDry Brushing Over an Existing Finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTest your complete finishing process before starting. The stain color is affected by variances in wood and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eApply stain with a natural bristle brush or foam brush. Go in the direction of the grain.\u003c\/li\u003e\n\u003cli\u003eFeather out uneven areas and pull excess stain from corners using a bristle brush. Discharge accumulated stain from the brush onto a paper towel soaked with mineral spirits as you work.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 72+ hours in ideal conditions: 70°F\/20°C, 50% humidity. You can tell if an oil-based finish is dry if it is no longer tacky, and cool to the touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional:\u003c\/strong\u003e Apply a second coat to deepen the color. Apply no more than 2 coats.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/vGMJWz3mnEo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"American Oak","offer_id":21863797620854,"sku":"OQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Antique Walnut","offer_id":21863797653622,"sku":"AQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Ash Gray","offer_id":29437527261302,"sku":"AQT","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":21863797686390,"sku":"BLQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":21863797719158,"sku":"BQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Candlelight","offer_id":21863797751926,"sku":"CQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Carbon Grey","offer_id":31454420992118,"sku":"CQT","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Colonial Maple","offer_id":21863797784694,"sku":"CMQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Georgian Cherry","offer_id":21863797817462,"sku":"GCQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":21863797850230,"sku":"GRQ","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Java","offer_id":21863797588086,"sku":"JQ","price":56.5,"currency_code":"USD","in_stock":true},{"title":"New Pine","offer_id":21863797882998,"sku":"NPQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Nutmeg","offer_id":21863797915766,"sku":"NQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Prarie Wheat","offer_id":21863797948534,"sku":"PQ","price":45.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":29437519167606,"sku":"WQA","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/gelstain-quart.jpg?v=1672431117"},{"product_id":"general-finishes-exterior-450-topcoat","title":"General Finishes Water-Based Exterior 450 Topcoats - Quart","description":"\u003cp\u003eExterior 450 Topcoat is a clear-drying, low VOC finish suitable for vertical exterior surfaces, such as fences, patio furniture, garage doors, and entrance doors. It is fortified with UV absorbers to stabilize and protect the integrity of the finish. Built-in mildewcides slow mold and mildew growth. It performs well as a clear coat or as an optional topcoat over darker color General Finishes Milk Paint. Do not use over light or white paints as yellowing may occur.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Exterior 450 Topcoat is not intended for decks. It can be used on tabletops that do not receive direct exposure to sun and rain. As with all fine furniture finishes, wipe up spills in a timely manner to protect the finish. Do not use Exterior 450\u003cem\u003e \u003c\/em\u003eor any other clear coat over white or light paints such as \u003cem\u003eGF Milk Paint,\u003c\/em\u003e or \u003cem\u003eGF White Poly,\u003c\/em\u003e as it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-exterior-450-topcoats-5-gallon\" target=\"_blank\" title=\"General Finishes Water-Based Exterior 450 Topcoats - 5 Gallon product page\" rel=\"noopener\"\u003e5 gallon pails\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-exterior-450-topcoats-gallon\" target=\"_blank\" title=\"General Finishes Water-Based Exterior 450 Topcoats - Gallon product page\" rel=\"noopener\"\u003egallons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp;ampAbrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Exterior\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 - 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 140-160 sq. ft. per quart\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e120-grit sandpaper followed by 150-grit or 220-grit sandpaper. Do not over-sand with fine-grit sandpapersthis will close and seal the wood grain, preventing ideal color absorption. Also, do NOT use steel wool on water-based based finishesthe particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes Exterior 450.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp;amp50:50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320 grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNewly stained surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDo not sand.\u003c\/li\u003e\n\u003cli\u003eApply directly to stained surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir topcoat to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled waterstart with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of Exterior 450. No more than three coats is recommended. More coats will not improve durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator or roller. Avoid pressure and excessive back-brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks drythey WILL tighten down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 sanding sponge to improve smoothness and adhesion. Do not use steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":11317669317,"sku":"QXF","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":21863796473974,"sku":"QXS","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":21863796506742,"sku":"QXSG","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":21863796539510,"sku":"QXG","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Exterior-450-Topcoat-Flat.jpg?v=1628604014"},{"product_id":"general-finishes-milk-paints-quart","title":"General Finishes Milk Paints - Quart","description":"\u003cp\u003eGeneral Finishes Milk Paints are premium acrylic, water-based paints named for their low-luster sheen which mimics the look of old-world furniture paint. Not a true \"casein based milk paint\" but a modern version of old world paint with a strong mineral base. It is adaptable and UV resistant and may be applied by brushing or spraying and possesses excellent flow and leveling properties. Milk paints are formulated with zero-VOC colorants and pre-mixed for your convenience. They can be used on interior or exterior projects without a topcoat, including raw wood, pre-finished wood, and fiberglass.\u003c\/p\u003e\n\u003cp\u003eYou can mix it, lighten it, distress it, glaze it, layer different colors or antique it - perfect for upcycling or repurposing furniture.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-milk-paints-pint\" title=\"General Finishes Milk Paints - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e \u003c\/span\u003eDo not use water-based products with Linseed Oils or Danish Oils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat low luster (10-15)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic Paint\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.8mm-2.0mm\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Self-Sealing\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat\u003c\/strong\u003e: 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100-125 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 2,000-3,000\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSanding schedule: 120-grit sandpaper followed by 150-grit. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption. Do not use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a Scotch Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir paint to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume. Do not use flowing agents such as Floetrol. This paint already contains a flow agent and outside products may not be compatible.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. \u003c\/li\u003e\n\u003cli\u003eApply as many coats as needed for desired coverage. 2-3 coats are standard but additional coats may be required when using colors with less \"hide properties,\" such as bright reds, greens, yellows and whites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Using a synthetic bristle brush, foam brush, pad applicator, or microfiber roller such as Whizz or AllPro brand, apply using smooth, even strokes.\u003cbr\u003e\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8 mm-2 mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection.\u003cbr\u003e\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Milk Paint can be applied successfully to cabinet face frames, edges or drawer fronts with a brush, pad or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats and before General Finishes water-based topcoat in ideal conditions: 70°F\/20°C; 50-70% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing dry time can cause clouding\/blush in topcoat due to moisture trapped between coats.\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if humidity is over 80%, 3+ coats are applied, thick coats are applied, applying over an existing sealed finish, applying over products from other brands, or layering General Finishes water- and oil-based products.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0slo3c8TmD8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique White","offer_id":21863789854838,"sku":"QAW","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Basil","offer_id":31925850833014,"sku":"QBA","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Coastal Blue","offer_id":31925852373110,"sku":"QCB","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Dark Chocolate","offer_id":31925852471414,"sku":"QDC","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Lamp Black","offer_id":21863790018678,"sku":"QLB","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Linen","offer_id":21863790084214,"sku":"QLI","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Perfect Gray","offer_id":40633282396359,"sku":"QPGY","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Persian Blue","offer_id":40633282429127,"sku":"QPB","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Queenstown Gray","offer_id":40633282494663,"sku":"QQG","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Seagull Gray","offer_id":21863790149750,"sku":"QSGG","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Snow White","offer_id":21863790248054,"sku":"QSW","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Tuscan Red","offer_id":32063394644086,"sku":"QTTR","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/milkpaint-quart.jpg?v=1672431904"},{"product_id":"general-finishes-woodturners-finish","title":"General Finishes Woodturners Finish - 8 oz.","description":"\u003cp\u003eWood Turner's Finish is a water-oil urethane hybrid for use on wood turnings, bowls and other lathe-turned projects. It is made with more than 50% renewable resources and formulated from sustainable materials that decrease the carbon footprint. This water-based wood finish produces a slight amber tone and dries to recoat in minutes. Because of its unique chemistry, Wood Turner’s Finish is best used as a standalone product on raw wood or over General Finishes Water-Based Stains.\u003c\/p\u003e\n\u003cp\u003eWood Turners Finish has a little bit of an amber cast to it, so it's perfect for woods like mahogany, walnut, and cherry. Wood Turners Finish should not be tinted.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Appears slightly pink in the the bottle. Dries to an amber tone.\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Hybrid Oil\/Water Urethane\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSheen Gloss:\u003c\/strong\u003e (80+)\u003cbr\u003e\u003cstrong\u003eDry Time: \u003c\/strong\u003eBetween heavier coats in ideal conditions (70°F\/20°C; 50% humidity)\u003cbr\u003e\u003cstrong\u003eDry Time (Lathe):\u003c\/strong\u003e 10+ minutes\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil-modified Urethane\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 38 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eAlways ensure the surface is clean of contaminants and dust.\u003c\/li\u003e\n\u003cli\u003eEnsure any freshly stained surface has dried thoroughly and completely.\u003c\/li\u003e\n\u003cli\u003eSand with no finer than 400 grit. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.\u003c\/li\u003e\n\u003cli\u003eDo not use Sanding Sealer or shellac under Wood Turner’s Finish.\u003c\/li\u003e\n\u003cli\u003eWipe oily exotic woods with acetone prior to using Wood Turner’s Finish.\u003c\/li\u003e\n\u003cli\u003eDo NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir topcoat to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003e3+ coats recommended. The number of coats will vary by application technique and personal preference.\u003c\/li\u003e\n\u003cli\u003eApply with a synthetic bristle or foam brush, staining pad, rag\/towel or spray with HVLP airbrush.\u003c\/li\u003e\n\u003cli\u003eIf desired, thin with distilled water.\u003c\/li\u003e\n\u003cli\u003eFor more open time, add General Finishes Extender. Start with 5%, increase up to 15% by volume.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad, 400-grit sandpaper or gray non-woven pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/XGKrC9_9Bjo\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":25002745737,"sku":"8WTF","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/wood-turners-finish.jpg?v=1628175880"},{"product_id":"general-finishes-water-based-pre-cat-lacquer-gallon","title":"General Finishes Water-Based Pre-Cat Lacquers - Gallon","description":"\u003cp\u003e\u003cstrong\u003ePackaging may vary.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Water-Based Enduro Pre-Cat Lacquer clear-drying wood finish uses new technology in the polymer manufacturing process. This unique formula produces a smaller and smoother particle, which translates into a big increase in film clarity. The chemical, water, and yellowing resistance are superior to competitors, waterborne or solvent. With superior block resistance and the ability to pack or stack after 12 hours of drying at a great price point, this is the perfect professional coating when fast production time is needed.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cb\u003eCaution\u003c\/b\u003e:\u003c\/span\u003e Do not use GF Enduro Pre-Cat Lacquer or any other clear coat, over white or light paints such as GF Milk Paint, or GF White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes, causing tannin or dye bleed-though regardless of priming. All of GF's white paints do not require a topcoat. Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType: \u003c\/strong\u003eSelf-crosslinking Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 10+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 1+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 350-450\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir topcoat thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing sealed surface.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% by volume General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the product non-compliant per SCAQMD Regulations. \u003c\/li\u003e\n\u003cli\u003eReady to spray from container. Apply a minimum of 3 coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Fluid tip sizes: Compressed air: .040, HVLP: .043-.051 or Airless: .009-.013. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a mask and work in a ventilated space. Read here for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Enduro professional products are engineered to be spray-only but can be successfully applied to cabinet face frames or edges with a pad or small, cabinet-specific roller such as Whizz Velour brand. Larger areas may not level with a hand application. ALTERNATIVE: Use the same sheen of General Finishes \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/gf-high-performance\" title=\"General Finishes Water Based High Performance Topcoat product page\" target=\"_blank\"\u003eHigh Performance Topcoat\u003c\/a\u003e on areas that must be brushed.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired using clears over raw wood, use General Finishes \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" title=\"General Finishes Enduro Sanding Sealer product page\" target=\"_blank\"\u003eSanding Sealer\u003c\/a\u003e for the first 1-2 coats, followed by 2 coats of Pre-Cat Lacquer.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":32222950537,"sku":"GPCF","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":21863789068406,"sku":"GPCS","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":21863789101174,"sku":"GPCSG","price":96.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":21863789133942,"sku":"GPCG","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Flatgal.jpg?v=1672423944"},{"product_id":"general-finishes-enduro-sanding-sealer-quart","title":"General Finishes Enduro Sanding Sealer - Quart","description":"\u003cp\u003eGeneral Finishes Enduro Sanding Sealer is a clear, water-based acrylic undercoat with strong adhesion that forms an easily sand-able foundation for your project. It provides initial sealing for all water based topcoats and can be used over raw wood or a stained surface. This fast-drying pre-catalyzed sealer is designed as a basecoat for General Finishes topcoats. It's high solids content builds a fast film. Engineered for cabinets \u0026amp; millwork, it can be brushed, rolled, or sprayed. Dries tack-free in 5-10 minutes in ideal conditions.\u003c\/p\u003e\n\u003cp\u003eThere are four benefits to using sanding sealer as the first seal coat prior to topcoat:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFaster production time. Sanding sealer is a softer finish designed for faster sanding and faster drying.\u003c\/li\u003e\n\u003cli\u003eSave money - it costs less than topcoat if your project warrants purchasing a third product.\u003c\/li\u003e\n\u003cli\u003eThe film builds (thickness) faster because the particle size is larger.\u003c\/li\u003e\n\u003cli\u003eIt has strong adhesion properties. It does not stop tannin or dye bleed through, but it definitely improves adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHowever, it only makes sense if your project is large enough to warrant the purchase of a third product or you are a professional volume user. Sanding Sealer is not as durable as General Finishes topcoats, so it is not recommended for a final finish.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-gallon\" title=\"General Finishes Enduro Sanding Sealer - Gallon product page\" rel=\"noopener\" target=\"_blank\"\u003egallons\u003c\/a\u003e. Don't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1 - 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP- .043-.051 Medium Air Cap\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100-125 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium, 350-450 cPs\u003cbr\u003e\u003cstrong\u003eVOC: \u003c\/strong\u003e\u0026lt;250 g\/L\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Medium\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir Enduro Sanding Sealer thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 1-2 coats. We recommend no more than 2 coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Enduro Sanding Sealer is engineered to spray but can be applied successfully applied by hand. Apply a liberal amount using a synthetic bristle or foam brush, pad applicator, or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure \u0026amp; back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray Application:\u003c\/strong\u003e Ready to spray from container. Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: .040, HVLP: .043-.051 or Airless: .009-.123 . Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space. Finish sand between coats with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil free tack cloth or water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eApply topcoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/sJFmDa9K1KY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":32659574345,"sku":"SSSS","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/sandingsealerQuart_e254b008-c0ec-41b4-b8f1-d4cfbc35e668.jpg?v=1737475965"},{"product_id":"general-finishes-outdoor-oil-quart","title":"General Finishes Outdoor Oil - Quart","description":"\u003cp\u003e\u003cspan\u003eGeneral Finishes Outdoor Oil is an exterior-rated penetrating oil that acts as a wood maintenance preservative. It contains UV stabilizers, mildew prohibitors, and twice the oil contained in competing brands. Use Outdoor Oil for all exterior outdoor wood projects, particularly wood furniture. It can be used by itself, over any stain, and on pressure-treated wood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Outdoor Oil may not adhere to extremely oily exotic woods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Clear - Dries with an amber tone.\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Alkyd\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1 - 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 24+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 36+ hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 60-90 sq. ft.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePreparation\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood decks, siding, fences, and furniture\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSand no finer that 120-grit sandpaper when necessary. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood furniture, décor, and mailboxes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSand with 120-grit sandpaper followed by 150-grit. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGeneral Finishes Outdoor Oil can be used over any existing exterior finish.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBegin by power washing and let dry overnight. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove noticeable residue with 120-grit sandpaper.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet dry completely before applying Outdoor Oil.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eDirections\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eWood must be clean \u0026amp; dry before use. Outdoor Oil is a maintenance product that penetrates into the wood but does not form a film. Reapply when wear becomes evident.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWork in a well-ventilated area. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStir thoroughly. Do NOT thin.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply 1-2 coats.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal coat of Outdoor Oil with a cloth, natural bristle brush, staining pad, paint pad or roller with smooth even strokes. Allow it to penetrate for 1-2 minutes, then wipe off excess with clean cloth. It is important to remove extra oil; any oil buildup that dries on the surface may cause drying problems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eSpray application:\u003c\/strong\u003e Strain with medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our general guide for spray tip sizes. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved). Visit this FAQ for more information on spraying techniques. \u003c\/span\u003eSpray on a wet coat and let the oil penetrate for 1-2 minutes. Be sure to wipe off the excess oil with a clean cloth.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry 24-36 hours between coats in ideal conditions, 70°F\/20°C; 50-70% humidity. If in doubt, wait longer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncrease dry time if:\u003c\/span\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eUse an inexpensive herbicide sprayer.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApplying over an existing sealed finish\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThick coats are applied\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3+ coats are applied\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHumidity is over 80%\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/S8Cm34o-F4Q\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":35353081993,"sku":"QTOC","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Outdoor-Oil.jpg?v=1628613734"},{"product_id":"jen-poly-foam-brushes","title":"Jen Poly Foam Brushes","description":"\u003cp\u003ePoly-Brush by Jen is ideal for the application of enamel, latex, oil paints, stain and varnish.\u003c\/p\u003e\n\u003cp\u003eThe Poly-Brush® by Jen smooths out the paint and covers correctly with fewer strokes, eliminating brush marks or loose bristles so that even the inexperienced users can achieve reliable, professional results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually.\u003c\/strong\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"1\"","offer_id":38436701385,"sku":"JPFB1","price":0.52,"currency_code":"USD","in_stock":true},{"title":"2\"","offer_id":21863788544118,"sku":"JPFB2","price":0.7,"currency_code":"USD","in_stock":true},{"title":"3\"","offer_id":21863788511350,"sku":"JPFB3","price":0.93,"currency_code":"USD","in_stock":true},{"title":"4\"","offer_id":21863788478582,"sku":"JPFB4","price":1.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/allbrushes.jpg?v=1682010767"},{"product_id":"general-finishes-extender-pint","title":"General Finishes Extender - Pint","description":"\u003cp\u003eExtender is a wetting additive used to improve flow and leveling. It increases the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-4oz\" target=\"_blank\" title=\"General Finishes Extender - 4oz. product page\" rel=\"noopener noreferrer\"\u003e4 oz. bottles\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Performance\/Additive\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Add up to 15% to water based products.\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eGeneral Finishes Extender is a water-based wetting additive that can be used to extend the drying time of all General Finishes water based topcoats, stains, primers, glazes and paints. Do not use with oil-based products.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10-15% by volume if allowed by local regulations to lengthen the drying time of GF water-based products. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly to incorporate GF Extender into coating.\u003c\/li\u003e\n\u003cli\u003eTest product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll mixes of General Finishes water-based products containing up to 15% General Finishes Extender or General Finishes Accelerator can be stored.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":29407977439350,"sku":"EXPT","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Extender.jpg?v=1628542837"},{"product_id":"general-finishes-stir-sticks","title":"General Finishes Stir Sticks","description":"General Finishes Ergonomic Stir Stick for stirring water-base and oil-base finishes.","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":19195134345334,"sku":"STIX","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/stirsticks.jpg?v=1708535675"},{"product_id":"general-finishes-arm-r-seal-topcoats-quart","title":"General Finishes Arm-R-Seal Topcoats - Quart","description":"\u003cp\u003eArm-R-Seal is a durable, oil-based topcoat made with high-quality urethane resins for exceptional durability. This easy-to-apply finish will bring out the natural beauty in hardwoods such as Walnut and Mahogany and will amber over time.\u003c\/p\u003e\n\u003cp\u003eRecommended for interior raw wood surfaces such as cabinets, trim, doors, and furniture. Also suitable for floors.\u003c\/p\u003e\n\u003cp\u003eArm-R-Seal is available in Satin, Semi-Gloss, and Gloss. Also available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-arm-r-seal-topcoat-pint\" title=\"General Finishes Arm-R-Seal Topcoat - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.0mm-1.2mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 12+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 12-24+ hrs. raw wood, 72+ hrs. existing finish until non-tacky. (Add more time with subsequent coats.)\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100-125 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Highest\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eSand up to 150-grit sandpaper.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry 1-2 hours.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eWork in a well-ventilated area.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not apply over light or white finishes as this is an oil-based finish, which is amber in color upon application and will deepen over time. Use over raw wood or dark paints.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStir the wood finish thoroughly and often throughout use to reincorporate solids that have settled to the bottom of the can. Alternately, stir well and immediately decant what you'll be using. Arm-R-Seal is a thin urethane topcoat; the flatting agents used to create flatter sheens quickly settle to the bottom of the can and need to be redistributed often.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTest for adhesion when applying over a sealed surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eArm-R-Seal rarely needs thinning due to its low viscosity. If desired, thin with up to 10% mineral spirits unless restricted by local or state regulations.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply 3 coats. No more than 3 coats is recommended. Additional coats will not improve durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e\u003cspan\u003e Apply a liberal amount of product using a cotton cloth, foam brush or staining pad with smooth, even strokes \u0026amp; light lap lines. The larger the surface the large the applicator needed. Wipe off the excess evenly with the grain \u0026amp; with light pressure using a cloth or high-quality absorbent paper towel. Avoid heavy pressure \u0026amp; back-brushing. It is more important to avoid over brushing when using Satin Arm-R-Seal, because of the increased flatting agents needed to create a SATIN sheen. Semi-gloss and Gloss sheens are easier to apply because there are little to no flatting agents.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e\u003cspan\u003e Arm-R-Seal can be sprayed successfully, but we prefer hand-application methods because it is easy to spray too much in one area. Spray thin coats and immediately wipe or brush out runs if they occur. Spray wet films at 3-5-mil thickness. HVLP: 1.0mm-1.2mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 10% to conceal lines. Wear a full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection and work in a well-ventilated space. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish sand between coats with a 320 grit or finer sanding sponge or '0000' steel wool to improve smoothness and adhesion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0Fb4U9toUrA\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Satin","offer_id":21926280626294,"sku":"ASQT","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":21926280888438,"sku":"SGQT","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":21926280757366,"sku":"AGQT","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Arm-R-Seal-Satin-Quart.jpg?v=1628530020"},{"product_id":"general-finishes-seal-a-cell-quart","title":"General Finishes Seal-a-Cell - Quart","description":"\u003cp\u003eOil-based Seal-A-Cell is a unique combination of oils and waxes that penetrates deep into wood, highlighting its natural beauty with a \"close to the wood\" finish. Seal-A-Cell ambers over time while providing water- and chemical-resistance. \u003c\/p\u003e\n\u003cp\u003eSeal-A-Cell is designed to be used as a basecoat for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-arm-r-seal\" title=\"General Finishes Arm-R-Seal Top Coat product page\" target=\"_blank\"\u003eGF Arm-R-Seal\u003c\/a\u003e but can be used as a stand-alone finish. It can also be used as a wood conditioner to control the penetration of stains or intermix with GF oil-based stains to dilute or create custom colors.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-seal-a-cell-pint\" title=\"General Finishes Seal-a-Cell - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct colors:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil, Urethane \u0026amp; Wax Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1-2 coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 12+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 24+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100-125 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eSand open grain wood with 120 grit sandpaper, followed by 150 grit, then 180 grit. Sand closed grain wood with 150 grit sandpaper followed by 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before use.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion\u003c\/li\u003e\n\u003cli\u003eApply a liberal amount of product using a natural bristle brush, foam brush, pad applicator, staining pad or cotton cloth. Wipe along the wood grain using smooth, even strokes. Avoid heavy pressure and back brushing.\u003c\/li\u003e\n\u003cli\u003eWipe off excess evenly with the grain and with light pressure using a cloth or absorbent paper towel.\u003c\/li\u003e\n\u003cli\u003eApply first coat of topcoat before sanding.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nTCx5ibRtfY\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":21926313721974,"sku":"SSQT","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/sealacell-quart.jpg?v=1672432499"},{"product_id":"general-finishes-butcher-block-oil-pint","title":"General Finishes Butcher Block Oil - Pint","description":"\u003cp\u003eButcher Block Oil is a natural protectant for all wood surfaces that come in contact with food. Use this oil-based finish on wood cutting boards, utensils, bowls, and butcher blocks.\u003c\/p\u003e\n\u003cp\u003eThe mineral oils used in General Finishes Butcher Block Oil meet all the requirements for use on wooden products that come in contact with food.\u003c\/p\u003e\n\u003cp\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-butcher-block-oil-gallon\" target=\"_blank\" title=\"General Finishes Butcher Block Oil - Gallon product page\" rel=\"noopener noreferrer\"\u003egallon\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Mineral Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Mineral Oil\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 5 minutes\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eNew, untreated butcher blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrep sand with 120-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal product absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExisting surfaces previously treated with Butcher Block Oil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove food residue using a pastry scraper or spatula to gently scrape areas where you find dried-on food or residue. Avoid gouging the wood by keeping the blade at an angle that just skims the surface.\u003c\/li\u003e\n\u003cli\u003eScrub using a scrub brush, Scotch Brite Pad, or sponge and scrub the butcher block with hot water and mild dish soap.\u003c\/li\u003e\n\u003cli\u003eRinse with hot water: Run a clean dishcloth through hot water and rinse several times.\u003c\/li\u003e\n\u003cli\u003eDry thoroughly with a clean dish towel or paper towel.\u003c\/li\u003e\n\u003cli\u003eLet the surface dry overnight before applying another coat of Butcher Block Oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eApply 2 coats of Butcher Block oil with a soft cloth.\u003c\/li\u003e\n\u003cli\u003eLet the first coat soak in for half an hour and then wipe off the excess.\u003c\/li\u003e\n\u003cli\u003eApply the second coat. Let it absorb into the raw wood for 5+ minutes, then wipe the surface completely dry with a clean cloth.\u003c\/li\u003e\n\u003cli\u003eButcher Block Oil is a maintenance product. Regular applications are recommended to keep the surface stain-repellant and looking its best.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a0BNJ6ZeKyc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":22669598883958,"sku":"PTBB","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Butcher-Block-Oil.jpg?v=1628530675"},{"product_id":"general-finishes-satin-wax-natural","title":"General Finishes Satin Finishing Wax - 8 oz.","description":"\u003cp\u003e\u003cspan\u003eSatin Finishing Wax is a special blend of waxes designed to give finished woods a rich luster. It can be used as a polish for rubbing out new finishes or as a scratch-remover for worn surfaces. It works well over both oil- and water-based finishes, including Danish Oil. We recommend a wet-sanding process followed by buffing to a soft silky sheen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Accent Wax\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/iQZE8ng3PZw\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDirections\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eLight Polishing:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eShake container well.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWipe on a thin, even coat with a clean cloth.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet sit 10 minutes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePolish with a soft cloth, wiping away the excess in the direction of the wood grain.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eBuffing A Topcoat To A High Gloss:\u003c\/strong\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eShake container well.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWipe on a thin, even coat with a clean cloth.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet sit 1-2 minutes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuff off excess with a buffing or sanding pad (see below) in the direction of the wood grain. The higher\/finer grit you use, the easier it will be to achieve a high-gloss finish.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eFixing A Scratch:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eShake container well.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not sand \"dry-on-dry\" to remove scratch marks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdd Satin Wax as a lubricant on the pad AND on the surface of your project, then spread smooth with a rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet sit 10 minutes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePolish with a soft cloth, wiping away the excess in the direction of the wood grain.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":22669610811510,"sku":"SN8","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/satinwax.jpg?v=1672435677"},{"product_id":"general-finishes-orange-oil","title":"General Finishes Orange Oil Furniture Cleaner \u0026 Polish - 16 oz.","description":"\u003cp\u003eOrange Oil is General Finishes' most popular and natural furniture care product. It can be used on any cured finish and does a superb job of removing everyday dirt and dust. Orange Oil is all-natural, non-combustible with a fresh orange scent. Designed for use on interior wood finishes.\u003c\/p\u003e\n\u003cp\u003eOrange oil is great for routine furniture maintenance, antique restoration and as a lubricant when buffing topcoat.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior (use over cured topcoat)\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Polish\/Cleaner\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe on with clean rag (use over cured topcoat only)\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e No dry time required between coats.\u003c\/p\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eApplication for Cleaning\u003cb\u003e: \u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply with a clean, soft cloth. \u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain. \u003c\/li\u003e\n\u003cli\u003eRepeat as needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePolishing\/Buffing:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eShake container well.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWipe on a thin, even coat with a clean cloth.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet sit 1-2 minutes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuff off the excess with a buffing or sanding pad in the direction of the wood grain. The higher\/finer grit you use, the easier it will be to achieve a high-gloss finish.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/SKqSNOS0CZs?si=c6sZx69tQImbbwll\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":29481532719222,"sku":"PTOO","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Orange-Oil.jpg?v=1611771400"},{"product_id":"general-finishes-conversion-varnishes","title":"General Finishes Enduro Conversion Varnishes - Gallon (with NCO Catalyst)","description":"\u003cp\u003eWater-based Conversion Varnish is a clear drying, two-component, post-catalyzed urethane topcoat for professional use when ultimate durability is needed. Use this wood finish for high-use projects that receive more use, such as bars, commercial tabletops, bathroom vanities, around dishwashers, kitchen cabinets or high-moisture areas. Suitable for interior and exterior projects, CV is the most durable water‐based topcoat in GF’s product line and significantly outperforms solvent‐based CV’s.\u003c\/p\u003e\n\u003cp\u003eRequires thoroughly mixing 10 parts CV to 1 part NCO Catalyst by volume using a power mixer. Once combined, strain through a fine mesh strainer and let sit for 15 minutes before use. Pot life is about 6 hours once combined. Mixture will solidify after 6 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended uses:\u003c\/strong\u003e Interior or exterior cabinets, trim, doors, furniture, table tops, and bar tops. Use over raw wood, stain, and non-white painted surfaces.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 72 hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 7 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 350-450\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Highest\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can using a power drill and mixer (recommended) or by hand with a paint stick.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish.\u003c\/li\u003e\n\u003cli\u003eThin as desired, with distilled water (before or after mixing with NCO catalyst); start with 5%,adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% by volume of General Finishes Extender if allowed by local regulations. GF Extender can be used to improve flow and leveling, and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the product non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eSlowly add up to 10% NCO Catalyst by volume (3.2 oz. per quart; 12.8 oz. per gallon) to Conversion Varnish while stirring thoroughly. Allow 2-3 minutes when mixing with a power drill, or 5 minutes when mixing by hand with a paint stick. Use gloves and protective eyewear when mixing. Mix only what you are going to use and clean the spray gun immediately after use. The finish can only be mixed once, and the leftover product will solidify after 6-8 hours. DO NOT store in a closed container to avoid pressure build-up.\u003c\/li\u003e\n\u003cli\u003eLet Conversion Varnish sit for 15 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Spray tip recommendations. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. NOTE: Conversion Varnish is used with NCO catalyst. When using a spray-gun, wear self-contained breathing apparatus. In the event of insufficient ventilation: Wear self-contained breathing apparatus. When respirators are required, select NIOSH\/MSHA approved equipment and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Enduro professional products are engineered to be spray-only but can be successfully applied by hand to cabinet face frames or edges with a pad applicator or small, cabinet-specific roller such as Whizz Velour brand. Larger areas may not level with a hand application.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired when applying clears over raw wood, use \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" title=\"General Finishes Enduro Sanding Sealer product page\" target=\"_blank\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of Enduro Conversion Varnish.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":40375694819527,"sku":"CVF","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":39512727683271,"sku":"CVS","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":39512727716039,"sku":"CVSG","price":195.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":40375694786759,"sku":"CVG","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/EnduroCVFlat-1gal.jpg?v=1727725747"},{"product_id":"general-finishes-stain-blocker-quart","title":"General Finishes Enduro Water-Based Stain Blocker - Quart","description":"\u003cp\u003eGeneral Finishes' Stain Blocker has been reformulated for the Enduro Product Line. It is a revolutionary water-based stain-blocking primer that now provides improved sand-ability and advanced performance for interior AND exterior projects. It can protect pigmented finishes from stains, dyes, and wood tannin bleed-through.\u003c\/p\u003e\n\u003cp\u003eThis primer has a sophisticated resin system and an atypical formulation. Use on pieces where you are concerned about bleed-through. For DIY customers or professionals painting a surface any shade of white or light gray, look no further than Enduro Stain Blocker.\u003c\/p\u003e\n\u003cp\u003eBrush or spray over an existing finish, raw wood, or MDF as a base coat for light-colored General Finishes \u003ca title=\"General Finishes Milk Paint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-milk-paint\" target=\"_blank\"\u003eMilk Paint\u003c\/a\u003e and Pigmented Polys. \u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-stain-blocker-gallon\" title=\"General Finishes Stain Blocker - Gallon product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003egallons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not thin Stain Blocker with anything but distilled water. Do not add more than 5% distilled water. Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Stain Blocking Primer\u003cbr\u003e\u003cstrong\u003eTintable: \u003c\/strong\u003eNo\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.8-2 mm\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 125-150 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit\u003c\/li\u003e\n\u003cli\u003eRemove dust with a water-dampened rag or oil-free tack cloth.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion over existing finishes and test entire finishing process. Not all bleed-through can be prevented with primer.\u003c\/li\u003e\n\u003cli\u003eDo not mix or tint with paint, stain, or topcoat as contamination from other finishes will cause product failure.\u003c\/li\u003e\n\u003cli\u003eThin with caution up to 5% with water only. Over-thinning will reduce the stain blocking properties.\u003c\/li\u003e\n\u003cli\u003eRinse applicators \u0026amp; spray guns with water immediately after use.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8mm-2.0mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our spray tip size recommendations here. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter (NIOSH\/MSHA approved) respiratory \u0026amp; eye protection and work in a ventilated space. Visit this FAQ for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Stain Blocker can be applied successfully to cabinet face frames, edges or drawers with a brush, pad applicator or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 grit sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eCooler Temperatures\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/JGerHN_DwdU\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":40514864677063,"sku":"QSB","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Endurostainblocker-quart.jpg?v=1727876020"},{"product_id":"general-finishes-oil-based-gel-topcoat","title":"General Finishes Oil Based Gel Topcoat - Quart","description":"\u003cp\u003eGel Satin Topcoat has been a long-time favorite finish of woodworkers, with a heavy-duty oil-and-urethane base that produces a beautiful, hand-rubbed look. Gel Satin Topcoat has a thick consistency, so there are no drips or runs.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-oil-based-gel-topcoat-pint\" title=\"General Finishes Oil Based Gel Topcoat - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin (25-35)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil \u0026amp; Urethane\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 8+ hr\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 12-24+ hr raw wood, 72+ hr existing finish until non-tacky. (Add more time with subsequent coats.)\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100-150 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Highest\u003c\/p\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eWork in a well-ventilated area. Open windows and doors, or use other means, to maintain fresh air flow during application and drying.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStir thoroughly. Even though General Finishes Gel Topcoat is thick, be sure to stir it well to reincorporate solids that have settled to the bottom of the can.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 coats of topcoat are recommended. Apply thin coats with a cotton cloth, natural bristle or foam brush, staining pad or pad applicator with smooth, even strokes. Avoid heavy pressure \u0026amp; back-brushing. The larger the surface the larger the applicator needed. Additional coats will not improve durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWipe off the excess evenly with the grain \u0026amp; with light pressure using a clean cloth or high-quality absorbent paper towel.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish sand between coats with a 220-320-grit foam sanding sponge or '0000' steel wool. Do not sand final coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, tack cloth or clean water dampened rag before re-coating.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":40656947904711,"sku":"SQ","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Gel-Topcoat.jpg?v=1672432182"},{"product_id":"general-finishes-wood-bowl-finish-quart","title":"General Finishes Wood Bowl Finish - Quart","description":"\u003cp\u003eWood Bowl Finish is a durable oil-and-urethane oil-based finish designed for use on decorative wooden bowls and turnings. Its high-quality resins form a durable film with an amber tone that brings out the natural beauty in wood such as maple, walnut, and cherry.\u003c\/p\u003e\n\u003cp\u003eFor countertops actively used for chopping and cutting, we recommend \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-butcher-block-oil\" title=\"General Finishes Butcher Block Oil product page\" target=\"_blank\"\u003eButcher Block Oil\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProduct colors: \u003c\/strong\u003eDries Amber\u003cstrong\u003e\u003cbr\u003eBase type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil \u0026amp; Urethane\u003cbr\u003e\u003cstrong\u003eSheen: \u003c\/strong\u003eGloss (80+)\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.0mm-1.2mm\u003cbr\u003e\u003cstrong\u003eDry time - touch:\u003c\/strong\u003e 12+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - recoat:\u003c\/strong\u003e 24+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - light use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry time - cure: \u003c\/strong\u003e30 days\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e100-150 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003ePreparation\u003c\/span\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eSand open grain wood with 120 grit sandpaper, followed by 150 grit, then 180 grit. Sand closed grain wood with 150 grit sandpaper followed by 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir topcoat thoroughly to reincorporate solids that have settled to the bottom of the can before use. Urethane topcoats are thin and the flatting agents used to create flatter sheens settle quickly to the bottom. Either stir and decant what you need to use immediately or stir frequently throughout the application process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a cotton cloth, natural bristle or foam brush, staining pad with smooth, even strokes \u0026amp; light lap lines. The larger the surface the larger the applicator needed. Wipe off the excess evenly with the grain \u0026amp; with light pressure using a cloth or absorbent paper towel.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 grit foam sanding pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kf01ukoEBoE\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":40893592862919,"sku":"SBQT","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/woodbowlfinish-quart.jpg?v=1672433133"},{"product_id":"general-finishes-arm-r-seal-topcoat-pint","title":"General Finishes Arm-R-Seal Topcoats - Pint","description":"\u003cp\u003eArm-R-Seal is a durable, oil-based topcoat made with high-quality urethane resins for exceptional durability. This easy-to-apply finish will bring out the natural beauty in hardwoods such as Walnut and Mahogany and will amber over time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRecommended for interior raw wood surfaces such as cabinets, trim, doors, and furniture. Also suitable for floors.\u003c\/p\u003e\n\u003cp\u003eArm-R-Seal is available in Satin, Semi-Gloss, and Gloss. Also available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-arm-r-seal-topcoats-quart\" title=\"General Finishes Arm-R-Seal Topcoats - Quart product page\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.0mm-1.2mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 12+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 12-24+ hrs. raw wood, 72+ hrs. existing finish until non-tacky. (Add more time with subsequent coats.)\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50-60 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Highest\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eSand up to 150-grit sandpaper.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry 1-2 hours.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eWork in a well-ventilated area.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not apply over light or white finishes as this is an oil-based finish, which is amber in color upon application and will deepen over time. Use over raw wood or dark paints.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStir the wood finish thoroughly and often throughout use to reincorporate solids that have settled to the bottom of the can. Alternately, stir well and immediately decant what you'll be using. Arm-R-Seal is a thin urethane topcoat; the flatting agents used to create flatter sheens quickly settle to the bottom of the can and need to be redistributed often.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTest for adhesion when applying over a sealed surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eArm-R-Seal rarely needs thinning due to its low viscosity. If desired, thin with up to 10% mineral spirits unless restricted by local or state regulations.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply 3 coats. No more than 3 coats is recommended. Additional coats will not improve durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e\u003cspan\u003e Apply a liberal amount of product using a cotton cloth, foam brush or staining pad with smooth, even strokes \u0026amp; light lap lines. The larger the surface the large the applicator needed. Wipe off the excess evenly with the grain \u0026amp; with light pressure using a cloth or high-quality absorbent paper towel. Avoid heavy pressure \u0026amp; back-brushing. It is more important to avoid over brushing when using Satin Arm-R-Seal, because of the increased flatting agents needed to create a SATIN sheen. Semi-gloss and Gloss sheens are easier to apply because there are little to no flatting agents.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e\u003cspan\u003e Arm-R-Seal can be sprayed successfully, but we prefer hand-application methods because it is easy to spray too much in one area. Spray thin coats and immediately wipe or brush out runs if they occur. Spray wet films at 3-5-mil thickness. HVLP: 1.0mm-1.2mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 10% to conceal lines. Wear a full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection and work in a well-ventilated space. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish sand between coats with a 320 grit or finer sanding sponge or '0000' steel wool to improve smoothness and adhesion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0Fb4U9toUrA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Satin","offer_id":43843501457625,"sku":"ASPT","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":43843501490393,"sku":"SGPT","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":43843501523161,"sku":"AGPT","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Arm-R-Seal-SemiGloss-Pint_a0087854-fc3b-470a-b42e-f09ba7b8bf5d.jpg?v=1679754135"},{"product_id":"general-finishes-butcher-block-oil-gallon","title":"General Finishes Butcher Block Oil - Gallon","description":"\u003cp\u003eButcher Block Oil is a natural protectant for all wood surfaces that come in contact with food. Use this oil-based finish on wood cutting boards, utensils, bowls, and butcher blocks.\u003c\/p\u003e\n\u003cp\u003eThe mineral oils used in General Finishes Butcher Block Oil meet all the requirements for use on wooden products that come in contact with food.\u003c\/p\u003e\n\u003cp\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-butcher-block-oil-pint\" target=\"_blank\" title=\"General Finishes Butcher Block Oil - Pint product page\" rel=\"noopener noreferrer\"\u003epint\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Mineral Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Mineral Oil\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 5 minutes\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eNew, untreated butcher blocks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrep sand with 120-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eDo not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal product absorption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExisting surfaces previously treated with Butcher Block Oil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove food residue using a pastry scraper or spatula to gently scrape areas where you find dried-on food or residue. Avoid gouging the wood by keeping the blade at an angle that just skims the surface.\u003c\/li\u003e\n\u003cli\u003eScrub using a scrub brush, Scotch Brite Pad, or sponge and scrub the butcher block with hot water and mild dish soap.\u003c\/li\u003e\n\u003cli\u003eRinse with hot water: Run a clean dishcloth through hot water and rinse several times.\u003c\/li\u003e\n\u003cli\u003eDry thoroughly with a clean dish towel or paper towel.\u003c\/li\u003e\n\u003cli\u003eLet the surface dry overnight before applying another coat of Butcher Block Oil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eApply 2 coats of Butcher Block oil with a soft cloth.\u003c\/li\u003e\n\u003cli\u003eLet the first coat soak in for half an hour and then wipe off the excess.\u003c\/li\u003e\n\u003cli\u003eApply the second coat. Let it absorb into the raw wood for 5+ minutes, then wipe the surface completely dry with a clean cloth.\u003c\/li\u003e\n\u003cli\u003eButcher Block Oil is a maintenance product. Regular applications are recommended to keep the surface stain-repellant and looking its best.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/a0BNJ6ZeKyc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43843539009753,"sku":"PTBG","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/BBoil-gallon_d28eb88d-cda2-4756-9b47-455c1c9a7073.jpg?v=1679755143"},{"product_id":"general-finishes-extender-4oz","title":"General Finishes Extender - 4 oz.","description":"\u003cp\u003eExtender is a wetting additive used to improve flow and leveling. It increases the drying time of any water-based stain, topcoat, or glaze, which is helpful in hot, dry conditions.\u003c\/p\u003e\n\u003cp\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-pint\" title=\"General Finishes Extender - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epint\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Clear\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Performance\/Additive\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Add up to 15% to water based products.\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003eGeneral Finishes Extender is a water-based wetting additive that can be used to extend the drying time of all General Finishes water based topcoats, stains, primers, glazes and paints. Do not use with oil-based products.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10-15% by volume if allowed by local regulations to lengthen the drying time of GF water-based products. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly to incorporate GF Extender into coating.\u003c\/li\u003e\n\u003cli\u003eTest product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll mixes of General Finishes water-based products containing up to 15% General Finishes Extender or General Finishes Accelerator can be stored.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43843557392601,"sku":"EX4","price":7.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Extender-4oz_7b611143-3f7b-4ca5-99e2-158b958bce1d.jpg?v=1679756108"},{"product_id":"general-finishes-gel-stains-pint","title":"General Finishes Gel Stains - Pint","description":"\u003cp\u003eGeneral Finishes Gel Stain is a great way to upcycle furniture and cabinets. The Gel Stain is very thick and resists runs and drips so you can easily stain existing cabinetry.  Gel stain can go on top of existing top coats so there is no need to completely strip old finishes. \u003c\/p\u003e\n\u003cp\u003eGel wood stains are heavy-bodied and do not penetrate as deeply into the wood as liquid oil-based wipe-on stains do, providing the deepest, richest colors of any oil-based stain available. Color swatches shown on Maple.\u003c\/p\u003e\n\u003cp\u003eThe following materials will be needed to prep and refinish cabinetry with Gel Stain:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA cleaning product, such as dish soap\u003c\/li\u003e\n\u003cli\u003e50:50 mix of water and denatured alcohol\u003c\/li\u003e\n\u003cli\u003eGreen \u003ca rel=\"noopener\" title=\"Diablo Stripping Pads (2 Pack) product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/final-stripping-pads-2-pack\" target=\"_blank\"\u003estripping pad\u003c\/a\u003e\u003ca rel=\"noopener\" title=\"Diablo Final Stripping Pads (2 Pack) product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/final-stripping-pads-2-pack\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e400 grit \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" rel=\"noopener\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e or 220 grit foam \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" rel=\"noopener\" target=\"_blank\"\u003esanding pad\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-sticky tac cloth to remove dust from sanding or water dampened rag\u003c\/li\u003e\n\u003cli\u003e(2) \u003ca href=\"https:\/\/www.oaktreesupplies.com\/products\/jen-poly-foam-brushes\" title=\"Jen Poly Foam Brushes\"\u003eFoam brushes\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlue Shop Towels\u003c\/li\u003e\n\u003cli\u003ePainters Tape\u003c\/li\u003e\n\u003cli\u003eA top coat (such as \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-pint\" target=\"_blank\" title=\"General Finishes High Performance Topcoat\" rel=\"noopener\"\u003eGeneral Finishes High Performance Water-Based Top Coat\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-gel-stains-quart\" title=\"General Finishes Gel Stains - Quart product page\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Wipe On with Clean Rag\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e Raw Wood (8+ hrs.), Existing Finish wipe-off (12-24+ hrs.)\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e Raw Wood (12-24 hrs.), Existing Finish wipe-off (72+ hrs.)\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat - Applied Over Water Based Product:\u003c\/strong\u003e 72 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 75-100 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Very Thick\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePrep sand with 120-grit sandpaper followed by 150-grit sandpaper. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet dry completely before applying General Finishes product. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eScuff clean with a green stripping pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry 1-2 hours.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSand lightly with a 220-320-grit foam sanding sponge.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLet dry completely before applying General Finishes product.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDry Brushing Over an Existing Finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTest your complete finishing process before starting. The stain color is affected by variances in wood and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eApply stain with a natural bristle brush or foam brush. Go in the direction of the grain.\u003c\/li\u003e\n\u003cli\u003eFeather out uneven areas and pull excess stain from corners using a bristle brush. Discharge accumulated stain from the brush onto a paper towel soaked with mineral spirits as you work.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 72+ hours in ideal conditions: 70°F\/20°C, 50% humidity. You can tell if an oil-based finish is dry if it is no longer tacky, and cool to the touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional:\u003c\/strong\u003e Apply a second coat to deepen the color. Apply no more than 2 coats.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/vGMJWz3mnEo\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"American Oak","offer_id":43843667853529,"sku":"OP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Antique Walnut","offer_id":43843667919065,"sku":"AP","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Ash Gray","offer_id":43843667984601,"sku":"APT","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43843668050137,"sku":"BLP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":43843668115673,"sku":"BP","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Candlelight","offer_id":43843668181209,"sku":"CP","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Grey","offer_id":43843668246745,"sku":"CPT","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Colonial Maple","offer_id":43843668312281,"sku":"CMP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Georgian Cherry","offer_id":43843668377817,"sku":"GCP","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":43843668443353,"sku":"GRP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Java","offer_id":43843668508889,"sku":"JP","price":34.0,"currency_code":"USD","in_stock":true},{"title":"New Pine","offer_id":43843668574425,"sku":"NPP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Nutmeg","offer_id":43843668639961,"sku":"NP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Prarie Wheat","offer_id":43843668705497,"sku":"PP","price":28.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":43843668771033,"sku":"WPT","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/gelstain-pint_ab9c34ca-2ad9-4333-b457-e6736c74ccf9.jpg?v=1679759806"},{"product_id":"general-finishes-milk-paints-pint","title":"General Finishes Milk Paints - Pint","description":"\u003cp\u003eGeneral Finishes Milk Paints are premium acrylic, water-based paints named for their low-luster sheen which mimics the look of old-world furniture paint. Not a true \"casein based milk paint\" but a modern version of old world paint with a strong mineral base. It is adaptable and UV resistant and may be applied by brushing or spraying and possesses excellent flow and leveling properties. Milk paints are formulated with zero-VOC colorants and pre-mixed for your convenience. They can be used on interior or exterior projects without a topcoat, including raw wood, pre-finished wood, and fiberglass.\u003c\/p\u003e\n\u003cp\u003eYou can mix it, lighten it, distress it, glaze it, layer different colors or antique it - perfect for upcycling or repurposing furniture.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-milk-paints-quart\" title=\"General Finishes Milk Paints - Quart product page\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/span\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat low luster (10-15)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic Paint\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.8mm-2.0mm\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Self-Sealing\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat\u003c\/strong\u003e: 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50-65 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 2,000-,3000\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSanding schedule: 120-grit sandpaper followed by 150-grit. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption. Do not use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a Scotch Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir paint to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume. Do not use flowing agents such as Floetrol. This paint already contains a flow agent and outside products may not be compatible.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. \u003c\/li\u003e\n\u003cli\u003eApply as many coats as needed for desired coverage. 2-3 coats are standard but additional coats may be required when using colors with less \"hide properties,\" such as bright reds, greens, yellows and whites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Using a synthetic bristle brush, foam brush, pad applicator, or microfiber roller such as Whizz or AllPro brand, apply using smooth, even strokes.\u003cbr\u003e\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8 mm-2 mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection.\u003cbr\u003e\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Milk Paint can be applied successfully to cabinet face frames, edges or drawer fronts with a brush, pad or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats and before General Finishes water-based topcoat in ideal conditions: 70°F\/20°C; 50-70% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing dry time can cause clouding\/blush in topcoat due to moisture trapped between coats.\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if humidity is over 80%, 3+ coats are applied, thick coats are applied, applying over an existing sealed finish, applying over products from other brands, or layering General Finishes water- and oil-based products.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0slo3c8TmD8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique White","offer_id":43843755016409,"sku":"PAW","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Basil","offer_id":43843755147481,"sku":"PBA","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Coastal Blue","offer_id":43843755278553,"sku":"PCB","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Dark Chocolate","offer_id":43843757015257,"sku":"PDC","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Lamp Black","offer_id":43843755966681,"sku":"PLB","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Linen","offer_id":43843756032217,"sku":"PLI","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Perfect Gray","offer_id":43843756228825,"sku":"PPGY","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Persian Blue","offer_id":43843756294361,"sku":"PPB","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Queenstown Gray","offer_id":43843756425433,"sku":"PQG","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Seagull Grey","offer_id":43843756556505,"sku":"PSGG","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Snow White","offer_id":43843756622041,"sku":"PSW","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Tuscan Red","offer_id":43843756753113,"sku":"PTR","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/milkpaint-pint_1f7f6fca-6a92-4ad9-b72e-1b50d038b3ee.jpg?v=1679761915"},{"product_id":"general-finishes-milk-paints-gallon","title":"General Finishes Milk Paints - Gallon","description":"\u003cp\u003e\u003cstrong\u003eMilk paint gallons are a special order item and cannot be returned. They will typically ship in 3-5 business days. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Milk Paints are premium acrylic, water-based paints named for their low-luster sheen which mimics the look of old-world furniture paint. Not a true \"casein based milk paint\" but a modern version of old world paint with a strong mineral base. It is adaptable and UV resistant and may be applied by brushing or spraying and possesses excellent flow and leveling properties. Milk paints are formulated with zero-VOC colorants and pre-mixed for your convenience. They can be used on interior or exterior projects without a topcoat, including raw wood, pre-finished wood, and fiberglass.\u003c\/p\u003e\n\u003cp\u003eYou can mix it, lighten it, distress it, glaze it, layer different colors or antique it - perfect for upcycling or repurposing furniture.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/span\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat low luster (10-15)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\/Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic Paint\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.8mm-2.0mm\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Self-Sealing\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat\u003c\/strong\u003e: 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 400-500 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 2,000-3,000\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSanding schedule: 120-grit sandpaper followed by 150-grit. Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption. Do not use steel wool with water-based finishes; the particles will get trapped in the finish and rust.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a Scotch Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir paint to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume. Do not use flowing agents such as Floetrol. This paint already contains a flow agent and outside products may not be compatible.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. \u003c\/li\u003e\n\u003cli\u003eApply as many coats as needed for desired coverage. 2-3 coats are standard but additional coats may be required when using colors with less \"hide properties,\" such as bright reds, greens, yellows and whites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Using a synthetic bristle brush, foam brush, pad applicator, or microfiber roller such as Whizz or AllPro brand, apply using smooth, even strokes.\u003cbr\u003e\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8 mm-2 mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear full filter NIOSH\/MSHA-approved respiratory \u0026amp; eye protection.\u003cbr\u003e\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Milk Paint can be applied successfully to cabinet face frames, edges or drawer fronts with a brush, pad or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003cli\u003eDry 2+ hours between coats and before General Finishes water-based topcoat in ideal conditions: 70°F\/20°C; 50-70% humidity. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a fine-grade (220-320) foam sanding pad. If in doubt, wait longer. Rushing dry time can cause clouding\/blush in topcoat due to moisture trapped between coats.\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if humidity is over 80%, 3+ coats are applied, thick coats are applied, applying over an existing sealed finish, applying over products from other brands, or layering General Finishes water- and oil-based products.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eTo accelerate dry time in humid conditions, add General Finishes Accelerator and work in a space with good ventilation and air movement. If you decide to re-coat before the recommended time, test dryness.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding sponge or 400-grit sandpaper to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0slo3c8TmD8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique White","offer_id":43992631279833,"sku":"B158-L Gallon","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Basil","offer_id":43993234440409,"sku":"GBA","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Coastal Blue","offer_id":43993234473177,"sku":"GCB","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Dark Chocolate","offer_id":43993240600793,"sku":"GDC","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Lamp Black","offer_id":43843766091993,"sku":"GLB","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Linen","offer_id":43993255411929,"sku":"GLI","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Perfect Gray","offer_id":43993281691865,"sku":"GPGY","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Queenstown Gray","offer_id":43993314492633,"sku":"GQG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Seagull Gray","offer_id":43992637800665,"sku":"GSGG","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Snow White","offer_id":43993414140121,"sku":"B183-L Gallon","price":109.0,"currency_code":"USD","in_stock":true},{"title":"Tuscan Red","offer_id":43843766059225,"sku":"GTR","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/milkpaint-gallon_90b90a1b-092d-4bc4-adb4-2e54a6d3fbf0.jpg?v=1679762115"},{"product_id":"general-finishes-oil-based-gel-topcoat-pint","title":"General Finishes Oil Based Gel Topcoat - Pint","description":"\u003cp\u003eGel Satin Topcoat has been a long-time favorite finish of woodworkers, with a heavy-duty oil-and-urethane base that produces a beautiful, hand-rubbed look. Gel Satin Topcoat has a thick consistency, so there are no drips or runs.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-oil-based-gel-topcoat\" title=\"General Finishes Oil Based Gel Topcoat - Quart product page\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin (25-35)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil \u0026amp; Urethane\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 8+ hr\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 12-24+ hr raw wood, 72+ hr existing finish until non-tacky. (Add more time with subsequent coats.)\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50-75 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Highest\u003c\/p\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eWork in a well-ventilated area. Open windows and doors, or use other means, to maintain fresh air flow during application and drying.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStir thoroughly. Even though General Finishes Gel Topcoat is thick, be sure to stir it well to reincorporate solids that have settled to the bottom of the can.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 coats of topcoat are recommended. Apply thin coats with a cotton cloth, natural bristle or foam brush, staining pad or pad applicator with smooth, even strokes. Avoid heavy pressure \u0026amp; back-brushing. The larger the surface the larger the applicator needed. Additional coats will not improve durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWipe off the excess evenly with the grain \u0026amp; with light pressure using a clean cloth or high-quality absorbent paper towel.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish sand between coats with a 220-320-grit foam sanding sponge or '0000' steel wool. Do not sand final coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, tack cloth or clean water dampened rag before re-coating.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43843890577625,"sku":"SP","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/gettopcoat-pint_ed87aa17-99bf-4036-a853-3f22aefea611.jpg?v=1679765203"},{"product_id":"general-finishes-seal-a-cell-pint","title":"General Finishes Seal-a-Cell - Pint","description":"\u003cp\u003eOil-based Seal-A-Cell is a unique combination of oils and waxes that penetrates deep into wood, highlighting its natural beauty with a \"close to the wood\" finish. Seal-A-Cell ambers over time while providing water- and chemical-resistance.\u003c\/p\u003e\n\u003cp\u003eSeal-A-Cell is designed to be used as a basecoat for \u003ca title=\"General Finishes Arm-R-Seal Top Coat product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-arm-r-seal-topcoat-pint\" target=\"_blank\"\u003eGF Arm-R-Seal\u003c\/a\u003e but can be used as a stand-alone finish. It can also be used as a wood conditioner to control the penetration of stains or intermix with GF oil-based stains to dilute or create custom colors.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Seal-a-Cell - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-seal-a-cell-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct colors:\u003c\/strong\u003e Dries Amber\u003cbr\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Oil\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Oil, Urethane \u0026amp; Wax Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1-2 coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 12+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 24+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 30 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 50-60 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thin\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eSand open grain wood with 120 grit sandpaper, followed by 150 grit, then 180 grit. Sand closed grain wood with 150 grit sandpaper followed by 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before use.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion\u003c\/li\u003e\n\u003cli\u003eApply a liberal amount of product using a natural bristle brush, foam brush, pad applicator, staining pad or cotton cloth. Wipe along the wood grain using smooth, even strokes. Avoid heavy pressure and back brushing.\u003c\/li\u003e\n\u003cli\u003eWipe off excess evenly with the grain and with light pressure using a cloth or absorbent paper towel.\u003c\/li\u003e\n\u003cli\u003eApply first coat of topcoat before sanding.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/nTCx5ibRtfY\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43843919446233,"sku":"SSPT","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/sealacell-pint_c5605a3f-7d8f-4e66-9009-8de2580979a7.jpg?v=1679765819"},{"product_id":"general-finishes-stain-blocker-gallon","title":"General Finishes Enduro Stain Blocker - Gallon","description":"\u003cp\u003e Enduro Stain Blocker is General Finishes' revolutionary water-based stain-blocking primer that now provides improved sandability and advanced performance for interior AND exterior projects. Stain Blocker can be used to protect pigmented finishes from stain, dye, and wood tannin bleed-through. Brush or spray over an existing finish, raw wood, or MDF as a base coat for light-colored General Finishes \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-milk-paint\" title=\"General Finishes Milk Paint product page\" target=\"_blank\"\u003eMilk Paint\u003c\/a\u003e and Pigmented Polys. \u003c\/p\u003e\n\u003cp\u003eThis primer has a sophisticated resin system and an atypical formulation. Use on pieces where you are concerned about bleed-through. For DIY customers or professionals painting a surface any shade of white or light gray, look no further than General Finishes Stain Blocker.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Stain Blocker - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-stain-blocker-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not thin Stain Blocker with anything but distilled water. Do not add more than 5% distilled water. Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior \u0026amp; Exterior\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Stain Blocking Primer\u003cbr\u003e\u003cstrong\u003eTint-able: \u003c\/strong\u003eNo\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.8-2 mm\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500-600 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Thick\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSanding Schedule: 120-grit followed by 150- or 220-grit\u003c\/li\u003e\n\u003cli\u003eRemove dust with a water-dampened rag or oil-free tack cloth.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying GF product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad and a 50:50 mix of denatured alcohol and water. Dry 1-2 hours. Avoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320) sanding pad.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion over existing finishes and test entire finishing process. Not all bleed-through can be prevented with primer.\u003c\/li\u003e\n\u003cli\u003eDo not mix or tint with paint, stain, or topcoat as contamination from other finishes will cause product failure.\u003c\/li\u003e\n\u003cli\u003eThin with caution up to 5% with water only. Over-thinning will reduce the stain blocking properties.\u003c\/li\u003e\n\u003cli\u003eRinse applicators \u0026amp; spray guns with water immediately after use.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain paint through a medium-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.8mm-2.0mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our spray tip size recommendations here. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter (NIOSH\/MSHA approved) respiratory \u0026amp; eye protection and work in a ventilated space. Visit this FAQ for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames on cabinets:\u003c\/strong\u003e Stain Blocker can be applied successfully to cabinet face frames, edges or drawers with a brush, pad applicator or small cabinet-specific roller such as Whizz or AllPro brand.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 grit sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eIncrease dry time if:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eHumidity is over 80%\u003c\/li\u003e\n\u003cli\u003eCooler Temperatures\u003c\/li\u003e\n\u003cli\u003eThick coats are applied\u003c\/li\u003e\n\u003cli\u003eApplying over products from other brands\u003c\/li\u003e\n\u003cli\u003eLayering General Finishes water- and oil-based products:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eWater over oil: Let oil-based products dry 72+hrs before applying water-based products\u003c\/li\u003e\n\u003cli\u003eOil over water: Let water-based products dry 24+hrs before applying oil-based products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JGerHN_DwdU\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43843930128601,"sku":"GSB","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/EndurostainblockerGALLON.jpg?v=1756234224"},{"product_id":"general-finishes-water-based-high-performance-topcoat-gallon","title":"General Finishes Water-Based High Performance Topcoats - Gallon","description":"\u003cp\u003eHigh Performance is an all-purpose water-based topcoat finish for residential interior woodworking projects. With excellent all-around durability, it is designed for the DIY user or contractor who wants a professional-grade finish that is designed to be brushed, roller, or sprayed. High Performance is the best choice for high use areas such as table tops and kitchen cabinets. \u003c\/p\u003e\n\u003cp\u003eRecommended for interior cabinets, trim, doors, and furniture. Use over raw wood, stain, and non-white painted surfaces. Suitable for floors. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do not use High Performance or any other clear coat, over white or light paints such as Milk Paint or White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of General Finishes' White Paints, brush-able or spray versions, do not require a topcoat.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-5-gallon\" target=\"_blank\" title=\"General Finishes Water-Based High Performance Topcoats - 5 Gallon product page\" rel=\"noopener\"\u003e5 gallon pails\u003c\/a\u003e, \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-pint\" title=\"General Finishes Water Based High Performance Topcoats - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epints\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/gf-high-performance\" title=\"General Finishes Water Based High Performance Topcoats - Quart product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e \u003cspan\u003eand \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTint-able:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500-600 sq. ft. per gallon\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320 grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNewly stained surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDo not sand.\u003c\/li\u003e\n\u003cli\u003eApply directly to the stained surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of High Performance. More coats will not improve durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, staining pad or roller such as Whizz or AllPro Velour brand. Avoid pressure and excessive back brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks dry - they WILL tighten down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our general guide for spray tip sizes. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space. Read here for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames and drawers on cabinets:\u003c\/strong\u003e High Performance can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of High Performance Topcoat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Sheens:\u003c\/strong\u003e You mix can High Performance Topcoat sheens to adjust your sheen. For example, you can mix High Performance Flat and High Performance Gloss to obtain a different sheen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/fSAm4rsj6N8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Satin","offer_id":43845806915801,"sku":"GAHS","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":43845806948569,"sku":"GAHSG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Flat","offer_id":43845806981337,"sku":"GAHF","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":43845807014105,"sku":"GAHG","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Dead Flat","offer_id":48565989310681,"sku":"B745-L Gallon","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Satin-gallon.jpg?v=1679935341"},{"product_id":"general-finishes-water-based-high-performance-topcoats-pint","title":"General Finishes Water-Based High Performance Topcoats - Pint","description":"\u003cp\u003eHigh Performance is an all-purpose water-based topcoat finish for residential interior woodworking projects. With excellent all-around durability, it is designed for the DIY user or contractor who wants a professional-grade finish that is designed to be brushed, roller, or sprayed. High Performance is the best choice for high use areas such as table tops and kitchen cabinets. \u003c\/p\u003e\n\u003cp\u003eRecommended for interior cabinets, trim, doors, and furniture. Use over raw wood, stain, and non-white painted surfaces. Suitable for floors. \u003c\/p\u003e\n\u003cp\u003eDo not use High Performance or any other clear coat, over white or light paints such as Milk Paint or White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of General Finishes' White Paints, brush-able or spray versions do not require a topcoat.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water Based High Performance Topcoats - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/gf-high-performance\" target=\"_blank\"\u003equarts\u003c\/a\u003e, \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water Based High Performance Topcoats - Gallon product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoat-gallon\" target=\"_blank\"\u003egallons\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-high-performance-topcoats-5-gallon\" target=\"_blank\" title=\"General Finishes Water-Based High Performance Topcoats - 5 Gallon product page\" rel=\"noopener\"\u003e5 gallon pails\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" data-mce-fragment=\"1\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Color:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTint-able:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Urethane\/Acrylic Blend\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 65-75 sq. ft. per pint\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e High\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNewly stained surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDo not sand.\u003c\/li\u003e\n\u003cli\u003eApply directly to the stained surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 2-3 coats of High Performance. More coats will not improve durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount of product using a synthetic bristle brush, foam brush, pad applicator, staining pad or roller such as Whizz or AllPro Velour brand. Avoid pressure and excessive back brushing. Brush along the wood grain using smooth, even strokes with light lap marks. Let lap marks dry - they WILL tighten down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. See our general guide for spray tip sizes. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA-approved) and work in a ventilated space. Read here for more information on spraying techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace frames and drawers on cabinets:\u003c\/strong\u003e High Performance can be successfully applied by hand to cabinet face frames or edges with a brush, pad or small, cabinet-specific roller such as Whizz or AllPro Velour brand.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of High Performance Topcoat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eMixing Sheens:\u003c\/strong\u003e You mix can High Performance Topcoat sheens to adjust your sheen. For example, you can mix High Performance Flat and High Performance Gloss to obtain a different sheen.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Do not use water-based products with Linseed Oils or Danish Oils.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/fSAm4rsj6N8\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":43845808947417,"sku":"PTHF","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":43845809012953,"sku":"PTHS","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":43845809078489,"sku":"PTHSG","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":43845809144025,"sku":"PTHG","price":28.5,"currency_code":"USD","in_stock":true},{"title":"Dead Flat","offer_id":43914930618585,"sku":"B745-L Pint","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/High-Performance-Topcoat-Pint-Flat_79fbd662-ad78-4de6-a6d4-6c4a0312ece7.jpg?v=1679920503"},{"product_id":"general-finishes-water-based-flat-out-flat-topcoat-pint","title":"General Finishes Water-Based Flat Out Flat Topcoat - Pint","description":"\u003cp\u003eFlat Out Flat is a \"dead-flat\" finish for anyone wanting a very low-sheen appearance on their project. It mimics the waxed look of chalk-style paint. Because of its natural properties, it is not recommended for medium- or high-use pieces like furniture or cabinets.\u003c\/p\u003e\n\u003cp\u003eWant to improve the performance of your finish and still obtain a matte sheen? Use a semi-gloss sheen for the first 2 coats and a flat for the third for optimum performance. Alternatively, use \u003ca rel=\"noopener\" title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_water-based-top-coats\" target=\"_blank\"\u003eHigh Performance Water-Based Topcoat\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"All General Finishes Oil-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_oil-based-top-coats\" target=\"_blank\"\u003eArm-R-Seal Oil Based Topcoat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-gallon\" target=\"_blank\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Gallon product page\" rel=\"noopener\"\u003egallons\u003c\/a\u003e and \u003ca rel=\"noopener noreferrer\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Very Flat (1-5)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Self-crosslinking Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 65-75 sq. ft. per pint\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Low\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. No more than three coats is recommended. Additional coats will not improve durability. Flat Out Flat contains more matting agents to decrease the sheen, and the finish can get cloudy when excessive topcoats are applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure and back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of Flat Out Flat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, oil-free tack cloth, or clean water-dampened rag before re-coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43846295748825,"sku":"FPT","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Flat-out-Flat-Pint_4cbf5645-31bf-40fe-91f0-82c5f7623a83.jpg?v=1679935996"},{"product_id":"general-finishes-water-based-wood-stains-pint","title":"General Finishes Water-Based Wood Stains - Pint","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\"Natural\" is a pre-stain conditioner that does not have any colorant. Use it to control blotching on hard-to-stain woods such as maple, pine, and cherry before applying a water-based wood stain.\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Water-Based Wood Stains is one of the most advanced interior stains on the market. It provides uniform coverage with brilliant color over raw wood and sealed surfaces. GF Wood Stains use cutting-edge resin and pigment technology to offer DIY consumers and professionals an easy-to-use alternative to traditional oil-based products. They spread easily, can be repaired, can be blended effortlessly, and have plenty of open time.\u003c\/p\u003e\n\u003cp\u003eUsers can easily achieve dark, uniform colors on hard-to-stain woods like pine and maple. These stains can even be used over existing finishes much like an oil-based gel stain. The thicker formula allows controlled penetration, which will reduce blotching on softer woods.\u003c\/p\u003e\n\u003cp\u003eThe high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup, and noncombustible. Looking for a \"green\" environment-friendly finish? These stains are now formulated with more than 50% renewable resources formulated from sustainable materials that decrease the carbon footprint.\u003c\/p\u003e\n\u003cp\u003eSome grain raise is expected when using water‐based stains. Minimize this by wetting wood with water, allowing it to dry, and sanding smooth before staining. After staining and applying the first coat of topcoat, use caution not to sand through topcoat and damage the stain. Finish should be smooth after sanding the second coat of topcoat. You can also create toners by mixing with any General Finishes \u003ca title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-hardware-menu\/brand_general-finishes+type_water-based-top-coats\" target=\"_blank\"\u003eWater-Based Topcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca title=\"General Finishes Water-Based Wood Stains - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-wood-stains-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Water-Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.1 mm-1.3 mm\u003cbr\u003e\u003cstrong\u003eTopcoat required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry time - touch:\u003c\/strong\u003e  Raw Wood (30+ min.), Existing Finish (1+ hr.)\u003cbr\u003e\u003cstrong\u003eDry time - recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - recoat (applied over oil-based product):\u003c\/strong\u003e 24 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e 50-75 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExisting finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eAvoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320-grit) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of General Finishes Pre-Stain Conditioner Natural can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want. NOTES on softwoods such as Pine, Pawlonia, or Poplar, the use of Pre-Stain Conditioner will reduce blotchiness but not remove it entirely.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHand-application\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or microfiber roller. Work quickly.\u003c\/li\u003e\n\u003cli\u003eIf not enough stain is used, the surface may dry too quickly, causing an uneven appearance.\u003c\/li\u003e\n\u003cli\u003eOn large projects, leave a wet edge between sections to prevent lap lines until you can wipe all the excess off.\u003c\/li\u003e\n\u003cli\u003eStain one complete section at a time.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using cloth or an absorbent paper towel. Check for missed spots and lap marks before moving to the next section.\u003c\/li\u003e\n\u003cli\u003eDo NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eAnother coat will make the color darker but do not exceed two coats as that will create too much build of a low solids finish. Stains are designed to provide color but are not durable on their own.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions when using a WATER-BASED topcoat: 50-70% humidity, 70*F\/20*C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. When using with an OIL-BASED topcoat, allow 24 hours dry time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/batgtzeb9QM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Bdb301Mj084\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique Brown","offer_id":43846352503001,"sku":"WAPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Antique Oak","offer_id":43846352568537,"sku":"WOPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43846352634073,"sku":"WBPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Black Cherry","offer_id":43846352699609,"sku":"WKPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":43846352765145,"sku":"WYPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Cabernet","offer_id":43846352830681,"sku":"WZPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Espresso","offer_id":43846352896217,"sku":"WXPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Graphite","offer_id":43846352961753,"sku":"WJPT","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Graystone","offer_id":43846353027289,"sku":"WQPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Hickory","offer_id":43846353092825,"sku":"WHPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":43846353158361,"sku":"WNPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Onyx","offer_id":43846353223897,"sku":"WFPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Pecan","offer_id":43846353289433,"sku":"WPPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Provincial","offer_id":43846353354969,"sku":"WVPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Sedona","offer_id":43846353420505,"sku":"WSPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Tobacco","offer_id":43846353486041,"sku":"WTTP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Walnut","offer_id":43846353551577,"sku":"WWPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Whitewash","offer_id":43846353617113,"sku":"WIPT","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Antiquebrownpint.jpg?v=1749653135"},{"product_id":"general-finishes-clear-hard-wax-oil-pint","title":"General Finishes Clear Hard Wax Oil - Pint","description":"\u003cp\u003eThis is General Finishes' easiest finish ever! Hard Wax Oil is a high-quality urethane-solids polymer in a blend of oil \u0026amp; wax that enhances the natural look of wood. The urethane gives Hard Wax Oil improved chemical and mechanical properties over standard oil \u0026amp; wax finishes. The recommended use is for interior raw wood furniture, millwork \u0026amp; woodworking projects.\u003c\/p\u003e\n\u003cp\u003eWhat results you can expect? It will not crack or peel, can be buffed to a slightly higher sheen, and is very EASY to use. This is a maintenance product. Reapply when wear becomes evident.\u003c\/p\u003e\n\u003cp\u003eBest used with optional \u003ca title=\"General Finishes Hard Wax Oil Hardener product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-hard-wax-oil-hardener\" target=\"_blank\"\u003eGF Hardener\u003c\/a\u003e to improve durability and shorten dry time. The combination of Hard Wax Oil \u0026amp; Hardener provides superior durability, and chemical and water resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Oil \u0026amp; Wax\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior\u003cbr\u003e\u003cstrong\u003eSuggested Use:\u003c\/strong\u003e Furniture, millwork \u0026amp; woodworking projects\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Wipe on with synthetic non-woven pad, Trowel on with a blade applicator\u003cbr\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSprayable:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eDry Time (touch):\u003c\/strong\u003e Immediately\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 24+\u003cbr\u003e\u003cstrong\u003eCure Time:\u003c\/strong\u003e 5-7 days @ 70°F\/21°C, 50% humidity, dependent on number of coats and use of optional hardener\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 60 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Very Thick\u003cbr\u003e\u003cstrong\u003eVOC:\u003c\/strong\u003e \u0026lt;50 g\/L\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eSand with 120-grit sandpaper, followed by final 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003cli\u003eWipe surface down with mineral spirits on a clean cloth to remove dust from pores.\u003c\/li\u003e\n\u003cli\u003eAllow mineral spirits to dry before applying the GF Hard Wax Oil.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003cbr\u003e\n\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWith optional Hard Wax Oil Hardener, mix GF Hardener 10% by volume with GF Hard Wax Oil. For example, 1\/4 tsp. of Hardener per ounce of Hard Wax Oil or 1\/2 tsp. of Hardener per 2 fluid ounces of Hard Wax Oil. The finish can only be mixed once; mixed product will harden after 4-6 hours. The combination of Hard Wax Oil \u0026amp; Hardener provides the best overall durability, and chemical and water resistance. Do NOT use General Finishes NCO catalyst.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat with a trowel or non-woven synthetic pad. Spread evenly with a white non-woven pad or plastic spreader, one manageable section at a time. On large surfaces, use a white non-woven pad with a variable speed buffer or sander.\u003c\/li\u003e\n\u003cli\u003eLet rest for 5-10 minutes.\u003c\/li\u003e\n\u003cli\u003eWipe off excess evenly with the grain \u0026amp; with light pressure using a clean terry cloth. Follow with a clean white non-woven pad until the surface is dry and smooth.\u003c\/li\u003e\n\u003cli\u003eIf a second coat is needed, wait 24 hours. Prep the surface with a gray non-woven pad before applying.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIdeal conditions: 70°F\/21°C; 50% humidity. Cooler temperatures, and higher humidity may prolong dry time. Use of the Hardener will shorten dry times.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Yx0STJI5FV8\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43879108051161,"sku":"B807-UL Pint","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/hardwaxoilpint.jpg?v=1682110764"},{"product_id":"general-finishes-hard-wax-oil-hardener","title":"General Finishes Hard Wax Oil Hardener - 4 oz.","description":"\u003cp\u003eUse with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-clear-hard-wax-oil-pint\" target=\"_blank\" title=\"General Finishes Clear Hard Wax Oil - Pint product page\" rel=\"noopener noreferrer\"\u003eGeneral Finishes Hard Wax Oil\u003c\/a\u003e to improve durability and dry time.\u003c\/p\u003e\n\u003cp\u003e4oz. bottle.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":43882032824537,"sku":"A204","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Hardener.jpg?v=1682344472"},{"product_id":"general-finishes-enduro-water-based-tintable-2k-white-poly-gallon","title":"General Finishes Enduro Water-Based Tintable 2K White Poly - Gallon","description":"\u003cp\u003eEnduro Tintable 2K \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-water-based-tintable-2k-clear-poly-gallon\" target=\"_blank\" title=\"General Finishes Enduro Water-Based Tintable 2K Clear Poly - Gallon product page\" rel=\"noopener\"\u003eClear\u003c\/a\u003e and White Polys are General Finishes' most durable topcoats for any commercial application. Made for both interior and exterior projects, you can use 2K Poly on anything from cabinets and trim, to furniture and table tops. Key features include easy application, fast film build \u0026amp; production time, excellent adhesion, plus optimum water, and chemical resistance. Can be used over powder coatings, pre-primed steel, fiberglass, MDF, and all wood surfaces.\u003c\/p\u003e\n\u003cp\u003eIncludes NCO Catalyst.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of application:\u003c\/strong\u003e Whether in a shop or on the jobsite, Enduro 2K is designed to flow and level for professional\/industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTint-able:\u003c\/strong\u003e Can be tinted to any major manufacturer's color deck. Enduro 2K hits the deepest darks, brightest whites, and everything in between.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher gloss standards:\u003c\/strong\u003e Higher gloss for white and clear, with 90° on a 60° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast production time:\u003c\/strong\u003e Users can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Cures for use in 5 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast film build:\u003c\/strong\u003e Enduro 2K's are engineered with a combination of larger and smaller-sized resin particles. When combined with the catalyst, these resin particles allow for a thicker, quicker film build than any 1K. Provides a better vertical hang when spraying built-in surfaces on site, with fewer drips or sags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater- and chemical-resistant:\u003c\/strong\u003e Combining GF's resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that exceeds industry requirements and guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion:\u003c\/strong\u003e Sticks to many surfaces, including clean and prepped wood, fiberglass, and pre-primed steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior use:\u003c\/strong\u003e This finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables (do not use on deck surfaces).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage (per gallon):\u003c\/strong\u003e ~ 450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e High (600 - 800 cPs)\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eHVLP sizes:\u003c\/strong\u003e 1.1 - 1.3mm\u003cbr\u003e\u003cstrong\u003eAir-assist airless:\u003c\/strong\u003e 375 PSI pump, 20 PSI assist air\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat):\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eFull cure time:\u003c\/strong\u003e 5 days\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix thoroughly to reincorporate solids.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10% of the NCO Catalyst by volume (3.2 oz. per qt. \/ 12.8 oz. per gal.) to 2K Clear Poly while mixing with a power drill for 2-3 minutes.\u003c\/li\u003e\n\u003cli\u003eLet rest 15 minutes.\u003c\/li\u003e\n\u003cli\u003eStrain with fine-mesh filter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSpray wet films at 3-5 mil thickness.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide.\u003c\/li\u003e\n\u003cli\u003eFor narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad or gray non-woven abrasive pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ReYUDY7chuA?si=4vW7bnLXdVhhKuk4\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":44011862425817,"sku":"B793-L Gallon","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":44011862458585,"sku":"B792-L Gallon","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":44011862491353,"sku":"B791-L Gallon","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":44011862556889,"sku":"B790-L Gallon","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/white2kpolyMAIN.jpg?v=1774886258"},{"product_id":"general-finishes-enduro-white-poly-water-based-topcoat-quart","title":"General Finishes Enduro White Poly Water-Based Topcoat - Quart (Satin)","description":"\u003cp\u003eEnduro White Poly is a water-based topcoat for professionals and industrial facilities wanting a durable, fast-drying white cabinet finish. It is formulated to spray from the can without having to thin and builds quickly. Suitable for fiberglass, MDF, and all woods.\u003c\/p\u003e\n\u003cp\u003eUse over General Finishes \u003ca title=\"General Finishes Stain Blocker Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-stain-blocker-quart\" target=\"_blank\"\u003eStain Blocker\u003c\/a\u003e. White and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-clear-poly-water-based-topcoat-quart\" title=\"General Finishes Enduro Clear Poly Water-Based Topcoat - Quart product page\" target=\"_blank\"\u003eClear\u003c\/a\u003e can be used as tint bases to achieve most standard paint deck colors. Can be used as a stand alone finish!\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-white-poly-water-based-topcoat-gallon-satin\" title=\"General Finishes Enduro White Poly Water-Based Topcoat - Gallon (Satin) product page\" rel=\"noopener\" target=\"_blank\"\u003egallons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not use any type of clear topcoat over GF White Poly, as it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMeet or exceed KCMA standards\u003c\/li\u003e\n\u003cli\u003eSelf-crosslinking and self-sealing\u003c\/li\u003e\n\u003cli\u003eThinner formulation for easy spraying\u003c\/li\u003e\n\u003cli\u003eFast-drying, durable, and abrasion-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin\u003cbr\u003e\u003cstrong\u003eTint-able?:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eInterior\/Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eSpray tip size:\u003c\/strong\u003e HVLP 1.3 mm - 1.5 mm\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat)\u003c\/strong\u003e: 2+ hr.\u003cbr\u003e\u003cstrong\u003eDry time (light use):\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry time (cure):\u003c\/strong\u003e 21 days @ 70°F, 50% humidity\u003cbr\u003e\u003cstrong\u003eThin with:\u003c\/strong\u003e Water, \u003ca title=\"General Finishes Extender pint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-pint\" target=\"_blank\"\u003eGF Extender\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 112.5 sq. ft. per quart\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 600-800\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand with 120-grit sandpaper, followed by 150 or 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eBefore spraying, strain through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: .040, HVLP: .043 -.051 or Airless: .1 -.15.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray.\u003c\/li\u003e\n\u003cli\u003eOverlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" title=\"General Finishes Enduro Sanding Sealer - Quart product page\" target=\"_blank\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of White Poly.\u003c\/li\u003e\n\u003cli\u003eDry time is based on ideal conditions: 70°F\/21°C; 50% humidity. Tack free 5-10 minutes. Ready to sand 30-45 minutes. Recoat in 1-2 hours. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a 220-320 sanding sponge. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 sanding sponge to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UpYLul2Vos?si=X2GnhQjg5WDkdeJD\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":44667777286361,"sku":"B242-L Quart","price":43.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Endurowhitepolyquart-1.jpg?v=1731940756"},{"product_id":"general-finishes-enduro-clear-poly-water-based-topcoat-quart","title":"General Finishes Enduro Clear Poly Water-Based Topcoat - Quart (Satin)","description":"\u003cp\u003eA favorite of professional\/industrial finishers and OEM manufacturing facilities, Enduro Clear 1K Poly is a premium non-yellowing water-based self-crosslinking polyurethane-fortified topcoat that delivers a clear, tough, durable, and abrasion-resistant finish. It is clear drying, low odor, and easy to use.\u003c\/p\u003e\n\u003cp\u003eClear 1K Poly can be used on any project where more solids (28%) and durability are desired. It is the go-to General Finishes product for cabinet makers wanting more build, better application performance, and a superior look and feel than competitive water-based finishes on the market.\u003c\/p\u003e\n\u003cp\u003eFor white surfaces, use \u003ca title=\"General Finishes Enduro White Poly Water-Based Topcoat product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-white-poly-water-based-topcoat-quart\" target=\"_blank\"\u003eEnduro White Poly\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not use GF Enduro Clear Poly or any other clear coat, over white or light paints such as GF Milk Paint, or GF White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain or dye bleed-through. All of GF's White Paints, brushable or spray versions, do not require a topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin\u003cbr\u003e\u003cstrong\u003eTint-able?:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eInterior\/Exterior:\u003c\/strong\u003e\u003cspan\u003e Interior only\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eSpray tip size:\u003c\/strong\u003e HVLP 1.1 mm - 1.3 mm\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat)\u003c\/strong\u003e: 1+ hr.\u003cbr\u003e\u003cstrong\u003eDry time (light use):\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry time (cure):\u003c\/strong\u003e 21 days @ 70°F, 50% humidity\u003cbr\u003e\u003cstrong\u003eThin with:\u003c\/strong\u003e Water, \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-pint\" title=\"General Finishes Extender pint product page\" target=\"_blank\"\u003eGF Extender\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 112.5 sq. ft. per quart\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 350-450\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePre-Finished Wood \u0026amp; Sealed Surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eTest for color \u0026amp; adhesion over existing sealed surfaces.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with 10-15% by volume of \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-pint\" title=\"General Finishes Extender Pint product page\" target=\"_blank\"\u003eGeneral Finishes Extender\u003c\/a\u003e if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBefore spraying, strain through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: .040, HVLP: .043 -.051 or\u003c\/span\u003e\u003cspan\u003e Air-Assist Airless: 600 PSI pump, 20 PSI assist air, .011\" tip or Airless: fine finish .007\"-.011.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOverlap each pass 25% to conceal lines.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIf a faster build is desired over raw wood, use \u003c\/span\u003e\u003ca title=\"General Finishes Enduro Sanding Sealer - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" target=\"_blank\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e\u003cspan\u003e for the first coat, followed by 2 coats of Clear Poly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDry time is based on ideal conditions: 70°F\/21°C; 50% humidity. Tack free 5-10 minutes. Ready to sand 30-45 minutes. Recoat in 1-2 hours. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a 220-320 sanding sponge. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinish sand between coats with a 220-320 sanding sponge to improve smoothness and adhesion.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/3UpYLul2Vos?si=I3CPv-OVwQSAulNq\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":44668738142425,"sku":"B037-L Quart","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/B037-LQuartmain.jpg?v=1708542555"},{"product_id":"general-finishes-enduro-white-poly-water-based-topcoat-gallon-satin","title":"General Finishes Enduro White Poly Water-Based Topcoat - Gallon (Satin)","description":"\u003cp\u003eEnduro White Poly is a water-based topcoat for professionals and industrial facilities wanting a durable, fast-drying white cabinet finish. It is formulated to spray from the can without having to thin and builds quickly. Suitable for fiberglass, MDF, and all woods.\u003c\/p\u003e\n\u003cp\u003eUse over General Finishes \u003ca rel=\"noopener\" title=\"General Finishes Stain Blocker - Gallon product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-stain-blocker-gallon\" target=\"_blank\"\u003eStain Blocker\u003c\/a\u003e. White and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-clear-poly-water-based-topcoat-quart\" title=\"General Finishes Enduro Clear Poly Water-Based Topcoat - Quart product page\" target=\"_blank\"\u003eClear\u003c\/a\u003e can be used as tint bases to achieve most standard paint deck colors. Can be used as a stand alone finish!\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title=\"General Finishes Enduro White Poly Water-Based Topcoat - Quart (Satin) product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-white-poly-water-based-topcoat-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDo not use any type of clear topcoat over GF White Poly, as it may cause yellowing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMeet or exceed KCMA standards\u003c\/li\u003e\n\u003cli\u003eSelf-crosslinking and self-sealing\u003c\/li\u003e\n\u003cli\u003eThinner formulation for easy spraying\u003c\/li\u003e\n\u003cli\u003eFast-drying, durable, and abrasion-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Satin\u003cbr\u003e\u003cstrong\u003eTint-able?:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eInterior\/Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eSpray tip size:\u003c\/strong\u003e HVLP 1.3 mm - 1.5 mm\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat)\u003c\/strong\u003e: 2+ hr.\u003cbr\u003e\u003cstrong\u003eDry time (light use):\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry time (cure):\u003c\/strong\u003e 21 days @ 70°F, 50% humidity\u003cbr\u003e\u003cstrong\u003eThin with:\u003c\/strong\u003e Water, \u003ca title=\"General Finishes Extender pint product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-extender-pint\" target=\"_blank\"\u003eGF Extender\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 450 sq. ft. per gallon\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eViscosity (cPs):\u003c\/strong\u003e 600-800\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand with 120-grit sandpaper, followed by 150 or 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWear a mask and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eBefore spraying, strain through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: .040, HVLP: .043 -.051 or Airless: .1 -.15.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray.\u003c\/li\u003e\n\u003cli\u003eOverlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" title=\"General Finishes Enduro Sanding Sealer - Quart product page\" target=\"_blank\"\u003eGeneral Finishes Sanding Sealer\u003c\/a\u003e for the first coat, followed by 2 coats of White Poly.\u003c\/li\u003e\n\u003cli\u003eDry time is based on ideal conditions: 70°F\/21°C; 50% humidity. Tack free 5-10 minutes. Ready to sand 30-45 minutes. Recoat in 1-2 hours. Be sure to allow adequate dry time. You can tell if a water-based finish is dry if it forms a powder when lightly sanded with a 220-320 sanding sponge. If in doubt, wait longer. Rushing the dry time can cause \"blush,\" which is clouding in the finish due to moisture trapped between the layers.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a 220-320 sanding sponge to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UpYLul2Vos?si=X2GnhQjg5WDkdeJD\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":46152289616089,"sku":"B242-L Gallon","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Endurowhitepolygallon-1_cda8f7c4-90ad-4099-9757-b82dadf2ab28.jpg?v=1777047758"},{"product_id":"general-finishes-enduro-sanding-sealer-gallon","title":"General Finishes Enduro Sanding Sealer - Gallon","description":"\u003cp\u003eGeneral Finishes Enduro Sanding Sealer is a clear, water-based acrylic undercoat with strong adhesion that forms an easily sand-able foundation for your project. It provides initial sealing for all water based topcoats and can be used over raw wood or a stained surface. This fast-drying pre-catalyzed sealer is designed as a basecoat for General Finishes topcoats. It's high solids content builds a fast film. Engineered for cabinets \u0026amp; millwork, it can be brushed, rolled, or sprayed. Dries tack-free in 5-10 minutes in ideal conditions.\u003c\/p\u003e\n\u003cp\u003eThere are four benefits to using sanding sealer as the first seal coat prior to topcoat:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFaster production time. Sanding sealer is a softer finish designed for faster sanding and faster drying.\u003c\/li\u003e\n\u003cli\u003eSave money - it costs less than topcoat if your project warrants purchasing a third product.\u003c\/li\u003e\n\u003cli\u003eThe film builds (thickness) faster because the particle size is larger.\u003c\/li\u003e\n\u003cli\u003eIt has strong adhesion properties. It does not stop tannin or dye bleed through, but it definitely improves adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHowever, it only makes sense if your project is large enough to warrant the purchase of a third product or you are a professional volume user. Sanding Sealer is not as durable as General Finishes topcoats, so it is not recommended for a final finish.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title=\"General Finishes Enduro Sanding Sealer - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-sanding-sealer-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e. Don't forget your \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" title=\"All Finishing Applicators\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Gloss (80+)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTint-able:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1 - 2 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Spray, Brush, Roll\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP- .043-.051 Medium Air Cap\u003cbr\u003e\u003cstrong\u003eTopcoat Required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure: \u003c\/strong\u003e21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 400-500 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium, 350-450 cPs\u003cbr\u003e\u003cstrong\u003eVOC: \u003c\/strong\u003e\u0026lt;250 g\/L\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Medium\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir Enduro Sanding Sealer thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003c\/li\u003e\n\u003cli\u003eTest for adhesion when applying over an existing finish.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with10-15% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. \u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eApply 1-2 coats. We recommend no more than 2 coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Enduro Sanding Sealer is engineered to spray but can be applied successfully applied by hand. Apply a liberal amount using a synthetic bristle or foam brush, pad applicator, or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure \u0026amp; back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray Application:\u003c\/strong\u003e Ready to spray from container. Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. Medium air cap. Compressed air: .040, HVLP: .043-.051 or Airless: .009-.123 . Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space. Finish sand between coats with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper to improve smoothness and adhesion.\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil free tack cloth or water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eApply topcoat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sJFmDa9K1KY\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":46330657013977,"sku":"SSS1","price":75.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/sandingsealergallon_2fbd8f5e-9f41-40ee-8052-b0483b644f06.jpg?v=1737476139"},{"product_id":"general-finishes-brush-gun-cleaner-1-gallon","title":"General Finishes Brush \u0026 Spray Gun Cleaner - 1 Gallon","description":"\u003cp\u003eKeep your spray guns and brushes operating at peak performance with General Finishes Brush \u0026amp; Gun Cleaner. GF Brush \u0026amp; Gun Cleaner chemically breaks down water-based paint and top coat whereas soap and water can leave residue behind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Do \u003cstrong\u003enot\u003c\/strong\u003e use on oil-based products.\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":46369902756057,"sku":"B018-F-Arc","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/brush_guncleaner_f46d2474-e03f-4f42-a30a-47417165d102.jpg?v=1775056090"},{"product_id":"general-finishes-enduro-water-based-tintable-2k-clear-poly-gallon","title":"General Finishes Enduro Water-Based Tintable 2K Clear Poly - Gallon","description":"\u003cp\u003eEnduro Tintable 2K Clear and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-water-based-tintable-2k-white-poly-gallon\" target=\"_blank\" title=\"General Finishes Enduro Water-Based Tintable 2K White Poly - Gallon product page\" rel=\"noopener\"\u003eWhite\u003c\/a\u003e Polys are General Finishes' most durable topcoats for any commercial application. Made for both interior and exterior projects, you can use 2K Poly on anything from cabinets and trim, to furniture and table tops. Key features include easy application, fast film build \u0026amp; production time, excellent adhesion, plus optimum water, and chemical resistance. Can be used over powder coatings, pre-primed steel, fiberglass, MDF, and all wood surfaces.\u003c\/p\u003e\n\u003cp\u003eIncludes NCO Catalyst.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of application:\u003c\/strong\u003e Whether in a shop or on the jobsite, Enduro 2K is designed to flow and level for professional\/industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTint-able:\u003c\/strong\u003e Can be tinted to any major manufacturer's color deck. Enduro 2K hits the deepest darks, brightest whites, and everything in between.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher gloss standards:\u003c\/strong\u003e Higher gloss for white and clear, with 90° on a 60° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast production time:\u003c\/strong\u003e Users can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Cures for use in 5 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast film build:\u003c\/strong\u003e Enduro 2K's are engineered with a combination of larger and smaller-sized resin particles. When combined with the catalyst, these resin particles allow for a thicker, quicker film build than any 1K. Provides a better vertical hang when spraying built-in surfaces on site, with fewer drips or sags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater- and chemical-resistant:\u003c\/strong\u003e Combining GF's resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that exceeds industry requirements and guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion:\u003c\/strong\u003e Sticks to many surfaces, including clean and prepped wood, fiberglass, and pre-primed steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior use:\u003c\/strong\u003e This finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables (do not use on deck surfaces).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage (per gallon):\u003c\/strong\u003e ~ 450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e High (600 - 800 cPs)\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eHVLP sizes:\u003c\/strong\u003e 1.1 - 1.3mm\u003cbr\u003e\u003cstrong\u003eAir-assist airless:\u003c\/strong\u003e 375 PSI pump, 20 PSI assist air\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat):\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eFull cure time:\u003c\/strong\u003e 5 days\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix thoroughly to reincorporate solids.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10% of the NCO Catalyst by volume (3.2 oz. per qt. \/ 12.8 oz. per gal.) to 2K Clear Poly while mixing with a power drill for 2-3 minutes.\u003c\/li\u003e\n\u003cli\u003eLet rest 15 minutes.\u003c\/li\u003e\n\u003cli\u003eStrain with fine-mesh filter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSpray wet films at 3-5 mil thickness.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide.\u003c\/li\u003e\n\u003cli\u003eFor narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad or gray non-woven abrasive pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ReYUDY7chuA?si=4vW7bnLXdVhhKuk4\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":48472220401881,"sku":"B789-L Gallon","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":48472220434649,"sku":"B788-L Gallon","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":48472220467417,"sku":"B787-L Gallon","price":154.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":48472220500185,"sku":"B786-L Gallon","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/endurro2kpolyclearMAIN.jpg?v=1774885075"},{"product_id":"general-finishes-enduro-water-based-tintable-2k-clear-poly-5-gallon","title":"General Finishes Enduro Water-Based Tintable 2K Clear Poly - 5 Gallon","description":"\u003cp\u003eEnduro Tintable 2K Clear and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-water-based-tintable-2k-white-poly-5-gallon\" target=\"_blank\" title=\"General Finishes Enduro Water-Based Tintable 2K White Poly - 5 Gallon product page\" rel=\"noopener\"\u003eWhite\u003c\/a\u003e Polys are General Finishes' most durable topcoats for any commercial application. Made for both interior and exterior projects, you can use 2K Poly on anything from cabinets and trim, to furniture and table tops. Key features include easy application, fast film build \u0026amp; production time, excellent adhesion, plus optimum water, and chemical resistance. Can be used over powder coatings, pre-primed steel, fiberglass, MDF, and all wood surfaces.\u003c\/p\u003e\n\u003cp\u003eIncludes NCO Catalyst.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of application:\u003c\/strong\u003e Whether in a shop or on the jobsite, Enduro 2K is designed to flow and level for professional\/industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTint-able:\u003c\/strong\u003e Can be tinted to any major manufacturer's color deck. Enduro 2K hits the deepest darks, brightest whites, and everything in between.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher gloss standards:\u003c\/strong\u003e Higher gloss for white and clear, with 90° on a 60° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast production time:\u003c\/strong\u003e Users can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Cures for use in 5 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast film build:\u003c\/strong\u003e Enduro 2K's are engineered with a combination of larger and smaller-sized resin particles. When combined with the catalyst, these resin particles allow for a thicker, quicker film build than any 1K. Provides a better vertical hang when spraying built-in surfaces on site, with fewer drips or sags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater- and chemical-resistant:\u003c\/strong\u003e Combining GF's resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that exceeds industry requirements and guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion:\u003c\/strong\u003e Sticks to many surfaces, including clean and prepped wood, fiberglass, and pre-primed steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior use:\u003c\/strong\u003e This finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables (do not use on deck surfaces).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage (per gallon):\u003c\/strong\u003e ~ 450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e High (600 - 800 cPs)\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eHVLP sizes:\u003c\/strong\u003e 1.1 - 1.3mm\u003cbr\u003e\u003cstrong\u003eAir-assist airless:\u003c\/strong\u003e 375 PSI pump, 20 PSI assist air\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat):\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eFull cure time:\u003c\/strong\u003e 5 days\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix thoroughly to reincorporate solids.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10% of the NCO Catalyst by volume (3.2 oz. per qt. \/ 12.8 oz. per gal.) to 2K Clear Poly while mixing with a power drill for 2-3 minutes.\u003c\/li\u003e\n\u003cli\u003eLet rest 15 minutes.\u003c\/li\u003e\n\u003cli\u003eStrain with fine-mesh filter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSpray wet films at 3-5 mil thickness.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide.\u003c\/li\u003e\n\u003cli\u003eFor narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad or gray non-woven abrasive pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ReYUDY7chuA?si=4vW7bnLXdVhhKuk4\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":48472683446489,"sku":"B789-5 Gallon Pail P","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":48472683479257,"sku":"B788- 5 Gallon Pail P","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":48472683512025,"sku":"B787-5 Gallon Pail P","price":720.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":48472683544793,"sku":"B786-5 Gallon Pail P","price":720.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/enduro2kpolyclear5galMAIN.jpg?v=1774891988"},{"product_id":"general-finishes-enduro-water-based-tintable-2k-white-poly-5-gallon","title":"General Finishes Enduro Water-Based Tintable 2K White Poly - 5 Gallon","description":"\u003cp\u003eEnduro Tintable 2K \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-enduro-water-based-tintable-2k-clear-poly-5-gallon\" target=\"_blank\" title=\"General Finishes Enduro Water-Based Tintable 2K Clear Poly - 5 Gallon product page\" rel=\"noopener\"\u003eClear\u003c\/a\u003e and White Polys are General Finishes' most durable topcoats for any commercial application. Made for both interior and exterior projects, you can use 2K Poly on anything from cabinets and trim, to furniture and table tops. Key features include easy application, fast film build \u0026amp; production time, excellent adhesion, plus optimum water, and chemical resistance. Can be used over powder coatings, pre-primed steel, fiberglass, MDF, and all wood surfaces.\u003c\/p\u003e\n\u003cp\u003eIncludes NCO Catalyst.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of application:\u003c\/strong\u003e Whether in a shop or on the jobsite, Enduro 2K is designed to flow and level for professional\/industrial users that apply with AAA, HVLP, Airless, or flatline systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTint-able:\u003c\/strong\u003e Can be tinted to any major manufacturer's color deck. Enduro 2K hits the deepest darks, brightest whites, and everything in between.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher gloss standards:\u003c\/strong\u003e Higher gloss for white and clear, with 90° on a 60° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast production time:\u003c\/strong\u003e Users can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Cures for use in 5 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast film build:\u003c\/strong\u003e Enduro 2K's are engineered with a combination of larger and smaller-sized resin particles. When combined with the catalyst, these resin particles allow for a thicker, quicker film build than any 1K. Provides a better vertical hang when spraying built-in surfaces on site, with fewer drips or sags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater- and chemical-resistant:\u003c\/strong\u003e Combining GF's resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that exceeds industry requirements and guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion:\u003c\/strong\u003e Sticks to many surfaces, including clean and prepped wood, fiberglass, and pre-primed steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior use:\u003c\/strong\u003e This finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables (do not use on deck surfaces).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage (per gallon):\u003c\/strong\u003e ~ 450 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e High (600 - 800 cPs)\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Spray\u003cbr\u003e\u003cstrong\u003eHVLP sizes:\u003c\/strong\u003e 1.1 - 1.3mm\u003cbr\u003e\u003cstrong\u003eAir-assist airless:\u003c\/strong\u003e 375 PSI pump, 20 PSI assist air\u003cbr\u003e\u003cstrong\u003eDry time (touch):\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry time (recoat):\u003c\/strong\u003e 1+ hr.\u003cbr\u003e\u003cstrong\u003eFull cure time:\u003c\/strong\u003e 5 days\u003c\/p\u003e\n\u003ch5\u003eInstructions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix thoroughly to reincorporate solids.\u003c\/li\u003e\n\u003cli\u003eSlowly add 10% of the NCO Catalyst by volume (3.2 oz. per qt. \/ 12.8 oz. per gal.) to 2K Clear Poly while mixing with a power drill for 2-3 minutes.\u003c\/li\u003e\n\u003cli\u003eLet rest 15 minutes.\u003c\/li\u003e\n\u003cli\u003eStrain with fine-mesh filter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSpray wet films at 3-5 mil thickness.\u003c\/li\u003e\n\u003cli\u003eKeep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide.\u003c\/li\u003e\n\u003cli\u003eFor narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad or gray non-woven abrasive pad to improve smoothness and adhesion.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ReYUDY7chuA?si=4vW7bnLXdVhhKuk4\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Flat","offer_id":48473546916057,"sku":"B793-5 Gallon Pail P","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Satin","offer_id":48473546948825,"sku":"B792-5 Gallon Pail P","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Gloss","offer_id":48473546981593,"sku":"B791-5 Gallon Pail P","price":738.0,"currency_code":"USD","in_stock":true},{"title":"Gloss","offer_id":48473547014361,"sku":"B790-5 Gallon Pail P","price":738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/2kpolywhite5galMAIN.jpg?v=1774893624"},{"product_id":"general-finishes-water-based-flat-out-flat-topcoat-gallon","title":"General Finishes Water-Based Flat Out Flat Topcoat - Gallon","description":"\u003cp\u003eFlat Out Flat is a \"dead-flat\" finish for anyone wanting a very low-sheen appearance on their project. It mimics the waxed look of chalk-style paint. Because of its natural properties, it is not recommended for medium- or high-use pieces like furniture or cabinets.\u003c\/p\u003e\n\u003cp\u003eWant to improve the performance of your finish and still obtain a matte sheen? Use a semi-gloss sheen for the first 2 coats and a flat for the third for optimum performance. Alternatively, use \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_water-based-top-coats\" title=\"All General Finishes Water-Based Topcoats\" rel=\"noopener\" target=\"_blank\"\u003eHigh Performance Water-Based Topcoat\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/type_oil-based-top-coats\" title=\"All General Finishes Oil-Based Topcoats\" rel=\"noopener\" target=\"_blank\"\u003eArm-R-Seal Oil Based Topcoat\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-quart\" target=\"_blank\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Quart product page\" rel=\"noopener\"\u003equarts\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-flat-out-flat-topcoat-pint\" title=\"General Finishes Water-Based Flat Out Flat Topcoat - Pint product page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget your \u003c\/span\u003e\u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca title=\"All Sanding \u0026amp; Abrasives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Colors:\u003c\/strong\u003e Water White in can (dries clear)\u003cbr\u003e\u003cstrong\u003eBase Type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eAmbering:\u003c\/strong\u003e No\u003cbr\u003e\u003cstrong\u003eSheen:\u003c\/strong\u003e Very Flat (1-5)\u003cbr\u003e\u003cstrong\u003eInterior or Exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eTintable:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Self-crosslinking Acrylic\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 3 coats\u003cbr\u003e\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Brush, Roll, Spray\u003cbr\u003e\u003cstrong\u003eUsable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray Tip Sizes:\u003c\/strong\u003e HVLP 1.1mm-1.3mm\u003cbr\u003e\u003cstrong\u003eDry Time - Touch:\u003c\/strong\u003e 30+ min.\u003cbr\u003e\u003cstrong\u003eDry Time - Recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry Time - Light Use:\u003c\/strong\u003e 7-10 days\u003cbr\u003e\u003cstrong\u003eDry Time - Cure:\u003c\/strong\u003e 21 days\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 500-600 sq. ft. per gallon\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003cbr\u003e\u003cstrong\u003eDurability (Highest, High, Medium, Low):\u003c\/strong\u003e Low\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand no finer than 220 grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSealed Surface\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a non-woven abrasive pad \u0026amp; 50:50 mix of denatured alcohol \u0026amp; water.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with 220-320-grit sanding sponge.\u003c\/li\u003e\n\u003cli\u003eRemove dust.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eStir thoroughly to reincorporate solids that have settled to the bottom of the can before and throughout the application process. Do not shake.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply 3 coats. No more than three coats is recommended. Additional coats will not improve durability. Flat Out Flat contains more matting agents to decrease the sheen, and the finish can get cloudy when excessive topcoats are applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand application:\u003c\/strong\u003e Apply a liberal amount using a synthetic bristle brush, foam brush, pad applicator or roller with smooth, even strokes \u0026amp; light lap lines. Avoid heavy pressure and back-brushing. Lap lines will tighten down as they dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray application:\u003c\/strong\u003e Before spraying, strain topcoat through a fine-mesh filter. Spray wet films at 3-5-mil thickness. HVLP: 1.1mm-1.3mm spray tip, medium air cap. Verify tip sizes with your equipment supplier. Keep your gun at a 90° angle, 6-8\" from the surface. On large, flat areas, use wet, even patterns 6-8\" wide. For narrow surfaces, reduce the fan pattern to 2-3\" wide to reduce overspray. Overlap each pass 25% to conceal lines. Wear a full filter respirator (NIOSH\/MSHA approved) and work in a ventilated space.\u003c\/li\u003e\n\u003cli\u003eIf a faster build is desired over raw wood, use General Finishes Sanding Sealer for the first coat, followed by 2 coats of Flat Out Flat.\u003c\/li\u003e\n\u003cli\u003eFinish sand between coats with a fine-grade (220-320) foam sanding pad to improve smoothness and adhesion. Do not use conventional steel wool.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, oil-free tack cloth, or clean water-dampened rag before re-coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Default Title","offer_id":48565746434265,"sku":"B489-L Gallon","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/flatoutflatgallon.jpg?v=1777037119"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/general-finishes\/price_-500-to-1000.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}