{"title":"General Finishes Water-Based Wood Stains","description":"","products":[{"product_id":"general-finishes-water-based-wood-stains-quart","title":"General Finishes Water-Based Wood Stains - Quart","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\"Natural\" is a pre-stain conditioner that does not have any colorant. Use it to control blotching on hard-to-stain woods such as maple, pine and cherry before applying a water-based wood stain.\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Water-Based Wood Stains is one of the most advanced interior stains on the market. It provides uniform coverage with brilliant color over raw wood and sealed surfaces. GF Wood Stains use cutting-edge resin and pigment technology to offer DIY consumers and professionals an easy-to-use alternative to traditional oil-based products. They spread easily, can be repaired, can be blended effortlessly, and have plenty of open time.\u003c\/p\u003e\n\u003cp\u003eUsers can easily achieve dark, uniform colors on hard-to-stain woods like pine and maple. These stains can even be used over existing finishes much like an oil-based gel stain. The thicker formula allows controlled penetration, which will reduce blotching on softer woods.\u003c\/p\u003e\n\u003cp\u003eThe high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup, and noncombustible. Looking for a \"green\" environment-friendly finish? These stains are now formulated with more than 50% renewable resources formulated from sustainable materials that decrease the carbon footprint.\u003c\/p\u003e\n\u003cp\u003eSome grain raise is expected when using water‐based stains. Minimize this by wetting wood with water, allowing it to dry, and sanding smooth before staining. After staining and applying the first coat of topcoat, use caution not to sand through topcoat and damage the stain. Finish should be smooth after sanding the second coat of topcoat. You can also create toners by mixing with any General Finishes \u003ca title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-hardware-menu\/brand_general-finishes+type_water-based-top-coats\" target=\"_blank\"\u003eWater-Based Topcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-wood-stains-pint\" title=\"General Finishes Water-Based Wood Stains - Pint product page\" target=\"_blank\"\u003epints\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip\u003c\/strong\u003e: Do not apply with a rag or cloth. If stain is drying too quickly, apply more stain to re-wet the surface. For deeper color, a 2nd coat can be applied after the 1st coat has dried completely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Water-Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.1 mm-1.3 mm\u003cbr\u003e\u003cstrong\u003eTopcoat required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry time - touch:\u003c\/strong\u003e  Raw Wood (30+ min.), Existing Finish (1+ hr.)\u003cbr\u003e\u003cstrong\u003eDry time - recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - recoat (applied over oil-based product):\u003c\/strong\u003e 24 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e100-150 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eExisting finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eAvoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320-grit) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of General Finishes Pre-Stain Conditioner Natural can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want. NOTES on softwoods such as Pine, Pawlonia, or Poplar, the use of Pre-Stain Conditioner will reduce blotchiness but not remove it entirely.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHand-application\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or microfiber roller. Work quickly.\u003c\/li\u003e\n\u003cli\u003eIf not enough stain is used, the surface may dry too quickly, causing an uneven appearance.\u003c\/li\u003e\n\u003cli\u003eOn large projects, leave a wet edge between sections to prevent lap lines until you can wipe all the excess off.\u003c\/li\u003e\n\u003cli\u003eStain one complete section at a time.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using cloth or an absorbent paper towel. Check for missed spots and lap marks before moving to the next section.\u003c\/li\u003e\n\u003cli\u003eDo NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eAnother coat will make the color darker but do not exceed two coats as that will create too much build of a low solids finish. Stains are designed to provide color but are not durable on their own.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions when using a WATER-BASED topcoat: 50-70% humidity, 70*F\/20*C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. When using with an OIL-BASED topcoat, allow 24 hours dry time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/batgtzeb9QM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Bdb301Mj084\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique Brown","offer_id":29437461856374,"sku":"WAQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Antique Oak","offer_id":21935892627574,"sku":"WOQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":21935892660342,"sku":"WBQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black Cherry","offer_id":21935892693110,"sku":"WKQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":21935892725878,"sku":"WYQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Cabernet","offer_id":29437461921910,"sku":"WZQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Espresso","offer_id":21935892824182,"sku":"WXQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Graphite","offer_id":29437461987446,"sku":"WJQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Graystone","offer_id":29437462380662,"sku":"WQQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Hickory","offer_id":29437462675574,"sku":"WHQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":21935892889718,"sku":"WNQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Onyx","offer_id":29437462741110,"sku":"WFQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Pecan","offer_id":21935892922486,"sku":"WPQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Provincial","offer_id":29437462839414,"sku":"WVQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Sedona","offer_id":29437463068790,"sku":"WSQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Tobacco","offer_id":29437463199862,"sku":"WTTQ","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Walnut","offer_id":21935893020790,"sku":"WWQT","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Whitewash","offer_id":21935893053558,"sku":"WIQT","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/woodstain-quart.jpg?v=1704729237"},{"product_id":"general-finishes-water-based-wood-stains-pint","title":"General Finishes Water-Based Wood Stains - Pint","description":"\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\"Natural\" is a pre-stain conditioner that does not have any colorant. Use it to control blotching on hard-to-stain woods such as maple, pine, and cherry before applying a water-based wood stain.\u003c\/p\u003e\n\u003cp\u003eGeneral Finishes Water-Based Wood Stains is one of the most advanced interior stains on the market. It provides uniform coverage with brilliant color over raw wood and sealed surfaces. GF Wood Stains use cutting-edge resin and pigment technology to offer DIY consumers and professionals an easy-to-use alternative to traditional oil-based products. They spread easily, can be repaired, can be blended effortlessly, and have plenty of open time.\u003c\/p\u003e\n\u003cp\u003eUsers can easily achieve dark, uniform colors on hard-to-stain woods like pine and maple. These stains can even be used over existing finishes much like an oil-based gel stain. The thicker formula allows controlled penetration, which will reduce blotching on softer woods.\u003c\/p\u003e\n\u003cp\u003eThe high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. Low odor, low VOC, water cleanup, and noncombustible. Looking for a \"green\" environment-friendly finish? These stains are now formulated with more than 50% renewable resources formulated from sustainable materials that decrease the carbon footprint.\u003c\/p\u003e\n\u003cp\u003eSome grain raise is expected when using water‐based stains. Minimize this by wetting wood with water, allowing it to dry, and sanding smooth before staining. After staining and applying the first coat of topcoat, use caution not to sand through topcoat and damage the stain. Finish should be smooth after sanding the second coat of topcoat. You can also create toners by mixing with any General Finishes \u003ca title=\"All General Finishes Water-Based Topcoats\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-hardware-menu\/brand_general-finishes+type_water-based-top-coats\" target=\"_blank\"\u003eWater-Based Topcoats\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca title=\"General Finishes Water-Based Wood Stains - Quart product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/general-finishes-water-based-wood-stains-quart\" target=\"_blank\"\u003equarts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDon't forget your \u003ca title=\"All Finishing Applicators\" href=\"https:\/\/www.oaktreesupply.com\/collections\/finishing-applicators-menu\" target=\"_blank\"\u003ebrushes\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/sanding-abrasives-menu\" title=\"All Sanding \u0026amp; Abrasives\" target=\"_blank\"\u003esandpaper\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Colors shown are for reference only. Your results may vary based on species, grain, sanding, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Notice:\u003c\/strong\u003e During periods of extreme cold, OakTree may temporarily hold water-based products to prevent them from freezing during transit. As a result, shipping times may vary based on local and national weather conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBase type:\u003c\/strong\u003e Water\u003cbr\u003e\u003cstrong\u003eInterior or exterior:\u003c\/strong\u003e Interior only\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Water-Based Stain\u003cbr\u003e\u003cstrong\u003eCoats:\u003c\/strong\u003e 1+ coats\u003cbr\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Brush, Roll, Spray, Pad\u003cbr\u003e\u003cstrong\u003eUseable over existing finishes:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eSpray tip sizes:\u003c\/strong\u003e HVLP 1.1 mm-1.3 mm\u003cbr\u003e\u003cstrong\u003eTopcoat required:\u003c\/strong\u003e Yes\u003cbr\u003e\u003cstrong\u003eDry time - touch:\u003c\/strong\u003e  Raw Wood (30+ min.), Existing Finish (1+ hr.)\u003cbr\u003e\u003cstrong\u003eDry time - recoat:\u003c\/strong\u003e 2+ hrs.\u003cbr\u003e\u003cstrong\u003eDry time - recoat (applied over oil-based product):\u003c\/strong\u003e 24 hrs.\u003cbr\u003e\u003cstrong\u003eCoverage: \u003c\/strong\u003e 50-75 sq. ft.\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium\u003c\/p\u003e\n\u003ch5\u003ePreparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRaw wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand open-grain wood (e.g., oak, ash, mahogany, parawood) with 120-grit sandpaper, followed by 150-grit, then 180-grit.\u003c\/li\u003e\n\u003cli\u003eSand closed-grain wood (e.g., cherry, pine, maple, birch, alder) with 150-grit sandpaper followed by 220-grit.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExisting finish\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScuff clean with a Scotch-Brite pad or maroon synthetic steel wool and a 50:50 mix of denatured alcohol and water.\u003c\/li\u003e\n\u003cli\u003eAvoid cleaning with products containing phosphates (salt), which can linger in the substrate and produce a white haze. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below.\u003c\/li\u003e\n\u003cli\u003eDry 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly with a fine-grade (220-320-grit) foam sanding sponge or 400-grit sandpaper.\u003c\/li\u003e\n\u003cli\u003eRemove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag.\u003c\/li\u003e\n\u003cli\u003eLet dry completely before applying General Finishes product.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDirections\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eWork in a well-ventilated area.\u003c\/li\u003e\n\u003cli\u003eStir stain to reincorporate solids that have settled to the bottom of the can before and throughout the application process.\u003c\/li\u003e\n\u003cli\u003eThin as desired with distilled water; start with 5%, adding up to 10% by volume.\u003c\/li\u003e\n\u003cli\u003eIncrease open time, if needed, with up to 5% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates. California Residents: Adding more than 2% of GF Extender will make the products non-compliant per SCAQMD Regulations. GF assumes no liability for the improper use of these products.\u003c\/li\u003e\n\u003cli\u003eAn initial coat of General Finishes Pre-Stain Conditioner Natural can improve color uniformity over difficult-to-stain wood species such as pine. However, it will limit color absorption, so a darker stain may be required to get the depth of color you want. NOTES on softwoods such as Pine, Pawlonia, or Poplar, the use of Pre-Stain Conditioner will reduce blotchiness but not remove it entirely.\u003c\/li\u003e\n\u003cli\u003eTest your complete finishing process beforehand. Stain color can be affected by variances in wood, room lighting, and deepened with the application of topcoat.\u003c\/li\u003e\n\u003cli\u003eDivide your project into manageable sections: top, side, drawer, door, table seam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHand-application\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply a LIBERAL amount of stain to ensure easy workability using a synthetic bristle brush, foam brush, pad applicator or microfiber roller. Work quickly.\u003c\/li\u003e\n\u003cli\u003eIf not enough stain is used, the surface may dry too quickly, causing an uneven appearance.\u003c\/li\u003e\n\u003cli\u003eOn large projects, leave a wet edge between sections to prevent lap lines until you can wipe all the excess off.\u003c\/li\u003e\n\u003cli\u003eStain one complete section at a time.\u003c\/li\u003e\n\u003cli\u003eWipe off the excess evenly with the grain using cloth or an absorbent paper towel. Check for missed spots and lap marks before moving to the next section.\u003c\/li\u003e\n\u003cli\u003eDo NOT use cotton t-shirts to wipe away stain because they will \"push\" the stain around and not absorb it.\u003c\/li\u003e\n\u003cli\u003ePull excess stain out of corners and details with a synthetic bristle brush.\u003c\/li\u003e\n\u003cli\u003eImmediately correct lap marks by rewetting the entire working area with stain and wiping off the excess.\u003c\/li\u003e\n\u003cli\u003eAnother coat will make the color darker but do not exceed two coats as that will create too much build of a low solids finish. Stains are designed to provide color but are not durable on their own.\u003c\/li\u003e\n\u003cli\u003eLet the stain dry 2+ hours in ideal conditions when using a WATER-BASED topcoat: 50-70% humidity, 70*F\/20*C before adding a second coat (optional) and before adding topcoat. Be sure to allow adequate dry time. If in doubt, wait longer. When using with an OIL-BASED topcoat, allow 24 hours dry time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/batgtzeb9QM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Bdb301Mj084\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"General Finishes","offers":[{"title":"Antique Brown","offer_id":43846352503001,"sku":"WAPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Antique Oak","offer_id":43846352568537,"sku":"WOPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43846352634073,"sku":"WBPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Black Cherry","offer_id":43846352699609,"sku":"WKPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Brown Mahogany","offer_id":43846352765145,"sku":"WYPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Cabernet","offer_id":43846352830681,"sku":"WZPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Espresso","offer_id":43846352896217,"sku":"WXPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Graphite","offer_id":43846352961753,"sku":"WJPT","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Graystone","offer_id":43846353027289,"sku":"WQPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Hickory","offer_id":43846353092825,"sku":"WHPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Natural","offer_id":43846353158361,"sku":"WNPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Onyx","offer_id":43846353223897,"sku":"WFPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Pecan","offer_id":43846353289433,"sku":"WPPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Provincial","offer_id":43846353354969,"sku":"WVPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Sedona","offer_id":43846353420505,"sku":"WSPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Tobacco","offer_id":43846353486041,"sku":"WTTP","price":25.5,"currency_code":"USD","in_stock":false},{"title":"Walnut","offer_id":43846353551577,"sku":"WWPT","price":25.5,"currency_code":"USD","in_stock":true},{"title":"Whitewash","offer_id":43846353617113,"sku":"WIPT","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Antiquebrownpint.jpg?v=1749653135"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/general-finishes-water-based-wood-stains\/price_-25-to-50.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}