{"title":"All Clamps \u0026 Vises","description":"","products":[{"product_id":"kreg-90-right-angle-clamp","title":"Kreg 90° Right Angle Clamp","description":"\u003cp\u003eThe Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx auto-adjust technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1\/2\" plywood to thick 2x4 boards.\u003c\/p\u003e\n\u003cp\u003eThe steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.\u003c\/p\u003e\n\u003cp\u003eThe arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting. Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done. \u003c\/p\u003e\n\u003cp\u003eMany woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds pocket-hole joints at 90° during project assembly\u003c\/li\u003e\n\u003cli\u003eAutomaxx technology adjusts automatically to material thickness\u003c\/li\u003e\n\u003cli\u003eContoured grips for added comfort\u003c\/li\u003e\n\u003cli\u003ePin fits securely into pocket hole\u003c\/li\u003e\n\u003cli\u003eSwivel pad holds mating piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 3-1\/8\" (79 mm)\u003cbr\u003e\u003cstrong\u003eReach:\u003c\/strong\u003e 5\" (127 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with padded grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3UkUGZSIHJQ\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":1031323668,"sku":"KHCRA","price":46.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHCRA-1.jpg?v=1671132704"},{"product_id":"bessey-uniklamp","title":"Bessey UniKlamp Case Clamps","description":"\u003cp\u003eBessey UniKlamps feature gentle touch jaws that distribute clamping pressure along the entire length of the rail. This makes them ideal for sensitive workpieces and right angles.\u003c\/p\u003e\n\u003cp\u003eThese light duty universal case clamps are ideal for many jobs around the shop. For clamping or spreading, the lower clamping pressures spread over a wider surface are gentler on delicate work surfaces and, the light weight means less fatigue during glue-ups. Removable end clip for conversion to a spreader.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in Germany.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight duty universal clamping\/spreading:\u003c\/strong\u003e For bench top projects with a lighter frame and rail. Easy to handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGentle touch jaws:\u003c\/strong\u003e Distribute even clamping pressure. Made from impact and fracture resistant materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL contact surface, non-marring:\u003c\/strong\u003e Over 11 sq. inches of even clamping pressure. Non-marring, glue repellant surface also resists paint and grease solvents.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable end-clip:\u003c\/strong\u003e For conversion to a spreader.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic handle:\u003c\/strong\u003e Includes tried-and-true ergonomically shaped wooden handle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3-1\/8\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 330 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":44033284243673,"sku":"UK3.006","price":27.2,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":1071328360,"sku":"UK3.012","price":29.27,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":44033284276441,"sku":"UK3.024","price":26.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/uniklampmain_25cd9e84-6ace-4abf-af55-2f508b3c943a.jpg?v=1744635628"},{"product_id":"kreg-automaxx-face-clamp","title":"Kreg AUTOMAXX Face Clamp 3\"","description":"\u003cp\u003eWood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. These versatile wood clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces.\u003c\/p\u003e\n\u003cp\u003eThanks to Automaxx Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2 x 4 and then a piece of 1\/2\" plywood without ever readjusting the wood clamp.\u003c\/p\u003e\n\u003cp\u003eEasily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the wood clamp maintains consistent clamping pressure with every thickness. \u003c\/p\u003e\n\u003cp\u003eWood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.\u003c\/p\u003e\n\u003cp\u003eAlso available as a \u003ca title='Kreg AUTOMAXX Face Clamp 6\" product page' href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-automaxx-face-clamp-6\" target=\"_blank\"\u003e6\" Clamp\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAdjusts automatically to match material thickness\u003c\/li\u003e\n\u003cli\u003eEasy-to-regulate pressure with a simple thumbscrew\u003c\/li\u003e\n\u003cli\u003eLarge clamp faces spread pressure evenly\u003c\/li\u003e\n\u003cli\u003eErgonomic padded grips prevent hand fatigue\u003c\/li\u003e\n\u003cli\u003eWorks with the \u003ca title=\"Kreg Jig R3 product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/kreg-jig-r3\" target=\"_blank\"\u003eKreg Pocket-Hole Jig R3\u003c\/a\u003e Clamp Pad Adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e Up to 3\" (76 mm)\u003cbr\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e Steel with Molded Grips\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5WtWvQKBqXA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":21870291517558,"sku":"KHC3","price":36.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/KHC3-1.jpg?v=1675887664"},{"product_id":"wilton-4-x-10-woodworking-vice","title":"Wilton 4\" x 10\" Pivot Jaw Woodworkers Vise - Rapid Acting","description":"\u003cp\u003eThe same reliable work holding you’ve counted on for over 80 years, now designed to hold any of your wood projects. Wilton’s Pivot Jaw Woodworkers Vise is the choice for any of your woodworking needs. Perfect for beginners and professional craftsmen alike, this bench vise’s heavy-duty cast iron construction is the perfect addition to any wood shop and is designed to withstand every wood project you throw at it.\u003c\/p\u003e\n\u003cp\u003eThis vice is loaded with features that woodworkers will love. The self-centering jaw ensures a strong hold on all workpieces no matter the shape. The front jaw pivots 12° to allow for irregularly shaped parts. Plus, the pivot jaw can be removed for wider clamping requirements. Includes magnetic maple jaw inserts to prevent damage to your workpieces.\u003c\/p\u003e\n\u003cp\u003eWilton warrants every product they sell against manufacturers’ defects. All Wilton Branded products carry a Lifetime Warranty. Warranties are subject to Wilton's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/wilton-4-x-7-woodworking-vice\" title='Wilton 4\" x 7\" Pivot Jaw Woodworkers Vise product page' rel=\"noopener\" target=\"_blank\"\u003e4\" x 7\" vise\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePivoting jaw is removable to provide more capacity\u003c\/li\u003e\n\u003cli\u003eIncludes magnetic maple jaw inserts to prevent damage to your workpieces\u003c\/li\u003e\n\u003cli\u003eRapid-release action expedites removal of the work piece from the vise jaws\u003c\/li\u003e\n\u003cli\u003eSelf-centering jaw ensures strong hold on all workpieces\u003c\/li\u003e\n\u003cli\u003eFront jaw moves vertically 9\/16\" to act as a full-width dog\u003c\/li\u003e\n\u003cli\u003eFront jaw pivots 12° to accommodate irregular pieces\u003c\/li\u003e\n\u003cli\u003eCovered by Wilton’s Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 4\" x 10\"\u003cbr\u003e\u003cstrong\u003eJaw height:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eJaw depth:\u003c\/strong\u003e 1-5\/16\"\u003cbr\u003e\u003cstrong\u003eJaw opening:\u003c\/strong\u003e 13\"\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 36 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Wilton","offers":[{"title":"Default Title","offer_id":1326717588,"sku":"WL9-63218","price":391.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/63218-1.jpg?v=1709836483"},{"product_id":"wilton-4-x-7-woodworking-vice","title":"Wilton 4\" x 7\" Pivot Jaw Woodworkers Vise - Rapid Acting","description":"\u003cp\u003eThe same reliable work holding you’ve counted on for over 80 years, now designed to hold any of your wood projects. Wilton’s Pivot Jaw Woodworkers Vise is the choice for any of your woodworking needs. Perfect for beginners and professional craftsmen alike, this bench vise’s heavy-duty cast iron construction is the perfect addition to any wood shop and is designed to withstand every wood project you throw at it.\u003c\/p\u003e\n\u003cp\u003eThis vice is loaded with features that woodworkers will love. The self-centering jaw ensures a strong hold on all workpieces no matter the shape. The front jaw pivots 10° to allow for irregularly shaped parts. Plus, the pivot jaw can be removed for wider clamping requirements. Includes magnetic maple jaw inserts to prevent damage to your workpieces.\u003c\/p\u003e\n\u003cp\u003eWilton warrants every product they sell against manufacturers’ defects. All Wilton Branded products carry a Lifetime Warranty. Warranties are subject to Wilton's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eAlso available as a \u003ca rel=\"noopener\" title='Wilton 4\" x 10\" Pivot Jaw Woodworkers Vise product page' href=\"https:\/\/www.oaktreesupply.com\/products\/wilton-4-x-10-woodworking-vice\" target=\"_blank\"\u003e4\" x 10\" vise\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePivoting jaw is removable to provide more capacity\u003c\/li\u003e\n\u003cli\u003eIncludes magnetic maple jaw inserts to prevent damage to your workpieces\u003c\/li\u003e\n\u003cli\u003eRapid-release action expedites removal of the work piece from the vise jaws\u003c\/li\u003e\n\u003cli\u003eSelf-centering jaw ensures strong hold on all workpieces\u003c\/li\u003e\n\u003cli\u003eFront jaw moves vertically 9\/16\" to act as a full-width dog\u003c\/li\u003e\n\u003cli\u003eFront jaw pivots 10° to accommodate irregular pieces\u003c\/li\u003e\n\u003cli\u003eCovered by Wilton’s Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 4\" x 7\"\u003cbr\u003e\u003cstrong\u003eJaw height:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eJaw depth:\u003c\/strong\u003e 1-5\/16\"\u003cbr\u003e\u003cstrong\u003eJaw opening:\u003c\/strong\u003e 10\"\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 32 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Wilton","offers":[{"title":"Default Title","offer_id":1326718632,"sku":"WL9-63144","price":293.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/63144-1.jpg?v=1709834609"},{"product_id":"festool-clamping-elements-for-the-mft-2-pack","title":"Festool Clamping Elements for the MFT (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eThe ultimate complement to the Festool MFT system, the Festool Clamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application. Cam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape. The low profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT, freeing your work surface from obstruction. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for a perfect fit with the 20 mm holes of the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Tables\" rel=\"noopener noreferrer\"\u003eFestool MFT Multifunction Table\u003c\/a\u003e. Includes 2 Clamping Elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping Elements secure your workpiece for precision routing, sanding, cutting, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCam-action levers and rubber-padded clamp surfaces enable easy locking and quick release for a secure grip on your material, regardless of shape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow profile design provides secure lateral clamping force on the material edges utilizing the grid hole pattern of the MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for a perfect fit with the 20mm holes of the Festool MFT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor safe and precise securing of the workpiece (sawing, sanding, routing, drilling, etc.)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Clamping Elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046405,"sku":"488030","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/488030-1.jpg?v=1754021860"},{"product_id":"festool-screw-clamps-120-mm-2-pack","title":"Festool Screw Clamps - 120mm (2 Pack)","description":"\u003cp\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Includes 2 clamps.\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-300mm-2-pack\" title=\"Festool Screw Clamps - 300mm (2-pack) product page\" rel=\"noopener\" target=\"_blank\"\u003e11-13\/16\" (300 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 4-11\/16\" (120 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 4-11\/16\" (120mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114046597,"sku":"489570","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489570-1.jpg?v=1754021858"},{"product_id":"festool-screw-clamps-300mm-2-pack","title":"Festool Screw Clamps - 300mm (2 Pack)","description":"\u003cp\u003e\u003cspan\u003eDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned to work seamlessly with holes and channels on the Festool \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" title=\"All Festool MFT tables\" target=\"_blank\"\u003eMFT Multifunction Table\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e and can be inserted into bottom t-slot of Festool \u003c\/span\u003e\u003ca title=\"Festool FS Guide Rails product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e\u003cspan\u003e for limitless positioning.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAlso available in size \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-screw-clamps-120-mm-2-pack\" target=\"_blank\" title=\"Festool Screw Clamps - 120mm (2-pack) product page\" rel=\"noopener\"\u003e4-11\/16\" (120 mm)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eClamping thickness 11-13\/16\" (300 mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTraditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSecure your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for all clamping applications across the Festool System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel version\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 11-13\/16\" (300mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cp\u003e(2) Screw Clamps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cdiv class=\"productheader\"\u003e\u003ciframe width=\"420\" height=\"270\" src=\"https:\/\/www.youtube.com\/embed\/T0p6hI8pXhM?rel=0\u0026amp;wmode=opaque\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"productheader\"\u003e[\/TABS]\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047237,"sku":"489571","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489571-1.jpg?v=1754021857"},{"product_id":"fs-rapid-clamp-w-fixed-jaw-fs","title":"Festool FS-Rapid Clamp FS-RAPID\/R","description":"\u003cp\u003eDesigned for rapid positioning and clamping on \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFestool FS Guide Rails\u003c\/a\u003e. The FS-Rapid Clamp is particularly useful for fast and reliable clamping and securing FS Guide Rails to sheet good materials. Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge.\u003c\/p\u003e\n\u003cp\u003eIncludes clamping jaws and fixed jaws.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for rapid positioning and clamping of Festool FS Guide Rails to all types of sheet good material\u003c\/li\u003e\n\u003cli\u003eMounts to guide rails using the continuous bottom t-slot for limitless adjustability\u003c\/li\u003e\n\u003cli\u003eOne-handed trigger action enables quick set up on material edge\u003c\/li\u003e\n\u003cli\u003eFor clamping and positioning guide rails FS, FS\/2, and GRP\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamping jaws\u003c\/li\u003e\n\u003cli\u003eFixed jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rUUR4Mu7kCc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047301,"sku":"489790","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/489790-3.jpg?v=1754021856"},{"product_id":"festool-quick-clamp-fs-hz-160","title":"Festool Quick Clamp FS-HZ 160","description":"\u003cp\u003eThe Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material.\u003c\/p\u003e\n\u003cp\u003eThese clamps are designed to work seamlessly with holes and channels on the \u003ca rel=\"noopener\" title=\"All Festool Tables \u0026amp; Components\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\"\u003eMFT\/3 Multi-Function Table\u003c\/a\u003e and can be inserted into the bottom t-slot of \u003ca rel=\"noopener\" title=\"All Festool Guide Rails\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_guide-rails\" target=\"_blank\"\u003eFS Guide Rails\u003c\/a\u003e for limitless positioning. Clamping thickness 6-1\/4\" (160mm). Includes 1 clamp.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecures your workpiece for precision cutting, sanding, routing, or just about any other application\u003c\/li\u003e\n\u003cli\u003eRatcheting mechanism enables easy locking and quick release for a a more efficient workflow\u003c\/li\u003e\n\u003cli\u003eWorks seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping width:\u003c\/strong\u003e 6-1\/4\" (160mm)\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/inLS-BDD8ls?rel=0\u0026amp;wmode=opaque\" height=\"270\" width=\"420\"\u003e\u003c\/iframe\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114047749,"sku":"491594","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/491594-3.jpg?v=1754021853"},{"product_id":"bessey-ezs-one-handed-clamps","title":"Bessey EZS One-Handed Clamps","description":"\u003cp\u003eThe EZS One-Handed Clamps by Bessey offers a revitalized approach to the one hand clamp market. These lightweight and comfortable clamps are capable of exerting up to 445 lbs. of spreading or clamping force. This ergonomically shaped clamp can be easily reconfigured from clamping to spreading without tools. \u003c\/p\u003e\n\u003cp\u003eEZS Clamps feature an intelligent release mechanism where the upper section can quickly convert from clamping to spreading without tools. While all other clamps measure throat depth to the center of the pad, EZ and EZS extend throat depth right to the outside edge of the pads – power spread across the entire pad.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIntelligent release mechanism allows upper section to quickly convert from clamping to spreading without tools\u003c\/li\u003e\n\u003cli\u003eErgonomic handle positioned behind the rail, enabling a powerful grip\u003c\/li\u003e\n\u003cli\u003eSoft pressure caps optimize material protection and secure clamping\u003c\/li\u003e\n\u003cli\u003eThroat depth to the very edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 445 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/VW0UU6DjVRs?si=UVBkI4uouNDPg6wB\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875939180662,"sku":"EZS15-8","price":21.2,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875939115126,"sku":"EZS30-8","price":22.31,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875939049590,"sku":"EZS45-8","price":32.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875939016822,"sku":"EZS60-8","price":25.83,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125342661,"sku":"EZS90-8","price":35.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/EZ21508.jpg?v=1613407863"},{"product_id":"bessey-clutch-style-f-clamps","title":"Bessey Clutch Style F-Clamps with 2K Handle","description":"\u003cp\u003eBessey Clutch Style Clamps are a popular, regular duty clamp that can be used for a wide range of projects. These clamps are easy to use and adjustable thanks to the 2 piece slip clutch design. This allows you to set the clamp at a certain width and it will stay in place, not matter what position the clamp is in. These easy-to-use clamps are suitable for \"close quarters\" clamping with the 2K comfort handle.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic 2K handle\u003c\/li\u003e\n\u003cli\u003ePowder coated, ductile cast iron jaws\u003c\/li\u003e\n\u003cli\u003eNickel plated, drawn serrated rail\u003c\/li\u003e\n\u003cli\u003eNon-marring pads on the top and bottom jaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 1,100 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/5nuOLjj7Oog?si=ELPFxzoznF_Rxu1R\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"6\"","offer_id":21875941310582,"sku":"GSCC3.506+2K","price":15.68,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":21875941245046,"sku":"GSCC3.512+2K","price":16.97,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":21875941179510,"sku":"GSCC3.518+2K","price":18.36,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":21875941081206,"sku":"GSCC3.524+2K","price":20.4,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":19125343173,"sku":"GSCC3.536+2K","price":22.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Fstyle-1.jpg?v=1734634610"},{"product_id":"bessey-auto-adjust-toggle-clamps-inline","title":"Bessey Auto-Adjust Toggle Clamps - Inline","description":"\u003cp\u003eBessey auto-adjust toggle clamps have a wide range of height and force in one clamp. These clamps will automatically adjust to the thickness of your work piece, while applying the same amount of pressure. The pressure the clamp exerts can be easily changed from 25 to 550 pounds by adjusting the thumb screw.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-Adjusts to variations in work piece width up to 0-16 mm (approx 5\/8 IN)\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure screw allows clamping force adjustment\u003c\/li\u003e\n\u003cli\u003eLarge ergonomic handle\u003c\/li\u003e\n\u003cli\u003eHigh quality construction\u003c\/li\u003e\n\u003cli\u003eBase construction is optimized for 1\/4 IN (M6) fasteners\u003c\/li\u003e\n\u003cli\u003ePlunger has an M8 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"3\/8\"","offer_id":44650841309401,"sku":"STC-IHH15","price":24.33,"currency_code":"USD","in_stock":false},{"title":"5\/8\"","offer_id":44650841342169,"sku":"STC-IHH25","price":24.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/stc-ihhmain.jpg?v=1708118009"},{"product_id":"bessey-auto-adjust-toggle-clamps-horizontal","title":"Bessey Auto-Adjust Toggle Clamps - Horizontal","description":"\u003cp\u003eBessey auto-adjust toggle clamps have a wide range of height and force in one clamp. These clamps will automatically adjust to the thickness of your work piece, while applying the same amount of pressure. The pressure the clamp exerts can be easily changed from 25 to 550 pounds by adjusting the thumb screw.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-Adjusts to variations in work piece height from 20-60 mm (approx 2 3\/8 IN)\u003c\/li\u003e\n\u003cli\u003eHolding capacity up to 700 lbs (nominal)\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure screw allows clamping force adjustment from 25-550 lbs\u003c\/li\u003e\n\u003cli\u003eLarge ergonomic handle\u003c\/li\u003e\n\u003cli\u003eHigh quality construction\u003c\/li\u003e\n\u003cli\u003eBase construction is optimized for 1\/4 IN (M6) fasteners\u003c\/li\u003e\n\u003cli\u003eSpindle has an M8 thread\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bessey","offers":[{"title":"0-2-3\/8\"","offer_id":19125344325,"sku":"STC-HH70","price":24.33,"currency_code":"USD","in_stock":false},{"title":"0-1-9\/16\"","offer_id":22319810412662,"sku":"STC-HH50","price":23.6,"currency_code":"USD","in_stock":false},{"title":"0-13\/16\"","offer_id":22319810445430,"sku":"STC-HH20","price":22.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/inlinehorizontal-1.jpg?v=1734640096"},{"product_id":"bessey-variable-angle-strap-clamp","title":"Bessey Variable Angle Strap Clamp","description":"\u003cp\u003eClamping large or odd shapes with straps is not new; however, most strap clamps exert force (pull) in only one direction, which can easily distort\/skew the work piece. Bessey's VAS-23 is different — it pulls equally on both ends of the strap, eliminating the chance of skewing your work piece. The high tensile woven polyester strap is extremely strong with a built-in take up reel that neatly stores the excess strap, eliminating a potential tripping hazard.\u003c\/p\u003e\n\u003cp\u003ePerfect for clamping square, rectangular, or irregular shapes. Comes with 4 pivoting Vario corner clips, which adjust to pressure.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap is drawn in on both sides:\u003c\/strong\u003e The strap draws simultaneously from both sides ensuring pressure is applied equally on all corners without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated coiling mechanism:\u003c\/strong\u003e Integrated rewind mechanism is operated with a crank handle which eliminates tangling and damage to the strap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical Vario corners:\u003c\/strong\u003e  Vario clip corners with twin-tilting pressure pads auto-adjust from 60° to 180° for easy assembly of most multi-angle projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtremely resistant:\u003c\/strong\u003e The special woven polyester band provides high resistance to tearing, and a clamping range of 23 ft. The steel wire loop opens quickly and simply to adjust or release glue-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBessey comfort handle:\u003c\/strong\u003e The 2K composite handle with comfort insert comes standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Up to 23 ft.\u003cbr\u003e\u003cstrong\u003eRange of angle:\u003c\/strong\u003e 60° - 180°\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.3 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/oedSg1EHd4M?si=3TDE5S8j5PzyNQqv\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":19125344389,"sku":"VAS-23+2K-CB","price":27.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Strap-Clamp.jpg?v=1643379579"},{"product_id":"bessey-face-frame-cabinet-clamp","title":"Bessey Face Frame Cabinet Clamp","description":"\u003cp\u003eProfessional quality installation is achieved at a fraction of the time compared to the use of more conventional clamps. The cabinetry clamp is designed to combine the multiple steps of face frame cabinet installation into one easy process. Face frame stiles can be tightened, aligned, pre-drilled, and fastened while the clamp is in place.\u003c\/p\u003e\n\u003cp\u003eThe clamp holds the individual cabinet edges together while also keeping the faces along the joint flush. An integrated pilot-hole drilling guide flips out of the way so you can drive screws to connect the cabinets without removing or repositioning the clamp.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty steel clamp with steel sliding T-bars and aluminum alignment plate provides exceptional strength\u003c\/li\u003e\n\u003cli\u003eIntegrated pilot hole simplifies drilling\u003c\/li\u003e\n\u003cli\u003eNon-marring felt pads included to protect and cushion points of contact\u003c\/li\u003e\n\u003cli\u003eAcme threaded screws for quick and controlled tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eThroat depth:\u003c\/strong\u003e 1-1\/4\"\u003cbr\u003e\u003cstrong\u003eClamping force:\u003c\/strong\u003e 300-600 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"Default","offer_id":31680113225,"sku":"BES8511","price":25.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/BES8511-1.jpg?v=1746017652"},{"product_id":"kapex-miter-saw-clamping-kit","title":"Festool Clamping Kit for KAPEX Miter Saws","description":"\u003cp\u003eUse the Clamping Kit to secure the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_miter-saws\" target=\"_blank\" title=\"All Festool Miter Saws\" rel=\"noopener\"\u003eKAPEX Sliding Compound Miter Saw\u003c\/a\u003e to the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_tables-components\" target=\"_blank\" title=\"All Festool Tables\" rel=\"noopener\"\u003eFestool MFT\/3 Table\u003c\/a\u003e. Hex bolts drop into the KAPEX deck base as captured nuts, and are easily secured beneath the MFT with the oversized knobs.\u003c\/p\u003e\n\u003cp\u003ePack of 2 clamping knobs with bolts.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEnables easy and secure clamping of your KAPEX miter saw to any Festool MFT table\u003c\/li\u003e\n\u003cli\u003eBolts are easily secured beneath the MFT with the oversized knobs\u003c\/li\u003e\n\u003cli\u003eFast, easy, and secure\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":12585189408886,"sku":"494693","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494693-1.jpg?v=1754021671"},{"product_id":"microjig-matchfit-dovetail-clamps-2-pack","title":"MicroJig MATCHFIT Dovetail Clamps (2 Pack)","description":"\u003cp\u003eUnleash your creativity with the MATCHFIT Dovetail Clamps. These clamps are engineered to fit a 3\/8\" deep groove made using a 1\/2\" diameter, 14° dovetail router bit and offer unparalleled clamping freedom. The innovative dovetail clamp arm design allows you to create your own track grooves, enabling you to clamp virtually anywhere. Whether you're building jigs, fixtures, sleds, or workbenches, the MATCHFIT Dovetail Clamps provide the clamping pressure you need exactly where you need it.\u003c\/p\u003e\n\u003cp\u003eThe rubberized, soft-grip handle offers superior traction and can fine-tune your pressure. This unique design keeps the clamp head arm contained within the dovetail groove, ensuring your workspace remains clear and functional. This feature is essential for building extension fences, custom work benches, and personalized track systems effortlessly.\u003c\/p\u003e\n\u003cp\u003eThese clamps are also available in a \u003ca rel=\"noopener noreferrer\" title=\"MicroJig Matchfit Dovetail Clamp Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/microjig-matchfit-dovetail-clamp-pro\" target=\"_blank\"\u003ePro Pack\u003c\/a\u003e that includes a 1\/2\" shank dovetail router bit, a setup gauge, and dovetail variety hardware.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003e\n\u003cstrong\u003e\u003c\/strong\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBreakthrough dovetail clamp arm design gives you the freedom to create your own track grooves allowing you to clamp virtually anywhere\u003c\/li\u003e\n\u003cli\u003eUniversally compatible only with 1\/2\" 14° Dovetail Router Bits\u003c\/li\u003e\n\u003cli\u003eBuild tall, stable fences and infeed tables for your table saw\u003c\/li\u003e\n\u003cli\u003eNew look and better grip—now includes soft-grip handle\u003c\/li\u003e\n\u003cli\u003eCreate a versatile straight edge sleds for your table saw\u003c\/li\u003e\n\u003cli\u003eMake the 2-in-1 Straight Edge Guide to square ends of boards quickly and easily\u003c\/li\u003e\n\u003cli\u003eUse on your workbench as wide capacity vice clamps\u003c\/li\u003e\n\u003cli\u003eKeep clean with alcohol denatured\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.6 lbs.\u003cbr\u003e\u003cstrong\u003eClamping Pressure:\u003c\/strong\u003e 595 lbs.\u003cbr\u003e\u003cstrong\u003eClamping Range:\u003c\/strong\u003e 5-3\/8\"\u003cbr\u003e\u003cstrong\u003eRequirements:\u003c\/strong\u003e Requirements: Any standard 14°-1\/2\" Dovetail Router Bit\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Dovetail Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OIvSOWjo3yA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":22509088276598,"sku":"DVC-538K2","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/DVC-538K2-1.jpg?v=1739890130"},{"product_id":"microjig-matchfit-dovetail-clamp-pro","title":"MicroJig Matchfit Dovetail Clamp Pro","description":"\u003cp\u003eThe MATCHFIT Dovetail Clamp Pro includes everything you need to create your own tracks on virtually any surface: (2) MATCHFIT Dovetail Clamps, a MATCHFIT 1\/2\" x 14° Dovetail Router Bit, a Setup Gauge, and Dovetail Hardware Variety Pack.\u003c\/p\u003e\n\u003cp\u003eMATCHFIT Dovetail Clamps are engineered to fit a 3\/8\" deep groove made with the included Dovetail Router Bit. The innovative dovetail clamp arm design allows you to create your own track grooves, enabling you to clamp virtually anywhere. The unique design of the soft-grip handle keeps the clamp head arm contained within the dovetail groove, ensuring your workspace remains clear and functional.\u003c\/p\u003e\n\u003cp\u003eWith MATCHFIT, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.\u003c\/p\u003e\n\u003cp\u003eMaking the 3\/8\" groove is effortless thanks to the included Setup Gauge. It features a convenient router bit template that lets you set the exact depth for dovetail clamp grooves. This versatile gauge also serves as a template to set up a MicroJig Dado Stop (sold separately) for a fast, precise dado cut — no dado blade required!\u003c\/p\u003e\n\u003cp\u003eAlso compatible with Festool \u003ca rel=\"noopener noreferrer\" title=\"All Festool Tables\" href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\"\u003eMultifunction Tables\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecures material anywhere you can route a groove, without getting in the way.\u003c\/li\u003e\n\u003cli\u003eQuickly dials in dovetail router bit’s cutting depth with the Setup Gauge\u003c\/li\u003e\n\u003cli\u003eRoutes dovetail grooves on a jig or work surface\u003c\/li\u003e\n\u003cli\u003eMakes stops and hold-downs that move freely and tighten down anywhere you can route a groove.\u003c\/li\u003e\n\u003cli\u003eSecures material for cutting or assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.2 lbs.\u003cbr\u003e\u003cstrong\u003eClamping Pressure:\u003c\/strong\u003e 595 lbs.\u003cbr\u003e\u003cstrong\u003eRequirements:\u003c\/strong\u003e Any standard 14°-1\/2\" Dovetail Router Bit\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(2) Dovetail Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDovetail Router Bit (1\/2\" Shank)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSetup Gauge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDovetail Hardware Variety (6-Pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AJ2PktnJs6s\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":29398087467126,"sku":"DVC-1177K2","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/DVC-1177K2.jpg?v=1612988835"},{"product_id":"jlt-8-panel-clamp-with-18-3-1-2-high-jaw-40-long-clamps","title":"JLT 8' 5-Row Panel Clamp with 18, 3-1\/2\" High Jaw 40\" Long Clamps","description":"\u003cp style=\"text-align: center;\"\u003eAdditional clamps ship free! Contact us for your custom quote at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e or \u003cstrong\u003esales@oaktreesupplies.com\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eJLT’s Most Popular Panel Clamp for custom shops specializing in cutting boards, table tops, and more. With five total gluing levels, you can produce 50+ edge glued panels a day!\u003c\/p\u003e\n\u003cp\u003eThe #79F-8-PC 8 ft. Panel Clamp comes with eighteen (18) 40\" high jaw opening clamps. With minimal maintenance and strong steel construction, these clamps can last a lifetime. Mounting plates on the back of the clamps allow for quick and easy attachment to the clamp rack. Easily slide the clamps left to right to create your desired setup.\u003c\/p\u003e\n\u003cp\u003eEach clamp can achieve up to 3,000 lbs. of clamping force. The patented equalizer design of the #79F-8-PC provides equal clamping force from both the front and rear jaws, resulting in high-quality panels with even more glue line pressure. When the clamps are not in use, they can be hung vertically to save you space around the shop.\u003c\/p\u003e\n\u003cp\u003eThis free-standing unit boasts an impressive 3,000 lbs. weight capacity. The robotically-welded, 100% steel construction is guaranteed to never twist, bow, or bend under normal working conditions. Plus, all welded components come with a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eAdd a\u003cspan\u003e \u003c\/span\u003e\u003ca title='JLT 40\" Pneumatic Panel Flattener' href=\"https:\/\/www.oaktreesupply.com\/collections\/all-professional-clamps\/products\/jlt-pneumatic-panel-flattener\" target=\"_blank\"\u003epanel flattener\u003c\/a\u003e to flatten your bowed stock material up to 2-1\/2\" thick for a perfect panel.\u003c\/p\u003e\n\u003cp\u003eSome images may show old style of clamps. Check out the \u003ca rel=\"noopener\" title='JLT 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" target=\"_blank\"\u003e40\" Clamp product page\u003c\/a\u003e to see the updated design.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduce 50+ edge-glued panels per day with a standard setup\u003c\/li\u003e\n\u003cli\u003eFive (5) total gluing levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpace-saving feature allows clamps to be hung vertically when not in use\u003c\/li\u003e\n\u003cli\u003ePatented equalizer design provides equal clamping force from front and rear jaws for better-quality panels\u003c\/li\u003e\n\u003cli\u003e3-Year warranty on clamps\u003c\/li\u003e\n\u003cli\u003e100% steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eApprox. machine footprint (L x W x H):\u003c\/strong\u003e 97\" x 48\" x 80\"\u003cbr\u003e\u003cstrong\u003eWeight capacity:\u003c\/strong\u003e 3,000 lbs.\u003cbr\u003e\u003cstrong\u003eApprox. shipping dimensions (L x W x H):\u003c\/strong\u003e 100\" x 45\" x 30\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamp Rack\u003c\/li\u003e\n\u003cli\u003e(18) 3-1\/2\" High Jaw 40\" Long Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31580670394486,"sku":"#79F-M2-8-PC","price":5975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/79F-8-PC-1.jpg?v=1674681623"},{"product_id":"jlt-12-panel-clamp-with-30-3-1-2-high-jaw-40-long-clamps","title":"JLT 12' 5 Row Panel Clamp with 30, 3-1\/2\" High Jaw 40\" Long Clamps","description":"\u003cp\u003e\u003cb\u003eNote: \u003c\/b\u003eDue to the size of this product, freight fees vary. Please contact us at \u003cstrong\u003e260-637-0054\u003c\/strong\u003e or \u003cstrong\u003esales@oaktreesupplies.com\u003c\/strong\u003e to get a freight quote and place your order.\u003c\/p\u003e\n\u003cp\u003eEdge glue a wide variety of solid wood components with JLT’s Most Popular Panel Clamp Model. Produce up to 72 edge glued panels per day.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(30) Taylor Clamps Arranged on up to (5) Total Gluing Levels\u003c\/li\u003e\n\u003cli\u003eVersatility to Edge Glue Hundreds of Woodworking Components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJLT Clamp arms are built to last. With minimal maintenance and strong steel construction, these clamps can last a lifetime. Mounting Plates on the back of the clamps allow for quick and easy attaching of the clamps onto the clamp rack. Easily slide the clamps left to right to create a desired setup.\u003c\/p\u003e\n\u003cp\u003eEach clamp can achieve up to 3,000 lbs. of clamping force. The patented Equalizer Design provides equal clamping from the front and rear jaws, resulting in a higher quality panel. An innovative \u003cspan\u003espace-saving \u003c\/span\u003e\u003cspan\u003ef\u003c\/span\u003e\u003cspan\u003eeature allows the \u003c\/span\u003e\u003cspan\u003ec\u003c\/span\u003e\u003cspan\u003elamps to be hung vertically when not in use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eJLT clamps are guaranteed to never twist, bow, or bend - covered by their 3 Year Warranty.\u003c\/p\u003e\n\u003cp\u003eSome images may show old style of clamps. Check out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" title='JLT 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e40\" Clamp product page\u003c\/a\u003e to see the updated design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(5) total gluing levels\u003c\/li\u003e\n\u003cli\u003eEdge glue a variety of solid wood components\u003c\/li\u003e\n\u003cli\u003eVertical clamp hanger feature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% steel tubular construction\u003c\/li\u003e\n\u003cli\u003eProduce up to 72 edge glued panels per day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. capacity (L x W): \u003c\/strong\u003e144\" x 40\"\u003cstrong\u003e\u003cbr\u003eMachine footprint (L x H x W):\u003c\/strong\u003e 148″ x  70″ x 48″\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(30) 3-1\/2″ High Jaw 40″ opening clamps (52\" clamps available upon request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584611434614,"sku":"#79F-M2-12-PC","price":9400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/79F-12-PC.jpg?v=1633568461"},{"product_id":"jlt-6-panel-clamp-with-8-3-1-2-high-jaw-40-opening-clamps","title":"JLT 6' 5-Row Panel Clamp with 10, 3-1\/2\" High Jaw 40\" Opening Clamps","description":"\u003cp style=\"text-align: center;\"\u003eAdditional clamps ship free! Contact us for your custom quote at \u003cstrong\u003e(260) 637-0054\u003c\/strong\u003e or \u003cstrong\u003esales@oaktreesupplies.com\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eJLT's Most Compact Panel Clamp, perfect for small or hobby shops specializing in cutting boards, cabinet doors, and more. Produce 20+ edge-glued panels per day!\u003c\/p\u003e\n\u003cp\u003eThe #79F-M2-6-PC 6 ft. Panel Clamp comes with ten (10) 40\" high jaw opening clamps. With minimal maintenance and strong steel construction, these clamps can last a lifetime. Mounting plates on the back of the clamps allow for quick and easy attachment to the clamp rack. Easily slide the clamps left to right to create your desired setup.\u003c\/p\u003e\n\u003cp\u003eEach clamp can achieve up to 3,000 lbs. of clamping force. The patented equalizer design of the #79F-M2-6-PC provides equal clamping force from both the front and rear jaws, resulting in high-quality panels with even more glue line pressure. When the clamps are not in use, they can be hung vertically to save you space around the shop.\u003c\/p\u003e\n\u003cp\u003eWhile it is compact, this free-standing unit boasts an impressive 1,500 lbs. weight capacity. The robotically-welded, 100% steel construction is guaranteed to never twist, bow, or bend under normal working conditions. Plus, all welded components come with a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eAdd a\u003cspan\u003e \u003c\/span\u003e\u003ca title='JLT 40\" Pneumatic Panel Flattener' href=\"https:\/\/www.oaktreesupply.com\/collections\/all-professional-clamps\/products\/jlt-pneumatic-panel-flattener\" target=\"_blank\"\u003epanel flattener\u003c\/a\u003e to flatten your bowed stock material up to 2-1\/2\" thick for a perfect panel.\u003c\/p\u003e\n\u003cp\u003eSome images may show old style of clamps. Check out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" title='JLT 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e40\" Clamp product page\u003c\/a\u003e to see the updated design.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduce 20+ edge-glued panels per day with a standard setup\u003c\/li\u003e\n\u003cli\u003eFive (5) total gluing levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpace-saving feature allows clamps to be hung vertically when not in use\u003c\/li\u003e\n\u003cli\u003ePatented equalizer design provides equal clamping force from front and rear jaws for better-quality panels\u003c\/li\u003e\n\u003cli\u003e3-Year warranty on clamps\u003c\/li\u003e\n\u003cli\u003e100% steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax. capacity (L x W):\u003c\/strong\u003e 72\" x 40\"\u003cbr\u003e\u003cstrong\u003eApprox. machine footprint: (L x H x W):\u003c\/strong\u003e 75\" x 70\" x 48\"\u003cbr\u003e\u003cstrong\u003eWeight capacity:\u003c\/strong\u003e 1,500 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eClamp rack\u003c\/li\u003e\n\u003cli\u003e(10) 3-1\/2″ High Jaw 40″ opening clamps (52″ Clamps available upon request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584661766262,"sku":"#79F-M2-6-PC","price":3975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/79F-6-PC-1.jpg?v=1674681437"},{"product_id":"jlt-16-rail-post-clamping-system-with-36-3-1-2-high-jaw-40-clamps","title":"JLT 16' Rail \u0026 Post Clamping System With 36, 3-1\/2\" High Jaw 40\" Clamps","description":"\u003cp\u003e\u003cb\u003eNote: \u003c\/b\u003eDue to the size of this product, freight fees vary. Please contact us at \u003cstrong\u003e260-637-0054\u003c\/strong\u003e or \u003cstrong\u003esales@oaktreesupplies.com\u003c\/strong\u003e to get a freight quote and place your order.\u003c\/p\u003e\n\u003cp\u003eJLT Clamping System for the custom woodworker who produces 16′ railing, long posts, and face glue solid wood components up to 6″ thick. Produce 84+ edge glued panels per day with a standard setup.\u003c\/p\u003e\n\u003cp\u003eThese clamps feature Rocker Plate Adapters, which are designed to affix to the front and rear jaw plate on the Taylor Clamp and raise the overall height of the jaw to 6” high. This eliminates the need to put clamps on top. Engineered to pivot on the clamp, which provides equal clamping pressure throughout the wood component for a stronger higher quality glue joint. Creates an easier simpler way to glue up thick stock components.\u003c\/p\u003e\n\u003cp\u003eJLT Clamp arms are built to last. With minimal maintenance and strong steel construction, these clamps can last a lifetime. Mounting Plates on the back of the clamps allow for quick and easy attaching of the clamps onto the clamp rack. Easily slide the clamps left to right to create a desired setup.\u003c\/p\u003e\n\u003cp\u003eEach clamp can achieve up to 3,000 lbs. of clamping force. The patented Equalizer Design provides equal clamping from the front and rear jaws, resulting in a higher quality panel. An innovative \u003cspan\u003espace-saving \u003c\/span\u003e\u003cspan\u003ef\u003c\/span\u003e\u003cspan\u003eeature allows the \u003c\/span\u003e\u003cspan\u003ec\u003c\/span\u003e\u003cspan\u003elamps to be hung vertically when not in use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eJLT clamps are guaranteed to never twist, bow, or bend - covered by their 3 Year Warranty.\u003c\/p\u003e\n\u003cp\u003eSome images may show old style of clamps. Check out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" title='JLT 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e40\" Clamp product page\u003c\/a\u003e to see the updated design.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e5 total gluing levels\u003c\/li\u003e\n\u003cli\u003eVertical clamp hanger feature\u003c\/li\u003e\n\u003cli\u003eTaylor’s patented and successful Clamp Arm Design\u003c\/li\u003e\n\u003cli\u003eVersatility to edge glue or face glue hundreds of woodworking components\u003c\/li\u003e\n\u003cli\u003eProduce 84+ edge glued panels per day\u003c\/li\u003e\n\u003cli\u003e100% steel tubular construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax capacity (L x W):\u003c\/strong\u003e 192\" x 40\"\u003cbr\u003e\u003cstrong\u003eMachine footprint (L x H x W):\u003c\/strong\u003e 196\" x 70\" x 48\"\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(36) 3-1\/2″ High Jaw 40″ opening clamps (52\" available upon request)\u003c\/li\u003e\n\u003cli\u003e(72) Rocker Adapter Plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584674545782,"sku":"#79F-16-PC","price":12100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/79F-16-PC.jpg?v=1701293075"},{"product_id":"jlt-8-buddy-system-combo-clamp","title":"JLT 8' Buddy System Combo Clamp","description":"\u003cp\u003e\u003cb\u003eNote: \u003c\/b\u003eDue to the size of this product, freight fees vary. Please contact us at \u003cstrong\u003e260-637-0054\u003c\/strong\u003e or \u003cstrong\u003esales@oaktreesupplies.com\u003c\/strong\u003e to get a freight quote and place your order.\u003c\/p\u003e\n\u003cp\u003eThe 8' Buddy System Combo Clamps consists of the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e#717C-6-DC: 6′ Stile and Rail Door Clamp\u003c\/li\u003e\n\u003cli\u003e#79F-8-PC: 8′ Wide Panel Clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 8′ Stile and Rail Door Clamp allows you to clamp and square 100+ doors per day! Its single lever operation makes it easy to use, and the intuitive pin system allows for quicker changeover. Includes 2 vertical clamps and 1 horizontal clamp.\u003c\/p\u003e\n\u003cp\u003eThe 6′ Wide Panel Clamp allows you to produce 50+ edge-glued panels per day. The free standing unit has a 3,000 lb. weight capacity and 100% complete tubular steel construction. Features five total gluing levels. Includes (18) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" title='JLT 40\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e40\" High Jaw Clamps\u003c\/a\u003e (\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-3-1-2-high-jaw-52-opening-clamp-with-handles-for-panel-clamp\" title='JLT 52\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e52\" clamps\u003c\/a\u003e available upon request).\u003c\/p\u003e\n\u003cp\u003eJLT Clamp arms are built to last. With minimal maintenance and strong steel construction, these clamps can last a lifetime. Mounting Plates on the back of the clamps allow for quick and easy attaching of the clamps onto the clamp rack. Easily slide the clamps left to right to create a desired setup.\u003c\/p\u003e\n\u003cp\u003eSome images may show old style of clamps. Check out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" title='JLT 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e40\" Clamp product page\u003c\/a\u003e to see the updated design.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003cstrong\u003e717C-6-DC\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e26\" x 62\" maximum capacity\u003c\/li\u003e\n\u003cli\u003eEasy-to-use single lever operation\u003c\/li\u003e\n\u003cli\u003eFast changeovers\u003c\/li\u003e\n\u003cli\u003eConvenient 15° working angle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003cstrong\u003e79F-8-PC\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInnovative, space-saving feature that allows the Clamps to be hung vertically when not in use\u003c\/li\u003e\n\u003cli\u003eEdge glue and face glue a variety of solid wood components\u003c\/li\u003e\n\u003cli\u003e100% steel tubular construction that creates a flat and even work area for clamping panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMachine footprint (L x W x H):\u003c\/strong\u003e 97\" x 64\" x 70\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(18) 3-1\/2″ High Jaw 40″ opening clamps (52″ clamps available upon request)\u003c\/li\u003e\n\u003cli\u003e(2) Vertical clamps\u003c\/li\u003e\n\u003cli\u003e(1) Horizontal clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584701251702,"sku":"#718A-M3-8","price":11125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/718A-8-1.jpg?v=1738957799"},{"product_id":"jlt-180a-m2-pneumatic-panel-flattener-40","title":"JLT #180A-M2 Pneumatic Panel Flattener 40\"","description":"\u003cp style=\"text-align: left;\"\u003eFlattens your bowed stock material up to 2-1\/2\" thick for a perfect panel. This panel flattener features an easy-to-use pneumatic lever valve activation for the best output. Specially designed for the \u003ca rel=\"noopener\" title='JLT 40\" Opening Clamp with Handles for Panel Clamp product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" target=\"_blank\"\u003eJLT High Jaw 40\" Opening Clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFlattener has a maximum 40\" reach. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-pneumatic-panel-flattener-52-reach\" title='JLT Pneumatic Panel Flattener - 52\" Reach product page' rel=\"noopener\" target=\"_blank\"\u003e52\" version\u003c\/a\u003e also available.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584721666166,"sku":"#180A-M2","price":1575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/180A-M2.jpg?v=1722005145"},{"product_id":"jlt-mini-pod-press","title":"JLT Mini Pod Press 12\" Wide x 42\" Long","description":"\u003cp\u003e\u003cstrong\u003eContact us for your custom quote today! \u003c\/strong\u003e\u003cstrong\u003eEmail \u003cspan style=\"text-decoration: underline;\"\u003esales@oaktreesupplies.com\u003c\/span\u003e or call us at \u003cspan style=\"text-decoration: underline;\"\u003e260-637-0054\u003c\/span\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mini Pod Press is a high-pressure, cold press laminating machine. It features individually controlled top platens and a bottom platen adjustable at 1-1\/2″ increments to a maximum opening of 40″. The Mini Pod Press allows you to face glue a variety of solid wood components up to 12\" wide.\u003c\/p\u003e\n\u003cp\u003eAir pressure and alignment are carefully controlled via dial regulators on each individual platen and air can be locked in for any length of time through the use of a hand-operated level valve. The upper streel platen has a 2\" stroke when air is activated. The Mini Pod Press is powered by a total of (18) 30 in\u003csup\u003e2\u003c\/sup\u003e diaphragm cylinders.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIndividually-controlled top platens and adjustable bottom platen made of 100% steel construction\u003c\/li\u003e\n\u003cli\u003eAir pressure and alignment are controlled via dial regulators on each platen\u003c\/li\u003e\n\u003cli\u003ePowered by (18) 30 in\u003csup\u003e2\u003c\/sup\u003e diaphragm cylinders\u003c\/li\u003e\n\u003cli\u003e30 Tons of clamping pressure @ 120 PSI\u003c\/li\u003e\n\u003cli\u003eStack multiple components up to 12\" wide\u003c\/li\u003e\n\u003cli\u003ePyramid different sized glue ups\u003c\/li\u003e\n\u003cli\u003eModular design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial capacity (W x L):\u003c\/strong\u003e 12\" x 42\"\u003cbr\u003e\u003cstrong\u003eClamping pressure: \u003c\/strong\u003e30 Tons @ 120 PSI\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":31584736837750,"sku":"#78H-12W-42L-40H-M4","price":7570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/78H42inch.jpg?v=1738945308"},{"product_id":"ritter-r200ea-face-frame-assembly-easel","title":"Ritter R200EA Face Frame Assembly Easel","description":"\u003cp\u003eDesigned for pocket joinery face frame construction. The R200EA provides the most efficient and economical method of frame joinery. Flush and tight joint construction is provided on all types of wood. The elimination of dowel boring, dowel and glue insertion, clamping time, and joint misalignment provides up to a 50% reduction in frame construction. The ability to disassemble a frame and reposition a joint without the loss of material adds to the system's productivity. The design of the pocket borer eliminates the need for glue to be applied to the joint.\u003cbr\u003e\u003cbr\u003eFor the assembly of wooden cabinet face frames. This heavy-duty table ensures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/ritter-r200t-single-spindle-counterbore-tub\" title=\"Ritter R200T - Single Spindle Counterbore Tub product page\" rel=\"noopener\" target=\"_blank\"\u003eR200T\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/ritter-r220t-double-spindle-counterbore-tub\" target=\"_blank\" title=\"Ritter R220T - Double Spindle Counterbore Tub product page\" rel=\"noopener\"\u003eR220T\u003c\/a\u003e, to create the screw pocket.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTable dimensions\u003c\/strong\u003e: 5' x 12'\u003cbr\u003e\u003cstrong\u003eVertical angle:\u003c\/strong\u003e 45°\u003cbr\u003e\u003cstrong\u003eSurface table thickness:\u003c\/strong\u003e 1″\u003cbr\u003e\u003cstrong\u003eI-Beam frame:\u003c\/strong\u003e 3″\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Ritter Manufacturing","offers":[{"title":"Default Title","offer_id":42483496354009,"sku":"R200E\/A","price":10390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/r200ea.1.jpg?v=1645466096"},{"product_id":"ritter-r210e-a-face-frame-assembly-table","title":"Ritter R210E\/A Face Frame Assembly Table","description":"\u003cp\u003eFor the assembly of wooden cabinet face frames. This heavy-duty table ensures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the screw pocket\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e5’x12′ Face Frame Table\u003c\/li\u003e\n\u003cli\u003e5-Cylinder Clamp Arm\u003c\/li\u003e\n\u003cli\u003eOpen Back For 60″ Plus Frame Height\u003c\/li\u003e\n\u003cli\u003e45 Degree Vertical Easel\u003c\/li\u003e\n\u003cli\u003eSquaring Bars on Right, Left, and Bottom Sides\u003c\/li\u003e\n\u003cli\u003e1″ Thick Formica Surfaced Table\u003c\/li\u003e\n\u003cli\u003e3″ I-Beam Easel Frame\u003c\/li\u003e\n\u003cli\u003eHold Down Beam with (5) Adjustable Hold Down Cylinders\u003c\/li\u003e\n\u003cli\u003eScrew Driver Not Included\u003c\/li\u003e\n\u003cli\u003eDesigned and Manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Ritter Manufacturing","offers":[{"title":"Default Title","offer_id":42483516014809,"sku":"R210E\/A","price":11890.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/r210.1.jpg?v=1645466489"},{"product_id":"ritter-r275ea-combination-face-frame-door-assembly-table-4-x-8","title":"Ritter R275EA Combination Face Frame \u0026 Door Assembly Table - 4' x 8'","description":"\u003cp\u003eThe Ritter R275EA is a frame assembly system for doweled, mortise and tenon, or screwed-together frames and cabinet doors. This system provides flush and tight joint construction for all types of wood. Clamping time, dowel boring and insertion, and joint misalignment are virtually eliminated, reducing time for frame production by up to 50%.\u003c\/p\u003e\n\u003cp\u003eRitter Combination Tables are designed for all types of frame and door construction. The large easel is excellent for assembling cabinet and furniture face frames, doors, skylight frames, wainscoting, and any other types of frames. Multiple workstations are provided so that you can work on joinery projects simultaneously!\u003c\/p\u003e\n\u003cp\u003eProudly made in Holland, Michigan!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4’ x 8’ assembly table\u003c\/li\u003e\n\u003cli\u003e30° vertical easel\u003c\/li\u003e\n\u003cli\u003eHold-down beam with (3) adjustable cylinders\u003c\/li\u003e\n\u003cli\u003eSquaring bars on left, right, and bottom sides\u003c\/li\u003e\n\u003cli\u003e(4) Universal clamping cylinders \u0026amp; manifold (706.8 LBS of force at 100 PSI)\u003c\/li\u003e\n\u003cli\u003e2\" Cylinder position grid pattern\u003c\/li\u003e\n\u003cli\u003e3\" Bore clamp cylinder housing\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel frame\u003c\/li\u003e\n\u003cli\u003ePerforated steel table\u003c\/li\u003e\n\u003cli\u003eAdjustable pressure from 20 to 130 PSI\u003c\/li\u003e\n\u003cli\u003eFoot treadle\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWorking table area:\u003c\/strong\u003e 95\" x 45.5\"\u003cbr\u003e\u003cstrong\u003eWork height:\u003c\/strong\u003e 31\"\u003cbr\u003e\u003cstrong\u003eFootprint (L x D x H):\u003c\/strong\u003e 115\" x 41\" x 79\"\u003cbr\u003e\u003cstrong\u003eAir:\u003c\/strong\u003e 100 PSI\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Ritter Manufacturing","offers":[{"title":"Default Title","offer_id":42483538526425,"sku":"R275E\/A","price":11790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/r275.jpg?v=1645466780"},{"product_id":"ritter-r375v-raised-panel-door-clamping-table","title":"Ritter R375V Raised Panel Door Clamping Table","description":"\u003cp\u003eThe Ritter 375V Clamping System is designed for any volume of production in door and cabinet shops. This system uses pneumatic clamp cylinders to apply high pressure to the glue line and workpiece—no managing individual bar or pipe clamps! Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly.\u003c\/p\u003e\n\u003cp\u003eRitter's famous heavy-duty Door Assembly Tables are the industry-standard for any size operation. These machines feature customized AC-20 clamping cylinders that provide pressure in the perfect locations for any size cabinet door.\u003c\/p\u003e\n\u003cp\u003eProudly made in Holland, Michigan!\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4' x 8' vertical assembly easel\u003c\/li\u003e\n\u003cli\u003e(6) Universal clamping cylinders \u0026amp; manifold\u003c\/li\u003e\n\u003cli\u003eSquaring bar and fence\u003c\/li\u003e\n\u003cli\u003e2\" Cylinder position grid pattern\u003c\/li\u003e\n\u003cli\u003e3\" Bore clamp cylinder housing\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel frame\u003c\/li\u003e\n\u003cli\u003ePerforated steel table\u003c\/li\u003e\n\u003cli\u003e6 Port manifold with 1\/4\" NPT regulator\u003c\/li\u003e\n\u003cli\u003eAdjustable pressure from 20 to 130 PSI\u003c\/li\u003e\n\u003cli\u003eFood treadle\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eUseable table area:\u003c\/strong\u003e 95\" x 46\"\u003cbr\u003e\u003cstrong\u003eWork height:\u003c\/strong\u003e 31\"\u003cbr\u003e\u003cstrong\u003eVertical easel angle: \u003c\/strong\u003e30°\u003cbr\u003e\u003cstrong\u003eFootprint (L x D x H):\u003c\/strong\u003e 98\" x 28\" x 68\"\u003cbr\u003e\u003cstrong\u003eAir:\u003c\/strong\u003e 80 - 100 PSI\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 778 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 53” x 106” x 30”\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Ritter Manufacturing","offers":[{"title":"Default Title","offer_id":42483555107033,"sku":"R375V","price":9790.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/R375.1.jpg?v=1645467037"},{"product_id":"ritter-r450v-frame-clamping-system","title":"Ritter R450V Frame Clamping System","description":"\u003cp\u003eThe Ritter R450V is designed for high and low volume production requirements. It's the smallest version of Ritter's heavy-duty cabinet door clamping tables. In this system, the operator is freed from the task of managing an individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3′ X 6′ Vertical Assembly Easel\u003c\/li\u003e\n\u003cli\u003e40 Degree Easel Angle\u003c\/li\u003e\n\u003cli\u003e(4) Universal Clamping Cylinders \u0026amp; Manifold\u003c\/li\u003e\n\u003cli\u003eFoot Treadle\u003c\/li\u003e\n\u003cli\u003eManifold with 1\/4″ NPT Regulator\/Gauge\u003c\/li\u003e\n\u003cli\u003eSquaring Bar and Fence\u003c\/li\u003e\n\u003cli\u003eDesigned and Manufactured In the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Ritter Manufacturing","offers":[{"title":"Default Title","offer_id":42483586138329,"sku":"R450V","price":7190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/R450.1.jpg?v=1645467354"},{"product_id":"jlt-190b-m4-heavy-duty-drawer-box-clamping-system","title":"JLT #190B-M4 Heavy Duty Drawer Box Clamping System","description":"\u003cp\u003eThe JLT Heavy Duty Drawer Clamp is designed to clamp and square all doweled and dovetail drawer construction types. Leverage two standard machine frames (10\" x 24\" x 36\" max. capacity) to streamline your workflow. Excellent for high production and custom shops who build their own drawer boxes.\u003c\/p\u003e\n\u003cp\u003eThe Drawer Box Clamp has precise squaring capabilities with ample clamping pressure for your boxes. Aluminum plates make for an excellent, solid clamping surface. Along with JLT's powerful air cylinders, they are sure to close any tough joint.\u003c\/p\u003e\n\u003cp\u003eWith the easy-to-use handle system from JLT, you can quickly change between drawer box sizes, saving time and effort. The Drawer Box Clamp includes a pneumatic lever valve that allows the operator to lock air pressure into place, holding the parts square while the glue sets. There is also a side-mounted lever valve that can be used as a secondary pneumatic control station.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePneumatic foot pedal operation\u003c\/li\u003e\n\u003cli\u003eDual fast-acting horizontal pneumatic clamps with 2\" stroke\u003c\/li\u003e\n\u003cli\u003eAluminum side plates provide a solid, flat clamping surface\u003c\/li\u003e\n\u003cli\u003eQuick adjusting roller carriage eliminates set up for faster changeover\u003c\/li\u003e\n\u003cli\u003e100% welded tubular steel frame\u003c\/li\u003e\n\u003cli\u003e3-Year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eFootprint (L x W x H):\u003c\/strong\u003e 70\" x 36\" x 60\"\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 725 lbs.\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Sets of pressure shoes\u003c\/li\u003e\n\u003cli\u003eSet of aluminum side plates\u003c\/li\u003e\n\u003cli\u003eLever valve pressure hold kit\u003c\/li\u003e\n\u003cli\u003e(2) Pneumatic cross clamps with fast acting diaphragm cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":42902136127705,"sku":"#190B-M4","price":6450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/190B-1.jpg?v=1775498550"},{"product_id":"jlt-pneumatic-panel-flattener-52-reach","title":"JLT #180A-M2-52 Pneumatic Panel Flattener 52\"","description":"\u003cp style=\"text-align: left;\"\u003eFlattens your bowed stock material up to 2-1\/2\" thick for a perfect panel. This panel flattener features an easy-to-use pneumatic lever valve activation for the best output. Specially designed for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-3-1-2-high-jaw-52-opening-clamp-with-handles-for-panel-clamp\" title='JLT 52\" Opening Clamps product page' rel=\"noopener\" target=\"_blank\"\u003eJLT High Jaw 52\" Opening Clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eFlattener has a maximum 52\" reach. \u003ca rel=\"noopener\" title='JLT #180A-M2 Pneumatic Panel Flattener 40\" product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-180a-m2-pneumatic-panel-flattener-40\" target=\"_blank\"\u003e40\" version\u003c\/a\u003e also available.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":43121834623193,"sku":"#180A-M2-52","price":1705.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/180A-M2-52-1.jpg?v=1687196659"},{"product_id":"jlt-3-1-2-high-jaw-52-opening-clamp-with-handles-for-panel-clamp","title":"JLT #812B 3-1\/2\" High Jaw 52\" Opening Clamp with Handles for Panel Clamp","description":"\u003cp\u003eUpdated robust design! Add these 52\" panel clamps to your JLT Clamping System and boost your production. The 100% steel construction is guaranteed to never twist, bow, or bend and comes with a lifetime warranty on all welded components.\u003c\/p\u003e\n\u003cp\u003eThe included mounting plates easily hang and slide into a JLT stationary rack—simply attach with a bolt over the 1\/2\" sq. mounting blocks. Create and customize your glue up rack to your desired setup! The laser-cut, paddle-style jaw latch provides superior securement to the 1\/4\"-thick serrated drawbar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoxed tubular frame is more rigid over previous C-channel\u003c\/li\u003e\n\u003cli\u003e1\/4\"-thick, vertically-oriented serrated drawbar\u003c\/li\u003e\n\u003cli\u003eLatch provides stronger securement to the drawbar\u003c\/li\u003e\n\u003cli\u003eOne-piece welded clamp screw\/drawbar assembly for more stability\u003c\/li\u003e\n\u003cli\u003eMinimum clamp opening as small as 5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in \u003ca rel=\"noopener\" title='JLT 40\" Opening Clamp with Handles for Panel Clamp product page' href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-40-opening-clamp-with-handles-for-panel-clamp\" target=\"_blank\"\u003e40\"\u003c\/a\u003e length.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEach clamp can achieve up to 3,000 lbs. clamping force\u003c\/li\u003e\n\u003cli\u003ePatented Equalizer Design provides equal clamping from the front and rear jaws, resulting in a high quality panel\u003c\/li\u003e\n\u003cli\u003eClamps mounted on a JLT Panel Clamp provide a flat, even surface to ensure better glue ups\u003c\/li\u003e\n\u003cli\u003eJaws are toed in at a 1° angle to help hold boards in place\u003c\/li\u003e\n\u003cli\u003e100% steel construction and a lifetime warranty on all welded components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamp length:\u003c\/strong\u003e 52\"\u003cbr\u003e\u003cstrong\u003eJaw height:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 4-5\/8\"\u003cbr\u003e\u003cstrong\u003eMin. clamp opening:\u003c\/strong\u003e 5\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":43121886101721,"sku":"#812B-M1-3.5J-52L-H-R","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/812Bclamp_c9d23359-1e4c-4c4a-8ba4-39e4d886146e.jpg?v=1770822727"},{"product_id":"jlt-40-opening-clamp-with-handles-for-panel-clamp","title":"JLT #812B 3-1\/2\" High Jaw 40\" Opening Clamp with Handles for Panel Clamp","description":"\u003cp\u003eUpdated robust design! Add these 40\" panel clamps to your JLT Clamping System and boost your production. The 100% steel construction is guaranteed to never twist, bow, or bend and comes with a lifetime warranty on all welded components.\u003c\/p\u003e\n\u003cp\u003eThe included mounting plates easily hang and slide into a JLT stationary rack—simply attach with a bolt over the 1\/2\" sq. mounting blocks. Create and customize your glue up rack to your desired setup! The laser-cut, paddle-style jaw latch provides superior securement to the 1\/4\"-thick serrated drawbar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoxed tubular frame is more rigid over previous C-channel\u003c\/li\u003e\n\u003cli\u003e1\/4\"-thick, vertically-oriented serrated drawbar\u003c\/li\u003e\n\u003cli\u003eLatch provides stronger securement to the drawbar\u003c\/li\u003e\n\u003cli\u003eOne-piece welded clamp screw\/drawbar assembly for more stability\u003c\/li\u003e\n\u003cli\u003eMinimum clamp opening as small as 5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jlt-3-1-2-high-jaw-52-opening-clamp-with-handles-for-panel-clamp\" title='JLT 52\" Opening Clamp with Handles for Panel Clamp product page' rel=\"noopener\" target=\"_blank\"\u003e52\"\u003c\/a\u003e length.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEach clamp can achieve up to 3,000 lbs. clamping force\u003c\/li\u003e\n\u003cli\u003ePatented Equalizer Design provides equal clamping from the front and rear jaws, resulting in a high quality panel\u003c\/li\u003e\n\u003cli\u003eClamps mounted on a JLT Panel Clamp provide a flat, even surface to ensure better glue ups\u003c\/li\u003e\n\u003cli\u003eJaws are toed in at a 1° angle to help hold boards in place\u003c\/li\u003e\n\u003cli\u003e100% steel construction and a lifetime warranty on all welded components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamp length:\u003c\/strong\u003e 40\"\u003cbr\u003e\u003cstrong\u003eJaw height:\u003c\/strong\u003e 3-1\/2\"\u003cbr\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 4-5\/8\"\u003cbr\u003e\u003cstrong\u003eMin. clamp opening:\u003c\/strong\u003e 5\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":43121909530841,"sku":"#812B-M1-3.5J-40L-H-R","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/812Bclamp.jpg?v=1770822690"},{"product_id":"festool-kapex-hold-down-clamp-kl-ks-120","title":"Festool Kapex Hold Down Clamp KL-KS 120","description":"\u003cp\u003eReplacement clamp for securing material to the deck of the KAPEX miter saw. Fast-action cam design enables quick and secure material clamping for safer cutting. A non-marring plastic foot protects the material during cutting operations, and is octagonally shaped, providing secure clamping adjacent to the fence.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCan be used for securing material left or right of blade. Includes one clamp.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFast-action cam design enables quick and secure material clamping for safer cutting\u003c\/li\u003e\n\u003cli\u003eNon-marring plastic foot protects the material during cutting operations\u003c\/li\u003e\n\u003cli\u003eOctagonally shaped foot provides secure clamping adjacent to the fence\u003c\/li\u003e\n\u003cli\u003eEasily placed for securing material left or right of blade\u003c\/li\u003e\n\u003cli\u003eCan be used on the left or right\u003c\/li\u003e\n\u003cli\u003eWorkpiece clamp for securing workpieces\u003c\/li\u003e\n\u003cli\u003eIncluded in the contents of the KS 120\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.36\"\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 5.51\"\u003cbr\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 12.8\"\u003cbr\u003e\u003cstrong\u003eMax. height of workpiece:\u003c\/strong\u003e 4-3\/4\" (120 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43453043835097,"sku":"494391","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494391-1.jpg?v=1754021442"},{"product_id":"festool-quick-clamp-mft-hz-80","title":"Festool Quick Clamp MFT-HZ 80","description":"\u003cp\u003eThe MFT lever clamp securely holds workpieces without slipping. It is ideal for machining workpieces of any size and shape when sanding, planing, drilling, gluing, etc.\u003c\/p\u003e\n\u003cp\u003eIt is compatible with the MFT hole pattern, meaning it easily attaches to the \u003ca title=\"Festool MFT\/3 Table product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/multifunction-table-mft-3\" target=\"_blank\"\u003eFestool Multifunction Table (MFT\/3)\u003c\/a\u003e. The clamp lever makes it quick and convenient to clamp and release workpieces using only one hand.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic lever makes it simple to clamp and release material using one hand\u003c\/li\u003e\n\u003cli\u003eRound and flat workpieces can be securely clamped on the MFT\/3 thanks to the vertical clamping action\u003c\/li\u003e\n\u003cli\u003eAble to clamp different materials up to a height of 3-1\/8\" (80mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax height of workpiece:\u003c\/strong\u003e 3-1\/8\" (80mm)\u003cbr\u003e\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 5-1\/8\" x 1-9\/16 x 6-1\/16\" (130 x 40 x 155mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43537974952153,"sku":"577132","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/577132-1.jpg?v=1754021431"},{"product_id":"microjig-matchfit-x-pads-4-pack","title":"MicroJig MATCHFIT X-Pads (4 Pack)","description":"\u003cp\u003eFor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/clamps-menu\/brand_microjig\" target=\"_blank\" title=\"All MicroJig Clamps\" rel=\"noopener noreferrer\"\u003eMATCHFIT Dovetail Clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eLike two clamps in one.\u003c\/p\u003e\n\u003cp\u003eThe X-PAD is an upgrade for MATCHFIT Dovetail Clamps that allows you to clamp in two directions at once, achieving in-line clamping with unrestricted clamp positioning. The X-PAD applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.\u003c\/p\u003e\n\u003cp\u003eSimply slide the X-PAD onto the round cap of any MATCHFIT Dovetail Clamp to add a whole new level of functionality.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe X-PAD™ is an upgrade for MATCHFIT Dovetail Clamps that allows you to clamp in two directions at once—achieving in-line clamping with unrestricted clamp positioning\u003c\/li\u003e\n\u003cli\u003eIn-line pressure with zero lift. The X-PAD applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps\u003c\/li\u003e\n\u003cli\u003eClamp round or oblong stock with ease. The V-groove profile gives you two points of contact to clamp. Simply turn the X-PAD 90º to clamp round and oblong-profile stock with a single clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/qneb8YSv4ac\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":44046874771673,"sku":"X-PAD-K4","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/X-PAD-K4-1.jpg?v=1692813465"},{"product_id":"bessey-kp-framing-blocks-4-pack","title":"Bessey KP Framing Blocks (4 Pack)","description":"\n\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/bessey-k-body-clamps\" title=\"Bessey K Body Clamps product page\" target=\"_blank\"\u003eBessey K Body Clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe KP Blocks are perfect for four corner framing, Clamping force is applied precisely so that each component is aligned at 90°. 4 per set.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSet of four 90 degrees clamping blocks for framing work\u003c\/li\u003e\n\u003cli\u003eThe clamping pressure can be set separately for each corner\u003c\/li\u003e\n\u003cli\u003eIdeal for pictures, drawers, and doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/D24z4nnRJsM?si=5gOMWhB8rhKgnP_9\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":44052359643353,"sku":"KP","price":21.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/KP-1.jpg?v=1692975301"},{"product_id":"bessey-angle-clamp-with-2k-handle","title":"Bessey Angle Clamp with 2K Handle","description":"\u003cp\u003eBessey's Angle Clamp with 2K Handle is ideal for clearance of dowels, screws, or staples while gluing. The free floating jaw allows you to clamp dissimilar thickness\/width workpieces together at a perfect 90° angle. It also adjusts automatically to wood thickness. The 2K composite handle has a comfort insert for less hand fatigue.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSturdy frame:\u003c\/strong\u003e Die-cast jaws are plastic coated to protect work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e Designed for clearance of dowels, screws or staples while gluing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight angle clamping:\u003c\/strong\u003e Holds and aligns material at 90° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBessey Comfort Handle:\u003c\/strong\u003e Features the 2K composite handle with comfort insert.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable:\u003c\/strong\u003e Automatically adjust to hold two different sizes of wood together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eClamping capacity:\u003c\/strong\u003e Max 4\" thick on both sides\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.4 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/erqoDOvwSIc?si=n2gLaagwJrUQqTHv\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":44057935479001,"sku":"WS-3+2K-CB","price":25.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/WS-32K-1_8d22e387-106a-4b64-bd36-5578ab80c1da.jpg?v=1744637294"},{"product_id":"bow-products-xt-t-track-clamps-2-pack","title":"BOW Products XT T-Track Clamps (2 Pack)","description":"\u003cp\u003eDesigned for use with \u003ca title=\"BOW Products XT XTENDER Fences product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/bow-products-xt-xtender-fences\" target=\"_blank\"\u003eBOW Products XT XTENDER Fences\u003c\/a\u003e. Clamps slide all the way down in the milled slots of the XTENDER Fence.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eThroat:\u003c\/strong\u003e 2.5\"\u003cbr\u003e\u003cstrong\u003eOpening:\u003c\/strong\u003e 5\"\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"BOW Products","offers":[{"title":"Default Title","offer_id":44142369734873,"sku":"XT2","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/xt2-1.jpg?v=1696966703"},{"product_id":"bessey-k-body-clamps-kre-kit-framing-version","title":"Bessey K Body Clamps KRE Kit - Framing Version","description":"\u003cp\u003eThis kit includes two 24\" K Body REVO Clamps, two 40\" K Body REVO Clamps, and four KP Blocks.\u003c\/p\u003e\n\u003cp\u003eThe Bessey fixed jaw parallel clamps are class-leading examples of Bessey's commitment to continuous improvement. Powerful 90° no-slip clamps rated at a nominal 1,700 lbs. of everyday clamping force. These clamps can be quickly and easily set up for clamping or spreading without the use of secondary tools. Ideal for precision cabinetry, heavy-duty laminations, and robust general clamping.\u003c\/p\u003e\n\u003cp\u003eThe KP Blocks are perfect for four corner framing. Clamping force is applied precisely so that each component is aligned at 90°.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWell thought-out:\u003c\/strong\u003e Ergonomically-formed 2-component handle with steel socket for applying force with a hex key or drive when desired (max. torque 17 Nm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerful and simple:\u003c\/strong\u003e Secure clamping force up to 1,7000 lbs. Operating jaw stays where you put it for easy set up. Position where you like and apply clamping force\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise and gentle:\u003c\/strong\u003e Workpieces with sensitive surfaces can be clamped and spread, parallel to each other. Workpiece supports also prevent it from coming into contact with the rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold drawn steel rail bar:\u003c\/strong\u003e Produced and tested at Bessey's own mills with consistently high quality and the utmost precision in cutting-edge facilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge clamping surfaces:\u003c\/strong\u003e Clamping surfaces are perpendicular to the rail. Three removable pressure caps that are repellent to glue and resistant to paint and grease solvents. Large surface areas distribute high clamping force evenly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 24\" K Body REVO Clamps\u003c\/li\u003e\n\u003cli\u003e(2) 40\" K Body REVO Clamps\u003c\/li\u003e\n\u003cli\u003e(4) KP Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":44630817603801,"sku":"KREK2440","price":238.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/KREK2440.jpg?v=1707490635"},{"product_id":"bessey-stc-set-for-mft-tables","title":"Bessey STC-Set for MFT Tables","description":"\u003cp\u003eFor using Bessey Toggle Clamps (both \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/bessey-auto-adjust-toggle-clamps-inline\" target=\"_blank\" title=\"Bessey Auto-Adjust Toggle Clamps - Inline product page\" rel=\"noopener noreferrer\"\u003eInline\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/bessey-auto-adjust-toggle-clamps-horizontal\" target=\"_blank\" title=\"Bessey Auto-Adjust Toggle Clamps - Horizontal product page\" rel=\"noopener noreferrer\"\u003eHorizontal\u003c\/a\u003e) on multifunction tables such as \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/tables-components-menu\/brand_festool\" target=\"_blank\" title=\"All Festool Tables\" rel=\"noopener noreferrer\"\u003eFestool MFT\u003c\/a\u003e and others with a hole diameter of 20 mm and plate thickness of 19 mm to 25 mm.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Cylindrical screw M8 x 35 mm\u003c\/li\u003e\n\u003cli\u003e(1) Lock pin 20 mm OD x 17 mm L\u003c\/li\u003e\n\u003cli\u003e(1) Knurled knob with M8 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Bessey","offers":[{"title":"Default Title","offer_id":44650877747417,"sku":"STC-SET-T20","price":16.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/stc-setmain.jpg?v=1708118776"},{"product_id":"wilton-6-1-2-jaw-light-duty-woodworkers-vise","title":"Wilton 6-1\/2\" Jaw Light-Duty Woodworkers Vises (Set of 2)","description":"\u003cp\u003eThis light-duty vise is ideal for light tradesmen and home craftsmen alike. The high-tensile iron jaws provide strength and durability. Cold rolled steel guide bars offer strength and integrity to the tool, and precast mounting holes allow for installation of wood jaw faces.\u003c\/p\u003e\n\u003cp\u003eIncludes 2 vises.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCold rolled steel guide bars and chrome-plated screw offer strength and integrity to the tool\u003c\/li\u003e\n\u003cli\u003eHigh-tensile iron jaws provide strength and durability\u003c\/li\u003e\n\u003cli\u003eLightweight design is perfect for home craftsmen\u003c\/li\u003e\n\u003cli\u003ePrecast mounting holes allow for installation of wood jaw faces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJaw width:\u003c\/strong\u003e 6-1\/2\"\u003cbr\u003e\u003cstrong\u003eJaw depth:\u003c\/strong\u003e 1-5\/16\"\u003cbr\u003e\u003cstrong\u003eMax. jaw opening:\u003c\/strong\u003e 4-1\/2\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 6 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Wilton","offers":[{"title":"Default Title","offer_id":44778729636057,"sku":"WL9-33176","price":53.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/33176-1.jpg?v=1709837677"},{"product_id":"shaper-reversible-clamps","title":"Shaper Reversible Clamps (2 Pack)","description":"\n\u003cp\u003eReverse your clamping direction at the push of a button.\u003c\/p\u003e\n\u003cp\u003eShaper’s Reversible Clamps are completely reconfigurable. Want to go from clamping to spreading? Simply push the button on the clamp head and reverse the direction. These clamps are perfect for \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/shaper-origin-shaper-work-station\" title=\"Shaper Workstation product page\" rel=\"noopener\" target=\"_blank\"\u003eWorkstation\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eReconfigurable and bi-directional\u003c\/li\u003e\n\u003cli\u003eT-Track compatible\u003c\/li\u003e\n\u003cli\u003eEngineered by \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/bessey\" title=\"All Bessey\" rel=\"noopener\" target=\"_blank\"\u003eBessey\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerfect for Workstation and Plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 13.8\"\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 6.7\"\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 1.6\"\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/8RFVHI1dkVs?si=0IZfLkHArJVsOg5j\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Shaper Tools","offers":[{"title":"Default Title","offer_id":45864099479769,"sku":"SU1-RC150","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/SU1-RC150-1.jpg?v=1724677674"},{"product_id":"makita-guide-rail-clamp-2-pk","title":"Makita Guide Rail Clamps (2 Pack)","description":"\u003cp\u003eCompatible with Makita Guide Rails, as well as Festool Track Saw Guide Rails.\u003c\/p\u003e\n\u003cp\u003eThe Makita 2-piece Guide Rail Clamp Set is engineered for use with the Makita Corded and Cordless 6-1\/2\" Plunge Circular Saws and Makita Guide Rails. The clamp set is engineered to hold the guide rail securely in place. When used together (Makita 6-1\/2\" Plunge Circular Saws, Guide Rails, Clamp Set), the result is a more portable option to a table saw for ripping sheet material.\u003c\/p\u003e\n\u003cp\u003eEvery Makita product carries a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e unless otherwise stated. (Some products have a longer warranty, i.e. Lithium-Ion Tools, Batteries \u0026amp; Chargers include a 3-year warranty, etc.)\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds guide rails or material firmly in place\u003c\/li\u003e\n\u003cli\u003eQuick and easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Makita and Festool Guide Rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":45943601856729,"sku":"191J52-3","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/191J52-3-1.jpg?v=1727457091"},{"product_id":"wilton-3-low-profile-drill-press-vice","title":"Wilton 3\" Low Profile Drill Press Vice","description":"\u003cp\u003eA low-profile drill press vise for smaller quill travel applications. Backed by Wilton's lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJaw Depth:\u003c\/strong\u003e 1-1\/8\"\u003cbr\u003e\u003cstrong\u003eJaw Width:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e LP3\u003cbr\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Lifetime\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Wilton","offers":[{"title":"Default Title","offer_id":45948977414361,"sku":"WL9-11743","price":70.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/WL9-11743.jpg?v=1734623958"},{"product_id":"microjig-matchfit-cnc-ring-clamps-2-pack","title":"MicroJig MATCHFIT Ring Clamps (2 Pack)*","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Final sale.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMicroJig MATCHFIT Ring Clamps are the ultimate twist-to-tighten, cam-action, in-line dovetail clamps for your MATCHFIT Dovetail Track System. With superior workholding and a low-profile, efficient design, you'll never want to go back to using standard in-line clamps. Route your own dovetail clamp track exactly where you need it using a standard 14° by 1\/2\" dovetail bit, or achieve tear-out-free cuts with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/microjig-matchfit-dovetail-router-bit-1-2-shank\" title='MicroJig Matchfit Dovetail Router Bit 1\/2\" Shank product page' rel=\"noopener\" target=\"_blank\"\u003eMATCHFIT Dovetail Router Bit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional in-line clamps that are limited by fixed dog holes, the MATCHFIT Ring Clamps slide effortlessly along the dovetail track, allowing you to position them directly against your material for optimal hold. This flexibility saves time and ensures that your material stays flush to the surface—no more frustrating workpiece lifting.\u003c\/p\u003e\n\u003cp\u003eWhether you're clamping jigs, sleds, or working on table toppers, these clamps deliver secure, precise lateral pressure with a twist-to-tighten cam action that keeps your tool paths clear. Their low-profile design makes them ideal for operations where you need a clear and uninterrupted work surface—perfect for hand planing, routing, fine chisel work, CNC, and laser engraving.\u003c\/p\u003e\n\u003cp\u003eThe sloped clamping edge enhances grip on both straight and curved materials, while the 3\/16\" edge ensures that router bits can operate freely in tight corners. Seamless integration is ensured with the included dovetail hardware, making these clamps suitable for both beginner and advanced woodworkers. They're also excellent for use with table saws, router tables, and bandsaw sleds.\u003c\/p\u003e\n\u003cp\u003eWith the MATCHFIT Ring Clamps, you eliminate the frustrations of traditional in-line clamps and gain a secure, low-profile work-holding solution that keeps your material firmly in place. Slide them along the dovetail track for precise, quick positioning, and enjoy a flush work surface for your woodworking projects.\u003c\/p\u003e\n\u003cp\u003eAlso available with other clamps and hardware in the \u003ca rel=\"noopener\" title=\"MicroJig MATCHFIT CNC Workholding Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/microjig-matchfit-cnc-workholding-kit\" target=\"_blank\"\u003eMATCHFIT CNC Workholding Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRout Your Own Dovetail Clamp Track:\u003c\/strong\u003e Designed for 14° by 1\/2\" dovetail grooves for exact positioning where you need it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlide and Clamp: \u003c\/strong\u003eEasily slide the ring clamp along the dovetail track to position directly against your material, avoiding the limitations of dog hole spacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush Work Surface:\u003c\/strong\u003e Keeps material flush to the table, preventing lifting common with other in-line clamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-to-Tighten Cam Action: \u003c\/strong\u003eEnsures secure lateral clamping with a smooth twist while maintaining a clear tool path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/16\" Tool Clearance:\u003c\/strong\u003e Allows router bits to work tight corners without obstruction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDovetail Hardware Included:\u003c\/strong\u003e Integrates smoothly into the MATCHFIT System for fast setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Workholding:\u003c\/strong\u003e Perfect for routing, sanding, chiseling, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Ring Clamp Disks Part 2A\u003c\/li\u003e\n\u003cli\u003e(2) Ring Clamp Hubs Part 2B\u003c\/li\u003e\n\u003cli\u003e(2) Dovetail Track Screws 1.0\"\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 Wing Knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":46361083674841,"sku":"CN-P2K2","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/CN-P2K2-1.jpg?v=1738692973"},{"product_id":"microjig-matchfit-u-pads-2-pack","title":"MicroJig MATCHFIT U Pads (2 Pack)*","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Final sale.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the MATCHFIT U-Pad Clamps—an innovative dovetail clamping solution for the MATCHFIT Dovetail Track System, designed to eliminate workspace obstructions while delivering precise, versatile clamping.\u003c\/p\u003e\n\u003cp\u003eIdeal for a wide range of work-holding setups, these low-profile clamps offer exceptional flexibility, allowing you to route custom dovetail tracks using a standard 14° by 1\/2\" dovetail router bit. Whether you're working with jigs, fixtures, or on a MATCHFIT clamping table, these clamps provide the secure hold-down support you need.\u003c\/p\u003e\n\u003cp\u003eWith the MATCHFIT U-Pad Clamps, you can clamp parts along the top and side edges simultaneously, a major advantage over bulky traditional clamps that are limited to dog holes or costly T-tracks. The U-Pad Clamps are engineered for superior pressure application with a simple twist of the knob, capable of holding materials from as thin as 1\/16\" (1.5mm) to as thick as 1-1\/8\" (28.5mm). An included step riser block makes it easy to clamp thicker materials for glue-ups, routing, sanding, or assembly.\u003c\/p\u003e\n\u003cp\u003eWorks with grooves created by a 14° x 1\/2\" dovetail bit, such as the \u003ca rel=\"noopener\" title='MicroJig Matchfit Dovetail Router Bit 1\/2\" Shank product page' href=\"https:\/\/www.oaktreesupply.com\/products\/microjig-matchfit-dovetail-router-bit-1-2-shank\" target=\"_blank\"\u003eMATCHFIT Dovetail Router Bit\u003c\/a\u003e. Also available with other clamps and hardware in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/microjig-matchfit-cnc-workholding-kit\" title=\"MicroJig MATCHFIT CNC Workholding Kit product page\" rel=\"noopener\" target=\"_blank\"\u003eMATCHFIT CNC Workholding Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Hold-Down:\u003c\/strong\u003e Secure materials with pinpoint accuracy along a 14° by 1\/2\" dovetail track, ensuring a strong hold without getting in the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Workholding:\u003c\/strong\u003e Clamps materials as thin as 1\/16\" and as thick as 1-1\/8\", perfect for a variety of applications including routing, sanding, and milling—no tools required for setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360° Clamping:\u003c\/strong\u003e Low-profile design grips materials from all sides, making it ideal for sleds, workbenches, CNC setups, and custom jigs or fixtures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDovetail Tracks Anywhere:\u003c\/strong\u003e Slides freely along custom dovetail tracks, offering flexibility that traditional dog holes and expensive T-tracks can't match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Fence for Stability:\u003c\/strong\u003e Keeps materials locked in place during cuts, ensuring superior control and precision for every project.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrusted Worldwide:\u003c\/strong\u003e Join woodworkers around the globe who depend on the MATCHFIT Dovetail Track System for innovative, versatile, and reliable work-holding solutions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(2) U-Pad Bases Part 4A\u003c\/li\u003e\n\u003cli\u003e(2) U-Pad Screw Adapters Part 4B\u003c\/li\u003e\n\u003cli\u003e(2) U-Pad Blocks Part 4C\u003c\/li\u003e\n\u003cli\u003e(2) Dovetail Track Screws 2\"\u003c\/li\u003e\n\u003cli\u003e(2) 10-32 Wing Knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Microjig","offers":[{"title":"Default Title","offer_id":46361085706457,"sku":"CN-P4K2","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/CN-P4K2-1.jpg?v=1738694282"},{"product_id":"jlt-mini-pod-press-12-wide-x-84-long","title":"JLT Mini Pod Press 12\" Wide x 84\" Long","description":"\u003cp\u003e\u003cstrong\u003eContact us for your custom quote today! \u003c\/strong\u003e\u003cstrong\u003eEmail \u003cspan style=\"text-decoration: underline;\"\u003esales@oaktreesupplies.com\u003c\/span\u003e or call us at \u003cspan style=\"text-decoration: underline;\"\u003e260-637-0054\u003c\/span\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mini Pod Press is a high-pressure, cold press laminating machine. It features individually controlled top platens and a bottom platen adjustable at 1-1\/2″ increments to a maximum opening of 40″. The Mini Pod Press allows you to face glue a variety of solid wood components up to 12\" wide.\u003c\/p\u003e\n\u003cp\u003eAir pressure and alignment are carefully controlled via dial regulators on each individual platen and air can be locked in for any length of time through the use of a hand-operated level valve. The upper streel platen has a 2\" stroke when air is activated. The Mini Pod Press is powered by a total of (18) 30 in\u003csup\u003e2\u003c\/sup\u003e diaphragm cylinders.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Idaho, Montana, or Utah. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIndividually-controlled top platens and adjustable bottom platen made of 100% steel construction\u003c\/li\u003e\n\u003cli\u003eAir pressure and alignment are controlled via dial regulators on each platen\u003c\/li\u003e\n\u003cli\u003ePowered by (18) 30 in\u003csup\u003e2\u003c\/sup\u003e diaphragm cylinders\u003c\/li\u003e\n\u003cli\u003e30 Tons of clamping pressure @ 120 PSI\u003c\/li\u003e\n\u003cli\u003eStack multiple components up to 12\" wide\u003c\/li\u003e\n\u003cli\u003ePyramid different sized glue ups\u003c\/li\u003e\n\u003cli\u003eModular design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial capacity (W x L):\u003c\/strong\u003e 12\" x 84\"\u003cbr\u003e\u003cstrong\u003eClamping pressure: \u003c\/strong\u003e30 Tons @ 120 PSI\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"JLT","offers":[{"title":"Default Title","offer_id":46372281024729,"sku":"#78H-12W-84L-40H-M4","price":14500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/78H84inch.jpg?v=1738945746"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/clamps-menu\/brand_mafell.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}