{"title":"All Jointer\/Planer Combos","description":"","products":[{"product_id":"jet-8-jointer-planer-combo","title":"JET JJP-8BT 8\" Jointer\/Planer Combo","description":"\u003cp\u003eDesigned with the space limitations faced by many of today's woodworkers, the JET 8\" Jointer\/Planer packs the capabilities of the jointer and planer into a single, space-saving footprint. Combining the jointer and planer, two of the most-used core woodworking machines also saves money.\u003c\/p\u003e\n\u003cp\u003eThe precision machined, all-steel cutterhead is equipped with two high-quality knives. The knives are made from premium steel so they take and hold a sharp edge. The knives are retained with tried and true wedge blocks and gib screws. A jackscrew is located at each end of the knives to make setting critical heights easier and more accurate. A knife setting gauge is also provided to make setting the knives fast and easy.\u003c\/p\u003e\n\u003cp\u003eA 29\" x 8-1\/4\" cast aluminum jointing table is precisely machined to be flat and smooth. The JET 8\" Jointer\/Planer is capable of a maximum cut depth of 1\/8\" with the cut adjusted using a single knob at the end of the infeed table. A handy cut depth gauge is provided at the front edge of the infeed table. The infeed table is locked in position with a pair of finger-operated knobs.\u003c\/p\u003e\n\u003cp\u003eThe planer table surface is 17-1\/2\" long (with the included extension table) by 8-1\/2\" wide. The table is raised and lowered with a hand crank that plugs into the top of the JET 8\" Jointer\/Planer. A handy scale next to the planer infeed opening shows the current table to knife distance and makes setup fast and easy. The planer table moves up and down on four lead screws, one in each corner of the main cabinet for maximum stability. The table is secured for making cuts with a single locking handle.\u003c\/p\u003e\n\u003cp\u003eThe JET 8\" Jointer\/Planer comes with a single dust shroud assembly that can be installed for either jointing or planer functions. This chute is attached using finger-operated knobs that make installation fast and tool free. The dust shroud is also designed as a safety interlock for the jointer-planer. This means the machine will not operate unless the dust shroud is installed in either the jointing or planning mode.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003eGet the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-universal-benchtop-machine-stand\" title=\"JET Universal Benchtop Machine Stand product page\" target=\"_blank\"\u003eUniversal\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/jet-flip-top-benchtop-machine-table\" title=\"JET Flip Top Benchtop Machine Table product page\" target=\"_blank\"\u003eFlip Top\u003c\/a\u003e stands to optimize your 8\" Jointer\/Planer.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCombination bench top jointer and planer provides a 2-in-1 machine to maximize workspace\u003c\/li\u003e\n\u003cli\u003eCompact bench top design fits conveniently in small shop environments\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 13 Amp motor for various cutting applications\u003c\/li\u003e\n\u003cli\u003eIntegrated cord wrap makes transporting easy and ensures workshop safety\u003c\/li\u003e\n\u003cli\u003eLarge aluminum extruded fence\u003c\/li\u003e\n\u003cli\u003eOversized, ergonomic knobs provide ease of use and maximum control\u003c\/li\u003e\n\u003cli\u003ePlaning and joining tables lock\u003c\/li\u003e\n\u003cli\u003ePrecision machined table top ensures a smooth, straight cut\u003c\/li\u003e\n\u003cli\u003eSheet metal out feed table with height adjustment supports long work pieces and helps reduce snipe\u003c\/li\u003e\n\u003cli\u003eTwo high speed steel knives for smooth cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 9,000 RPM\u003cbr\u003e\u003cstrong\u003eNumber of knives:\u003c\/strong\u003e 2\u003cbr\u003e\u003cstrong\u003eCutter knife length:\u003c\/strong\u003e 8-1\/4\"\u003cbr\u003e\u003cstrong\u003eCutter knife thickness:\u003c\/strong\u003e 0.060\"\u003cbr\u003e\u003cstrong\u003eDust port dia.:\u003c\/strong\u003e 2-1\/2\" or 4\"\u003cbr\u003e\u003cstrong\u003eJointer table:\u003c\/strong\u003e 29\" x 8-1\/4\"\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e 1\/8\"\u003cbr\u003e\u003cstrong\u003eMax. cutting width:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e 4-1\/8\" x 21\"\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 90° - 45° R\u003cbr\u003e\u003cstrong\u003ePlaner table:\u003c\/strong\u003e 10-5\/8\" x 8-1\/2\"\u003cbr\u003e\u003cstrong\u003eMax. cutting thickness:\u003c\/strong\u003e 4-1\/2\"\u003cbr\u003e\u003cstrong\u003eMax. depth of cut:\u003c\/strong\u003e 5\/64\"\u003cbr\u003e\u003cstrong\u003eMin. length of work piece:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eFeed rate:\u003c\/strong\u003e 19.5 fpm\u003cbr\u003e\u003cstrong\u003eMotor voltage:\u003c\/strong\u003e 120V, 60 Hz, 13A\u003cbr\u003e\u003cstrong\u003eOverall dimensions:\u003c\/strong\u003e 31\" x 16-1\/2\" x 18-1\/2\"\u003cbr\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 58 lbs.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":32102173321,"sku":"JT9-707400","price":711.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/707400-1.jpg?v=1748882606"},{"product_id":"minimax-fs-30c-t-12-tersa-jointer-planer","title":"SCM Minimax FS 30C - Tersa 12\" Jointer\/ Planer","description":"\u003cp\u003eThe FS 30C is the ultimate space-saving jointer\/planer combo. It delivers premium power in a compact size without compromising on quality. Made in Italy, this robust machine boasts features such as a long 59” cast-iron table, 4.8HP single-phase motor, and a quick-tilting jointer fence. With one of the quickest change-over times in the industry, the FS 30C is a no-brainer for shops with limited space looking for a high-quality, two-in-one solution.\u003c\/p\u003e\n\u003cp\u003eFor small one- or two-person shops where space is tight, a jointer\/planer combo delivers serious capability without the footprint of two separate machines. Instead of juggling a narrow jointer and a portable planer (often on wheels or in storage), you get wider jointing capacity and robust planing in one setup. That means fewer workarounds for common stock, more horsepower, and consistently better results.\u003c\/p\u003e\n\u003cp\u003eChanging between jointer and planer on the FS 30C is quicker and easier than on similar machines. This is thanks to the two dust collection outlets (one for the jointer, the other for the planer) being positioned on the same side. Also, when changing back from planer to jointer, it is not required to drop the planer table all the way down. The entire changeover process can be done in under a minute!\u003c\/p\u003e\n\u003cp\u003eAlso included is an American-style, OSHA-approved standard guard. American safety standards state that when the guard is moved out of the way and let go, it must automatically recover the cutterhead, which is why the American “pork chop” guard is standard. It is spring-loaded to comply with American safety standards.\u003c\/p\u003e\n\u003cp\u003eThe FS 30C - T comes with a \"Tersa\" Knife cutterhead. Tersa Knives are double-sided for long life, disposable, and lock into place when you start the machine — no special tools required! These knives also have one of the quickest changeover times in the industry. Available in different materials and designs for different types of wood. Click the link below to see all Tersa Knives.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"All Tersa Knives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-planer-jointer-knives-and-inserts\/brand_tersa\" target=\"_blank\"\u003eReplacement knives \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e72mm diameter cutter block with 3 knives in standard planer version\u003c\/li\u003e\n\u003cli\u003eTersa cutterblock offers tightening knives and automatic adjustment\u003c\/li\u003e\n\u003cli\u003eDouble-sided knives can be flipped over, reinserted, and used again\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTersa knives never come loose\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOSHA-approved standard guard for safety\u003c\/li\u003e\n\u003cli\u003eThicknesser infeed roller has helical toothing to guarantee strong, constant workpiece feed\u003c\/li\u003e\n\u003cli\u003eSandblasted steel outfeed roller maintains the perfect post-machining finish\u003c\/li\u003e\n\u003cli\u003eVery high rigidity of the surfacing fences made of extruded aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e Single-phase, 230v\u003cbr\u003e\u003cstrong\u003eCircuit Breaker:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 4.8hp\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 67.5\" x 34.5\" x 41.4\" (1,715 x 876 x 1,052mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 595 lbs.\u003cbr\u003e\u003cstrong\u003eDust extraction port diameter:\u003c\/strong\u003e 4.75” (120mm)\u003cbr\u003e\u003cstrong\u003eMin. recommended dust extraction volume:\u003c\/strong\u003e 600 cfm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOverall table length:\u003c\/strong\u003e 59.75” (1,510mm)\u003cbr\u003e\u003cstrong\u003eMax. jointing width:\u003c\/strong\u003e 12” (300mm)\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 5,200 RPM\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e 0.16” (4mm)\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 0° - 45°\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 12” x 22” (300 x 585mm)\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e 0.12”\/9” (3 \/ 230mm)\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e 0.16” (4mm)\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e 23 fpm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4.8hp Single-phase (230v) motor\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast iron tables\u003c\/li\u003e\n\u003cli\u003e3-knife “Tersa” quick-change cutter head\u003c\/li\u003e\n\u003cli\u003eAmerican-style jointer guard\u003c\/li\u003e\n\u003cli\u003eQuick-tilting jointer fence\u003c\/li\u003e\n\u003cli\u003eJointer tables open away from operator\u003c\/li\u003e\n\u003cli\u003e(2) Independent dust collection ports\u003c\/li\u003e\n\u003cli\u003eTool set \u0026amp; owner’s manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YVMWuNeLRKE\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431154225369,"sku":"FS30C-T","price":6275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/fs30c.1.jpg?v=1645883155"},{"product_id":"minimax-fs-30c-x-12-xylent-jointer-planer","title":"SCM Minimax FS 30C - Xylent 12\" Jointer\/Planer","description":"\u003cp\u003eThe FS 30C is the ultimate space-saving jointer\/planer combo. It delivers premium power in a compact size without compromising on quality. Made in Italy, this robust machine boasts features such as a long 59” cast-iron table, 4.8HP single-phase motor, and a quick-tilting jointer fence. With one of the quickest change-over times in the industry, the FS 30C is a no-brainer for shops with limited space looking for a high-quality, two-in-one solution.\u003c\/p\u003e\n\u003cp\u003eFor small one- or two-person shops where space is tight, a jointer\/planer combo delivers serious capability without the footprint of two separate machines. Instead of juggling a narrow jointer and a portable planer (often on wheels or in storage), you get wider jointing capacity and robust planing in one setup. That means fewer workarounds for common stock, more horsepower, and consistently better results.\u003c\/p\u003e\n\u003cp\u003eThe Minimax FS 30C comes with a XYLENT Cutterhead. XYLENT is the quietest and most durable knife option, making it suitable for heavier cuts. It significantly reduces decibel output from the jointer. It also improves dust extraction since it produces very small chips. The spiral cutterhead shears at an angle instead of cutting head on, minimizing any rippling pattern left on the workpiece.\u003c\/p\u003e\n\u003cp\u003eChanging between jointer and planer on the FS 30C is quicker and easier than on similar machines. This is thanks to the two dust collection outlets (one for the jointer, the other for the planer) being positioned on the same side. Also, when changing back from planer to jointer, it is not required to drop the planer table all the way down. The entire changeover process can be done in under a minute!\u003c\/p\u003e\n\u003cp\u003eAlso included is an American-style, OSHA-approved standard guard. American safety standards state that when the guard is moved out of the way and let go, it must automatically recover the cutterhead, which is why the American “pork chop” guard is standard. It is spring-loaded to comply with American safety standards.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e3 rows of quarter turn knives (15 x 15 x 2.5mm) for XYLENT cutterhead\u003c\/li\u003e\n\u003cli\u003ePrecision-ground cast-iron tables\u003c\/li\u003e\n\u003cli\u003eAmerican-style jointer guard\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum fence that tilts up to 45°\u003c\/li\u003e\n\u003cli\u003eQuick changeover time from jointer to planer and back\u003c\/li\u003e\n\u003cli\u003ePlaner handwheel with gravitational numerical readout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHorsepower:\u003c\/strong\u003e\u003cspan\u003e 4.8HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 595 lbs.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust extraction port diameter:\u003c\/strong\u003e\u003cspan\u003e 4.75” (120mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. recommended dust extraction volume:\u003c\/strong\u003e\u003cspan\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 67.5\" x 34.5\" x 41.4\" (1,715 x 876 x 1,052mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e Single-phase, 230V, 30 Amps\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOverall table length:\u003c\/strong\u003e\u003cspan\u003e 59.75” (1510 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. jointing width:\u003c\/strong\u003e\u003cspan\u003e 12” (300 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e\u003cspan\u003e 5,200 RPM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e\u003cspan\u003e 0.16” (4 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e\u003cspan\u003e 0° - 45°\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e\u003cspan\u003e 12” x 22” (300 mm x 585 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e\u003cspan\u003e 0.12”\/9” (3 mm\/230 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e\u003cspan\u003e 0.16” (4 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e\u003cspan\u003e 23 fpm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4.8hp Single-phase (230v) motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePrecision-ground cast iron tables\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 rows of quarter turn (15x15x2.5mm) knives for Xylent cutterhead\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAmerican-style jointer guard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick-tilting jointer fence\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(2) Independent dust collection ports\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTool set \u0026amp; owner’s manual\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlaner handwheel with gravitational numerical readout\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YVMWuNeLRKE\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431158845657,"sku":"FS30C-X","price":6875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/fs30c.1_eaba1fe8-d6dd-443f-87aa-9f1c04aebf81.jpg?v=1645883181"},{"product_id":"minimax-fs-41c-t-tersa-16-jointer-planer","title":"SCM Minimax FS 41C - Tersa 16\" Jointer\/Planer","description":"\u003cp\u003eThe Minimax FS 41C Jointer\/Planer meets the demands of professionals while also saving space around the shop. This machine offers power and precision in a compact size without compromising on quality. Made in Italy, the Minimax FS 41C features high-quality parts that outlast and outperform the competition. If you’re looking for maximize your production and efficiency without sacrificing the space two machines would take up, the FS 41C is right for you!\u003c\/p\u003e\n\u003cp\u003eFor shops where space is tight, a jointer\/planer combo delivers serious capability without the footprint of two separate machines. Instead of juggling a narrow jointer and a portable planer (often on wheels or in storage), you get wider jointing capacity and robust planing in one setup. That means fewer workarounds for common stock, more horsepower, and consistently better results.\u003c\/p\u003e\n\u003cp\u003eThe FS 41C T has a separate jointer fence that rides on a rail mounted to the jointer table. The fence has a cast iron knuckle and is tiltable to 45°. It also features a Jointer bed over 70”, a 16” width cutterhead, and comes with a USA OSHA-approved American guard. The planer is able to process up to 9” thick material.\u003c\/p\u003e\n\u003cp\u003eThe FS 41C - T comes with a \"Tersa\" Knife cutterhead. Tersa Knives are double-sided for long life, disposable, and lock into place when you start the machine — no special tools required! These knives also have one of the quickest changeover times in the industry. Available in different materials and designs for different types of wood. Click the link below to see all Tersa Knives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-planer-jointer-knives-and-inserts\/brand_tersa\" title=\"All Tersa Knives\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eReplacement knives \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e72mm diameter cutter block with 3 knives in standard planer version\u003c\/li\u003e\n\u003cli\u003eTersa cutter block offers tightening knives and automatic adjustment\u003c\/li\u003e\n\u003cli\u003eDouble-sided knives can be flipped over, reinserted, and used again\u003c\/li\u003e\n\u003cli\u003eTersa knives never come loose\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOSHA-approved standard guard for safety\u003c\/li\u003e\n\u003cli\u003eThicknesser infeed roller has helical toothing to guarantee strong, constant workpiece feed\u003c\/li\u003e\n\u003cli\u003eSandblasted steel outfeed roller maintains the perfect post-machining finish\u003c\/li\u003e\n\u003cli\u003eVery high rigidity of the surfacing fences made of extruded aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e Single-phase, 230v\u003cbr\u003e\u003cstrong\u003eCircuit Breaker:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 4.8 hp\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 78.4\" x 38.8\" x 41.4\" (2,000 x 986 x 1,052mm)\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 775 lbs.\u003cbr\u003e\u003cstrong\u003eDust extraction port diameter:\u003c\/strong\u003e 4.75” (120 mm)\u003cbr\u003e\u003cstrong\u003eMin. recommended dust extraction volume:\u003c\/strong\u003e 600 cfm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOverall table length:\u003c\/strong\u003e 70.8” (1,800 mm)\u003cbr\u003e\u003cstrong\u003eMax. jointing width:\u003c\/strong\u003e 16” (410 mm)\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e 5,200 RPM\u003cbr\u003e\u003cstrong\u003eMax. depth of cut: \u003c\/strong\u003e0.125\" (4 mm)\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 0° - 45°\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 16” x 23.8” (410 mm x 605 mm)\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e 0.12”\/9” (3 mm\/230 mm)\u003cbr\u003e\u003cstrong\u003eMax. stock removal per pass:\u003c\/strong\u003e 1\/8” (4 mm)\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e 23 fpm\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-milled cast iron tables\u003c\/li\u003e\n\u003cli\u003e3-knife “Tersa” cutterhead w\/ quick-change knives\u003c\/li\u003e\n\u003cli\u003ePlaner handwheel with gravitational numerical readout\u003c\/li\u003e\n\u003cli\u003eSide-mounted Jointer fence\u003c\/li\u003e\n\u003cli\u003eJointer tables open away from the operator\u003c\/li\u003e\n\u003cli\u003eAmerican-style jointer guard\u003c\/li\u003e\n\u003cli\u003eTool set and operator’s manual\u003c\/li\u003e\n\u003cli\u003eMobility kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431160549593,"sku":"FS41C-T","price":7875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/fs41c.1.jpg?v=1645883212"},{"product_id":"minimax-fs-41c-x-xylent-jointer-planer","title":"SCM Minimax FS 41C - Xylent 16\" Jointer\/Planer","description":"\u003cp\u003eThe Minimax FS 41C Jointer\/Planer meets the demands of professionals while also saving space around the shop. This machine offers power and precision in a compact size without compromising on quality. Made in Italy, the Minimax FS 41C features high-quality parts that outlast and outperform the competition. If you’re looking for maximize your production and efficiency without sacrificing the space two machines would take up, the FS 41C is right for you!\u003c\/p\u003e\n\u003cp\u003eFor shops where space is tight, a jointer\/planer combo delivers serious capability without the footprint of two separate machines. Instead of juggling a narrow jointer and a portable planer (often on wheels or in storage), you get wider jointing capacity and robust planing in one setup. That means fewer workarounds for common stock, more horsepower, and consistently better results.\u003c\/p\u003e\n\u003cp\u003eThis machine comes with a XYLENT Cutterhead. XYLENT is the quietest and most durable knife option, making it suitable for heavier cuts. It significantly reduces decibel output from the jointer. It also improves dust extraction since it produces very small chips. The spiral cutterhead shears at an angle instead of cutting head on, minimizing any rippling pattern left on the workpiece.\u003c\/p\u003e\n\u003cp\u003eThe FS 41C X has a separate jointer fence that rides on a rail mounted to the jointer table. The fence has a cast iron knuckle and is tiltable to 45°. It also features a Jointer bed over 70”, a 16” width cutterhead, and comes with a USA OSHA-approved American guard. The planer is able to process up to 9” thick material.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eSCM warrants that every machine is free of defects in workmanship and materials for a period of one (1) year beginning on the date the machinery is accepted by the customer. Belts, bearings, and common electrical parts carry a six-month warranty. This warranty does not include wearable items or maintenance required in the ordinary course of operation.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eXYLENT cutterhead with 66 knives\u003c\/li\u003e\n\u003cli\u003eThickness is adjusted via the manual handwheel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJointer fence mounts on the short side of the infeed table\u003c\/li\u003e\n\u003cli\u003eEach jointer table swings away separately during changeover and jointer fence should be removed\u003c\/li\u003e\n\u003cli\u003eTwo dust collection outlets\u003c\/li\u003e\n\u003cli\u003eImproves dust extraction due to the production of very small chips\u003c\/li\u003e\n\u003cli\u003e4-tip cutters can be rotated into the cutting position when worn\u003c\/li\u003e\n\u003cli\u003eThe pressure of the thicknesser feed rollers can be adjusted according to the type of wood machined\u003c\/li\u003e\n\u003cli\u003eThicknesser infeed roller has helical toothing to guarantee strong, constant workpiece feed\u003c\/li\u003e\n\u003cli\u003eSandblasted steel outfeed roller maintains the perfect post-machining finish\u003c\/li\u003e\n\u003cli\u003eVery high rigidity of the surfacing fences made of extruded aluminum\u003c\/li\u003e\n\u003cli\u003eJointer tables open away from operator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eHorsepower:\u003c\/strong\u003e\u003cspan\u003e 4.8HP\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 775 lbs.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust extraction port diameter:\u003c\/strong\u003e\u003cspan\u003e 4.75” (120mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. recommended dust extraction volume:\u003c\/strong\u003e\u003cspan\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eOverall dimensions (L x W x H):\u003c\/strong\u003e 78.4\" x 38.8\" x 41.4\" (2,000 x 986 x 1,052mm)\u003cbr\u003e\u003cstrong\u003e*Electrical requirements:\u003c\/strong\u003e Single-phase, 230V, 30 Amps\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOverall table length:\u003c\/strong\u003e\u003cspan\u003e 70.8” (1,800mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMaximum jointing width:\u003c\/strong\u003e\u003cspan\u003e 16” (410mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e\u003cspan\u003e 5,200 RPM\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. depth of cut:\u003c\/strong\u003e\u003cspan\u003e 0.125” (4mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e\u003cspan\u003e 0° - 45°\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e\u003cspan\u003e 16” x 23.8” (410 x 605mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e\u003cspan\u003e 0.12”\/9” (3\/230mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. stock removal per pass:\u003c\/strong\u003e\u003cspan\u003e 1\/8” (4mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e\u003cspan\u003e 23 fpm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Subject to change. Must be verified prior to installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan\u003eIncludes\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAmerican-style jointer guard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperator’s manual\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMobility Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWheels for machine movement\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/yTpQkpbuKXM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431162876121,"sku":"FS41C-X","price":8475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/fs41c.1_c1d4dfbe-083f-4b09-81ae-bbc13261d760.jpg?v=1645883415"},{"product_id":"minimax-fs-41e-t-tersa-16-jointer-planer","title":"SCM Minimax FS 41E - Tersa 16\" Jointer\/Planer","description":"\u003cp\u003eA powerful and user-friendly surfacing-thicknessing machine for D.I.Y. woodworkers and craftsmen's workshops. The Minimax FS 41E T 16” jointer planer has a highly flexible production with an “elite” finishing, designed for the demanding craftsmen and carpenters.\u003c\/p\u003e\n\u003cp\u003eFor an impeccable finish, the pressure of the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant workpiece feed, while the outfeed roller, in sandblasted steel, maintains the perfect postprocessing finishing.\u003c\/p\u003e\n\u003cp\u003eThe FS 41E - T comes with a \"Tersa\" Knife cutterhead. Tersa Knives are double-sided for long life, disposable, and lock into place when you start the machine — no special tools required! These knives also have one of the quickest changeover times in the industry. Available in different materials and designs for different types of wood. Click the link below to see all Tersa Knives.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-planer-jointer-knives-and-inserts\/brand_tersa\" title=\"All Tersa Knives\" rel=\"noopener\" target=\"_blank\"\u003eReplacement knives \u0026gt;\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e87 mm diameter cutter block with 3 knives in standard planer version\u003c\/li\u003e\n\u003cli\u003eTersa cutter block offers tightening knives and automatic adjustment\u003c\/li\u003e\n\u003cli\u003ePressure of thicknesser feed rollers can be adjusted according to the type of wood machined\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHelicoidal profile of infeed roller guarantees firm and constant feed of workpiece\u003c\/li\u003e\n\u003cli\u003eSandblasted steel outfeed roller maintains perfect post-processing finishing\u003c\/li\u003e\n\u003cli\u003eExtremely rigid and smooth planing fence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e\u003cspan\u003e Single-phase, 230v\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 937 lbs.\u003cbr\u003e\u003cstrong\u003eOverall dimensions: \u003c\/strong\u003e34\" x 28\" x 79\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDust extraction port diameter:\u003c\/strong\u003e\u003cspan\u003e 4.75” (120 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. recommended dust extraction volume:\u003c\/strong\u003e\u003cspan\u003e 600 cfm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOverall table length:\u003c\/strong\u003e\u003cspan\u003e 79” (2,200 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. jointing width:\u003c\/strong\u003e\u003cspan\u003e 16” (410 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCutterhead speed:\u003c\/strong\u003e\u003cspan\u003e 5,300 RPM\u003cbr\u003e\u003cstrong\u003eMax. depth of cut: \u003c\/strong\u003e0.125\" (4 mm)\u003cbr\u003e\u003cstrong\u003eFence dimensions: \u003c\/strong\u003e6\" x 43\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e\u003cspan\u003e 0° - 45°\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e\u003cspan\u003e 16” x 27.5” (410 mm x 699 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e\u003cspan\u003e 0.12”\/9” (3 mm\/230 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e\u003cspan\u003e 1\/8” (4 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e\u003cspan\u003e 23 \u0026amp; 43 fpm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePrecision-ground cast iron tables w\/ spring assist\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e“Tersa” 4 knife cutterhead with quick-change knives\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDigital mechanical readout for planning thickness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIndustrial jointer fence, supported directly over cutterhead\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual dust extraction ports, both exit toward planer outfeed side\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual-post planer table support\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAmerican-style, OSHA-approved jointer guard\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTool set \u0026amp; operator’s manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eShipping\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431167758553,"sku":"FS41E-T","price":10875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Minimaxfs41e_da7220fd-e59b-4e62-ac99-c7a67f4558d7.jpg?v=1672165437"},{"product_id":"minimax-fs-41e-x-xylent-16-jointer-planer","title":"SCM Minimax FS 41E - Xylent 16\" Jointer\/Planer","description":"\u003cp\u003eMeet the Minimax FS 41E X: a true workhorse built for shops that demand precision, power, and efficiency without sacrificing valuable floor space.\u003c\/p\u003e\n\u003cp\u003eThis professional-grade, long-bed jointer\/planer combo pairs massive cast-iron tables and a smooth-adjusting tilting fence with breakthrough XYLENT cutterhead technology for ultra-quiet operation and exceptional surface finish. Designed for small- to mid-sized shops that refuse to compromise, the FS 41E X delivers heavy-duty performance, premium European build quality, and smart space-saving design all in one uncompromising machine.\u003c\/p\u003e\n\u003cp\u003eThis 16” jointer\/planer combo comes with a XYLENT Cutterhead. XYLENT is the quietest and most durable knife option, making it suitable for heavier cuts. It significantly reduces decibel output from the jointer. It also improves dust extraction since it produces very small chips. The spiral cutterhead shears at an angle instead of cutting head on, minimizing any rippling pattern left on the workpiece.\u003c\/p\u003e\n\u003cp\u003eThe standard guard offered on the Minimax jointer\/planer combination machine is a spring-type guard that always covers the unused portion of the knife. Other European-style guards require the guard to be manually moved into place when the fence is readjusted. When processing thick wood, this does not cover the blade as completely.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-ground cast-iron tables w\/spring assist\u003c\/li\u003e\n\u003cli\u003eXYLENT cutterhead technology\u003c\/li\u003e\n\u003cli\u003eDigital mechanical readout for planing thickness\u003c\/li\u003e\n\u003cli\u003eIndustrial jointer fence supported directly over cutterhead\u003c\/li\u003e\n\u003cli\u003eDual dust extraction ports\u003c\/li\u003e\n\u003cli\u003eAmerican-style jointer guard\u003c\/li\u003e\n\u003cli\u003eHelicoidal steel infeed roller\u003c\/li\u003e\n\u003cli\u003eSandblasted steel outfeed roller\u003c\/li\u003e\n\u003cli\u003eDual-post planer support table\u003c\/li\u003e\n\u003cli\u003eMobility kit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e Single-phase, 230V\u003cbr\u003e\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 4.8HP\u003cbr\u003e\u003cstrong\u003eRecommended Circuit:\u003c\/strong\u003e 30 amp\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 937 lbs.\u003cbr\u003e\u003cstrong\u003eOverall dimensions: \u003c\/strong\u003e34\" x 28\" x 79\"\u003cbr\u003e\u003cstrong\u003eMin. dust collection:\u003c\/strong\u003e 600 CFM\u003cbr\u003e\u003cstrong\u003eDust extraction outlet dia.: \u003c\/strong\u003e4.75\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003eJointer\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWorking width:\u003c\/strong\u003e 16” (410 mm)\u003cbr\u003e\u003cstrong\u003eJointer tables total length:\u003c\/strong\u003e 79” (2,200mm)\u003cbr\u003e\u003cstrong\u003eMax. depth of cut:\u003c\/strong\u003e 0.12\" (5mm)\u003cbr\u003e\u003cstrong\u003eFence dimensions: \u003c\/strong\u003e6\" x 43\"\u003cbr\u003e\u003cstrong\u003eFence tilt:\u003c\/strong\u003e 0° - 45°\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #70973e;\"\u003ePlaner\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTable dimensions:\u003c\/strong\u003e 16” x 27.5” (410 x 775mm)\u003cbr\u003e\u003cstrong\u003eMin.\/Max. working thickness:\u003c\/strong\u003e 0.125”\/ 9” (3 \/ 240mm)\u003cbr\u003e\u003cstrong\u003eMax. stock removal:\u003c\/strong\u003e 1\/8” (5mm)\u003cbr\u003e\u003cstrong\u003eFeed speed:\u003c\/strong\u003e 23 \u0026amp; 46 fpm\u003cbr\u003e\u003cstrong\u003eExhaust outlet dia.: \u003c\/strong\u003e4.72\" (120mm)\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWheels for machine movement\u003c\/li\u003e\n\u003cli\u003eHeavy-duty push stick\u003c\/li\u003e\n\u003cli\u003eTool set \u0026amp; operator's manual\u003c\/li\u003e\n\u003cli\u003eAmerican-style jointer guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003cspan\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment:\u003c\/strong\u003e The machine is in OakTree Supply's warehouse and is ready to ship. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer’s U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer’s warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDates listed as “estimated” are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":42431169069273,"sku":"FS41E-X","price":11475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Minimaxfs41e.jpg?v=1672165405"},{"product_id":"scm-minimax-fs-41es-xylent-16-inch-jointer-planer-3ph-220v","title":"SCM Minimax FS 41ES - Xylent 16\" Jointer\/Planer - 3PH, 220V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 41ES-X (3-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 41ES-X | 16\" Jointer\/Planer, 3-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  95mm Xylent cutterhead, 87\" parallelogram tables, single-lever\n  changeover, 8hp three-phase. Freight included; forklift or\n  terminal pickup required.\n  (149 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe ES is where the Minimax jointer\/planer lineup makes a structural leap: true parallelogram tables, powered planer bed movement, and a changeover that requires removing nothing. The 3-phase configuration adds an 8hp motor to that platform — the right spec for shops running this machine hard, processing abrasive or figured stock regularly, or simply wanting the full motor on a dedicated three-phase circuit. At 87\" of jointer bed and a full 16\" working width, this machine handles what serious hobbyists and small professional shops actually need.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e87\" (2,200mm) jointer table, 16\" (410mm) working width:\u003c\/strong\u003e face-joint full-width furniture stock without a pre-rip pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95mm Xylent spiral cutterhead:\u003c\/strong\u003e 66 carbide inserts, each with 4 cutting edges; rotate three times before replacing; measurably quieter than straight-knife heads\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8hp three-phase motor:\u003c\/strong\u003e 220V; requires three-phase power — no VFD, no phase converter\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FS lineup runs Classic, Elite, and Elite S — and the ES isn't just an incremental step. It's a different mechanism underneath. The Classic series runs separate jointer tables on a dovetail\/wedge adjustment system. The Elite improves that platform. The Elite S connects both tables mechanically on a true parallelogram with eight cam adjustment points, four per table. Both tables unlock simultaneously with a single lever and open away from the operator at 90°. Independently, the parallelogram mechanism keeps both jointer tables coplanar through the full range of jointing height adjustment. On a wedge-adjusted machine, any height change can shift that relationship, requiring you to verify both surfaces before running stock. On the ES, the geometry is maintained by the mechanism itself.\u003c\/p\u003e\n\u003cp\u003eThe changeover sequence on the ES is worth understanding against competing machines. On Felder and Hammer combination machines, the planer table must travel all the way down before you can switch functions. On every Minimax, including the Classic, only mid-travel is required. The ES removes two more steps: on the Classic, the fence and guard both come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between jointer and planer functions — the hose never gets repositioned.\u003c\/p\u003e\n\u003cp\u003eThe Xylent cutterhead runs 66 carbide inserts in a spiral pattern across a 95mm-diameter body. Each 15×15×2.5mm insert has four usable cutting edges — rotate the insert three times before replacing it. Spiral geometry shears at an angle rather than cutting head-on, which reduces operational noise and produces fine chips that are easier on your dust collection system. Carbide's wear resistance makes this the right choice for high-volume use, figured or silica-heavy species, and any shop where longevity matters more than the fastest possible knife swap. If your priority is the best possible surface quality at lower volume and the fastest knife change, look at the FS 41ES-T with the Tersa cutterhead — four self-indexing HSS knives that drop in without tools.\u003c\/p\u003e\n\u003cp\u003eThe 8hp motor is the full production specification for this machine. It runs on 220V three-phase power — a purpose-built three-phase motor, not a single-phase motor with a VFD bolted on. If you have three-phase power in your shop, this is the configuration to run. If you're on single-phase only, the FS 41ES-X 1-phase runs a 4.8hp single-phase motor on a 230V, 30A circuit.\u003c\/p\u003e\n\u003cp\u003eThe planer table rides on four trapezoidal-threaded columns, each sealed against dust intrusion. Powered bed movement handles height positioning, with a digital LED readout showing position to 0.1mm. Two feed speeds give you 23 fpm for heavier cuts, thicker stock removal, and finish passes, and 46 fpm for moving dimension stock through quickly. The infeed roller is helicoidal steel for consistent grip across the full working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eAt 1,285 lbs., this machine is built for long-term stability. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 41ES and the FS 41E?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree structural changes. First, the ES uses a parallelogram table mechanism with 8 cam points instead of the FS 41E's dovetail\/wedge system — both tables are mechanically connected and stay coplanar at every jointing height setting without requiring re-verification. Second, the ES changeover requires removing neither the fence nor the guard; on the E, the fence stays in place but the guard needs to come off. Third, the ES planer table rides on four trapezoidal-threaded, dust-protected columns, and powered planer bed movement with an LED digital readout is standard on all ES configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Xylent and Tersa cutterheads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right choice depends on how the machine gets used. The FS 41ES-T uses four HSS knives on a 95mm cutterhead — they self-index on installation and can be swapped without tools in under a minute. Many furniture makers prefer the Tersa's surface quality for final-pass work. The Xylent (this machine) runs 66 carbide inserts with four usable cutting edges per insert — rotate three times, then replace. Carbide outlasts HSS significantly in high-volume use and holds up better on abrasive species, figured grain, and reclaimed material. For a shop running the machine daily or processing difficult stock, the Xylent's longevity and reduced noise are the meaningful advantages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require three-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a purpose-built 8hp three-phase motor running on 220V. It requires a three-phase electrical service — no VFD or phase converter will be used. If you have single-phase power only, the FS 41ES-X 1-phase runs a 4.8hp single-phase motor on a dedicated 230V, 30A circuit and does not require a phase converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned. The Xylent cutterhead produces finer chips than a straight-knife head, which improves extraction efficiency at the same CFM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the ES compared to other Minimax models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ES is the simplest changeover of any machine in the C, E, and ES families. On the Classic series, the fence and guard both need to come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 41ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 41ES-X eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 41ES-X qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"\/pages\/section-179\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXylent spiral cutterhead:\u003c\/strong\u003e 95mm diameter, 66 carbide inserts in 3 rows of 15×15×2.5mm. Each insert has four cutting edges — rotate three times before replacing. Spiral geometry reduces noise and produces fine chips for better dust collection performance. Dynamometric key included for correct insert torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 16.125\" × 30.5\" (410 × 775mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8hp three-phase motor:\u003c\/strong\u003e 220V, purpose-built three-phase. No VFD, no phase converter. Requires three-phase electrical service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo feed speeds:\u003c\/strong\u003e 23 fpm for heavier cuts, thicker stock removal, and finish passes; 46 fpm for moving dimension stock through quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e16\" (410mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e87\" (2,200mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e95mm (3.74\")\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 5mm (0.1875\")\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size:\u003c\/strong\u003e 16.125\" × 30.5\" (410 × 775mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.44\" (240mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.1\" (2.5mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e5mm (0.1875\")\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e23 fpm \/ 46 fpm\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller:\u003c\/strong\u003e Rubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e8hp, 220V, three-phase\u003cbr\u003e\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 1,285 lbs.\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eXylent spiral cutterhead (installed) with dynamometric key\u003c\/li\u003e\n\u003cli\u003e10 spare carbide inserts (15×15×2.5mm)\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 41ES-X 16-inch jointer planer combination machine, 3-phase 220V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 41ES-X dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail or angle shot):\n  \"Xylent 95mm spiral cutterhead with 66 carbide inserts installed in Minimax FS 41ES-X\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 41ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 41ES-X four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (LED readout or control area):\n  \"FS 41ES powered planer bed movement with LED digital height readout to 0.1mm resolution\"\n\n  Image 7 (changeover \/ table lift):\n  \"Minimax FS 41ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43353863356633,"sku":"FS41ES-X-3ph","price":14875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/FS41ES-X-1_24e8b9e1-c557-4463-87f3-15be10d56561.jpg?v=1674679916"},{"product_id":"scm-minimax-fs-41es-xylent-16-inch-jointer-planer-1ph-230v","title":"SCM Minimax FS 41ES - Xylent 16\" Jointer\/Planer - 1PH, 230V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 41ES-X (1-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 41ES-X | 16\" Jointer\/Planer, 1-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  95mm Xylent cutterhead, 87\" parallelogram tables, single-lever\n  changeover, 4.8hp single-phase. Freight included; forklift or\n  terminal pickup required.\n  (151 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe ES is where the Minimax jointer\/planer lineup makes a structural leap: true parallelogram tables, powered planer bed movement, and a changeover that requires removing nothing — all on a 230V, 30A circuit. At 87\" of jointer bed and a full 16\" working width, this machine handles what serious hobbyists and small professional shops actually need without asking you to run three-phase power to get there.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e87\" (2,200mm) jointer table, 16\" (410mm) working width:\u003c\/strong\u003e face-joint full-width furniture stock without a pre-rip pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95mm Xylent spiral cutterhead:\u003c\/strong\u003e 66 carbide inserts, each with 4 cutting edges; rotate three times before replacing; measurably quieter than straight-knife heads\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue single-phase 4.8hp motor:\u003c\/strong\u003e 230V, 30A; not a three-phase motor run through a VFD, no phase converter required\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FS lineup runs Classic, Elite, and Elite S — and the ES isn't just an incremental step. It's a different mechanism underneath. The Classic series runs separate jointer tables on a dovetail\/wedge adjustment system. The Elite improves that platform. The Elite S connects both tables mechanically on a true parallelogram with eight cam adjustment points, four per table. Both tables unlock simultaneously with a single lever and open away from the operator at 90°. Independently, the parallelogram mechanism keeps both jointer tables coplanar through the full range of jointing height adjustment. On a wedge-adjusted machine, any height change can shift that relationship, requiring you to verify both surfaces before running stock. On the ES, the geometry is maintained by the mechanism itself.\u003c\/p\u003e\n\u003cp\u003eThe changeover sequence on the ES is worth understanding against competing machines. On Felder and Hammer combination machines, the planer table must travel all the way down before you can switch functions. On every Minimax, including the Classic, only mid-travel is required. The ES removes two more steps: on the Classic, the fence and guard both come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between jointer and planer functions — the hose never gets repositioned.\u003c\/p\u003e\n\u003cp\u003eThe Xylent cutterhead runs 66 carbide inserts in a spiral pattern across a 95mm-diameter body. Each 15×15×2.5mm insert has four usable cutting edges — rotate the insert three times before replacing it. Spiral geometry shears at an angle rather than cutting head-on, which reduces operational noise and produces fine chips that are easier on your dust collection system. Carbide's wear resistance makes this the right choice for high-volume use, figured or silica-heavy species, and any shop where longevity matters more than the fastest possible knife swap. If your priority is the best possible surface quality at lower volume and the fastest knife change, look at the FS 41ES-T with the Tersa cutterhead — four self-indexing HSS knives that drop in without tools.\u003c\/p\u003e\n\u003cp\u003eThe planer table rides on four trapezoidal-threaded columns, each sealed against dust intrusion. Powered bed movement handles height positioning, with a digital LED readout showing position to 0.1mm. Two feed speeds give you 23 fpm for heavier cuts, thicker stock removal, and finish passes, and 46 fpm for moving dimension stock through quickly. The infeed roller is helicoidal steel for consistent grip across the full working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eAt 1,285 lbs., this machine is built for long-term stability. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 41ES and the FS 41E?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree structural changes. First, the ES uses a parallelogram table mechanism with 8 cam points instead of the FS 41 E's dovetail\/wedge system — both tables are mechanically connected and stay coplanar at every jointing height setting without requiring re-verification. Second, the ES changeover requires removing neither the fence nor the guard; on the E, the fence stays in place but the guard needs to come off. Third, the ES planer table rides on four trapezoidal-threaded, dust-protected columns, and powered planer bed movement with an LED digital readout is standard on all ES configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Xylent and Tersa cutterheads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right choice depends on how the machine gets used. The FS 41ES-T uses four HSS knives on a 95mm cutterhead — they self-index on installation and can be swapped without tools in under a minute. Many furniture makers prefer the Tersa's surface quality for final-pass work. The Xylent (this machine) runs 66 carbide inserts with four usable cutting edges per insert — rotate three times, then replace. Carbide outlasts HSS significantly in high-volume use and holds up better on abrasive species, figured grain, and reclaimed material. For a shop running the machine daily or processing difficult stock, the Xylent's longevity and reduced noise are the meaningful advantages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require a phase converter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Some combination machines in this category use a three-phase motor run through a VFD to operate on single-phase power, which derate the motor's actual output. This machine runs a purpose-built 4.8hp single-phase motor on 230V — no phase converter, no VFD. You need a dedicated 30A, 240V circuit. If you have three-phase power available, the FS 41ES-X is also offered with an 8hp, 220V three-phase motor — see the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/scm-minimax-fs-41es-xylent-16-inch-jointer-planer-1ph-230v\" target=\"_blank\" title='SCM Minimax FS 41ES - Xylent 16\" Jointer\/Planer - 1PH, 230V product page' rel=\"noopener\"\u003eseparate listing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned. The Xylent cutterhead produces finer chips than a straight-knife head, which improves extraction efficiency at the same CFM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the ES compared to other Minimax models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ES is the simplest changeover of any machine in the C, E, and ES families. On the Classic series, the fence and guard both need to come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 41ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 41ES-X eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 41ES-X qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca rel=\"noopener\" title=\"Section 179 Tax Break page\" href=\"https:\/\/www.oaktreesupply.com\/pages\/section-179\" target=\"_blank\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXylent spiral cutterhead:\u003c\/strong\u003e 95mm diameter, 66 carbide inserts in 3 rows of 15×15×2.5mm. Each insert has four cutting edges — rotate three times before replacing. Spiral geometry reduces noise and produces fine chips for better dust collection performance. Dynamometric key included for correct insert torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 16.125\" × 30.5\" (410 × 775mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrue single-phase motor:\u003c\/strong\u003e 4.8hp, 230V. Some competing combination machines use a three-phase motor derated through a VFD to run on single-phase power, which reduces actual output. This is a purpose-built single-phase motor. No VFD, no phase converter. Dedicated 30A circuit required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo feed speeds:\u003c\/strong\u003e 23 fpm for heavier cuts, thicker stock removal, and finish passes; 46 fpm for moving dimension stock through quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e16\" (410mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e87\" (2,200mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e95mm (3.74\")\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 5mm (0.1875\")\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size:\u003c\/strong\u003e 16.125\" × 30.5\" (410 × 775mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.44\" (240mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.1\" (2.5mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e5mm (0.1875\")\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e23 fpm \/ 46 fpm\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller:\u003c\/strong\u003e Rubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e4.8hp, 230V, single-phase\u003cbr\u003e\u003cstrong\u003eRecommended Circuit: \u003c\/strong\u003e30A dedicated\u003cbr\u003e\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 1,285 lbs.\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eXylent spiral cutterhead (installed) with dynamometric key\u003c\/li\u003e\n\u003cli\u003e10 spare carbide inserts (15×15×2.5mm)\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 41ES-X 16-inch jointer planer combination machine, 1-phase 230V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 41ES-X dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail or angle shot):\n  \"Xylent 95mm spiral cutterhead with 66 carbide inserts installed in Minimax FS 41ES-X\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 41ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 41ES-X four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (LED readout or control area):\n  \"FS 41ES powered planer bed movement with LED digital height readout to 0.1mm resolution\"\n\n  Image 7 (changeover \/ table lift):\n  \"Minimax FS 41ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43538257772761,"sku":"FS41ES-X-1ph","price":15475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/FS41ES-X-1.jpg?v=1674679296"},{"product_id":"cm-minimax-fs-41es-t-tersa-jointer-planer-3-phase","title":"SCM Minimax FS 41ES - Tersa 16\" Jointer\/Planer - 3PH, 220V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 41ES-T (3-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 41ES-T | 16\" Jointer\/Planer, 3-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  95mm Tersa cutterhead, 87\" parallelogram tables, single-lever\n  changeover, 8hp three-phase. Freight included; forklift or\n  terminal pickup required.\n  (149 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe ES is where the Minimax jointer\/planer lineup makes a structural leap: true parallelogram tables, powered planer bed movement, and a changeover that requires removing nothing. The 3-phase configuration adds an 8hp motor to that platform, and the Tersa cutterhead gives shops that value fast knife changes and final-pass surface quality the tool to do it. At 87\" of jointer bed and a full 16\" working width, this machine handles what serious hobbyists and small professional shops actually need.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e87\" (2,200mm) jointer table, 16\" (410mm) working width:\u003c\/strong\u003e face-joint full-width furniture stock without a pre-rip pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95mm Tersa cutterhead:\u003c\/strong\u003e 4 double-sided HSS knives; self-index on installation and swap without tools in under a minute; preferred by furniture makers for final-pass surface quality\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8hp three-phase motor:\u003c\/strong\u003e 220V; requires three-phase power — no VFD, no phase converter\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FS lineup runs Classic, Elite, and Elite S — and the ES isn't just an incremental step. It's a different mechanism underneath. The Classic series runs separate jointer tables on a dovetail\/wedge adjustment system. The Elite improves that platform. The Elite S connects both tables mechanically on a true parallelogram with eight cam adjustment points, four per table. Both tables unlock simultaneously with a single lever and open away from the operator at 90°. Independently, the parallelogram mechanism keeps both jointer tables coplanar through the full range of jointing height adjustment. On a wedge-adjusted machine, any height change can shift that relationship, requiring you to verify both surfaces before running stock. On the ES, the geometry is maintained by the mechanism itself.\u003c\/p\u003e\n\u003cp\u003eThe changeover sequence on the ES is worth understanding against competing machines. On Felder and Hammer combination machines, the planer table must travel all the way down before you can switch functions. On every Minimax, including the Classic, only mid-travel is required. The ES removes two more steps: on the Classic, the fence and guard both come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between jointer and planer functions — the hose never gets repositioned.\u003c\/p\u003e\n\u003cp\u003eThe Tersa cutterhead runs four double-sided HSS knives on a 95mm-diameter body. The knives self-index on installation — drop them in, and they register to the correct cutting circle without setup. Swapping a full set takes under a minute without tools. Many furniture makers choose the Tersa specifically for final-pass jointing and planing of hardwoods, where surface quality is the priority. HSS knives produce a slightly different cut characteristic than carbide inserts, and for hand-finish-quality face-glue work, that distinction is real. If your priority is longevity in high-volume use, abrasive species, figured grain, or reclaimed material, look at the FS 41ES-X with the Xylent spiral cutterhead — 66 carbide inserts with four usable cutting edges each.\u003c\/p\u003e\n\u003cp\u003eThe 8hp motor is the full production specification for this machine. It runs on 220V three-phase power — a purpose-built three-phase motor, not a single-phase motor with a VFD bolted on. If you have three-phase power in your shop, this is the configuration to run. If you're on single-phase only, the FS 41ES-T 1-phase runs a 4.8hp single-phase motor on a 230V, 30A circuit and does not require a phase converter.\u003c\/p\u003e\n\u003cp\u003eThe planer table rides on four trapezoidal-threaded columns, each sealed against dust intrusion. Powered bed movement handles height positioning, with a digital LED readout showing position to 0.1mm. Two feed speeds give you 23 fpm for heavier cuts, thicker stock removal, and finish passes, and 46 fpm for moving dimension stock through quickly. The infeed roller is helicoidal steel for consistent grip across the full working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eAt 1,285 lbs., this machine is built for long-term stability. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 41ES and the FS 41E?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree structural changes. First, the ES uses a parallelogram table mechanism with 8 cam points instead of the FS 41E's dovetail\/wedge system — both tables are mechanically connected and stay coplanar at every jointing height setting without requiring re-verification. Second, the ES changeover requires removing neither the fence nor the guard; on the E, the fence stays in place but the guard needs to come off. Third, the ES planer table rides on four trapezoidal-threaded, dust-protected columns, and powered planer bed movement with an LED digital readout is standard on all ES configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Tersa and Xylent cutterheads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right choice depends on how the machine gets used. The Tersa (this machine) uses four double-sided HSS knives on a 95mm cutterhead — they self-index on installation and swap without tools in under a minute. Many furniture makers choose the Tersa for its surface quality on final-pass jointing and planing of hardwoods. The FS 41ES-X runs 66 carbide inserts with four usable cutting edges per insert — rotate three times, then replace. Carbide outlasts HSS significantly in high-volume use and holds up better on abrasive species, figured grain, and reclaimed material. For a shop running the machine daily or processing difficult stock, the Xylent's longevity and reduced noise are the meaningful advantages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat knife alloy should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour alloy options are available. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-cr-chrome-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (CR) Chrome Steel Reversible Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eCR Chrome Steel\u003c\/a\u003e is the most economical — a practical choice for shops processing dirty or rough stock, as the softer alloy is less prone to chipping on grit or embedded debris. CR knives are also useful as a dedicated cleaning set: run them through dirty material first, then swap to a higher-grade alloy for finish jointing. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-hss-high-speed-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (HSS) High-Speed Steel Reversible Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eHSS\u003c\/a\u003e is the most popular option and handles the majority of softwood and open-grained hardwood work — pine, cedar, oak, walnut, cherry. For dense closed-cell hardwoods (maple, alder, birch, hickory, ash), \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-m-m42-high-speed-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (M+) M42 High-Speed Steel Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eM42 Cobalt\u003c\/a\u003e is the better choice: same alloy family as HSS but with additional cobalt content and a modified cutting angle that holds up better on tougher stock and is less prone to chipping. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-tungsten-carbide-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (TC) Tungsten Carbide Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eTungsten Carbide\u003c\/a\u003e is the highest-performing option — nearly twice as dense and stiff as steel, with edge life that significantly outlasts any HSS alloy. It handles all hardwoods, exotic species, and stock with glue lines, but comes at a significant price premium over HSS and M42. For most shops, HSS or M42 covers the majority of work; carbide makes sense where exotic species or glue-line jointing are routine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require three-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a purpose-built 8hp three-phase motor running on 220V. It requires a three-phase electrical service — no VFD or phase converter will be used. If you have single-phase power only, the FS 41ES-T 1-phase runs a 4.8hp single-phase motor on a dedicated 230V, 30A circuit and does not require a phase converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the ES compared to other Minimax models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ES is the simplest changeover of any machine in the C, E, and ES families. On the Classic series, the fence and guard both need to come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 41ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 41ES-T eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 41ES-T qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"https:\/\/www.oaktreesupply.com\/pages\/section-179\" title=\"Section 179 Tax Break page\" rel=\"noopener\" target=\"_blank\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTersa cutterhead:\u003c\/strong\u003e 95mm diameter, 4 double-sided HSS knives. Knives self-index on installation — no setup, no tools required. Full knife change in under a minute. Preferred by furniture makers for final-pass surface quality on hardwoods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 16.125\" × 30.5\" (410 × 775mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8hp three-phase motor:\u003c\/strong\u003e 220V, purpose-built three-phase. No VFD, no phase converter. Requires three-phase electrical service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo feed speeds:\u003c\/strong\u003e 23 fpm for heavier cuts, thicker stock removal, and finish passes; 46 fpm for moving dimension stock through quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e16\" (410mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e87\" (2,200mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e95mm (3.74\")\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 0.1875\"\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size:\u003c\/strong\u003e 16.125\" × 30.5\" (410 × 775mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.44\" (240mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.125\" (3mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e1\/8\"\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e23 fpm \/ 46 fpm\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller:\u003c\/strong\u003e Rubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e8hp, 220V, three-phase\u003cbr\u003e\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 1,285 lbs.\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTersa cutterhead (installed) with 4 double-sided HSS knives\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 41ES-T 16-inch jointer planer combination machine, 3-phase 220V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 41ES-T dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail or angle shot):\n  \"Tersa 95mm cutterhead with 4 double-sided HSS knives installed in Minimax FS 41ES-T\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 41ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 41ES-T four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (LED readout or control area):\n  \"FS 41ES powered planer bed movement with LED digital height readout to 0.1mm resolution\"\n\n  Image 7 (changeover \/ table lift):\n  \"Minimax FS 41ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43786153984217,"sku":"FS41ES-T-3ph","price":14275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/FS41ES-X-1_e47ca8ff-764e-4549-b52a-9c6f1e4147ac.jpg?v=1677097047"},{"product_id":"scm-minimax-fs-41es-tersa-16-inch-jointer-planer-1ph-230v","title":"SCM Minimax FS 41ES - Tersa 16\" Jointer\/Planer - 1PH, 230V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 41ES-T (1-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 41ES-T | 16\" Jointer\/Planer, 1-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  95mm Tersa cutterhead, 87\" parallelogram tables, single-lever\n  changeover, 4.8hp single-phase. Freight included; forklift or\n  terminal pickup required.\n  (151 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe ES is where the Minimax jointer\/planer lineup makes a structural leap: true parallelogram tables, powered planer bed movement, and a changeover that requires removing nothing — all on a 230V, 30A circuit. At 87\" of jointer bed and a full 16\" working width, this machine handles what serious hobbyists and small professional shops actually need without asking you to run three-phase power to get there.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e87\" (2,200mm) jointer table, 16\" (410mm) working width:\u003c\/strong\u003e face-joint full-width furniture stock without a pre-rip pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95mm Tersa cutterhead:\u003c\/strong\u003e 4 double-sided HSS knives; self-index on installation and swap without tools in under a minute; preferred by furniture makers for final-pass surface quality\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue single-phase 4.8hp motor:\u003c\/strong\u003e 230V, 30A; not a three-phase motor run through a VFD, no phase converter required\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FS lineup runs Classic, Elite, and Elite S — and the ES isn't just an incremental step. It's a different mechanism underneath. The Classic series runs separate jointer tables on a dovetail\/wedge adjustment system. The Elite improves that platform. The Elite S connects both tables mechanically on a true parallelogram with eight cam adjustment points, four per table. Both tables unlock simultaneously with a single lever and open away from the operator at 90°. Independently, the parallelogram mechanism keeps both jointer tables coplanar through the full range of jointing height adjustment. On a wedge-adjusted machine, any height change can shift that relationship, requiring you to verify both surfaces before running stock. On the ES, the geometry is maintained by the mechanism itself.\u003c\/p\u003e\n\u003cp\u003eThe changeover sequence on the ES is worth understanding against competing machines. On Felder and Hammer combination machines, the planer table must travel all the way down before you can switch functions. On every Minimax, including the Classic, only mid-travel is required. The ES removes two more steps: on the Classic, the fence and guard both come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between jointer and planer functions — the hose never gets repositioned.\u003c\/p\u003e\n\u003cp\u003eThe Tersa cutterhead runs four double-sided HSS knives on a 95mm-diameter body. The knives self-index on installation — drop them in, and they register to the correct cutting circle without setup. Swapping a full set takes under a minute without tools. Many furniture makers choose the Tersa specifically for final-pass jointing and planing, where surface quality on hardwoods is the priority. HSS knives produce a slightly different cut characteristic than carbide inserts, and for hand-finish-quality face-glue work, that distinction is real. If your priority is longevity in high-volume use, abrasive species, figured grain, or reclaimed material, look at the FS 41ES-X with the Xylent spiral cutterhead — 66 carbide inserts with four usable cutting edges each.\u003c\/p\u003e\n\u003cp\u003eThe planer table rides on four trapezoidal-threaded columns, each sealed against dust intrusion. Powered bed movement handles height positioning, with a digital LED readout showing position to 0.1mm. Two feed speeds give you 23 fpm for heavier cuts, thicker stock removal, and finish passes, and 46 fpm for moving dimension stock through quickly. The infeed roller is helicoidal steel for consistent grip across the full working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eAt 1,285 lbs., this machine is built for long-term stability. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 41ES and the FS 41E?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree structural changes. First, the ES uses a parallelogram table mechanism with 8 cam points instead of the FS 41E's dovetail\/wedge system — both tables are mechanically connected and stay coplanar at every jointing height setting without requiring re-verification. Second, the ES changeover requires removing neither the fence nor the guard; on the E, the fence stays in place but the guard needs to come off. Third, the ES planer table rides on four trapezoidal-threaded, dust-protected columns, and powered planer bed movement with an LED digital readout is standard on all ES configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Tersa and Xylent cutterheads?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe right choice depends on how the machine gets used. The Tersa (this machine) uses four double-sided HSS knives on a 95mm cutterhead — they self-index on installation and swap without tools in under a minute. Many furniture makers choose the Tersa for its surface quality on final-pass jointing and planing of hardwoods. The FS 41ES-X runs 66 carbide inserts with four usable cutting edges per insert — rotate three times, then replace. Carbide outlasts HSS significantly in high-volume use and holds up better on abrasive species, figured grain, and reclaimed material. For a shop running the machine daily or processing difficult stock, the Xylent's longevity and reduced noise are the meaningful advantages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat knife alloy should I choose?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFour alloy options are available. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-cr-chrome-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (CR) Chrome Steel Reversible Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eCR Chrome Steel\u003c\/a\u003e is the most economical — a practical choice for shops processing dirty or rough stock, as the softer alloy is less prone to chipping on grit or embedded debris. CR knives are also useful as a dedicated cleaning set: run them through dirty material first, then swap to a higher-grade alloy for finish jointing. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-hss-high-speed-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (HSS) High-Speed Steel Reversible Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eHSS\u003c\/a\u003e is the most popular option and handles the majority of softwood and open-grained hardwood work — pine, cedar, oak, walnut, cherry. For dense closed-cell hardwoods (maple, alder, birch, hickory, ash), \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-m-m42-high-speed-steel-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (M+) M42 High-Speed Steel Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eM42 Cobalt\u003c\/a\u003e is the better choice: same alloy family as HSS but with additional cobalt content and a modified cutting angle that holds up better on tougher stock and is less prone to chipping. \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/tersa-tungsten-carbide-reversible-jointer-planer-knives\" target=\"_blank\" title=\"Tersa (TC) Tungsten Carbide Jointer\/Planer Knives (2 Pack) product page\" rel=\"noopener\"\u003eTungsten Carbide\u003c\/a\u003e is the highest-performing option — nearly twice as dense and stiff as steel, with edge life that significantly outlasts any HSS alloy. It handles all hardwoods, exotic species, and stock with glue lines, but comes at a significant price premium over HSS and M42. For most shops, HSS or M42 covers the majority of work; carbide makes sense where exotic species or glue-line jointing are routine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require a phase converter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Some combination machines in this category use a three-phase motor run through a VFD to operate on single-phase power, which derates the motor's actual output. This machine runs a purpose-built 4.8hp single-phase motor on 230V — no phase converter, no VFD. You need a dedicated 30A, 240V circuit. If you have three-phase power available, the FS 41ES-T is also offered with an 8hp, 220V three-phase motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the ES compared to other Minimax models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ES is the simplest changeover of any machine in the C, E, and ES families. On the Classic series, the fence and guard both need to come off before switching. On the Elite, the fence stays but the guard comes off. On the ES, the guard stays in place and the fence moves to the operator-side position — it does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 41ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 41ES-T eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 41ES-T qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"https:\/\/www.oaktreesupply.com\/pages\/section-179\" target=\"_blank\" title=\"Section 179 Tax Break\" rel=\"noopener\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTersa cutterhead:\u003c\/strong\u003e 95mm diameter, 4 double-sided HSS knives. Knives self-index on installation — no setup, no tools required. Full knife change in under a minute. Preferred by furniture makers for final-pass surface quality on hardwoods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 16.125\" × 30.5\" (410 × 775mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrue single-phase motor:\u003c\/strong\u003e 4.8hp, 230V. Some competing combination machines use a three-phase motor derated through a VFD to run on single-phase power, which reduces actual output. This is a purpose-built single-phase motor. No VFD, no phase converter. Dedicated 30A circuit required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo feed speeds:\u003c\/strong\u003e 23 fpm for heavier cuts, thicker stock removal, and finish passes; 46 fpm for moving dimension stock through quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 41 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e16\" (410mm)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e87\" (2,200mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e95mm (3.74\")\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut:\u003c\/strong\u003e 0.1875\"\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size:\u003c\/strong\u003e 16.125\" × 30.5\" (410 × 775mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.44\" (240mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.125\" (3mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e1\/8\"\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e23 fpm \/ 46 fpm\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller:\u003c\/strong\u003e Rubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e4.8hp, 230V, single-phase\u003cbr\u003e\u003cstrong\u003eRecommended Circuit: \u003c\/strong\u003e30A dedicated\u003cbr\u003e\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 1,285 lbs.\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eTersa cutterhead (installed) with 4 double-sided HSS knives\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 41ES-T 16-inch jointer planer combination machine, 1-phase 230V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 41ES-T dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail or angle shot):\n  \"Tersa 95mm cutterhead with 4 double-sided HSS knives installed in Minimax FS 41ES-T\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 41ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 41ES-T four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (LED readout or control area):\n  \"FS 41ES powered planer bed movement with LED digital height readout to 0.1mm resolution\"\n\n  Image 7 (changeover \/ table lift):\n  \"Minimax FS 41ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":43794850808025,"sku":"FS41ES-T-1ph","price":14875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/FS41ES-T-1.jpg?v=1677525293"},{"product_id":"jet-jpj-12b-12-planer-jointer-3hp-1ph-230v","title":"JET JPJ-12B 12\" Straight Knife Jointer\/Planer 3hp, 1PH, 230V","description":"\u003cp\u003eYou don't have to choose between buying a jointer or a planer. With the JPJ-12B, you can have both. This versatile machine features an extra-large aluminum extruded fence with centered controls for quick adjustments, a built-in dust chute capable of handling both planing and jointing operations, and a powerful 3-horsepower motor that can handle the toughest lumber.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA heavy-duty, fully welded steel base cabinet houses the motor and the planer table mechanism, while providing solid mounting for the associated controls and support for the jointer table and fence assemblies. Best of all, the fence can stay put when changing over functions.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely quick changeover between jointing and planing functions - fence does not need to be removed\u003c\/li\u003e\n\u003cli\u003eHeavy-duty cast iron tables with a ground finish to ensure accuracy and flatness\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability\u003c\/li\u003e\n\u003cli\u003eLarge handwheel for quick and precise adjustments of planer table\u003c\/li\u003e\n\u003cli\u003eParallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments\u003c\/li\u003e\n\u003cli\u003e(3) Precision-balanced high-speed steel knives ensure quality cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCuts Per Minute:\u003c\/strong\u003e 15,900\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 2-3\/4\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,300 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Min. Required:\u003c\/strong\u003e 550 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eFeed Rate - Planing (FPM):\u003c\/strong\u003e 2 speed 16 to 26 FPM\u003cbr\u003e\u003cstrong\u003eFence Positive Stops:\u003c\/strong\u003e 90° and 45° R\u003cbr\u003e\u003cstrong\u003eFence Size (L x H):\u003c\/strong\u003e 43-1\/4\" x 5-7\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFence Tilt:\u003c\/strong\u003e 90° to 45° R\u003cbr\u003e\u003cstrong\u003eJointer Cutting Capacity (W x D):\u003c\/strong\u003e 12\u003cspan\u003e\"\u003c\/span\u003e x 1\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eJointer Table Size (L x W):\u003c\/strong\u003e 55\u003cspan\u003e\"\u003c\/span\u003e x 12-1\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut - Planing:\u003c\/strong\u003e 5\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e 8-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e 12\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e 10\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 3hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 453 lbs.\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e 3\u003cbr\u003e\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e 55-7\/16\u003cspan\u003e\"\u003c\/span\u003e x 28-15\/16\u003cspan\u003e\"\u003c\/span\u003e x 40\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlaner Cutting Capacity (W x D):\u003c\/strong\u003e 12\u003cspan\u003e\"\u003c\/span\u003e x 8-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlaner Table Size (L x W):\u003c\/strong\u003e 25\u003cspan\u003e\"\u003c\/span\u003e X 12-1\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e 230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e 30 Amps\u003cbr\u003e\u003cstrong\u003eStandard Knife Size (L x W x T):\u003c\/strong\u003e 12-3\/16\u003cspan\u003e\"\u003c\/span\u003e x 11\/16\u003cspan\u003e\"\u003c\/span\u003e x 1\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e 15\u003cbr\u003e\u003cstrong\u003eRunning Amps:\u003c\/strong\u003e 4.5\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":43968138412249,"sku":"JT9-715100","price":4685.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/715100-1.jpg?v=1748882521"},{"product_id":"jet-jpj-12bhh-12-planer-jointer-helical-cutterhead-3hp-1ph-230v","title":"JET JPJ-12BHH 12\" Helical Head Jointer\/Planer 3hp, 1PH, 230V","description":"\u003cp\u003eYou don't have to choose between buying a jointer or a planer. With the JPJ-12B, you can have both. This versatile machine features an extra-large aluminum extruded fence with centered controls for quick adjustments, a built-in dust chute capable of handling both planing and jointing operations, and a powerful 3-horsepower motor that can handle the toughest lumber.\u003c\/p\u003e\n\u003cp\u003eA heavy-duty, fully welded steel base cabinet houses the motor and the planer table mechanism, while providing solid mounting for the associated controls and support for the jointer table and fence assemblies. Best of all, the fence can stay put when changing over functions.\u003c\/p\u003e\n\u003cp\u003eJET warrants every product they sell against manufacturer's defects. All JET Woodworking Machinery carry a 5-Year Warranty from date of purchase. Woodworking products with a 5-Year Warranty that are used for commercial or industrial purposes default to a 2-Year Warranty. Warranties are subject to JET's terms and conditions.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely quick changeover between jointing and planing functions. Fence does not need to be removed\u003c\/li\u003e\n\u003cli\u003eHeavy-duty cast iron tables with a ground finish to ensure accuracy and flatness\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, one-piece steel closed stand includes mounting tabs for increased stability\u003c\/li\u003e\n\u003cli\u003eLarge handwheel for quick and precise adjustments of planer table\u003c\/li\u003e\n\u003cli\u003eParallelogram design keeps the table close to the cutterhead for improved finish and allows for precise depth of cut adjustments\u003c\/li\u003e\n\u003cli\u003e(42) 4-sided carbide insert cutterhead provides a superior shearing cut than a straight cut could tackle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2-3\/4\"\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5,300 RPM\u003cbr\u003e\u003cstrong\u003eDust Collection Min. Required:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e550 CFM\u003cbr\u003e\u003cstrong\u003eDust Port Outside Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\"\u003cbr\u003e\u003cstrong\u003eFeed Rate - Planing (FPM):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 speed 16 to 26 FPM\u003cbr\u003e\u003cstrong\u003eFence Positive Stops:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e90° and 45° R\u003cbr\u003e\u003cstrong\u003eFence Size (L x H):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e43-1\/4\" x 5-7\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFence Tilt:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e90° to 45° R\u003cbr\u003e\u003cstrong\u003eJointer Cutting Capacity (W x D):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e12\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 1\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eJointer Table Size (L x W):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e55\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 12-1\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut - Planing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Planing Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e12\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMin. Planing Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e10\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Power:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3hp\u003cbr\u003e\u003cstrong\u003eMotor Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e230V\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e453 lbs.\u003cbr\u003e\u003cstrong\u003eNumber of Knives:\u003c\/strong\u003e\u003cspan\u003e 42 four-sided inserts\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Dimensions (L x W x H):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e55-7\/16\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 28-15\/16\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 40\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Height:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlaner Cutting Capacity (W x D):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e12\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 8-3\/4\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlaner Table Size (L x W):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e25\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eX 12-1\/32\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePrewired Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e230V\u003cbr\u003e\u003cstrong\u003eRecommended Circuit Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e30 Amps\u003cbr\u003e\u003cstrong\u003eStandard Knife Size (L x W x T):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e12-3\/16\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 11\/16\u003cspan\u003e\"\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ex 1\/8\u003cspan\u003e\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eType of Cutterhead:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStraight Knife\u003cbr\u003e\u003cstrong\u003eFull Load Amps:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e15\u003cbr\u003e\u003cstrong\u003eRunning Amps:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4.5\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Jet","offers":[{"title":"Default Title","offer_id":43968145457369,"sku":"JT9-715155","price":6489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/715155-1.jpg?v=1748882520"},{"product_id":"scm-minimax-fs-52es-xylent-20-jointer-planer-single-phase","title":"SCM Minimax FS 52ES - Xylent 20\" Jointer\/Planer - 1PH, 230V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 52ES-X (1-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 52ES-X | 20\" Jointer\/Planer, 1-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  120mm Xylent cutterhead, 88.56\" parallelogram tables, 4-speed\n  planer, 4.8hp single-phase. Freight included; forklift or\n  terminal pickup required.\n  (151 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe FS 52ES is the 20\" Elite S — connected parallelogram tables, single-lever changeover, and a 4-post planer bed in a 520mm working width. If you're regularly processing wide slabs, full-width panels, or solid stock that won't fit through a 16\" machine, this is the machine built for it. It runs on a 230V single-phase circuit.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e88.56\" (2,250mm) jointer table, 20.44\" (520mm) working width:\u003c\/strong\u003e face-joint wide slabs and full-width panels in a single pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120mm Xylent spiral cutterhead:\u003c\/strong\u003e 84 carbide inserts across 3 rows, each with 4 cutting edges; rotate three times before replacing; measurably quieter than straight-knife heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour planer feed speeds:\u003c\/strong\u003e 16, 26, 39, and 59 fpm — run rough stock through fast to remove material quickly, dial back to a precision speed for finish passes\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue single-phase 4.8hp motor:\u003c\/strong\u003e 230V, 30A; not a three-phase motor run through a VFD, no phase converter required\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Elite S designation brings two structural features that define this machine. The jointer tables are connected on a true parallelogram mechanism — eight cam points, four per table, keep both tables coplanar through the full range of jointing height adjustment. There is no re-verification step after changing jointing height; the geometry is maintained by the mechanism itself. Both tables unlock with a single lever and open away from the operator at 90°. The changeover requires removing neither the fence nor the guard — the guard stays in place, the fence moves to the operator-side position, and the dust port floats between jointer and planer functions without being repositioned. The planer table rides on four trapezoidal-threaded, dust-protected columns with powered bed movement and a digital LED readout to 0.1mm resolution.\u003c\/p\u003e\n\u003cp\u003eThe Xylent cutterhead runs 84 carbide inserts across a 120mm-diameter body in three rows. Each 15×15×2.5mm insert has four usable cutting edges — rotate three times before replacing. Spiral geometry shears at an angle rather than cutting head-on, which reduces operational noise and produces fine chips that are easier on your dust collection system. At 84 insert seats, maintenance discipline matters — each seat needs to be cleaned individually before rotating inserts to a fresh cutting edge. The Xylent Maintenance Kit is the right tool for that job and should be considered a required accessory for this machine.\u003c\/p\u003e\n\u003cp\u003eThe four planer feed speeds reflect how thicknessing work actually gets done. Rough stock comes off the saw with variability across its face — you're removing material unevenly until the board evens out, and running faster through those early passes is the efficient approach. The 39 and 59 fpm speeds handle that initial stock removal well. Once the board is consistent and you're working toward final thickness, dropping to 16 or 26 fpm gives you a cleaner surface with less tearout on demanding grain. Two precision speeds and two production speeds gives you the right setting for each stage rather than splitting the difference with a single middle speed.\u003c\/p\u003e\n\u003cp\u003eThe planer table is 20.44\" × 33.46\" — wide enough to support full-width stock through the full depth of cut. The infeed roller is helicoidal steel for consistent grip across the working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eThis machine is heavier than the FS 41ES. Due to its weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 52ES and the FS 41ES?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference is working width — 20.44\" on the 52ES versus 16\" on the FS 41ES. The cutterblock grows from 95mm to 120mm in diameter and from 66 to 84 carbide inserts to span the wider cutting width. The 52ES also adds two additional planer feed speeds — four total (16\/26\/39\/59 fpm) versus two on the 41ES — and includes automatic star-delta start as standard. The parallelogram table system, single-lever changeover, 4-post planer bed, and powered planer bed movement are mechanically identical between the two machines. The 52ES ships in Xylent configuration only as a stocked machine; a Tersa option is available as a factory order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a Tersa cutterhead version available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot as a stocked machine. The FS 52ES ships in Xylent configuration only through standard inventory. A Tersa version is available as a factory order through SCM, but lead time is several months from Italy. If the Tersa is important to your workflow, contact us before ordering so we can get accurate lead time information from SCM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require a phase converter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Some combination machines in this category use a three-phase motor run through a VFD to operate on single-phase power, which derates the motor's actual output. This machine runs a purpose-built 4.8hp single-phase motor on 230V — no phase converter, no VFD. You need a dedicated 30A, 240V circuit. If you have three-phase power available, the FS 52ES-X is also offered with an 11hp, 220V three-phase motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned. The Xylent cutterhead produces finer chips than a straight-knife head, which improves extraction efficiency at the same CFM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the FS 52ES?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeither the jointer fence nor the guard needs to be removed. The guard stays in place and the fence moves to the operator-side position. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 52ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 52 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 52ES-X eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 52ES-X qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"https:\/\/www.oaktreesupply.com\/pages\/section-179\" target=\"_blank\" title=\"Section 179 Tax Break page\" rel=\"noopener\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXylent spiral cutterhead:\u003c\/strong\u003e 120mm diameter, 84 carbide inserts across 3 rows of 15×15×2.5mm. Each insert has four cutting edges — rotate three times before replacing. Spiral geometry reduces noise and produces fine chips for better dust collection performance. Dynamometric key included for correct insert torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 20.44\" × 33.46\" (520 × 850mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour planer feed speeds:\u003c\/strong\u003e 16, 26, 39, and 59 fpm. Run rough stock at higher speeds during initial material removal; drop to a precision speed for finish passes on demanding grain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic star-delta start:\u003c\/strong\u003e Standard on the FS 52ES. Reduces inrush current at startup for smoother motor engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrue single-phase motor:\u003c\/strong\u003e 4.8hp, 230V. Some competing combination machines use a three-phase motor derated through a VFD to run on single-phase power, which reduces actual output. This is a purpose-built single-phase motor. No VFD, no phase converter. Dedicated 30A circuit required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 52 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e20.44\" (520mm)\u003cbr\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e88.56\" (2,250mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e120mm (4.69\")\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut: \u003c\/strong\u003e5mm (0.19\")\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size: \u003c\/strong\u003e20.44\" × 33.46\" (520 × 850mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.0\" (230mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.12\" (3mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Length: \u003c\/strong\u003e8.62\" (220mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e5mm (0.19\")\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e16 \/ 26 \/ 39 \/ 59 fpm (4 speeds)\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller: \u003c\/strong\u003eRubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e4.8hp, 230V, single-phase\u003cbr\u003e\u003cstrong\u003eRecommended Circuit: \u003c\/strong\u003e30A dedicated\u003cbr\u003e\u003cstrong\u003eDust Port Diameter: \u003c\/strong\u003e4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eXylent spiral cutterhead (installed) with dynamometric key\u003c\/li\u003e\n\u003cli\u003e10 spare carbide inserts (15×15×2.5mm)\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 52ES-X 20-inch jointer planer combination machine, 1-phase 230V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 52ES-X dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail):\n  \"Xylent 120mm spiral cutterhead with 84 carbide inserts installed in Minimax FS 52ES-X\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 52ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 52ES-X four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (changeover \/ table lift):\n  \"Minimax FS 52ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45561713590489,"sku":"FS52ES-X-1ph","price":20475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/52ES-1.jpg?v=1677602601"},{"product_id":"scm-minimax-fs-52es-xylent-20-jointer-planer-single-phase-1","title":"SCM Minimax FS 52ES - Xylent 20\" Jointer\/Planer - 3PH, 220V","description":"\u003c!-- ============================================================\n     OAKTREE SUPPLY — MINIMAX FS 52ES-X (3-PHASE)\n     FINAL PUBLISH-READY COPY\n     ============================================================ --\u003e\u003c!-- ── UPDATE IN SHOPIFY \u003e EDIT SEO ──────────────────────────\n\n  PAGE TITLE:\n  Minimax FS 52ES-X | 20\" Jointer\/Planer, 3-Phase | OakTree Supply\n  (58 characters)\n\n  META DESCRIPTION:\n  120mm Xylent cutterhead, 88.56\" parallelogram tables, 4-speed\n  planer, 11hp three-phase. Freight included; forklift or\n  terminal pickup required.\n  (150 characters)\n\n─────────────────────────────────────────────────────────────── --\u003e\u003c!-- ══════════════════════════════════════════\n     HOOK\n════════════════════════════════════════════ --\u003e\n\u003cp\u003eThe FS 52ES is the 20\" Elite S — connected parallelogram tables, single-lever changeover, and a 4-post planer bed in a 520mm working width. The 3-phase configuration pairs that platform with an 11hp motor for shops running this machine hard on wide stock. If you're regularly processing wide slabs, full-width panels, or solid stock that won't fit through a 16\" machine, this is the machine built for it.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     AT A GLANCE\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e88.56\" (2,250mm) jointer table, 20.44\" (520mm) working width:\u003c\/strong\u003e face-joint wide slabs and full-width panels in a single pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue parallelogram table system:\u003c\/strong\u003e 8 cam points keep both jointer tables coplanar at every jointing height setting; re-verification after adjustment is not necessary in normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e no fence removal, no guard removal, both tables unlock and lift simultaneously; dust hose stays connected throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120mm Xylent spiral cutterhead:\u003c\/strong\u003e 84 carbide inserts across 3 rows, each with 4 cutting edges; rotate three times before replacing; measurably quieter than straight-knife heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour planer feed speeds:\u003c\/strong\u003e 16, 26, 39, and 59 fpm — run rough stock through fast to remove material quickly, dial back to a precision speed for finish passes\u003c\/li\u003e\n\u003cli\u003ePowered planer bed movement with LED digital readout to 0.1mm resolution\u003c\/li\u003e\n\u003cli\u003e4-post planer table on dust-protected trapezoidal-threaded columns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11hp three-phase motor:\u003c\/strong\u003e 220V; requires three-phase power — no VFD, no phase converter\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     THE DETAILS\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Elite S designation brings two structural features that define this machine. The jointer tables are connected on a true parallelogram mechanism — eight cam points, four per table, keep both tables coplanar through the full range of jointing height adjustment. There is no re-verification step after changing jointing height; the geometry is maintained by the mechanism itself. Both tables unlock with a single lever and open away from the operator at 90°. The changeover requires removing neither the fence nor the guard — the guard stays in place, the fence moves to the operator-side position, and the dust port floats between jointer and planer functions without being repositioned. The planer table rides on four trapezoidal-threaded, dust-protected columns with powered bed movement and a digital LED readout to 0.1mm resolution.\u003c\/p\u003e\n\u003cp\u003eThe Xylent cutterhead runs 84 carbide inserts across a 120mm-diameter body in three rows. Each 15×15×2.5mm insert has four usable cutting edges — rotate three times before replacing. Spiral geometry shears at an angle rather than cutting head-on, which reduces operational noise and produces fine chips that are easier on your dust collection system. At 84 insert seats, maintenance discipline matters — each seat needs to be cleaned individually before rotating inserts to a fresh cutting edge. The Xylent Maintenance Kit is the right tool for that job and should be considered a required accessory for this machine.\u003c\/p\u003e\n\u003cp\u003eThe four planer feed speeds reflect how thicknessing work actually gets done. Rough stock comes off the saw with variability across its face — you're removing material unevenly until the board evens out, and running faster through those early passes is the efficient approach. The 39 and 59 fpm speeds handle that initial stock removal well. Once the board is consistent and you're working toward final thickness, dropping to 16 or 26 fpm gives you a cleaner surface with less tearout on demanding grain. Two precision speeds and two production speeds gives you the right setting for each stage rather than splitting the difference with a single middle speed.\u003c\/p\u003e\n\u003cp\u003eThe 11hp motor is the full production specification for this machine. It runs on 220V three-phase power — a purpose-built three-phase motor, not a single-phase motor with a VFD bolted on. At 25A draw, the electrical demand is modest for a three-phase circuit; a 30A breaker is recommended. If you have three-phase power in your shop, this is the configuration to run. If you're on single-phase only, the FS 52ES-X 1-phase runs a 4.8hp single-phase motor on a 230V, 30A circuit and does not require a phase converter.\u003c\/p\u003e\n\u003cp\u003eThe planer table is 20.44\" × 33.46\" — wide enough to support full-width stock through the full depth of cut. The infeed roller is helicoidal steel for consistent grip across the working width; the outfeed roller is rubber-coated for clean release without marring the finished surface.\u003c\/p\u003e\n\u003cp\u003eThis machine is heavier than the FS 41ES. Due to its weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     FEATURES\n════════════════════════════════════════════ --\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the FS 52ES and the FS 41ES?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe primary difference is working width — 20.44\" on the 52ES versus 16\" on the FS 41ES. The cutterblock grows from 95mm to 120mm in diameter and from 66 to 84 carbide inserts to span the wider cutting width. The 52ES also adds two additional planer feed speeds — four total (16\/26\/39\/59 fpm) versus two on the 41ES — and includes automatic star-delta start as standard. The parallelogram table system, single-lever changeover, 4-post planer bed, and powered planer bed movement are mechanically identical between the two machines. The 52ES ships in Xylent configuration only as a stocked machine; a Tersa option is available as a factory order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a Tersa cutterhead version available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNot as a stocked machine. The FS 52ES ships in Xylent configuration only through standard inventory. A Tersa version is available as a factory order through SCM, but lead time is several months from Italy. If the Tersa is important to your workflow, contact us before ordering so we can get accurate lead time information from SCM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require three-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. This is a purpose-built 11hp three-phase motor running on 220V. It requires a three-phase electrical service — no VFD or phase converter will be used. At 25A draw, the electrical demand is modest for a three-phase circuit; a 30A breaker is recommended. If you have single-phase power only, the FS 52ES-X 1-phase runs a 4.8hp single-phase motor on a dedicated 230V, 30A circuit and does not require a phase converter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection does this machine require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMinimum 600 CFM through a single 4.7\" (120mm) port. The port stays on the same side of the machine and floats between jointer and planer functions without being repositioned. The Xylent cutterhead produces finer chips than a straight-knife head, which improves extraction efficiency at the same CFM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does changeover work on the FS 52ES?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNeither the jointer fence nor the guard needs to be removed. The guard stays in place and the fence moves to the operator-side position. Both tables unlock with a single lever and open away from the operator at 90°. The dust hose stays where it is. If you're comparing against Felder or Hammer, note that those machines require the planer table to travel all the way down before switching functions. On every Minimax — including the Classic — mid-travel is sufficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a mortiser to this machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The FS 52ES ships with the mortising table pre-setting already installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 52 family. The mortising chuck is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the listed price include shipping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, shipping is free. Due to the machine's weight and dimensions, liftgate delivery is not a safe option — you will need either a forklift available on site or the ability to pick up from a local freight terminal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs business financing available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. OakTree has partnered with First Citizens Equipment Finance to offer business financing on qualifying purchases. Financing is available to established businesses and can be applied for directly from any qualifying product page — look for the monthly payment estimate below the Add to Cart button and click through to submit a pre-approval application. If approved, a First Citizens representative will follow up to discuss payment terms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Minimax FS 52ES-X eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The Minimax FS 52ES-X qualifies as a capital equipment purchase under Section 179, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. \u003ca href=\"https:\/\/www.oaktreesupply.com\/pages\/section-179\" target=\"_blank\" title=\"Section 179 Tax Break page\" rel=\"noopener\"\u003eSee how much you could save with our Section 179 calculator.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram jointer tables:\u003c\/strong\u003e Infeed and outfeed tables connect mechanically and unlock simultaneously with a single lever. Eight cam points — four per table — maintain coplanarity through the full range of jointing height adjustment. Re-verification after height changes is not necessary in normal use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXylent spiral cutterhead:\u003c\/strong\u003e 120mm diameter, 84 carbide inserts across 3 rows of 15×15×2.5mm. Each insert has four cutting edges — rotate three times before replacing. Spiral geometry reduces noise and produces fine chips for better dust collection performance. Dynamometric key included for correct insert torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle-lever changeover:\u003c\/strong\u003e The guard stays in place. The fence moves to the operator-side position but does not need to be removed. Both tables unlock with a single lever and open away from the operator at 90°. The dust port stays on the same side of the machine and floats between functions — the hose does not move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4-post planer table:\u003c\/strong\u003e Four dust-protected trapezoidal-threaded columns provide long-term dimensional stability under daily use. Planer table size: 20.44\" × 33.46\" (520 × 850mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered planer bed movement:\u003c\/strong\u003e LED digital readout displays table height to 0.1mm resolution. Accurate height setting without a handwheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour planer feed speeds:\u003c\/strong\u003e 16, 26, 39, and 59 fpm. Run rough stock at higher speeds during initial material removal; drop to a precision speed for finish passes on demanding grain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic star-delta start:\u003c\/strong\u003e Standard on the FS 52ES. Reduces inrush current at startup for smoother motor engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJointer fence:\u003c\/strong\u003e 1,200mm × 150mm, center-mounted directly over the cutterhead via a rigid round-bar support. Tilts 0°–45°. Additional overturning fence included for thin workpieces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11hp three-phase motor:\u003c\/strong\u003e 220V, purpose-built three-phase. No VFD, no phase converter. 25A draw; 30A breaker recommended. Requires three-phase electrical service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOSHA-compliant spring guard:\u003c\/strong\u003e American-style spring guard ships standard. Always covers the unused portion of the cutterhead without requiring manual repositioning when the fence moves. A European-style guard is available as an accessory through OakTree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMortising table pre-setting:\u003c\/strong\u003e Ships with mortising table pre-setting installed. The 0–16mm self-centering chuck attaches directly and is compatible with the FS 52 family. Mortising chuck available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMobility kit:\u003c\/strong\u003e Wheels included standard.\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     SPEC TABLE\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJointer\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eWorking Width: \u003c\/strong\u003e20.44\" (520mm)\u003cbr\u003e\u003cstrong\u003eOverall Table Length: \u003c\/strong\u003e88.56\" (2,250mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter: \u003c\/strong\u003e120mm (4.69\")\u003cbr\u003e\u003cstrong\u003eMax. Depth of Cut: \u003c\/strong\u003e5mm (0.19\")\u003cbr\u003e\u003cstrong\u003eFence Tilt: \u003c\/strong\u003e0°–45°\u003cbr\u003e\u003cstrong\u003eFence Dimensions: \u003c\/strong\u003e1,200mm × 150mm (47.2\" × 5.9\")\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlaner (Thicknesser)\u003cbr\u003ePlaner Table Size: \u003c\/strong\u003e20.44\" × 33.46\" (520 × 850mm)\u003cbr\u003e\u003cstrong\u003eMax. Working Thickness: \u003c\/strong\u003e9.0\" (230mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Thickness: \u003c\/strong\u003e0.12\" (3mm)\u003cbr\u003e\u003cstrong\u003eMin. Working Length: \u003c\/strong\u003e8.62\" (220mm)\u003cbr\u003e\u003cstrong\u003eMax. Stock Removal: \u003c\/strong\u003e5mm (0.19\")\u003cbr\u003e\u003cstrong\u003eFeed Speeds: \u003c\/strong\u003e16 \/ 26 \/ 39 \/ 59 fpm (4 speeds)\u003cbr\u003e\u003cstrong\u003eInfeed Roller: \u003c\/strong\u003eHelicoidal steel\u003cbr\u003e\u003cstrong\u003eOutfeed Roller: \u003c\/strong\u003eRubber-coated\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical \u0026amp; Dust\u003cbr\u003eMotor: \u003c\/strong\u003e11hp, 220V, three-phase\u003cbr\u003e\u003cstrong\u003eRecommended Circuit: \u003c\/strong\u003e30A (25A draw)\u003cbr\u003e\u003cstrong\u003eDust Port Diameter: \u003c\/strong\u003e4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eMinimum CFM Required: \u003c\/strong\u003e600 CFM\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     INCLUDES\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eXylent spiral cutterhead (installed) with dynamometric key\u003c\/li\u003e\n\u003cli\u003e10 spare carbide inserts (15×15×2.5mm)\u003c\/li\u003e\n\u003cli\u003eJointer fence (1,200mm × 150mm) with center-mount round-bar support\u003c\/li\u003e\n\u003cli\u003eAdditional overturning fence for thin workpieces\u003c\/li\u003e\n\u003cli\u003eOSHA-compliant American spring guard\u003c\/li\u003e\n\u003cli\u003eMobility kit (wheels)\u003c\/li\u003e\n\u003cli\u003eTool set and operator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- ══════════════════════════════════════════\n     FAQ\n     Add FAQ schema markup via JSON-LD in\n     your Shopify theme or a script tag.\n════════════════════════════════════════════ --\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Items being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]: \u003c\/strong\u003eThe machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e\n\u003c!-- ══════════════════════════════════════════\n     ALT TEXT — UPDATE IN SHOPIFY MEDIA PANEL\n════════════════════════════════════════════ --\u003e\u003c!--\n  Image 1 (hero, front 3\/4):\n  \"Minimax FS 52ES-X 20-inch jointer planer combination machine, 3-phase 220V, made in Italy\"\n\n  Image 2 (dimensions diagram):\n  \"Minimax FS 52ES-X dimensions diagram showing jointer table length and overall machine footprint\"\n\n  Image 3 (cutterhead detail):\n  \"Xylent 120mm spiral cutterhead with 84 carbide inserts installed in Minimax FS 52ES-X\"\n\n  Image 4 (fence and table):\n  \"Minimax FS 52ES center-mounted jointer fence on parallelogram table system, 1200mm x 150mm\"\n\n  Image 5 (planer bed \/ columns):\n  \"FS 52ES-X four-post planer table on dust-protected trapezoidal-threaded columns\"\n\n  Image 6 (changeover \/ table lift):\n  \"Minimax FS 52ES single-lever changeover with connected jointer tables opening simultaneously at 90 degrees\"\n--\u003e","brand":"SCM","offers":[{"title":"Default Title","offer_id":45561813434585,"sku":"FS52ES-X-3ph","price":19975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/52ES-3ph.jpg?v=1776906667"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/all-jointer-planer-combos\/type_jointer-planer-combo.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}