{"title":"All Handheld Joinery Accessories","description":"","products":[{"product_id":"domino-cutter-5mm-nl20-df500","title":"Festool Domino Cutter 5 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003c\/p\u003e\n\u003cp\u003e5 mm DOMINO Cutter for use with any \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/dominos-menu\" title=\"All dominos page\" target=\"_blank\"\u003e5 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 5mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eD:\u003c\/strong\u003e 7\/32\" (5 mm)\u003cbr\u003e\u003cstrong\u003eNL:\u003c\/strong\u003e 3\/4\" (20 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114050629,"sku":"493490","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/493490-1.jpg?v=1754021844"},{"product_id":"domino-cutter-6mm-nl28-df500","title":"Festool Domino Cutter 6 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e6 mm DOMINO Cutter for use with any \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/dominos-menu\" title=\"All dominos page\" target=\"_blank\"\u003e6 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 6 mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eD:\u003c\/strong\u003e 1\/4\" (6 mm)\u003cbr\u003e\u003cstrong\u003eNL:\u003c\/strong\u003e 1-1\/8\" (28 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114050757,"sku":"493491","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/493491-1.jpg?v=1754021843"},{"product_id":"domino-cutter-8mm-nl28-df500","title":"Festool Domino Cutter 8 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003c\/p\u003e\n\u003cp\u003e8 mm DOMINO Cutter for use with any \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/dominos-menu\" title=\"All dominos page\" target=\"_blank\"\u003e8 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 8 mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD:\u003c\/strong\u003e 5\/16\" (8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNL:\u003c\/strong\u003e 1-1\/8\" (28 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114051013,"sku":"493492","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/493492-1.jpg?v=1754021842"},{"product_id":"domino-cutter-10mm-nl28-df500","title":"Festool Domino Cutter 10 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003c\/p\u003e\n\u003cp\u003e10 mm DOMINO Cutter for use with any \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/dominos-menu\" title=\"All dominos page\" target=\"_blank\"\u003e10 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 10 mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eD:\u003c\/strong\u003e 3\/8\" (10mm)\u003cbr\u003e\u003cstrong\u003eNL:\u003c\/strong\u003e 1-1\/8\" (28mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114051077,"sku":"493493","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/493493-1.jpg?v=1754021841"},{"product_id":"festool-beech-domino-tenons-5mm-x-30mm","title":"Festool Beech Domino Tenons 5mm x 30mm","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 500 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 5mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e5mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 5mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e30mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 19mm\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 5mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"300 Pack","offer_id":46265586909401,"sku":"494938","price":25.0,"currency_code":"USD","in_stock":true},{"title":"1800 Pack","offer_id":46264891998425,"sku":"493296","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494938-1.jpg?v=1754021840"},{"product_id":"festool-beech-domino-tenons-6mm-x-40mm","title":"Festool Beech Domino Tenons 6mm x 40mm","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 500 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 6mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e6mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 6mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e40mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 20mm\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 6mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"190 Pack","offer_id":46265584845017,"sku":"494939","price":25.0,"currency_code":"USD","in_stock":true},{"title":"1140 Pack","offer_id":46264892031193,"sku":"493297","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494939-1.jpg?v=1754021838"},{"product_id":"festool-beech-domino-tenons-8mm-x-40mm","title":"Festool Beech Domino Tenons 8mm x 40mm","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with both the \u003ca rel=\"noopener\" title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDF 500 and DF 700 Domino Joiners\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 8mm, so you would need to use an \u003ca rel=\"noopener\" title=\"All Domino Cutters\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" target=\"_blank\"\u003e8mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 8mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e40mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 8mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"130","offer_id":46265582878937,"sku":"494940","price":25.0,"currency_code":"USD","in_stock":false},{"title":"780","offer_id":46264892063961,"sku":"493298","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494940-1.jpg?v=1754021837"},{"product_id":"festool-beech-domino-tenons-8mm-x-50mm","title":"Festool Beech Domino Tenons 8mm x 50mm","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with both the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDF 500 and DF 700 Domino Joiners\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 8mm, so you would need to use an \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e8mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 8mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e50mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 8mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"100 Pack","offer_id":46265580486873,"sku":"494941","price":25.0,"currency_code":"USD","in_stock":false},{"title":"600 Pack","offer_id":46264892096729,"sku":"493299","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494941-1.jpg?v=1754021835"},{"product_id":"festool-beech-domino-tenons-4mm-x-20mm-450-pack","title":"Festool Beech Domino Tenons 4mm x 20mm (450 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 500 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 4mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e4mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 4mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 20mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 17mm\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 4mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114053189,"sku":"495661","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/495661-1.jpg?v=1754021829"},{"product_id":"domino-cutter-4mm-nl11-df500","title":"Festool Domino Cutter 4 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003c\/p\u003e\n\u003cp\u003e4 mm DOMINO Cutter for use with \u003ca title=\"Festool Beech Dominos (4 mm x 20 mm) product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/domino-beech-4x17x20mm-450x-sf500\" target=\"_blank\"\u003e4 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 4 mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eD:\u003c\/strong\u003e 5\/32\" (4 mm)\u003cbr\u003e\u003cstrong\u003eNL:\u003c\/strong\u003e 3\/8\" (11 mm)\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114053253,"sku":"495663","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/495663-1.jpg?v=1754021828"},{"product_id":"festool-domino-tenons-assortment-for-the-df-500","title":"Festool Domino Tenons Assortment for the DF 500","description":"\u003cp\u003eFor the Festool \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-domino-joiner-df-500-q-set\" target=\"_blank\" title=\"Festool Domino Joiner DF 500 Q Set product page\" rel=\"noopener\"\u003eDF 500 Domino Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlways have the right dominos and cutters on hand! This assortment Systainer not only provides convenient storage for all of your dominos, but it includes all 5 cutters that are compatible with the DF 500 as well as 1,060 assorted dominos. A great deal when you buy the set! \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFestool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The DOMINO Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(450) 4x20mm Tenons\u003c\/li\u003e\n\u003cli\u003e(225) 5x30mm Tenons\u003c\/li\u003e\n\u003cli\u003e(150) 6x40mm Tenons\u003c\/li\u003e\n\u003cli\u003e(100) 8x40mm Tenons\u003c\/li\u003e\n\u003cli\u003e(75) 8x50mm Tenons\u003c\/li\u003e\n\u003cli\u003e(60) 10x50mm Tenons\u003c\/li\u003e\n\u003cli\u003e(3) Plastic Removable Storage Bins with Dividers\u003c\/li\u003e\n\u003cli\u003e(1) 4mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 5mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 6mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 8mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 10mm Cutter\u003c\/li\u003e\n\u003cli\u003e(1) Systainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 15-1\/2\" x 11-1\/2\" x 6-1\/8\" (396mm x 296mm x 157.5mm)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":6114064453,"sku":"576794","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576794-bits.jpg?v=1754021814"},{"product_id":"festool-domino-xl-8-10-mm-tenons-assortment-for-the-df-700-joiner","title":"Festool DOMINO XL 8\/10 mm Tenons Assortment for the DF 700 Joiner","description":"\u003cp\u003eFor the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-domino-df-700-set\" target=\"_blank\" title=\"Festool Domino XL Joiner DF 700 EQ Set product page\" rel=\"noopener\"\u003eDF 700 Domino XL Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlways have the right dominos and cutters on hand! This assortment systainer not only provides convenient storage for all of your dominos, but it includes 2 cutters that are compatible with the DF 700 as well as 306 total XL Domino Tennons. A great deal when you buy the set! \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFestool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The DOMINO Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(50) 8 x 50 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(36) 8 x 80 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(36) 8 x 100 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(80) 10 x 50 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(52) 10 x 80 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(52) 10 x 100 mm Tenons\u003c\/li\u003e\n\u003cli\u003e(1) 8 mm Domino XL Cutter\u003c\/li\u003e\n\u003cli\u003e(1) 10 mm Domino XL Cutter\u003c\/li\u003e\n\u003cli\u003e(1) Systainer with \u003cspan\u003estorage compartments\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/KIE6Rnyssg0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":18429566789,"sku":"576791","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576791-bits.jpg?v=1754021756"},{"product_id":"festool-beech-domino-tenons-14mm-x-140mm-70-pack","title":"Festool Beech Domino Tenons 14mm x 140mm (70 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 700 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 14mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e14mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 14mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e14\u003cspan\u003e0mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e\u003cspan\u003e 28mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e 14mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":28451546953,"sku":"498219","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/498219.jpg?v=1754021732"},{"product_id":"df-700-tenon-assortment-12-14mm","title":"Festool DOMINO XL 12\/14 mm Tenons Assortment for the DF 700 Joiner","description":"\u003cp\u003eFor the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-domino-df-700-set\" target=\"_blank\" title=\"Festool Domino XL Joiner DF 700 EQ Set product page\" rel=\"noopener\"\u003eDF 700 Domino XL Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlways have the right dominos and cutters on hand!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFestool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The DOMINO Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(40) DOMINO dowel birch D 12 x 100 mm\u003c\/li\u003e\n\u003cli\u003e(40) DOMINO dowel birch D 12 x 140 mm\u003c\/li\u003e\n\u003cli\u003e(16) DOMINO dowel birch D 14 x 100 mm\u003c\/li\u003e\n\u003cli\u003e(32) DOMINO dowel birch D 14 x 140 mm\u003c\/li\u003e\n\u003cli\u003e(1) DOMINO XL cutter for size D14 tenons\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(1) Systainer with storage compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/KIE6Rnyssg0\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":44038656969,"sku":"576792","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/576792-bit.jpg?v=1754021716"},{"product_id":"domino-xl-mortise-cutter","title":"Festool Domino XL Mortise Cutter 8 mm","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" title=\"All Festool Domino Joiners\" target=\"_blank\"\u003eDOMINO DF 700 Joiner\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.\u003c\/p\u003e\n\u003cp\u003e8 mm DOMINO XL Cutter for use with any \u003ca title=\"All dominos page\" href=\"https:\/\/www.oaktreesupply.com\/collections\/dominos-menu\" target=\"_blank\"\u003e8 mm DOMINO tenons\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCarbide tipped bit - withstands 5,000 to 14,000 joints, depending on material\u003c\/li\u003e\n\u003cli\u003eSpiral flutes for clean cuts\u003c\/li\u003e\n\u003cli\u003eInternally threaded for quick, easy bit changes\u003c\/li\u003e\n\u003cli\u003eCreates perfect mortise width for Festool 8mm tenons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eD: \u003c\/strong\u003e5\/16\" (8 mm)\u003cbr\u003e\u003cstrong\u003eNL:\u003c\/strong\u003e 2\" (50 mm)\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":44040226249,"sku":"497868","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/497868-1.jpg?v=1754021715"},{"product_id":"festool-beech-domino-tenons-10mm-x-50mm","title":"Festool Beech Domino Tenons 10mm x 50mm","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with both the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDF 500 and DF 700 Domino Joiners\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 10mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e10mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 10mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e50\u003cspan\u003emm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e\u003cspan\u003e 24mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e\u003cspan\u003e 10mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"85 Pack","offer_id":46265520455897,"sku":"494942","price":25.0,"currency_code":"USD","in_stock":true},{"title":"510 Pack","offer_id":46264891965657,"sku":"493300","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494942-1_a131d018-8697-41e2-8d6e-9700e91941e2.jpg?v=1754021713"},{"product_id":"festool-beech-domino-tenons-12mm-x-100mm-100-pack","title":"Festool Beech Domino Tenons 12mm x 100mm (100 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDomino DF 700 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 12mm, so you would need to use a \u003ca rel=\"noopener\" title=\"All Domino Cutters\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" target=\"_blank\"\u003e12mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 12mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e100mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 26mm\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 12mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":44040446281,"sku":"498216","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/498215-1_ff7fcc79-8eb0-426a-820c-f43c65e23aa3.jpg?v=1754021712"},{"product_id":"festool-beech-domino-tenons-14mm-x-100mm-80-pack","title":"Festool Beech Domino Tenons 14mm x 100mm (80 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 700 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 14mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e14mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 14mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cul class=\"triangle__container\"\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e10\u003cspan\u003e0mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e\u003cspan\u003e 28mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e 14mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":44040500489,"sku":"498218","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/198218.jpg?v=1754021710"},{"product_id":"domino-xl-connector-systainer","title":"Festool XL DF 700 Domino Connector Set","description":"\u003cp\u003eFor use with the \u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\/brand_festool\" target=\"_blank\"\u003eDomino 700 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFestool Domino Connectors make creating knock-down joinery with the DF Domino Joiner extremely simple and fast. From corner joints to center panels to joints between a series of holes, Domino Connectors allow you to assemble, separate, and reassemble your workpieces for increased flexibility. If you want to use the Domino Joiner to create flat-pack furniture, cabinets, or modular desks, these connectors are an absolute must!\u003c\/p\u003e\n\u003cp\u003eA corner joint can be created with just two Domino-routed holes and one drilled hole. Center panel joints are produced in the same way, with the only difference being that a through hole is made in the center panel. The connector is then inserted through this hole, and the bases of the two workpieces can then be attached in the usual way.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable joining system enables seamless assembly and disassembly of furniture\u003c\/li\u003e\n\u003cli\u003eGreat for corner joints, center panel joints, and joints between a series of holes\u003c\/li\u003e\n\u003cli\u003eLong bolts and large tightening distance make the connectors significantly easier for assembling furniture\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4mm are compensated for\u003c\/li\u003e\n\u003cli\u003eAll connectors and accessories are at hand, cleanly packed in the Systsainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(32) Anchor bolts, SV-AB D14\u003c\/li\u003e\n\u003cli\u003e(12) Double-headed bolts, SV-DB D14\u003c\/li\u003e\n\u003cli\u003e(32) Split anchors, SV-SA D14\u003c\/li\u003e\n\u003cli\u003eDOMINO birch D 14 x 75\u003c\/li\u003e\n\u003cli\u003e(56) Cross anchors, SV-QA D14\u003c\/li\u003e\n\u003cli\u003e(48) SV-V D14 width extension table for cross anchors\u003c\/li\u003e\n\u003cli\u003e(32) Cover caps, silver\u003c\/li\u003e\n\u003cli\u003e(32) Cover caps, dark brown\u003c\/li\u003e\n\u003cli\u003e(32) Cover caps, light brown\u003c\/li\u003e\n\u003cli\u003e(1) SW 4 pin wrench for tightening the set screws\u003c\/li\u003e\n\u003cli\u003e(1) Systainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/53DKsrYqYLY\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":44569441481,"sku":"576795","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576795-1.jpg?v=1754021708"},{"product_id":"corner-connection-kv-d8-50","title":"Festool Corner Connection KV D8\/50","description":"\u003cp\u003eFor use with the \u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Festool DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility. Cover caps sold separately.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinished in just three steps: \u003c\/strong\u003eWith only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEverything like usual: \u003c\/strong\u003eThe center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fast joint: \u003c\/strong\u003eThe DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.\u003c\/p\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/domino-connector-range-kv-sys-d8\" title=\"Festool Domino DF 500 Connector Range Set product page\" rel=\"noopener\" target=\"_blank\"\u003eConnector Range Set\u003c\/a\u003e for a variety of connectors and accessories.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes\u003c\/li\u003e\n\u003cli\u003eBecause of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture\u003c\/li\u003e\n\u003cli\u003eAll joints are simple and quick to machine using the DOMINO DF 500 joiner - No additional special machine is required\u003c\/li\u003e\n\u003cli\u003eThe connectors' large tightening distance and long bolts make furniture assembly significantly easier, making cupboard assembly no problem\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture\u003c\/li\u003e\n\u003cli\u003eThe clever DOMINO system enables very simple and precise positioning of joints\u003c\/li\u003e\n\u003cli\u003ePositioned both in the cupboard panel and the base of the structure with the DOMINO Joiner DF 500 Q Plus\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 3\/4 - 1-1\/8\" (18 - 28 mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for side part:\u003c\/strong\u003e 5\/8\" (15 mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for base part:\u003c\/strong\u003e 1-1\/8\" (28 mm)\u003cbr\u003e\u003cstrong\u003eDrilling diameter in base part:\u003c\/strong\u003e 5\/8\" (15 mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(50) Split anchors\u003c\/li\u003e\n\u003cli\u003e(50) Bolts with M4 thread\u003c\/li\u003e\n\u003cli\u003e(50) Plastic trays\u003c\/li\u003e\n\u003cli\u003e(50) Cross anchors with threaded pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-AwMpYwAC9U\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139084824694,"sku":"203166","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203166-7.jpg?v=1754021696"},{"product_id":"center-panel-connector-msv-d8-25","title":"Festool Center Panel Connector MSV D8\/25","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe Festool DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility. Cover caps sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinished in just three steps: \u003c\/strong\u003eWith only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEverything like usual: \u003c\/strong\u003eThe center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fast joint: \u003c\/strong\u003eThe DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.\u003c\/p\u003e\n\u003cp\u003eCheck out the \u003ca rel=\"noopener\" title=\"Festool Domino DF 500 Connector Range Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/domino-connector-range-kv-sys-d8\" target=\"_blank\"\u003eConnector Range Set\u003c\/a\u003e for a variety of connectors and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-drilling-jig-bs-kv-d15\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDrill Template\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-hinge-cutter-kvb-hw-d15-ce\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHinge Location Cutters\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e are required for drilling holes in the surface of the joint fixture and are sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes\u003c\/li\u003e\n\u003cli\u003eBecause of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture\u003c\/li\u003e\n\u003cli\u003eAll joints are simple and quick to machine using the DOMINO DF 500 joiner - No additional special machine is required\u003c\/li\u003e\n\u003cli\u003eThe connectors' large tightening distance and long bolts make furniture assembly significantly easier, making cupboard assembly no problem\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture\u003c\/li\u003e\n\u003cli\u003eThe clever DOMINO system enables very simple and precise positioning of joints\u003c\/li\u003e\n\u003cli\u003ePositioned both in the cupboard panel and the base of the structure with the DOMINO Joiner DF 500 Q Plus\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e\u003cspan\u003e 11\/16 -1-1\/8\" (18 - 28 mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for side part:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5\/8\" (15 mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for base part:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1-1\/8\" (28 mm)\u003cbr\u003e\u003cstrong\u003eDrilling diameter in base part:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5\/8\" (15 mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(25) Split anchors\u003c\/li\u003e\n\u003cli\u003e(25) Bolts with M4 thread\u003c\/li\u003e\n\u003cli\u003e(50) Plastic trays\u003c\/li\u003e\n\u003cli\u003e(50) Cross anchors with threaded pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-AwMpYwAC9U\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139084857462,"sku":"203167","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203167-6.jpg?v=1754021694"},{"product_id":"corner-connection-kv-lr32-d8-50","title":"Festool Corner Connection KV-LR32 D8\/50","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" data-mce-fragment=\"1\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e Great for creating adjustable shelves and other furniture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Festool DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility. \u003cspan\u003eCover caps sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinished in just three steps: \u003c\/strong\u003eWith only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEverything like usual: \u003c\/strong\u003eThe center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe fast joint: \u003c\/strong\u003eThe DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out the \u003ca rel=\"noopener\" title=\"Festool Domino DF 500 Connector Range Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/domino-connector-range-kv-sys-d8\" target=\"_blank\"\u003eConnector Range Set\u003c\/a\u003e for a variety of connectors and accessories.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes\u003c\/li\u003e\n\u003cli\u003eBecause of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture\u003c\/li\u003e\n\u003cli\u003eAll joints are simple and quick to machine using the DOMINO DF 500 joiner - No additional special machine is required\u003c\/li\u003e\n\u003cli\u003eThe connectors' large tightening distance and long bolts make furniture assembly significantly easier, making cupboard assembly no problem\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture\u003c\/li\u003e\n\u003cli\u003eThe clever DOMINO system enables very simple and precise positioning of joints\u003c\/li\u003e\n\u003cli\u003ePositioned both in the cupboard panel and the base of the structure with the DOMINO Joiner DF 500 Q Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 3\/4 - 1-1\/8\" (18 - 28 mm)\u003cbr\u003e\u003cstrong\u003eDrilling diameter for Euro bolt:\u003c\/strong\u003e 1\/16\" (5 mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for base part:\u003c\/strong\u003e 1-1\/8\" (28 mm)\u003cbr\u003e\u003cstrong\u003eDrilling diameter in base part:\u003c\/strong\u003e 5\/8\" (15 mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(50) Split anchors\u003c\/li\u003e\n\u003cli\u003e(50) Bolts with M4 thread\u003c\/li\u003e\n\u003cli\u003e(50) Plastic trays\u003c\/li\u003e\n\u003cli\u003e(50) Cross anchors with threaded pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-AwMpYwAC9U\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139084890230,"sku":"203168","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203168-4.jpg?v=1754021693"},{"product_id":"center-panel-connector-msv-lr32-d8-25","title":"Festool Center Panel Connector MSV-LR32 D8\/25","description":"\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e Great for creating knockdown furniture or pre-assembling cabinetry prior to final installation.\u003c\/p\u003e\n\u003cp\u003eThe Festool DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility. Cover caps sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinished in just three steps: \u003c\/strong\u003eWith only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEverything like usual: \u003c\/strong\u003eThe center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe fast joint: \u003c\/strong\u003eThe DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.\u003c\/p\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/domino-connector-range-kv-sys-d8\" title=\"Festool Domino DF 500 Connector Range Set product page\" rel=\"noopener\" target=\"_blank\"\u003eConnector Range Set\u003c\/a\u003e for a variety of connectors and accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-drilling-jig-bs-kv-d15\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eDrill Template\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e and \u003c\/span\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-hinge-cutter-kvb-hw-d15-ce\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHinge Location Cutters\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e are required for drilling holes in the surface of the joint fixture and are sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e[TABS]\u003c\/div\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes\u003c\/li\u003e\n\u003cli\u003eBecause of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture\u003c\/li\u003e\n\u003cli\u003eAll joints are simple and quick to machine using the DOMINO DF 500 joiner - No additional special machine is required\u003c\/li\u003e\n\u003cli\u003eThe connectors' large tightening distance and long bolts make furniture assembly significantly easier, making cupboard assembly no problem\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture\u003c\/li\u003e\n\u003cli\u003eThe clever DOMINO system enables very simple and precise positioning of joints\u003c\/li\u003e\n\u003cli\u003ePositioned both in the cupboard panel in a 5mm hole in the series of holes and the base of the structure with the DOMINO Joiner DF 500 Q Plus\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003cbr\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlate thickness: \u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e3\/4 - 1-1\/8\" (18 - 28mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for side part: \u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e5\/8\" (15mm)\u003cbr\u003e\u003cstrong\u003eDOMINO routing depth for base part: \u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e1-1\/8\" (28mm)\u003cbr\u003e\u003cstrong\u003eDrilling diameter in base part: \u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e5\/8\" (15mm)\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(25) Bolts with external thread for center panel connector\u003c\/li\u003e\n\u003cli\u003e(25) Bolts with internal thread for center panel connector\u003c\/li\u003e\n\u003cli\u003e(50) Plastic trays\u003c\/li\u003e\n\u003cli\u003e(50) Cross anchors with threaded pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-AwMpYwAC9U\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139084922998,"sku":"203169","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203169-5.jpg?v=1754021691"},{"product_id":"domino-connector-range-kv-sys-d8","title":"Festool DF 500 Domino Connector Set","description":"\u003cp\u003eFor the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" title=\"All Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDomino DF 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFestool Domino Connectors make creating knock-down joinery with the DF Domino Joiner extremely simple and fast. From corner joints to center panels to joints between a series of holes, Domino Connectors allow you to assemble, separate, and reassemble your workpieces for increased flexibility. If you want to use the Domino Joiner to create flat-pack furniture, cabinets, or modular desks, these connectors are an absolute must!\u003c\/p\u003e\n\u003cp\u003eA corner joint can be created with just two Domino-routed holes and one drilled hole. The drilled hole is made with the included drilling jig and hinge cutter. Center panel joints are produced in the same way, with the only difference being that a through hole is made in the center panel. The connector is then inserted through this hole, and the bases of the two workpieces can then be attached in the usual way.\u003c\/p\u003e\n\u003cp\u003eCheck out the \"Video\" tab to see how to get started with Domino Connectors!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[TABS]\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan\u003eFeatures\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable joining system enables seamless assembly and disassembly of furniture\u003c\/li\u003e\n\u003cli\u003eGreat for corner joints, center panel joints, and joints between a series of holes\u003c\/li\u003e\n\u003cli\u003eLong bolts and large tightening distance make the connectors significantly easier for assembling furniture\u003c\/li\u003e\n\u003cli\u003eRouting and cutting tolerances of up to 1.4mm are compensated for\u003c\/li\u003e\n\u003cli\u003eAll connectors and accessories are at hand, cleanly packed in the Systsainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(70) DOMINO\/DOMINO KV D8 basic structure connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(20) DOMINO\/LR32 KV-LR32 D8 basic structure connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(20) DOMINO\/DOMINO MSV D8 center panel connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(10) DOMINO\/LR32 MSV-LR32 D8 center panel connectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(50) dark brown cover caps (KV-AK D15 brown)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(50) silver cover caps (KV-AK D15 sliver)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(50) white cover caps (KV-AK D15 white)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(50) grey cover caps (KV-AK D15 grey)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(20) Domino Tenons - 8mm x 36mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBS-KV D15 drilling jig\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKVB-HW D15 CE hinge cutter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eScrewdriver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSystainer\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/1LkIHFaHXEc?si=U8gYk8SZnjaZ0TIj\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139084955766,"sku":"576797","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/576797-1.jpg?v=1754021689"},{"product_id":"festool-domino-white-cover-caps-kv-ak-d15-50-pack","title":"Festool Domino White Cover Caps KV-AK D15 (50 Pack)","description":"\u003cp\u003eThe Festool DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach pack contains 50 Cover Caps.\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":46264903401689,"sku":"203173","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203173-1_03493513-0532-4f61-8750-e1a52ca83e02.jpg?v=1754021688"},{"product_id":"festool-beech-domino-tenons-8mm-x-36mm-130-pack","title":"Festool Beech Domino Tenons 8mm x 36mm (130 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDF 500 Domino Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 8mm, so you would need to use an \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e8mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 8mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e36\u003cspan\u003emm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e\u003cspan\u003e 8mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e 8mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139085152374,"sku":"203175","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203175-1.jpg?v=1754021686"},{"product_id":"festool-drilling-jig-bs-kv-d15","title":"Festool Drilling Template BS-KV D15","description":"\u003cp\u003eThe Domino DF 500 Drilling Template is required for drilling holes in the surface of the Domino 8mm joint fixture. The Drilling Template has a tongue which fits into the domino slot you created, giving you a precise location for the hole you need in the surface of the Domino D 8 mm joint fixture.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.oaktreesupply.com\/products\/festool-hinge-cutter-kvb-hw-d15-ce\" data-mce-href=\"https:\/\/www.oaktreesupply.com\/products\/festool-hinge-cutter-kvb-hw-d15-ce\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003eHinge Location Cutters\u003c\/span\u003e\u003c\/a\u003e, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 0.7 - 1.1 in (18 -28 mm)\u003cbr\u003e\u003cstrong\u003eDrill guide dia:\u003c\/strong\u003e 0.6\" (15 mm)\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139085676662,"sku":"203164","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203164-4.jpg?v=1754021683"},{"product_id":"festool-hinge-cutter-kvb-hw-d15-ce","title":"Festool Hinge Cutter KVB-HW D15 CE","description":"\u003cp\u003eThis Festool Hinge Cutter is used with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/festool-drilling-jig-bs-kv-d15\" title=\"Festool Drilling Template BS-KV D15 product page\" target=\"_blank\"\u003eBS-KV D15 Drill Template\u003c\/a\u003e and is sized perfectly for creating the hole you need in the surface of your DOMINO connector joint.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor use with the \u003c\/span\u003e\u003ca title=\"All Festool Domino Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/domino-joiners-menu\" target=\"_blank\"\u003eDOMINO DF 500 Joiner.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShaft Mount:\u003c\/strong\u003e CENTROTEC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 15mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e Depth Stop\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":8139085709430,"sku":"203165","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/203165-3.jpg?v=1754021681"},{"product_id":"festool-beech-domino-tenons-12mm-x-140mm-90-pack","title":"Festool Beech Domino Tenons 12mm x 140mm (90 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca rel=\"noopener\" title=\"All Festool Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" target=\"_blank\"\u003eDomino DF 700 Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 12mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e12mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 12mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e140mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 26mm\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 12mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":21869447872630,"sku":"498217","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/498217-1_eac82049-df4a-4069-a529-90633bf0c5ad.jpg?v=1754021644"},{"product_id":"lamello-p-system-connector-assortment-in-systainer-basic","title":"Lamello P-System Connector Assortment In Systainer - Basic","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis starter set is the best way to become familiar with some of Lamello's most popular P-System Connectors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClick on a connector to learn more about it!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(80) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" title=\"Lamello Clamex P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e w\/pre-loaded clips\u003ca rel=\"noopener\" title=\"Lamello Tenso Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-14-starter-kit?variant=46346961453273\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P Medius\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-14-10-flexus-p-system-connectors\" title=\"Lamello Clamex P-14\/10 Flexus P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P Flexus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-14-p-system-connectors\" title=\"Lamello Bisco P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTenso P-10\/P-14 Preload Tool\u003c\/li\u003e\n\u003cli\u003eAllen key, 4mm\u003c\/li\u003e\n\u003cli\u003eSystainer T-Loc box with divider\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\" title=\"Lamello P-System Connector Assortment In Systainer - Professional product page\" rel=\"noopener\"\u003eProfessional Set\u003c\/a\u003e with more connectors and accessories is also available.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":38021787713735,"sku":"145321","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/145314.jpg?v=1612814873"},{"product_id":"lamello-p-system-connectors-tenso-p-14","title":"Lamello Tenso P-14 (without preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter connections between 22.5° and 180° — great for obtuse angles and difficult-to-clamp workpieces\u003c\/li\u003e\n\u003cli\u003eTenso Connectors without the preload clip are ideal for smaller projects where only one or two connectors are used\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse with \u003ca rel=\"noopener\" title=\"Lamello Tenso P-14 Preload Clips product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" target=\"_blank\"\u003epreload clips\u003c\/a\u003e (sold separately) for easier and more precise alignment\u003c\/li\u003e\n\u003cli\u003eAlso available in a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-14-starter-kit\" title=\"Lamello Tenso P-14 Starter Set\" rel=\"noopener\" target=\"_blank\"\u003eStarter Set\u003c\/a\u003e with pre-load clips and installation tool included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-14 is a self-clamping connector with three functions: alignment, clamping, and connecting. The very high level of clamping force allows workpieces to be glued without the need for screw clamps or pressure. This time-saving technique allows projects to be installed piece by piece instead of being required to glue everything at the same time, clamp, and wait for glue to dry.\u003c\/p\u003e\n\u003cp\u003eThe Tenso without preload clip is ideal for smaller items of furniture when only one or two connectors are used. Smaller workpieces and 90° connections in particular are easily glued without the preload clip. Using the optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-preload-clips\" title=\"Lamello Tenso P-14 Preload Clips product page\" rel=\"noopener\" target=\"_blank\"\u003eP-14 Preload Clips\u003c\/a\u003e prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eBased on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the workpiece in just seconds. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed, and simplicity throughout the entire design, production, transport, and assembly process.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. If using the optional preload clips, snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-14 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eConcealed, self-clamping connector\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 x 27 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 33 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NGwy7pxFyn8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650369306823,"sku":"145415","price":105.0,"currency_code":"USD","in_stock":false},{"title":"300 Pair","offer_id":39650383462599,"sku":"145425","price":375.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650369339591,"sku":"145435","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-14main.jpg?v=1776709426"},{"product_id":"lamello-divario-p-18-starter-kit-with-systainer","title":"Lamello Divario P-18 Starter Kit With Systainer","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelf-clamping, completely invisible joint for inserting shelves or partitions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAssemble by sliding in between two fixed sides or shelves using a guide groove\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo resistance while inserting until shortly before clamping force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick installation with no glue or clamps required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for wall and shelving units, wine racks, large furniture, etc.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDivario Connectors make it easy to retrofit shelves or partition walls into pre-assembled cabinets and casework. A groove is routed into the edge of the shelf, where the female connector is inserted. The shelf is then slid between two fixed sides until the female connector engages and clamps onto the male connector. Because clamping occurs only at specific points, rather than along the entire insertion length, installation is smoother and requires less force.\u003c\/p\u003e\n\u003cp\u003eNeither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation, or assembly. The connector can be fully or only partially fitted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eZeta P2 only\u003c\/em\u003e: Remove the front friction tabs by carefully popping them off with a utility knife.\u003c\/li\u003e\n\u003cli\u003eMark the center of the workpiece edge where the groove will be cut.\u003c\/li\u003e\n\u003cli\u003eInstall the stop square on the Zeta. Align the Zeta’s center mark with your layout mark and lock the stop square in place.\u003c\/li\u003e\n\u003cli\u003eSet the Zeta with the bottom depth knob at 0 and the top knob at OFF. Cut the edge using the stop square reference notches: start at the center notch and stop at the right-hand notch to prevent blowout.\u003c\/li\u003e\n\u003cli\u003eSet the top knob to 18 and the bottom knob to MAX. Reinstall the friction tabs. Align the stop square with the workpiece edge and cut the Divario groove at both ends of the edge.\u003c\/li\u003e\n\u003cli\u003eInsert the female connector into the groove using the installation tool. Seat it fully with a dead-blow hammer.\u003c\/li\u003e\n\u003cli\u003eOn the mating workpiece surface, mark the centerline. Use the marking jig to mark the two 8mm hole locations by aligning the center notch and tapping the jig to create drill divots.\u003c\/li\u003e\n\u003cli\u003eDrill the 8mm holes, insert the male connectors, and tap them flush with a hammer.\u003c\/li\u003e\n\u003cli\u003eSlide the shelf (female connectors) onto the mating piece (male connectors) until fully engaged. Tap gently with a hammer if needed. (See secondary images)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDivario P-18 Connectors are available in a few different versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Lamello Divario P-18 Connectors page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-divario-p-18\" target=\"_blank\"\u003eIndividual Connectors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-connector-basic-starter-set\" target=\"_blank\" title=\"Lamello Divario P-18 Connector Basic Starter Set product page\" rel=\"noopener\"\u003eStarter Set w\/installation tool \u0026amp; plastic marking jig\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Professiona product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eP-System Connector Assortment \u003c\/a\u003e(comes with many other types of P-System Connectors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely invisible joint for the highest quality standards\u003c\/li\u003e\n\u003cli\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/li\u003e\n\u003cli\u003eEfficient machining and installation with a CNC or a Zeta based on the P-System\u003c\/li\u003e\n\u003cli\u003eNarrow element for the use in shelves with a minimum thickness of 19mm\u003c\/li\u003e\n\u003cli\u003eNo resistance while inserting until shortly before building the clamping force\u003c\/li\u003e\n\u003cli\u003eInsertion of shelves after transport for lower transport weight\u003c\/li\u003e\n\u003cli\u003eConnectors insert by hand or install by hammer or mallet\u003c\/li\u003e\n\u003cli\u003eDrilling into the surface possible with a CNC machine without angle aggregates (e.g. nesting machines)\u003c\/li\u003e\n\u003cli\u003eMachining is possible in the factory or on site with a CNC or a Zeta P2\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength\u003c\/li\u003e\n\u003cli\u003eNo clamps necessary\u003c\/li\u003e\n\u003cli\u003eTransport the empty cabinet to save weight\u003c\/li\u003e\n\u003cli\u003eAssembly of the complete piece on site possible (flat pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 x 25 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLongitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~162 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~239 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~235 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(80) Divario P-18 Connectors\u003c\/li\u003e\n\u003cli\u003eDivario Installation Tool\u003c\/li\u003e\n\u003cli\u003eMetal Marking Jig\u003c\/li\u003e\n\u003cli\u003eDrill bit \u0026amp; stop collar\u003c\/li\u003e\n\u003cli\u003eSystainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":39650372387015,"sku":"145551","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Lamello-P-18-3.jpg?v=1631122657"},{"product_id":"lamello-p-system-connectors-clamex-p-10","title":"Lamello Clamex P-10 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable, two-part connection (metal lever locks \u0026amp; unlocks connector)\u003c\/li\u003e\n\u003cli\u003eSimilar to \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e but has a shallower installation depth of 10mm, so it is ideal for thinner material\u003c\/li\u003e\n\u003cli\u003eCan be used for butt joints in material as thin as 12mm\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca rel=\"noopener\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003eIdeal for miter joints and sharp angles in furniture, kitchen manufacturing, open shelves, outside crown molding, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-10 works just like Clamex P-14, but has a shallower installation depth of 10mm. Clamex P-10 Connectors are therefore ideal for thinner materials where a deeper groove is not needed or even possible. They can also be used for miter joints in outside crown molding as thin as 15mm!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello P-System Tooling\" rel=\"noopener\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eSlide P-10 Connectors into their respective grooves.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and lock the P-10 together using a 4mm Allen Key or the flexible \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex P-10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable miter connector\u003c\/li\u003e\n\u003cli\u003eMinimal installation depth for thin materials\u003c\/li\u003e\n\u003cli\u003eNearly invisible with its 6mm tool opening\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eHigh clamping force for gluing components at all angles\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 0.5 mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 9.7mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e ~118 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e ~154 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e ~198 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5rF31Cn4tgM\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650372780231,"sku":"145372","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39650372812999,"sku":"145373","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650372845767,"sku":"145374","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/clamex-p10.jpg?v=1663173946"},{"product_id":"lamello-p-system-connectors-divario-p-18","title":"Lamello Divario P-18 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSelf-clamping, completely invisible joint for inserting shelves or partitions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAssemble by sliding in between two fixed sides or shelves using a guide groove\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo resistance while inserting until shortly before clamping force\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuick installation with no glue or clamps required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for wall and shelving units, wine racks, large furniture, etc.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDivario Connectors make it easy to retrofit shelves or partition walls into pre-assembled cabinets and casework. A groove is routed into the edge of the shelf, where the female connector is inserted. The shelf is then slid between two fixed sides until the female connector engages and clamps onto the male connector. Because clamping occurs only at specific points, rather than along the entire insertion length, installation is smoother and requires less force.\u003c\/p\u003e\n\u003cp\u003eNeither clamping aids nor adhesive are required to insert the components. As a result, the connector makes it possible to assemble the components at the most cost-effective stage in the chain, whether at production, storage, transportation, or assembly. The connector can be fully or only partially fitted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eZeta P2 only\u003c\/em\u003e: Remove the front friction tabs by carefully popping them off with a utility knife.\u003c\/li\u003e\n\u003cli\u003eMark the center of the workpiece edge where the groove will be cut.\u003c\/li\u003e\n\u003cli\u003eInstall the stop square on the Zeta. Align the Zeta’s center mark with your layout mark and lock the stop square in place.\u003c\/li\u003e\n\u003cli\u003eSet the Zeta with the bottom depth knob at 0 and the top knob at OFF. Cut the edge using the stop square reference notches: start at the center notch and stop at the right-hand notch to prevent blowout.\u003c\/li\u003e\n\u003cli\u003eSet the top knob to 18 and the bottom knob to MAX. Reinstall the friction tabs. Align the stop square with the workpiece edge and cut the Divario groove at both ends of the edge.\u003c\/li\u003e\n\u003cli\u003eInsert the female connector into the groove using the \u003ca rel=\"noopener\" title=\"Lamello Divario Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-installation-tool\" target=\"_blank\"\u003eDivario Installation Tool\u003c\/a\u003e (sold separately). Seat it fully with a dead-blow hammer.\u003c\/li\u003e\n\u003cli\u003eOn the mating workpiece surface, mark the centerline. Use the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-marking-jig\" title=\"Lamello Divario Marking Jig product page\" rel=\"noopener\" target=\"_blank\"\u003eDivario Marking Jig\u003c\/a\u003e (sold separately) to mark the two 8mm hole locations by aligning the center notch and tapping the jig to create drill divots.\u003c\/li\u003e\n\u003cli\u003eDrill the 8mm holes, insert the male connectors, and tap them flush with a hammer.\u003c\/li\u003e\n\u003cli\u003eSlide the shelf (female connectors) onto the mating piece (male connectors) until fully engaged. Tap gently with a hammer if needed. (See secondary images)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDivario P-18 Connectors are available in a few different versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Lamello Divario P-18 Connector Basic Starter Set product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-connector-basic-starter-set\" target=\"_blank\"\u003eStarter Set w\/Installation Tool \u0026amp; Plastic Marking Jig\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-divario-p-18-starter-kit-with-systainer\" title=\"Lamello Divario P-18 Starter Kit in Systainer product page\" rel=\"noopener\" target=\"_blank\"\u003eStarter Kit w\/Installation Tool, Metal Marking Jig, and Drill Bit w\/Stop Collar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Professiona product page\" rel=\"noopener\" target=\"_blank\"\u003eP-System Connector Assortment \u003c\/a\u003e(comes with many other types of P-System Connectors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely invisible joint for the highest quality standards\u003c\/li\u003e\n\u003cli\u003eJoins and clamps during insertion for perfectly closed joints\u003c\/li\u003e\n\u003cli\u003eEfficient machining and installation with a CNC or a Zeta based on the P-System\u003c\/li\u003e\n\u003cli\u003eNarrow element for the use in shelves with a minimum thickness of 19mm\u003c\/li\u003e\n\u003cli\u003eNo resistance while inserting until shortly before building the clamping force\u003c\/li\u003e\n\u003cli\u003eInsertion of shelves after transport for lower transport weight\u003c\/li\u003e\n\u003cli\u003eConnectors insert by hand or install by hammer or mallet\u003c\/li\u003e\n\u003cli\u003eDrilling into the surface possible with a CNC machine without angle aggregates (e.g. nesting machines)\u003c\/li\u003e\n\u003cli\u003eMachining is possible in the factory or on site with a CNC or a Zeta P2\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength\u003c\/li\u003e\n\u003cli\u003eNo clamps necessary\u003c\/li\u003e\n\u003cli\u003eTransport the empty cabinet to save weight\u003c\/li\u003e\n\u003cli\u003eAssembly of the complete piece on site possible (flat pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 x 25 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLongitudinal ± 1mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~162 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~239 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e~235 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6hakzHLkvjk?si=9d-himOYGltg--Dm\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39650384543943,"sku":"145550","price":125.0,"currency_code":"USD","in_stock":false},{"title":"300 Pair","offer_id":39650384576711,"sku":"145560","price":435.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39650384609479,"sku":"145570","price":1290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/divariop18-1.jpg?v=1707499826"},{"product_id":"lamello-20-biscuits-80-pack","title":"Lamello #20 Biscuits","description":"\u003cp\u003eFor use with any \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eLamello Joiner\u003c\/a\u003e or biscuit joiner with a 4mm groove cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTried-and-tested wooden biscuit\u003c\/li\u003e\n\u003cli\u003eUse with a 4mm thick blade (i.e. the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-6-tooth-carbide-cutter-classic-original\" title=\"Lamello 6 Tooth Carbide Cutter Classic Original product page\" rel=\"noopener\" target=\"_blank\"\u003eLamello 4mm Classic Cutter\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eExact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eIdeal for various applications in furniture construction and interior fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLamello original biscuits are the proven solution for wood joints. Their exact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece.\u003c\/p\u003e\n\u003cp\u003eLamello biscuits feature recessed, embossed glue surfaces for optimum glue distribution and powerful bond. As the glue dries, the wooden biscuit swells more in the glued area, making the joint even stronger. The diagonal grain also creates a very high break resistance.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca title=\"Lamello #0 Biscuits product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-0-biscuits-80-pack\" target=\"_blank\"\u003e#0\u003c\/a\u003e and \u003ca title=\"Lamello #10 Biscuits product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-10-biscuits-80-pack\" target=\"_blank\"\u003e#10\u003c\/a\u003e biscuits.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSwiss production from sustainable Swiss forestry\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eLateral tolerance allows for faster working without positioning aids and stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 56 x 23 x 4mm\u003cbr\u003e\u003cstrong\u003eCutter dimensions:\u003c\/strong\u003e 100 x 4 x 22mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness (edge cuts):\u003c\/strong\u003e 6mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Beech\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jBLdk0BPgp0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pack","offer_id":39759427666119,"sku":"144520","price":13.5,"currency_code":"USD","in_stock":true},{"title":"1,000 Pack","offer_id":40892820619463,"sku":"144020","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Lamello-wood-biscuit.jpg?v=1631121681"},{"product_id":"lamello-10-biscuits-80-pack","title":"Lamello #10 Biscuits","description":"\u003cp\u003eFor use with any \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eLamello Joiner\u003c\/a\u003e or biscuit joiner with a 4mm groove cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTried-and-tested wooden biscuit\u003c\/li\u003e\n\u003cli\u003eUse with a 4mm thick blade (i.e. the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-6-tooth-carbide-cutter-classic-original\" title=\"Lamello 6 Tooth Carbide Cutter Classic Original product page\" rel=\"noopener\" target=\"_blank\"\u003eLamello 4mm Classic Cutter\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eExact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eIdeal for various applications in furniture construction and interior fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLamello original biscuits are the proven solution for wood joints. Their exact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece.\u003c\/p\u003e\n\u003cp\u003eLamello biscuits feature recessed, embossed glue surfaces for optimum glue distribution and powerful bond. As the glue dries, the wooden biscuit swells more in the glued area, making the joint even stronger. The diagonal grain also creates a very high break resistance.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-0-biscuits-80-pack\" title=\"Lamello #0 Biscuits product page\" target=\"_blank\"\u003e#0\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-20-biscuits-80-pack\" title=\"Lamello #20 Biscuits product page\" target=\"_blank\"\u003e#20\u003c\/a\u003e biscuits.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSwiss production from sustainable Swiss forestry\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eLateral tolerance allows for faster working without positioning aids and stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 53 x 19 x 4mm\u003cbr\u003e\u003cstrong\u003eCutter dimensions:\u003c\/strong\u003e 100 x 4 x 22mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness (edge cuts):\u003c\/strong\u003e 6mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Beech\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jBLdk0BPgp0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pack","offer_id":39759446409415,"sku":"144510","price":13.5,"currency_code":"USD","in_stock":true},{"title":"1,000 Pack","offer_id":40892820914375,"sku":"144010","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Lamello-wood-biscuit_15480234-379e-4f71-a2f8-9883a4a249a7.jpg?v=1631121692"},{"product_id":"lamello-0-biscuits-80-pack","title":"Lamello #0 Biscuits","description":"\u003cp\u003eFor use with any \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eLamello Joiner\u003c\/a\u003e or biscuit joiner with a 4mm groove cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTried-and-tested wooden biscuit\u003c\/li\u003e\n\u003cli\u003eUse with a 4mm thick blade (i.e. the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-6-tooth-carbide-cutter-classic-original\" title=\"Lamello 6 Tooth Carbide Cutter Classic Original product page\" rel=\"noopener\" target=\"_blank\"\u003eLamello 4mm Classic Cutter\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eExact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eIdeal for various applications in furniture construction and interior fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLamello original biscuits are the proven solution for wood joints. Their exact and specific dimensions ensure the biscuit fits perfectly into the groove and does not fall out, even when turning over the workpiece.\u003c\/p\u003e\n\u003cp\u003eLamello biscuits feature recessed, embossed glue surfaces for optimum glue distribution and powerful bond. As the glue dries, the wooden biscuit swells more in the glued area, making the joint even stronger. The diagonal grain also creates a very high break resistance.\u003c\/p\u003e\n\u003cp\u003eAlso available in \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-10-biscuits-80-pack\" title=\"Lamello #10 Biscuits product page\" target=\"_blank\"\u003e#10\u003c\/a\u003e and \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-20-biscuits-80-pack\" title=\"Lamello #20 Biscuits product page\" target=\"_blank\"\u003e#20\u003c\/a\u003e biscuits.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSwiss production from sustainable Swiss forestry\u003c\/li\u003e\n\u003cli\u003eRecessed, embossed glue surfaces for optimum glue distribution and powerful bond\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiagonal fiber orientation for high breaking resistance\u003c\/li\u003e\n\u003cli\u003eLateral tolerance allows for faster working without positioning aids and stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 47 x 15 x 4mm\u003cbr\u003e\u003cstrong\u003eCutter dimensions:\u003c\/strong\u003e 100 x 4 x 2mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e ± 1mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness (edge cuts):\u003c\/strong\u003e 6mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Beech\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jBLdk0BPgp0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pack","offer_id":39759519252679,"sku":"144500","price":13.5,"currency_code":"USD","in_stock":true},{"title":"1,000 Pack","offer_id":40892799516871,"sku":"144000","price":56.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/Lamello-wood-biscuit_52a5216f-79f5-484b-928f-7d3a3fe49e6f.jpg?v=1631121705"},{"product_id":"lamello-p-system-connectors-clamex-p-14","title":"Lamello Clamex P-14 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDetachable furniture connection (metal lever locks \u0026amp; unlocks connector)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" rel=\"noopener\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be used for all angle \u0026amp; miter joints from 30° to 180°\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh clamping force over 200 lbs. at all angles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo gluing necessary\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIdeal for shelves, cabinets, desks, book cases, wine racks, etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse with \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P-14\/10 Medius\u003c\/a\u003e when shelves are attached to the dividing panel at the same height (Clamex P-14 can be used when dividing panel is greater than or equal to 29mm)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-14 is a detachable, two part connector that is extremely easy to install. These connectors feature an internal cam lock that is engaged with a 4mm Allen key or optional \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. Disengaging the cam lock allows you to take apart the workpiece, which is especially useful when moving or needing to utilize true flat pack delivery. Clamex P needs neither glue nor screws, saving you lots of time in the joinery process.\u003c\/p\u003e\n\u003cp\u003eClamex P-14 has a very shallow installation depth of 14mm. It can be used for miter joints in material as thin as 18mm, and for butt joints in material as thin as 15mm. These connectors are a popular choice for open shelf units, large pieces of furniture, and angled counters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 14. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eSlide P-14 Connectors into their respective grooves.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and lock the P-14 together using a 4mm Allen Key or the flexible \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex P-14 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable miter connector for 30° - 180° angles and all butt joints\u003c\/li\u003e\n\u003cli\u003eMinimal tool opening of just 6mm\u003c\/li\u003e\n\u003cli\u003eFast, simple installation\u003c\/li\u003e\n\u003cli\u003eStackable components for transport with connectors pre-installed (internal connectors means no external damage!)\u003c\/li\u003e\n\u003cli\u003eHigh clamping force over 200 lbs. per connector for joinery at all angles\u003c\/li\u003e\n\u003cli\u003eNo glue or screws needed\u003c\/li\u003e\n\u003cli\u003eOften used in furniture, shelves, book cases, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eTensile strength MDF:\u003c\/strong\u003e ~266 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength Particle board:\u003c\/strong\u003e ~235 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength Beech:\u003c\/strong\u003e ~411 lbs.\u003cbr\u003e\u003cstrong\u003eMin. workpiece width (miter joints):\u003c\/strong\u003e 18mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width (butt joints):\u003c\/strong\u003e 15mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eSize (mm):\u003c\/strong\u003e 64 x 27 x 9.7mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/t96ye8emAA8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":39940927127751,"sku":"145334","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":39940927160519,"sku":"145346","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":39940927193287,"sku":"145356","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/clamexp-14main.jpg?v=1705004959"},{"product_id":"lamello-p-system-connectors-tenso-preload-clips","title":"Lamello Tenso P-14 Preload Clips","description":"\u003cp\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUsing the P-14 Preload Clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003eAlso ideal for larger projects when several connectors must be assembled simultaneously in a row.\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"300","offer_id":39940927422663,"sku":"145426","price":85.0,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":39940927455431,"sku":"145436","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensopreloadedclip.jpg?v=1724867731"},{"product_id":"cmt-biscuit-joiner-circular-saw-blade-4","title":"CMT Biscuit Joiner Circular Saw Blade 4\"","description":"\u003cp\u003e4\" Biscuit joiner blade. Compatible with Lamello, Dewalt, Skil, Bosch, Freud, and similar biscuit joiners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter: \u003c\/strong\u003e4\"\u003cbr\u003e\u003cstrong\u003eBore diameter:\u003c\/strong\u003e 22 mm\u003cbr\u003e\u003cstrong\u003eHook angle:\u003c\/strong\u003e 18°\u003cbr\u003e\u003cstrong\u003eKerf thickness:\u003c\/strong\u003e 0.156\"\u003cbr\u003e\u003cstrong\u003ePlate thickness:\u003c\/strong\u003e 0.118\"\u003cbr\u003e\u003cstrong\u003eGrind:\u003c\/strong\u003e 10° ATB\u003c\/p\u003e","brand":"CMT","offers":[{"title":"Default Title","offer_id":42148163846361,"sku":"240.006.04","price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/240.006.04-1.jpg?v=1681922273"},{"product_id":"lamello-p-system-carbide-cutter","title":"Lamello P-System Carbide Cutter","description":"\u003cp\u003eLamello P-System Carbide Cutter for \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Biscuit Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Biscuit Joiners\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCuts P-System grooves with the Zeta P2. The carbide cutter is ideal for natural wood, especially dense hardwoods like ipe, rock maple, or quarter-sawn white oak. It can also be resharpened!\u003c\/p\u003e\n\u003cp\u003eIf you're working with abrasive materials like MDF and particle board, try the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\"\u003ediamond cutter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 100.9 x 7 x 22mm\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":42767282143449,"sku":"132141","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/132141-1_569944fb-894d-40db-8704-7cb47a34c923.jpg?v=1771448678"},{"product_id":"lamello-6-tooth-carbide-cutter-classic-original","title":"Lamello 6 Tooth Standard Groove Cutter (4mm)","description":"\u003cp\u003eCompatible with all \u003ca rel=\"noopener\" title=\"All Lamello Biscuit Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eLamello Biscuit Joiners\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 6 Tooth Carbide Cutter makes 4mm grooves with Lamello Biscuit Joiners. The 4mm groove is used with Clamex S-20, Clamex S-18, E20, C20, and K20 Connectors, along with all Lamello Wooden Biscuits. The carbide coating makes this blade ideal for denser hardwoods.\u003c\/p\u003e\n\u003cp\u003eThis is the blade that comes standard with Lamello Classic X Biscuit Joiners.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e Does not make the Zeta P-System slot.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCuts wood accurately and smoothly\u003c\/li\u003e\n\u003cli\u003eCarbide teeth add durability and longer life to the blade\u003c\/li\u003e\n\u003cli\u003eDesigned for use with the classic original biscuit joining machine\u003c\/li\u003e\n\u003cli\u003eProfessional grade saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 100 x 4 x 22mm\u003cbr\u003e\u003cstrong\u003eArbor dia.:\u003c\/strong\u003e 22mm\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":42806434267353,"sku":"132106","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/132106-1.jpg?v=1768928383"},{"product_id":"festool-beech-dominos-10-mm-x-80-mm-150-pack","title":"Festool Beech Domino Tenons 10mm x 80mm (150 Pack)","description":"\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDF 700 Domino Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 10mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e10mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural Beech hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in applications such as furniture \u0026amp; cabinetmaking, casing, and frame work\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 10mm cutters\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e80 mm\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 24 mm\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 10 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":42839470407897,"sku":"498214","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/498214-1.jpg?v=1754021476"},{"product_id":"lamello-clamex-medius-p-14-10-dividing-panel-connectors","title":"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable connectors for shelving units where two shelves meet the dividing panel at the same height\u003c\/li\u003e\n\u003cli\u003eTwo–part connector: a Clamex P-14 top half, and a Medius P-10 bottom half\u003c\/li\u003e\n\u003cli\u003eFor dividing panels as thin as 16mm\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" rel=\"noopener\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHigh clamping force over 100 lbs. at all angles\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003eIdeal for diving panel connections in shelves, cupboards, wine racks, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex Medius P-14\/10 consists of two connectors: a Clamex P-14 top half, and a Medius P-10 bottom half. As a complement to \u003ca title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14 Connectors\u003c\/a\u003e, Clamex Medius is designed for shelving units where two shelves meet the dividing panel at the same height. Common projects that would use Clamex Medius are cupboards, bookshelves, entertainment stands, and wine racks.\u003c\/p\u003e\n\u003cp\u003eClamex Medius has different installation depths. The Clamex P-14 top half (with the lever) is installed in the shelf, anchored in a 14mm deep P-System groove. The bottom half (Medius P-10) can be fitted back-to-back in a dividing panel measuring just 16mm (5\/8\") in thickness thanks to its 10mm installation depth.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Zeta P2 to make a surface cut with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSet the depth adjustment to 14 and make a cut in the edge of the shelf where you will connect it to the other workpiece to create a dividing panel.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca rel=\"noopener\" title=\"Lamello Clamex P Drill Jig Kit product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eInsert the P-14 connector into the shelf groove, and the Medius P-10 into the surface groove to join the workpieces together.\u003c\/li\u003e\n\u003cli\u003eConnect workpieces and secure the joint via the access hole using a 4mm Allen Key or the flexible \u003ca rel=\"noopener\" title=\"Lamello Clamex Installation Tool product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex Medius P-14\/10 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca rel=\"noopener\" title=\"Lamello P-System Quick Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for dividing panels in shelves, cabinets, entertainment centers, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame positioning of P-System grooves on both sides possible for dividing panels with a minimum thickness of 16mm (5\/8\")\u003c\/li\u003e\n\u003cli\u003eMinimal tool opening of just 6mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport, with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 or a CNC with P-System tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize (top half):\u003c\/strong\u003e 64 x 13.5 x 9.7mm\u003cbr\u003e\u003cstrong\u003eSize (bottom half):\u003c\/strong\u003e 52 x 7.5 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness for dividing panel:\u003c\/strong\u003e 16mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board): \u003c\/strong\u003e136 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e 178 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech):\u003c\/strong\u003e 242 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/acQy85GrK8Y\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362339225817,"sku":"145370","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362339258585,"sku":"145371","price":610.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/clamex-medius.jpg?v=1663171332"},{"product_id":"lamello-clamex-p-14-10-flexus-p-system-connectors","title":"Lamello Clamex P-14\/10 Flexus P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable, two-part connector that operates the same as Clamex P-14\/10 Medius, but has flexible positioning pins for joints in hard-to-reach applications\u003c\/li\u003e\n\u003cli\u003eCan also be used for retrofitting shelves to existing furniture\u003c\/li\u003e\n\u003cli\u003eMinimal installation depth for material as thin as 12mm for surface or corner joints\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo gluing necessary\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca rel=\"noopener\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eIdeal for furniture construction, wine racks, bookshelves, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex P-14\/10 Flexus Connectors operate the same way as \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P-14\/10 Medius\u003c\/a\u003e, except that they have flexible positioning pins. The flexible pins allow the workpiece components to be slid and “snapped” into place since the tabs retract until they find their mating half. This makes Clamex P-14\/10 Flexus ideal for joints in hard-to-reach applications, as well as for retrofitting shelves to existing furniture.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Zeta P2 to make a surface cut with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello P-System Tooling\" rel=\"noopener\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSet the depth adjustment to 14 and make a cut in the edge of the shelf where you will connect it to the other workpiece to create a dividing panel.\u003c\/li\u003e\n\u003cli\u003eUse the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-drill-jig-kit\" title=\"Lamello Clamex P Drill Jig Kit product page\" rel=\"noopener\" target=\"_blank\"\u003edrilling jig\u003c\/a\u003e to drill the access hole (Included with Zeta P2 or sold separately).\u003c\/li\u003e\n\u003cli\u003eInsert the P-14 Flexus connector into the shelf groove, and the Medius P-10 into the surface groove to join the workpieces together.\u003c\/li\u003e\n\u003cli\u003eConnect the workpieces by sliding one into the other until it snaps into place.\u003c\/li\u003e\n\u003cli\u003eSecure the joint via the access hole using a 4mm Allen Key or the flexible \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e. (Sold separately. See secondary images.)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eClamex Flexus P-14\/10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" rel=\"noopener\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal installation depth for material as thin as 12mm for surface or corner joints\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNearly invisible with its 6mm tool opening\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable for transport with connectors pre-installed\u003c\/li\u003e\n\u003cli\u003eFlexible positioning pins allow for a wide variety of installation options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 64 × 13.5 × 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 0mm\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board):\u003c\/strong\u003e ~132 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (MDF):\u003c\/strong\u003e ~158 lbs.\u003cstrong\u003e\u003cbr\u003eTensile strength (beech):\u003c\/strong\u003e ~178 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/esr0k2PtQlI\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362420359385,"sku":"145315","price":175.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362420424921,"sku":"145316","price":610.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":43362420457689,"sku":"145317","price":1825.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/flexus.jpg?v=1663173659"},{"product_id":"lamello-clamex-s-18-connectors","title":"Lamello Clamex S-18 Connectors","description":"\u003cp\u003eFor use with any \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eLamello Joiner\u003c\/a\u003e or biscuit joiner with a 4mm groove cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable, two-part connector secured by screws in an 8mm groove\u003c\/li\u003e\n\u003cli\u003eUse with any Lamello Biscuit Joiner\u003c\/li\u003e\n\u003cli\u003eGroove is created by making a double cut with a 4mm thick blade, or a single cut with an 8mm thick blade\u003c\/li\u003e\n\u003cli\u003eFor thick materials (minimum 16mm)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNearly invisible connection with 6mm access holes (colored \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-6mm-hole-cover-caps-90\" title=\"Lamello Clamex 6mm Hole Cover Caps 90° product page\" rel=\"noopener\" target=\"_blank\"\u003eCover Caps\u003c\/a\u003e available)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eVery high clamping force up to 292 lbs.\u003c\/li\u003e\n\u003cli\u003eIdeal for open shelf units, large furniture, angled counters, etc.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClamex S-18 is a detachable connector that can be used with any Lamello Biscuit Joiner. It is screwed into an 8mm groove and connected via a lever. The 8mm groove is created by making two cuts with a 4mm thick blade (i.e. the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-6-tooth-carbide-cutter-classic-original\" title=\"Lamello 6 Tooth Carbide Cutter Classic Original product page\" rel=\"noopener\" target=\"_blank\"\u003e4mm Classic Cutter\u003c\/a\u003e)or one cut with an 8mm thick blade (i.e. the \u003ca rel=\"noopener\" title=\"Lamello Clamex S Reversible Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-s-reversible-carbide-cutter\" target=\"_blank\"\u003e8mm Clamex S Reversible Carbide Cutter\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eThis connector is a popular solution for open shelf units, large pieces of furniture and angled counters, while also being used as a general gluing aid. It is also frequently employed as an aesthetic, high-quality connection for premium products.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMake your surface cut and edge cut with any biscuit joiner (cut twice for each groove if using 4mm cutter).\u003c\/li\u003e\n\u003cli\u003eUse the included marking jig to drill the 6mm access hole.\u003c\/li\u003e\n\u003cli\u003eInsert both connector halves into their grooves. Secure them with M3 X 15mm screws (included with 18 ct. only).\u003c\/li\u003e\n\u003cli\u003eConnect both workpieces and tighten the connects with a \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-installation-tool\" title=\"Lamello Clamex Installation Tool product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex Installation Tool\u003c\/a\u003e (sold separately) or a 4mm Allen key.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePractically wear-free knock-down connector\u003c\/li\u003e\n\u003cli\u003eDetachable miter connector for 30-180° angles and all butt joints\u003c\/li\u003e\n\u003cli\u003eMinimal tool opening of just 6mm\u003c\/li\u003e\n\u003cli\u003eCan be installed with any Lamello biscuit joiner\u003c\/li\u003e\n\u003cli\u003eStackable for transport, despite pre-installed connectors\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation using Classic X and Top 21 biscuit joiners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 66 × 29 × 8mm\u003cbr\u003e\u003cstrong\u003eCutter dimensions:\u003c\/strong\u003e 100 x 4 x 22mm (two cuts) or 100 x 8 x 22mm (one cut)\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eMin. material thickness:\u003c\/strong\u003e 16mm\u003cbr\u003e\u003cstrong\u003eTensile strength (particle board): ~\u003c\/strong\u003e176 lbs.\u003cbr\u003e\u003cstrong\u003eTensile strength (beech): ~\u003c\/strong\u003e292 lbs.\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yYD6orFDL4A?si=Xsd7ahyoqX0vReiM\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"18 Pair (includes marking jig and 75 screws)","offer_id":43362464104665,"sku":"145231","price":85.0,"currency_code":"USD","in_stock":true},{"title":"80 Pair (includes marking jig)","offer_id":43362464137433,"sku":"145236","price":300.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair (includes marking jig)","offer_id":43362464170201,"sku":"145241","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/clamexs18main.jpg?v=1694701092"},{"product_id":"lamello-bisco-p-14-p-system-connectors","title":"Lamello Bisco P-14 P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic biscuit that fits the same groove as the Clamex P-14 Connectors — no need to change cutters\u003c\/li\u003e\n\u003cli\u003eUsed in combination with Clamex P-14 or Tenso P-14\u003c\/li\u003e\n\u003cli\u003eFor the flush alignment of panels, as well as for \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003egluing\u003c\/a\u003e, stiffening, and increasing shear strength\u003c\/li\u003e\n\u003cli\u003eAlso good for dry-fitting connections prior to final assembly with Clamex or Tenso\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBisco P-14 plastic biscuits are an alignment element designed to be used with \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14 Connectors\u003c\/a\u003e. They ensure the flush alignment of panels, as well as increase connection strength. Bisco P Connectors are also good for dry-fitting connections prior to final assembly with \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14 Connectors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThanks to their surface structure, Bisco P-14 Connectors are self-clamping, meaning there is no gluing inside the groove required. The Bisco serves to align the workpieces and fits into the P-System groove without the need to change cutters. Ideal for dry connections or when still deciding whether the parts will be glued or should be detachable.\u003c\/p\u003e\n\u003cp\u003eBisco P-14 Connectors are available to purchase on their own, as well as in the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e and the \u003ca rel=\"noopener\" title=\"Lamello P-System Connector Assortment In Systainer - Basic product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-basic\" target=\"_blank\"\u003eBasic Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eLooking for the smaller connectors? See \u003cspan style=\"color: rgb(112, 151, 62);\"\u003e\u003cstrong\u003e\u003ca style=\"color: rgb(112, 151, 62);\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-10-p-system-connectors\" title=\"Lamello Bisco P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-10 \u0026gt;\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFits the same P-System groove as Clamex P-14, thus removing the need to change cutters\u003c\/li\u003e\n\u003cli\u003eSelf-clamping in the groove due to its surface structure\u003c\/li\u003e\n\u003cli\u003eFixed connections possible in conjunction with PVA glue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003cli\u003eAlignment of grooves on separation walls, table tops, or kitchen worktops\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-14 for detachable surface, corner or miter joints ranging from 30° to 180°\u003c\/li\u003e\n\u003cli\u003eCombination with Clamex P-14 or as a simple element for gluing workpieces\u003c\/li\u003e\n\u003cli\u003eStiffening or raising shear strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 65 x 27 x 7mm\u003cbr\u003e\u003cstrong\u003eInstallation tolerance longitudinal:\u003c\/strong\u003e ± 2mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" title=\"Lamello P-System Diamond Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" title=\"Lamello P-System Carbide Cutter product page\" rel=\"noopener\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 75mm\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/TQmQRB0eVjc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80","offer_id":43362537701593,"sku":"145301","price":50.0,"currency_code":"USD","in_stock":false},{"title":"300","offer_id":43362537734361,"sku":"145302","price":145.0,"currency_code":"USD","in_stock":true},{"title":"1000","offer_id":43362537767129,"sku":"145303","price":395.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/BiscoP14main.jpg?v=1764185813"},{"product_id":"lamello-tenso-p-10-p-system-connectors","title":"Lamello Tenso P-10 (with preload clip) P-System Connectors","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" title=\"All Lamello Joiners\" rel=\"noopener\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" title=\"Lamello CNC Tooling\" rel=\"noopener\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorks just like \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e, but has a smaller installation depth and can be used in thinner materials\u003c\/li\u003e\n\u003cli\u003eSelf-clamping, two-part connector used in combination with \u003ca rel=\"noopener\" title=\"All Glue \u0026amp; Adhesives\" href=\"https:\/\/www.oaktreesupply.com\/collections\/glue-adhesives-menu\" target=\"_blank\"\u003eglue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh clamping force allows for perfect joints without the need for clamps\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eProjects can be assembled piece by piece instead of gluing everything at the same time, clamping, and then waiting for glue to dry\u003c\/li\u003e\n\u003cli\u003eFor miter and bevel connections\u003c\/li\u003e\n\u003cli\u003eUse with preload clips for precise alignment and more adjustability\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses. Developed for miters (45°) from a material thickness of 15mm or butt joints (90°) from a panel thickness of 12mm, the Tenso P-10 is ideal for glued furniture, components, small shelving units, door frames, trim, false edges, cubbies, plate racks, etc.\u003cbr\u003e\u003cbr\u003eUsing the preload clips prior to gluing makes aligning and engaging the two halves of the Tenso Connector very easy. These clips considerably reduce the required amount of force when connecting the workpieces, and also give you more adjustability before gluing and securing the joint permanently. This is especially useful for applications like face frame installation on cabinet boxes or for clamping miters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCut grooves with a Zeta P2 with the depth adjustment set to 10. You can also use a CNC equipped with \u003ca rel=\"noopener\" title=\"Lamello P-System Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eP-System tooling\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eInsert each half of the connector into their respective grooves. Use the preload clip installation tool to snap those into place.\u003c\/li\u003e\n\u003cli\u003eApply glue, then join the two workpieces together. The self-clamping element combined with the glue will quickly create a permanent connection. (See secondary images)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eHelpful tip:\u003c\/strong\u003e When applying glue, apply some to the inside slot of the female connector half. This increases connection strength by up to 25%.\u003c\/p\u003e\n\u003cp\u003eTenso P-10 Connectors are available to purchase on their own, as well as in the \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connector-assortment-in-systainer-professional\" title=\"Lamello P-System Connector Assortment In Systainer - Pro product page\" rel=\"noopener\" target=\"_blank\"\u003eProfessional Starter Set\u003c\/a\u003e. These starter sets are a great way to become familiar with Lamello's full line of P-System Connectors. Plus, you'll always have a nice Systainer to store your connectors in for years to come!\u003c\/p\u003e\n\u003cp\u003eCompare P-System Connectors with our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Lamello_P_System_quick_guide.pdf?v=1724942914\" title=\"Lamello P-System Quick Guide\" rel=\"noopener\" target=\"_blank\"\u003eQuick Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: All Tenso P-10 boxes are sold with the corresponding amount of pre-load clips and one pre-load clip installation tool.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFor thin materials\u003c\/li\u003e\n\u003cli\u003eHigh level of clamping force eliminates need for clamps or shims\u003c\/li\u003e\n\u003cli\u003eCompletely invisible joint for an aesthetic, uniform look\u003c\/li\u003e\n\u003cli\u003eLateral tolerance for efficient installation with the Zeta P2 profile groove biscuit joiner or a CNC machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 52 x 19 x 9.7mm\u003cbr\u003e\u003cstrong\u003eCutter dia.:\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"Lamello P-System Diamond Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-diamond-cutter\" target=\"_blank\"\u003e100.4 x 7 x 22mm\u003c\/a\u003e or \u003ca rel=\"noopener\" title=\"Lamello P-System Carbide Cutter product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-carbide-cutter\" target=\"_blank\"\u003e100.9 x 7 x 22mm\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eInstallation tolerance:\u003c\/strong\u003e Longitudinal ± 1 mm\u003cbr\u003e\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 30 lbs. per connector\u003cbr\u003e\u003cstrong\u003eMin. workpiece width:\u003c\/strong\u003e 65mm\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/y7KEsFOZINI?si=ZzA_FPxUIM-fvAyc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Lamello","offers":[{"title":"80 Pair","offer_id":43362580693209,"sku":"145418","price":125.0,"currency_code":"USD","in_stock":true},{"title":"300 Pair","offer_id":43362580725977,"sku":"145428","price":420.0,"currency_code":"USD","in_stock":true},{"title":"1000 Pair","offer_id":43362580758745,"sku":"145438","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/Tensop-10withclipmain.jpg?v=1765983421"},{"product_id":"lamello-p-system-connector-assortment-in-systainer-professional","title":"Lamello P-System Connector Assortment In Systainer - Professional","description":"\u003cp\u003e\u003cspan\u003eFor use with \u003ca rel=\"noopener\" title=\"All Lamello Joiners\" href=\"https:\/\/www.oaktreesupply.com\/collections\/lamello\/type_biscuit-joiners\" target=\"_blank\"\u003eZeta P2 Handheld Joiners\u003c\/a\u003e \u003c\/span\u003e\u003cspan\u003eor \u003ca rel=\"noopener\" title=\"Lamello CNC Tooling\" href=\"https:\/\/www.oaktreesupply.com\/collections\/all-lamello-cnc-tooling\" target=\"_blank\"\u003eCNC Router with P-System tooling\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis starter set is the best way to become familiar with Lamello's line of P-System Connectors. It even includes the necessary accessories for a seamless joining process, like the Clamex Drill Bit used to make the 6mm access hole, the flexible Clamex Installation Tool, and the Divario Installation Tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClick on a connector to learn more about it!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(120) \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-14\" target=\"_blank\"\u003eClamex P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex Medius P-14\/10 Dividing Panel P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-medius-p-14-10-dividing-panel-connectors\" target=\"_blank\"\u003eClamex P Medius\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Clamex P-14\/10 Flexus P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-clamex-p-14-10-flexus-p-system-connectors\" target=\"_blank\"\u003eClamex P Flexus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-clamex-p-10\" title=\"Lamello Clamex P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eClamex P-10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca rel=\"noopener\" title=\"Lamello Tenso P-14 (without preload clip) P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-tenso-p-14\" target=\"_blank\"\u003eTenso P-14\u003c\/a\u003e w\/clip\u003c\/li\u003e\n\u003cli\u003e(30) \u003ca rel=\"noopener\" title=\"Lamello Tenso P-10 (with preload clip) P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-tenso-p-10-p-system-connectors\" target=\"_blank\"\u003eTenso P-10\u003c\/a\u003e w\/clip\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-14-p-system-connectors\" title=\"Lamello Bisco P-14 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-14\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(20) \u003ca href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-bisco-p-10-p-system-connectors\" title=\"Lamello Bisco P-10 P-System Connectors product page\" rel=\"noopener\" target=\"_blank\"\u003eBisco P-10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e(80) \u003ca rel=\"noopener\" title=\"Lamello Divario P-18 P-System Connectors product page\" href=\"https:\/\/www.oaktreesupply.com\/products\/lamello-p-system-connectors-divario-p-18\" target=\"_blank\"\u003eDivario P-18\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDivario Installation Tool\u003c\/li\u003e\n\u003cli\u003eClamex Drill bit with jig\u003c\/li\u003e\n\u003cli\u003eClamex P Installation Tool\u003c\/li\u003e\n\u003cli\u003eSortainer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lamello","offers":[{"title":"Default Title","offer_id":43362667528409,"sku":"145323","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/files\/145323-1.jpg?v=1729863752"},{"product_id":"festool-sipo-dominos","title":"Festool Sipo Domino Tenons 5mm x 30mm (300 Count)","description":"\u003cp\u003eFestool Sipo Domino Tenons are made from all-natural, solid hardwood for strength and stability. Because sipo is weatherproof as well as durable against fungi and termites, these tenons are ideal for outdoor applications such as decks, exterior trim, and outdoor furniture.\u003c\/p\u003e\n\u003cp\u003eFestool Domino tenons serve as a true floating tenon in mortise-and-tenon applications such as furniture and cabinetmaking, casing, and frame work. Domino tenons feature a flat, elongated design that will not rotate, ensuring perfect alignment for both edge and face gluing. The dense beech material will not expand, leaving you with clean, flat, and consistent surfaces.\u003c\/p\u003e\n\u003cp\u003eDomino tenons are embossed with glue pockets and are approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Suitable for both plywood and solid wood applications.\u003c\/p\u003e\n\u003cp\u003eFor use with the \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/festool\/type_domino-joiners\" title=\"All Festool Domino Joiners\" rel=\"noopener\" target=\"_blank\"\u003eDF 500 Domino Joiner\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure which cutters to use?\u003c\/strong\u003e The size of the cutter depends on the height of the Domino tenon. These tenons have a height of 5mm, so you would need to use a \u003ca href=\"https:\/\/www.oaktreesupply.com\/collections\/all-domino-cutters\" title=\"All Domino Cutters\" rel=\"noopener\" target=\"_blank\"\u003e5mm cutter\u003c\/a\u003e to make the correct size groove.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAll-natural, solid sipo hardwood for strength and stability\u003c\/li\u003e\n\u003cli\u003eServes as a true floating tenon in outdoor applications such as decks, exterior trim, and outdoor furniture\u003c\/li\u003e\n\u003cli\u003eFlat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing\u003c\/li\u003e\n\u003cli\u003eUse with 5mm cutters\u003c\/li\u003e\n\u003cli\u003eWeatherproof\u003c\/li\u003e\n\u003cli\u003eFSC-certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003e\u003cspan\u003e30mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e\u003cspan\u003e 19mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e\u003cspan\u003e 5mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kBDehso3Z7g\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e[\/TABS]\u003c\/span\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43535315566809,"sku":"494869","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2751\/products\/494869-1.jpg?v=1754021440"}],"url":"https:\/\/www.oaktreesupply.com\/collections\/all-handheld-joiner-accessories\/type_lamello-system-connectors.oembed","provider":"OakTree Supply","version":"1.0","type":"link"}