Laguna 18|CX Band Saw 1.75hp, 1PH, 100V

Price
$ 3,999

Have questions? Give us a call at 260-637-0054.

The Laguna 18|CX Bandsaw follows in the traditions of high-performance and reliability to be expected from a Laguna Tools Bandsaw. The 18|CX is built with a 1.75HP, 110V motor and features variable speed control to cut through metals with ease. 

The upper and lower wheels are 65% wider and 78% heavier than the 14|BX and the 14|12 Band Saws. Additionally, the reinforced steel frame is 85% heavier than the 14|BX. The 18|BX is built around a 3HP, 220V motor and 145" (368 cm) blade for consistent results, cut-after-cut, regardless of material.

Most blade guide systems are designed to support the blade on the sides, and then either above or below the side guides to support the back of the blade. This forces the blade to twist as pressure from the wood being cut is transferred to the back blade guide. Laguna Guides solve this problem by supporting the blade on the sides above and below the back blade guide. By eliminating all blade twist, the Laguna Guide gives the blade unsurpassed stability. 

The Laguna Guide System utilizes 10 points of contact, 4 more than traditional guide systems. It features "Space Age" ceramic guide blocks as both side and thrust support. This enables the ceramic piece to gently touch the side of the blade, on all three sides without heat build-up, therefore giving stability, which has never been achieved before. 

Add the optional 18|BX & 18|CX Wheel System to make your band saw mobile!

Optional Blades:

  • Resaw KingCarbide-tipped resaw blades. The carbide tips outlast standard blades many times over and can be re-sharpened. The profile of the carbide tipped teeth is optimized to provide a thin kerf and smooth finish cuts in woods. A 3/4" blade width is recommended for resawing on the 14|CX Band Saw.
  • Pro-Force BladesSwedish silicon steel blades with heat-treated teeth and rear surface (on wider blades). The Pro-Force Blades out perform standard carbon steel blades. These blades are available in a wide range of widths and TPI. The narrowest blades are used for tight curved work. The medium widths are perfect for gentle curves, light weight straight cuts, and general purpose work. Higher tooth counts provide smoother cuts and are required for thinner stock. Lower tooth counts provide faster cutting, rougher surface, and are better for thicker stock.

Note: Blade is not included. Check out our selection of band saw blades here.

Compare Models >

Features
  • Magnetic Starter
  • Disc-Brake with Micro Switch
  • 110V Outlet on Back for Light:>Window for Tension
  • Window for Tracking                       
  • Magnetic Blade Tension Guide
  • Worm Gear & Pinion Upper Guide
  • 10 Point Laguna Ceramic Guides
  • Mechanical Variable Speed Drive
  • Anodized Insert w/Micro-Adjustment
  • Dynamically Balanced Cast Iron Wheels
  • Urethane Single Piece Snap-on Tire
  • Quick-Release Tension   
Specs

Motor: 1.75hp, 100V, 14/7 Amp.
Recommended Breaker: 20 Amp.
Min-Max Blade Width: 1/8″-1-1/4″         
Resaw Capacity: 16″
Throat: 18-7/32″
Blade Length: 145″   
Low Blade Speed: 100-290 FPM
High Blade Speed: 1200-3500 FPM     
Cast Table Size: 20″ x 26″                     
Table Tilt: -6°, +45°                
Hi/Low Anodized Aluminum Fence: 22-3/4″ x 7-1/4″ x 11/16″
Table Height: 38″                                 
Dust Ports: 2 x 4″ • Overall Height: 77 3⁄4″
Dimensions, Base: 27″ x 20″               
Dimensions Overall: 38″ x 36″
Dimensions Box: 82″ x 34″ x 36″         
Weight (Net/Ship): 480/545 Lbs.

Video

SKU: MBAND18CX110175