{"title":"All Professional Wide Belt Sanders","description":"","products":[{"product_id":"powermatic-43-wide-belt-sander-wb-43","title":"Powermatic 43\" Wide Belt Sander WB-43","description":"\u003cp\u003eThe Powermatic 43\" Wide Belt Sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The sander has centralized controls that allow the user to access all the needed buttons on one simple panel for more convenience. The variable speed feed belt allows the user to accurately dial in the exact feed speed to best suit each project and work environment.\u003c\/p\u003e\n\u003cp\u003eFeatured is a special digital readout control. This element is especially helpful because it will show the exact thickness of the finished piece or will allow the user to preset exactly what thickness they would prefer the finished piece to be. The sander also includes a unique measuring device, the auto thicknesser, that will capture the piece of wood to give the user an exact measurement of the starting thickness.\u003c\/p\u003e\n\u003cp\u003eThe Powermatic 43\" Wide Belt Sander has an air-eye system which controls the oscillation for the 43\" x 75\" sanding belt. This prevents the belt from running off the end of the drums and uses the sanding surface in a more uniform manner. This also ensures sanding lines will not be left on the workpiece.\u003c\/p\u003e\n\u003cp\u003eThe 43\" wide belt sander also has a powerful three-motor system for maximum performance. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor, directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically and with ease. For safety, the Sander has a disc brake, which slows the machine quickly and stops it instantly in the event of an emergency.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentralized controls allow you to access all the needed buttons on one simple panel\u003c\/li\u003e\n\u003cli\u003eDigital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece\u003c\/li\u003e\n\u003cli\u003eThe auto thicknesser will capture the piece of wood to give the user the exact starting thickness\u003c\/li\u003e\n\u003cli\u003eDisc brake slows the machine quickly and will activate immediately to stop machine in an emergency\u003c\/li\u003e\n\u003cli\u003eThe pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums, as well as use the sanding surface more uniformly without leaving sanding lines on the workpiece\u003c\/li\u003e\n\u003cli\u003eThe three motor system allows for maximum horsepower to independently power the sanding drums, the variable speed feed, and the feed table movement.\u003c\/li\u003e\n\u003cli\u003eThe variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAir Required: \u003c\/strong\u003e75- 80\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 1,900 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Motor Power:\u003c\/strong\u003e 2hp\u003cbr\u003e\u003cstrong\u003eMax. Board Thickness:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eMax. Board Width:\u003c\/strong\u003e 43\"\u003cbr\u003e\u003cstrong\u003eMin. Board Length:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eMin. Board Thickness:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 25hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230\/460V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eSanding Belt Speed:\u003c\/strong\u003e 2,625 FPM\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Wide Belt Sander\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 Sanding belts, 100 and 180 Grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":31353406226550,"sku":"PM9-1790843","price":29999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1790825-5_517a2089-4833-4d39-a770-05536a472a5e.jpg?v=1748888327"},{"product_id":"powermatic-37-wide-belt-sander-wb-37","title":"Powermatic 37\" Wide Belt Sander WB-37","description":"\u003cp\u003eThe Powermatic 37\" Wide Belt Sander is designed to deliver ultra precise sanding and a flawless finish in the busy shop environment. Centralized controls grouped on one simple panel make operating this machine easier and safer. A variable speed feed conveyor, a special digital thickness readout control, and an auto thicknesser all make the WB-37 easy to use and more productive. Each Wide Belt Sander also comes with a tool box loaded with necessary tools for service and adjustment.\u003c\/p\u003e\n\u003cp\u003eThe WB-37 Wide Belt Sander uses three individual motors to maximize consistency and performance. The 20HP motor drives the sanding belt drive drums. A 1HP variable speed motor powers the feed belt. Finally, a 1\/4HP motor supplies power to the system that moves the table up and down to vary thickness.\u003c\/p\u003e\n\u003cp\u003eAll frequently used controls are grouped on a centralized panel. This allows the operator to access them or to shut the machine down easily without having to move around the machine. The digital readout eliminates mistakes by displaying the exact thickness that has been entered. For safety, the POWERMATIC WB-37 Wide Belt Sander has a powerful disc brake that slows the machine quickly when it is off. It also stops it instantly in the event of an emergency when the exterior safety bar is depressed.\u003c\/p\u003e\n\u003cp\u003eThe WB-37 Wide Belt Sander comes with 100 and 180-grit belts. A large side door provides full access to the belt system and related controls. Even the belt platen is specially designed with a replaceable graphite pad that can be checked or replaced through the side door. The platen position can be adjusted to maximize sanding performance with the various wood species and conditions.\u003c\/p\u003e\n\u003cp\u003eThe feed conveyor belt is specially designed to provide smooth, consistent material movement for ultra-smooth sanded surfaces. The conveyor belt is driven by a variable speed motor that can be set to any speed within the 15 - 49 fpm (feet per minute) range. Feed rate adjustments are made using a dial on the conveyor motor, allowing the operator to set the best speed for the job.\u003c\/p\u003e\n\u003cp\u003eThe WB-37 Wide Belt Sander is equipped with sophisticated thicknessing controls that make its operation fast, simple and virtually error free. It handles stock up to 6\" thick and as short as 12\" and the control systems make using that range easy. The digital read out and keypad eliminates mistakes and allows ultra precise settings.\u003c\/p\u003e\n\u003cp\u003eThis machine has three, 5\" diameter dust ports on the top that make connecting it to your dust system easy. A dust collection system with a minimum 1600 CFM is required. The exterior ports are connected to internal baffles that focus the collection power to keep the interior of the WB-37 Wide Belt Sander as clean as possible. That prolongs the life of the abrasive and keeps the machine running smoothly.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentralized controls allow you to access all the needed buttons on one simple panel\u003c\/li\u003e\n\u003cli\u003eDigital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece\u003c\/li\u003e\n\u003cli\u003eThe auto thicknesser will capture the piece of wood to give the user the exact starting thickness\u003c\/li\u003e\n\u003cli\u003eDisc brake slows the machine quickly and will activate immediately to stop machine in an emergency\u003c\/li\u003e\n\u003cli\u003eThe pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums, as well as use the sanding surface more uniformly without leaving sanding lines on the workpiece\u003c\/li\u003e\n\u003cli\u003eThe three motor system allows for maximum horsepower to independently power the sanding drums, the variable speed feed, and the feed table movement.\u003c\/li\u003e\n\u003cli\u003eThe variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan id=\"ctl00_ContentPlaceHolder1_LabelSpecificationsText\"\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAir Required 75:\u003c\/strong\u003e80\u003cbr\u003e\u003cstrong\u003eDust Collection Minimum CFM Required (CFM)\u003c\/strong\u003e: 1,600\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Motor Power (HP):\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eMax. Board Thickness:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eMax. Board Width:\u003c\/strong\u003e 37\"\u003cbr\u003e\u003cstrong\u003eMin. Board Length:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eMin. Board Thickness:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power (HP):\u003c\/strong\u003e 20\u003cbr\u003e\u003cstrong\u003eMotor Voltage (V.):\u003c\/strong\u003e 230\/460\u003cbr\u003e\u003cstrong\u003ePrewired Voltage (V.):\u003c\/strong\u003e 230\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size (Amps.):\u003c\/strong\u003e 70\/35\u003cbr\u003e\u003cstrong\u003eSanding Belt Speed (FPM):\u003c\/strong\u003e 2,625\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Wide Belt Sander\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 2 Sanding belts, 100 and 180 Grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":31353457410166,"sku":"PM9-1790837","price":25629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1790825-5_371eeba3-1ac7-413d-9db2-ac6a674ac397.jpg?v=1748888326"},{"product_id":"powermatic-25-wide-belt-sander-wb-25","title":"Powermatic 25\" Wide Belt Sander WB-25","description":"\u003cp\u003eThe Powermatic 25\" Wide Belt Sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience.\u003c\/p\u003e\n\u003cp\u003eThe variable speed feed belt allows the user to accurately dial in the exact feed speed to best suit each project and work environment. The sander also features a special digital readout control. This element is especially helpful because it will show the exact thickness of the finished piece or will allow the user to preset exactly what thickness they would prefer the finished piece to be.\u003c\/p\u003e\n\u003cp\u003eThe sander also includes a unique measuring device, the auto thicknesser, that will capture the piece of wood to give the user an exact measurement of the starting thickness. The Powermatic 25\" Wide Belt Sander has an air-eye system which controls the oscillation for the 25\" x 75\" sanding belt. This prevents the belt from running off the end of the drums and uses the sanding surface in a more uniform manner. This also ensures sanding lines will not be left on the work piece.\u003c\/p\u003e\n\u003cp\u003eThe WB-25 also has a powerful three motor system for maximum performance. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor, directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically and with ease. For safety, the WB-25 Sander has a disc brake, which slows the machine quickly and stops it instantly in the event of an emergency.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentralized controls allow you to access all the needed buttons on one simple panel\u003c\/li\u003e\n\u003cli\u003eDigital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece\u003c\/li\u003e\n\u003cli\u003eThe auto thicknesser will capture the piece of wood to give the user the exact starting thickness\u003c\/li\u003e\n\u003cli\u003eDisc brake slows the machine quickly and will activate immediately to stop machine in an emergency\u003c\/li\u003e\n\u003cli\u003eThe pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums, as well as use the sanding surface more uniformly without leaving sanding lines on the workpiece\u003c\/li\u003e\n\u003cli\u003eThe three motor system allows for maximum horsepower to independently power the sanding drums, the variable speed feed, and the feed table movement.\u003c\/li\u003e\n\u003cli\u003eThe variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAir Required 75: \u003c\/strong\u003e80\u003cbr\u003e\u003cstrong\u003eMin. Dust Collection Required:\u003c\/strong\u003e 800 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eFeed Motor Power:\u003c\/strong\u003e 1hp\u003cbr\u003e\u003cstrong\u003eMax. Board Thickness:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eMax. Board Width:\u003c\/strong\u003e 25\"\u003cbr\u003e\u003cstrong\u003eMin. Board Length:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eMin. Board Thickness:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMotor Phase:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 15hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230\/460V\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 50\/25 Amps\u003cbr\u003e\u003cstrong\u003eSanding Belt Speed:\u003c\/strong\u003e 2,625 FPM\u003cbr\u003e\u003cstrong\u003eStyle (Type):\u003c\/strong\u003e Wide Belt Sander\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 Sanding belts, 100 and 180 Grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":31353466978422,"sku":"PM9-1790825","price":20789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/1790825-5.jpg?v=1748888325"},{"product_id":"cantek-24-wide-belt-sander-60-belt-c251-3ph","title":"Cantek 10HP 3-Phase 24\" Wide Belt Sander - C251","description":"\u003cp\u003e\u003cspan\u003eThe Cantek C251 24″ Widebelt Sander is compact and versatile with a combination sanding unit for calibration and final sanding.  The robust sanding unit and heavy-duty frame ensure optimum sanding results.  Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 2-decimal places in Inch \u0026amp; 1-decimal in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance scheduling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn electronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality rubber conveyor belt with automatic belt tracking. The tracking system ensures the conveyor belt does not travel off to one side, causing damage. The C251 is equipped with a powerful 10HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes. Also equipped with dual infeed and dual outfeed hold-down rollers to firmly secure the panel during sanding operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels. On the electrical panel, high-quality Schneider electrical controls and Camozzi pneumatics are readily available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 3-3\/8” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 25” x 60” (635 x 1,524mm)\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e 0.5HP\u003cbr\u003e\u003cstrong\u003eMaximum width stock:\u003c\/strong\u003e 24” (609mm)\u003cbr\u003e\u003cstrong\u003eMinimum part length:\u003c\/strong\u003e 13” (330mm)\u003cbr\u003e\u003cstrong\u003eMaximum thickness opening:\u003c\/strong\u003e 4” (100mm)\u003cbr\u003e\u003cstrong\u003eFeed speed- variable:\u003c\/strong\u003e 13 to 52 FPM (4 to 16 m\/min)\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e 1 @ 4” (101mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e 2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,452 lbs. \u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 53” x 50” x 63” (1346 x 1,270 x 1,600mm)\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1,584 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 67\" x 55\" x 78\"\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 32.2 amps\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 575V, 3-Phase, 60 Hz = 12.7 amps\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966341951687,"sku":"C251 (3PH)","price":12810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/C251-1_2263801a-264c-476c-8e62-2f2a33179838.jpg?v=1680102744"},{"product_id":"cantek-24-wide-belt-sander-60-belt-c251-1ph","title":"Cantek 10HP 1-Phase 24\" Wide Belt Sander - C251","description":"\u003cp\u003e\u003cspan\u003eThe Cantek C251 24″ Widebelt Sander is compact and versatile with a combination sanding unit for calibration and final sanding.  The robust sanding unit and heavy-duty frame ensure optimum sanding results.  Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 2-decimal places in Inch \u0026amp; 1-decimal in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance scheduling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn electronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality rubber conveyor belt with automatic belt tracking. The tracking system ensures the conveyor belt does not travel off to one side, causing damage. The C251 is equipped with a powerful 10HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes. Also equipped with dual infeed and dual outfeed hold-down rollers to firmly secure the panel during sanding operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels. On the electrical panel, high-quality Schneider electrical controls and Camozzi pneumatics are readily available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 3-3\/8” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25” x 60” (635 x 1,524 mm)\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e\u003cspan\u003e 0.5HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum width stock:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e24” (609mm)\u003cbr\u003e\u003cstrong\u003eMinimum part length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13” (330mm)\u003cbr\u003e\u003cstrong\u003eMaximum thickness opening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4” (100mm)\u003cbr\u003e\u003cstrong\u003eFeed speed- variable:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13 to 52 FPM (4 to 16 m\/min)\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 @ 4” (101 mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eDust collection required:\u003c\/strong\u003e 515 CFM\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1,452 lbs. \u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e53” x 50” x 63” (1,346 x 1,270 x 1,600mm)\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1,584 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 67\" x 55\" x 78\" (1,701 x 1,397 x 1,981mm)\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 1-phase, 60 Hz = 57.5 amps\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966341984455,"sku":"C251 (1PH)","price":14070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/C251-1_2bd60a0c-6325-49fc-bc13-1021ad3ffdf2.jpg?v=1680102654"},{"product_id":"cantek-36-wide-belt-sander-60-belt-c371","title":"Cantek 20HP 3-Phase 36\" Wide Belt Sander - C371","description":"\u003cp\u003e\u003cspan\u003eThe Cantek C371 36″ Widebelt Sander is compact and versatile with a combination sanding unit for calibration and final sanding.  The robust sanding unit and heavy-duty frame ensure optimum sanding results.  Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSingle combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. The quick-release handle for belt changing and access to the removable platen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe sanding belt motor is equipped with a powerful 20HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes. The table is raised and lowered by four industrial ball screws ensuring perfect flatness and added durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe automatic conveyor belt tracking ensures the conveyor belt is centered and does not track off to one side, which could damage the belt. The electrical panel features high-quality Schneider electrical controls and readily available Camozzi pneumatics.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eFour table-raising jack screws\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37” x 60” (939 x 1,524 mm)\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 20HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e 0.5HP\u003cbr\u003e\u003cstrong\u003eMaximum width stock:\u003c\/strong\u003e 36” (910mm)\u003cbr\u003e\u003cstrong\u003eMinimum part length:\u003c\/strong\u003e 13” (330mm)\u003cbr\u003e\u003cstrong\u003eMinimum thickness opening:\u003c\/strong\u003e 5” (127mm)\u003cbr\u003e\u003cstrong\u003eFeed speed- variable:\u003c\/strong\u003e 13 to 52 FPM (4 to 16 m\/min)\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e 1 @ 5” (127mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e 2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eNew weight:\u003c\/strong\u003e 1,980 lbs. \u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 64” x 53” x 73” (1,625 x 1,346 x 1,854 mm)\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 2,530 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 67” x 55” x 78” (1,701 x 1,397 x 1,981 mm)\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 61 amps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KG_AlBT4dl0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966342639815,"sku":"C371 (3PH)","price":23625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/C371-1_0c600d23-4501-4273-8384-4113886fb9bb.jpg?v=1680102186"},{"product_id":"cantek-36-two-head-wide-belt-sander-60-belt-c372","title":"Cantek 20HP 3-Phase 36\" Two Head Wide Belt Sander - C372","description":"\u003cp\u003eThe Cantek C372 37″ Two Head Widebelt Sander is perfect for any small to mid-sized shops looking to achieve outstanding results. Its robust construction is the best in its class and provides superior sanding results.  The flexibility with quick change abrasive belts, allows for more applications in a shorter time frame, helping to assist and meet deadlines.\u003c\/p\u003e\n\u003cp\u003eThe C372 has a relatively small footprint providing greater access for smaller shops to accomplish bigger results.  Equipped with motorized thickness adjustment with digital input control with settings to 0.001” \/ 0.01mm for precise table setting without compromise!\u003c\/p\u003e\n\u003cp\u003eEquipped with 2 sanding heads: Contact Drum for calibration sanding, and Combination head with adjustable platen for both calibration \u0026amp; finish sanding. A quick-release handle \u0026amp; pneumatic belt tensioning to allow for fast belt changeover. Both sanding head frames are made from industrial cast iron.\u003c\/p\u003e\n\u003cp\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. It is also equipped with an emergency stop button, individual ammeters for load monitoring, and an hour meter to aid in maintenance.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/p\u003e\n\u003cp\u003eOutfitted with powerful 20HP 15HP sanding motors and a pneumatic disc braking system that facilitates faster belt changes with added machine safety. Equipped with an over-height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDual sanding heads increase efficiency by reducing the number of passes\u003c\/li\u003e\n\u003cli\u003eRubber contact drum for calibration sanding\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eAdjustable platen produces superior sanding results with finer sandpaper grits\u003c\/li\u003e\n\u003cli\u003eSolid cast iron sanding heads and mounting base for superior vibration damping resulting in an optimum sanding result\u003c\/li\u003e\n\u003cli\u003eEquipped with automatic conveyor belt tracking to ensure the conveyor belt is centered and does not track off to one side, which could damage the belt\u003c\/li\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eTable is raised and lowered by four industrial ball screws ensuring perfect flatness and added durability\u003c\/li\u003e\n\u003cli\u003eTwo sanding heads\n\u003cul\u003e\n\u003cli\u003eFirst Head: Rubber contact drum with 7” diameter drum\u003c\/li\u003e\n\u003cli\u003eSecond Head: Combination head with 5” diameter drum and 2” wide platen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eFour table-raising jack screws\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37” x 60” (940 x 1,524mm)\u003cbr\u003e\u003cstrong\u003eMain motor (First Head):\u003c\/strong\u003e 20HP\u003cbr\u003e\u003cstrong\u003eMain motor (Second Head):\u003c\/strong\u003e 15HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e 0.5HP\u003cbr\u003e\u003cstrong\u003eMax. width stock:\u003c\/strong\u003e 36” (914mm)\u003cbr\u003e\u003cstrong\u003eMin. part length: \u003c\/strong\u003e13\"\u003cbr\u003e\u003cstrong\u003eMin. thickness opening:  \u003c\/strong\u003e5\"\u003cbr\u003e\u003cstrong\u003eFeed speed: variable:\u003c\/strong\u003e 13 to 52 FPM\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e 4 @ 4” (100 mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e 2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eNew weight:\u003c\/strong\u003e 3,300 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 74” x 64” x 70” (1,879 x 1,625 x 1,778 mm)\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 5,390 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 78” x 67” x 76” (1,981 x 1,701 x 1,930 mm)\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 97.5 Amps\u003cbr\u003e\u003cstrong\u003eElectrical: \u003c\/strong\u003e575V, 3-Phase, 60 Hz = 45 Amps\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966342738119,"sku":"C372","price":29610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/C372-1_dc5efd13-61a3-4de7-b937-c2c292fa73d5.jpg?v=1680102036"},{"product_id":"cantek-44-wide-belt-sander-60-belt-c431","title":"Cantek 20HP 3-Phase 44\" Wide Belt Sander - C431","description":"\u003cp\u003e\u003cspan\u003eThe Cantek C431 43″ Widebelt Sander is compact and versatile with a combination sanding unit for calibration and final sanding.  The robust sanding unit and heavy-duty frame ensure optimum sanding results.  Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe C431 is equipped with a powerful 20HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes. It comes standard with a high-quality reinforced rubber conveyor belt which combines superior grip with high accuracy thickness. The conveyor belt is tracked automatically by a pneumatic tracking cylinder.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn extended infeed table with dual idle table rolls facilitate the workpiece's handling. It comes equipped with an overhead lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Additionally is equipped with a front safety push bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5” rubber contact drum and 2.6” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eFour table-raising jack screws\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 44” x 60” (1,117 x 1,524 mm)\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 20 HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e 0.5HP\u003cbr\u003e\u003cstrong\u003eMax. width stock:\u003c\/strong\u003e 43” (1,092mm)\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e 16” (400mm)\u003cbr\u003e\u003cstrong\u003eMax. thickness opening:\u003c\/strong\u003e 5.9” (150mm)\u003cbr\u003e\u003cstrong\u003eFeed speed- variable:\u003c\/strong\u003e 13 to 52 FPM (4 to 16 m\/min)\u003cbr\u003e\u003cstrong\u003eInfeed table:\u003c\/strong\u003e 11-1\/2” (292mm)\u003cbr\u003e\u003cstrong\u003eDust outlets:\u003c\/strong\u003e 2 @ 4.8” (100mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e 2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eNew weight:\u003c\/strong\u003e 3,344 lbs. (1,520 kgs)\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 70” x 72” x 71” (1,780 x 1,820 x 1,810mm)\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 3,960 lbs. (1,796 kgs)\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 66” x 77” x 83” (1,676 x 1,950 x 2,108 mm)\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 65 amps\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":40966343229639,"sku":"C431","price":27930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/C431-1_45d53a9c-e6b8-444c-9be8-c89bc099acea.jpg?v=1680103671"},{"product_id":"laguna-compact-25-wood-widebelt-sander","title":"Laguna Compact 25 Wood Widebelt Sander","description":"\u003cp\u003eLaguna’s Compact Widebelt Sander is perfect for the shop looking for an industrial quality sander at an affordable price. The Compact is impressive in its offerings: 60″ belt length with Automatic Pneumatic Oscillation, 2 feed speeds, industrial cast iron bed sitting on 4 Acme threaded screws with center alignment designed for precision results even when handling heavy material.\u003c\/p\u003e\n\u003cp\u003eThe bed is adjustable with an electronic motor and manual handle for micro movement. Industrial quality carpet offers the perfect balance between grip \u0026amp; rigid support. The platen is fully adjustable enabling you to run in combination with the 4″ rubber drum for optimum results.\u003c\/p\u003e\n\u003cp\u003eRaise it and use the drum alone to dimension wood. Lower it to sand sensitive material such as veneer without the risk of going through the material. Don’t let the price fool you, this is a serious piece of machinery!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" title=\"Laguna Warranty page\" rel=\"noopener\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Drum\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eVolt:\u003c\/strong\u003e 220, 1 phase, 60 Hz.\u003cbr\u003e\u003cstrong\u003eHP:\u003c\/strong\u003e 7.5 Main Motor\u003cbr\u003e\u003cstrong\u003eBed Adjustment\u003c\/strong\u003e: Electric, 0.33 HP Motor\u003cbr\u003e\u003cstrong\u003eMicro Adjust:\u003c\/strong\u003e Manual Handle\u003cbr\u003e\u003cstrong\u003eConveyor:\u003c\/strong\u003e 22 \u0026amp; 49 FPM. Gear Change, 1 HP\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eBed Height:\u003c\/strong\u003e 32″(Min) – 38″ (Max)\u003cbr\u003e\u003cstrong\u003eMax Capacity:\u003c\/strong\u003e 5.9″ (150mm)\u003cbr\u003e\u003cstrong\u003eMax Width Capacity:\u003c\/strong\u003e 24-3\/8″\u003cbr\u003e\u003cstrong\u003eBelt Size:\u003c\/strong\u003e 25″ x 60″\u003cbr\u003e\u003cstrong\u003eDrum:\u003c\/strong\u003e 4 x 26″ Rubber Roller\u003cbr\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Combo Head, Roller + Platen\u003cbr\u003e\u003cstrong\u003ePlaten:\u003c\/strong\u003e Felt \u0026amp; Graphite, Fully Adjustable With Scale\u003cbr\u003e\u003cstrong\u003eRPM:\u003c\/strong\u003e 1750 Drum\u003cbr\u003e\u003cstrong\u003eSafety Bar:\u003c\/strong\u003e Front off Bed, Stops Belt\u003cbr\u003e\u003cstrong\u003eOscillation:\u003c\/strong\u003e Pneumatic, Adjustable\u003cbr\u003e\u003cstrong\u003eAir Pressure:\u003c\/strong\u003e 75 psi\u003cbr\u003e\u003cstrong\u003eBrake:\u003c\/strong\u003e Main Motor, Air Disc\u003cbr\u003e\u003cstrong\u003eDust Port:\u003c\/strong\u003e 5″ x 2\u003cbr\u003e\u003cstrong\u003eFoot Print:\u003c\/strong\u003e 20″ x 40″\u003cbr\u003e\u003cstrong\u003eTotal Size (W x D):\u003c\/strong\u003e 40″ x 50″\u003cbr\u003e\u003cstrong\u003eHeight Included Dust Ports:\u003c\/strong\u003e 66-1\/4″\u003cbr\u003e\u003cstrong\u003eCSA:\u003c\/strong\u003e Fully Certified\u003cbr\u003e\u003cstrong\u003eWeight (Net\/Gross):\u003c\/strong\u003e 1,650\/1,920 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":42560925925593,"sku":"MSANWB25X60-1K-7.5-0197","price":14999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/compact25.1.jpg?v=1647015935"},{"product_id":"laguna-compact-37-widebelt-sander","title":"Laguna Compact 37 Widebelt Sander","description":"\u003cp\u003eThe Laguna Tools 37″ wide belt sander is a perfect fit for small woodworking shops. The belt length is 60″ which is the same length as several larger machines. The longer belt means it will not only last longer due to more abrasive material it will also run cooler.\u003c\/p\u003e\n\u003cp\u003eThis machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (10 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has two feed speeds 15″ and 49″ per minute.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\" title=\"Laguna Warranty page\" rel=\"noopener\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 10HP\u003cbr\u003e\u003cstrong\u003eFeed Motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eTable lifting motor:\u003c\/strong\u003e 0.25HP\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220V \/ 1phase\u003cbr\u003e\u003cstrong\u003eMax sanding height:\u003c\/strong\u003e 5-9\/10″\u003cbr\u003e\u003cstrong\u003eMin. sanding height:\u003c\/strong\u003e 1\/4″\u003cbr\u003e\u003cstrong\u003eMax Sanding Width:\u003c\/strong\u003e 36-1\/2″ (927 mm)\u003cbr\u003e\u003cstrong\u003eSanding Belt Size:\u003c\/strong\u003e 37″ x 60″ (940 x 1,524 mm)\u003cbr\u003e\u003cstrong\u003eAdjustable Sanding Platen:\u003c\/strong\u003e 3″ (77 mm)\u003cbr\u003e\u003cstrong\u003eDiameter of Sanding Drum:\u003c\/strong\u003e 4″ (101 mm)\u003cbr\u003e\u003cstrong\u003eLength of Sanding Drum:\u003c\/strong\u003e 37″ (965 mm)\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAdditional Specs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSanding Drum RPM:\u003c\/strong\u003e 1,725\u003cbr\u003e\u003cstrong\u003eConveyor Speed:\u003c\/strong\u003e Two Speeds 15′\/49′ per min\u003cbr\u003e\u003cstrong\u003eDust Port Size:\u003c\/strong\u003e 4″ (101mm)\u003cbr\u003e\u003cstrong\u003eNumber of Dust Ports:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eFootprint:\u003c\/strong\u003e 19″ x 51″ (483 x 1,300 mm)\u003cbr\u003e\u003cstrong\u003eWidth x Depth:\u003c\/strong\u003e 56-1\/2″ x 52″ (650 x 1320 mm)\u003cbr\u003e\u003cstrong\u003eHeight with Dust Collection Ports:\u003c\/strong\u003e 77-1\/2″ (1,968 mm)\u003cbr\u003e\u003cstrong\u003eHeight Without Dust Collection Ports:\u003c\/strong\u003e 71-2\/3″ (1,816mm)\u003cbr\u003e\u003cstrong\u003eConveyor Height At Lowest Setting:\u003c\/strong\u003e 32″ (813 mm)\u003cbr\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eOperating Air Pressure:\u003c\/strong\u003e 6 Bar\u003cbr\u003e\u003cstrong\u003eSanding Best Oscillation:\u003c\/strong\u003e Adjustable\u003cbr\u003e\u003cstrong\u003eSanding Belt Motor Brake:\u003c\/strong\u003e Yes. Air operated disc brake\u003cbr\u003e\u003cstrong\u003eCSA:\u003c\/strong\u003e Fully Certified\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,980 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":42561007943897,"sku":"MSANWB37X60-1K-10-0197","price":17999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/compact25.1_84739684-789c-4405-a625-8755d686f7fa.jpg?v=1647020948"},{"product_id":"laguna-wood-pro-37-widebelt-sander","title":"Laguna Wood Pro 37\" Widebelt Sander","description":"\u003cp\u003eThis machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has a variable speed conveyor of 12-60 FPM.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Drum\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMain Motor:\u003c\/strong\u003e 20HP 3 Phase\u003cbr\u003e\u003cstrong\u003eVariable Feed Motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eTable Lifting Motor:\u003c\/strong\u003e 0.25HP\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 37″\u003cbr\u003e\u003cstrong\u003eBelt Length:\u003c\/strong\u003e 75″\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMax Sanding Width:\u003c\/strong\u003e 36-½″ (927mm)\u003cbr\u003e\u003cstrong\u003eSanding Belt Size:\u003c\/strong\u003e 37″ x 75″ (940mm x 1905mm)\u003cbr\u003e\u003cstrong\u003eAdjustable Sanding Platen:\u003c\/strong\u003e 3″ (76mm)\u003cbr\u003e\u003cstrong\u003eDiameter of Sanding Drum:\u003c\/strong\u003e 4″ (101mm)\u003cbr\u003e\u003cstrong\u003eLength of Sanding Drum:\u003c\/strong\u003e 37″ (965mm)\u003cbr\u003e\u003cstrong\u003eSanding Drum RPM:\u003c\/strong\u003e 1725\u003cbr\u003e\u003cstrong\u003eVariable Conveyor Speed:\u003c\/strong\u003e 12 – 60 fpm\u003cbr\u003e\u003cstrong\u003eDust Port Size:\u003c\/strong\u003e 4″ (101mm)\u003cbr\u003e\u003cstrong\u003eNumber of Dust Ports:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eFootprint:\u003c\/strong\u003e 19″ x 51″ (483mm x 1300mm)\u003cbr\u003e\u003cstrong\u003eWidth x Depth:\u003c\/strong\u003e 56-½″ x 51″ (483mm x 1300mm)\u003cbr\u003e\u003cstrong\u003eHeight With Dust Collection Ports:\u003c\/strong\u003e 77-½″ (1968mm)\u003cbr\u003e\u003cstrong\u003eHeight Without Dust Collection Ports:\u003c\/strong\u003e 71-½″ (1816mm)\u003cbr\u003e\u003cstrong\u003eConveyor Height At Lowest Setting:\u003c\/strong\u003e 32″ (813mm)\u003cbr\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eOperating Air Pressure:\u003c\/strong\u003e 6 Bar\u003cbr\u003e\u003cstrong\u003eSanding Belt Oscillation:\u003c\/strong\u003e Adjustable\u003cbr\u003e\u003cstrong\u003eSanding Belt Motor Brake:\u003c\/strong\u003e Yes. Air Operated Disc Brake\u003cbr\u003e\u003cstrong\u003eCSA:\u003c\/strong\u003e Fully Certified\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1980 lbs\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":42561114570969,"sku":"MSANWB37X75-1K-20-0197","price":22999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/37.1.jpg?v=1647021487"},{"product_id":"laguna-wood-pro-43-wide-belt-sander","title":"Laguna Wood Pro 43\" Wide Belt Sander","description":"\u003cp\u003eThe Laguna Tools 43″ 2RK (Roller + Combo head) wide belt sander is a perfect fit for woodworking shops of all sizes. The belt length is 75″ which is the same length as several larger machines. The longer belt means it will not only last longer due to more abrasive material it will also run cooler.\u003c\/p\u003e\n\u003cp\u003eThis machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impact and do the dimensioning while the second roller (4”) with the Platen can have a finer grit. This will save time over having to run your production through the machine 2 times \u0026amp; change belt grit. Due to the large HP motor (25 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 2HP motor and the feed speed is adjustable from 12 to 60 fpm.\u003c\/p\u003e\n\u003cp\u003eYou can adjust the thickness in 4 ways:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eManual hand-wheel on the bottom of the machine.\u003c\/li\u003e\n\u003cli\u003eBy pressing the up or down arrow the table will move in the desired direction.\u003c\/li\u003e\n\u003cli\u003eInput a set dimension on the keypad and the machine will go to that dimension.\u003c\/li\u003e\n\u003cli\u003eThe auto thickness gauge will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAll Laguna Tools woodworking machinery carry a 2-year warranty. Must \u003ca rel=\"noopener\" title=\"Laguna Warranty page\" href=\"https:\/\/lagunatools.com\/policies\/warranty\/\" target=\"_blank\"\u003eregister\u003c\/a\u003e machine within 30 days of purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDouble Drum\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 25HP\u003cbr\u003e\u003cstrong\u003eVariable feed speed:\u003c\/strong\u003e 2HP\u003cbr\u003e\u003cstrong\u003eTable lifting motor:\u003c\/strong\u003e 0.25HP\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220, 3 Phase, 60 Hz.\u003cbr\u003e\u003cstrong\u003eProgrammable Logic Control\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAutomatic Thickness Control\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMax sanding height:\u003c\/strong\u003e 150mm\/5-9\/10″\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMin Sanding Height:\u003c\/strong\u003e ¼” (6.4mm)\u003cbr\u003e\u003cstrong\u003eMax Sanding Width:\u003c\/strong\u003e 43″ (1100mm)\u003cbr\u003e\u003cstrong\u003eSanding Belt Size:\u003c\/strong\u003e 43″ x 75″ (1100mm x 1905mm)\u003cbr\u003e\u003cstrong\u003eAdjustable Sanding Platen:\u003c\/strong\u003e 1¾” (45mm)\u003cbr\u003e\u003cstrong\u003eDiameter of Sanding Drum:\u003c\/strong\u003e 8″\u003cbr\u003e\u003cstrong\u003eLength of Sanding Drum:\u003c\/strong\u003e 43″\u003cbr\u003e\u003cstrong\u003eSanding Drum RPM:\u003c\/strong\u003e 1725 RPM\u003cbr\u003e\u003cstrong\u003eVariable Conveyor Speed:\u003c\/strong\u003e 12 – 60 fpm\u003cbr\u003e\u003cstrong\u003eDust Port Size:\u003c\/strong\u003e 4″ (101mm)\u003cbr\u003e\u003cstrong\u003eNumber of Ports:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eFootprint (L x W x H):\u003c\/strong\u003e 63″ x 65″ x 87″\u003cbr\u003e\u003cstrong\u003eConveyor Height At Lowest Setting:\u003c\/strong\u003e 32″ (813mm)\u003cbr\u003e\u003cstrong\u003eCabinet:\u003c\/strong\u003e Steel\u003cbr\u003e\u003cstrong\u003eOperating Air Pressure:\u003c\/strong\u003e 6 Bar\u003cbr\u003e\u003cstrong\u003eSanding Belt Oscillation:\u003c\/strong\u003e Pneumatic\/Adjustable\u003cbr\u003e\u003cstrong\u003eSanding Belt Motor Brake:\u003c\/strong\u003e Yes. Air Operated Disc Brake\u003cbr\u003e\u003cstrong\u003eCSA:\u003c\/strong\u003e Fully Certified\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 3630 lbs\u003cbr\u003e\u003cstrong\u003eShip Weight:\u003c\/strong\u003e 4200 lbs\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":42561131938009,"sku":"MSANWB43X75-2RK-25-0197","price":41999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/37.1_b523c34e-8030-4ede-999e-eaf3bad8d455.jpg?v=1647027355"},{"product_id":"cantek-s251-3ph-24-wide-belt-sander-60-belt","title":"Cantek 10HP 3-Phase 24\" Wide Belt Sander - S251","description":"\u003cp\u003eThe Cantek S251 24″ Wide Belt Sander is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensure optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/p\u003e\n\u003cp\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/p\u003e\n\u003cp\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 2-decimal places in Inch \u0026amp; 1-decimal in MM. Also, emergency stop button, ammeter for load monitoring. High-quality rubber conveyor belt with automatic belt tracking. The tracking system ensures the conveyor belt does not travel off to one side, causing damage.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/p\u003e\n\u003cp\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003eIf you need a quote, we would be happy to provide one. Call 260-637-0054 or email sales@oaktreesupplies.com\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness, and table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 3-3\/8\" rubber contact drum and 2\" wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eEquipped with a powerful 10HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on the main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eInterlocks are located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 25\" x 60\"\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 24\"\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e 13\"\u003cbr\u003e\u003cstrong\u003eMax. thickness opening:\u003c\/strong\u003e 5.9\"\u003cbr\u003e\u003cstrong\u003eFeed speed variable:\u003c\/strong\u003e 15 to 49 FPM\u003cbr\u003e\u003cstrong\u003eDust outlets:\u003c\/strong\u003e 2 @ 5\"\u003cbr\u003e\u003cstrong\u003eCompressed air pressure:\u003c\/strong\u003e 57-72 PSI\u003cbr\u003e\u003cstrong\u003eDust collection requirements:\u003c\/strong\u003e 1,200 CFM\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,344 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 50\" x 40\" x 66\"\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1,565 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 52\" x 45\" x 76\"\u003cbr\u003e\u003cstrong\u003eElectrical requirements:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 31.5 amps\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":43882077847769,"sku":"S251 (3PH)","price":15540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/S251-1.jpg?v=1682352486"},{"product_id":"cantek-s251-1ph-24-wide-belt-sander-60-belt","title":"Cantek 10HP 1-Phase 24\" Wide Belt Sander - S251","description":"\u003cp\u003eThe Cantek S251 24″ Wide Belt Sander is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensure optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/p\u003e\n\u003cp\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/p\u003e\n\u003cp\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 2-decimal places in Inch \u0026amp; 1-decimal in MM. Also, emergency stop button, ammeter for load monitoring. High-quality rubber conveyor belt with automatic belt tracking. The tracking system ensures the conveyor belt does not travel off to one side, causing damage.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/p\u003e\n\u003cp\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness, and table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 3-3\/8\" rubber contact drum and 2\" wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eEquipped with a powerful 10HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on the main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eInterlocks are located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 25\" x 60\"\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 1-phase\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 24\"\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e 13\"\u003cbr\u003e\u003cstrong\u003eMax. thickness opening:\u003c\/strong\u003e 5.9\"\u003cbr\u003e\u003cstrong\u003eFeed speed variable:\u003c\/strong\u003e 15 to 49 FPM\u003cbr\u003e\u003cstrong\u003eDust outlets:\u003c\/strong\u003e 2 @ 5\"\u003cbr\u003e\u003cstrong\u003eCompressed air pressure:\u003c\/strong\u003e 57-72 PSI\u003cbr\u003e\u003cstrong\u003eDust collection requirements:\u003c\/strong\u003e 1,200 CFM\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,344 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 50\" x 40\" x 66\"\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1,565 lbs.\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 52\" x 45\" x 76\"\u003cbr\u003e\u003cstrong\u003eElectrical requirements:\u003c\/strong\u003e 230V, 1-Phase, 60 Hz = 56 amps\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":43882111762649,"sku":"S251 (1PH)","price":15540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/S251-1_16fa79f6-5834-40ff-b954-32ec3060bd98.jpg?v=1682352613"},{"product_id":"cantek-s371-3ph-36-wide-belt-sander-60-belt","title":"Cantek 15HP 3-Phase 36\" Wide Belt Sander - S371","description":"\u003cp\u003eThe Cantek S371 36″ Wide Belt Sander is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensure optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/p\u003e\n\u003cp\u003eSingle combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/p\u003e\n\u003cp\u003eThe control panel is centrally located for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is equipped with belt overrun limit switches for added safety. Also equipped with a powerful 15HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes.\u003c\/p\u003e\n\u003cp\u003eThe S371 features an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003eIf you need a quote, we would be happy to provide one. Call 260-637-0054 or email sales@oaktreesupplies.com\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness, and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5\" rubber contact drum and 2\" wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on the main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eTable raising jackscrews\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the machine's actual running time, which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks are located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37\" x 60\"\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 15HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 36\"\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e 12.5\"\u003cbr\u003e\u003cstrong\u003eMax. thickness opening:\u003c\/strong\u003e 15 to 49 FPM\u003cbr\u003e\u003cstrong\u003eDust outlets:\u003c\/strong\u003e 3 @ 5\"\u003cbr\u003e\u003cstrong\u003eCompressed air pressure:\u003c\/strong\u003e 60 PSI\u003cbr\u003e\u003cstrong\u003eDust collection requirements:\u003c\/strong\u003e 1,800 CFM\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,609 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 51\" x 53\" x 67\"\u003cbr\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 52\" x 57\" x 76\"\u003cbr\u003e\u003cstrong\u003eElectrical requirements:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz = 47 amps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/KG_AlBT4dl0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":43882133487833,"sku":"S371 (3PH)","price":20685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/S371-1.jpg?v=1682358442"},{"product_id":"cantek-10hp-1-phase-36-wide-belt-sander-s371","title":"Cantek 10HP 1-Phase 36\" Wide Belt Sander - S371","description":"\u003cp\u003eThe Cantek S371 36″ Wide Belt Sander is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensure optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/p\u003e\n\u003cp\u003eSingle combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/p\u003e\n\u003cp\u003eThe control panel is centrally located for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is equipped with belt overrun limit switches for added safety. Also equipped with a powerful 15HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes.\u003c\/p\u003e\n\u003cp\u003eThe S371 features an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness, and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5\" rubber contact drum and 2\" wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on the main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eTable raising jackscrews\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the machine's actual running time, which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks are located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37\" x 60\"\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1HP\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 36\"\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e 12.5\"\u003cbr\u003e\u003cstrong\u003eFeed speed variable:\u003c\/strong\u003e 15 to 49 FPM\u003cbr\u003e\u003cstrong\u003ePass line height:\u003c\/strong\u003e 37\"\u003cbr\u003e\u003cstrong\u003eDust outlets:\u003c\/strong\u003e 3 @ 5\"\u003cbr\u003e\u003cstrong\u003eCompressed air pressure:\u003c\/strong\u003e 60 PSI\u003cbr\u003e\u003cstrong\u003eDust collection requirements:\u003c\/strong\u003e 1,800 CFM\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,609 lbs.\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e 50\" x 52\" x 66\"\u003cbr\u003e\u003cstrong\u003eElectrical requirements:\u003c\/strong\u003e 230V, 1-Phase, 60 Hz = 58 amps\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/KG_AlBT4dl0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":43882211344601,"sku":"S371 (1PH)","price":20685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/S371-1_f05042d8-d1a8-4f0d-a1f4-c7f35c15b16e.jpg?v=1682358585"},{"product_id":"cantek-s372-3ph-36-two-head-wide-belt-sander-60-belt","title":"Cantek 20HP 3-Phase 36\" Two Head Wide Belt Sander - S372","description":"\u003cp\u003eThe Cantek S372 37″ Two Head Wide Belt Sander is perfect for any small to mid-sized shop looking to achieve outstanding results. Its robust construction is the best in its class and provides superior sanding results.\u003c\/p\u003e\n\u003cp\u003eThe flexibility with quick-change abrasive belts allows for more applications in a shorter time frame, helping to assist and meet deadlines. In addition, the S372 has a relatively small footprint providing greater access for smaller shops to accomplish bigger results. Equipped with motorized thickness adjustment with digital input control with settings to 0.001\" \/ 0.01mm for precise table setting without compromise.\u003c\/p\u003e\n\u003cp\u003eEquipped with 2 sanding heads: a Contact Drum for calibration sanding, and a Combination head with adjustable platen for both calibration \u0026amp; finish sanding. A quick-release handle \u0026amp; pneumatic belt tensioning to allow for fast belt changeover. Both sanding head frames are made from industrial cast iron.\u003c\/p\u003e\n\u003cp\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 3-decimal places in Inch \u0026amp; 2-decimals in MM. It is also equipped with an emergency stop button, and individual ammeters for load monitoring.\u003c\/p\u003e\n\u003cp\u003eThe automatic conveyor belt tracking ensures the conveyor belt is centered and does not track off to one side, which could damage the belt. This machine is outfitted with a powerful 20HP motor and a pneumatic disc braking system that facilitates faster belt changes with added machine safety.\u003c\/p\u003e\n\u003cp\u003eElectronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/p\u003e\n\u003cp\u003eEquipped with an over-height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on front and rear of the machine, and safety switches on all door panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDual sanding heads increase efficiency by reducing the number of passes\u003c\/li\u003e\n\u003cli\u003eRubber contact drum for calibration sanding\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 5\" rubber contact drum and 2\" wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eAdjustable platen produces superior sanding results with finer sandpaper grits\u003c\/li\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness, and table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eTwo sanding heads:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eFirst Head: Rubber contact drum with 7\" diameter drum\u003c\/li\u003e\n\u003cli\u003eSecond Head: Combination head with 5\" diameter drum and 2\" wide platen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on the main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eTable raising jackscrews\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eInterlocks are located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e\u003cspan\u003e 37\" x 60\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e\u003cspan\u003e 20HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e\u003cspan\u003e 1HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e\u003cspan\u003e 36\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. part length:\u003c\/strong\u003e\u003cspan\u003e 12.5\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. thickness opening:\u003c\/strong\u003e\u003cspan\u003e 5.9\"\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFeed speed variable:\u003c\/strong\u003e 15 to 49 FPM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e\u003cspan\u003e 6 @ 5\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCompressed air pressure:\u003c\/strong\u003e\u003cspan\u003e 60 PSI\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust collection requirements:\u003c\/strong\u003e\u003cspan\u003e 3,600 CFM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e\u003cspan\u003e 3,086 lbs.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e\u003cspan\u003e 60\" x 54\" x 68\"\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eShipping dimensions:\u003c\/strong\u003e 62\" x 57\" x 78\"\u003cbr\u003e\u003cstrong\u003eElectrical requirements:\u003c\/strong\u003e\u003cspan\u003e 230V, 3-phase, 60 Hz = 60 amps\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":43882240639193,"sku":"S372 (3PH)","price":27195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/S372-1.jpg?v=1682360888"},{"product_id":"cantek-c251-8-1ph-24-wide-belt-sander-w-8-max-thickness-60-belt","title":"Cantek 10HP 3-Phase 24\" Wide Belt Sander - C251-8","description":"\u003cp\u003e\u003cspan\u003eThe Cantek C251-8 24″ Widebelt Sander is compact and versatile with a combination sanding unit for calibration and final sanding.  The robust sanding unit and heavy-duty frame ensure optimum sanding results.  Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe single combination head allows the operator full control of sanding operations for calibrating off of the rubber drum \u0026amp; finish sanding by lowering the platen through an eccentric lever. Quick-release handle for belt changing and access to the removable platen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCentrally located control panel for convenient operator access. Includes digital motorized thickness adjustment to 2-decimal places in Inch \u0026amp; 1-decimal in MM. Also, emergency stop button, ammeter for load monitoring, and hour meter to aid in maintenance scheduling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn electronic send \u0026amp; receive sensor precisely detects the sanding belt for the most reliable belt tracking. The machine is also equipped with belt overrun limit switches for added safety. Variable feed speed allows the operator to choose the correct sanding speed for various sanding applications, belt grits, wood species, and desired results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-quality rubber conveyor belt with automatic belt tracking. The tracking system ensures the conveyor belt does not travel off to one side, causing damage. The C251 is equipped with a powerful 10HP sanding motor and a pneumatic disc braking system to facilitate faster belt changes. Also equipped with dual infeed and dual outfeed hold-down rollers to firmly secure the panel during sanding operations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEquipped with an over height lever gate that will automatically shut off the machine should a workpiece too thick be sent through for sanding. Also equipped with a front safety bar, emergency stop buttons on the front and rear of the machine, and safety switches on all door panels. On the electrical panel, high-quality Schneider electrical controls and Camozzi pneumatics are readily available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNote:\u003c\/span\u003e Cannot ship to Indiana, Ohio, Pennsylvania or California.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAccurate digital thickness control with both Inch \u0026amp; Metric settings allows the operator to key in the desired thickness and the table will automatically move into position\u003c\/li\u003e\n\u003cli\u003eSmall footprint\u003c\/li\u003e\n\u003cli\u003eCombination sanding unit with 3-3\/8” rubber contact drum and 2” wide adjustable sanding platen for a wide range of sanding applications\u003c\/li\u003e\n\u003cli\u003eElectronic belt tracking for optimum belt life and sanding results\u003c\/li\u003e\n\u003cli\u003eAmmeter for load monitoring to ensure the proper amount of material is being removed according to the selected grit\u003c\/li\u003e\n\u003cli\u003eDisc brake on main motor allows for faster belt changes\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with quick-release outboard support to facilitate fast belt changes\u003c\/li\u003e\n\u003cli\u003eDouble infeed and outfeed pressure rolls for superior part hold down\u003c\/li\u003e\n\u003cli\u003eMaterial over-height limit switch\u003c\/li\u003e\n\u003cli\u003eHour meter records the actual running time of the machine which can be used to provide timely maintenance for the machine\u003c\/li\u003e\n\u003cli\u003eInterlocks located on all access doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25” x 60” (635 x 1,524 mm)\u003cbr\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10HP\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1HP\u003cbr\u003e\u003cstrong\u003eTable rise\/fall motor:\u003c\/strong\u003e\u003cspan\u003e 05HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum width stock:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e24” (609mm)\u003cbr\u003e\u003cstrong\u003eMinimum part length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13” (330mm)\u003cbr\u003e\u003cstrong\u003eMaximum thickness opening:\u003c\/strong\u003e\u003cspan\u003e 8\u003c\/span\u003e” (200mm)\u003cbr\u003e\u003cstrong\u003eFeed speed- variable:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13 to 52 FPM (4 to 16 m\/min)\u003cbr\u003e\u003cstrong\u003ePassline height:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e33” – 38” (838 – 965mm)\u003cbr\u003e\u003cstrong\u003eInfeed table:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e11-1\/2” (292mm)\u003cbr\u003e\u003cstrong\u003eDust outlet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 @ 4” (101mm)\u003cbr\u003e\u003cstrong\u003eCompressed air usage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 CFM @ 90 PSI\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1,540 lbs. \u003cbr\u003e\u003cstrong\u003eMachine dimensions:\u003c\/strong\u003e\u003cspan\u003e 67\" x 55\" x 82.3\" (1,701 x 1,397 x 2,090mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1,760 lbs.\u003cbr\u003e\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230V, 3-Phase, 60 Hz\u003cbr\u003e\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 28.2\u003c\/p\u003e\n\u003ch5\u003e*Shipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Cantek","offers":[{"title":"Default Title","offer_id":44356259315929,"sku":"C251-8 (3PH)","price":13755.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/C251-1_3ec102fd-4b22-4b66-a903-0ba67d48ebf2.jpg?v=1701969572"},{"product_id":"scm-dmc-sd-10-cs-95-37-single-head-wide-belt-sander","title":"SCM DMC SD 10 CS 95 37\" Single Head Wide Belt Sander","description":"\u003cp\u003eThe DMC SD 10 is SCM's most compact DMC Wide Belt Sander, making it ideal for small production shops. This sander can process workpieces up to 37\" wide. With features like automatic thickness detection, a traction surface belt, and a sturdy steel main frame, the DMC SD 10 will optimize your workspace.\u003c\/p\u003e\n\u003cp\u003eThis wide belt sander features one sanding head and a combination drum. This duo allows for aggressive stock removal with smooth feeding. The DMC SD 10 comes with two platens: rigid and soft. The rigid platen is ideal for heavier stock removal, while the soft platen provides lighter finishing passes for finer surface quality (excellent for veneer and delicate surfaces).\u003c\/p\u003e\n\u003cp\u003eThe DMC SD 10 can automatically detect the thickness of a workpiece and adjust the table height accordingly. This feature is particularly useful in furniture, door, and millwork production form consistent and precise results. This system also features a dial for decimal adjustment, giving you the option to manually set stock removal.\u003c\/p\u003e\n\u003cp\u003eWorkpiece feeding on the DMC SD 10 is stable and secure. Along with an idle infeed roller, this machine also features a diamond-shaped belt. The special geometry of this diamond-shaped profile provides the best traction surface to prevent the workpiece from slipping during feeding. The outfeed roller provides the perfect amount of pressure, especially for short and narrow workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/uneeda-37-x-60-rkxo-aluminum-oxide-cloth-backed-wide-belts\" title='Uneeda RKXO Aluminum Oxide Cloth Backed Wide Belts 37\" x 60\" product page' rel=\"noopener\" target=\"_blank\"\u003eCompatible sanding belts \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation \u0026amp; Training\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eInstallation will be performed by an SCM factory-trained service technician or certified dealer technician. Installation is defined as assembling the machine to its \"ready-to-run\" state; it does not include floor\/masonry work or running electrical, pneumatic, or dust extraction services. Training will be conducted on site by the technician after installation is completed.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-coated pressing rollers before and after sanding head for even feeding\u003c\/li\u003e\n\u003cli\u003eAdditional hold-down plate before sanding head\u003c\/li\u003e\n\u003cli\u003eElectronic digital thickness readout clearly displays the current work table position for precise thickness control\u003c\/li\u003e\n\u003cli\u003eAutomatic table thickness detection\u003c\/li\u003e\n\u003cli\u003eElectronic table positioning allows quick, accurate height adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy-duty powered table lift uses four motors and rigid lifting columns secured at both the top and bottom for exceptional stability and parallelism\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with a center fulcrum automatically compensates for abrasive belt taper, ensuring consistent tracking and sanding pressure\u003c\/li\u003e\n\u003cli\u003eNatural rubber vacuum table with diamond-shaped belt provides the best traction\u003c\/li\u003e\n\u003cli\u003e50 shore, negative profile (waffle-style) rubber feed mat\u003c\/li\u003e\n\u003cli\u003eFront and rear emergency stop buttons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 18hp\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e .7hp\u003cbr\u003e\u003cstrong\u003eFeed speeds:\u003c\/strong\u003e 15 or 30 FPM\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 37” (950mm)\u003cbr\u003e\u003cstrong\u003eDrum size:\u003c\/strong\u003e 4.75\" (120mm)\u003cbr\u003e\u003cstrong\u003eMax. workpiece thickness:\u003c\/strong\u003e 6-1\/4\" (160mm)\u003cbr\u003e\u003cstrong\u003eMin. workpiece length:\u003c\/strong\u003e 12.5\" (317.5mm)\u003cbr\u003e\u003cstrong\u003eAbrasive belt length:\u003c\/strong\u003e 60\"\u003cbr\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37\" x 60\"\u003cbr\u003e\u003cstrong\u003ePlaten size:\u003c\/strong\u003e 2\" (50mm)\u003cbr\u003e\u003cstrong\u003eDust outlet size:\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eMin. dust extraction:\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 56.3\" x 45.3\" x 70.8\"\u003cbr\u003e\u003cstrong\u003eGross weight:\u003c\/strong\u003e 1,526 lbs.\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 230V, 3-phase, 54 A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45864285438169,"sku":"R000801","price":23460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/SD10-1.jpg?v=1770069520"},{"product_id":"scm-dmc-sd-30-rcs-95-37-two-head-wide-belt-sander","title":"SCM DMC SD 30 RCS 95 37\" Two Head Wide Belt Sander","description":"\u003cp\u003eDesigned for small- to medium-sized woodworking shops, the DMC SD 30 RCS 95 Wide Belt Sander is well suited for calibrating and sanding solid wood, as well as veneered panels. This sander can process workpieces up to 37\" wide. It also handles a wide range of general sanding tasks with consistent, reliable results. The steel drum and combination sanding head provide an extremely smooth and high-quality finish on workpieces.\u003c\/p\u003e\n\u003cp\u003eThe rigid steel drum and the versatile combination sanding head working together give this wide belt sander the flexibility to handle a wide range of sanding tasks with confidence. The steel drum provides the firm, consistent pressure needed for accurate thickness calibration and efficient material removal, even on wood with uneven grain. The combination head refines the surface for a smoother, more uniform finish.\u003c\/p\u003e\n\u003cp\u003eThe DMC SD 30 can automatically detect the thickness of a workpiece and adjust the table height accordingly. This feature is particularly useful in furniture, door, and millwork production form consistent and precise results. This system also features a dial for decimal adjustment, giving you the option to manually set stock removal.\u003c\/p\u003e\n\u003cp\u003eThe \"RCS\" version of this sander features higher flexibility for a top-quality finish in a single pass. Operators can move from controlled stock removal to fine finishing without resetting the workpiece! It’s well suited to the full range of everyday sanding needs in woodworking and veneering shops, from solid wood to veneered panels.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/uneeda-37-x-75-rkxo-aluminum-oxide-cloth-backed-wide-belts\" title='Uneeda RKXO Aluminum Oxide Cloth-Backed Wide Sanding Belts 37\" x 75\" product page' rel=\"noopener\" target=\"_blank\"\u003eCompatible sanding belts \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation \u0026amp; Training\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eInstallation will be performed by an SCM factory-trained service technician or certified dealer technician. Installation is defined as assembling the machine to its \"ready-to-run\" state; it does not include floor\/masonry work or running electrical, pneumatic, or dust extraction services. Training will be conducted on site by the technician after installation is completed.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-coated pressing rollers before and after sanding head for even feeding\u003c\/li\u003e\n\u003cli\u003e1HP feed unit inverter motor\u003c\/li\u003e\n\u003cli\u003e\"TES\" elastic pad adapts to irregular surfaces, great for veneered panels even when they are not perfectly flat\u003c\/li\u003e\n\u003cli\u003eTimed belt-cleaning blower activates electronically and keeps the abrasive clean without wasting compressed air\u003c\/li\u003e\n\u003cli\u003eFlexible, steel hold-down and anti-kickback plate on infeed table\u003c\/li\u003e\n\u003cli\u003eControl panel allows operator to select desired working unit(s)\u003c\/li\u003e\n\u003cli\u003eLED panel introduction indicator clearly shows the operator where and when to feed the panel, helping optimize abrasive belt wear\u003c\/li\u003e\n\u003cli\u003eAutomatic table thickness detection\u003c\/li\u003e\n\u003cli\u003eBelt oscillation system ensures uniformity and reduces risk of breakage\u003c\/li\u003e\n\u003cli\u003eElectronic table positioning allows quick, accurate height adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy-duty powered table lift uses four motors and rigid lifting columns secured at both the top and bottom for exceptional stability and parallelism\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with a center fulcrum automatically compensates for abrasive belt taper, ensuring consistent tracking and sanding pressure\u003c\/li\u003e\n\u003cli\u003eInfeed and outfeed roller tables\u003c\/li\u003e\n\u003cli\u003eNatural rubber vacuum table with diamond-shaped belt provides the best traction\u003c\/li\u003e\n\u003cli\u003e50 shore, negative profile (waffle-style) rubber feed mat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOGIC 50 K Electronic Programmer for timing\/anti-dubbing the pad\u003c\/li\u003e\n\u003cli\u003eFront and rear emergency stop buttons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 30hp\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1hp Inverter\u003cbr\u003e\u003cstrong\u003eFeed speeds:\u003c\/strong\u003e 15 or 30 FPM\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 37” (950mm)\u003cbr\u003e\u003cstrong\u003eDrum size:\u003c\/strong\u003e 4.75\" (120mm)\u003cbr\u003e\u003cstrong\u003eMax. workpiece thickness:\u003c\/strong\u003e 6.69\" (170mm)\u003cbr\u003e\u003cstrong\u003eMin. workpiece length:\u003c\/strong\u003e 12.5\" (317.5mm)\u003cbr\u003e\u003cstrong\u003eAbrasive belt length:\u003c\/strong\u003e 75\"\u003cbr\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 37\" x 75\"\u003cbr\u003e\u003cstrong\u003ePlaten size:\u003c\/strong\u003e 2\" (50mm)\u003cbr\u003e\u003cstrong\u003eDust outlet size (x2):\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eMin. dust extraction:\u003c\/strong\u003e 1,800 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 65.4\" x 74\" x 84.6\"\u003cbr\u003e\u003cstrong\u003eGross weight:\u003c\/strong\u003e 2,619 lbs.\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 230V, 3-phase, 80 A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45864311488729,"sku":"R000401","price":38290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/DMC3095-1.jpg?v=1770225648"},{"product_id":"scm-dmc-sd-30-cs-110-43-single-head-wide-belt-sander","title":"SCM DMC SD 30 CS 110 43\" Single Head Wide Belt Sander","description":"\u003cp\u003eDesigned for small- to medium-sized woodworking shops, the DMC SD 30 CS 110 Wide Belt Sander is well suited for calibrating and sanding solid wood, as well as veneered panels. This sander can process workpieces up to 43\" wide. With features like automatic thickness detection, a traction surface belt, and a sturdy steel main frame, the DMC SD 30 will optimize your workspace.\u003c\/p\u003e\n\u003cp\u003eThe DMC SD 30 can automatically detect the thickness of a workpiece and adjust the table height accordingly. This feature is particularly useful in furniture, door, and millwork production form consistent and precise results. This system also features a dial for decimal adjustment, giving you the option to manually set stock removal.\u003c\/p\u003e\n\u003cp\u003eWorkpiece feeding on the DMC SD 30 is stable and secure. Along with an idle infeed roller, this machine also features a diamond-shaped belt. The special geometry of this diamond-shaped profile provides the best traction surface to prevent the workpiece from slipping during feeding. The outfeed roller provides the perfect amount of pressure, especially for short and narrow workpieces.\u003c\/p\u003e\n\u003cp\u003eThe \"CS\" combined unit is the key to the flexibility of the DMC SD 30. The ability to use the sanding roller and pad either independently or together allows the machine to deliver consistently high-quality results across a wide range of applications.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/uneeda-43-x-75-rkxo-aluminum-oxide-cloth-backed-wide-belts\" title='Uneeda RKXO Aluminum Oxide Cloth-Backed Wide Sanding Belts 43\" x 75\" product page' rel=\"noopener\" target=\"_blank\"\u003eCompatible sanding belts \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation \u0026amp; Training\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eInstallation will be performed by an SCM factory-trained service technician or certified dealer technician. Installation is defined as assembling the machine to its \"ready-to-run\" state; it does not include floor\/masonry work or running electrical, pneumatic, or dust extraction services. Training will be conducted on site by the technician after installation is completed.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRubber-coated pressing rollers before and after sanding head for even feeding\u003c\/li\u003e\n\u003cli\u003e1HP feed unit inverter motor\u003c\/li\u003e\n\u003cli\u003eFlexible, steel hold-down and anti-kickback plate on infeed table\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl panel allows operator to select desired working unit(s)\u003c\/li\u003e\n\u003cli\u003eLED panel introduction indicator clearly shows the operator where and when to feed the panel, helping optimize abrasive belt wear\u003c\/li\u003e\n\u003cli\u003eAutomatic table thickness detection\u003c\/li\u003e\n\u003cli\u003eBelt oscillation system ensures uniformity and reduces risk of breakage\u003c\/li\u003e\n\u003cli\u003eElectronic table positioning allows quick, accurate height adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy-duty powered table lift uses four motors and rigid lifting columns secured at both the top and bottom for exceptional stability and parallelism\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with a center fulcrum automatically compensates for abrasive belt taper, ensuring consistent tracking and sanding pressure\u003c\/li\u003e\n\u003cli\u003eInfeed and outfeed roller tables\u003c\/li\u003e\n\u003cli\u003eNatural rubber vacuum table with diamond-shaped belt provides the best traction\u003c\/li\u003e\n\u003cli\u003e50 shore, negative profile (waffle-style) rubber feed mat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOGIC 50 K Electronic Programmer for timing\/anti-dubbing the pad\u003c\/li\u003e\n\u003cli\u003eFront and rear emergency stop buttons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 24hp\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1hp\u003cbr\u003e\u003cstrong\u003eFeed speeds:\u003c\/strong\u003e 15 or 30 FPM\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 43” (1,100mm)\u003cbr\u003e\u003cstrong\u003eDrum size:\u003c\/strong\u003e 4.75\" (120mm)\u003cbr\u003e\u003cstrong\u003eMax. workpiece thickness:\u003c\/strong\u003e 6.69\" (170mm)\u003cbr\u003e\u003cstrong\u003eMin. workpiece length:\u003c\/strong\u003e 12.5\" (317.5mm)\u003cbr\u003e\u003cstrong\u003eAbrasive belt length:\u003c\/strong\u003e 75\"\u003cbr\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 43\" x 75\"\u003cbr\u003e\u003cstrong\u003ePlaten size:\u003c\/strong\u003e 2\" (50mm)\u003cbr\u003e\u003cstrong\u003eDust outlet size:\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eMin. dust extraction:\u003c\/strong\u003e 900 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 65.4\" x 74\" x 84.6\"\u003cbr\u003e\u003cstrong\u003eGross weight:\u003c\/strong\u003e 2,707 lbs.\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 230V, 3-phase, 87 A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45864313389273,"sku":"R000201","price":34640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/DMC3095-1_1e571e4f-982c-4295-90ac-0b4e4b870ab3.jpg?v=1770230389"},{"product_id":"scm-dmc-sd-30-rcs-43-two-head-wide-belt-sander","title":"SCM DMC SD 30 RCS 110 43\" Two Head Wide Belt Sander","description":"\u003cp\u003eDesigned for small- to medium-sized woodworking shops, the DMC SD 30 RCS 110 Wide Belt Sander is well suited for calibrating and sanding solid wood, as well as veneered panels. This sander can process workpieces up to 43\" wide. It also handles a wide range of general sanding tasks with consistent, reliable results. The steel drum and combination sanding head provide an extremely smooth and high-quality finish on workpieces.\u003c\/p\u003e\n\u003cp\u003eThe rigid steel drum and the versatile combination sanding head working together give this wide belt sander the flexibility to handle a wide range of sanding tasks with confidence. The steel drum provides the firm, consistent pressure needed for accurate thickness calibration and efficient material removal, even on wood with uneven grain. The combination head refines the surface for a smoother, more uniform finish.\u003c\/p\u003e\n\u003cp\u003eThe DMC SD 30 can automatically detect the thickness of a workpiece and adjust the table height accordingly. This feature is particularly useful in furniture, door, and millwork production form consistent and precise results. This system also features a dial for decimal adjustment, giving you the option to manually set stock removal.\u003c\/p\u003e\n\u003cp\u003e\"RCS\" versions of this sander with 43\" working widths feature electronic sectional sanding pad capabilities, allowing safe and precise sanding of honeycomb-core veneered panels. Designed for greater flexibility and productivity, this machine delivers high-quality finishing in a single pass. It’s well suited to the full range of everyday sanding needs in woodworking and veneering shops, from solid wood to veneered panels.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/uneeda-43-x-75-rkxo-aluminum-oxide-cloth-backed-wide-belts\" title='Uneeda RKXO Aluminum Oxide Cloth-Backed Wide Sanding Belts 43\" x 75\" product page' rel=\"noopener\" target=\"_blank\"\u003eCompatible sanding belts \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation \u0026amp; Training\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eInstallation will be performed by an SCM factory-trained service technician or certified dealer technician. Installation is defined as assembling the machine to its \"ready-to-run\" state; it does not include floor\/masonry work or running electrical, pneumatic, or dust extraction services. Training will be conducted on site by the technician after installation is completed.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\"RCS\" version allows safe and precise sanding of honeycomb-core veneered panels\u003c\/li\u003e\n\u003cli\u003eRubber-coated pressing rollers before and after sanding head for even feeding\u003c\/li\u003e\n\u003cli\u003e1HP feed unit inverter motor\u003c\/li\u003e\n\u003cli\u003eFlexible, steel hold-down and anti-kickback plate on infeed table\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl panel allows operator to select desired working unit(s)\u003c\/li\u003e\n\u003cli\u003eLED panel introduction indicator clearly shows the operator where and when to feed the panel, helping optimize abrasive belt wear\u003c\/li\u003e\n\u003cli\u003eAutomatic table thickness detection\u003c\/li\u003e\n\u003cli\u003eBelt oscillation system ensures uniformity and reduces risk of breakage\u003c\/li\u003e\n\u003cli\u003eElectronic table positioning allows quick, accurate height adjustments\u003c\/li\u003e\n\u003cli\u003eHeavy-duty powered table lift uses four motors and rigid lifting columns secured at both the top and bottom for exceptional stability and parallelism\u003c\/li\u003e\n\u003cli\u003ePneumatic belt tensioning with a center fulcrum automatically compensates for abrasive belt taper, ensuring consistent tracking and sanding pressure\u003c\/li\u003e\n\u003cli\u003eInfeed and outfeed roller tables\u003c\/li\u003e\n\u003cli\u003eNatural rubber vacuum table with diamond-shaped belt provides the best traction\u003c\/li\u003e\n\u003cli\u003e50 shore, negative profile (waffle-style) rubber feed mat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLOGIC 50 K Electronic Programmer for timing\/anti-dubbing the pad\u003c\/li\u003e\n\u003cli\u003eFront and rear emergency stop buttons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMain motor:\u003c\/strong\u003e 30hp\u003cbr\u003e\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 1hp Inverter\u003cbr\u003e\u003cstrong\u003eFeed speeds:\u003c\/strong\u003e 15 or 30 FPM\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 43” (1,100mm)\u003cbr\u003e\u003cstrong\u003eDrum size:\u003c\/strong\u003e 4.75\" (120mm)\u003cbr\u003e\u003cstrong\u003eMax. workpiece thickness:\u003c\/strong\u003e 6.69\" (170mm)\u003cbr\u003e\u003cstrong\u003eMin. workpiece length:\u003c\/strong\u003e 12.5\" (317.5mm)\u003cbr\u003e\u003cstrong\u003eAbrasive belt length:\u003c\/strong\u003e 75\"\u003cbr\u003e\u003cstrong\u003eAbrasive belt size:\u003c\/strong\u003e 43\" x 75\"\u003cbr\u003e\u003cstrong\u003ePlaten size:\u003c\/strong\u003e 2\" (50mm)\u003cbr\u003e\u003cstrong\u003eDust outlet size (x2):\u003c\/strong\u003e 5.5\" (140mm)\u003cbr\u003e\u003cstrong\u003eMin. dust extraction:\u003c\/strong\u003e 1,800 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 65.4\" x 74\" x 84.6\"\u003cbr\u003e\u003cstrong\u003eGross weight:\u003c\/strong\u003e 2,707 lbs.\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e 230V, 3-phase, 87 A\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change; must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45864316600537,"sku":"R000501","price":43770.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/DMC3095-1_93fee357-e2e8-4ff8-8186-acbbd3260d97.jpg?v=1770232262"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/all-professional-wide-belt-sanders\/brand_scm.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}