{"title":"All Drill Accessories","description":"","products":[{"product_id":"snug-plug-cutter","title":"Veritas Snug-Plug Cutters","description":"\u003cp\u003eVeritas Snug-Plug Cutters are designed to cut slightly tapered plugs. The first portion of the plug is the stated size and then flares out at a 3° included angle for a tight fit. The rounded tip ensures easy entry and adequate pressure before the taper comes into play.\u003c\/p\u003e\n\u003cp\u003eTo create perfect-fitting plugs, leave a nearly invisible line between the plug and the workpiece. Put a bit of glue in the hole, tap in a plug (with grain lined up) until you meet resistance, then trim any remaining projection once the glue dries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSharpening\u003c\/strong\u003e\u003cbr\u003eSnug-Plug Cutters come ready for use but should be honed occasionally for optimum cutting. Using a thin flat file, a sharpening stone, or 320 grit sandpaper glued to hardboard, hone the face of each tooth, maintaining the factory rake angle.\u003c\/p\u003e\n\u003cp\u003eAfter prolonged use, if the tips dull, file the top bevel at the original angle. Keep the tooth height even.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFirst 1\/8\" of plug is stated size (1\/4\", 5\/16\", etc.), then flares out at 3° included angle\u003c\/li\u003e\n\u003cli\u003eCutters carefully reamed after hardening to ensure perfect concentricity\u003c\/li\u003e\n\u003cli\u003eRe-sharpening instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eRound shank:\u003c\/strong\u003e 3\/8\"\u003cbr\u003e\u003cstrong\u003eRecommended Softwood Running Speed:\u003c\/strong\u003e 600 RPM max.\u003cbr\u003e\u003cstrong\u003eRecommended Hardwood Running Speed:\u003c\/strong\u003e 350 RPM max.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Veritas","offers":[{"title":"1\/4\"","offer_id":2811237828,"sku":"05J0501","price":19.9,"currency_code":"USD","in_stock":false},{"title":"1\/2\"","offer_id":21863527121014,"sku":"05J0504","price":21.9,"currency_code":"USD","in_stock":true},{"title":"7\/16\"","offer_id":21863527153782,"sku":"05J0506","price":21.5,"currency_code":"USD","in_stock":true},{"title":"3\/8\"","offer_id":21863527186550,"sku":"05J0502","price":20.9,"currency_code":"USD","in_stock":false},{"title":"5\/16\"","offer_id":21863527219318,"sku":"05J0505","price":20.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/05J0501-1.jpg?v=1670258437"},{"product_id":"bit-holder-bh-60-ce-imp","title":"Festool Bit Holder BH 60 CE-Imp","description":"\u003cp\u003eFor Festool Cordless Drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck).\u003c\/p\u003e\n\u003cp\u003eThis 2-3\/8\" magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit.\u003c\/p\u003e\n\u003cp\u003eThe weight of the drill is reduced by nearly half a pound, and the length is reduced by nearly 1-1\/2” with the Centrotec System. Most importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system. Thicker and stronger sidewall for longer life and use with impact or standard bits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot suitable for the TID 18.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdapts all standard bits to the quick change capability of the Centrotec System\u003c\/li\u003e\n\u003cli\u003eMagnetic insert holds your bits securely in place to prevent loss\u003c\/li\u003e\n\u003cli\u003eLong, precision milled hex shank eliminates wobble, or run out during use\u003c\/li\u003e\n\u003cli\u003eThicker and stronger sidewall for longer life and use with impact or standard bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 2-3\/8\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":602183401481,"sku":"498974","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/498974-1.jpg?v=1754021702"},{"product_id":"festool-fastfix-eccentric-chuck","title":"Festool FastFix Eccentric Chuck EX-UNI","description":"\u003cp\u003eFor all \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" title=\"All Festool Drills\" target=\"_blank\"\u003eFestool C and T Cordless Drills\u003c\/a\u003e with FastFix fixture (except CXS\/TXS).\u003c\/p\u003e\n\u003cp\u003eThe Eccentric Chuck attachment connects directly to the output shaft of compatible Festool Drills for drilling and driving near adjacent surfaces. Switch between drill functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single purpose tools. The Festool FastFix Offset Chuck places bits flush to side, enabling close-quarters drilling and driving so you can place holes and fasteners near-perfectly adjacent to walls and into corners - significantly faster and easier than the alternative of driving screws in tight spaces manually.\u003c\/p\u003e\n\u003cp\u003eChuck rotates 360° without the need to remove it from the drill. Quick-release collar will not mar adjoining surfaces. Switch between drill functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single use tools. Getting the job done right the first time eliminates waste of material and fasteners and saves valuable time.\u003c\/p\u003e\n\u003cp\u003eWorks with all existing and previous model Festool drills equipped with FastFix interface for toolless change of chucks.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe adapter no longer needs to be disconnected from the machine\u003c\/li\u003e\n\u003cli\u003eFor drilling and screwdriving close to edges\u003c\/li\u003e\n\u003cli\u003eSignificantly faster and easier than the alternative of driving screws in tight spaces manually\u003c\/li\u003e\n\u003cli\u003eGetting it right the first time eliminates waste of material and fasteners and saves valuable time\u003c\/li\u003e\n\u003cli\u003eSwitch between drill functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single use tools\u003c\/li\u003e\n\u003cli\u003eEnables close-quarters drilling and driving, allowing you to get holes and fasteners near-perfectly adjacent to walls and into corners\u003c\/li\u003e\n\u003cli\u003eQuick angle adjustment simply by rotating the green ring without removing from the drill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003cul class=\"triangle__container\"\u003e\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":1451744296969,"sku":"205223","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/205223-1.jpg?v=1754021701"},{"product_id":"festool-depth-stop-chuck-dd-dc","title":"Festool Depth Stop Chuck DD-DC","description":"\u003cp\u003e\u003cspan\u003eFor TPC 18\/4 and all Festool C and T cordless drills with FastFix fixture (except CXS\/TXS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSwitch between drilling and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix Depth Stop Chuck is designed for consistent, precise depth setting regardless of material density. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe integrated clutch maintains depth of fastener placement independent of torque setting. Green quick-out ring backs out screws without affecting depth setting. Great for jobs where you want to make sure the screws are perfectly flush every time, including dry wall, decks, and cabinets. Getting it right the first time eliminates waste of material and fasteners and saves valuable time. Works with all existing and previous model Festool Drills equipped with FastFix interface for toolless change of chucks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSave time - set it once and forget it, without the need to constantly adjust torque settings on drill\u003c\/li\u003e\n\u003cli\u003eExpand the versatility of your Festool drill with FastFix interface\u003c\/li\u003e\n\u003cli\u003eLighter, more compact, and more flexible than a dedicated drywall gun\u003c\/li\u003e\n\u003cli\u003eGetting it right the first time eliminates waste of material and fasteners and saves valuable time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":31932219326582,"sku":"493539","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/493539-1.jpg?v=1754021569"},{"product_id":"centrotc-chuck","title":"Festool Centrotec Chuck WH-CE CENTROTEC","description":"\u003cp\u003eFor all \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" title=\"All Festool Drills\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eFestool Cordless Drills\u003c\/a\u003e with CENTROTEC interface.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSwitch between drill and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix based Centrotec Chuck is extremely light weight and compact. This quick-release chuck provides two points of contact for Centrotec bits, allowing them to extend directly into the drill spindle so they serves as an extension of the motor, significantly improving controllability and torque.\u003c\/p\u003e\n\u003cp\u003eReduce fatigue with the light weight Centrotec chuck and decrease necessary drilling\/driving clearance with the compact design. Save time changing between drill and screw bits with the quick-change Centrotec System. Accessory Centrotec bits can be used both with the Centrotec chuck as well as non-Festool standard bit holders and chucks.\u003c\/p\u003e\n\u003cp\u003eWorks with all existing and previous model Festool Drills equipped with FastFix interface for toolless change of chucks: T+3, C12, TDK, TDD, CDD models.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSave time changing between drill and screw bits with the quick-change Centrotec System\u003c\/li\u003e\n\u003cli\u003eReduce fatigue with the light weight Centrotec chuck and decrease drilling\/driving clearance with the compact design\u003c\/li\u003e\n\u003cli\u003eCentrotec bits extend directly into the drill spindle so they serves as an extension of the motor, significantly improving controllability and torque\u003c\/li\u003e\n\u003cli\u003eGetting the job done right the first time eliminates waste of material and fasteners and saves valuable time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":31998005084278,"sku":"492135","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/492135.jpg?v=1754021564"},{"product_id":"festool-hand-driver","title":"Festool Hand Driver SD-CE-DRIVE-UNI","description":"\u003cp\u003eThe Hand Driver expands the versatility of the entire Centrotec range, providing a simple solution for all hand driving tasks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Festool Centrotec bits and select accessories\u003c\/li\u003e\n\u003cli\u003eProvides quick change bit system for hand driving\u003c\/li\u003e\n\u003cli\u003eInterface for 1\/4\" bits and CENTROTEC tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":40500631797959,"sku":"200140","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/200140-1.jpg?v=1754021512"},{"product_id":"festool-adaptor-ad-3-8-ff","title":"Festool Drill Adaptor AD-3\/8\" FF","description":"\u003cp\u003eFor all \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Drills\" rel=\"noopener noreferrer\"\u003eFestool Cordless Drills\u003c\/a\u003e with CENTROTEC interface.\u003c\/p\u003e\n\u003cp\u003eFastFix Adapter for use with Festool PDC, C, and T drills. Equipped with 3\/8\" socket post.\u003c\/p\u003e\n\u003cp\u003eFor holding socket with 3\/8\" square.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43453053763801,"sku":"769064","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/769064-1.jpg?v=1754021441"},{"product_id":"festool-depth-stop-dc-uni-ff-chuck","title":"Festool Depth Stop DC UNI FF Chuck","description":"\u003cp\u003eFor all Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Hand Held Drills\" rel=\"noopener noreferrer\"\u003eCordless Drills with CENTROTEC interface\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDrive screws to a consistent depth using Socket Wrench or any 1\/4\" hex drive tip. Equipped with replaceable Guard Rings. PH2 bit included.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWith exchangeable stop sleeves\u003c\/li\u003e\n\u003cli\u003eIdeal for facade and patio screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eStop sleeves dia.:\u003c\/strong\u003e 5\/8\" + 3\/4\" (17 mm + 23 mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePH 2 bit\u003c\/li\u003e\n\u003cli\u003eSocket wrench, size 8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43744037077209,"sku":"769126","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/769126-1.jpg?v=1754021245"},{"product_id":"festool-adapter-3-8-70-ce-kg-centrotec","title":"Festool Adapter 3\/8\"-70 CE\/KG CENTROTEC","description":"\u003cp\u003eFor Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" title=\"All Festool Drills\" target=\"_blank\"\u003eCordless Drills with CENTROTEC interface\u003c\/a\u003e (for use in the WH-CE CENTROTEC tool chuck).\u003c\/p\u003e\n\u003cp\u003eThis Centrotec compatible socket adapter accepts all 3\/8\" sockets extending the capabilities of your Festool cordless drill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e2-3\/4\" (70 mm)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Festool Centrotec cordless drills\u003c\/li\u003e\n\u003cli\u003eAccepts standard 3\/8\" sockets\u003c\/li\u003e\n\u003cli\u003eBall lock for positive connection\u003c\/li\u003e\n\u003cli\u003eFor plug-in bits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43744218448089,"sku":"495133","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/495133-1.jpg?v=1754021244"},{"product_id":"festool-fast-fix-keyless-chuck","title":"Festool Fast Fix Keyless Chuck KC 13-1\/2-K-FFP","description":"\u003cp\u003eFor all F\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\" target=\"_blank\" title=\"All Drills\" rel=\"noopener noreferrer\"\u003eestool Cordless Drills\u003c\/a\u003e with CENTROTEC Interface.\u003c\/p\u003e\n\u003cp\u003eStandard replacement chuck for the PDC Drill. Compatible with C and T Drills. Up to 1\/2\" capacity. Ratcheting sleeve for increased retention.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImpact-resistant design for use with masonry drills\u003c\/li\u003e\n\u003cli\u003eWith locking device – prevents the unwanted release of the tool\u003c\/li\u003e\n\u003cli\u003eGripping surface made from plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping range: \u003c\/strong\u003e1\/16\" (1.5 mm) - 1\/2\" (13 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43840081395929,"sku":"769067","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/769067-1_153cc290-fc50-4229-91e3-585f9a92badf.jpg?v=1754021211"},{"product_id":"festool-angle-attachment-an-uni","title":"Festool Angle Attachment AN-UNI","description":"\u003cp\u003eFor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" title=\"All Festool Drills\" target=\"_blank\"\u003eFestool Drill\u003c\/a\u003e models TPC 18\/4, TDC 18\/4, C18, T18 and CXS\/TXS 18 with FastFix support.\u003c\/p\u003e\n\u003cp\u003eThe Right Angle attachment connects directly to the output shaft of compatible Festool drills for right angle drilling and driving.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuick angle adjustment simply by rotating the green ring without removing from the drill\u003c\/li\u003e\n\u003cli\u003eFor angular drilling and screwdriving in narrow places\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43865445564633,"sku":"205222","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/205222-1_9f0c33d7-526e-4856-90de-bd87fbca6884.jpg?v=1754021187"},{"product_id":"festool-keyless-chuck-kc-13-1-2-mmfp","title":"Festool Keyless Chuck KC 13-1\/2-MMFP","description":"\u003cp\u003eFor all \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Drills\" rel=\"noopener noreferrer\"\u003eFestool Cordless Drills\u003c\/a\u003e with CENTROTEC interface.\u003c\/p\u003e\n\u003cp\u003eStandard replacement chuck. Up to 1\/2\" capacity. Ratcheting sleeve for increased retention.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImpact-resistant design for use with masonry drills\u003c\/li\u003e\n\u003cli\u003eWith locking device – prevents the unwanted release of the tool\u003c\/li\u003e\n\u003cli\u003eGripping surface made from metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping range:\u003c\/strong\u003e 1\/16\" - 1\/2\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43865510478041,"sku":"577072","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/577072-1.jpg?v=1754021186"},{"product_id":"festool-drilling-dust-nozzle-d-27-bsd","title":"Festool Drilling Dust Nozzle D 27-BSD","description":"\u003cp\u003eFor Festool Drill models BHC 18 and PDC 18, and mobile CT Dust Extractors.\u003c\/p\u003e\n\u003cp\u003eFor drilling in floors, walls and ceilings up to a maximum of 1\/2\" to reduce dust or debris. Patented dual-chamber system for clean drilling and a secure hold. Foam rubber pad for a secure hold on uneven surfaces. Flexible joint piece for moving hose to perfect position. Drill sleeve made from nickel-plated steel. Compatible with all standard industrial and domestic vacuum cleaners.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdapter with flexible insert\u003c\/li\u003e\n\u003cli\u003eDrill sleeve made from nickel-plated steel\u003c\/li\u003e\n\u003cli\u003eCompatible with all standard industrial and domestic vacuum cleaners\u003c\/li\u003e\n\u003cli\u003eException: must be deactivated on extractors with automatic filter cleaning system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDrill bit dia.:\u003c\/strong\u003e 1\/2\" (12 mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\" - 1-1\/4\" (27-36 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43865533776089,"sku":"500483","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/500483-1.jpg?v=1754021186"},{"product_id":"festool-keyless-chuck-bf-fx-10","title":"Festool Keyless Chuck BF-FX 10","description":"\u003cp\u003eFor the Festool \u003ca title=\"All Festool Drills\" href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\"\u003eCXS\/TXS and CXS\/TXS 18 Cordless Drills\u003c\/a\u003e with FastFix interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClamping range:\u003c\/strong\u003e 1\/32\" (1 mm) - 3\/8\" (10 mm)\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43893855420633,"sku":"499949","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/499949-1.jpg?v=1754021145"},{"product_id":"festool-drill-angle-attachment-xs-as","title":"Festool Drill Angle Attachment XS-AS","description":"\u003cp\u003e\u003cspan\u003eFor Festool \u003c\/span\u003e\u003ca title=\"All Festool Drills\" href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\"\u003eCXS\/TXS Cordless Drills\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSwitch between drill functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single purpose tools. The Right Angle Chuck is the ultimate solution for close quarters hole or fastener placement. Drill or drive between studs, joists, cabinet or drawer spaces, or virtually any constrained space without switching over to a separate, dedicated tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" hex drive with wire detent\u003c\/li\u003e\n\u003cli\u003eAccepts Festool Centrotec or keyless chuck\u003c\/li\u003e\n\u003cli\u003eChuck rotates 360° with 16 presets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot compatible with CXS\/TXS 18 Drills.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43893890842841,"sku":"497951","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/497951-1.jpg?v=1754021144"},{"product_id":"festool-bit-holder-bv-150-ce","title":"Festool Bit Holder BV 150 CE","description":"\u003cp\u003e\u003cspan\u003eFor Festool \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" title=\"All Festool Drills\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/collections\/drills-drivers-menu\/brand_festool\" target=\"_blank\"\u003eCordless Drills\u003c\/a\u003e\u003cspan\u003e with CENTROTEC interface (for use in the \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/centrotc-chuck\" title=\"Festool Centrotec Chuck WH-CE CENTROTEC product page\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/centrotc-chuck\" target=\"_blank\"\u003eWH-CE CENTROTEC Tool Chuck\u003c\/a\u003e\u003cspan\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6\" Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly 1\/2 pound, and the length is reduced by nearly 1-1\/2” with the Centrotec System. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMost importantly, the Centrotec system offers a quicker and more secure means of bit change than any other quick-change chuck system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e6\" extended length bit holder provides access to difficult to reach spots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdapts all standard bits to the quick change capability of the Centrotec System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMagnetic insert holds your bits securely in place to prevent loss\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLong, precision milled hex shank eliminates wobble, or run out during use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtra-long\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43896935448793,"sku":"492540","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/492540-1.jpg?v=1754021135"},{"product_id":"festool-bit-holder-bhs-60-ce","title":"Festool Bit Holder BHS 60 CE","description":"\u003cp\u003e\u003cspan\u003eFor Festool Cordless Drills\u003c\/span\u003e\u003cspan\u003e with CENTROTEC interface (for use in the \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/centrotc-chuck\" title=\"Festool Centrotec Chuck WH-CE CENTROTEC product page\" target=\"_blank\"\u003eWH-CE CENTROTEC Tool Chuck\u003c\/a\u003e\u003cspan\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLockable, magnetic CENTROTEC quick-change bit holder for supporting 25mm standard bits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e2-1\/3\" (60mm)\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43896940626137,"sku":"205097","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/205097-1.jpg?v=1754021134"},{"product_id":"festool-angle-attachment-an-xs","title":"Festool Angle Attachment AN-XS","description":"\u003cp\u003eFor Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/cxs-18-txs-18-drills-accessories\" target=\"_blank\" title=\"Festool CXS 18 \u0026amp; TXS 18 Drills\/Accessories\" rel=\"noopener noreferrer\"\u003eCXS 18 and TXS 18 Drills\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe right-angle adapter for the CXS 18 and TXS 18 Compact Drill-Drivers provides drilling and driving applications in tight spaces. The FastFix interface with direct bit holder also allows use of the WH-CE CENTROTEC tool chuck and the BF-FX 10 keyless chuck.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFastFix support with 1\/4\" bit holder for an overall compact length\u003c\/li\u003e\n\u003cli\u003eMaximum flexibility due to compatibility with the WH-CE CENTROTEC tool chuck and the BF-FX 10 keyless chuck\u003c\/li\u003e\n\u003cli\u003eSimple attaching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. screw size for softwood:\u003c\/strong\u003e 3\/8\" x 11-13\/16\" (10 x 300 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43995125842137,"sku":"205710","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/205710-1.jpg?v=1754021099"},{"product_id":"kreg-90-pocket-hole-driver","title":"Kreg 90° Pocket-Hole Driver","description":"\u003cp\u003eTurn any drill into a 90° driver with the Kreg 90° Pocket-Hole Driver. This compact drill attachment allows you to drive screws in places you couldn’t normally reach with your drill.\u003c\/p\u003e\n\u003cp\u003eThe included 3\" square-drive bit has a magnetic tip that locks into the head of a pocket-hole screw and won’t slip out – so you can drive screws with confidence, no matter where they are. This attachment works with all hex shank bits, making it great for more than just pocket-hole screws.\u003c\/p\u003e\n\u003cp\u003eWith an ergonomic design, the 90° Pocket-Hole Driver is easy to hold in place with one hand while you control the drill with the other. It’s also impact-rated for use with an impact driver. Whenever you need to drive screws in tight spaces, count on the 90° Pocket-Hole Driver to get the job done.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDrive screws in tight spaces with any hex shank bit\u003c\/li\u003e\n\u003cli\u003ePerfect for pocket-hole screws\u003c\/li\u003e\n\u003cli\u003eIncluded 3” square-drive magnetic-tip bit locks in, won’t fall out\u003c\/li\u003e\n\u003cli\u003eErgonomic, easy-grip design\u003c\/li\u003e\n\u003cli\u003eImpact rated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1\/4\" hex shank drill bits\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MdAGH6YU840\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":44002347122905,"sku":"KDRV-90DG","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/KDRV-90DG-1.jpg?v=1690307642"},{"product_id":"kreg-drilling-guide","title":"Kreg Drilling Guide","description":"\u003cp\u003eThe Kreg Drilling Guide makes it easy to create perfectly straight holes without using a drill press. You can get precisely positioned holes with just a hand drill. Featuring six hardened steel drill guides—from 1\/8\" to 1\/2\"—that do the work of holding your drill in position for you. The Guide features an ergonomic design and Kreg GripMaxx™ material that ensure it stays in place as you use it, so your drill bit won’t wander off your mark as you start the hole.\u003c\/p\u003e\n\u003cp\u003eThe Drilling Guide also automatically centers on the edge of 3\/4\"-wide and 1\/2\"-wide boards and plywood, so you can drill holes that are perpendicular to the edge and perfectly centered. Use the Drill Guide for all kinds of tasks – whether you need a hole for driving a screw, mounting hardware, helping create a dowel joint, and much more.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in hole alignment marks\u003c\/li\u003e\n\u003cli\u003eSix hardened steel drill guides: 1\/8\", 3\/16\", 1\/4\", 5\/16\", 3\/8\", 1\/2\"\u003c\/li\u003e\n\u003cli\u003eSelf-centers on edge of 1\/2\", 3\/4\" (13 mm and 19 mm) material\u003c\/li\u003e\n\u003cli\u003eGripMaxx™ anti-slip surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1\/8\", 3\/16\", 1\/4\", 5\/16\", 3\/8\", 1\/2\" drill bits\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/uCHifz6PZow\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":44003259744473,"sku":"KDG-6000","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/KDG-6000-1.jpg?v=1690385259"},{"product_id":"ecopoxy-epoxy-mixer","title":"EcoPoxy Epoxy Mixers","description":"\u003cp\u003eEcoPoxy Epoxy Mixers are a convenient, easy-to-use solution for mixing epoxy. Whether you are making a river table, serving tray, or encapsulation, mixing epoxy does not have to be a chore. From project to project, you can expect these epoxy mixers to provide efficient mixing, saving you the time and effort of mixing by hand.\u003c\/p\u003e\n\u003cp\u003eBoth have a rugged triple-blade design with a hexagonal steel shaft that keys into your drill. Simply lock it in place, then run your drill and let it do the work! The 80mm mixer is perfect for mixing epoxies in pour pails, like EcoPoxy's Mixing Pails, while the 45mm mixer is ideal for mixing cups. When you are done mixing, they can be cleaned and reused.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThorough mixing:\u003c\/strong\u003e Aggressive paddles designed to mix epoxies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent results:\u003c\/strong\u003e Complete mixing of Part A and Part B in every container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction:\u003c\/strong\u003e Hexagonal steel shaft and rugged design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess effort than hand mixing:\u003c\/strong\u003e Let your power drill do the work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"EcoPoxy","offers":[{"title":"45mm","offer_id":44103138312409,"sku":"EPMXR10-45X400","price":7.99,"currency_code":"USD","in_stock":true},{"title":"80mm","offer_id":44103138345177,"sku":"EPMXR10-80X400","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/bothMixersmain_1af5623a-b79d-4a6c-b2e5-29638702bf31.jpg?v=1763670158"},{"product_id":"festool-dust-extraction-adapter-av-bhc-khc","title":"Festool Dust Extraction Adapter AV-BHC\/KHC","description":"\u003cp\u003eLess dust when hammer drilling and chiseling. This dust extraction device fits all Festool Hammer Drills and Combo Hammers, is compatible with all CT Dust Extractors, and is adjustable to your drilling length. The clear sleeve gives you a clear view of the drill bit. If you don't have an extractor handy, the end cap acts as a dust collector - even when working overhead. Easy to use and attach with depth stop function, making the dust extraction nozzle the ideal companion for every job.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible: \u003c\/strong\u003eTwo clamping points for attaching to the depth stop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to attach:\u003c\/strong\u003e The dust extraction nozzle can be attached to the depth stop in seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical:\u003c\/strong\u003e Can be adjusted to the length of the drill bit and easily replaced or extended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear view: \u003c\/strong\u003eThe transparent and removable sleeve provides a clear view of the drill bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell thought out: \u003c\/strong\u003eThe abrasion-resistant material does not leave annoying marks on the surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDust extraction connection dia.:\u003c\/strong\u003e 1-1\/16\" \/ 1-7\/16\" (27 \/ 36 mm)\u003cbr\u003e\u003cstrong\u003eDrill bit dia.: \u003c\/strong\u003e0 - 1\" (0 - 26 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!----\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":45687656382681,"sku":"577524","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577524main.jpg?v=1754021021"},{"product_id":"festool-auxiliary-handle-ah-50-181-khc","title":"Festool Auxiliary Handle AH-50\/181 KHC","description":"\u003cp\u003eThe additional handle for the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-cordless-rotary-hammer-drill-khc-18-eb-basic\" target=\"_blank\" title=\"Festool Cordless Rotary Hammer Drill KHC 18 EB-Basic product page\" rel=\"noopener\"\u003eKHC 18 Cordless Rotary Hammer Drill\u003c\/a\u003e. It features a 50 mm collar suitable for handling all hammer drilling, drilling, driving, and chiseling.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":45694717591769,"sku":"577525","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577525AuxiliaryHandle.jpg?v=1754021020"},{"product_id":"festool-keyless-chuck-kc-13-khc","title":"Festool Keyless Chuck KC 13 KHC","description":"\u003cp\u003eReplacement keyless chuck for the \u003ca rel=\"noopener\" title=\"Festool Cordless Rotary Hammer Drill KHC 18 EB-Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-cordless-rotary-hammer-drill-khc-18-eb-basic\" target=\"_blank\"\u003eKHC 18 Cordless Rotary Hammer Drill\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe keyless chuck can be mounted on the drill without tools and locked or released by hand. With a clamping range of up to 1\/2\" (1.5 to 13 mm), a variety of bits can be clamped quickly and easily.\u003c\/p\u003e\n\u003cp\u003eWith locking design to help prevent accidental release of the bit.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLocking designs helps to prevent accidental release of the bit\u003c\/li\u003e\n\u003cli\u003eAll-metal knurled gripping surface\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInternal carbide jaws for optimal clamping force and long life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRotating protective ring for helping to prevent damage to the workpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eClamping range: \u003c\/strong\u003e1\/16\" - 1\/2\" (1.5 - 13 mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":45694725488857,"sku":"577526","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577526chuck.jpg?v=1754021019"},{"product_id":"festool-drill-chuck-c-sds-khc","title":"Festool Drill Chuck C SDS KHC","description":"\u003cp\u003eReplacement chuck for the \u003ca rel=\"noopener\" title=\"Festool Cordless Rotary Hammer Drill KHC 18 EB-Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-cordless-rotary-hammer-drill-khc-18-eb-basic\" target=\"_blank\"\u003eKHC 18 Cordless Rotary Hammer Drill\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe SDS-Plus Chuck attaches to the drill without tools. Bits are clamped securely and quickly with the SDS-Plus attachment.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuick-change chuck with fast and easy installation without the use of tools\u003c\/li\u003e\n\u003cli\u003eSDS-Plus holder for easy engagement of SDS-Plus insertion bits\u003c\/li\u003e\n\u003cli\u003eQuick and easy bit changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":45694748950745,"sku":"577527","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577527chuck.jpg?v=1754021018"},{"product_id":"cmt334-hinge-boring-head-for-45-9-5-hinges-with-tooling","title":"CMT334 Hinge Boring Head for BLUM 45\/9.5 Hinges (Includes Tooling)","description":"\u003cp\u003eThe innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point-to-point machines.\u003c\/p\u003e\n\u003cp\u003eFits the following line boring machines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/cantek-21-spindle-line-drill-pneumatic\" title=\"Cantek JB21P 21 Spindle Line Drill - Pneumatic product page\" rel=\"noopener\" target=\"_blank\"\u003eCantek JB21P\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/cantek-21-spindle-construction-boring-machine\" title=\"Cantek HS21T 21 Spindle Construction Boring Machine product page\" rel=\"noopener\" target=\"_blank\"\u003eCantek HS21T\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/minimax-ad-21-multi-boring-machine\" title=\"SCM Minimax AD 21 Multi-Boring Machine product page\" rel=\"noopener\" target=\"_blank\"\u003eMinimax AD 21\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/scm-startech-27-multi-boring-machine\" title=\"SCM Startech 27 Multi-Boring Machine product page\" rel=\"noopener\" target=\"_blank\"\u003eSCM Startech 27\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eNorthtech NT-CB1-21T\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHinge Boring Head\u003c\/li\u003e\n\u003cli\u003eRight-hand rotation boring bit (35 x 38.5mm)\u003c\/li\u003e\n\u003cli\u003eLeft-hand rotation dowel bit (8 x 38.5mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":46831148433625,"sku":"CMT334-4595-Tooling","price":334.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/CMT334-1_db2f581d-f179-4527-8275-44a686c60aff.jpg?v=1753203916"},{"product_id":"festool-mobile-drilling-attachment-mb-40","title":"Festool Mobile Drilling Attachment MB 40","description":"\u003cp\u003eFestool's MB 40 Drilling Attachment is the perfect companion when precision is required. Attached to your Festool Drill with FastFix, it enables right-angled, precise, and repeatable drilling, regardless of the location.\u003c\/p\u003e\n\u003cp\u003eThe MB 40 helps you drill perfectly at 90° for straight, accurate holes every time. Whether you're on the jobsite or in the shop, you simply set your depth, line up your holes, and drill clean through wood, metal, or plastic. Need to drill straight down, into end grain, or make a row of holes? No problem! You can attach dust collection directly to the base so that you can always see your mark.\u003c\/p\u003e\n\u003cp\u003eStanding drill presses take up space and aren't transportable. The MB 40 offers the same precision found on most drill presses with the luxury of taking it anywhere. While compact and easy to carry, it's also solid and stable, so you don't have to compromise durability for convenience; with the MB 40, you get both! It even allows you to drill precise holes for hinges, dowels, and more when used with Festool's \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-forstner-bit-set-sys3-s-76-fb-ce-sort-5\" title=\"Festool Forstner Bit Set SYS3 S 76-FB CE-SORT\/5 product page\" rel=\"noopener\" target=\"_blank\"\u003eForstner Bit Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe included FastFix attachment allows you to snap in Festool Cordless Drills and Hammer Drills without the need for tools.* The MB 40 also comes with a guide rail adapter which allows you to attach the MB 40 to a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" title=\"All Festool Guide Rails\" rel=\"noopener\" target=\"_blank\"\u003eFestool Guide Rail\u003c\/a\u003e and drill in a straight line, perfect for long rows of holes. Lastly, the parallel side fence makes edge drilling easy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note:\u003c\/strong\u003e Compatible with CXS\/TXS 12, CXS\/TXS 18, TPC 18\/4, TDC 18\/4, C 18, and T 18 Drills with FastFix holder. Not compatible with CXS 10.8V or TXS 10.8V Drills.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastFix attachment:\u003c\/strong\u003e Quick tool changes. Snap in Festool Cordless Drills and Hammer Drills without the need for tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth control:\u003c\/strong\u003e Set your depth. Drill up to 2\" (50mm) deep with clear depth markings in mm or inches. Perfect for cup hinges or series drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole series function:\u003c\/strong\u003e Ready for the 32mm system. Comes with 3mm and 5mm pins. Set it once, and the pin stays in place for the whole run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel side fence:\u003c\/strong\u003e Edge drilling made easy. Drill straight and parallel to edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStop for end-grain holes:\u003c\/strong\u003e Perfect for panel edges. Get clean, accurate holes right where you need them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuide rail adapter:\u003c\/strong\u003e Drill in a straight line. Guide rail adapter snaps on without tools — great for long rows of holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-loaded supports:\u003c\/strong\u003e Custom set up. Remove the spring for special jobs where you need more control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Mountable base. Bolt it to your workpiece or custom jig using the holes in the base plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScribe marks:\u003c\/strong\u003e Pinpoint accuracy. Helps with lineups, hinge drilling, and consistent hole spacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e Clean drilling. Hook up a CT Dust Extractor to keep the hole and your workspace clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. drilling diameter (Forstner bit):\u003c\/strong\u003e 1-9\/16\" (40mm)\u003cbr\u003e\u003cstrong\u003eMax. drilling diameter (auger bit):\u003c\/strong\u003e 5\/8\" (16mm)\u003cbr\u003e\u003cstrong\u003eBase dimensions:\u003c\/strong\u003e 4-3\/8\" x 4-1\/2\" (110 x 114mm)\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 12-1\/4\" (312mm)\u003cbr\u003e\u003cstrong\u003eSetting range of depth stop:\u003c\/strong\u003e 0 - 2\" (0 - 50mm)\u003cbr\u003e\u003cstrong\u003eMax. screw diameter (templates\/fixtures):\u003c\/strong\u003e 5\/32\" (4mm)\u003cbr\u003e\u003cstrong\u003eStroke w\/depth stop (with spring):\u003c\/strong\u003e 7-3\/8\" (187mm)\u003cbr\u003e\u003cstrong\u003eStroke w\/o depth stop (no spring):\u003c\/strong\u003e 8\" (203mm)\u003cbr\u003e\u003cstrong\u003eDust extraction connection diameter:\u003c\/strong\u003e 1-1\/16\" (27mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.1 lbs. (1.4 kg)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFastFix attachment\u003c\/li\u003e\n\u003cli\u003eFSA-MB 40 guide rail adapter\u003c\/li\u003e\n\u003cli\u003ePA-MB 40 parallel side fence (w\/stop for end face holes)\u003c\/li\u003e\n\u003cli\u003e5mm pin\u003c\/li\u003e\n\u003cli\u003e3mm pin\u003c\/li\u003e\n\u003cli\u003eTX 15 key\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/eudZ-GqXWuE?si=OXdY9cBrxDbIYA5K\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":46875879899353,"sku":"577971","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/577971-1.jpg?v=1754581600"},{"product_id":"lamello-invis-mx2-minimag-drill-attachment","title":"Lamello Invis Mx2 MiniMag Drill Attachment","description":"\u003cul\u003e\n\u003cli\u003eFor use with Lamello \u003ca rel=\"noopener\" title=\"All Invis Connectors\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-invis-connectors\" target=\"_blank\"\u003eInvis Mx2 Connectors\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttaches to any standard power drill\u003c\/li\u003e\n\u003cli\u003eRotates and magnetically drives Invis connectors together to create a strong, invisible, and detachable joint\u003c\/li\u003e\n\u003cli\u003eReverse the direction of the drill to disconnect the Invis connectors and detach the workpiece\u003c\/li\u003e\n\u003cli\u003e~550 lbs. of clamping force per connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Minimag attaches to any standard drill with 1,200 - 1,500 RPM. The rotating magnetic field of the MiniMag\/actuator drives the two pieces together just as one cogwheel drives the other. The screw within the male joining element threads itself into the inside thread of the female stud, which is driven by the contact-free magnetic field to ensure a tight connection. Invis joints have a clamping force of up to 550 lbs.\u003c\/p\u003e\n\u003cp\u003eIncludes screw bit.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/UaJ31r_MFxs?si=ycBl0JEKqonJvnh8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":47273287811289,"sku":"6100301","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/MiniMagforInvis.jpg?v=1756995193"},{"product_id":"mafell-drilling-station-bst-650-s","title":"Mafell Drilling Station BST 650 S","description":"\u003cp\u003eMafell's Drilling Station revolutionizes drill jigs with its iris-like roller guide system that completely prevents deflection. Its lightweight but rigid single-column design offers unprecedented accuracy thanks to its stability and unobstructed visibility when drilling. Compatible with any standard drill with a 43mm collar.\u003c\/p\u003e\n\u003cp\u003eInstead of a traditional chuck, the BST 650 S uses six vertically-located iris-like rollers. These wheels perfectly center and squeeze the drill bit from all sides, preventing any backlash or bit drift for flawless holes. The system also has an adjustable polyethylene cable that automatically returns the drill to its starting position. This saves time and reduces operator fatigue, especially when drilling horizontally or making repetitive holes.\u003c\/p\u003e\n\u003cp\u003eThe BST 650 S can be precisely set to +\/- 45° in either direction. The drill tip always remains at base-plate level as the pivot axis, guaranteeing accuracy even when drilling angled holes. Built on a single-rail design, the BST 650 S has a completely unobstructed view of the drill tip and the layout mark, making your drilling applications that much more precise. This also leaves ample space to easily change drill bits.\u003c\/p\u003e\n\u003cp\u003eDrilling series of holes? Add the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/mafell-copying-insert-for-bst-drilling-stations\" target=\"_blank\" title=\"Mafell Copying Insert for BST Drilling Stations product page\" rel=\"noopener\"\u003eCopying Insert\u003c\/a\u003e \u0026amp; \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/mafell-special-drill-bit-for-copying-insert\" target=\"_blank\" title=\"Mafell Special Drill Bit for Copying Insert product page\" rel=\"noopener\"\u003eSpecial Drill Bit\u003c\/a\u003e to optimize your workflow!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIris-like rollers perfectly secure the drill bit, preventing any backlash or drift\u003c\/li\u003e\n\u003cli\u003eSingle-column design is robust and provides an unobstructed view of the drill tip\u003c\/li\u003e\n\u003cli\u003eAdjustable bearing guide system allows you to use imperial or metric bits\u003c\/li\u003e\n\u003cli\u003eCan be set to +\/- 45° in either direction\u003c\/li\u003e\n\u003cli\u003eTensioning cable automatically retracts machine back to the starting position\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually any standard drill with a 43mm collar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. drill bit length:\u003c\/strong\u003e 25-9\/16\"\u003cbr\u003e\u003cstrong\u003eDrill bit diameter range:\u003c\/strong\u003e 5\/16\" to 1-1\/8\"\u003cbr\u003e\u003cstrong\u003eDrill collar diameter:\u003c\/strong\u003e 1-11\/16\"\u003cbr\u003e\u003cstrong\u003eTilt range:\u003c\/strong\u003e -45° to 45°\u003cbr\u003e\u003cstrong\u003eWeight (without drill):\u003c\/strong\u003e 13.3 lbs.\u003cbr\u003e\u003cstrong\u003eHeight (without drill):\u003c\/strong\u003e 32-3\/4\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":47727148466393,"sku":"961216","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/BST-1.jpg?v=1779378691"},{"product_id":"mafell-copying-insert-for-bst-drilling-stations","title":"Mafell Copying Insert for BST Drilling Stations","description":"\u003cp\u003eCopying insert for Mafell BST Drilling Stations. It replaces the insert plate at the base of the station, making it easier to drill series of holes. Ideal for working with drilling templates. With a center diameter of 18mm, up to 11\/16\" drill bits can pass through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Requires \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/mafell-special-drill-bit-for-copying-insert\" target=\"_blank\" title=\"Mafell Special Drill Bit for Copying Insert product page\" rel=\"noopener\"\u003eSpecial Drill Bit for Copying Insert\u003c\/a\u003e to initially create wood templates (bit has 25mm diameter, so the Copying Insert's bottom 24.8mm diameter fits perfectly).\u003c\/p\u003e","brand":"Mafell","offers":[{"title":"Default Title","offer_id":47727148531929,"sku":"204290","price":81.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/204290-1.jpg?v=1779379408"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/drill-accessories-menu\/type_drilling-stations.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}